HD80 Home Theater Projector
1080p DMD DLP technology by Texas Instruments 1300 lumens of brightness 10,000:1 contrast ratio (with ImageAI-II) Native 16:9 aspect ratio; supports 2.35:1 widescreen Integrated video processing system Three digital high-definition connections including two HDMI (v. 1.3) and one DVI w/HDCP

The Astounding 1080p

Home Theater Solution
The Optoma HD80 is a true 1080p DLP home theater projector with studio-grade resolution and best all-around high-quality display experience for home theater enthusiasts. The HD80 delivers higher brightness and provides truer, more vibrant colors to the projected picture, and features unique color processing technologies. With an amazing 10,000:1 contrast ratio, the Optoma HD80 delivers great color saturation and subtle color details for the best image quality.

www.OptomaUSA.com

SPECIFICATIONS
Display Technology Brightness (Typical) Weight Resolution Dimensions (W x H x D) Contrast Ratio Noise Level Iris Control Lamp Type Lamp Life Image Size (Diagonal) Projection Distance Computer Compatibility Video Compatibility Aspect Ratio Projection Lens Keystone Correction Throw Ratio Power Supply Power Consumption Operating Temperature Displayable Colors Projection Method Uniformity Security I/O Connectors Standard Accessories Single 0.95 1080p DMD DLP Technology by Texas Instruments 1300 Lumens 10 lbs (4.5 kg) Native 1080p (1920 x 1080) 16 x 4.6 x 12.2 (406 x 117 x 310 mm) 10,000:1 (with ImageAI-II) 32dB 16 Step Iris System 300W UHP 3000 Hours 30" - 300" (0.8 to 7.6m) 4.92' - 32.8' (1.5 x 10 m) SXGA, XGA, SVGA, VGA, VESA, PC and Macintosh Compatible Full NTSC, PAL, SECAM, True HDTV (720p, 1080i/p), 480i/p, 576i/p Native 16:9, Fully Automatic 2.35:1 w/ Anamorphic Lens F=2.6~2.82, f=39.12~46.94mm, 1.2x Manual Zoom and Focus 5 Vertical 1.85~2.22:1 w/o Anamorphic Lens; 1.38~1.66:1 w/ Anamorphic Lens AC Input 90-264V, 50-60Hz 430W, < 12W Standby Mode 41 to 95F, 80% Max Humidity 16 Million Front, Rear, Ceiling Mount, Table Top 90% One Kensington Lock Port Two HDMI, DVI w/HDCP, S-Video, Composite Video, Component Video, RS-232, +12V Trigger AC Power Cord, Composite Video Cable, RS-232 Cable, Remote Control, Batteries for Remote, Lens Cap, Users Manual, Warranty Card and Quick Start Guide 2 Years Limited Parts and Labor, 1 Year on Lamp Anamorphic Lens/Sled Kit, Ceiling Mount, GrayWolfII Series Screens and Gold Service Warranty 628 3
But makes lighter areas appear dark. But makes dark areas wash out.

Now with ImageAI-II

HIGH LUMENS ALONE
Increases clarity in lighter areas.
Image Artificial Intelligence
auto adjusting light intensity output

ONLY ImageAI-II

GIVES YOU BOTH!

HIGH 1300 LUMENS

for amazing clarity in light image areas.

HIGH CONTRAST ALONE

Increases detail in darker areas.

HIGH 10,000:1 CONTRAST

for details in dark areas and shadows
ImageAI-II "Image Artificial Intelligence", Optoma's auto adjusting light intensity output, delivers an amazing 1300 lumens AND 10,000:1 contrast ratio!

+12V Trigger

RS-232

HDMI v1.3

Warranty Optional Accessories UPC

Composite Video

S-Video

Component Video

PROJECTION DISTANCE/IMAGE SIZE
Projection Distance (feet) Maximum Diagonal (inches) 44.7 59.5 74.4 89.3 104.2 119.1 134.0 Minimum Diagonal (inches) 37.2 49.6 62.0 74.4 86.8 99.2 111.6

Bering Ceiling Mount

Anamorphic Lens Kit

AVAILABLE AT

All Specifications are preliminary and subject to change without notice. 2007 Optoma Technology, Inc. DLP and the DLP logo are registered trademarks of Texas Instruments. All other names mentioned herein are property of their respective owners. [Data-HD80-002-082007]

Firmware Upgrade Procedure for the Optoma HD80 Home Theater Projector

05.04.07

Firmware Upgrade Procedure

Optoma HD80

Step 1 Power off the projector and disconnect all the cables. Do not plug in the power cord until told to later in one of the steps.
Step 2 To download the firmware upgrade software, go to the HD80 product page. On the right-hand side of the page, under Product Detail there is a link called Firmware Upgrade Software. Right click on the link, and hit Save Target As. You will prompted to save a zip file (Note where the file is saved). Unzip the zip file that was saved to your computer.
Step 3 Connect the Optoma HD80 to the PC with the RS-232 cable. Do not plug in the power cord for the projector at this time. Select the correct COM port that the RS-232 cable is connected to.
Step 4 Open the HD80 firmware folder (if it is not already open). Double click on the executable file called FlashUpgrader4Bin. exe. This will run the HD80 firmware upgrade program.
Step 5 Select appcode.hex and then click Flashto execute the firmware upgrade
Step 6 When the words Waiting for target reset appear on the screen, plug in the power cord to the HD80.
Step 7 While the firmware is upgrading, you will see the words Downloading: Appcode. hex on the screen.
Step 8 When the firmware upgrade program has completed, you will see the following displayed on the screen
Step 9 Disconnect the RS-232 cable and the power cord. The HD80 is now ready to be placed back in your home theater environment.