Desktop Dual-band Radio Controlled Clock with Melody Alarm and Backlight Model: RM926 User Manual

CONTENTS

Introduction.. 1 Product Overview.. 2 Front View... 2 Back View... 2 LCD Display... 3 Safety and Maintenance.. 3 Safety Precautions... 3 Caring for this Product.. 3 Getting Started.. 3 Unpacking the product.. 3 Batteries.. 3 About the Radio Reception.. 4 Checking Reception Status.. 4 Enabling / Disabling Radio Reception. 5 Backlight.. 5 Clock and Calendar.. 5 Setting the Clock and Calendar. 6 Alarm Function.. 7 Setting and Activating the Alarm. 7 Snooze Function / Deactivating the Alarm. 8 Resetting the Unit.. 8 Warnings.. 8 Caution... 9 Troubleshooting... 10
Specifications.. 11 About Oregon Scientific.. 11 EC-Declaration of Conformity. 11

INTRODUCTION

Thank you for selecting the Oregon Scientific Desktop Dual-band Radio Controlled Clock with Melody Alarm and Backlight RM926 as your product of choice. This device is designed to give you many years of reliable service, including the following conveniences: Radio-controlled calendar clock* 2-minute dual polyphonic melody alarm with 8-minute snooze function User-selectable month-day or day-month calendar Day-of-the-week selection in 5 languages State-of-the-art backlight technology
* Automatically synchronizes the current time and date when it is brought within range of the DCF-77 radio signal generated from Frankfurt, Germany (Continental Central Europe) or MSF-60 radio signal from Rugby (the U.K.). In addition to providing step-by-step instructions for this product, this manual contains important safety and care information. Read the manual thoroughly, and keep it in a safe place in case you need to refer to it.

2/3/05, 11:21 AM

RM926(EN4)

PRODUCT OVERVIEW

FRONT VIEW
5. MODE button Toggles display modes and confirms entry in clock setting mode 6. ALARM button Displays and sets time for the 2 alarms Repeat daily alarm(s) BLACK VIEW 1. Battery compartment Accommodates two UM-4 or AAA size batteries 2. EU / UK switch Switch to receive DCR-77 radio signal (Europe) or MSF-60 (U.K.) 3. RESET hole Resets unit by returning all settings to factory default values
1. SNOOZE / LIGHT button Enables snooze function when alarms go off Quick exit from settings (MODE and ALARM) Activates LCD backlight for 5 seconds 2. LCD Display and buttons 3. Increases or decreases the value of a clock or alarm setting Activates or deactivates radio signal reception 4. ALARM ON/OFF button Activates or deactivates alarms 2

RM926(EN4) 2

LCD DISPLAY
CARING FOR THIS PRODUCT To ensure you receive the maximum benefits from using this product, please observe the following guidelines. Cleaning Use a damp cloth. Do not clean with liquid cleaning agents, benzene, thinner, or aerosols. Repair Do not attempt to repair the product or modify the circuitry by yourself. Contact the retailer or a qualified repairman if the product requires servicing. Only use replacement parts that are recommended by the manufacturer. Do not scratch hard objects against the LCD display as this may cause damage.
1. 2. 3. 4. 5. 6. Low battery indicator Clock time Radio reception signal indicator Month-day / Day-month calendar Time-zone offset Dual alarms

GETTING STARTED

UNPACKING THE PRODUCT When you unpack your radio-controlled clock, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing. BATTERIES 2 pieces of UM-4 or AAA batteries are supplied with the product. To load the batteries: 1. Insert the batteries according to the + and polarities shown. 2. Press RESET.
SAFTY AND CARE INSTRUCTIONS
SAFTY PRECAUTIONS Please observe the following safety precautions when setting up and using this product. LCD panel The LCD panel is made of glass and may break if the unit is dropped or impacted. Heat sources Keep the product away from heat sources such as radiators, stoves, heaters, and other heat-generating products. Water and moisture Do not use the product in or near water or in high moisture areas such as a bathroom.

ABOUT RADIO RECEPTION

The product is designed to automatically synchronize its calendar clock once it is brought within range of the DCF77 radio signal from Frankfurt, Germany (Continental Europe) or MSF-60 from Rugby, England (U.K.). Pull down the battery compartment cover and slide the EU / UK switch to the appropriate area that you wish the unit to receive the radio signal. After installing the batteries, the full LCD display segment will activate for about 1 second, and then show the clock, date and reception signal indicator. Replace the batteries whenever the low battery icon is displayed, when the LCD is dim or does not illuminate when the power is on. Replace both batteries at the same time it is dangerous to mix old and new batteries. NOTE It is recommended that alkaline batteries be used for this product to improve the functionality of this product and extend battery life. NOTE Contact your local waste disposal authority for instructions on how to dispose of used batteries. Used batteries can be harmful to the environment, and should not be thrown out with household trash. Upon battery installation, the RM926 will start scanning for a radio signal. will blink according to the quality of the signal received. Generally, complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. The clock automatically searches for a radio signal at 1:00, 2:00, 3:00, 9:00, 15:00 and 21:00 daily. CHECKING RECEPTION STATUS When reception is complete, will stop blinking. The strength of the reception for the last full hour will be indicated. If the unit has successfully received a radio signal, the time and date will automatically adjust to the current time and date. If reception is not successful, you will need to set the clock manually. Initiating a search can be done at any time. To initiate a search, press and hold for about 3 seconds. When the RM926 is within range, its radiocontrol mechanism will override all manual settings. 4
RM926(EN4) 4 2/3/05, 11:21 AM
The unit displays different levels of reception that depends on signal strength. RADIO RECEPTION DESCRIPTION Strong Weak No reception No icon Radio reception is disabled and no reception will be initiated until it is enabled again
ENABLING / DISABLING RADIO RECEPTION If you wish to deactivate reception for reasons such as traveling outside the reception area (e.g. Asia, Africa or Americas), you may disable the reception. Subsequently, on return, you can enable it again. 1. To manually disable radio reception, press and hold for more than 3 seconds until disappears. 2. To enable radio reception, press and hold for more than 3 seconds. appears blinking and the unit will search for the radio signal automatically.

NOTE Providing that the radio frequency function is active, the clock will automatically scan for a radio signal. Reception can vary, and the clock may require several scanning attempts before a signal is successfully received. NOTE Reception can be affected by a number of factors. For best reception, place the device away from metal objects and electrical appliances. Other causes for signal interference include electrical transmission towers, steel reinforced construction, and metal siding. Reception is ideal when placed near a window.

BACKLIGHT

During normal clock display mode, press SNOOZE / LIGHT to enable the units backlight. The backlight is turned on for 5 seconds and if any other buttons are pressed during that time, it will remain on before automatically turning off 5 seconds after the last button is pressed.

CLOCK AND CALENDAR

The upper line of the units LCD displays the clock hour / minutes / seconds, AM/PM (for 12-hour display), as well as weekday, time-zone offset and language. The lower line displays the radio reception signal, calendar (datemonth or month-date), and dual alarm 1 and alarm 2 times. 5
Press MODE to toggle between 3 clock displays: Hour-Minute-Second (local time) Day-Month (of local time)
SETTING THE CLOCK AND CALENDAR Before you can manually set the clock and calendar, you must specify the current time-zone you live in and the time format (12- or 24-hour). 1. Press and hold MODE for 2 seconds to enter clock setting mode. The time-zone offset hour digits will blink. The default value of the offset hour is 00. When an offset hour has been set (e.g. +1), the time displayed will be the radio clock time plus 1 hour.
Hour-Minute-Day of the Week (local time) Day-Month (of local time)
Hour-Minute-Time zone offset Day-Month (of local time)
2. Press or to adjust the value (press and hold to adjust in fast increments) and press MODE to confirm. The next clock setting, 12- or 24-hour display format will blink. Press or and press MODE to confirm selection.
3. Repeat step 2 to adjust the remaining settings in the following order: Hour, Minute, Year, Month-day / Day-month format, Month, Day and Day-of-the-week language (English, German, French, Italian and Spanish) respectively. 6
RM926(EN4) 6 2/3/05, 11:21 AM

ALARM FUNCTION HOW TO S

The unit is equipped with dual 2-minute alarms and with 8-minute snooze function. For each alarm you may select from 5 polyphonic melodies (Circus, Carnival, Turkish, Jazz and Entertainer) plus a beeping alarm. SETTING AND ACTIVATING THE ALARM 1. From any clock display mode, press ALARM to view the alarm time on the lower line of the LCD. The Month-day / Day-month calendar mode changes to alarm display mode. : appears to indicate that no alarm time has been set. 2. Press to show the alarm time 6:00 (default setting) and. Press and hold ALARM for 2 seconds until the alarm hour value blinks.

NOTE Time-zone hour offset can be adjusted +/- 23 hours. The Zone time is the current clock time based on the radio reception signal, and local time is equal to the Zone time plus the Hour Offset.
3. Use or to adjust the each of the settings in the following order: hour, minute, melody, and alarm volume level (Lo / Hi), pressing ALARM each time to confirm and go to the next setting.
RM926(EN4) 7 2/3/05, 11:21 AM
4. To set alarm 2, repeat steps 2-3. 5. Once alarm 1 and alarm 2 have been set, and both appear on the LCD. Press ALARM to toggle between and to view the alarm times in clock display mode. SNOOZE FUNCTION / DEACTIVATING THE ALARM or will blink), press 1. When the alarm sounds ( SNOOZE/LIGHT to stop the alarm and activate the 8-minute snooze function. The alarm will sound again after 8 minutes. 2. Press and hold SNOOZE/LIGHT for 2 seconds or press ALARM to mute the snooze function. The alarm will automatically be set to sound again at the same time after 24 hours. The snooze function can also be disabled by entering any setting mode, if the second alarm sounds, or pressing. In alarm display mode, pressing activates / deactivates the alarm function when the respective alarm 1 or alarm 2 is selected.

RESETTING THE UNIT

You may need to occasionally reset the unit, for example, if you are travelling to different time-zones, if fresh batteries have been installed, or if the clock stops responding. To reset the unit at any time, pull down the battery compartment cover and insert a blunt stylus into the RESET hole to reset all values to the units original factory settings.

WARNINGS

To ensure you use your product correctly and safely, read these warnings and the entire user manual before using the product. The warnings given here provide important safety information and should be observed at all times. Do not attempt to repair the product yourself. Contact the retailer or our customer service department if it requires servicing. Take precautions when handling all battery types. They can cause injuries, burns, or property damage as a result of contact with conducting materials, heat, corrosive materials or explosives. Remove the batteries before storing the product for long periods of time. The product is a precision instrument. Never attempt to take this device apart. There is a serious danger of powerful electric shocks. Do not immerse the device in water.

RM926(EN4) 8

Do not, under any circumstances, touch the exposed electronic circuitry of the device as there is a danger of electric shock should it become exposed. Take special care when handling a damaged LCD display, as the liquid crystals can be harmful to your health. Do not use or store the device in locations that may adversely affect the product such as rain, snow, desert, and magnetic fields. Do not use this device in aircrafts or hospitals. The use of radio frequency products can cause malfunctions in the control devices of other equipment. Do not subject the product to impact or shock. Check all major functions when the device is unused for a long period of time. This is to ensure its full operation. Maintain a regular internal testing and cleaning of your device. When disposing of this product, do so in accordance with your local waste disposal regulations.

CAUTION

The contents of this manual is subject to change without further notice. Due to printing limitations, the displays shown in this manual may differ from the actual display. The manufacturer and its suppliers hold no responsibility to you or any other person for any damage expenses, lost profits, or any other claim that may result in using this product. The contents of this manual may not be reproduced without the permission of the manufacturer.
RM926(EN4) 9 2/3/05, 11:21 AM

TROUBLESHOOTING

Use this troubleshooting guide to help you remedy any difficulties you may be experiencing while using the product. Should any problem persist after you have checked these symptoms, consult your nearest Oregon Scientific dealer. PROBLEM SYMPTOM CHECK THIS Electromagnetic interference or objects are barring reception. Orientation or placement of unit is not optimum or out of range for receiving radio signal. Alarm is disabled. appears on the LCD. REMEDY Place the unit far away from PCs, phones, and other electronic equipment and near a windowsill. Wait for at least 24 hours. Turn on the alarm setting. Install new batteries.
Clock time not No radio signal correctly set. reception.
No alarm. LCD is dim or does not illuminate. Operation not normal.
Alarm does not sound. Battery may be running low on power.
Certain functions Device requires reset. do not perform correctly.
Reset the unit with a blunt stylus pressed against the RESET hole.
RM926(EN4) 10 2/3/05, 11:21 AM

SPECIFICATIONS

Radio reception DCF-77 radio signal from Frankfurt, Germany (Continental Europe) MSF-60 radio signal from Rugby, England (U.K.). Clock display 24-hour display with HH:MM:SS (DCF-77 version) 12-hour AM/FM display HH:MM:SS (MSF-60 version) Calendar Alarm Size Weight Power with
for our customer care department in case you need to reach us, as well as frequently asked questions and customer downloads. We hope you will find all the information you need on our website. However if you're in the U.S. and would like to contact the Oregon Scientific customer care department directly, please visit: www2.oregonscientific.com/service/ support OR call 949-608-2848. For international enquiries, please visit http://www2.oregonscientific.com/about/ international/default.asp.
DD/MM or MM/DD in 5 languages (E, D, F, I, S) 2-minute, dual alarm times 107 x 85 x 47 mm (H x W x D) 161 g without battery 2 pc. UM-4 (AAA) size batteries
EC-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Desktop Dual-band Radio Controlled Clock with Melody Alarm and Backlight model RM926 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children's electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact information 11

RM926(EN4) 11

COUNTRIES RTTE APPROVAL COMPLIED All EC countries, Switzerland CH and Norway N
2005 Oregon Scientific. All rights reserved. 086-003790-016
RM926(EN4) 12 2/3/05, 11:21 AM
Desktop Dual-band Radio Controlled Clock with Melody Alarm and Backlight Model: RM926

User Manual

RM926(EN4) 13 2/3/05, 11:21 AM