Reviews & Opinions
Independent and trusted. Read before buy Oregon Scientific BAR112HGA!

Oregon Scientific BAR112HGA

Manual

Download (English)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Oregon Scientific BAR112HGAAbout Oregon Scientific BAR112HGA
Here you can find all about Oregon Scientific BAR112HGA like manual and other informations. For example: review.

Oregon Scientific BAR112HGA manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Oregon Scientific BAR112HGA please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Oregon Scientific BAR112HGA photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
RandomNoise 10:41pm on Friday, July 30th, 2010 
GREAT BUY I just love this indoor/outdoor thermometer. I live along the Adirondack Parkway in NY and temperature change daily.
OdysseusMuc 11:06am on Sunday, May 2nd, 2010 
Performs as expected Works great. I assume the temperature is accurate, although I have never verified it. Out of the box, did not work I spent half hour (not counting opening the package it was packed it) trying to get the time set. No luck. GREAT PRODUCT!! I LOVE THE FACT THAT THEY HAVE A SCREW WITH A KIND OF A HANDLE WIRE THING THAT HOLDS THE THING THAT TELLS YOU THE TEMP OUTSIDE....

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

DIGITAL WEATHER FORECASTER WITH REMOTE THERMO-HYGRO SENSOR AND RADIO CONTROLLED CLOCK
MODEL NO.: BAR112HGA USERS MANUAL INTRODUCTION
Congratulations on your purchase of the Weather forecaster with cable free sensor and radio-controlled calendar clock BAR112HGA. This unit has a large four-line liquid crystal display (LCD) for displaying weather forecast information, in/outdoor temperatures and relative humidity, radio frequency (RF) controlled calendar clock and daily alarm. Also, the main unit can support up to three remote sensors. Other features include day of week display in three abbreviated languages, crescendo alarm, and interchangeable clock display modes.

MAIN FEATURES: MAIN UNIT

A A1 B C D E K L M N

J I H G F

MODE/ SE MODE /SETT

ME M ME M

CHANN EL CH AN NE L

3 M H Z

C A B L E

F R E E

MO DEL N O. BA R11 2H GA
T es te d To C o m p ly W ith F C C S t an d a r d s
F O R H O M E OR OF F IC E U S E

P Q R S T

A. FRONT DISPLAY A four line easy-to-read LCD A1. WEATHER FORECAST WINDOW Graphically illustrates a weather forecast B. [ ] BATTERY-LOW INDICATOR Activates when the remote-sensor or main unit battery power is low C. [ ] RADIO-RECEPTION SIGNAL
K. WALL-MOUNT HOLE For mounting the unit on a wall TEMPERATURE & RELATIVE HUMIDITY ALARM : ( for Channel - 1 only ) L. [ ON/OFF ] BUTTON Enables / disables HI/LO temp alarm and HI/LO % RH alarm M. [ HI/LO ] BUTTON - Set the upper or lower temperature and humidity alarm limits - Confirms alarm settings N. [ s ] BUTTON Advances the value of the settings for the HI/LO temperature and humidity alarm CLOCK : O. [ s ] BUTTON Advances the value of a setting P. [ AL ON/OFF] BUTTON Enables or disables the daily alarm
Indicates the condition of radio reception D. [ MODE/SET ] BUTTON Changes the display mode of the clock and alters time/date setting E. [ ] BUTTON Displays the alarm time or changes the alarm set time F. [ MEM ] BUTTON Displays minimum and maximum temperature and humidity readings and erases memory data
G. [ CHANNEL ] BUTTON Toggles between the remote sensor channels H. [ ((.)) ] ALARM ICON Appears when the alarm time is displayed I. J. [ 1 ] ALARM-ON ICON Appears when the alarm is activated US - TIME ZONE MAP ICON Displays Pacific (P), Mountain (M), Eastern (E) or Central (C) time-zone
Q. [ ZONE ] BUTTON Toggles between the 4 US time-zones : Pacific, Mountain, Eastern or Central R. S. T. [ RESET ] BUTTON Returns all settings to default values BATTERY COMPARTMENT Accommodates four (4) UM-3 or AA size batteries REMOVABLE TABLE STAND For standing the main unit on a flat surface
FEATURES: REMOTE THERMO-HYGRO SENSOR
TWO-LINE LCD Displays the current temperature and humidity monitored by the remote unit LED INDICATOR Flashes when the remote sensor transmits a reading C/F SLIDE SWITCH Selects between Centigrade (C) and Fahrenheit (F) CHANNEL SLIDE SWITCH Select the remote sensor Channel 1, Channel 2 or Channel 3 RESET Returns all user programmed settings to original factory set values BATTERY COMPARTMENT Accommodates two (2) UM-3 or AA-size batteries WALL-MOUNT HOLDER Supports the remote unit in wall-mounting REMOVABLE TABLE STAND For standing the remote unit on a flat surface

B. C. D. E.

G. BATTERY DOOR H. I.

BEFORE YOU BEGIN

For best operation, 1. Assign different channels to different remote units. 2. Insert batteries for remote units before doing so for the main unit. 3. Place the main unit as close as possible next to the remote unit, reset the main unit after installing batteries. This will ensure
GB easier synchronization between the transmission and reception of signals. 4. Position the remote sensor and main unit within effective transmission range, which, in usual circumstances, range of 100 feet (30 meters) under ideal conditions. Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various set-ups for best result. Though the remote sensors are weather resistant, they should be placed away from direct sunlight, rain or snow.
BATTERY AND CHANNEL INSTALLATION: REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2) UM-3 or AA size batteries. Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. 2. Select the channel number on the [CHANNEL] slide switch. 3. Select the temperature display unit on the C/F slide switch.

BATTERY INSTALLATION: MAIN UNIT
1. Gently lift up the tab on the battery compartment door. 2. Insert four (4) UM-3 or AA size batteries.
4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and secure its screws. Replace the batteries when the low-battery indicator of the particular channel lights up on the main unit. (Repeat the steps described in section BEFORE YOU BEGIN) Note that once a channel is assigned to a remote unit, you can only change it by removing the batteries or resetting the unit.
3. Replace the battery compartment door.

LOW BATTERY WARNING

When it is time to replace batteries, the low-battery indicator will be displayed for the selected channel.
Remote unit Wall-mount Table Stand
HOW TO USE THE TABLE STAND OR WALL MOUNTING
The main unit has a removable table stand which when connected can support the unit on a flat surface. Or you can remove the stand and mount the unit on a wall using the recessed screw hole. The remote sensor comes with a wall mount holder and a table stand.
Main unit Wall-mount Table Stand

THE RESET BUTTON

This button is used when the unit is operating in an unfavorable way or malfunctioning. To return all user programmed settings to their original factory values, press [ RESET ] by using a blunt stylus to hold down the button.

T EM P

GETTING STARTED
Once batteries are placed in a given remote sensor unit, it will start transmitting information at 40-second intervals. For approximately a 3-minute duration, the main unit will automatically search for signals once batteries are installed. Upon successful reception, the individual channel temperature reading will be displayed on the second line and the respective humidity reading on the third line. The main unit will automatically update its readings at about 40-second intervals.

MOD / SET E

CHANNEL
GB If no signals are received, blanks --- will be displayed and the kinetic wave icon will not show. To force a signal search: Press and hold [CHANNEL] & [MEM] for 2 seconds to enforce a 3-minute search. This is useful in synchronizing the transmission and reception of the remote and main units. Repeat this step whenever you find discrepancies between the reading shown on the main unit and that on the respective remote unit.

To display temperature / humidity readings from a remote sensor: Press [CHANNEL] until the appropriate remote sensor channel is displayed in the box under the kinetic-wave.

DISCONNECTED SIGNALS

If without obvious reasons the display for a particular channel goes blank, press [CHANNEL] & [MEM] to enforce an immediate search. If that fails, check: 1. The remote unit of that channel is still in place. 2. The batteries of both the remote unit and main unit. Replace as necessary. Note that when the temperature falls below freezing point, the batteries of outdoor units will freeze, which will lower their voltage supply and the effective range. 3. The transmission is within range and path is clear of obstacles and interference. Shorten the distance when necessary.
HOW TO CHECK REMOTE AND INDOOR TEMPERATURE & HUMIDITY
Display of readings from a remote sensor or the main unit is a onestep procedure. The remote sensor channel or the main unit display is indicated in a box under the kinetic-wave icon.
Kinetic-wave Icon Designated Display Indoor Display Remote Remote Display Display Channel 1 Channel 2 Remote Display Channel 3

TRANSMISSION COLLISION

Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporary reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature and humidity readings will resume once the interference recedes.
To display temperature / humidity readings from the main unit: Press [CHANNEL] until a dot is displayed in the box under the kinetic-wave.
HOW TO READ THE KINETIC WAVE DISPLAY
The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms:
The unit is in searching mode. Transmission data are securely registered. No signal received in search mode.

COMFORT LEVEL INDICATORS

The comfort level indicators COM, WET or DRY will tell you if the curent environment is comfortable, too wet or too dry. The comfort indicator will appear on the display when the following conditions are satisfied: Indicator displays on the unit Temperature Range Humidity Range Shows that the Current Environment Ideal range for both relative humidity and temperature Contains excess moisture. Contains inadequate moisture
20C to 25C 40%RH(68F to 77F) 70%RH COM -5C -+ 50C OVER(23F - 122F) 70%RH -5C -+ 50C Below (23F - 122F) 70%RH Less than 20C( 68F) or More than 25C (77F) 40%RH to 70%RH

REMOTE SENSOR SCANNING

The unit can be set to automatically scan and display readings from the remote sensors and indoor readings. When the remote-sensor scanning mode is active, the display will show the readings from one channel for about 4-second and then proceed to the next channel display. To activate the remote-sensor scanning mode: Press and hold [CHANNEL] for 2 seconds. To deactivate the remote-sensor scanning mode: Press either [CHANNEL], [MEM], [HI/LO], [ s ], [ON/OFF] (TEMP % RH AL)

DRY No Indicator

No comment
TEMPERATURE, HUMIDITY & PRESSURE TREND INDICATORS
The temperature-trend, humidity-trend and pressure-trend indicators show the trends of collected readings. Arrows indicate a rising, steady or falling trend.
MAXIMUM AND MINIMUM TEMPERATURE AND HUMIDITY
The maximum and minimum recorded temperature and humidity readings will automatically be stored in the memory. To display the maximum and minimum display memory: 1. Select the channel to be checked. 2. Press [MEM] once to display the maximum temperature and humidity and press [MEM] again to display minimum temperature and humidity. The respective indicators, MAX or MIN will be displayed. To clear the memory: Press and hold [MEM] for 2 seconds.
Arrow indicator Temperature Trend

Rising

Steady

Falling

Arrow indicator Humidity Trend Rising Steady Falling
If you press [MEM] now, the maximum and minimum recordings will have the same values as the current ones until different readings are recorded.

Arrow indicator

HOW TO USE CHANNEL-1 TEMPERATURE/ HUMIDITY ALARM

Rising Steady Falling

Pressure Trend
Upper and lower temperature and humidity limits for Channel-1 can be set so that an alarm activates when the limits are exceeded. The high and low temperature and humidity displays are selected by sequentially pressing [ HI/LO ].
Note: If the reading goes above or below the measuring range of the main unit or the remote unit ( stated in specification), the display will show HHH or LLL.
The high-low displays are as follows: Sequence Pressing HI/LO once Pressing HI/LO twice Pressing HI/LO third time Pressing HI/LO fourth time Respective Display Enters HI temperature display Enters HI humidity display Enters LO temperature display Enters LO humidity display
display. The respective HI, LO or both indicators will be displayed to signify the status of the alarm. If a channel other than channel-1 is selected, the display will switch to channel-1 and flash when the alarm activates. If left untouched, the alarm will activate for 1 minute. Press either [CHANNEL], [MEM], [HI/LO], [ s ], [ON/OFF] (TEMP % RH AL) to momentarily stop the alarm. The alarm will activate again if the limit continues to exceed the set limit. Note: If a second limit is passed while an alarm is active, the first alarm will complete its 1-minute cycle and the alarm will continue to activate for a second minute to indicate that a second limit has been surpassed. To disable an alarm: 1. Enter the setting mode by pressing [HI/LO]. 2. Then, press [ ON/OFF]. The alarm has been disabled. Display will show --- to indicate such deactivation and will not sound at the previously set limit. To disable a sounding alarm: Press either [CHANNEL], [MEM], [HI/LO], [ s ], [ON/OFF] (TEMP % RH AL)

To set a high or low temperature or humidity alarm: 1. Press [HI/LO], Channel-1 will be displayed. 2. Press [ s ] to set the temperature or humidity limit. Each press will increase increments by one degree or percentage. Press and hold the button for a rapid-scrolling sequence by increments of five. Note: The temperature range is from -50C (-58F) to +70C (158F). If this is the first time you set the limits, the lower limit will start from -50C (-58F) and the upper limit +70C (158F). Otherwise, the reading will start from the temperature last selected. The humidity range is from 2% to 98%. If this is the first time you set the limits, the lower limit will start from 2% and the upper limit 98%. Otherwise, the reading will start from the humidity last selected. 3. Repeat the steps to set the upper temperature and humidity setting and the lower temperature and humidity settings. 4. When finished, press [HI/LO] to set another limit or wait 16 seconds and the unit will automatically return to the normal
WEATHER FORECAST FUNCTION
The unit is capable of detecting atmospheric pressure changes. Based on collected data, it can predict the weather for the forthcoming 12 to 24 hours. The effective range covers an area of 18 to 30 miles.
Indicator displays on the unit
MODE 2. Hour-Minute-Day of the Week (of local time) Month-Day (of local time)
Each press on the [MODE/SET] button will toggle the display in the above order. Note: The bottom line of the display will be replaced by the alarm ] button is pressed. time if the [

Forecast

Slightly Cloudy Cloudy

ABOUT RADIO RECEPTION

The BAR112HGA is designed to automatically synchronize its calendar clock when it is within range of the radio signal from the U.S. Atomic clock. When the unit is receiving radio signal, the RADIO RECEPTION signal will start to blink. A complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. When the reception is complete, the RADIO RECEPTION signal will stop blinking. The strength of the reception will remain until the next scanning cycle takes place. For better reception, place the clock away from metal objects and electrical appliances to minimize interference. If you wish to disable the auto-reception feature, press the [ ZONE ] button for three seconds. The radio reception signal [ ] and the outline of the US-Map icon will disappear. The unit will not respond to radio signals. ] (clock) button for three To enable the feature again, press the [ seconds. The radio reception signal [ ] and the outline of the US-Map icon will start blinking to initiate reception automatically.
1. The accuracy of a general pressure-based weather forecast is about 70% to 75%. 2. The weather forecasts from this unit are predictions that cover the next 12 to 24 hours. It may not necessarily reflect the current situation. 3. The Sunny icon, implies clear weather.

CALENDAR CLOCK DISPLAY MODES
The BAR112HGA supports 2 time display modes in the sequence of: MODE 1. Hour-Minute-Second (of local time) Month-Day (of local time)

- Strong

For the US time zone, select the time-zone by using the [ZONE] button to toggle Pacific, Mountain, Eastern or Central. If there is a setting you do not wish to change, simply press [MODE/ SET] to bypass the setting.

- Weak

When you are done, press [MODE/SET] to exit. The display will return to the mode last chosen.

- No signal

HOW TO SET AND ARM THE ALARMS
The BAR112HGA has a daily alarm function. To set an alarm: ] once to enter the Alarm display mode. 1. Press [ 2. Press and hold [ ] for three seconds. The hour digits will blink. ] 3. Enter the hour using [ ]. The minute digits will blink. 4. Press [ ] 5. Enter the minutes using [ 6. Press [ ] to exit. The [ ] icon for the alarm chosen will be displayed indicating the alarm set above is now armed. You can also arm or disarm an alarm by pressing the [ AL ON/OFF ] button. When an alarm is armed, it will go off at the set time. The four-step crescendo function allows the alarm to start off gently and step up its intensity every 20 seconds for four times. Without interruption, the alarm will sound for a total of two minutes. If no key is pressed to turn off the alarm within these 2 minutes, the alarm will sound once more after 8 minutes.

- Receiving

HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE/SET] for three seconds. The hour digits will blink. Press [ ] (clock) to select the hour. Keep pressing the button to
increase the value rapidly. Press [MODE/SET] to confirm. The minute digits will blink. Repeat the same procedure to set the minutes, year, month, day and display language. Note: The time and date are displayed in 12-HOUR clock format. For the language display, you can choose among English (E), French (F) and Spanish (s).

HOW TO STOP AN ALARM

To stop an alarm, you can use either press [ ] button or [ AL ON/OFF ] button. Pressing [ ] will stop the alarm, which is still armed and will activate at the set time the following day. If [ AL ON/OFF ] button is pressed instead, the alarm will be stopped and deactivated all together.
4. Do not tamper with the units internal components. Doing so will terminate the units warranty and may cause damage. The unit contains no user-serviceable parts. 5. Only use new batteries as specified in this instruction manual. Do not mix new and old batteries as the old batteries may leak. 6. Read this instruction manual thoroughly before operating the unit.

SPECIFICATIONS NOTE ON C AND F
The temperature display designation of C or F on the main display unit will override the display selection made on the remote sensor. Whatever the display unit of the remote sensor is, it will only apply to the remote sensor itself and the temperature unit will automatically be converted to the one of the main unit. (i.e. F) Temperature Measurement Main unit Indoor Temperature measurement Proposed operating range Temperature resolution : -5.0C to +50.0C (23.0F to 122.0F) : 0.1C to (0.2F)

MAINTENANCE

When handled properly, this unit is engineered to give you years of satisfactory service. Here are a few product care instructions: 1. Do not immerse the unit in water. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. 2. Do not clean the unit with abrasive or corrosive materials. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. 3. Do not subject the unit to excessive: force, shock, dust, temperature, or humidity. Such treatment may result in malfunction, a shorter electronic life span, damaged batteries, or distorted parts.
Relative Humidity Operating : 25% RH to 90% RH range Temperature Display in F format Remote thermo-hygro unit Proposed operating range Temperature resolution
: -20.0C to +60.0C (-4.0F to 140.0F) : 0.1C (0.2F)
Relative Humidity Operating : 25% RH to 90% RH range
Power Main unit Remote sensing unit Weight Main unit Remote sensing unit Dimension Main unit Remote sensing unit
: use four (4) UM-3 or AA 1.5V battery : use two (2) UM-3 or AA 1.5V battery
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer of an experienced radio/TV technician for help. Company Name: Oregon Scientific, Inc. Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA Telephone Number: (1)503-6398883 Name and model number of the product: Digital Weather Forecaster with Remote Thermo-Hygro sensor and Radio Controlled Clock BAR112HGA

: 6.6 ounces (without battery) : 2.6 ounces (without battery)
: 6.44" x 3.48" x 1.12" (LxWxD) : 4.2" x 2.8" x 0.84" (L x Wx D)

NOTE ON COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC : NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

CAUTION

The content of this manual is subject to change without further notice. Due to printing limitation, the displays shown in this manual may differ from the actual display. The contents of this manual may not be reproduced without the permission of the manufacturer.

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its operation, please contact our customer care department at 800-853-8883 or via email at helpme@oscientific.com.

WARRANTY

This product is warranted to be free of manufacturing defects for a period of 1 year from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. No returns may be made without a return authorization. Please retain your retail receipt as you may be asked to provide a copy of it for proof of date purchased. This warranty does not cover product subjected to abuse, misuse, accidental damage or tampering.

MODEL: BAR112HGA

Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento

doc1

MULTI-CHANNEL IN-OUT CABLE FREE THERMOMETER
MODEL: EMR812 USERS MANUAL

MAIN FEATURES: MAIN UNIT

INTRODUCTION
Congratulations on your purchase of the EMR812 Multi-Channel In-Out Thermometer with 433MHz cable free sensor. The EMR812 is an easy-to-use, state-of-the-art thermometer. The basic package comes with a main unit, which is the temperature station, and a remote unit, the thermo sensor. The main unit has extra-large read-outs for indoors temperature and for that collected and transmitted by the remote unit. The main unit can support up to three remote units. The main unit is capable of monitoring temperature changes of remote sites. By setting the upper and lower temperature limits the alarm will activate when those limits are exceeded. Also, the maximum and minimum temperature of different sites can also be retrieved quickly. No wire installation is required between the main and remote units. As the EMR812 operates at 433MHz, it can be used in the U.S. and most places in Continental Europe.
C HA N NE L M EM C LE A R

3 M H z

C A B L E

F R E E

O N /O FF R ESET

T EM P AL

GB A EXTRA LARGE TWO - LINE DISPLAY Facilitates easy reading of remote and indoors temperatures B CHANNEL BUTTON Selects among different channels C MEMORY (MEM) BUTTON Recalls the maximum or minimum temperature of individual channels D CLEAR BUTTON Clears the maximum and minimum temperatures of individual channels E HIGH (HI) / LOW (LO) BUTTON Sets the upper or lower temperature alarm limits of individual channels F ADVANCE (s ) BUTTON Sets the readings for the upper or lower temperature of individual channels G TEMPERATURE ALARM (TEMP AL) ON/OFF BUTTON For turning on or off, the temperature alarm of individual channels H RESET BUTTON For returning all settings to default values and erases temperature memories I C/F SLIDE SWITCH For selecting between degree Centigrade (C) and Fahrenheit (F) J BATTERY COMPARTMENT Accommodates two UM3 or "AA" size alkaline batteries K RETRACTABLE TABLE STAND For standing the main unit on a flat surface 2
L WALL - MOUNT RECESSED HOLE For mounting the main unit on a wall
FEATURES: REMOTE THERMO-HYGRO SENSOR
A. TWO-LINE LCD Displays the current temperature and humidity monitored by the remote unit B. LED INDICATOR Flashes when the remote sensor transmits a reading C. C/F SLIDE SWITCH Selects between Centigrade (C) and Fahrenheit (F) D. CHANNEL SLIDE SWITCH Select the remote sensor Channel 1, Channel 2 or Channel 3 E. RESET Returns all user programmed settings to original factory set values F. BATTERYCOMPARTMENT Accommodates two (2) UM-3 or AA-size batteries G. BATTERY DOOR H. WALL-MOUNT HOLDER Supports the remote unit in wall-mounting I. REMOVABLE TABLE STAND For standing the remote unit on a flat surface
3. Initially place both units close together. This will ensure synchronization between the remote unit and the main unit. Then, install batteries for the main unit or reset the main unit. 4. Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is 30 meters. Note : Building materials and where the main and remote units are positioned can vastly affect effective range. Try various set-ups for best result. Though the remote units are weather proof, they should be placed away from direct sunlight, rain or snow.
BATTERY AND CHANNEL INSTALLATION: REMOTE UNIT
The remote thermo-hygro sensor unit uses two (2) UM-3 or AA size batteries. Follow these steps to install / replace batteries: 1. Remove the screws on the battery compartment. 2. Select the channel number on the [CHANNEL] slide switch. 3. Select the temperature display unit on the C/F slide switch.

BEFORE YOU BEGIN

For best operation, 1. Assign different channels to different remote units. 2. Insert batteries for remote units before doing so for the main unit. 3
3. Replace the battery compartment door. 4. Insert the batteries strictly according to the polarities shown therein. 5. Replace the battery compartment door and secure its screws. Replace the batteries when the low-battery indicator of the particular channel lights up on the main unit. (Repeat the steps described in section BEFORE YOU BEGIN) Note that once a channel is assigned to a remote unit, you can only change it by removing the batteries or resetting the unit.

LOW BATTERY WARNING

Replace the batteries when the low-battery indicator of the indoor temperature display lights up. (Repeat the steps described in section "BEFORE YOU BEGIN") Respectively, for a remote sensor unit, the low-battery icon will show when the channel is selected.
BATTERY INSTALLATION: MAIN UNIT
The main unit uses two UM3 or "AA" size alkaline batteries. To install them, 1. Slide open the battery compartment door. 2. Insert the batteries strictly according to the polarities shown therein.

GETTING STARTED

Once batteries are in place for the remote units, they will start transmitting temperature readings at 30-second intervals. The main unit will also start searching for signals for about a minute once batteries are installed. Upon successful reception, the individual channel temperatures will be displayed on the top line and the indoors temperature on the bottom line. The main unit will automatically update its readings at about 30-second intervals.
goes blank , press CHANNEL and MEM to enforce an immediate search. If this fails, check the following. 1. The remote unit of that channel is still in place. 2. The batteries of both the remote unit and main unit and replace as necessary. Note : When the temperature falls befow freezing point, the batteries of outdoor units will freeze, lowering their voltage supply and the effective range. 3. The transmission is within range and the path is clear of obstacles and interference. Shorten the distance when necessary.
If no signals are received, blanks will be displayed and the kinetic wave icon will show . Press CHANNEL and MEM simultaneously to enforce another search for about 30 seconds. This is useful in synchronizing the transmission and reception of the remote and main units. Repeat this step whenever you find discrepancies between the reading shown on the main unit and that on the respective remote unit.

TEMPERATURE TREND

The temperature trend indicator on the screen shows the trend of readings collected at that particular remote site. Three trends, rising, steady and falling, will be shown.
Arrow indicator Temperature Trend Rising Steady Falling
HOW TO CHECK REMOTE AND INDOORS TEMPERATURES
The indoors temperature is shown on the bottom line of the display. As for the remote sites or channels, press CHANNEL to go from one channel to another. The kinetic wave display on the channel number indicates the reception of that particular channel is in good order.

DISCONNECTED SIGNALS

If without obvious resasons the display for a particular channel 5
If the temperature goes above or below than the temperature measuring range of the main unit or the remote unit ( stated in specification), the display will show HHH or LLL.
HOW TO READ THE KINETIC WAVE DISPLAY
The kinetic wave display shows the signal receiving status of the main unit. There are three possible forms:
The unit is in searching mode. Temperature readings securely registered. No signals. are
HOW TO USE TEMPERATURE ALARMS
The temperature alarms allow you to set the upper and lower limits of readings for individual channels. The alarm will activate if a limit is exceeded. To set the alarm, 1. Select the channel to be set. 2. Press the HI/LO button for the upper (HI) or lower (LO) limit. An OFF message will be displayed if the alarm for that limit is turned off. 3. Use the ADVANCE ( s ) button to set the upper or lower temperature. If this is the first time you set the limits, the lower limit will start from -50C (-58F) and the upper limit +70C (158F). Otherwise, the reading will start from the temperature last selected. Each press on the button will increase the temperature by one degree. Holding on the button will step up the increment by five. 4. Press TEMP AL ON/OFF button to switch on or off the Max./ Min. temperature alarm. The set limit will be displayed. 5. Press HI/LO button to set another limit or return to normal display. The respective HI, LO or both indicators will light up to signify the status of the alarm. When an alarm activates, the display will switch to the respective channel with the display flashing. If undisturbed, it will alarm for one minute. Press any key to momentarily mute the alarm. It will alarm again if the temperature continues to exceed the set limit. To disable an alarm altogether, select the channel and use TEMP AL ON/OFF to turn it off. If you have set the upper and lower temperatures for more than one 6

MAXIMUM AND MINIMUM TEMPERATURES
The maximum and minimum recorded indoor temperatures and those of each channel will be automatically stored in memory. To display them, 1. Select the channel to be checked. 2. Press MEM once to display the maximum temperature and again the minimum temperature. The respective indicators, MAX or MIN will be displayed. To clear the memory, press CLEAR. All segments of the display will light up for two seconds. The display will return to the last screen with maximum and minimum temperature erased from memory. If you press MEM now, the maximum and minimum temperatures will have the same values as the current ones until different readings are recorded.
channel and the limits are exceeded, the alarm will activate with the display switching from one channel to another at five seconds intervals.
As for the remote unit, it comes with a wall-mount holder and a removable stand. Use either to hold the unit in place.
Main unit Wall-mount Table Stand

TRANSMISSION COLLISION

Signals from other household devices, such as door bells, home security systems and entry controls, may interfere with those of this product and cause temporarily reception failure. This is normal and does not affect the general performance of the product. The transmission and reception of temperature readings will resume once the interference recedes.
Remote unit Wall-mount Table Stand

NOTE ON C AND F

The unit of temperature display is selected on the C/F slide switch. Select C for Centigrade or F for Fahrenheit. Note : The remote temperature display on the main unit is dominated by the selection on the C/F slide switch of the main unit. Whatever the display units of the remote sensors are, they will be automatically converted to the chosen one of the main unit.
HOW TO USE THE TABLE STAND OR WALL MOUNTING
The main unit has a retractable table stand, which when flipped open, can support the unit on a flat surface. Or you can flip close the stand and mount the unit on a wall using the recessed screw hole. 7

THE RESET BUTTON

This button is only used when the unit is operating in an unfavorable way or malfunctioning. Use a blunt stylus to hold down the button. All settings will return to their default values.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: 1. Do not immerse the unit in water. 2. Do not clean the unit with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuit. 3. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. 4. Do not tamper with the units internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts. 5. Only use fresh batteries as specified in the users manual. Do not mix new and old batteries as the old ones may leak. 6. Always read the users manual thoroughly before operating the unit. Main unit

SPECIFICATIONS

Temperature Measurement
Indoor Temperature measurement Displayed IN temperature range Proposed operating range Temperature resolution Remote Temperature measurement Displayed OUT temperature range Proposed operating range Temperature resolution Remote unit Displayed range Proposed operating range Temperature resolution RF Transmission Frequency No. of Remote unit 8 : -58.0F to 158.0F (-50.0C to +70.0C) : -4.0F to 140.0F (-20.0C to +60.0C) : 0.2F (0.1C) : 433 MHz : Maximum of 3 : -58.0F to 158.0F (-50.0C to +70.0C) : 23.0F to 122.0F (-5.0C to +50.0C) : 0.2F (0.1C) : 14.2F to 158.0F (-9.9C to +70.0C) : 23.0F to 122.0F (-5.0C to +50.0C ) : 0.2F (0.1C)
RF Transmission Range Temperature sensing cycle
: Maximum 100 feet (30 meters) : around 30 seconds : use 2 pcs UM-3 or AA 1.5V alkaline battery : use 2 pcs UM-4 or AAA 1.5V alkaline battery : 8.82 ounces (250 g) (without batteries) : 3.51ounces(100g) (without batteries) : 4.61x4.21x1.07inches (117 x 107 x 26 mm) : 3.62x2.36x.83 inches (92 x 60 x 21 mm)
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC : NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer of an experienced radio/TV technician for help.

Main unit Remote sensing unit

Weight

Dimension

NOTE ON COMPLIANCE

Company Name: Oregon Scientific, Inc. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operations. 9 Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA Telephone Number: (1)503-6398883 Name and model number of the product: Digital Weather Forecaster with Remote Thermo-Hygro sensor and Radio Controlled Clock BAR112HGA

CAUTION

The content of this manual is subject to change without further notice. Due to printing limitation, the displays shown in this manual may differ from the actual display. The manufacturer and its suppliers held no responsibility to you or any other person for any damage expenses, lost profits, or any other claim arise by using this product. The contents of this manual may not be reproduced without the permission of the manufacturer.

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its operation, please contact our customer care department at 800-853-8883 or via email at helpme@oscientific.com.

WARRANTY

This product is warranted to be free of manufacturing defects for a period of 3 months from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. No returns may be made without a return authorization. Please retain your retail receipt as you may be asked to provide a copy of it for proof of date purchased. This warranty does not cover product subjected to abuse, misuse, accidental damage or tampering.

MODEL: EMR812

Instruction Manual **** Mode D'emploi **** Bedienungsanleitung **** Manuale di Istruzioni **** Instrucciones de Funcionamiento

 

Tags

KD-420Z Doctor 750X Logan VAN KX-F2710 Investigation D Pentax SF10 NX8420 Series Tracker 5505 Review Scaleo 800 Tools OKI C110 Dr-mv78 Studio V3 Battleship Maxeb 7090 LES Paul Power 832 Underground 2 Series 72600 28PT7306 58R SCM695X BW50-2005 HP4500 2 0 LDS5811ST GC-405X XD123 YST-SW305 T7400 Death Star Euroset 5005 2232GW DVP3120 55 BM 3982 RB-1080 Finecam S5R FD235HF Risk 2003 Polaroid M630 CX7000F UN46C8000 A300D CVA-1014R Stinger Music Transsport 1994 MH040fxea2C HT 40 MS3446VRW CDP-CX200 XTR-400 ICF-M33RDS Comfort C4100 HI 713 CDX-MP450X P4U800-X - 1957 DVP-FX750 DV256K Speed 7823 PS122KB GZ-MG50EK PB-100-TRS-80- VP-D200 FLS1002V PE8720 LQ-870 Maker EC7 LK275 Calgary CD30 Color 1160 ALL-IN-one LX LV700 Touch 153 DXM09 Series Printer MT-120S SE 12 TX650W Voice PV520A Modulo MX5800SA-22S ZPS2102 GY501 CLX-3175 SEE 169 H SPF-105V Ultra Zoom CMT-SPZ70 LKA10 A-407R N800C UF-S1 SPF-1000P

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101