Oregon Scientific BAR628HG
Here you can find all about Oregon Scientific BAR628HG like manual and other informations. For example: review.
Oregon Scientific BAR628HG manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Oregon Scientific BAR628HG please write about it to help other people. [ Report abuse or wrong photo | Share your Oregon Scientific BAR628HG photo ]
Oregon Scientific BAR628HG
User reviews and opinions
|deko||11:08pm on Tuesday, September 28th, 2010|
|Perfect for forcasting forthcoming weather. Oregon Scientific are at the forthfront of digital weather stations. Perfect for forcasting forthcoming weather. Oregon Scientific are at the forthfront of digital weather stations.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Thank you for selecting the Oregon ScientificTM Weather Station Advanced (BAR628HG / BAR628HGU). This device bundles precise time keeping, weather forecast, and indoor and outdoor temperature and humidity monitoring features into a single tool you can use from the convenience of your home. In this box, you will find: Main unit Remote sensor (THGR122NX) Main unit batteries, 3 x UM-3 (AA) 1.5V Remote sensor batteries, 2 x UM-4 (AAA) 1.5V
Weather Station Advanced Model: BAR628HG / BAR628HGU
CONTENTS Contents... 1 Introduction... 1 Product Overview... 2 Front View... 2 Back View... 2 LCD Display... 3 Remote Sensor (THGR122NX).. 3 Getting Started... 4 Batteries.. 4 Change Settings.. 4 Table Stand or Wall Mount.. 4 Remote Sensor (THGR122NX). 4 Setup Sensor.. 4 Data Transmission... 5 Search for Sensor.. 5 Clock.. 5 Turn Clock ON / OFF.. 5 Set Clock / Calendar.. 5 Switch Clock Display.. 6 Alarm.. 6 View Alarm Settings.. 6 Set Alarm.. 6 Activate Alarm... 6 Silence Alarm.. 6 Weather Forecast.. 6 Temperature and Humidity. 6 Select Temperature Unit.. 6 Select Channel Number.. 6 Minimum / Maximum Records.. 6 Moon Phase... 6 Reset System... 7 Safety and Care.. 7 Warnings... 7 Troubleshooting.. 7 Specifications... 7 Main Unit Dimensions... 7 Remote Sensor Dimensions. 7 Temperature... 7 Relative Humidity.. 7 Weather Forecast.. 7 Remote Sensor (THGR122NX).. 7 Clock.. 7 Power... 8 About Oregon Scientific... 8 Declaration of Conformity.. 8
Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know.
FRONT VIEW 1. LCD display and : Increase or decrease setting / activate or 2. deactivate RF Clock 3. MODE: Change display / settings 4. : View alarm status; set alarm 5. CHANNEL: Switch remote sensor 6. : Press to activate or deactivate alarm
1. 2. 3. 4. 5. 6. 7.
SNOOZE button Wall mount hole Battery compartment (cover on) Table stand Battery compartment (cover off) C / F switch MEM: View current, maximum, and minimum temperature / humidity readings 8. RESET hole
REMOTE SENSOR (THGR122NX)
A. B. C. D.
Weather Forecast Area Outdoor Temperature & Humidity Area Indoor Temperature & Humidity Area Clock / Alarm / Calendar Area
1. LCD display 2. LED status indicator
1. Weather display 2. Outdoor humidity 3. Sensor signal 4. Low battery icon for sensor 5. Outdoor temperature 6. Indoor humidity 7. Indoor icon 8. Low battery icon for main unit 9. Indoor temperature 10. Time 11. Radio Frequency (RF) reception icon 12. Alarm activated 13. Alarm setting 14. Calendar 15. Moon phase
1. 2. 3. 4.
Wall mount hole RESET hole CHANNEL number (1-3) Battery compartment (Battery compartment cover not shown)
BATTERIES Batteries are supplied with this product: Main unit 3 x UM-3 (AA) 1.5V batteries Remote unit 2 x UM-4 (AAA) 1.5V batteries Insert batteries before first use, matching the polarity (+ and -) as shown in the battery compartment. For best results, install batteries in the remote sensor before the main unit. Press RESET after each battery change. NOTE Do not use rechargeable batteries. shows when batteries are low.
TABLE STAND OR WALL MOUNT Use the stand on the back of the main unit / remote sensor, or mount it on a wall with a nail. To attach the main unit stand:
NOTE It is recommended that you use alkaline batteries with this product for longer performance. UNIT Main Remote LOCATION Indoor Temperature / Humidity Area Outdoor Temperature / Humidity Area
To use the main unit wall mount:
Installing the batteries: To use the remote sensor stand or wall mount:
CHANGE SETTINGS To change, time, calendar and language settings: 1. Press and hold MODE for 2 seconds to enter setting mode. 2. Press or to change settings. (To reach the setting you want quickly, press and hold or.) 3. Press MODE to confirm.
This product is shipped with a THGR122NX Thermo / Hygro Sensor that collects Temperature and Humidity data. Data can be collected from up to 3 sensors. Additional sensors sold separately.
SETUP SENSOR 1. Open the remote sensor battery compartment with a small Phillips screwdriver. 2. Insert the batteries, matching the polarity (+ and -) as shown in the battery compartment.
SWITCH OPTION Channel Channel 1-3. If you are using more than one sensor, select a different channel for each sensor.
3. Set the channel. The switch is located in the battery compartment. 4. Place the sensor near the main unit. Press RESET on the sensor. Then, press and hold MEM and CHANNEL on the main unit to initiate signal sending between the sensor and the main unit. The reception icon on the main unit will blink for approximately 3 minutes while it is searching for the sensor. (Refer to the "Data Transmission" section for more information.) 5. Close the remote sensor battery compartment. 6. Secure the sensor in the desired location using the wall mount or table stand.
SEARCH FOR SENSOR To search for a sensor, press and hold MEM and CHANNEL (on the main unit) for 2 seconds. NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location. NOTE Signals from household devices such as doorbells, electronic garage doors, and home security systems may cause temporary reception failure. This is normal and does not affect general product performance. The reception will resume once the interference ends.
The clock automatically synchronizes the current time and date when it is brought within range of the radio signal DCF77 generated from Frankfurt, Germany for Central Europe (model BAR628HG) or MSF60 generated from Anthorn, England (model BAR628HGU). NOTE The signals are collected by the main unit when it is within 1500 km (932 miles) of a signal. For best results: Insert the batteries and select the channel before you mount the sensor. Place the sensor out of direct sunlight and moisture. Do not place the sensor more than 30 metres (98 feet) from the main (indoor) unit. Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects. Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission. You may need to experiment with various locations to get the best results. Initial reception takes 2-10 minutes, and is initiated when you first setup the unit, and whenever you press RESET. Once complete, the reception icon will stop blinking. The icon is shown in the Clock Area. STRONG SIGNAL WEAK SIGNAL NO SIGNAL
To force a manual search for clock signals, press and hold for 2 seconds. If no signal is found, check the batteries.
TURN CLOCK ON / OFF Perform this step if you cannot receive clock signals. Press and hold for 2 seconds. Then, manually set the clock following the Set Clock instructions (below). The signal icon indicates that the clock feature is ON. No icon means that it is OFF.
DATA TRANSMISSION Data is sent from the sensor(s) every 40 seconds. The reception icon shown in the Temperature and Humidity Areas show the status. ICON DESCRIPTION Main unit is searching for sensors. At least 1 channel has been found. Channel 1 is selected (number will change depending on the sensor you select). --- shows in Outdoor The selected sensor cannot Temp / Humidity Area be found. Search for the sensor or check batteries.
SET CLOCK / CALENDAR You only need to do this if you have disabled the clock feature (for example, if you are too far from or cannot receive a signal). 1. Press and hold MODE for 2 seconds. The Clock Area will blink. 2. Select the hour, minute, year, month, day, and day of the week language. Press or to change the setting. 3. Press MODE to confirm. The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY Press MODE to toggle between Clock with Seconds and Clock with Weekday display.
SELECT TEMPERATURE UNIT Slide the C / F switch into the desired location. The switch is located in the main unit battery compartment. The setting for the main unit overrides the remote sensor setting.
This product is equipped with a 2-minute crescendo alarm. SELECT CHANNEL NUMBER Press CHANNEL to switch between sensors 1-3. VIEW ALARM SETTINGS Press. The alarm time and alarm status will show in the Clock Area. The icon shows the selected sensor. KINETICWAVE ICON DESIGIndoor Remote Remote Remote NATED Display Display Display Display DISPLAY Channel 1 Channel 2 Channel 3 To auto-scan between sensors, press and hold CHANNEL for 2 seconds. Each sensors data will be displayed for 3 seconds. To end auto-scan, press CHANNEL or MEM. NOTE If you use a sensor that collects only temperature data, humidity will not be shown. NOTE For more information on the sensor see Remote Sensor THGR122NX Section. SILENCE ALARM When the alarm time is reached, the crescendo alarm will sound for 2 minutes. To silence the alarm: Press SNOOZE to silence it for 8 minutes. OR Press any key except SNOOZE to mute the alarm and activate it again after 24 hours. MINIMUM / MAXIMUM RECORDS The MEM button is located in the main unit battery compartment. Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records. To clear the records, press and hold MEM for 2 seconds. A beep will sound to confirm that the memory has been cleared.
SET ALARM 1. Press to switch to alarm display. 2. Press and hold again for 2 seconds. The alarm settings will blink. 3. Select the hour and minute. Press or to change settings. Press to confirm.
ACTIVATE ALARM Press to activate or deactivate the alarm. shows in the Clock / Alarm Area when the alarm is activated.
If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes. The Calendar must be set for this feature to work, see Set Clock section. Press or to view the moon phase for the next or previous day. Press and hold or to scan quickly through the years (2001 to 2099).
This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with 70 to 75 percent accuracy. The weather forecast is always displayed. SUNNY PARTLY CLOUDY CLOUDY RAINY
New Moon Waxing Crescent First Quarter Waxing Gibbous Full Moon Waning Gibbous Last Quarter
TEMPERATURE AND HUMIDITY
This product can display current, minimum, and maximum temperatures and humidity percentage information collected by the remote sensors and main (indoor) unit. Outdoor data is collected and displayed every 40 seconds. Indoor data is collected and displayed every 10 seconds. 6
The RESET button is located in the main unit battery compartment. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or clock).
MAIN UNIT DIMENSIONS LxWxH 116 x 55 x 127 mm (4.6 x 2.2 x 5 inches) 186 g (6.6 ounces) without battery
SAFETY AND CARE
Clean the product with a slightly damp cloth and alcoholfree, mild detergent. Avoid dropping the product or placing it in a high-traffic location.
REMOTE SENSOR DIMENSIONS LxWxH 92 x 60 x 20 mm (3.6 x 2.4 x 0.79 inches) 63 grams (2.22 ounces) without battery
This product is designed to give you years of service if handled properly. Oregon Scientific will not be responsible for any deviations in the usage of the device from those specified in the user instructions or any unapproved alterations or repairs of the product. Observe the following guidelines: Never immerse the product in water. This can cause electrical shock and damage the product. Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity. Do not tamper with the internal components. Do not mix new and old batteries or batteries of different types. Do not use rechargeable batteries with this product. Remove the batteries if storing this product for a long period of time. Do not scratch the LCD display. NOTE The technical specification of this product and contents of this user guide are subject to change without notice. Images not drawn to scale.
TEMPERATURE Unit Indoor range C / F -5C to 50C (23F to 122F) -20C to 60C (-4F to 140F) 0.1C (0.2F)
RELATIVE HUMIDITY Range Resolution Memory 25% to 95% 1% Minimum / maximum
PROBLEM SYMPTOM Calendar Clock Strange date / month Cannot autosynchronize the date and time REMEDY Change language (5) 1. Adjust batteries (4) 2. Press RESET (7) 3. Manually activate clock feature (5) Temp Remote sensor Shows LLL or HHH Cannot locate remote sensor Cannot change channel Data does not match main unit Temperature is out-of-range Check batteries(5) Check location (5) Check sensors. Only one sensor is working (5) Initiate a manual sensor search (5)
WEATHER FORECAST Display Rainy, cloudy, partly cloudy, sunny
REMOTE SENSOR (THGR122NX) RF frequency Range 433 MHz 30 metres (98 feet) with no obstructions every 40 seconds 1-3
Cannot adjust clock Disable clock (5)
Transmission Channel No.
CLOCK RF Clock Clock display Hour format Auto or manual (disabled) HH:MM:SS 12hr AM / PM (Model BAR628HGU) 24hr (Model BAR628HG) DD / MM; weekday in 5 languages (E, D, F, I, S)
Single alarm with 2-minute crescendo and 8-minute Snooze
POWER Main unit batteries Sensor batteries 3 x UM-3 (AA) 1.5V 2 x UM-4 (AAA) 1.5V
NOTE It is recommended that you use alkaline batteries with this product for longer performance.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If youre in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support OR Call 1-800-853-8883. For international inquiries, please visit: www2.oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Weather Station Advanced (Model: BAR628HG /BAR628HGU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.
COUNTRIES RTTE APPROVAL COMPLIED All EC countries, Switzerland CH and Norway N
2007 Oregon Scientific. All rights reserved. P/N: 086L003567-069
Sedan Env06 SGH-U708 Studio 12 DSC-H9 Monopoly Deal R40W46 34 LI DVD-R150K Sender Vintage2-AE1 Express R-85ST-A STR-DE635 ZBC741R Minox LX Watch U100 Z1485 GV-D300 A-207R Navigator E-starfam1 MDR-SA3000 PCV-RS402 DTB-P850Z CR 125 Capture NX Motorola V265 Doro 914C PB6200 YP5HY22CA SP2014N-CE MF6590 DSC-P150 Thinkpad R40E HQ8870 SL-PG360A 37LE2R KDL-52X3500 MT-42PZ15 KG240 KX-FPC161 VPL-CX20 FAX-2750 AVR-1601 T2288 GR-DVL805u-gr-dvl805 NV-VZ9 KDC-6024 CJ-N77CL 74-3333 50PC5DC Mustang-2001 Octopus II SPC-1738 Motorazr- V8 WF-701 FT-250 MIX800 SU-X999 PSR8000 HT-Z220 Iv-poster Back SRU520-87 FAX-LAB 630 VN-960PC Nokia MD-8 LP-S3000 GLC2500L Officejet 7110 Powerpod 620 21PT1820 Officejet 635 Mark-3 FR-3SB KV-S6045W TCH-M540 QY-70 UX180P STR-DE697 VSX-819H 5 0 Motorola W156 Z935X Nikkor 32LG40 A55-S326 SPH-M350 GE-940 SGH-A767 - E Review Asrock H55M SGH-F490 Nanocompressor LE46M87BD CLP-311 DVD-FP580 Pressure All-IN-ONE 1 0
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101