Reviews & Opinions
Independent and trusted. Read before buy Onkyo TX-SR604E!

Onkyo TX-SR604E

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Onkyo TX-SR604e Home Cinema Amplifier, size: 3.7 MB
Related manuals
Onkyo TX-SR604e Using Sirius
Onkyo TX-SR604e Remote Control Codes

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Onkyo TX-SR604EAbout Onkyo TX-SR604E
Here you can find all about Onkyo TX-SR604E like manual and other informations. For example: review.

Onkyo TX-SR604E manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Onkyo TX-SR604E please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Onkyo TX-SR604E photo ]

Video review

My setup/HTPC... updated

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
niqqie 5:01am on Friday, August 20th, 2010 
Excellent quality receiver at a reasonable price I purchased this receiver to pair with Polk 6750 5.1 Surround Speakers. Excellent DVD Changer, upconvert is crisp and bright The only reason I did not give this product a five is because i did not like the remote.
alexatoo 8:39pm on Thursday, May 13th, 2010 
I bought this receiver for my Samsung 56" DLP...  Good receiver easy auto setup.
mschulke 8:28am on Tuesday, May 4th, 2010 
Onkyo TX-SR604 Awesome. Worth much more than I paid. Delivers great 5.1 sound (next step is to get two more speakers so I can go 7.1). Excellent quality receiver at a reasonable price I purchased this receiver to pair with Polk 6750 5.1 Surround Speakers.
Samweis 6:50am on Thursday, April 22nd, 2010 
I replaced an old Sony DE-435 5x100w. The fi...  features & inputs not loud & clear for music

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Contents

Introduction..2

AV Receiver
TX-SR604/604E TX-SR8460 TX-SR674/674E TX-SR8467

Instruction Manual

Connections..18

First Time Setup..38

Basic Operations..49

Advanced Operations..66

Advanced Setup..67

Zone 2..79

Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. Please retain this manual for future reference.
Controlling Other Components.83

Specications..86

Troubleshooting..87

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions
1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specied by the manufacturer. Use only with the cart, stand, PORTABLE CART WARNING tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. S3125A Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Damage Requiring Service Unplug the apparatus from the wall outlet and refer servicing to qualied service personnel under the following conditions: A. When the power-supply cord or plug is damaged, B. If liquid has been spilled, or objects have fallen into the apparatus, C. If the apparatus has been exposed to rain or water, D. If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualied technician to restore the apparatus to its normal operation, E. If the apparatus has been dropped or damaged in any way, and F. When the apparatus exhibits a distinct change in performance this indicates a need for service. 16. Object and Liquid Entry Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a re or electric shock. The apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases shall be placed on the apparatus. Dont put candles or other burning objects on top of this unit. 17. Batteries Always consider the environmental issues and follow local regulations when disposing of batteries. 18. If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation. Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a ue-like gap for warm air to escape.

VOLTAGE SELECTOR

For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

220-240V

Pressing the [STANDBY/ON] button to select Standby mode does not fully shutdown the unit. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet. 5. Never Touch this Unit with Wet HandsNever handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. 6. Handling Notes If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it. Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case. This units top and rear panels may get warm after prolonged use. This is normal.

Modle pour les Canadien

REMARQUE: CET APPAREIL NUMRIQUE DE
LA CLASSE B EST CONFORME LA NORME NMB-003 DU CANADA. Sur les modles dont la che est polarise: ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND.
PrecautionsContinued For British models
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualied service personnel.

Supplied Accessories

Make sure you have the following accessories:

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
Remote controller & two batteries (AA/R6)

Speaker setup microphone

Indoor FM antenna
The plug is tted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cords plug is not suitable for your socket outlets, cut it off and t a suitable plug. Fit a suitable fuse in the plug.

AM loop antenna

Surround Back Right Surround Back Right Zone 2 Right Zone 2 Right Surround Back Right Surround Back Right Zone 2 Right Zone 2 Right Surround Back Left Surround Back Left Zone 2 Left Zone 2 Left Surround Back Left Surround Back Left Zone 2 Left Zone 2 Left Front Right Front Right SP-B / Zone 2 Right SP-B / Zone 2 Right Front Left Front Left SP-B / Zone 2 Left SP-B / Zone 2 Left Surround Left Surround Left Surround Right Surround Right Center Center Center Center
Front Left Front Left SP-B / Zone 2 Left SP-B / Zone 2 Left
Front Right Front Right SP-B / Zone 2 Right SP-B / Zone 2 Right

Speaker Cable

Speaker cable labels

For European Models

Declaration of Conformity
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3. GROEBENZELL, GERMANY

K. MIYAGI

Surround Left Surround Left
Surround Right Surround Right
Power-plug adapter Only supplied in certain countries. Use this adapter if your AC outlet does not match with the plug on the AV receivers power cord (adapter varies from country to country). *How to mount the AC plug:
ONKYO EUROPE ELECTRONICS GmbH
* In catalogs and on packaging, the letter at the end of the product name indicates the color. Specications and operations are the same regardless of color.

Features

Amplier
7-channel amplier Optimum Gain Volume Circuitry Zone 2 capability 24-bit/192 kHz D/A converters WRAT (Wide Range Amplier Technology) Color-coded speaker terminal posts
TX-SR674/674E and TX-SR8467 Only
95 watts per channel into 8 ohms, 20 Hz to 20 kHz, less than 0.08% total harmonic distortion (FTC rating) VLSC*8 (Vector Linear Shaping Circuitry) all channels HDMI up-conversion from composite video, SVideo, and component video

Audio/Video

Dolby*1 Digital, Dolby Digital EX, Dolby Pro Logic IIx DTS*2, DTS-ES Discrete, DTS-ES Matrix, DTS Neo:6, and DTS 96/24 Pure Audio listening mode (not North American models) Neural Surround*3 (North American models only) 6 digital inputs (4 optical, 2 coaxial), 1 digital optical output Zone 2 line out 2 HDMI*4 inputs, 1 output (Version 1.1) Composite and S-Video to component video conversion Composite video to S-Video and S-Video to composite video conversion 3 component video inputs, 1 output 5 S-Video inputs, 3 outputs CinemaFILTER*5 Subwoofer pre out

G RETURN button

This button is used to return to the previously displayed onscreen setup menu.
Front & Rear PanelsContinued
H Arrow/TUNING/PRESET & ENTER buttons
When the AM or FM input source is selected, the TUNING [ ] [ ] buttons are used to tune the tuner, and the PRESET [ ] [ ] buttons are used to select radio presets (see page 53). When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The [ENTER] button is also used with the onscreen setup menus. The OFF button is used to turn off the output of Zone 2.

W PHONES jack (51)

This 1/4-inch phone jack is for connecting a standard pair of stereo headphones for private listening.
X PURE AUDIO button and indicator (61)
The North American models do not have this button and indicator. Selects the Pure Audio listening mode. The indicator lights up when this mode is selected.

I SETUP button

This button is used to access the onscreen setup menus that appear on the connected TV.
J MASTER VOLUME control (49)
This control is used to adjust the volume of the AV receiver to MIN, 1 through 99, or MAX.

K VIDEO 4 INPUT

This input can be used to connect a camcorder, game console, and so on. There are jacks for optical digital audio, S-Video, composite video, and analog audio.

L SETUP MIC (38)

The included speaker setup microphone is connected here for automatic speaker setup.
M TUNING MODE button (52)
This button is used to select the Auto or Manual tuning mode.

N MEMORY button (53)

This button is used when storing or deleting radio presets.
O DIMMER or RT/PTY/TP button (51, 55)
DIMMER is used to adjust the display brightness. On the European model, this is the RT/PTY/TP button, and its for RDS (Radio Data System). See Using RDS (European models only) on page 54.
P DIGITAL INPUT button (44, 77)
This button is used to assign the digital inputs and to specify the format of digital input signals.

Q DISPLAY button (50)

Multichannel analog audio cable (RCA)
Note: The AV receiver does not support SCART plugs.
Connecting the AV ReceiverContinued

Connecting Your Speakers

Speaker Conguration
For the best surround sound experience, you should connect seven speakers and a powered subwoofer. The following table indicates the channels you should use depending on the number of speakers that you have.
Number of speakers: Front left Front right Center Surround left Surround right Surround back Surround back left* Surround back right* 2 3 4 5 6 7

LINE INPUT

PRE OUT

SUB WOOFER

Connecting a Powered Subwoofer
Using a suitable cable, connect the AV receivers PRE OUT SUBWOOFER to an input on your powered subwoofer, as shown. If your subwoofer is unpowered and youre using an external amplier, connect the PRE OUT SUBWOOFER to an input on the amp.

Powered subwoofer

*If youre using only one surround back speaker, connect it to the left (L) SURROUND BACK SPEAKERS terminals.
No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass. To get the best from your surround sound system, you need to set the speaker settings by using the supplied setup microphone (see page 38).
Attaching the Speaker Labels
The AV receivers positive (+) speaker terminals are color-coded for ease of identication (the negative () speaker terminals are all black).
Speaker terminal Front left, Zone 2 left Front right, Zone 2 right Center Surround left Surround right Surround back left Surround back right Color White Red Green Blue Gray Brown Tan

Using Dipole Speakers

You can use dipole speakers for the surround left and right and surround back left and right speakers. Dipole speakers output the same sound in two directions. Dipole speakers typically have an arrow printed on them to indicate how they should be positioned. The surround left and right dipole speakers should be positioned so that their arrows point toward the TV/screen, while the surround back left and right dipole speakers should be positioned so that their arrows point toward each other, as shown.

Dipole speakers

TV/screen
The supplied speaker labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the above table. Then all you need to do is to match the color of each label to the corresponding speaker terminal.

Normal speakers

1. Subwoofer 2. Front left speaker 3. Center speaker 4. Front right speaker 5. Surround left speaker
6. Surround right speaker 7. Surround back left speaker 8. Surround back right speaker
Speaker Connection Precautions
Read the following before connecting your speakers: North American models: Only connect speakers with an impedance of 6 ohms or higher. If you use speakers with a lower impedance, and use the amplier at high volume levels for a long period of time, the built-in protection circuit may be activated. Other models: You can connect speakers with an impedance of between 4 and 16 ohms. If the impedance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, be sure to set the minimum speaker impedance to 4 ohms (see page 47). If you use speakers with a lower impedance, and use the amplier at high volume levels for a long period of time, the built-in protection circuit may be activated. Disconnect the power cord from the wall outlet before making any connections. Read the instructions supplied with your speakers. Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negative () terminals only to negative () terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural. Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided. If you use 4 or 5 speakers, connect each of the two surround speakers to the SURROUND SPEAKERS terminals. Do not connect them to the SURROUND BACK SPEAKERS terminals. Be careful not to short the positive and negative wires. Doing so may damage the AV receiver. Make sure the metal core of the wire does not have contact with the AV receivers rear panel. Doing so may damage the AV receiver. Dont connect more than one cable to each speaker terminal. Doing so may damage the AV receiver. Dont connect one speaker to several terminals.

IN1: Select if the video component is connected to HDMI IN 1. IN2: Select if the video component is connected to HDMI IN 2. ---: Output composite video, S-Video, and component video sources from the HDMI OUT. The video output signal from the HDMI OUT is the one congured in Component Video Setup (page 46).
Use the Up and Down [ ]/[ ] buttons to select 0. Video Input, and then press [ENTER]. The Video Input menu appears.
Press the [SETUP] button. Setup closes.
Use the Up and Down [ ]/[ ] buttons to select an input selector, and use the Left and Right [ ]/[ ] buttons to select: (TX-SR604/604E/8460 only)
IN1: Select if the video component is connected to HDMI IN 1. IN2: Select if the video component is connected to HDMI IN 2. No: Select when not using the HDMI output.

2, 3 1, 4

Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD player to COMPONENT IN 3, you should assign it to the DVD input selector. If you want to output composite and S-Video sources from the COMPONENT VIDEO OUT, select ---, as explained below.
Input selector DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO IN jack IN 1 -------
Use the Up and Down [ ]/[ ] buttons to select an input selector, and then use the Left and Right [ ]/[ ] buttons to select: IN1: Use the video component connected to COMPONENT VIDEO IN 1. IN2: Use the video component connected to COMPONENT VIDEO IN 2. IN3: Use the video component connected to COMPONENT VIDEO IN 3. ---: Output composite video and S-Video sources from the COMPONENT VIDEO OUT. Press the [SETUP] button. The setup menu closes.

VIDEO 4 is xed to ---.

Notes: (TX-SR674/674E/8467 only) When the input selector assignment for the COMPONENT VIDEO IN jacks is set to IN1, IN2 or IN3, the composite video to SVideo and S-Video to composite video conversions will not work. This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
Changing the Input Display
If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or next generation HDD-compatible component to the TAPE IN/OUT or VIDEO 3 IN jacks, for to work properly, you must change this setting. This setting can only be changed on the AV receiver.
Minimum Speaker Impedance (not North American models)
If you change this setting, you must run the automatic speaker setup again (see page 38). If the impedance of any speaker is 4 ohms or more but less than 6, set the minimum speaker impedance to 4 ohms. Note: Before you change this setting, turn down the volume.

PLIIx Game

This mode is for use with DTS-ES Discrete soundtracks, which use a discrete surround back channel for true 6.1/7.1-channel playback. The seven totally separate audio channels provide better spatial imaging and 360-degree sound localization, perfect for sounds that pan across the surround channels. Use it with DVDs that bear the DTS-ES logo, especially those with a DTS-ES Discrete soundtrack.
Use this mode with video games, especially those that bear the Dolby Pro Logic II logo.

DTS-ES Matrix

Onkyo Original DSP Modes

Mono Movie

This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-encoded back-channel for 6.1/7.1-channel playback. Use it with DVDs that bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack.

DTS Neo:6

This mode is suitable for old movies and other mono sources. The center speaker outputs the sound as it is, while reverb is applied to the sound output by the other speakers, giving presence to even mono material.

Orchestra

This mode expands any 2-channel source for 6.1-channel playback. It uses six full-bandwidth channels of matrix decoding for matrix-encoded material, providing a very natural and seamless surround sound experience that fully envelops the listener.

Neo:6 Cinema

Suitable for classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberation of a large hall.

Unplugged

Use this mode with any stereo movie (e.g., TV, DVD, VHS).

Neo:6 Music

Suitable for acoustic instruments, vocals, and jazz, this mode emphasizes the front stereo image, giving the impression of being right in front of the stage.

Studio-Mix

Use this mode with any stereo music source (e.g., CD, radio, cassette, TV, VHS, DVD).
Dolby Digital + Neo:6 DTS+Neo:6
This mode uses Neo:6 to expand 5.1-channel Dolby Digital and DTS sources for 6.1/7.1-channel playback. Use it with DVDs that bear the Dolby Digital or DTS logo and feature a 5.1-channel soundtrack.

Use the Up and Down [ ]/[ ] buttons to select 4. Equalizer Settings, and then press [ENTER]. The Equalizer Settings menu appears.
Use the Left and Right [ ]/[ ] buttons to select: Off: Tone off, response at. Audyssey: The tone for each speaker is set automatically by the Automatic Speaker Setup function.
Notes: When the listening mode is set to Direct or Pure Audio, no effect will be produced. This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
Multichannel DVD Input Settings Audio Adjust Functions
Here you can set listening mode-related settings and functions.
Use the Up and Down [ ]/[ ] buttons to select 8. Hardware Setup, and then press [ENTER]. Use the Up and Down [ ]/[ ] buttons to select SW Input Sensitivity, and use the Left and Right [ ]/[ ] buttons to select a value.
Use the Up and Down [ ]/[ ] buttons to select 5. Audio Adjust, and then press [ENTER]. The Audio Adjust menu appears.

SW Input Sensitivity

Some DVD players output the LFE channel from their subwoofer output at 15 dB higher than normal. You can change the subwoofer sensitivity to match your DVD player. Note that this setting only affects signals connected to the SUBWOOFER input jack of the multichannel DVD input. You can select 0 dB, 5 dB, 10 dB, or 15 dB. If you nd that your subwoofer is too loud, try the 10 dB or 15 dB setting.
Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right [ ]/ [ ] buttons to set them. The settings are explained on page 73.
When youve nished, press the [SETUP] button. The setup menu closes.
The Audio Adjust functions are explained below.

Neo:6 Music Mode Setting

I Center Image The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel (stereo) sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel. It can be adjusted from 0 to 5 (default is 2). This setting is unavailable if no surround speakers are connected. When set to 0, the front left and right channel output is attenuated by half (6 dB), giving the impression that the sound is located centrally. This setting works well when the listening position is considerably off center. When set to 5, the front left and right channels are not attenuated, maintaining the original stereo balance.

Input Channel Settings

I Multiplex This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output (default). Sub: The sub channel is output. Main/Sub: Both the main and sub channels are output. I Mono Input Ch This setting species the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2channel analog/PCM source in the Mono listening mode. L+R: Both the left and right channels are output (default). Left: Only the left channel is output. Right: Only the right channel is output.

Dolby Digital EX Input Signal Setting
I Dolby EX This setting determines how Dolby Digital EX signals are handled. This setting is unavailable if no surround back speakers are connected. Auto: If the source signal contains a Dolby Digital EX ag, the Dolby Digital EX listening mode is used (default). Manual: You can select Pro Logic IIx Movie, Pro Logic IIx Music, Dolby Digital, Dolby Digital EX, or Dolby Digital+Neo:6.
PL IIx Music Mode Settings
These settings provide for playing any 2-channel digital source such as Dolby Digital, or 2-channel analog/PCM source in the PLIIx Music listening mode. I Panorama With this function, you can broaden the width of the front stereo image when using the Pro Logic II Music or Pro Logic IIx Music listening mode. On: Panorama function on. Off: Panorama function off (default). I Dimension With this setting, you can move the sound eld forward or backward when using the Pro Logic II Music or Pro Logic IIx Music listening mode. It can be adjusted from 3 to +3 (default is 0). Lower settings move the sound eld forward. Higher settings move it backward. If the stereo image feels too wide, or there is too much surround sound, move the sound eld forward to improve the balance. Conversely, if the stereo image feels like it is in mono, or there is not enough surround sound, move it backward. I Center Width With this function, you can adjust the width of the sound from the center speaker when using the Pro Logic II Music or Pro Logic IIx Music listening mode. Normally if you are using a center speaker, the center channel sound is output by only the center speaker. (If you are not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center.) This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. It can be adjusted from 0 to 7 (default is 3).

T-D Listening Setting

I Listening Angle With this setting, you can specify the angle of the front left and right speakers relative to the listening position. Processing for the Theater-Dimensional listening mode is based on this setting. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings.
Front left speaker Front right speaker
Narrow: Select if the listening angle is 20 degrees. Wide: Select if the listening angle is 40 degrees (default).
Assigning Listening Modes to Input Sources

You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes during playback, but the mode specied here will be resumed once the AV receiver has been set to Standby. The Last Valid option means that the listening mode selected last will be used. b. Ana/PCM: With this setting, you can specify the listening mode to be used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc.) or PCM digital (CD, DVD, etc.) audio signal is played. c. Dolby D: With this setting, you can specify the listening mode to be used when a Dolby Digital format digital audio signal is played (DVD, etc.). d. DTS: With this setting, you can specify the listening mode to be used when a DTS format digital audio signal is played (DVD, LD, CD, etc.). e. D.F. 2ch: With this setting, you can specify the listening mode to be used when a 2-channel (2/0) digital audio signal (Dolby Digital, DTS) is played (DVD, etc.). f. Mono: With this setting, you can specify the listening mode to be used when a mono digital audio signal is played (DVD, etc.). g. MCH Ana: This setting is available only when DVD or MULTI CH is selected with INPUT SELECTOR. With this setting, you can specify the listening mode to be used when the DVD analog multichannel input is used. h. MCH PCM*: Species the default listening mode for multichannel PCM sources input via a HDMI IN, such as DVD-Audio. i. PCM192k*: Species the default listening mode for high resolution 176.4 kHz and 192 kHz digital audio sources such as DVD-Audio. *Only for inputs the HDMI IN jack is assigned to
Use the Up and Down [ ]/[ ] buttons to select 6. Input Setup, and then press [ENTER]. The Input Setup menu appears.
Use the INPUT SELECTOR buttons on the remote controller to select the input source that you want to set. For input selectors that have no digital input jacks, only b. Analog will be available.
Use the Up and Down [ ]/[ ] buttons to select the signal format that you want to set, and then use the Left and Right [ ]/ [ ] buttons to select a listening mode. Only listening modes that can be used with each input signal format can be selected.

IntelliVolume

You can set the input level for each input source. This is useful if some of your AV components are louder or quieter than others. IntelliVolume does not affect Zone 2. While this menu is shown onscreen, you can select each input source and set the levels while listening to and comparing them.

Volume Setup/OSD Setup

This section explains the items on the Miscellaneous Setup menu.
Use the Up and Down [ ]/[ ] buttons to select 7. Miscellaneous Setup, and then press [ENTER]. The Miscellaneous Setup menu appears.
Use the INPUT SELECTOR buttons on the remote controller to select the input source that you want to set.
Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right [ ]/ [ ] buttons to set them. The settings are explained on page 76.
Use the Up and Down [ ]/[ ] buttons to select a. IntelliVolume. If a component is too loud compared to your other components, use the Left [ ] button to adjust the level. If its too quiet, use the Right [ ] button. The level can be set from 12 dB to +12 dB.

Maximum Volume

With this preference, you can prevent the volume being set too high by specifying a maximum volume level. The range is from 50 to 99. To specify no maximum volume, select Off.

Power On Volume

HDMI Audio Out
With this preference, you can specify the volume setting to be used each time the AV receiver is turned on. The range is MIN, 1 - 99, MAX. To use the same volume level that was used when the AV receiver was turned off, select Last. The Power On Volume cannot be set higher than the Maximum Volume setting.

Immediate Display

Use the Up and Down [ ]/[ ] buttons to select 8. Hardware Setup, and then press [ENTER]. Use the Up and Down [ ]/[ ] buttons to select HDMI Audio Out, and use the Left and Right [ ]/[ ] buttons to select On or Off.
This preference determines whether or not actions, such as selecting an input source, are displayed onscreen. Normal: Select if your TV is 4:3. Wide: Select if your TV is 16:9. Off: Actions not displayed. Even if this preference is set to Normal or Wide, actions are not displayed on the TV or projector while outputting the signals received at COMPONENT VIDEO IN or HDMI IN.
Changing the AV Receivers ID
This preference determines whether audio received at the HDMI IN is output by the HDMI OUT. You may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio from a component thats connected to an HDMI IN, through your TVs speakers. Normally, this should be set to Off. Off: HDMI audio is not output (default). On: HDMI audio is output. With some TVs and input signals, no sound may be output even when this setting is set to On.

VIDEO 1

Note that resetting the AV receiver will delete your radio presets and custom settings.
Cant turn on the AV receiver Make sure that the power cord is properly plugged into the wall outlet. Unplug the power cord from the wall outlet, wait ve seconds or more, then plug it in again. The AV receiver turns off as soon as its turned on The amp protection circuit has been activated. Remove the power cord from the wall outlet immediately and contact your Onkyo dealer.
While a pair of headphones is connected to the PHONES jack, no sound is output by the speakers (page 51). If theres no sound from a DVD player connected to an HDMI IN, check the DVD players output settings, and be sure to select a supported audio format. Check the digital audio output setting on the connected device. On some game consoles, such as those that support DVD, the default setting is off. With some DVD-Video discs, you need to select an audio output format from a menu. If your turntable doesnt have a built-in phono preamp, you must connect one between it and the AV receiver. If your turntable uses an MC cartridge, you must connect an MC head amp, or an MC transformer and phono equalizer. Make sure that none of the connecting cables are bent, twisted, or damaged. Not all listening modes use all speakers (page 63). Specify the speaker distances (page 69) and adjust the individual speaker levels (page 70). Make sure that the speaker setup microphone is not still connected. The input signal format is set to PCM or DTS. Set it to Auto (page 77). Only the center speaker produces sound If you use the Pro Logic IIx Movie, Pro Logic IIx Music, or Pro Logic IIx Game listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker. Make sure the speakers are congured correctly (page 67). The surround speakers produce no sound When the Stereo or Mono listening mode is selected, the surround speakers produce no sound (page 63). Depending on the source and current listening mode, not much sound may be produced by the surround speakers. Try selecting another listening mode. Make sure the speakers are congured correctly (page 67). The center speaker produces no sound When the Mono or Stereo listening mode is selected, the center speaker produces no sound (page 63). Make sure the speakers are congured correctly (page 67).
Theres no sound, or its very quiet Make sure that the digital input source is selected properly (page 44). Press the [DIGITAL INPUT] button repeatedly. Make sure that all audio connecting plugs are pushed in all the way (page 18). Make sure that the inputs and outputs of all components are connected properly (page 18). Make sure that the polarity of the speaker cables is correct, and that the bare wires are in contact with the metal part of each speaker terminal (page 20). Make sure that the input source is properly selected (page 49). Make sure that the speaker cables are not shorting. Check the volume. It can be set to MIN, 1 through 99, or MAX (page 49). The AV receiver is designed for home theater enjoyment. It has a wide volume range, allowing precise adjustment. If the MUTING indicator is shown on the display, press the remote controllers [MUTING] button to unmute the AV receiver (page 51).

You must use the buttons on the unit to make these settings. 1. While holding down the input selector button for the input source that you want to set, press the [SETUP] button. 2. Use the Left and Right [ ]/[ ] buttons to change the setting. 3. Press the [SETUP] button when youve nished. Video Attenuation This setting can be made for the DVD, VIDEO 1, VIDEO 2, VIDEO 3, or VIDEO 4 input. If you have a games console connected to the component video, S-Video, or composite video input, and the picture isnt very clear, you can attenuate the gain. Video ATT:0: (default). Video ATT:2: Gain is reduced by 2 dB.
The AV receiver contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely event that this happens, unplug the power cord from the wall outlet, wait at least ve seconds, and then plug it back in again. Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the units malfunction. Before you record important data, make sure that the material will be recorded correctly. The AV receiver uses a battery-less memory backup system in order to retain radio presets and other settings when its unplugged or in the case of a power failure. Although no batteries are required, the AV receiver must be plugged into an AC outlet in order to charge the backup system. Before disconnecting the power cord from the wall outlet, set the AV receiver to Standby.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/ ONKYO EUROPE UK Office Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452 ONKYO CHINA LIMITED Unit 1 & 12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., Hong Kong Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/
HOMEPAGE http://www.onkyo.com/

D0606-1

SN 29344223
(C) Copyright 2006 ONKYO CORPORATION Japan. All rights reserved.

 

Tags

Grinder HV8 HDX 900 SX230-2005 YH-925 Kodak V530 711MP VX550W Scenic 500 - B GC-259Y Krups 867 Canon XL1 MFC-9660 CDP-CE405 EP2120 TL-WN353GD Philips 162 Sbcru644 CDE-7871E FR-1438-2 DVD-SH855 Yamaha 250 727AHS 500F-D PSR-47 EW502F SCL907 Coupe 2001 HD-FOX IR 1850HD Descriptif Courseware CDR796-00S TX-32LM70PA BC-30-210 DVX-700 GFA-565 R530-JA07 NP-P29 Walkie Vi 295W E1245 UE-40C7705 DS24205 CBD 100 WD-12332RD Series Blackberry 8120 ZED 420 PSR-A1000 Siemens C65 YP-CP3- MX5700D-22S KE-42MR1 Nokia 7600 97-10 Rgbv3100 ICF-F11S Xpressmusic DPA-P87 Cyclecomputing C4 Review CX7300 Cht-15Q 56012-3 Virus KC A7V266-MX Universal MXU 250 Siemens SL42 SB-24 PLC-XF42 SR-16 MP611 SMT-1722P Lide90 SGH-B100 Motorola E550 50612 DVP-NC675P UX-W55CW Dyson DC04 WM-1290FHB SU-7100 MDX-C8970R R-730A 2318584-D-WH SHR-1040K Sp5500 XD-550 Server 2 MPC600F DC-J221 CE117AE-S DPF-D70 KDL-40W4220 VL-Z7E DCR-TRV25E ZR830 1913-tdxb WD-8013C

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101