RECORDING YOUR EXERCISE SESSION
TIP To maximise the product lifetime we recommend waiting until the memory is nearly full before uploading the data to your PC.

CONNECTING TO YOUR PC

To connect to your PC insert the USB cable into your PC and attach to the Heart Rate Logger.
Universal Wireless Heart Rate Data Logger with PC Download Model: WM100 USER MANUAL EN

INTRODUCTION

Thank you for selecting this Oregon ScienticTM Heart Rate Logger for your sports and exercise needs. This product allows you to record your heart rate information from your chest belt and download it to your PC. Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specications and warnings you should know. IMPORTANT The measurement functions built into the WM100 are not meant to substitute professional measurement or industrial precision devices. Values produced by this unit should be considered as reasonable representations only. 1. 2. 3. 4. Set up your chest belt. Press BUTTON to power on the unit, and place it next to your chest belt to enable data reception. Attach the unit to your belt or place it in your pocket. Start exercising. To end data logging press and hold BUTTON for two seconds, until the LED ashes amber, then release.
To reset use a thin blunt object to press RESET.
NOTE The unit has a range of 10cm (4 in) during signal search and 80 cm (31.5 in) once a signal has been received. Before using for the rst time, please install the software and connect to your PC to upload time and date information.

PRECAUTIONS

This product is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions: Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. Do not clean the unit with abrasive or corrosive materials. Do not tamper with the units internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no user-serviceable parts. Only use fresh batteries as specied in the users instructions. Do not mix new and old batteries. Due to printing limitations, the displays shown in this manual may differ from the actual display. The contents of this manual may not be reproduced without the permission of the manufacturer. Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. NOTE The technical specications for this product and the contents of the user manual are subject to change without notice.

CONNECTING TO CHEST BELT

This product is compatible with heart rate chest belts transmitting digital or analogue signals on 5.3kHz (such as the chest belts supplied with the following models: SE102 / SE200 / SE211 / SE212 / SE232 / SE233). Please check your chest belt user manual for more information or visit www2.oregonscientic.com The unit will automatically search for a signal whenever you power ON the unit. The LED indicator will signal connection status. LED SIGNAL GREEN ashes quickly GREEN for 3 seconds AMBER for 3 seconds GREEN ashes slowly NOTE OFF. MEANING Searching for signal Signal found No signal found Device activated

OVERVIEW

FRONT VIEW
If no signal is found after 10 seconds the unit will power

LED indicator BUTTON

SIGNAL RECEPTION If you change or reset your chest belt during an exercise session, it may be necessary to search for the signal again. To force a signal search: Press and hold BUTTON for 4 seconds and release when unit is ON.

SPECIFICATIONS

TYPE LxWxH Reception range Signal reception Memory Power DESCRIPTION 46 x 46 x 17 mm (1.8 x 1.8 x 0.7 in) 10 cm (4 in) signal search 80 cm (31.5 in) signal found 5.3 kHz digital / analogue 30 hrs (at 2 sec intervals) 99 activity records 1 x CR2032 cell battery.

BACK VIEW

1. 2. 3. 4. Battery compartment Reset hole Belt clip USB cable connection socket
WARNING Signal interference in the environment due to electromagnetic disturbances may cause unstable or inaccurate heart rate readings. These may occur near high voltage power lines, trafc lights, overhead lines of electric railways, electric bus lines or trams, televisions, car motors, bike computers, some motor driven exercise equipment, cellular phones or when you walk through electric security gates.

LOGGING DATA

Every time the unit receives a signal it starts a new activity record and begins to store heart rate data. The LED indicator will ash green every 3 seconds to indicate data is being received. As soon as the unit stops receiving data or is turned off the activity record is ended. To end an activity record / turn unit OFF: 1. Press and hold BUTTON for 2 seconds. The LED will turn amber. 2. Release BUTTON to turn OFF. NOTE The unit will automatically deactivate if no heart rate is detected for 5 minutes, during this time the LED will continue to ash green. The unit will also deactivate if the battery is low or if the memory is full. MEMORY The data logger can record up to 30 hours at a storage interval of 2 seconds. Up to 99 activity records can be stored.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientic.com) to learn more about Oregon Scientic products such as digital cameras; MP3 players; childrens electronic learning products and games; projection clocks; health and tness gear; weather stations; and digital and conference phones. The website also includes contact information for our Customer Care department in case you need to reach us, as well as frequently asked questions and customer downloads. We hope you will nd all the information you need on our website, however if youre in the US and would like to contact the Oregon Scientic Customer Care department directly, please visit: http://www2.oregonscientic.com/service/default.asp OR Call 1-800-853-8883. For international inquiries, please visit: www2.oregonscientic.com/about/international.asp

GETTING STARTED

BATTERY The unit is supplied with a CR2032 cell battery. The LED indicator will ash red for two seconds before the unit turns off to indicate the battery is low. To change the battery: 1. Slide the belt clip off the unit. 2. Use a screwdriver to remove the battery compartment cover. 3. Replace the battery, matching the polarity (+ / -) as shown. 4. Reattach the battery compartment cover.
LED SIGNAL RED ashes slowly during exercise RED steady for 2 seconds
MEANING 90% of memory full Memory full, the unit will automatically turn OFF
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientic, declares that this Universal Wireless Heart Rate Data Logger (WM100) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientic Customer Service.

Memory records can be deleted manually or by using the SmartSync PC software supplied with this product. To delete using your PC, please refer to the software Help le. To manually delete all activity records: 1. Press and hold BUTTON for 4 seconds (when unit is OFF). The LED will ash amber. 2. Press again to clear memory. 3. The LED will turn green for 1 second to indicate records are deleted.
2006 Oregon Scientic. All rights reserved. 086L004464-037

WM100_M_USA_OP.indd 1

5/4/06 12:18:51 PM