Onkyo HT-R557 Manual
Onkyo HT-R557, size: 2.7 MB
Here you can find all about Onkyo HT-R557 like manual and other informations. For example: receiver.
Onkyo HT-R557 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Onkyo HT-R557 please write about it to help other people. [ Report abuse or wrong photo | Share your Onkyo HT-R557 photo ]
User reviews and opinions
|renderteam||4:21pm on Thursday, September 9th, 2010|
|sounds good and has lots of connections went out within 4 months and having it repaired by "onkyo certified repair centers is a nightmare" not to ment...|
|thanxpleaze||3:07am on Monday, August 30th, 2010|
|I replaced the speakers with some decent Polk ones and considered the Onkyo speaker "system" a total loss for this purchase tuner has a ton of flexib...|
|fbnsantos||10:05am on Tuesday, August 3rd, 2010|
|I decided to replace a component receiver with this product and am quite happy with it after 2 days. Solid sound. Easy setup. This unit replaces a 12 year old Onkyo unit so most of my speaker locations were already wired. I removed the old speakers.|
|comino||2:11pm on Friday, May 21st, 2010|
|Got this on sale $499 and free shipping, if you see this for that price and are thinking about getting one dont let this pass and get a cheaper model. If you want a good over package this a great deal.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
* iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
Important Safety Instructions..2 Precautions..3 Speaker Precautions..4 Package Contents..4 Features..6 Getting to Know the AV Receiver.9 Remote Controller..12 Speakers..17
Playing Your AV Components. 42
Basic AV Receiver Operation. 42 Using the Multichannel DVD Input. 43 Displaying Source Information.. 43
Listening to the Radio.. 44
Listening to AM/FM Stations.. 44 Presetting AM/FM Stations.. 45
RI Dock DS-A1X for the iPod. 46 Common Functions.. 49
Setting the Display Brightness.. 49 Adjusting the Bass and Treble.. 49 Muting the AV Receiver.. 49 Using the Sleep Timer.. 50 Using Headphones.. 50 Adjusting Speaker Levels.. 50
Connecting Your Speakers..18 Connecting Antennas.21 Connecting Your Components.23
About AV Connections..23 Connecting Audio and Video Signals to the AV Receiver.24 Which Connections Should I Use?.24 TV or Projector..25 DVD player..26 Components with HDMI..28 VCR or DVD Recorder for Playback.29 VCR or DVD Recorder for Recording..30 Camcorder, Games Console, or Other Device...30 Satellite, Cable, Set-top box, or Other Video Source..31 CD Player or Turntable..32 DS-A1X RI Dock for the iPod.33 Cassette, CDR, MiniDisc, or DAT Recorder..34 Connecting Onkyo Components..35 Connecting the Power Cord.35
Enjoying the Listening Modes
Using the Listening Modes.. 51
Selecting Listening Modes. 52 About the Listening Modes.. 53 Using the Late Night Function (Dolby Digital only).. 54 Using the CinemaFILTER.. 54 Using the Audio Adjust Settings.. 54
Recording.. 56 Advanced Setup.. 57
Advanced Speaker Settings.. 57 Digital Input Signal Formats.. 62 Correcting Sound and Picture Sync. 62
Controlling Other Components.. 63
Turning On & First Time Setup
Turning On the AV Receiver..36 First Time Setup..37
Automatic Speaker Setup (Audyssey 2EQ)..37 HDMI Video Setup..40 Digital Audio Input Setup..41 Changing the Input Display..41
Entering Remote Control Codes.. 63 Remote Control Codes for Onkyo Components Connected via. 64 Resetting REMOTE MODE Buttons. 64 Resetting the Remote Controller. 64
If you cant resolve an issue, try resetting the AV receiver by holding down the [VCR/DVR] button and pressing the [STANDBY/ON] button.
A DIGITAL IN OPTICAL 1, 2 and COAXIAL 1, 2
These optical and coaxial digital audio inputs are for connecting components with optical or coaxial digital audio outputs, such as CD and DVD players.
B HDMI IN 1, 2, and OUT
These jacks are for connecting HDMI-compatible components. Audio and video signals received by the HDMI IN jacks pass through to the HDMI OUT jack.
K CD IN
C COMPONENT VIDEO
A DVD player, TV, or other component that supports component video can be connected here.
L TAPE IN/OUT
This analog audio input and output are for connecting a recorder with an analog audio input and output, such as a cassette deck, MD recorder, etc.
D AM ANTENNA
These push terminals are for connecting an AM antenna.
E FM ANTENNA
This jack is for connecting an FM antenna.
M CBL/SAT IN and VCR/DVR IN/OUT
The CBL/SAT inputs can be used to connect a cable/satellite receiver, set-top box, etc. The VCR/DVR inputs and outputs can be used to connect a VCR or DVR (digital video recorder).
F MONITOR OUT
The S-Video or composite video output should be connected to a video input on your TV or projector.
N DVD IN
These jacks can be used to connect a DVD player with an analog multichannel audio output for SACD and DVD-Audio playback.
G SIRIUS antenna
This jack is for connecting a SIRIUS Satellite Radio antenna (see the separate SIRIUS instructions).
H XM antenna
This jack is for connecting an XM Passport System, sold separately (see the separate XM instructions).
O SUBWOOFER PRE OUT
A powered subwoofer can be connected here.
I FRONT SPEAKERS, SURROUND
SPEAKERS, and CENTER SPEAKER These terminal posts are for connecting the front, center, and surround speakers.
See pages 1835 for hookup information.
Installing the Batteries Aiming the Remote Controller
When using the remote controller, point it toward the AV receivers remote control sensor, as shown below.
Remote control sensor AV receiver STANDBY indicator
To open the battery compartment, press the small hollow and slide open the cover.
Insert the two supplied batteries (AA/R6) in accordance with the polarity diagram inside the battery compartment.
Approx. 16 ft. (5 m)
Slide the cover shut.
Notes: The remote controller may not work reliably if the AV receiver is subjected to bright light, such as direct sunlight or inverter-type uorescent lights. Keep this in mind when installing. If another remote controller of the same type is used in the same room, or the AV receiver is installed close to equipment that uses infrared rays, the remote controller may not work reliably. Dont put anything on top of the remote controller, such as a book or magazine, because a button may be pressed continuously, thereby draining the batteries. The remote controller may not work reliably if the AV receiver is installed in a rack behind colored glass doors. Keep this in mind when installing. The remote controller will not work if theres an obstacle between it and the AV receivers remote control sensor.
The following illustration shows which speaker should be connected to each pair of terminals.
Using the Speaker Terminal Tool
The supplied speaker terminal tool makes it easy to tighten and loosen the speaker terminals. If you are using banana plugs, to ensure optimum sound quality, tighten the speaker terminal before inserting the banana plug.
Surround Surround Front right right left speaker speaker speaker Center speaker
Front left speaker
FRONT SURROUND CENTER
Center Speaker Base
Use the center speaker base to mount the center speaker horizontally. If you place the speaker and its base on top of a TV or an entertainment center, adjust the angle of the speaker so that it faces toward the listening position. The center speaker should be installed on the base securely. If the speaker is loose, try adjusting the position so that it sits securely on the base. The cradle surface of the base features two stoppers to prevent the speaker from moving. Therefore, you can tilt the speaker toward the front by up to 11 degrees.
The speakers can easily be wall mounted by using the keyhole slots. To prevent the speaker from vibrating against the wall, attach four of the supplied rubber spacers to the rear of each speaker. Mounting vertically To mount the speakers vertically, use the one keyhole slot shown to hang each speaker on the screw that is securely screwed into the wall.
Keyhole slot for wall mounting Stoppers Base for horizontal mounting
Using the included rubber spacers We recommend using the supplied rubber spacers to achieve the best possible sound from your speakers. The rubber spacers prevent the speakers from moving, providing a more stable setup.
Rubber spacer Front
Mounting horizontally To mount the speakers horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall.
Keyhole slot for wall mounting
Bottom of the bass
The plaque of each speaker rotates so that you can position the speakers upside down. Caution: A mounting screws ability to support a speaker depends on how well its anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 3/8" or less and a shank diameter of 1/8" or less. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes. Leave a gap of between 1/4" Wall and 5/16" between the wall and the base of the screw head, as shown. (We recommend that you consult a home installation profes1/4" 5/16" sional.)
Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions). To prevent interference, keep audio and video cables away from power cords and speaker cables.
AV Cables and Jacks
Y Y PB
HDMI connections can carry uncompressed standard- or high-denition digital video and audio and offer the best picture and sound quality.
Component video cable
Component video separates the luminance (Y) and color difference signals (PR, PB), providing the best picture quality. (Some TV manufacturers label their component video jacks slightly differently.) S-Video separates the luminance and color signals and provides better picture quality than composite video. Composite video is commonly used on TVs, VCRs, and other video equipment. Use only dedicated composite video cables.
Composite video cable
Cable Optical digital audio cable Jack
This offers the best sound quality and allows you to enjoy Dolby Digital and DTS. The audio quality is the same as for coaxial. This offers the best sound quality and allows you to enjoy Dolby Digital and DTS. The audio quality is the same as for optical. This cable carries analog audio. Its the most common connection format for analog audio and can be found on virtually all AV components. This cable carries multichannel analog audio and is typically used to connect DVD players with a 5.1channel analog audio output. Several standard analog audio cables can be used instead of a multichannel cable.
Coaxial digital audio cable
Analog audio cable (RCA)
Multichannel analog audio cable (RCA)
Connecting Your ComponentsContinued
Connecting Audio and Video Signals to the AV Receiver
By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver.
: Signal Flow Video Audio Video Audio TV, projector, etc.
Speakers (see page 19 for hookup details) DVD player, etc.
Which Connections Should I Use?
The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your other components. Use the following sections as a guide. For video components, such as a DVD player, you must make an audio connection and a video connection.
Audio Connection Formats
When choosing a connection format, bear in mind that the AV receiver doesnt convert between formats.
Video Connection Formats
Video equipment can be connected by using any one of the following video connection formats: composite video, S-Video, or component video, the latter offering the best picture quality. When choosing a connection format, bear in mind that the AV receiver doesnt convert between formats, so only outputs of the same format as the input will output the signal.
Turn on the AV receiver. Put the speaker setup microphone at measurement point 1 (page 37), and connect it to the SETUP MIC jack.
Audyssey 2EQ performs more measurements. This takes a few minutes.
When the following display appears, move the speaker setup microphone to measurement point 3 (page 37), and then press [ENTER].
Notes: Make sure the microphone is horizontal. If theres an obstacle between the microphone and any speaker, the automatic setup will not work correctly. Set up the room as you would when enjoying a DVD. Positioning the microphone close to where your ears would normally be will provide better results. You can adjust the height of the microphone by using a tripod or level table.
Audyssey 2EQ performs more measurements. This takes a few minutes. When the measurements are complete, the results are calculated and saved automatically.
Press [ENTER]. The automatic speaker setup starts.
A test tone is output by each speaker in turn, as the Audyssey 2EQ function determines which speakers are connected. This takes a few minutes. Note: If any extraneous noise is picked up by the microphone, the automatic setup may not work correctly, so dont make any noise.
When the automatic speaker setup is complete, disconnect the speaker setup microphone.
Notes: When the automatic speaker setup is complete, the Equalizer Settings (page 61) will be set to Audyssey. You can cancel the automatic speaker setup at any point in this procedure simply by disconnecting the setup microphone.
While the automatic speaker setup is in progress, one of the following error messages may appear: Ambient noise is too high
Changing the Speaker Settings Manually
In some situations, the measurements taken by the automatic speaker setup may not provide usable results. If running the speaker setup a second time still doesnt provide usable results, youll have to set the speaker settings manually (see pages 5761).
This message appears if theres too much background noise and the measurements cannot be performed properly. Remove the source of the noise and try again. Speaker Detect Errors
Using a Powered Subwoofer
If youre using a powered subwoofer, because it outputs very low-frequency sound and its position is usually low down, it may not be detected by the automatic speaker setup. In this case, increase the subwoofers volume, set it to its highest crossover frequency, and then try running the automatic speaker setup again. Note that if the volume is set too high and the sound distorts, it may not be detected, so use an appropriate volume level. If the subwoofer has a low-pass lter switch, set it to Off or Direct. Refer to your subwoofers instruction manual for details.
This message appears if one of the speaker-related errors below occurs. One of the front speakers has not been detected. One of the surround speakers has not been detected. The number of speakers detected on the second or third measurment was different to the number detected on the rst measurement. Write Error
This message appears if saving fails.
To Retry the Automatic Speaker Setup
Press the [ENTER] button. Make sure speakers that cannot be detected are connected properly.
HDMI Video Setup
If you connect a video component to HDMI IN 1 or 2, use this setting to assign that input to an input selector.
Press the [RECEIVER] button, followed by the [SETUP] button.
Use the Up and Down [ ]/[ ] buttons to select Video Input, and then press [ENTER].
Use the Up and Down [ ]/[ ] buttons to select HDMI DVD, HDMI VCR, or HDMI CBL and use the Left and Right [ ]/[ ] buttons to change the setting. If you connect a video component to HDMI IN 1 or 2, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI DVD setting to IN1. IN1: Select if the video component is connected to HDMI IN 1. IN2: Select if the video component is connected to HDMI IN 2. No: Select if youre not using the HDMI OUT.
Press the [SETUP] button. Setup closes.
Digital Audio Input Setup Changing the Input Display
If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT or CBL/SAT IN jacks, for to work properly, you must change this setting. This setting can only be changed on the AV receiver.
To enjoy Dolby Digital and DTS, you must connect your DVD player to the AV receiver digitally (coaxial or optical). These are the default digital audio input assignments.
Input selector DVD VCR/DVR CBL/SAT TAPE CD AUX Default assignment COAX 1 OPT 1 COAX 2 ---OPT 2 ----
Press the [TAPE] or [CBL/SAT] input selector button so that TAPE or CBL/SAT appears on the display.
You can change the digital audio input assignments if necessary. For example, if you connect your DVD player to the OPTICAL 1 DIGITAL IN (OPT1), you must assign that input to the DVD input selector, as follows.
DVD VCR/DVR CBL/SAT
Press the input selector button for the input selector that you want to assign. (Digital inputs cannot be assigned to the TUNER input selector.)
Press and hold down the [TAPE] or [CBL/SAT] input selector button (about 2 seconds) to change the setting. Repeat this step to select MD, CDR, or DOCK. For the TAPE input selector, the setting changes in this order: TAPE MD CDR DOCK For the CBL/SAT input selector, the setting changes in this order: CBL/SAT DOCK
Press the [DIGITAL INPUT] button. The current assignment appears.
Press the [DIGITAL INPUT] button repeatedly to select COAX1, COAX2, OPT1, OPT2, or (analog).
Note: DOCK can be selected for the TAPE input selector or CBL/SAT input selector, but not both at the same time.
Note: Make sure that components connected digitally are congured to output digital audio. Refer to the relevant manuals.
Basic AV Receiver Operation
Subwoofers rear panel
AV receiver Remote controller
Use the AV receivers input selector buttons to select the input source. To select the input source with the remote controller, press the [RECEIVER] REMOTE MODE button, and then use the INPUT SELECTOR buttons.
Start playback on the source component. To watch a DVD or other video source, on your TV, select the video input thats connected to the AV receivers MONITOR OUT jack. If your TV is connected to the HDMI OUT, see the tip on page 28. To adjust the volume, use the MASTER VOLUME control, or the remote controllers [VOL] button. The volume can be set to MIN, 1 through 79, or MAX. Since the AV receiver is designed for home theater enjoyment, it has a wide volume range for precise adjustment. To set the level of the subwoofer, use the OUTPUT LEVEL control. Because our ears are less sensitive to very low bass sounds, theres a temptation to set the level of the subwoofer too high. As a rule of thumb, set the subwoofer level to what you think is the optimal level, and then back it off slightly.
You can store a combination of up to 40 of your favorite AM/FM radio stations as presets.
Tune into the AM/FM station that you want to store as a preset.
DS-A1X RI Dock for the iPod
About the RI Dock
With the Onkyo RI Dock, you can easily play the music stored on your Apple* iPod* through the AV receiver and enjoy great sound, and watch iPod slideshows and videos on your TV. You can use the AV receivers remote controller to operate your iPod. , which stands for Remote Interactive, is an exclusive Onkyo control system that allows all -capable Onkyo audio components to be turned on or off together, and the AV receiver to turn on automatically and select the appropriate input source when playback is started on a source component. It also allows you to control your iPod with the AV receivers remote controller. In this manual, the DS-A1X Remote Interactive Dock is referred to as the RI Dock.
Getting to Know the RI Dock
iPod adapter iPod connector
Power indicator iPod slot VIDEO OUT jack jack
For the latest information on the RI Dock, see the Onkyo Web site at: www.onkyo.com
DS-A1X Package Contents
DS-A1X Remote Interactive Dock AC adapter (1.4 m, 4.5 ft.) AUDIO OUT L/R jacks DC IN 5V 1A jack
AV cable (1.5 m, 5 ft.)
cable (1.8 m, 6 ft.)
RI MODE switch Set it to match the AV receivers input display (see below).
Made for: 5th Generation iPod (iPod with video) iPod photo (iPod with color display) 4th Generation iPod 2nd Generation iPod nano 1st Generation iPod nano iPod mini Note: 3rd generation iPods are not supported. Before using the RI Dock, update your iPod with the latest software, available from the Apple Web site at: www.apple.com
AV receiver input display
MD TAPE CD-R HDD/DOCK MD TAPE CD-R HDD/DOCK MD TAPE CD-R HDD/DOCK MD TAPE CD-R HDD/DOCK
RI MODE switch
See page 41 for details on changing the Input Display. To control your iPod with the AV receivers remote controller, select the DOCK remote control mode.
DS-A1X RI Dock for the iPodContinued
Putting Your iPod in the RI Dock
1. Plug in the AC adapter. 2. Turn on the AV receiver, and select the appropriate inputs on the AV receiver. 3. Align your iPod with the RI Docks iPod slot, and carefully place your iPod in the slot, as shown.
Basic Operation Note: The AV receiver may take several seconds to startup, so you might not hear the rst few seconds of the rst song. System On Function: When you turn on the AV receiver, the iPod turns on as well. System Off Function: When you turn off the AV receiver, the iPod turns off as well. Auto Power On Function*: If you start iPod playback while the AV receiver is on Standby, the AV receiver will automatically turn on and select your iPod as the input source. Then, your iPod will start playback.
This section explains functions that can be used with any input source.
Adjusting the Bass and Treble
You can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected.
Press [RECEIVER] rst
Press the AV receivers [TONE] button repeatedly to select either Bass or Treble.
Use the TONE /[+] buttons to adjust.
Bass You can boost or cut low-frequency sounds output by the front speakers from 10 dB to +10 dB in 2 dB steps. Treble You can boost or cut high-frequency sounds output by the front speakers from 10 dB to +10 dB in 2 dB steps.
AUDIO SUBTITLE RANDOM REPEAT
CH SEL PLAY MODE
L NIGHT CINE FLTR HDD DVD
Note: To bypass the bass and treble tone circuits, select the Direct listening mode.
Muting the AV Receiver
You can temporarily mute the output of the AV receiver.
TONE, , +
Press the remote controllers [MUTING] button. The output is muted and the MUTING indicator ashes on the display.
Setting the Display Brightness
You can adjust the brightness of the display. Press the remote controllers [DIMMER] button repeatedly to select: dim, dimmer, or normal brightness. Alternatively, you can use the AV receivers [DIMMER] button.
To unmute the AV receiver, press the remote controllers [MUTING] button again, or adjust the volume. The output is unmuted and the MUTING indicator goes off. Muting is cancelled when the AV receiver is set to Standby.
Using the Sleep Timer
With the sleep timer, you can set the AV receiver so that it turns off automatically after a specied period. Press the remote controllers [SLEEP] button repeatedly to select the required sleep time. You can set the sleep time from 90 to 10 minutes in 10 minute steps. The SLEEP indicator appears on the display when the sleep timer has been set, as shown. The specied sleep time appears on the display for about 5 seconds, then the previous display reappears.
T-D Listening Angle Setting
Lstn Angl (Listening Angle) With this setting, you can specify the angle of the front left and right speakers relative to the listening position. Processing for the Theater-Dimensional listening mode is based on this setting. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the three available settings.
Front left speaker Front right speaker
PLII Music Mode Settings
These settings apply to only 2-channel (stereo) sources. Panorama With this setting, you can broaden the width of the front stereo image when using the Pro Logic II Music listening mode. On: Panorama function on. Off: Panorama function off (default). Dimension With this setting, you can move the sound eld forward or backward when using the Pro Logic II Music listening mode. The default value is 0. It can be adjusted from 3 to +3. Higher settings move the sound eld forward. Lower settings move it backward. If the stereo image feels too wide, or theres too much surround sound, move the sound eld forward to improve the balance. Conversely, if the stereo image feels like its in mono, or theres not enough surround sound, move it backward. Center Width With this setting, you can adjust the width of the sound from the center speaker when using the Pro Logic II Music listening mode. Normally, the center channel sound is output by only the center speaker. (If youre not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting adjusts the front left, right,
Narrow: Select if the listening angle is 20 degrees. Middle: Select if the listening angle is 30 degrees (default). Wide: Select if the listening angle is 40 degrees.
Multichannel Subwoofer Setting
SW Sens On some DVD players, the signal from the multichannel subwoofer output is 15 dB higher than normal. You can change the subwoofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the SUBWOOFER input jack of the multichannel DVD input. You can select 0 dB (default), +5 dB, +10 dB, or +15 dB. If you nd that your subwoofer is too loud, try the +10 dB or +15 dB setting.
This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.
Recording Audio and Video from Separate Sources
You can overdub audio onto your video recordings by simultaneously recording audio and video from two separate sources. This is possible because only the audio source is switched when an audio-only input source, such as TAPE, TUNER, or CD, is selected, the video source remains the same. In the following example, audio from the CD player connected to the CD IN jacks, and video from the camcorder connected to the AUX INPUT VIDEO jack are recorded by the VCR connected to the VCR/DVR OUT jacks.
These settings are set automatically by the Automatic Speaker Setup function (see page 37). With these settings, you can specify the distance from each speaker to the listening position.
Measure and make a note of the distance from each speaker to the listening position. Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button.
Use the Up and Down [ ]/[ ] buttons to select Sp Distance, and then press [ENTER].
Notes: The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m). The Surround distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Surr Right, and Surr Left distances can be set between 5 and 25 ft. (1.5 and 7.5 m). The speaker distance cannot be adjusted while a pair of headphones is connected, or the multichannel DVD input is being used.
While Unit is displayed, use the Left and Right [ ]/[ ] buttons to select feet or meters. feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps. meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps. Use the Down [ ] button to select Front, and use the Left and Right [ ]/[ ] buttons to specify the distance for the front speakers, then press the Down [ ] button to select the next speaker. Repeat step 5 for all speakers. Note: Speakers that you set to No or None in the Speaker Conguration (page 57) cannot be selected.
These settings are set automatically by the Automatic Speaker Setup function (see page 37). You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.
Press the [SETUP] button. Setup closes. Dont forget to turn down the volume if you turned it up while setting the levels.
Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button.
Notes: A quick way to adjust the speaker levels is to press the remote controllers [TEST TONE] button to turn on the test tone, use the [LEVEL] and [LEVEL+] buttons to adjust the levels, and use the [CH SEL] button to select the speakers. The speaker levels cannot be adjusted while a pair of headphones is connected, or the AV receiver is muted.
Digital Input Signal Formats
The following table shows the display indicator for each digital signal format.
Format Dolby Digital DTS PCM PCM
Correcting Sound and Picture Sync
When using progressive scanning on your DVD player, you may nd that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it from 0 to 100 milliseconds (ms) in 20 millisecond steps.
Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can specify the signal format as either PCM or DTS: If the beginnings of tracks from a PCM source are cut off, try the PCM setting. If noise is produced when fast forwarding or reversing a DTS CD, try the DTS setting.
Press the [RECEIVER] REMOTE MODE button.
Press and hold the AV receivers [DIGITAL INPUT] button for about 3 seconds.
While Auto is displayed (about 3 seconds), press the [DIGITAL INPUT] button repeatedly to select: PCM, DTS, or Auto. PCM: Only PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will ash and there will be no sound. DTS: Only DTS format input signals will be heard. If the input signal is not DTS, the DTS indicator will ash and there will be no sound. Auto (default): The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead.
Press and hold, for more than 4 seconds, the input selector button for the input source that you want to correct. This can be the [DVD], [VCR/DVR], [CBL/SAT], or [AUX] input source. Use the Left and Right [ ]/[ ] buttons to adjust the delay from 0 to 100 milliseconds in 20 millisecond steps.
Note: This setting is not available when the Direct listening mode is used with an analog input signal.
Controlling Other Components
You can use the AV receivers remote controller (RC-681M) to control your other AV components, including those made by other manufacturers. This section explains how to enter the necessary remote control code for the component that you want to control (e.g., DVD player, TV, or VCR).
Look up the appropriate remote control code in the separate Remote Control Codes list. The codes are organized by category (e.g., DVD player, TV, etc.). While holding down the REMOTE MODE button that you want to set, press the [DISPLAY] button for 3 seconds. The REMOTE MODE button lights up.
Entering Remote Control Codes
To control another component, you must rst enter the appropriate remote control code to a REMOTE MODE button. Youll need to enter a code for each component that you want to control.
Theres no picture Make sure that all video connecting plugs are pushed in all the way (page 23). Make sure that each video component is properly connected. The AV receiver does not convert between formats, so if a video source component is connected to a component video input, your TV must be connected to the component video output (page 24). If a video component is connected to an HDMI input, your TV must be connected to the HDMI OUT (page 28). On your TV, make sure that the video input to which the AV receiver is connected is selected. Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported (page 28).
Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesnt appear Relocate your antenna. Move the AV receiver away from your TV or computer. Listen to the station in mono (page 44). When listening to an AM station, operating the remote controller may cause noise. Passing cars and airplanes can cause interference. Concrete walls weaken radio signals. If nothing improves the reception, install an outdoor antenna.
The remote controller doesnt work Make sure that the batteries are installed with the correct polarity (page 12). Make sure that the remote controller is not too far away from the AV receiver, and that theres no obstruction between the remote controller and the AV receivers remote control sensor (page 12). Make sure youve selected the correct remote controller mode (page 13). Make sure youve entered the correct remote control code (page 63). Cant control other components Make sure youve selected the correct remote controller mode (page 13). If youve connected an -capable Onkyo MD recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks or CBL/SAT jacks, for the remote controller to work properly, you must set the Input Display to MD, CDR, or DOCK (page 41). The entered remote control code may not be correct. If more than one code is listed, try each one. With some AV components, certain buttons may not work as expected, and some may not work at all. To control an Onkyo component thats connected via , point the remote controller at the AV receiver. Be sure to enter the appropriate remote control code rst (page 63). To control an Onkyo component thats not connected via , or another manufacturers component, point the remote controller at the component. Be sure to enter the appropriate remote control code rst (page 63). Make sure the correct input is selected on your TV or the AV receiver. Some versions of the iPod do not output video. The AV receivers remote controller doesnt control your iPod 3rd generation iPods are not supported. Make sure your iPod is properly inserted in the RI Dock. If your iPod is in a case, it may not connect properly to the RI Dock. Always remove your iPod from the case before inserting it into the RI Dock. The iPod cannot be operated while its displaying the Apple logo. Make sure youve selected the right remote mode. Check the RI Docks RI MODE switch setting. When you use the AV receivers remote controller, point it toward your amp. The RI Dock must be connected to the AV receiver with both an cable and an audio cable. If you still cant control your iPod, start playback by pressing your iPods Play button. Remote operation should then be possible. Make sure the AV receivers remote controller is set to the correct remote control ID. The AV receiver unexpectedly selects your iPod as the input source Always pause iPod playback before selecting a different input source. If playback is not paused, the Direct Change function may select your iPod as the input source by mistake during the transition between tracks.
Home Entertainment 5.1-Channel Home Theater Package with iPod Dock
Affordable Home Theater Brimming with Versatility, Power and Capability
Theres absolutely no reason why affordability and versatility cant be dished up in the same high-definition-compatible home theater system.Thats what youre going to find with the HT-SP904. If youve made the investment in an LCD or plasma display, the HT-SP904 will be an excellent partner. It packs a challenging power capacity, 1080p pass-thru video via HDMI, XM and SIRIUS Satellite radio options, and iPod connectivity (courtesy of the included iPod dock)all in the same package.Youll be able to handle a multitude of video sources, which you can match to the resolution of your display. And when it comes to audio, you can select from computer-based sources, such as MP3s or your iPods content, as well as your entire CD collection.
HT -R557 5.1-Channel A/V Surround Home Theater Receiver
110 Watts per Channel Minimum into 8 Ohms, 1 kHz, 0.9%, 2 Channels Driven, FTC DTS, DTS 96/24, DTS Neo 6 5.1 Dolby Digital, Dolby Pro Logic II Decoding WRAT (Wide Range Amplifier Technology) Optimum Gain Volume Circuitry H.C.P.S. (High Current Power Supply) Massive High PowerTransformer 192 kHz/24-Bit DACs for All Channels 32-Bit Processing DSP Chip HDMI Pass-Thru (1080p Compatible; 2 Inputs and 1 Output)*1 HDTV-Capable (50 MHz) Component Video Switching (3 Inputs and 1 Output) 4 Digital Inputs (2 Optical, 2 Coaxial) 3 S-Video Inputs and 2 Outputs A-Form Listening Mode Memory Non-Scaling Configuration Late Night Mode CinemaFILTER Double Bass Function Tone Control (Bass/Treble) for Front L/R Channels Direct Mode Color-Coded 5.1-Multichannel Inputs (Receive 5.1 Surround Sound from Compatible Blu-ray Disc and HD-DVD Players) Color-Coded Speaker Terminals 40 FM/AM/XM/SIRIUS Radio Presets XM Satellite Radio Through XM Mini Tuner and Home Dock*2 XM 5.1 Surround Sound Processing Through Neural Surround*2 SIRIUS Satellite Radio Through SiriusConnect Home Tuner Kit*2 Audyssey 2EQ Technology to Correct Room Acoustic Problems and to Calibrate Speakers Crossover Adjustment (40/50/60/80/100/120/150/200 Hz) for Bass Management Compatible with the RI (Remote Interactive) Dock for the iPod A/V Synchronization Function (Up to 100 ms in 20 ms Steps) Headphone Jack (1/4) Preprogrammed RI (Remote Interactive) Remote Control
*1A separate audio connection is necessary to process multichannel audio. *2XM requires separate purchase of XM Mini Tuner and Home Dock. SIRIUS requires separate purchase of subscription, compatible tuner antenna.
DV-SP405 HD Conversion DVD/CD/MP3 Player
Plays DVD Video,Video CD, DualDisc (Not DVD Audio), Audio CD, CD-R/RW, DVD-R/RW, DVD+R/RW* Plays MP3,WMA,WMV, MPEG-4 AAC, DivX and JPEG Formats* HDMI 1.0 Digital Interface HD Conversion to Match Resolution of High-Definition Displays Component, S-Video and Composite Video Outputs 96 kHz/24-Bit Audio DAC 108 MHz/12-Bit Video DAC Progressive Scan Video Output Disc Navigator for Browsing Video and Audio Content (Including Computer-Based Files)
*Discs that have not been properly finalized may only be partially playable or not playable at all.
DS-A1X Remote Interactive Dock for the iPod
Recharges iPod When Connected to AC Power Supply Superior Quality for Digital Music Files Simultaneous Playback of Slideshow and Songs Remote Control of iPod Auto Power On Auto Selector Function Time Play/Sleep Timer Function Alarm Function
HTP-650 5.1-Channel Home Theater Speaker System
SKF-750F 2-Way Front Speakers
3 1/8 (8 cm) Cone Woofer x (2.5 cm) Balanced-Dome Tweeter Frequency Response: 60 Hz50 kHz Magnetically Shielded 3 1/8 (8 cm) Cone Woofer x (2.5 cm) Balanced-Dome Tweeter Frequency Response: 60 Hz50 kHz Magnetically Shielded 3 1/8 (8 cm) Cone Woofer 1 (2.5 cm) Balanced-Dome Tweeter Frequency Response: 60 Hz50 kHz Magnetically Shielded
AUDIO AND VIDEO FEATURES
DTS 2.0+Digital Out and Dolby Digital Coaxial Digital Output Last Play Memory (DVD/CD) and Resume Function Program Memory and Playback (DVD/CD) Fast Forward and Reverse (4 Speeds) for DVD Video, Audio CD and Digital Audio-Encoded Files Slow Motion DVD Playback (1/2, 1/4, 1/8 or 1/16 Speed) A-B Repeat (Looping) and Standard Repeat Play for DVD Video and Audio CDs Random Play for DVD Video and Audio CDs Subtitle and Language Switching Zoom Function (2x, 4x) for Video and Picture Files Multi-Aspect Ratio (16:9, 4:3) Multi-Camera Angle Dynamic Range Control (High, Medium, Low, Off) Virtual Surround Equalizer (Rock, Pop, Live, Dance,Techno, Classic, Soft) Dialog Setting (High, Medium, Low)
SKC-750C 2-Way Center Speaker
SKM-750S 2-Way Surround Speakers
Note: All speakers feature an impedance of 8 ohms, a maximum input power rating of 110 W, color-coded speaker terminals and speaker cable.
SKW-750 Bass Reflex Powered Subwoofer
Built-in 230 W Amplifier Auto-Standby/On Circuitry Output Level Control 10 (25 cm) Cone Woofer Line Level Input Frequency Response: 25 Hz150 Hz
On-Screen Display (English, French, Spanish, German, Italian, Russian) Aluminum Front Panel Parental Lock Front Panel Control Cursor Full-Function Remote Control
Component Video Frequency Response 5 Hz50 MHz (-3 dB)
HDMI Pass-Thru* for the Leading Hi-Def Displays and Media
With its HDMI connectivity, the HT-SP904 is the ideal complement to high-definition displays and media.The HT-SP904 will effortlessly transport and enable the full potential of Blu-ray Disc, HD DVD, DVD, HD broadcasts and gaming.The packages 1080p pass-thru capability is perfect for getting the highest possible video resolution from PlayStation 3 and dedicated Blu-ray Disc and HD DVD players.
*A separate audio connection is necessary to process multichannel audio.
Tuning Frequency Range FM 87.5 MHz107.9 MHz AM 530 kHz1,710 kHz FM/AM/XM/SIRIUS Preset Memory 40 stations
Power Consumption 8W Standby Power Consumption 0.9 W Dimensions (W x H x D) 17 1/8 x 2 3/8 x 8 1/2 (435 x 61 x 215.5 mm) Weight 4.2 lbs. (1.9 kg)
s SPEAKER SECTION
Speaker Type Front/Center/Surround 2-way acoustic suspension Subwoofer Bass reflex powered Drivers Front/Center 3 1/8 (8 cm) cone woofer x (2.5 cm) balanced-dome tweeter Surround 3 1/8 (8 cm) cone woofer 1 (2.5 cm) balanced-dome tweeter Subwoofer 10 (25 cm) cone Frequency Response Front/Center/Surround 60 Hz50 kHz Subwoofer 25 Hz150 Hz Output Sound Pressure Level Front/Center 79 dB/W/m Surround 76 dB/W/m Max. Input Power Front/Center/Surround 110 W Max. Output Power Subwoofer 230 W Nominal Impedance Front/Center/Surround 8 ohms Input Sensitivity/Impedance Subwoofer 140 mV/20 k-ohms
Power Supply AC 120 V, 60 Hz Power Consumption 4.5 A Dimensions (W x H x D) 17 1/8 x 5 7/8 x 14 13/16 (435 x 150 x 377 mm) Weight 22.5 lbs. (10.2 kg)
Audyssey 2EQ for Optimal Loudspeaker Response
Audyssey 2EQ works by combining speaker calibration with room correction to deliver optimally tuned sound for the HT-SP904. First, the speakers are pre-calibrated to optimize the speaker system. Then the technology performs room correction to remove distortion, thereby creating the perfect match between the speakers and your room.The end result is an ideal loudspeaker response that ensures your movies and music sound exactly as they should.
HD CONVERSION DVD/CD/MP3 PLAYER VIDEO SECTION
Signal System NTSC Composite Video Output/Impedance 1 Vp-p/75 ohms negative sync S-Video Output/Impedance Y: 1 Vp-p/75 ohms negative sync 4-pin mini DIN C: 0.286 Vp-p/75 ohms Component Video Output/Impedance Y: 1 Vp-p/75 ohms PB/PR: 0.7 Vp-p/75 ohms Component Video Frequency Response 5 Hz13 MHz HDMI 19-pin connector
XM Satellite Radio with XM HD Surround and SIRIUS Satellite Radio Programming*
The HT-SP904 enables access to both XM and SIRIUS Satellite Radio. Also, the receivers onboard Neural Surround decoder enables up to 5.1 channels of surround-sound radio, including freeform music channels, as well as a variety of special shows and live music performances from XM Live (Channel 200). SIRIUS brings access to over 130 digital-quality channels, including 69 channels of 100% commercial-free music, plus exclusive channels of sports, news, talk, entertainment, traffic, weather and data.
*XM requires separate purchase of XM Mini Tuner and Home Dock. SIRIUS requires separate purchase of subscription, compatible tuner and antenna.
Dimensions (W x H x D) Front Center Surround Subwoofer Weight Front Center Surround Subwoofer 5 1/2 x 14 x 3 11/16 (140 x 355 x 93 mm) 14 x 5 1/2 x 3 11/16 (355 x 140 x 93 mm) 5 1/2 x 14 x 3 11/16 (140 x 355 x 93 mm) 10 13/16 x 19 15/16 x 16 3/16 (275 x 507 x 411 mm) 4.0 lbs. (1.8 kg) 4.0 lbs. (1.8 kg) 2.9 lbs. (1.3 kg) 24.7 lbs. (11.2 kg)
Frequency Response DVD Linear Sound 4 Hz44 kHz (96 kHz) 4 Hz22 kHz (48 kHz) Audio CD 4 Hz20 kHz (44.1 kHz) S/N Ratio 115 dB Audio Dynamic Range 88 dB THD (Total Harmonic Distortion) 0.0065% (1 kHz) Wow and Flutter Below threshold of measurability Audio Output/Impedance Coaxial 0.5 Vp-p/75 ohms Analog 2 V (rms)/440 ohms
Dimensions (W x H x D) Weight 22 3/8 x 38 1/16 x 20 1/4 (569 x 966 x 514 mm) 82.7 lbs. (37.5 kg)
Power Supply AC 120 V, 60 Hz
s UPC CODE
s RECEIVER SECTION
110 W + 110 W (8 ohms, 1 kHz, 0.9%, 2 channels driven, FTC) Center 110 W (8 ohms, 1 kHz, 0.9%, 2 channels driven, FTC) Surround L/R 110 W + 110 W (8 ohms, 1 kHz, 0.9%, 2 channels driven, FTC) Dynamic Power 210 W (3 ohms, 1 ch) 190 W (4 ohms, 1 ch) 130 W (8 ohms, 1 ch) THD (Total Harmonic Distortion) 0.08% Damping Factor 60 (Front, 1 kHz, 8 ohms) Input Sensitivity and Impedance 200 mV/47 k-ohms (Line) Output Level and Impedance 200 mV/2.2 k-ohms (Rec out) Frequency Response 5 Hz100 kHz/+1 dB, -3 dB (Direct mode) Tone Control 10 dB, 50 Hz (Bass) 10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 100 dB (Line, IHF-A) Speaker Impedance 8 ohms16 ohms Power Output Front L/R
Input Sensitivity/Output Level and Impedance Video 1 Vp-p/75 ohms (Component and S-Video Y) 0.7 Vp-p/75 ohms (Component PB/CB,PR/CR) 0.28 Vp-p/75 ohms (S-Video C) 1 Vp-p/75 ohms (Composite)
Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. DTS is a registered trademark and the DTS logos and Symbol are trademarks of DTS, Inc. Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. 2EQ is a trademark of Audyssey Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. The XM name and related logos are registered trademarks of XM Satellite Radio Inc. Hardware and monthly service subscription sold separately. SIRIUS and the SIRIUS dog logo are registered trademarks of SIRIUS Satellite Radio Inc. The Neural Surround name and related logos are trademarks owned by Neural Audio Corporation. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. DivX, DivX Certified and associated logos are trademarks of DivX Networks, Inc. and are used under license. CinemaFILTER and Theater Dimensional are trademarks of Onkyo Corporation. All other trademarks and registered trademarks are the property of their respective holders. Onkyo Corporation 2-1 Nisshin-cho, Neyagawa-shi, Osaka 572-8540, JAPAN Tel: +81-72-831-8136 Fax: +81-72-833-5222 http://www.onkyo.com/ Onkyo U.S.A. Corporation 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: +1-201-785-2600 Fax: +1-201-785-2650 http://www.onkyousa.com/ Mexico: Sole Distributor, Representaciones de Audio, S.A. de C.V. Calle 10 No. 133 Col. Granjas San Antonio Del. Iztapalapa C.P. 09070 Mexico, D.F. MEXICO
1490LMT CQ-DFX501N Steam PM-D770 EHS60210P DV4400 GPS 15L RU-27FB31C Server DMC-FX5 Resurrection L1953HM-SF VH242 KRC-859R NC6220 H4D-60 Elura 20MC KX-FLM551 VR140 58 TC-WE805S G4010 Receiver EH-TW3000 CDX-MP30X CDX-GT460U SL1000 LFA-PC2 Dect5211S Cavalier 1998 MC2660E-M M2094D-PZ JD-S10CL MX-200 XSA-01010B RDR-HX727 M-560V RHT-G550 WV-CS854A DSR-400K UX-B800 UF-7000 CDX-CA530X MX46LSV Esam 2600 CLP-315W XAA RE601 Audio 310 CT2700 SRF-M80V Dictionary SX-303RDS KDL-40S4100 Cabriolet Estate ZMZ28 VGN-AR41E WD9541 KDC-MP428 328 GTB SA-6500II 125-135 KDL-32NX503 Malibu 2005 CDX-C5000RV KV-25DA65 CE 2000 MD 7455 Logan VAN Nikkor Sysmac CJ Multipath TD-8840T CHC-CL5MD WK-1350 CDM120 Cooker ROC 240 Force GP DV-W28s-V QG3150 30 Gzmg77US-GZ-mg77 42LY3RF SU-800 DSC-H7-B DV352 82 IS Sights PEG-TG50 60 CS SE 145 Simdriveline 1 TH-D5 UE40C6740 GO 550 KX-TG8321E Vi 1355 1040 XA1200-2000 F1003W Voyager 520 CDX-F5550
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101