Power Line Communication HD-PLC Ethernet Adaptor

BL-PA100KT / BL-PA100*

*Set of two BL-PA100s
A New Era of Internet Access Ease and Freedom
Connect through Any AC Outlet in Your Home Easy Setup No PC Required Fast,reliable,and secure
Every AC outlet becomes a network entry point.

BL-PA100

Network camera BL-PA100 BL-PA100
HUB AC PC AC Network printer Electrical wiring BL-PA100

Internet

modem/router BL-PA100
Every AC Outlet in Your Home Becomes an Internet Portal
Everything you thought about home Internet access is about to change. Have you ever had to run long, unsightly cables from your PC to the modem or router? Or have you thought about installing a wireless LAN but worry about complicated settings and problems with security? Then you will love the new Panasonic HD-PLC Adaptor. With the Panasonic HD-PLC Adaptor,
*Internet connection requires a contract with a provider, and the appropriate PC and router settings.
every AC power outlet in your home becomes a portal for Internet access. Think about that for a moment: You can connect to the Internet from any power outlet in your home. There are no complicated settings to make or cables to connect. And security is outstanding. You enjoy an entirely new level of ease and freedom in going online.
Connect through any AC outlet in your home
The HD-PLC adaptor makes it possible for your home electrical wiring to serve as a link between your PC and modem. Getting online access is as easy as plugging into a power outlet. You can move your PC and connect to the Internet anywhere there is a power outlet. LAN (Ethernet)
Cables must be laid throughout the house. Once the cables are connected, it is difficult to change locations.

HD-PLC Ethernet adaptor

Once it is set up, you can access the Internet from any power outlet. Communication is highly safe. Communications are comfortably fast.
BL-PA100 PC AC Electrical wiring AC BL-PA100 AC

Wireless LAN

Security settings are complicated. Obstacles such as thick walls can block communications.

Modem/ router

Modem/ router PC
Easy setup - No PC required
There's no tricky installation or complicated settings. Just take the BL-PA100KT out of the box and plug it into the power outlet. Set up the other equipment on the network, such as routers and PCs, as described in their respective instructions. Adding more HD-PLC adaptors*1 is easy too, using the following quick 3-step procedure.
* One HD-PLC adaptor can be set as the master unit, and individual terminal units can be registered. One of the BL-PA100KT units is set as a master unit and the other is set as a terminal unit when they are shipped from the factory.
Fast, reliable, and secure
With speeds of up to 190 Mbps*2, advanced error correction, and AES 128-bit encryption, the BL-PA100 provides peace of mind at the speed of light.
* Connecting this product to a power strip which has a noise filter or surge protector may interfere with the performance of this product. For best results, please connect this product directly to a wall outlet.
** Certain electrical devices such as hair dryers or vacuum cleaners emit electrical noise, and may interfere with the performance of this product. *** This product may interfere with short wave radios, lights or lamps which have a dimmer switch or a touch-sensitive on/off feature, or other PLC adaptors which do not use the HD-PLC standard.

Step. 1

Plug it in
Plug the Master and Terminal units into the same power outlet.

Master

Step. 2

Push two buttons

Push the Setup button on each unit.

Step. 3

Watch it light up
An LED lights up to show that setup is complete. You can move the units anywhere you want to go online at home.

Master CHECK

Simple network speed testing
You can confirm the speed of each adaptor's HD-PLC connection by simply pressing a button.

Refer to the chart below to determine the network speed.

PLC LAN MASTER

Terminal CHECK

Terminal Master/Terminal

Network speed

No link

Better
* The speed testing function provides a simple indication of the communications speed between the Master and Terminal units. It does not indicate the communications speed between Terminals. Also, the indicated speed is only valid for the moment at which it was measured. It does not imply that the indicated speed will be maintained.

Specifications

LAN interface

Model No.

Standard

BL-PA100A

Main unit

HD-PLC

Interface Protocol Operating temperature Operating humidity
10Base-T/100Base-TX Auto MDI/MDI-X IPv4 / IPv6 / TCP / UDP 0 C to 40 C (32 F to 104 F) 20 % to 85 % 121 x 40 x 70 mm (4 3/4 x 1 9/16 x 2 3/4 inches) (Except protrusion) 240 g (0.53 lb) Input 100 - 240 V AC 4W Reed-Solomon encoder/decoder and Convolutional encoder/Viterbi decoder AES 128-bit encryption About 150 m (490 ft) (Varies depending on the electrical environment )

PLC Interface

Actual rate Maximum no. of adaptors per network Maximum no. of devices connected to each adaptor
16 ( including the master) 8

General

Maximum 70 Mbps (UDP) Maximum 42 Mbps (TCP:When using FTP)
Dimensions (W x D x H) Weight Power supply Consumption
HD-PLC standard specification
Frequency band Modulation Transmission PHY rate Access method 4 28MHz Wavelet OFDM (16 PAM to 2 PAM) Maximum 190 Mbps*2 CSMA / CA TDMA
Error collection Encryption Communication distance
*1 BL-PA100 *2 This is the theoretical maximum data transmission speed of the HD-PLC standard. The actual maximum data transmission speed is about 70 Mbps. Results may vary depending on electrical conditions, network environment, and other factors. See the specifications for more information.
Notes Ethernet is a registered trademark of Fuji Xerox Co., Ltd. Other company names and product names are trademarks or registered trademarks of their respective companies.
0.3M0306SPSD-PLCA-LT.CE Design and specifications are subject to change without notice.