Form 1

F-01s-02

Product Environmental Aspects Declaration
Network camera (PSC No.BH-01)

No. BH-05-020

Network camera

http://panasonic.jp/p3/

Panasonic Communications Co., Ltd. Environmental headquarters TEL 81-92-477-1860 FAX 81-92-477-3285

BL-C31

No Zoom (digital 10X)

Product Specification

1) Lens : Focus 4.5mm F2.8 2) Image Sensor : 1/4-inch CMOS Sensor 320,000 pixels 3) Network Interface : IEEE802.11/b , 10Base-T/100Base-TX 4) Mechanism : Pan/Tilt Maximum Pan/Tilt Speed(50degrees/second) 5) Video Compression : JPEGVGA:7.5fps,QVGA:15fps 6) Installation environment of a camera : Indoor use 7) Weight : about 200g (0.46 lb.) (Only the unit)
Life Cycle Impacts Global warming Impact (CO2 equivalent) 94.0 kg Acidification(SO2 equivalent) Energy Consumption Global warming Impact (CO2 equivalent)

(Kg) 0

0.120 kg 2,053 MJ
6.9 Raw material Production

3.6 Product Production

0.1 Distribution Use

0.6 Disposition

The main part of a product, manuals, accessories, packing material, and the set box are contained in the range for public presentation. The conditions of a use stage: usable-years five years,picture transmitting time 30 minute/one day, standby status 23.5 hours / one day
Notes: 1. Original LCA data is available on PEIDS: Product Environmental Information Declaration Sheet, and Product Data Sheet. 2. Unified rules and requirements for EcoLeaf LCA, for intended product category, are available as a PSC: Product Specification Criteria. Visit EcoLeaf website under JEMAI homepage at http://www.jemai.or.jp/ecoleaf_e/ for details.
[Supplemental environmental information]
Assembly production of this product and production of a mounting circuit board are performedat the factory certified with ISO 14001. Specific brominated flame retardants(PBB and PBDE) are not used in appearance plastic material. Pb-free solder is used for the main circuit board.
A chrome free surface treated steel plate that doesn't contain the hexavalent chromium is used for the sheet metal of the product.
Product Environmental Information Data Sheet PEIDS
Document control no. Product vendor EcoLeaf registration no.
F-02As-02 Panasonic Communications Co., Ltd. BH-05-020 Network Camera BH-01

Life Cycle Stage

Unit Function DB version Characterization Factor DB version

v2.0s v2.0s BL-C31

PSC name PSC code

Product weight (kg)

Product type Package (kg)

Weight total (kg)

Total 2.05E+03 4.90E+02 1.18E+01 1.39E+01 5.70E+00 7.67E-04 2.21E-01 9.88E-02 2.75E-02 1.09E-02 8.38E-05 1.41E-04 4.57E-04 1.97E-1.93E-0 4.36E-01 4.87E-02 4.04E-02 1.29E-03 9.26E-01 9.04E+03 9.36E+01 7.38E-02 6.55E-02 1.51E-03 2.05E-03 1.48E-02 4.01E-03 4.70E-04 4.04E-03

In/Out items

Production Raw material Product

Distribution

Disposition

Energy Consumption

Energy resources
Coal Crude oil (for fuel) LNG
Uranium content of an ore
by Impact by Emission/Discharge to the environment Res

to Soil system

Crude oil (for material) Iron content of an ore Cu content of an ore Al content of an ore Ni content of an ore Cr content of an ore Mn content of an ore Pb content of an ore Sn content of an ore Zn content of an ore Au content of an ore Ag content of an ore Silica Sand Halite Limestone Natural soda ash recycle part Wood Water CO2 SOx NOx N2O CH4 CO NMVOC CxHy Dust BOD COD N total P total SS Unspecified Solid Waste Slag Sludge
Low level radio-active waste
Energy resources (crude oil equivalent)

Impact assessment

Mineral resources (Iron ore equivalent)
by Emission / Discharge to environment

to Atmosphere

Global Warming (CO2 equivalent)

Acidification (SO2 equivalent)
MJ Mcal kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg
1.13E+02 2.70E+01 8.98E-01 1.20E+00 2.21E-01 2.54E-05 2.21E-01 9.88E-02 2.75E-02 1.09E-02 8.38E-05 1.41E-04 4.57E-04 1.97E-1.93E-0 4.36E-01 4.82E-02 3.52E-02 1.29E-03 9.26E-01 7.37E+02 6.78E+00 8.42E-03 9.82E-03 5.62E-04 6.68E-05 1.70E-03 1.31E-04 2.38E-04 1.14E-03 4.21E-02 3.50E-01 2.03E-02 1.81E-05 2.25E+00 7.92E+00 6.93E+00 1.53E-02 6.18E-04
7.20E+01 1.72E+01 3.26E-01 7.08E-01 1.68E-01 2.21E-2.52E+02 3.61E+00 1.97E-03 4.01E-03 4.74E-05 5.90E-05 3.78E-04 1.16E-04 1.01E-05 8.61E-05 1.95E-0 1.54E-05 1.30E+3.62E+00 4.78E-03 8.81E-05
8.76E-01 2.09E-01 2.05E-06 1.91E-02 2.96E-04 1.39E-1.52E-03 6.18E-02 7.60E-05 9.56E-04 1.12E-06 3.71E-10 3.77E-04 7.26E-10 1.91E-05 7.58E-9.73E-11 1.95E-6.21E-02 7.45E-04 3.88E-05
1.87E+03 4.46E+02 1.06E+01 1.20E+01 5.31E+00 7.19E-8.04E+03 8.25E+01 6.30E-02 4.99E-02 9.01E-04 1.92E-03 1.22E-02 3.76E-03 1.97E-04 2.69E-5.01E-04 3.11E+8.28E+01 9.79E-02 2.77E-03
8.77E-01 2.10E-01 4.27E-03 1.12E-02 2.25E-03 2.88E-4.18E-04 5.21E-0 3.56E+00 5.78E-01 3.13E-04 8.18E-04 1.28E-06 7.72E-07 1.90E-04 1.51E-06 6.06E-06 5.09E-05 5.24E-0 2.01E-07 1.90E-5.78E-01 8.85E-04 2.41E-05
Impact by Resource Consumption
Exhaustible resources to Atmosphere

Renewable resources

Inventory anaiyses

to Water domain

to Water system

Mineral resources

5.66E-01 3.50E-01 2.03E-02 5.35E-04 3.47E+01 7.92E+00 9.40E+01 1.20E-01 3.54E-03

Exhaustible resources

Photochemical Oxidant
[Notes for readers: EcoLeaf common rules]
I. Stage related A. "Production" stage is intended for two sub-stages listed below. (1) "Raw material" production: consists of mining, transportation and raw material production. (2) "Product" production: consists of the parts processing, assembly and installation. B. "Distribution" stage is intended for transportation of produced product. Transportation of consumables and maintenance goods (e.g. replacement parts) for use of the product are included into "Use" stage. C. "Use" stage is intended for use of the product (active mode, standby mode, etc.) and production, transportation to disposal/recycle of consumables/maintenance goods (e.g. replacement parts). D. "Disposition/Recycle" stage is intended for environmental impacts by product disposition/recycle, and deduction by recycling (e.g. impact reduction of raw material production). II. Inventory analyses A. Data of mineral ore on "Exhaustible resources" are presented in weight of pure ingredients (e.g. iron, aluminum) in the ore. B. Data on energy resources are presented based on origin in calorific value. e.g. Data on uranium ore presents weight of uranium concentrate, which is available for use as an atomic fuel. C. Data of discharge to water system are in actual figure (not calculated using unit function in inventory analyses). III Impact analyses Result of the "Impact analyses" is found in converting results of inventory analyses into total amount of a reference material (e.g. CO2 in case of "Global Warming"). A. Impact "by resource consumption" represents magnitude of impacts to resource depletion. B. Impact "by emission/discharge to environment" represents magnitude of impacts to Atmosphere, Water and Soil system. IV Data entry format A. Exponential notation, after the decimal point to two, should be used. B. Indicate "0" instead exponential notation, if the result of calculation or estimation is considered as "zero" or negligible in comparison to related results. C. Indicate "NA" if calculation nor estimation can not be done, in order to differentiate to indicate "zero". D. Row total of the data is automatically calculated, excluding a row includes "NA" item. Row total of such is presented as a blank (no data). (BGD for material production are for production from mineral ore. Those data do not include reclaiming processes like recovery from scrap.)

[Notes for readers: Target product specific]

Form 3

Product data sheet
Input data and parameters for LCA
Document control no. Product vendor EcoLEaf registration no.
F-03s-02 Panasonic Communications Co., Ltd. BH-05-020 Network Camera (PSC-ID: BH-01) 1
Breakdown of primary materials Weight (kg) Material name 1.55E-02 6.50E-02 Glass Paper

Product type

PSC name LCA/LCIA in units of:

Package (kg)

BL-C31 0.66
1. Product information (per unit): parts etc. by material and by process/assembly method
Math breakdown of parts, which need to apply Processing / Assembly Base Units (Parts B, C)

Material name Steel

Weight (kg) 2.00E-04 4.07E-01
Process name Press molding: Iron (kg) Press molding: Nonferrous metal (kg) Injection molding (kg)
Weight (kg) 2.52E-01 4.00E-04

Process name

Weight (kg)
electromagnetic steel plate
5.76E-02 1.08E-01 5.20E-04 mounted circuit board 8.00E-04 5.62E-02 wood 1.66E-02 8.95E-03 Other 2.35E-01 6.90E-04 1.13E-03 3.83E-01 4.82E-01 Subtotal 8.66E-01 Subtotal Total 3.61E-01 0.00E+00 Subtotal Note Product mass is the mass of only the main part of a camera. Accessories, such as packing material of individual packaging and a set box and operation manual, CD-R Stainless steel copper Aluminum Thermoplastic resin Thermosetting resin Rubber Subtotal
2. Production site information (per unit): Consumption and discharge/emission for production/processing/assembly within the site.
SOx and NOx should be indicated in SO2, NO2 equivalent. Classification Energy Energy Material Distribution Electricity (kwh) Kerosene as fuel (kg) Industrial water (kg) 5.17E+00 5.66E+00 3.35E-01 Quantity Note Classification Distribution Quantity Note Note On the manufacture stage, the manufacture load of printed circuit board mounting and the manufacture load of a main part assembly are added up.
3. Distribution stage information (per unit): means, distance, loading ratio, consumptions and emissions/discharges. Distribution

Means of transportation

Emission/ Consump

Product

Conditions
Quantity Note Note Domestic transportation distance is set to 500km based on PSC regulation.
Consumption Diesel truck: 10 ton (kg.km) 7.70E+02
Consumption Diesel truck: 2 ton (kg.km) 1.24E+01
4. Use stage (per unit): use condition (mode, term) including active mode, standby mode and maintenance. 4.1 Product and accessories subject to this analysis

Classification Consumption Distribution Electricity (kwh) Quantity 1.98E+02 Note Note Operating condition Power consumption is added up with an actual result value. -usable years : For five years - picture transmitting time : 0.5H/day It awaits and is time. : 23.5H/day In picture transmitting time 0.5H, Pan/Tilt is ten round trips. It sets up as - 365 days.
4.2 Disposition/Recycle information on consumables and replacement parts Consuma

Classification

Distribution Quantity Note Note With exchange and no article of consumption
5. Disposition/Recycle stage information (per product): process method and scenarios
Consumption Diesel truck: 4 ton (kg.km)
Consumption Shredding (kg)
Discharge Incineration to landfill (as ash) (kg)
Discharge Landfill: General waste (kg)

Scenario

8.70E-01 4.10E-01 4.60E-01 Quantity 1.74E+02 Note Note As wastes, combustibles are added up after crush and incineration and incombustibles are added up as reclamation.

6. Others