Wireless Camera Monitoring System

BL-WV10

Wireless Camera Monitoring System Package

BL-MS102*

BL-C30 BL-WV10

BL-MS102

*The BL-MS102 is a set containing two BL-C30 models and one BL-WV10.

Stores

Warehouses

Entrances

Factories
Monitoring Is Good for Business
Even if your warehouse, factory or shop is close to the office, it takes time to walk over and check it. Why not change your office TV into a surveillance monitor with the BL-WV10. Then you can keep an eye on things without having to leave your desk. By adding Internet access to the system, you can even stay informed while you're away or on the road. It's a great way to raise both customer satisfaction and business efficiency.
BL-C30* Internet Wireless
*The transmission range when using a wireless LAN varies depending on the surroundings.

le cab eo d Vi

Easy Setting-Up
Simply connect a video cable between the BL-WV10 and your TV. Then make the settings by remote control with the onscreen menu, and start monitoring immediately. With the BL-MS102, the camera (BL-C30) and BL-WV10
settings are already made, so set-up is even easier.
Panasonic Improves Safety and Efficiency
Check large areas in fine detail.
Extended-time recording even at night.

Other features

Network Connection and Cell Phone Monitoring
You can monitor over the Internet or an intranet. An Internet connection also lets you monitor right from your cell phone*. When the sensor detects something, it sends the image to you attached to an e-mail message.
*Internet-compatible models only. Images are JPEG only.
Remote Pan/Tilt and Zoom Control on TV
Use the remote control to change the camera's direction, vertically or horizontally, while watching the image on TV. For a detailed check, you can enlarge the view with the 16x zoom. With the BB-HCM381 or BB-HCE481, you can use the camera's 21x optical zoom for an even closer look.
SD Memory Card Recording*
You can record moving or still images onto an SD Memory Card even at night when nobody is operating the system. You can also combine this function with the Automatic Alert Setting, to record only when there is movement. If you need a longer recording capability, just connect the system to a DVD or video tape recorder.
*Recording onto an SD Memory Card is not possible in Sequential Display mode.
SD Memory Card Recording Capacity
Movie Recording Time SD Capacity 32MB 64MB 128MB 256MB 512MB 1GB 2GB Timer/Sensor LONG* 5hr. 10hr. 21hr. 43hr. 87hr. 167hr. 341hr. Recording 10min. 40min. 40min. 20min. 10min. 50min. 20min. Standard Recording C Series 2min. 4min. 8min. 16min. 33min. 65min. 2hr. 16min. 32MB 64MB 128MB 256MB 512MB 1GB 2GB 20120 40920
Remote Control & Multi-Camera Capacity
Make all major settings for recording, multicamera viewing, and more easily with the remote control.
BL-C10/C30 Pan (display range: 143max) Tilt (display range: 82max)
Picture Storage SD Capacity LOW No. of Pictures HIGH
*Resolution : 320 x 240, Image quality : favor motion, Image refresh interval : 5 sec.
Check visitors with ease.

Part Names [Rear View]

Monitor things periodically.
LAN jack section Video out terminal
Factory default reset button

Automatic Alert Settings

You're alerted immediately when someone passes through the entranceway. Even if the TV is turned off, a buzzer on the adaptor ensures that no visitors go unchecked. Three detection methods available: Human Detection sensor*1 (detects heat), Motion Detection function*2 (detects light), and external sensor*3.
*1-1 Applicable models:BL-C10/C30 *1-2 The detection range of the sensor becomes shorter as the environmental temperature within the range of the sensor becomes higher. *2 Applicable models:BB-HCM311/HCM331/HCM371/HCM381/HCE481, BL-C1/C20/C30 *3 Applicable models:BB-HCM311/HCM331/HCM371/HCM381/HCE481
Sequential Display* with Time Stamp
When multiple cameras are used, this function automatically switches from one to another. In addition to providing thorough monitoring, it also lets you display the time. To record, simply connect the system to a DVD or video tape recorder.
*Set the switch on the back of the BL-WV10 to Sequential Display mode to use.

DC IN jack

Mode selector

Antenna

BL-C30
Lens Factory default reset button Tripod mounting section
Switch (Wireless or wired)

DC IN jack The MAC address Serial number
Motion Detection Function/ Setting Browser

Human Detection Sensor

Monitoring Image

Human detection sensor

Lens ON/OFF switch

Ethernet (LAN) port

Specifications
Wireless camera monitoring system

Interface

Wireless: 802.11b/g LAN side: Ethernet (10 Base-T/100 Base-TX) x 4 ports Video output terminal (composite PAL) x 1 SD Memory Card slot x 1

Network camera

Image data compression system Video resolution Image quality Frame rate*
JPEG (Motion JPEG for moving image display) 640 x 480, 320 x 240, 160 x modes (favor clarity, standard, favor motion) Max. 7.5 frames/sec. (640 x 480) Max. 15 frames/sec. (320 x 240) Max. 15 frames/sec. (160 x 120) Standards

Wireless type

802.11 b/g Diversity 13 ch. up to 54 Mbps. WEP 64/128/152 bit +5C to +40C 20 % to 80 % (No condensation) 98 x 74 x 73 mm (Only the unit) 200 g (Only the unit) AC adaptor: Input 100-240 V AC, Output 12 V DC 6.4 W

Wireless General

Antenna Number of channel Transmission speed Security Operating temperature Operating humidity Dimensions (H x W x D) Weight Power supply Consumption
Supported protocols Video resolution Image quality Image data compression system Frame rate Security Operating temperature Operating humidity Dimensions (H x W x D) Weight (Main unit only) Power supply Consumption
IPv4: TCP, UDP, HTTP, FTP, DHCP 640 x 480, 320 x modes (favor clarity, standard, favor motion) JPEG (Motion JPEG for moving image display) Max. 30 frames/sec (320 x 240) User ID/Password 0C to +40C 20 % to 85 % (No condensation) 42 x 220 x 171 mm (excluding antenna and protrusions) 500 g AC adaptor: Input 100-240 V AC, Output 12 V DC 7.5 W

Server

Security Buffered images*2 Viewing angle
User ID/Password Approx. 250 images: (320 x 240), standard image quality 43 horizontal (total 143) 32 vertical (total 82) Pan: Max. 50/sec Approx. 320,000 pixels Fixed (focal range: 0.5m to F2.to 10,000 lux Ethernet (10 Base-T/100 Base-TX) Tilt: Max. 50/sec
Revolving speed Number of pixels Lens focal point Lens brightness Required light intensity Network interface

*1 This varies depending on the subject, image quality, network environment, PC performance, etc. *2 The number of images that can be stored varies depending on the subject.
http://panasonic.co.jp/pcc/products/en/netwkcam/
0M0106SP-MS102WV10-LT.CE.B

All pictures simulated.

Design and specifications are subject to change without notice.