Panasonic Broadcast

AK-HC3500 Menu Information

Menu operations

Basic setting menu operations

Displaying the menus

User menu

Entering the menu data

After accessing the item menus, enter the respective data.
1Turn the JOG dial to select the menu item to be set.

1Press the MENU switch.

The cameras USER menu screen now appears on the viewfinder or monitor.
2When the JOG dial is pressed, the setting of the item
indicated by the arrow flashes.
Turn the JOG dial to select the menu item.
3After having selected the item, press the JOG dial to

access that items menu.

Turn the JOG dial to change the setting.
When the JOG dial is pressed, the data is entered.
Bear in mind that if, in step 3, the MENU switch is set to OFF while the setting is flashing, the setting prior to the flashing will remain unchanged.
Entering the menu data (continued)
When the setting flashes one character at a time, press the JOG dial to move the flashing toward the right.
1When the JOG dial is pressed, flashing moves toward

the right.

When the JOG dial is now pressed, the data is entered.
Setting menu configuration

Hierarchical menus

USER MENU
Table of adjustment setting ranges

Operation

Menu VF Setting1 Item Side Modu SW Adjustment setting range OFF, ON Initial value OFF Items recorded on SD memory cards No switching from the SD memory card to the camera settings possible while the buildup unit is connected. No switching from the SD memory card to the camera settings possible while the buildup unit is connected. No switching from the SD memory card to the camera settings possible while the buildup unit is connected.

Side Modu LVL

0 to 31
Zone Mark Safety Mark1 Safety Area1 Safety Mark2 Safety Area2 Center Mark Center Mark SEL Line Width Marker Level VF DTL
OFF, 4:3, 13:9, 14:9, 15:9, 16:9 16:9, 15:9, 14:9, 13:9, 4:3, OFF 80 %, 90 %, 93 %, 100 % 16:9, 15:9, 14:9, 13:9, 4:3, OFF 80 %, 90 %, 93 %, 100 % OFF, ON 1 to to %, 75 %, 50 % 0 to 23 12.4M, 12.5M, 12.7M, 12.9M, 13.0M, 13.3M, 13.6M, 13.9M, 14.2M, 14.6M, 15.0M, 15.5M, 16.1M, 16.7M, 17.3M, 18.0M, 18.6M, 18.8M, 19.0M, 19.2M, 19.5M, 19.9M, 20.3M, 20.9M, 21.5M, 22.4M, 23.6M, 25.4M, 28.6M, 37.1M 0 to to 63 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 0 to to 63 2.0M, 2.3M, 2.7M, 3.4M, 4.5M, 6.8M, 13M 0 to to 63 OFF, ON ADJ, 1, 2, 1+to to to to 255 BOX, CROSS MEM1, MEM2 NO?, YES? OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON, AUTO LOW, NORM OFF, ON OFF, ON
OFF OFF 93 % OFF 80 % OFF 100 % 10

VF Setting2

HD Peak FREQ

Cursor

VF Display1

VF Display2

Setting1
HD Offset Gain HD Crisp D1 Peak FREQ D1 Offset Gain D1 Crisp VBS Peak FREQ VBS Offset Gain VBS Crisp Cursor Cursor Memory H Position V Position Width Height BOX/CROSS Store Memory EXECUTE F Number Zoom Focus Extender MONI OUT Filter M Gain Shutter 5600K Audio Level OPT Level RET Select Status Status(AUTO) Field Rate Voltage WFM (*1) White CH FAN Power FAN Mode CALL+R_TALLY CALL+T_TALLY PinP Mode
6.8M 6.8M OFF ADJ BOX MEM1 NO? OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON NORM OFF OFF

*1: aveforms are displayed as a single line at the center of the screen. They appear at the bottom right when the W aspect ratio is set to 16:9, but when an aspect ratio of 4:3 is set on the viewfinder or when the side panel mode is selected by the down-converter, the waveform display will be cut off in part.
Menu Setting1 Item HD-SDI2 OUT HD-SDI2 Power AUX I/O TRUNK1 TRUNK2 5600K HND GRIP RET HND GRIP PTT HND Lens VTR HND Lens RET STD Lens RET1 STD Lens RET2 EXT RET 1 EXT RET 2 EXT RET 3 RET1 ID RET2 ID RET3 ID RET4 ID Gain SW LOW Gain SW MID Gain SW HIGH ID Character User SW1 User SW2 User SW3 User B/U Back Light RET Mode Lens I/F B/U Lens Rear ROP VR Gamma Off Shutter Extender MONI OUT FAN Off Master Gain Black Gamma VF FAN Speed Peak Slice Peak FREQ INC1 MIC Type INC1 MIC Gain INC1 MIC Power INC1 Side Tone INC1 PGM MIX INC1 ENG/PROD INC1 to CCU INC2 MIC Type INC2 MIC Gain INC2 MIC Power INC2 Side Tone INC2 PGM MIX INC2 ENG/PROD CRANE MIC Gain CRANE Side Tone CRANE ENG/PROD CRANE to CCU MIC1 Gain MIC1 AMP MIC2 Gain MIC2 AMP Adjustment setting range MAIN, VF, RET ACTIVE, SAVE RET Y IN, PMT2 OUT, VBS OUT, D1 OUT RS422, RS232C RS422, RS232C OFF, ON A, B, PTT PTT, A, B VTR, A, B, PTT A, B A, B A, B A, B A, B A, B Enables a name (5 characters) to be set. Enables a name (5 characters) to be set. Enables a name (5 characters) to be set. Enables a name (5 characters) to be set. 6 dB to 36 dB (in 3 dB increments) 6 dB to 36 dB (in 3 dB increments) 6 dB to 36 dB (in 3 dB increments) Enables a name (10 characters) to be set. A, B, PTT, DISP, MARK OFF (*2) A, B, PTT, DISP, MARK OFF A, B, PTT, DISP, MARK OFF A, B, PTT, DISP, MARK OFF, LENS EXT 1 to 70 NORM, TOGGLE, SEQ. Analog, Serial PORTABLE, BOX CAM, CCU OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON NORM, LOW OFF, LOW, MID, HIGH 8 MHz, 15 MHz DYN, ECM, CBN 12 dB to +12 dB (in 3 dB increments) OFF, ON OFF, 36 dB to 0 dB (in 3 dB increments) OFF, ON ENG, PROD OFF, ON DYN, ECM, CBN 12 dB to +12 dB (in 3 dB increments) OFF, ON OFF, 36 dB to 0 dB (in 3 dB increments) OFF, ON ENG, PROD 12 dB to +12 dB (in 3 dB increments) OFF, 36 dB to 0 dB (in 3 dB increments) ENG, PROD OFF, ON 20 dB, 40 dB, 60 dB 20 dB to 20 dB (in 1 dB increments) 20 dB, 40 dB, 60 dB 20 dB to 20 dB (in 1 dB increments) Initial value VF ACTIVE RET Y IN RS422 RS422 OFF A PTT B A A B A B B RET1 RET2 RET3 RETdB 6 dB 12 dB A PTT PTT PTT 20 NORM Analog BOX CAM OFF OFF OFF OFF OFF OFF OFF NORM OFF 8 MHz DYN 0 dB OFF OFF ON ENG ON DYN 0 dB OFF OFF ON ENG 0 dB OFF ENG ON 20 dB 0 dB 20 dB 0 dB Items recorded on SD memory cards

Setting2

Setting3

Setting4

7"VF

INCOM Set.1

INCOM Set.2

MIC Gain
*2: ISP: D At the DISP setting, the character display is forcibly set to OFF while the user switch is pressed. MARK OFF: the MARK OFF setting, ZONE, SAFETY, CURSOR, CENTER and WFM are forcibly set to OFF while At the user switch is pressed.

Painting

Menu Setting SW Item Flare Black Gamma Gamma Knee White Clip Matrix Preset Matrix DTL Skin Tone DTL DRS SW (*3) Correct H SAW R/G/B H PARA R/G/B V SAW R/G/B V PARA R/G/B AUTO V.SAW PED M PED R PED B Flare Flare R Flare G Flare B Gain R Gain G Gain B Correct H SAW R/G/B H PARA R/G/B V SAW R/G/B V PARA R/G/B Gamma Gamma M Gamma R Gamma B Black Gamma Black Gamma M Black Gamma R Black Gamma B DRS SW Effect Depth Initial Gain Knee Knee Point M Knee Point R Knee Point B Knee Slope M Knee Slope R Knee Slope B White Clip White Clip M White Clip R White Clip B Adjustment setting range OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON OFF, ON NORM, EBU, NTSC OFF, ON OFF, ON OFF, ON OFF, ON 100 to +to +to +to +to +to +to +800 OFF, ON 100 to +to +to +to +to +to +800 OFF, ON 100 to +to +to +to +100 OFF, ON 0.600 to 0.to +to +75 OFF, ON 32 to +to +to +20 OFF, ON 1 to 5 4.0, 4.5, 5.0 OFF, ON 110 % to 80 % 20 to +to +to to +to +31 OFF, ON 109 % to 80 % 15 % to +15 % 15 % to +15 % Initial value ON OFF ON OFF OFF OFF NORM ON OFF OFF ON 0 ON ON ON 0.0 OFF 0 OFF 5 4.5 OFF 95 % 0 OFF 109 % 0 0

BlackShading

Black/Gain

White SHD

Knee/W.Clip
*3: The image will be disturbed for an instant when the DRS function setting is changed.
Menu Linear Matrix Item Matrix Linear 12axes R-G R-B G-R G-B B-R B-G Matrix Linear 12axes G Satu G Phase G_Cy Satu G_Cy Phase Cy Satu Cy Phase Cy_B Satu Cy_B Phase B Satu B Phase B_Mg Satu B_Mg Phase Matrix Linear 12axes Mg Satu Mg Phase Mg_R Satu Mg_R Phase R Satu R Phase R_Ye Satu R_Ye Phase Ye Satu Ye Phase Ye_G Satu Ye_G Phase V DTL H DTL Crisp Peak FREQ Level Dep. Dark DTL Corner DTL DTL_Source DTL_Clip+ DTL_Clip DTL_Knee+ DTL_Knee Knee DTL Adjustment setting range OFF, ON OFF, A, B OFF, A, B 31 to +to +to +to +to +to +31 OFF, ON OFF, A, B OFF, A, B 128 to +to +to +to +to +to +to +to +to +to +to +to +127 OFF, ON OFF, A, B OFF, A, B 128 to +to +to +to +to +to +to +to +to +to +to +to +to to to 63 12.4 MHz to 37.1 MHz 0 % to 30 % 0 to to 31 2G+B+R, R, B, R+B, G, R+G, G+B, R+G+B 0 to to to to to 39 Initial value OFF A A OFF A A OFF A A 10 23.6 MHz 0% R+G 0

Color Correct1

Color Correct2

Detail1

Detail2
Menu Skin Tone Detail1 Item Skin Tone DTL Skin Tone Get Skin Tone Get MEM Select Cursor H Cursor V Cursor ZEBRA Effect MEM Skin Tone DTL MEM A Skin Tone Crisp Phase Width Saturation MEM B Skin Tone Crisp Phase Width Saturation Adjustment setting range OFF, ON EXECUTE (execution items) CANCEL (execution items) A, B OFF, ON 1 to to 540 OFF, A, B, A+B A, B, A+B OFF, ON 63 to 0 to +to to to to 0 to +to to to 255 Initial value OFF EXECUTE CANCEL A OFF OFF A+B OFF 0 0

Skin Tone Detail2

Maintenance
Menu Date / Time (*4) Item Present Adjust 12H, 24H Date YY Date MM Date DD Date aaa Time HH Time NN Time SS Set Exe Reset Mode File No. EXECUTE Mode File No Lens File EXECUTE Mode File No File Name EXECUTE Gain R Gain G Gain B Flare R Flare G Flare B W H SAW R/G/B W H PARA R/G/B W V SAW R/G/B W V PARA R/G/B Store? Cancel? Auto Iris Window Select Iris Level Peak Ratio A.Iris Range A.Iris Speed LensExtComp.SW LensExtComp.LVL Adjustment setting range (Display item) NO?, YES? 24H, 12H Year Month Day Day of week Hours Minutes Seconds NO?, YES? NO?, YES? FORMAT, LOAD, STORE 1 to 8 NO?, YES? LOAD, STORE OFF, 1 to 8 (when LOAD is selected) 1 to 8 (when STORE is selected) NO?, YES? LOAD, STORE OFF, 01 to 16 (when LOAD is selected) 01 to 16 (when STORE is selected) Enables a name (8 characters) to be set. NO?, YES? 100 to +to +to +to +to +to +to +to +to +to +100 NO?, YES? NO?, YES? OFF, ON 1 to 8 (*6) 0 to to 100 NORMAL, (3/4), (2/4), (1/4) 1 to 25 NORMAL, ON 40 to +40 Initial value (Current date/time) NO? 12H (Current year) (Current month) (Current day) (Current day of week) (Current hours) (Current minutes) (Current seconds) NO? NO? LOAD 1 NO? LOAD 1 NO? LOAD 01 (Filename) NO? NO? NO? OFF 60 NORMAL 15 NORMAL 0

SD Card

Scene File

Lens Edit

Option (*5) Iris Cont.
*4: f the date and time have not been set properly, the time may not be updated properly. I The clock has an error which may cause it to gain or lose up to one minute per month. *5: The menu displayed differs depending on the type of option board installed. *6: The types of windows which can be selected are as shown in the figure below. 3 4
Menu CINE Gamma Item Cinema Gamma SW Cinema Gamma SEL Black STR LVL Dynamic LVL Knee Point Knee Slope ASU Filter Setup Mode REF File M-PED Target ASU Execute Tally Guard H Phase Coarse H Phase Fine SD-HD Phase CRS SD-HD Phase Fine HD-SD Phase CRS HD-SD Phase Fine SD-HD V Phase SC Coarse SC Fine SC-H Coarse SC-H Fine Shutter SYNCHRO Mode Adjustment setting range OFF, ON VIDEO_REC, FILM_REC 0 to +%, 300 %, 400 %, 500 % +30 to +%, 200 %, 250 %, 300 %, 350 %, 400 %, 450%, 500 %, 550 %, 600 % REF, CURRENT FULL (standard), EASY (simplified) Factory, User1, User2, User3 0.0 % to 7.5 % (execution items) OFF, ON 60 to +60 (during HD signal genlock) 120 to +120 (during SD signal genlock) 45 to +to +to +to +to +99 HD, SD 0 to to +to to +255 OFF, ON OFF, ON Fixed at SHUTTER When SHUTTER is ON, SYNCHRO is OFF 100/125/250/500/1000/2000 When SHUTTER is ON, SYNCHRO is ON 60.9 Hz to 99.8 Hz Speed When SHUTTER is OFF, SYNCHRO is ON 60.9 Hz to 99.8 Hz When SHUTTER is OFF, SYNCHRO is OFF 100/125/250/500/1000/2000 (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) (Display item) 50i, 59.94i When SHUTTER is OFF, SYNCHRO is ON: 60.9 When SHUTTER is OFF, SYNCHRO is OFF: 100 (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) (Current value) 59.94i Initial value OFF VIDEO_REC +% +% REF FULL Factory 5.0 % READY? OFF SD OFF OFF SHUTTER When SHUTTER is ON, SYNCHRO is OFF: 100 When SHUTTER is ON, SYNCHRO is ON: 60.9

Tally Guard G/L

Shutter

ROM Version PLD Version

Format
CAM B, U (*7) TG SHD MEM RET VF AUX CAMSYS OPTION Present Format
*7: This is displayed when the buildup unit is connected.
SD memory card operations
These operations are performed on the SD Card page on the Maintenance menu. The VF display settings and camera function settings on the Operation menu can be recorded on the SD memory card. For details on what items are stored in the memory of the SD memory card, refer to Table of the adjustment setting ranges.
Mode: SD memory card operation mode setting Select the SD memory card operation here. Setting range: FORMAT, LOAD, STORE FILE No.: File selection Select the number of the file to be loaded or stored here. Setting range: 1 to 8 he files on the SD memory card have filenames which range from 3500cm01.dat for File No.1 to T 3500cm08.dat for File No.8. The SD memory card may not work properly if files have been edited using a personal computer or other device. EXECUTE The item set in Mode is executed here. When the arrow cursor () is moved to EXECUTE and the JOG dial button is pressed, No? appears. When the dial button is turned, Yes? appears. When the dial button is pressed while Yes? is displayed, the selected operation is executed. Conversely, when it is pressed while No? is displayed, the selected operation is canceled.

Panasonic Broadcast

AK-HC3500 Mechanical Parts
Note: 1. 2. 3. 4. 5. *Be sure to make your orders of replacement parts according to this list. Unless otherwise specified, all resistors are in OHMS, K=1,000 OHMS, all capacitors are in MICROFARADS (F), P=F, The P.C.Board unit marked with " " shown below the main assembled parts. The parts marked with E on the exploded view show the electric parts. IMPORTANT SAFETY NOTICE Components identified with the mark have the special characteristics for safety. When replacing any of these components, use only the same type. The marking (RTL) indicates the retention time is limited for this item. After the discontinuation of this assembly in production, it will no longer be available. "M" in Remark column indicates needed in the periodical maintenance.

CONTENTS

CHASSIS FRAME ASSEMBLY....PRT-1 FRONT ASSEMBLY....PRT-3 TOP CASE ASSEMBLY....PRT-5. BOTTOM CASE (1) ASSEMBLY....PRT-7 BOTTOM CASE (2) ASSEMBLY....PRT-9 REAR CASE (1) ASSEMBLY....PRT-11 REAR CASE (2) ASSEMBLY....PRT-13 HANDLE ASSEMBLY....PRT-15 SIDE CASE ASSEMBLY....PRT-17 PACKAGING PARTS ASSEMBLY (P)...PRT-19. PACKAGING PARTS ASSEMBLY (E/MC)...PRT-20

CHASSIS FRAME ASSEMBLY

SIDE CASE (L) ASSEMBLY (See PRT-17)
EEE8 TOP CASE ASSEMBLY (See PRT-5) E104 HANDLE ASSEMBLY (See PRT-15) REAR CASE (1) ASSEMBLY (See PRT-11)
119 FRONT ASSEMBLY (See PRT-3) 127
BOTTOM CASE (1) ASSEMBLY (See PRT-7)
E16 E15 E14 E13 E12 E11 E127
SIDE CASE (R) ASSEMBLY (See PRT-17)

Ref. No.

E7 E8 E9 E10 E11 E12 E13 E14 E15 E16 E17 E18

Part No.

ASU2615 VSCB0071 BSU2615 VMTB0137 VGQB0143 ASU2607 VSCB0075 VGPB0092 XQN26+A6FJK XSB3+6FJK XSB4+8FJK XYN26+J5FN XYN3+J6FN VQLB0098 VEEB0237-1 VEEB0239 VEEB0240 VEEB0345 VEEB0242 VEEB0243 VEEB0245 VEEB0246-2 VEEB0247-2 VEEB0248 VEEB0249 VEEB0252-2 VEEB0253 VEEB0342-2 VEEB0343-2 VEEB0258 VEEB0259 VEEB0260 VEEB0261-1 VEEB0262 VEEB0263 VEEB0264-2 VEEB0265 VEEB0266 VEEB0267 VEEB0268-1 VEEB0269 VEEB0270 VEEB0271-1 VEEB0272-1 VEEB0273 VEEB0274-1 VEEB0275-1 VEEB0277 VEEB0278 VEEB0279-1 VEEB0361 VEEB0281 VEEB0282-1 VEEB0283 VEEB0284 VEEB0387 S1VEPB0469A S1VEPB0470A S1VEPB0471A S1VEPB0472A S1VEPB0473A S1VEPB0475A S1VEPB0476A S1VEPB0477A S1VEPB0478A S1VEPB0479A S1VEPB0480A S1VEPB0481A
Part Name & Description Pcs
SPACER UNIT P.C.B. SHIELD SPACER COVER CUSHION TOP COVER SPACER SHIELD SHEET POWER P.C.B. PANEL SCREW SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER BATTERY LABEL CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE DPRO P.C.BOARD AD P.C.BOARD SDI P.C.BOARD CAMSYS P.C.BOARD AUX P.C.BOARD VDA P.C.BOARD AUDIO CONV P.C.BOARD AUDIO P.C.BOARD REGA P.C.BOARD REGB P.C.BOARD MOTHER P.C.BOARD POWER P.C.BOARD (MC)

Remarks

1 SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-SEE PAGE BLK-1 (RTL) (RTL) (RTL) (RTL) (RTL) (RTL) (RTL) (RTL) (RTL) (RTL) (RTL) (RTL)

FRONT ASSEMBLY

E1 E127 353

4 EE4 EE6 5

E1 E2 E3 E4 E5 E6
VEQB3395 VMPB0100 VMPB0101 ASU2607 VGMB0092 VMGB0064 VMGB0056 VMGB0054 VMX1558 VMTB0055-1 VJF1256 VSCB0068-1 VSCB0067-1 VMTB0144 VYQB0036
OPTICAL UNIT OPT PCB ANGLE (TOP) OPT PCB ANGLE (BOTTOM) SPACER FRONT CASE SHIELD TUBE (D) SHIELD TUBE (C) SHIELD TUBE (A) NYLON WASHER SOFT GASKET CORD CLAMP SHIELD CASE (PREAMP) SHIELD CASE (OPTICAL) GASKET OPTICAL LPF UNIT 1 (RTL) 1 (RTL) 1 (RTL) 1 (RTL) 1 (RTL) 1 (RTL)
YWE5100EM01A STANDARD SCREW
S1B9BA0542AN OPTICAL ASS'Y XSB2+4FJK XSB3+8FJK XYN2+J4FN XYN26+J5FN XQS2+A4FJK VEEB0283 VEEB0284 S1VEPB0463A S1VEPB0464A S1VEPB0465A S1VEPB0466A S1VEPB0467A S1VEPB0468A SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER SCREW CABLE CABLE SENSOR P.C.BOARD DRIVE P.C.BOARD PREAMP P.C.BOARD TG P.C.BOARD SHD P.C.BOARD DSUB P.C.BOARD

TOP CASE ASSEMBLY

(P) SERIAL NO. LABEL

(MC) SERIAL NO. LABEL

(E) SERIAL NO. LABEL
VGMB0093 V5RA0281A4 VMGB0046 VGPB0090 VMTB0134 VGPB0089 VMAB0192 K1ZZ00000314 VMG0948 VMAB0178 VGQB0142 XQN2+A8FJK XQN26+A6FN XQN26+A6FJK XSS2+4FN XSB4+8FJK XYN26+J5FN XYN26+J6FJK VGNB0216-2 VGNB0217-1 VGNB0218-1
TOP CASE ROTARY SWITCH KNOB RUBBER BUTTON TOP SWITCH PANEL KNOB CUSHION UNIT PANEL OPTION MOUNTING ANGLE DUST CAP EVF SEALING PACKING EVF CN MOUNTING ANGLE P.C.B. GUIDE RAIL SCREW SCREW SCREW SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER MAIN LABEL MAIN LABEL MAIN LABEL 1 (P) 1 (MC) 1 (E) 1 (MC) 1 (RTL)
3PD003497AAA PRODUCT DATE LABEL VEEB0267 VEEB0270 S1VEPB0519A CABLE CABLE MONI SEL P.C.BOARD

BOTTOM CASE (1) ASSEMBLY

EBOTTOM CASE (2) ASSEMBLY (See PRT-9) 327 E127 18

134 23

127 E26 28

201 31

327 E24 E25 E26 E30
VGMB0101 VMG1317 VGU8346 VMX3299 VMP4850 VKF2485 VMSB0028 VMC1210-1 VGQ3417 VMT0738 VMGB0062 VGU6511 VGU9861 VMGB0064 VMAB0179 K5JYYB000073 VMAB0185 VMAB0197 MN1 VMLB0053 VGQB0144 VMXB0064 VMTB0133 YWV52-BM01A VMBB0019 VGQ3418 VMAB0181 VMAB0183 VGPB0088 VMAB0182 VGFB0014 VMSB0029 VMC1209 VMGB0062 VGUB0032 YWV52-BM01A XQN26+A6FJK XSB2+4FJK XSB3+6FJK XYN2+J6FN XYN26+J4FN XYN26+J5FN XXE2D4FJK XWE3FN VQLB0260 VEEB0264-2 S1VEPB0489A S1VEPB0492A S1VEPB0493A S1VEPB0517A
FRONT SWITCH CASE MENU SEALING PACKING RUBBER BUTTON RUBBER BUTTON SPACER FRONT LID ANGLE FRONT LID SOFT BREAK PIN FRONT LID SPRING PUSH BUTTON HOLDER TOGGLE SW SEALING PACKING TOGGLE SWITCH SHEET PUSH BUTTON MENU KNOB SHIELD TUBE (D) BREAKER MOUNTING ANGLE BRAKER BU CN MOUNTING ANGLE PROTECT COVER BUTTON SLIDE LEVER SLIDE GEAR (A) SLIDER SHOULDER PAD SPECIAL SCREW SLIDER SPRING PUSH BUTTON HOLDER SIDE SW MOUNTING ANGLE SD P.C.B. MOUNTING ANGLE SIDE SWITCH CASE SD LID MOUNTING ANGLE SD CARD LID SD LID SHAFT SD LID SPRING TOGGLE SWITCH SHEET PUSH BUTTON SPECIAL SCREW SCREW SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER SCREW w/ WASHER SET SCREW WASHER LABEL SET CABLE FRONT TOGGLE P.C.BOARD FRONT SW P.C.BOARD SD CARD P.C.BOARD SIDE TOGGLE P.C.BOARD (RTL) 1 (RTL) 1 (RTL) 1 (RTL)

XQN26+A12FJK SCREW

BOTTOM CASE (2) ASSEMBLY

335 15

335 E21
VGMB0098 VGM1826 VGMB0094 VMGB0047 VMP6370 VGQB0145 VGMB0100 VMBB0020 VMAB0191 VMPB0102 VGQB0148 VMBB0018 VMSB0027 VGQB0142 VMAB0180 VMGB0053 XQS2+A4FJK XSN26+6FJK XSS3+8FJK XSB26+6FJK XSB4+6FN XYN26+J5FN XYN26+J6FJK XYN3+J6FN VEEB0272-2 S1VEPB0484A
FRONT BASE FRONT V EDGE BOTTOM CASE BREAKER CAP BACK LOCK ANGLE SLIDE GEAR (B) COVER LOCK PROTECTOR LOCK SPRING LOCK COVER PLATE BEARING METAL PROTECT COVER PROTECT SPRING PROTECT SHAFT P.C.B. GUIDE RAIL LENS CN MOUNTING ANGLE XLR CAP(FEMALE) SCREW SCREW SCREW SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER SCREW w/ WASHER CABLE FRONT MIC P.C.BOARD (RTL)

PRT-10

REAR CASE (1) ASSEMBLY

11 EE28 E9 10

REAR CASE (2) ASSEMBLY (See PRT-13) 104

EE24 E104

PRT-11
338 E19 E20 E22 E27 E28 E29
(RTL) 1 (RTL) 1 (RTL) 1 (RTL) 1 (RTL) 1 (RTL)
N0BM1EJ00012 DC / DC CONVERTER VMAB0186-1 VMG1495 VMGB0052 VGMB0104 VMS4284 VKFB0003 VMTB0142 VGMB0106 VGQB0150 VMX3255-1 VMGB0046 V5RA0281A4 VMTB0134 VMGB0062 VMTB0135 BSU2606 VMTB0143 VGUB0033 VGPB0091 K1ZZ00000314 K1YD12000003 K1ZZ00000817 VMXB0062 VGQ7035-1 3AE001046AAA VMG1085 VGUB0034 VMGB0062 VMGB0053 XQN26+A6FJK XSN26+6FN XSN26+6FJK XSB26+6FN XYN26+J5FN XYN3+J6FN VQLB0261 VEEB0242 VEEB0243 VEEB0245 VEEB0342-2 VEEB0343-2 VEEB0261-1 VEEB0266 VEEB0275-1 S1VEPB0482B S1VEPB0483B S1VEPB0485A S1VEPB0495B S1VEPB0515B S1VEPB0516B PW UNIT MOUNTING ANGLE BNC CAP XLR CAP(MALE) BLANK PANEL BELT HOOK SCREW D-SUB COVER D-SUB CUSHION INCOM PANEL GUARD BRACKET GUARD MOUNTING BRACKET RUBBER BUTTON ROTARY SWITCH KNOB KNOB CUSHION TOGGLE SWITCH SHEET WATERPROOF SHEET SPACER LED MASK VR KNOB REAR PANEL DUST CAP DUST CAP DUST CAP EARPHONE SPACER EARPHONE CAP NUT WASHER SLIDE SW SEALING PACKING SLIDE SW KNOB TOGGLE SWITCH SHEET XLR CAP(FEMALE) SCREW SCREW SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER INCOM LABEL CABLE CABLE CABLE CABLE CABLE CABLE CABLE CABLE INCOM P.C.BOARD REAR SW P.C.BOARD EARPHONE P.C.BOARD MIC AMP P.C.BOARD INCOM SW P.C.BOARD INCOM LED P.C.BOARD

PRT-12

REAR CASE (2) ASSEMBLY

112 15

111 20

PRT-13

VMD4892-1 VMB3806 VMD4893-1 VMLB0052 VKF3777 VGU9447 VGMB0105 VMAB0189 VGMB0102 5Z1A006A 2F1A034A 8Z1A004A VMAB0187 0CB562 VGMB0095-1 VGFB0015 VMGB0055 VMGB0049 VMG1491 VMAB0226 VMGB0048 VMAB0188 VMAB0190
V EDGE (FEMALE) V EDGE LOCK SPRING V EDGE LOCK LOCK RELEASE LEVER V EDGE COVER LOCK RELEASE KNOB D-SUB MOUNTING ANGLE D-SUB PLA NUT TE OPTICAL CONNECTOR CASE OPTICAL CN WASHER OPT CN MOUNTING ANGLE WAVE WASHER OPTICAL CN ST PPER O BUSHING REAR CASE FAN LOUVER SHIELD TUBE (B) BNC CAP(SDI) BOTTOM GUARD STOPPER PLATE VIBLATION INSULATOR FAN MOUNTING ANGLE BNC MOUNTING ANGLE (P) 1 (P) 1 (E, MC) 1
K1SYYYYA0002 BNC CONNECTOR XQN2+A4FJK XQS2+A4FJK XSN3+8FN XSS26+6FN XSS26+6FJK XSS3+6FJK XSB2+6FJK XSB3+6FJK XSB3+8FJK XYN26+J5FN XYN3+J6FN V7MA0338A4 VEEB0345 VEEB0246-2 VEEB0253 VEEB0254 VEEB0265 SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER SEE MANUAL LABEL FAN ASSY CABLE CABLE CABLE CABLE

PRT-14

HANDLE ASSEMBLY

127 EE12 9

PRT-15

202 E32 E23

VGQ7320 VMG1548 VGQ7321 VGM2168 VGMB0099 VKHB0001 VMSB0030 VMXB0063 VMGB0057 VMS7305 VGU9262-1 VMS7216 VMGB0050 VMTB0138 VKFB0002 VMGB0051-1 VMGB0062 VMS4284 VGQ7027-2 VHDB0020 XQN26+A6FJK XSB4+10FJK XYN26+J5FN XXE26D3FJK XVE4B20VW VGH4697 VQLB0260 S1VEPB0520A S1VEPB0487A
VF RING RUBBER RING VF WASHER VF BASE GUIDE VF SLIDE BASE GLIP VF SLIDE SHAFT VF LOCK SPACER O RING LOCK SHAFT (B) SHAFT LOCK KNOB LOCK SHAFT (A) RUBBER GRIP GLIP CUSHION GLIP COVER RUBBER BUTTON TOGGLE SWITCH SHEET BELT HOOK SCREW CORD CLAMP BELT CLAMP SCREW SCREW SCREW SCREW w/ WASHER SET SCREW CAP SCREW VF LOCK LABEL LABEL SET HDL RET P.C.BOARD HDL TALLY P.C.BOARD (RTL) 1 (RTL)

PRT-16

SIDE CASE ASSEMBLY

120 22

21 202

PRT-17

VGMB0097-1 VMGB0061 VGQB0147 VKF3647 VMCB0006 VGMB0107 VMTB0136 VMX1558 VGMB0096-1 VMGB0058 VSCB0066 VSCB0070 VSCB0069 VMGB0060 VMGB0059 VMCB0005 VMGB0046 VGQB0146-1 VGB0596 VGB0625 VMX1558 XQN26+A6FN XSB3+8FJK XYN26+J5FN XYN26+J6FJK XTN26+6GFN XSB3+8FJK VQL0V73-1 VQL0W35 VQLB0232 V7MA0103A4 VQLB0277 VQLB0260
SIDE CASE (R) RIGHT SIDE SHIELD FACE PAD POWER SWITCH LID LID SPRING POWER SWITCH PANEL P.C.B. HOLDING CUSHION NYLON WASHER SIDE CASE (L) D-SUB SHIELD TUBE D-PRO HEAT SINK HEAT SINK (SMALL) HEAT SINK (LARGE) LEFT SIDE SHIELD (B) LEFT SIDE SHIELD (A) EARTH SPRING RUBBER BUTTON SIDE CASE COVER MF BADGE PANASONIC BADGE NYLON WASHER SCREW SCREW SCREW w/ WASHER SCREW w/ WASHER SCREW SCREW HHS LABEL FCC/DOC LABEL POWER LABEL SHOCK MARK LABEL FILTER LABEL LABEL SET (P) 1 (P) 1 (MC) 1 (P) 1 1

PRT-18

PACKAGING PARTS ASSEMBLY (AK-HC3500P)

Multi-Format Camera 1

B9CA5472AN PE45X63C05B PE26X40C05B VQTB0273-2 VQC4626 VQA0892 VQLB0263 VGQB0141 YWT050803 XSB3+8FJK VQLB0307-1
PACKAGING ASS'Y POLYETHLENE BAG POLYETHLENE BAG OPERATING INSTRUCTIONS UL SAFETY INSTRUCTIONS WARRANTY SHEET CAMERA NO. SHEET BU LOCK GUIDE POLYETHLENE BAG SCREW PACKAGING LABEL 2 (P)

PRT-19

PACKAGING PARTS ASSEMBLY (AK-HC3500E/MC)

Multi-Format Camera 202

202 202
B9CA5472AN PE45X63C05B PE26X40C05B VQTB0274-2 VQTB0275-2 VQC3614 VQCB0113 VQLB0263 VGQB0141 YWT050803 XSB3+8FJK VQLB0278 VQLB0279-1
PACKAGING ASS'Y POLYETHLENE BAG POLYETHLENE BAG OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS AREA SHEET WARRANTY LEAFLET CAMERA NO. SHEET BU LOCK GUIDE POLYETHLENE BAG SCREW PACKAGING LABEL PACKAGING LABEL (MC) 1 (E) 1 (E) 1 (MC) 1 (MC) 1 (E)

PRT-20