TABLE OF CONTENTS

INTRODUCTION BATTERIES

PAGE 2 PAGES 3-6

CHARGERS

PAGES 7-10

GOLD MOUNTS

PAGES 11-14

STASIS ULTRALIGHT

PAGES 15

Table of Contents

PAGES 16-20

ACCESSORIES

PAGES 21-22

PRODUCT APPLICATION GUIDE

PAGE 23-26

WARRANTY/IMPORTANT TERMINOLOGY

PAGES 27-28

April 2005
A Professional selects his equipment knowing there are no second chances or second choices.
It all starts with the Gold Mount, the most widely used battery mounting system in the industry, allowing the use of a single system of batteries for virtually every piece of portable equipment used by videographers in the field. The same variety of batteries are interchangeable between different manufacturers cameras, field editors, monitors, test equipment and accessories. One Anton/Bauer charger can address this entire array of batteries and chemistries and can be upgraded to address future batteries as they are introduced. With this unique systems approach, Anton/Bauer customers employ the latest technology with the combination of batteries which suit their operating needs. today and in the future.

Introduction

LOGIC SERIES BATTERIES

INTERACTIVE

The key factors in selecting a professional video battery are size, weight,camera balance, runtime, service life, safety, reliability, compatibility, initial cost and cost to operate. No single battery size, type or chemistry can offer the ultimate in all of these characteristics in every shooting situation for every type of video operation. Thats why Anton/Bauer employs all three major chemistries nickel metal hydride, lithium ion and nickel cadmium. The entire range of price, size and capabilities of Anton/Bauer Logic Series and InterActive batteries can be mixed and matched on the same InterActive charger. This means that it is not necessary to compromise on a single size or type of battery. A high capacity HyTRON 120 can operate a camera and UltraLight combination for well over 2 hours. A lightweight Dionic battery can be charged on PowerChargers already in the field with a simple software chip update. A HyTRON 50 can be easily carried in a pocket for a spare. ProPac, TrimPac, HyTRON 120 all offer unparalled service life and carry the three year MAXX warranty.
RealTime display on all Digital Batteries.
The right battery is an Anton/Bauer system that allows you to work the way you need to, with unmatched features, performance, service life and value.

BATTERIES

Only Anton/Bauer Digital batteries communicate directly with every Anton/Bauer InterActive Charger, providing critical data which allows the charger to automatically create a charge routine for the specific operating characteristics of the battery. It is this proprietary InterActive communication which delivers superior reliability, performance, safety and service life. Anton/Bauer Digital batteries communicate their cell chemistry, serial number, date of manufacture, number of charge and discharge cycles, available capacity, learned capacity and cell temperature as determined by the internal diagnostic programs and sensor network. This data can be seen in each PowerCharger display providing instantaneous information about the battery.

Information available with Digital Batteries
The TITAN series offers InterActive charging in economical and versatile performance packages. The TITAN 70 is a combination Snap-On camera power supply and a single position charger. The TITAN TWIN simultaneously chargers any two Anton/Bauer batteries in a small lightweight package perfect for travel. The Titan TWQ offers simutaneous charging in a lightweight four position unit. TITAN T2 charger combines independent two channel simultaneous charging with a 70 watt DC output for operating virtually any camera from AC mains.
All Anton/Bauer chargers meet applicable safety and emissions standards including FCC and CE.
Charge LCD Positions Display QUAD 2702 Titan TWQ DUAL 2722 TITAN T2 TITAN TWIN TITAN 1 STD N/A STD N/A N/A N/A Camera DC Diagnostic Power Module (DMM) 70W N/A 70W 70W N/A 70W STD N/A STD N/A N/A N/A Type of Charge Sequential Simultaneous Simultaneous Simultaneous Simultaneous N/A Nominal Charge Time (Hours) Dionic 90 HyTRON 120 ProPac 3 5-1/3 5-1/2-1/2 6-1/2 2-1/2 2-1/1/2 3-1/3-1/1/2 1

Chargers

Dionic 160 3-1/2 8-1/2 3-3/4 4-1/2 8-1/2 4-1/2

HyTRON 50 Trimpac 2 1

*Sequential chargers will charge each battery in the same time shown one after another.
Simultaneous chargers will charge all batteries in the time shown at the same time.
POWERCHARGERS POWERCHARGER QUAD
The four position QUAD PowerCharger is the most advanced power system ever available. PowerCharger provides all of the advanced charging techniques of the Anton/Bauer InterActive 2000 system in a lightweight package the size of a notebook computer. Six full-time operating charge terminations - TCO, -V, temperature compensated VCO, DT/dt, CCO and FUL- (versus one for conventional chargers) deliver unmatched battery performance and reliability. Because all programming is contained on a single field replaceable chip, PowerCharger ensures future compatibility to new cell technologies and charging methods. The Quad PowerCharger will sequentially charge any combination of Anton/Bauer Gold Mount batteries (see BATTERY section). QUAD PowerChargers have an integral recessed carry handle to easily transport batteries and charger to and from location.

QUAD PowerCharger

The 70 watt QUAD 2702 features multi-function LCD, wide range mains input (90-250VAC 50/60 Hz) serial output port, a built in 2 amp DDM Diagnostic/Discharge Module and a high power 70 watt camera supply output which will power virtually all field equipment from AC mains, making it an all purpose power and battery analyzer system. 3 year MAXX Guarantee

QUAD 2702 PowerCharger includes DDM and 70 watt supply. 90-250VAC wide range input. Size: 8 X 12.5 X 2.75 (20.3 X 31.7 X 7 cm). Weight: 4.1 lbs. (1.8kg)

POWERCHARGER DUAL

The DUAL 2722 PowerCharger puts all the performance and advanced charging techniques of the Anton/Bauer InterActive 2000 PowerCharger into a compact two-position simultaneous charger. DUAL PowerCharger can charge any combination of Anton/Bauer Gold Mount batteries (see BATTERY section) employing six charge termination algorithms for unsurpassed safety and reliability. The small size and versatility of the DUAL PowerCharger makes it the ideal PowerCharger for professionals who travel often. The 70 watt DUAL 2722 features simultaneous charging, multi-function LCD, wide range mains input (90-250VAC 50/60 Hz) serial output port, a built in DDM Diagnostic/Discharge Module and a high power 70 watt camera supply output which will power virtually all field equipment from AC mains. 3 year MAXX Guarantee

DUAL 2722 PowerCharger

DUAL 2722 Simultaneous PowerCharger includes DDM and 70 watt supply. 90-250VAC wide range input. Size: 8 X 9.25 X 3.25 (20.3 X 23.5 X 8.2 cm). Weight: 2.85 lbs. (1.3kg)
Note: PowerChargers come with U.S. power cord. International power cord available seperately
POWERCHARGER CAMERA POWER CABLE
Camera Power XLR-4 Accessory Cable
10 ft / 3.04m cable connects to any PowerCharger or Titan T2 model to power camera / camcorder through standard camera 4-pin XLR input. Heavy duty wire gauge cable and high quality connectors minimize losses. See full listing of cables on page 22.

TITAN FAMILY TITAN TWQ

The TITAN TWQ is a four position simultaneous InterActive charger which delivers the ability to charge FOUR batteries at the same time, conveying the full complement of batteries up to 4 times faster than some sequencing type chargers. Focusing the full capability of the efficiency of the TITAN power architecture on battery charging, the TWQ uses all the charge termination techniques of the field proven InterActive system to service any of the Anton/Bauer Gold Mount batteries quickly, reliably, and safely. Simultaneous charging means that all batteries on the charger will be completed in the time shown on the chart on page 7 (e.g. four ProPac batteries will be charged TITAN TWQ in 3-1/2 hours) versus sequencing the batteries one at a time. This is the perfect charger for the operation which needs to cycle batteries often during the shooting day. Like all InterActive chargers, TWQ will address all Anton/Bauer batteries of any chemistry.

TITAN TWIN Two Position, 30 watt simultaneous InterActive battery charger.
90-250VAC 50/60 Hz. Size: 5.7 x 5 x 2.3 (14.5cm x 12.7cm x 5.8cm) Weight: 16.8oz. (476 grams). TITAN TWIN meets all applicable standards including CE and FCC requirements.

TITAN 70

A new approach to portable power, the TITAN 70 combines all the functionality of a one position InterActive charger with the convenience of a noise free lightweight camera mounted wide range AC mains adapter. TITAN 70 will power even the most power hungry high definition camera from any worldwide AC source. It also doubles as a full function InterActive Charger charging any Anton/Bauer Gold Mount Logic Series battery in 4-1/2 hours or less (see charge times pg. 7). Weighing only one pound (450 grams) the TITAN 70 is the perfect addition to any field camera as a lightweight mains adapter and a high performance charger. Meets all applicable regulatory requirements including CE and FCC.
TITAN 70 Gold Mount 70 watt charger/power supply.
90-250VAC 50/60 Hz wide range input. Output power in adaptor mode: 70 watts max., 10 amp output fuse. Size: 5-1/4 X 4 X 2-1/8 (13.2cm X 10.3cm X 5.6cm) Weight: 1 lb (450 grams)
GOLD MOUNT QUICK CHANGE SYSTEM
From the first one piece video camera to the advanced cameras of the day, the Anton/Bauer Snap-On system has been the standard of professional video. The patented Gold Mount is the third generation of this proprietary mounting system. The versatility of the mount combined with the advanced features and technology of Anton/Bauer batteries and chargers makes it the power format choice of video professionals, broadcasters and equipment manufacturers alike. New cameras from every manufacturer from high definition to mini-DV offer the InterActive viewfinder capability of the Anton/Bauer system available only with the Gold Mount. The pioneering Automatique light control circuitry is available only with Anton/Bauer Gold Mount equipped cameras. Many models, including every DVCPRO and new P2 solid state format cameras are delivered with the Anton/Bauer Gold Mount as standard factory equipment. New accessory equipment as well, such as hard drives, audio receivers and camera control systems also employ the Gold Mount for easy attachment to new cameras. To ensure the best performance from your camera, specify only Anton/Bauer Gold Mounts and Battery systems for your camera.

Gold Mount

GOLD MOUNT PROFESSIONAL FEATURES
PowerTap Receptacle - This original Anton/Bauer feature allows a camera mounted Ultralight, wireless micro phone, or other D.C.accessory to be powered from the camera battery. The integral cable of the popular Ultralight 2 includes a PowerTap plug that mates directly with the PowerTap receptacle in the Gold Mount. The PowerTap is internally fused for safety. INTERACTIVE Automatique - A special power circuit in all Sony DSR and SDH Gold Mounts, all DVC-PRO Gold Mounts and for most popular camera/camcorders allows an Ultralight to turn on/off automatically in sympathy with the VTR. This assures that every shot is free from the objectionable shadows caused by overhead lights, yet battery drain is kept to a minimum. InterActive Viewfinder Fuel Gauge - The Gold Mount includes the special InterActive contact that transmits the patented fuel computer signal from the DIGITAL battery to the viewfinder Fuel Gauge standard equipment in most new cameras/camcorders. Future Compatible - Unlike obsolete box style battery holders, the Gold Mount is fully compatible with the many different sizes and shapes of the new cell technologies under development. The Gold Mount will also allow old and new technology batteries to be used together interchangeably thus avoiding the inevitable sudden and costly transition to a new battery format. Universal Application - Gold Mount brackets can be easily installed on all portable equipment including monitors, scopes, microwave, audio and accessory hard drives. This versatility eliminates all the problems of having different and incompatible batteries/chargers in the field.

The PRODUCT APPLICATION GUIDE on pages 23-26 list the most popular cameras/camcorders and monitors with the applicable model Gold Mounts indicated in column 3. Wireless microphone receiver mounts not included with Gold Mount Brackets. See ACCESSORIES Section on page 21-22 for wireless receiver mounting options.
S O N Y W E D G E M O U N T A D SONY WEDGE MOUNT ADAPTER A P T E R
Anton/Bauer wedge mount adapters instantly convert the Sony wedge connector, providing
compatibility with all Gold Mount batteries. Although all Sony cameras feature a PowerTap connector, lighting is limited to either 25 or 50 watts (depending on model) due to a current limiter in the camera. The wedge mount adapters allow the unrestricted use of on-camera lighting with integral PowerTap connector, as well as access to the InterActive viewfinder Fuel Gauge and Automatique feature standard in all Sony camcorders.
QR-DSR mounts instantly to the DSR series and DV-CAM camcorders to adapt to Anton/Bauer batteries.

QR-DSR Front Back

QR-SDH mounts instantly to SX, Digital BetaCam, Hi-Definition and IMX camcorders to adapt to Anton/Bauer batteries.
QR-A200 adapts the wedge mount on Sony DNWA225/DNWA220/DNWA25/DSR70 portable SX editing machine to the Anton/Bauer Gold Mount. Because of the high current consumption of this machine, the HyTRON 120 is highly recommended. Can also be used to power Sony DSR 50 VTR and BVMD9 High Definition Monitor. QR-A200

UNIVERSAL GOLD MOUNTS

These Universal Gold Mount Kits include hardware for mounting on virtually any portable equipment that can be powered from 12-14 volts DC. Many video professionals have installed these mounts on waveform monitors, vector scopes, microwave transmitters/receivers, and even portable telephones. Powering an entire video operation from a single type battery/charger system is the ultimate convenience and economy.
QR-GOLD. This standard size Gold Mount measures 4.7H x 3.7W x 0.5D and can be

QRC-Gold QR-Gold

mounted in any convenient location on a piece of equipment.
QRC-GOLD. Compact Universal Gold Mount Kit with mounting hardware and wire terminals - This Gold Mount

is similar to the QR-GOLD above but is approximately 3/4 smaller (4.7H x 3.0W x 0.5D) which makes it ideal for mounting to small devices. Due to its smaller design, the QRC-GOLD must be mounted with its top edge flush with one edge of the equipment on which it is installed.
QR-CL - Gold Mount to 12 volt automobile adaptor. Allows the use of any Anton/Bauer Gold
Mount battery to power virtually any device - cellular phone, CD player and others - with the devices automobile cigarette lighter power adaptor. Gold Mount batteries will provide virtually unlimited power for these devices a valued feature in the field.
HOT SWAP ACCESSORY GOLD MOUNTS
QR-HOTSWAP mounts directly to the camera for true perpetual, continuous battery operation.
Unlike "stacking" batteries one behind the other, electronics in the QR-HS allow for true "hot swapping" allowing either battery to be changed at any time. The circuitry automatically combines the output of both Digital battery fuel gauges for accurate display in the cameras with InterActive viewfinder features. Used with two Dionic (see page 5) batteries, the lightweight (<13 oz/360g) QR-HS allows for 180 watt hours of capacity and seamless, truly perpetual, power. QR-HS can be used with any combination of Anton/Bauer Dionic or HyTRON 50 batteries ONLY. QR-HS comes in three mounting options:
QR-HOTSWAP - GM mounts directly to the Gold Mount. QR-HOTSWAP - VDSR mounts directly to V-mount format DSR types QR-HOTSWAP -VSDH for SX/HD, Digital-BETA V-mount format

QR-HOTSWAP-GM

QR-DVCPRO LPT PANASONIC LAPTOP EDITOR MOUNT
QR-DVCPRO LPT - An essential Gold Mount accessory exclusively designed for the Panasonic AJ-LT 75/95 DVCPRO portable field editor. Allows two Gold Mount Batteries (high capacity HyTRON 120 or ProPac 14 recommended) to power the editor continuously for up to 1 1/2 hours. Using Digital batteries with on board fuel gauge, depleted batteries can be switched one at a time to provide continuous operation.Low profile of the Gold Mount bracket allows the editor to fit into transport case without removing the bracket. Bracket is easily attached and detached with captive thumb screws.

QR-DVC10

UNIVERSAL APPLICATION GOLD MOUNT HOLDERS
UNIPAC. Video professionals unanimously consider the lightweight and rugged UniPac an essential accessory of every camera/camcorder package. The UniPac consists of an Anton/Bauer Gold Mount with integral belt loops and a 5 ft. power cable with a standard 4-pin XLR connector.The UniPac allows any Anton/Bauer Gold Mount battery to power any piece of portable 12-14 volt equipment with a standard 4-pin XLR DC input including the UNI PAC ULS. Thus camera/camcorder batteries can also be used to power most other portable video equipment including VCRs, monitors, test gear, etc. Additionally in cold climates or in tight spaces, the UniPac allows the battery to be removed from the rear of the camera/camcorder and worn on a belt or placed in some other appropriate place. QR-UNIV. The QR-UNIV consists of an Anton/Bauer Gold Mount and a 20 integral cable with 4 pin right angle XLR connector. Ideal for powering any portable video equipment with a 4 pin XLR DC input. Snap-On 30/13. Accepts two Pro Pac, TrimPac or HyTRON batteries of the same voltage. In the 13 volt mode the batteries are in parallel providing extended run times for any 12 volt portable device such as cameras, VTRs, or 12 volt lighting. Switch to the 30 volt mode and the two batteries are placed in series to provide high voltage power for 30 volt lighting applications such as HMI ballasts. Separate output connectors for 13 volt (standard 4-pin XLR) and 30 volt (2 pin). See Power cables pages 19 and 22. Features leather belt, quick release military buckle and Lexan control module with voltage indicator, dual voltage switch and 10 amp circuit breaker. Not for use SO-30/13 with 12 volt batteries. 100 watt maximum output. QBH-HD. The QBH-HD is a required accessory for the video/film dual voltage world of HD production. Using any 4 Gold Mount Batteries (the high power HyTron 120 is recommended), QBH-HD will output both 14.4 and 28.8 Volts simultaneously - bridging the power gap between HD video cameras and film accessories. The 28 volt output can handle HMI lighting ballasts as well as film cameras. QBH-HD is especially valuable in production environments where equipment needs to operate for long periods of time or for extending operating time of equipment at high current loads up to 10 amps. QBH-HD features 3 three 4 pin XLR outputs @ 14.4 volts and a single 2-pin Amphenol output @ 28.8 volts. 10 amp externally replaceable fuse. 12.3 x 4.6 x 2.lbs (31.37 x 11.81 x 6.73,.92 kg)

QBH-HD

NP/BP ADAPTER
Adapts NP or BP-90 style battery box to mount to equipment fitted with an Anton/Bauer Gold Mount. NP/BP box NOT included. NOT A CHARGE ADAPTOR-cannot be used to charge batteries.

NP/BP Adapter

SO-XLR ADAPTER
SO-XLR. Adapts any Gold Mount to accept a standard 4 pin XLR connector.

larger camcorders, dockable camera/VTR setups and for use with XL wedge and UL-2 wedge mounts (page 18). Comes standard with diffused glass.
UL2-28. Ultralight 2 camera mounted light with integral 28" PowerTap cable. For
ULTRALIGHT SPARE HEAD MODULES
To fully realize the versatility of the Ultralight System, it is highly recommended that additional head modules be part of every system. Spare head modules allow safe storage of bulbs and quick change to different wattages and beam patterns for every shooting situation.
UL2-HM. Quick change head module for UL2. With clear safety glass. UL2-HMD. Quick change head module for UL2. With diffusion glass.
ULTRADAYLIGHT HMI HEAD MODULE
With UltraDAYlight the high efficiency of HMI lighting can be added to any Ultralight system by simply changing head modules - a patented Ultralight exclusive.

UltraDAYlight

The UltraDAYlight head module fits any Ultralight base to instantly deliver 5600K light at less than half the power required of tungsten/halogen - without the need for dichroic adaptors. Uniquely designed to share power from camera battery using the PowerTap on every camera Gold Mount. Instantly change from daylight to tungsten and back by simply swapping head modules - no twisting, turning or handling of bulbs. And since the rugged Ultralight head modules house and protect the bulbs, they can be stored in the head module until the next use. The UltraDAYlight head module is a unit 25 watt bulb and ballast all in one. Perfect for daylight fill situations, the UltraDAYlight HMI can be converted to tungsten with the UL-GF and UL-GEL KIT (not included). UltraDAYlight also features a unique color temperature adjustment which allows the ballast to adjust the color temperature of the light, compensating for bulb variations and aging. Specifications: 5600K nominal color temperature. 350 footcandles at 3 (1m). 25 watt ballast.
UltraDAYlight head module. Size: 5.60 X 2.62 X 2.22(14.22 X 5.92 X 6.65cm) Weight: 13 oz. (380 g) ULTRALIGHT DIMMER. This UltraLight accessory allows the adjustment of light
output from 0-100%. It's microprocessor controlled PWM (pulse-width modulation) Dimmer circuit minimizes power loss and is designed to be used with any Ultralight in the field. With the push of a button, a low and a high output setting can be pre-programmed anywhere between 0 and 100%. With this feature quick and exact light settings can be established before the shot allowing for quick light transitions without fumbling or the need to "dial-it-in".UL-Dimmer fits any camera with a universal 1/4-20 or standard shoe type mount. Fitting underneath the light its innovative bevel design provides for additional down angle of the light while moving the light forward to avoid lens shadows.UL dimmer is fully compatible with the Automatique feature standard in most Gold Mounts and has an auto shut off in the case of a low voltage battery. (Not for use with UltraDAYlight head.) 4 5/8L x 1 7/16W x 1H, 5.6 oz (11.8L x 3.7W x 2.5H cm, 160 g)

ULTRALIGHT

ORIGINAL ULTRALIGHT
The original Ultralight is available in a single head with standard 5/8 mounting which makes it ideal for a wide variety of applications in addition to camera mounting. The original Ultralight also features a choice of power source: 12-14 volt and 30 volt. The integral 4-pin connector accepts a variety of power cables which must be ordered separately (see cables on page 22). The UL-S is available separately or in complete lighting kits.
ULS. Ultralight Single. Single base with 4 pin XLR and head module. Includes one AB-60 (25 watt 60flood) bulb. Comes standard with diffused glass.

ULTRALIGHT WEDGE MOUNTS

UL-2 Wedge. Provides the Ultralight 2 with an additional 20 of down
angle for shooting extreme close-up camera shots (Less than 3 feet or 1 meter). A universal mounting design allows quick adaptation to cameras using either 1/4-20 stud mount or shoe-type lighting mounts.
XL Wedge. Same as UL2 Wedge but 3-1/2 long to prevent any shadows from
microphone or lens shade in close up shooting situations.

XL Wedge

SATELLIGHT
The Satellight is an Ultralight 2 mated to a Gold Mount and can easily be stored in a pocket or camera case. When an additional light becomes necessary or desirable, the Satellight is instantly set up by snapping on an appropriate head module (bulb) and a spare camera battery. It is then a self-contained lighting unit that can be placed anywhere with the battery providing a stable base for the light.
Satellight - Includes Ultralight 2 with head module and BAB bulb (25 watt

Satellight

Flood). May be used with any Anton/Bauer Gold Mount battery. (HyTRON and Trimpac batteries recommended with 25 watt bulb only)
Satellight Adapter - Similar to above but without the Ultralight 2. Can be used with any existing light including Ultralight UL-S. BR-Stud 1/4 and PowerTap cable required except when mounting an Ultralight 2.
ULTRALIGHT PREMIER SHOOTERS PACKAGE
By popular request we have packaged the combination of Ultralight 2 and accessories most requested by the discriminating videographer into a single easy to store package. The Premier Shooters Package includes the most popular bulbs, a spare head module, the complete complement of filters as well as an assortment of gels. The Premier Shooters Package features eveything you need to customize the Ultralight to every shooting situation, from evening light to soft effects. Studio quality and flexibility in one package. Also available - Premier Shooters Package without UL2-20 or UL2-28.
Ultralight Premier Shooters Package includes:
One UL2-20 or UL2-28 Spare UL2-HM head module Focus Adapters UL-DF and UL-WA Dichroic adapter UL-DC (tungsten 3200K to 5600K converter) EYC 75 watt flood bulb UL-GF gel frame EYP 50 watt flood bulb UL-Gel Kit (see next page) BAB 25 watt spot bulb

style # CR-175, CR185, CR187 and UCR190. Size (inside dimensions): 4 x 3 x 1.25 (10 x 7.5 x 3.49cm) Note: Must be used in conjunction with an ABWMK-Kit
WRB-201 Wireless Receiver Box which will hold any wireless receiver similar to Lectrosonics style #UCR-201. Size (inside dimensions): 3.97 x 2.96 x 1.37 (10 x 7.5 x 3.49cm) Note: Must be used in conjunction with an ABWMK-Kit WRB-200 Wireless Receiver box which will hold any wireless receiver similar to Lectrosonics style # UCR-195,
UCR-195D, UCR-200, UCR-210, UCR-211, UCR-411, UCR-205 Size (inside dimensions): 4 x 3.5 x 1.37 (10.1 x 8.8 x 3.45cm) Note: Must be used in conjunction with an ABWMK-Kit
QR-WRB-25 Wireless receiver box fits between Gold Mount battery and camera to accept any 25-pin insert style wireless receivers (such as Sennheiser #EK3041-U, RAMSA #WX-RM770, TSP #WD-900R). Adapts camera to accept insert type wireless or provides an extra slot for additional receiver to cameras already equipped to accept one receiver. Adds only 1 to camera length. Receiver takes power from camera battery. Standard three pin audio out connector. Size: 3-13/16 x 5-3/4 x 2-3/8 (9.7 x 14.5 x 5.8cm)

QR-WRB-25

30/13 BATTERY BELT
30/13 Battery Belt The ultimate battery belt. Powers virtually all portable
equipment, including 30 volt lights, all 12v cameras and VTRs, and Anton/Bauers Ultralight Modular Lighting System. Rugged leather belt, Lexan battery modules, quick release buckle in an ergonomic design which can be worn around the waist or over the shoulder or bandolier style. Exclusive operating features: 30 volts, 4 AH or 13.5 volts, 8 AH switchable, charge indicator; input and output circuit protection; multiple charge sensors for 100% safe fast charging. 10 Amp circuit breaker. Built-in charger charges belt in 4 hours. Waist size: 32 to 48 adjustable. Wgt. 13 lbs.

POWER STRAP

Power Strap 13 Lightweight powerbelt designed for professional use with all portable
video recorders, cameras and low voltage lighting equipment. Constructed from rugged, lightweight 1000-denier Cordura with thermoplastic protective cell modules. 10 amp resettable circuit breaker. 5 lbs. (2.1 kg) 55 watt hours.

Power Strap 13

PSMC Power Strap Micro Charger. Overnight charger for Power Strap 13.
Specify 110/220 switchable or 220 volt. CE approved.

MOBILE CHARGING

This 300 watt unit converts any 12-14 volt DC source to either 115 or 230 volts A.C. Allows any Anton/Bauer charger to be powered from any vehicle battery or source with a 12 volt negative ground system. Includes an automatic cut-off circuit to prevent the vehicle battery from being depleted. Plugs into any standard cigarette lighter socket. Size: 1-1/2" x 4-1/2" x 6" (3.81 x 11.43 x 15.24cm), Wt.: 1.75 lbs. (.79 kg.) Note: 90 day warranty. Prowatt 300

or Stasis w/ CA-S

4 3/1/3/3/1/1/1/1/1/1/3/3/7 1/3/3/3/20
3 3/3/3/1/1/3/3/1/1/4 1/1/1/1/1/1/15 15
2 1/2/3/1/1/1/1/1/1/1/3/3/3 1/1/2 3/3/11 1/1/1/1/4
1 1/1/3/3/1/3/3/1/1/1/1/2 1/3/2 1/1/1/1/1/1/1/1/4
1 1/1/1/1/1/1/3/3/3/1/2/1/3/1/1/4 1/3/2/2/1/1/1/1/1/4
1 1/1/1/1/1/1/3/3/3/1/2/1/3/1/1/3/2/2/1/1/1/1/1/2
BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE
20" 20" 20" 20" 20" 6"/20" 20" 20" 20" 20" 20" 20" 28" 20" 6"/2" 6"/20" 6"/20" 6"/20" 6"/20" 6"/20" 28"
Product application guide
6"/20" 6"/20" 6"/20" 6"/20" 6"/20" 6"/20"

QR-Z1 QR-PD170/FX1

QR-PD170/FX1
IKEGAMI HL-60W w/DNR-20 HL-60W HL-57/59/59W HL-57/59/59W w/BVV31 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 QR-IKE BPT QR-IKE BPT QR-IKE BPT QR-SP200 QR-IKE BPT QR-SDH QR-SP400A QR-SDH QR-SP400A QR-IKE BPT QR-IKE BPT QR-IKE BPT QR-IKE BPT QR-IKE BPT QR-IKE BPT QR-IKE BPT 5 3/8 1/3/3/3/1/1/2/3/1/1/3/1/1/3/1/3/1/3/3/4 3/4 1/1/3/4 1/1/1/1/1/2/1/3/2/2/3/2/2/3/6 1/1/1 3/3/1/2 1/2 1/1/1/2 1/1/1/1/3/1/3/1/1/1/2/1/1/2/1/1/1/1/1/1/3/1/3/1/1/1/2/1/1/2/3 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE 28" 20 20" 28" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20"
HL-57/59/59W w/IR-D90/AJ-DHL-57/59/59W W/DNV5 HL-45 w/PVV3 HC-400/400W w/DNV5 HC-400/400W w/PVV3 HL-DV7W/HLDV5 HDL-V90 HL-V59/59W HL-V73/73W HL-V75W/77/77W/79W DNS-21W/201W DNS-33W JVC KY-19/27 w/BRS422 KY-D29 w/BVV5 KY-D29 w/BR-D27
14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 7.2
QR-27 QR-SP200 Q-X2 QR-27 QR-X3 Q-X2 Q-X2 Q-X2 QR-JVC Auto QR-JVC Digi Q-X2 Q-X2 QR-DV300

or Stasis w/ CA-J

5 3/3/1/1/5 1/1/20

3/1/3/6 15

2 3/1/2/1/1/2/2/11 1/4

3/1/1/1/9 1/4

1 1/1/1 3/1 1/1/1/1/1/1/1/1/4
1 1/1/3 N/A 1 3/1 1/1/1/1/1/1/1/1/2
BRSHOE BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE
20" 28" 28" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20"/6"
Product application guide 24
GY-X2B GY-X3 DY-70U DY-90/90W GY-DV500 GY-DV5000 GY-DV5100 GY-DV550 GY-DV700W GY-DV300
Power Consumption (watts) Max. Batt. Voltage (volts) GOLD MOUNT (battery mount) Battery RUN TIME Estimates(1) (hours) HyTron 120 Dionic 90 Pro Pac Lighting Mount(2) for UL S not req. for UL 2 Power Tap(3) cable length (inches) either UL 2/S

PANASONIC WV-F260/F575/F700 w/BVV5 WV-F260/F575/F700 w/PVV28 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 7.2 7.2 7.2 QR-SP200 QR-SP200 QR-27 Q-X2 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DP800 QR-DVX

or Stasis w/ CA-P

4 3/3/3/1/4 1/3/1/3/1/1/1/1/20

3 3/3 1/1/1/4 1/3/1/15

2 1/3/1/1/4 1/2 1/1/2 3/1/3/2/2/2/2/11 1/1/1/4
1 3/1/3/1/1/2 1/1/1/1/1/1/1/4
1 1/1/1/3 2/1/1/3/1/2 1/2/3/2/1/1/1/1/1/1/1/1/4
1 1/1/1/3 2/1/1/3/1/2/3/2/1/1/1/1/1/1/1/1/2
BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE BRSTUD 1/4 BRSHOE BRSTUD 1/4 BRSHOE BRSHOE BRSTUD 1/4 BRSHOE BRSHOE BRSHOE BRSHOE BRSHOE
28" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20" 20"/6" 20" 20"
WV-F260/F575/F700 w/BRSWV-F260/F575/F700 w/BR-DAG-DP800 AG-DVC200 AJ-D200/210/215 AJ-HDX400 AJ-D400/D700 AJ-D410 AJ-SDC615 AJ-D610WA/800/810 AJ-SPX800 AJ-D900W AJ-SDC915 AJ-SDX900 AJ-PD900W/910/910W AJ-HDC10/20/27/27F AJ-DVX100/100A/DVC80/30 AG-DVC 10/15 AG-DVC7/60 CANON GL-1/GL-2 XL-1/1S/8 8

QR-DVC10 QR-DVC10

7.2 7.2
Stasis w/ CA-C QR-XL-1/2C

11 1/1/4

9 1/1/4

7 1/1/4

6 1/1/2

BRSHOE BRSHOE

6" 20"

monitors

Power Consumption (watts) Max. Batt. Voltage (volts) GOLD MOUNT (battery mount) Battery RUN TIME Estimates(1) (hours) HyTron 120 Dionic 90 Pro Pac
IKEGAMI TM10 19RH TM9-1 TM 10/20SR HTM1003 JVC TM 1000SU TM 550U/TM 600PN TM 900SU TM-1010PN TM-910SU TM-L500PN 14.4 14.4 14.4 14.4 14.4 14.4 QR-DXCM3A QR-DXCM3A QR-DXCM3A QR-DXCM3A QR-DXCM3A QR-DXCM3A 4 1/1/1/1/3 3/1/1/1/1/2 3/1 3/2/2/2/2/1/1/1/1/1/1/1/1 1/1/1/1/1/14.4 14.4 14.4 14.4 QPY 10/19 QR-DXCM3A QR-DXCM3A QR-HTM1/1/1 2/1/1/1/1/3/2/1/1 1/1/2/1 2/3 1/1 2/3 1/2
PANASONIC BTS-100Y/950/1000N/1050 TC-7WMS1 BT LH900 SONY PVM 5041Q/PVM 6041Q 40 14.4 14.4 14.4 14.4 14.4 14.4 QR-SVM QR-SVM QR-SVM QR-SVM/QRA200 QR-SVM/QRA200 QR-SVTR/QR-A1/1 3/1/1/1/1/1/1/1/2 3/1/1/1/1/1/4 2/1/1/1/1/1/4 1/1/14.4 14.4 14.4 QR-DXCM3A QR-7LCD QR-DP1/1/1/1/1/1/2 1/1/1/1 1/2
PVM 8041Q/8044Q/9041Q/9044Q 40 PVM-8045Q/8042Q/12
PVM-9L2/9L3 BVM-D9 LMD650
SONY DSR-70 DSR-50/50P DNW-A25/A225/A220 SRW-1/SRPC-1 PDW-V14.4 14.4 14.4 14.4 14.4 QR-SVTR/QR-A1/1/1 1/1/1/2/1 1/1 3/1/3/4 3/4 2/1/2 3/4 2/3 1/3/4 1/2 1/2 1
QR-SVTR/QR-A2/3 QR-SVTR/QR-A200 QR-DSR QR-A1/2/1/3
1 - Run time estimates are based on the respective manufactures power specification. 2 - Required for Original Ultralight Single only. Not required for Ultralight 2. 3 - Denotes the hardwired cable length of Ultralight 2 or the separate Power Tap cable for Ultralight Single. 4 - IF QRSVTR cover must be removed. N/A - Not applicable due to manufactures maximum voltage specification.

manufacturers to describe (and often to make excuses for) a condition apparent only in poorly designed or mis-applied batteries. The term memory refers to a voltage depression in NiCd (and to a lesser degree in NiMH cells) which occurs when batteries are repeatedly shallow (partially) discharged and then charged on unsophisticated chargers.This term is most often associated with 12 volt NP and BP type batteries whose very design never allows them to be fully discharged on the camera (as the chart on the right shows). When the voltage depression appears, as it must since the 12 volt battery is VOLTS always shallow discharged even if discharged to the camera cutoff, the camera stops before the battery has given up all of its available energy. Therefore it 17 delivers a continually shortened runtime. Because the format of these batteries 16 14.4 Volt was to fit tightly in a box, they could not be redesigned to correct the problem. Camera Battery 15 13.2 Volt Falsely attributed to their NiCd chemistry, instead of poor battery design, the Camera Camera Voltage Battery Range 14 memory myth was born. Batteries somehow remembered how long they ran and then decided to repeat their poor performance. Of course the battery Volt Battery 12 Volt could be de-memorized with an expensive, time consuming, and life VTR-Type 12 Battery ) shortening discharger - which did the job that should have been done by the 11 camera. (The 12 volt design of these batteries also caused their poor cold 10 temperature performance).The high-voltage design of Anton/Bauer Logic Series 9 batteries, combined with the advanced charging technology of Anton/Bauer chargers, including the exclusive Lifesaver maintenance mode, has eliminated the myth of memory for Anton/Bauer customers for over 30 years.

(W/Adaptor

Important Terminology 28
Cell Technology - More accurately referred to as cell chemistry used in a battery (e.g. Nickel cadmium, nickel metal hydride,
lithium ion, silver zinc, etc). The type of chemistry used in a battery defines its size, weight, performance and service life. Anton/Bauer offers a wide range of size, weight and capacity batteries which employ only cells which have proven in lab and field testing to provide safe and reliable performance for the rigors of professional videography. Cell chemistries and cell sizes used in consumer products such as portable computers and cell phones typically cannot provide the reliability, performance, service life or ergonomics which are demanded by the professional video equipment and operations. Charging incompatible cell chemistries with conventional chargers leads to drastically shortened service life; or worse, could lead to catastrophic failure of the battery, including fire or explosion. Anton/Bauer employs only the cell chemistries and types which have proven themselves both in the lab and in the field to provide the reliability, longevity and safe performance that Anton/Bauer customers demand. All Anton/Bauer InterActive chargers automatically identify the cell technology used in the battery and adjust the voltage, current and charge routine to safely address appropriate new chemistries, such as the HyTRON and DIONIC system, as they are introduced.