MAJOR OPERATING CONTROLS APPEARANCE

Front & Side View

BM-ET200 SPECIFICATIONS

General

Power source (*1) Power consumption Ambient operating temperature Ambient operating humidity Dimensions Weight Interface Network Network protocol Available card reader for Iris on card system 12 V DC/24 V DC Max. 24 W 0 C to +40 C (32 F to 104 F) 30 % to 90 % 203 mm (W) x 190 mm (H) x 77 mm (D) (8" (W) x 7-1/2"(H) x 3-1/16"(D)) 0.9 kg (1.98 lbs.) (this iris reader only) Wiegand, RS-485 10Base-T/100Base-TX (Auto negotiation) TCP/IP RWK400 (Manufactured by HID Corporation)

Iris Reader

BM-ET200

77(3-1/16")

203(8")

190(7-1/2")

Input/Output
0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more make contact output, Normally Open, Pulse width: 0.1 s to 60 s, 24 V DC, 100 mA, ON-Resistance 6 Audio Output (Preamplifier) Stereo mini plug (3.5 mm)(10 k, 100 mV [P-P]) High speed serial interface Numeric Key, External memory (*5) Interface Board BM-ETA201 (NTSC: included in the BM-ET200 PAL: optional) Dimensions 65 mm (W) x 76 mm (H) x 31 mm (D) (2-9/16" (W) x 3" (H) x 1-1/4" (D)) Alarm output1 (tamper detection) Open collector output, Normally Open, Active low, 24 V DC, 24 mA Alarm output2 (power status) Open collector output, Normally Close (Low level), 24 V DC, 24 mA Recognition result output2 (REJECT) Open collector output, Normally Open, Active low, Pulse width: 0.1 s to 60 s, 24 V DC, 24 mA Buzzer input: 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more Time adjust input 0 V to 5 V, 24 mA max., Active low, Pulse width: 100 ms or more (*7) Interface (card reader) Wiegand, RS-485 (Either can be selected.) Wiegand power output (card reader) 5 V DC, 100 mA max. Wiegand DATA0 input(card reader) 0 V to 5 V DC, 25 mA max., Active low Wiegand DATA1 input (card reader) 0 V to 5 V DC, 25 mA max., Active low RS-485 (A), (B) (card reader) Differential input: 0.2 V or more, Differential output: 2 V or more (When termination is ON) (*6) Interface (access control panel) Wiegand, RS-485 (Either can be selected.) Wiegand power input (access control panel) 5 V DC (No connection available) Wiegand DATA0 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low Wiegand DATA1 output (access control panel) 0 V to 5 V DC, 25 mA max., Active low Wiegand ACCEPT-LED input (access control panel) 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more Wiegand REJECT-LED input (access control panel) 0 V to 5 V, 24 mA max., Active low, Pulse width: 200 ms or more RS-485 (A), (B) (access control panel) Differential input: 0.2 V or more, Differential output: 2 V or more (When termination is ON) (*6) Video Surveillance Camera BM-ETC202 (optional) Video Output 1 V [P-P] NTSC/PAL composite 75 BNC connector Iris Reader BM-ET200 Recognition start trigger input Recognition result output1 (ACCEPT)

Bottom View

1 Distance Indicator 2 Front Panel 3 Mirrors 4 Eye Image Capturing Cameras 5 Audio Volume Controller 6 Video Surveillance Camera (Option) 7 Speaker 8 Results Indicator 9 Tilt Handles 10 Live Indicator 11 Front Cover 12 High Speed Serial Interface
83.5 (3-5/16") 20.3 (13/16")

34 (1-5/16")

52 (2-1/16")

46 (1-13/16")

Unit : mm (inch)
RECOMMENDED SMART CARD READERS AND WRITERS
Applicable products Manufacturer Smart Card Writer Smart Card Product / Product No. HID Corporation Ltd. RWK400 RW400 RFIDeas, Inc. RFID1356i (USB and RS-232) HID Corporation Ltd. 2001, 2011, 2021, 2031, 2041, 2051, 2061 This software supports the blank card only.
In regard to details of the Smart Card Writer and the Smart card, refer to the respective instruction manuals attached to merchandise. When a card writer is connected and a USB-RS-232C conversion connector is used, the system may not operate normally. The USB connections are applicable to Windows XP only. Operation is impossible with Windows 2000.

Function

Iris recognition time Approx. 0.3 seconds (After iris image capturing until the recognition result is output) (*2) Approx. 5 seconds (Server certification. After iris image capturing until the recognition result is output) (*3) Approx. 30 cm to 40 cm (11-13/16" to 15-3/4") between the eyes and the mirror 50 users max. Iris Reader BM-ET200: 5,000 users max. Administration Software: 10,000 users max. (*4) 14 languages supported (English, French, German, Spanish, Italian, Turkish, Arabic, Chinese, Korean, Russian, Portuguese, Dutch, Swedish, and Japanese) Mute, Simple (recognition result), and Full (voice guidance and recognition result) selectable Lighting of the lamp indicates the proper distance between the user and the main body. Blinking, On, and Off selectable Horizontal: 115 , Vertical: 85 (Fixed)

PRODUCT CONFIGURATION

Iris Reader Interface Board Administration Software
Eye image capturing range Total number of users enrolled Stand alone mode Network mode Voice guidance

BM-ETA201

(NTSC: included
in the BM-ET200 PAL: optional)

BM-ES200A

(5,000 User license included)

BM-ES200

(25 User license included)
Video Surveillance Camera

BM-ETC202

(optional)

User License Software

BM-EU31000

(for 1,000 Users)

BM-EU35000

(for 5,000 Users)

BM-ES200A supports Microsoft Windows 2000 Professional, Microsoft Windows XP Professional and Microsoft Windows Vista BM-ES200 supports Microsoft Windows 2000 Professional and Microsoft Windows XP
Distance indicator Live indicator Angular field view (Video Surveillance Camera: BM-ETC202) Security function Tamper detection switch, Iris data encryption *1 The third-party external power-supply should meet *2 The recognition time may differ depending on the following specifications, and must be a UL Listed recognition condition. access control power limited device. *3 The recognition time may differ depending on capturing conditions, network conditions, or the total number of Output voltage Output current capacity enrolled users. 12 V DC 0.5 V 2 A (NTSC)/1.2 A (PAL) or more *4 User Licence Software BM-EU30000 Series (option) 24 V DC 0.5 V 1 A (NTSC)/0.6 A (PAL) or more is required. Rated ripple voltage/Ripple noise: 150 mV [P-P] or less *5 Refer to the dealer for available external devices. Overcurrent protection: Enabled (mandatory) *6 Our exclusive protocol is employed. *7 Refer to the dealer for available external devices.
Highly accurate recognition with fast capture engine and dual mirrors
Trademarks and registered trademarks Private ID, and KnoWho are trademarks of Iridian Technologies, Inc., USA. iCLASS is a registered trademark of HID Corporation. Windows 2000 Professional, Windows XP Professional or Windows Vista are registered trademarks of Microsoft Corporation in the USA and/or other countries. All other trademarks are the property of their respective copyright holders.

Important Safety Precaution: carefully read the operating instructions and installation manual before using this product. Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
All TV pictures are simulated. Weights and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations.

DISTRIBUTED BY:

http://panasonic.net/security/
Printed in Japan (2A-038L)
Simple to configure and easy-to-use Iris Reader with recognition results in 0.3 seconds*
*Time required for recognition in a normal, ready-to-recognize condition after the eyes are aligned with the main unit mirrors.

SYSTEM DIAGRAMS

Network system
Integrates with Wiegand-compatible Systems
Compatible with standard Wiegand interface protocol access control systems thus offering flexible system configuration. Legacy PROX cards are also supported.*
*Most card formats are supported-please check with your local Panasonic sales office. *To handle the protocol, it is necessary to install the BM-ETA201 optional Interface Board

(PAL only).

The BM-ET200 offers more-accurate, faster, non-contact entry/exit control utilizing biometric technology for iris recognition. The system can be used to check IDs in a variety of applications, including airports and entry/exit control for many types of industries.
Maximum system specification
Maximum number of iris readers Local matching 256 units 5,000 users Number of users that can be registered 10,000 users

Card Reader

Fast, high-speed capture engine developed to obtain recognition in only 0.3 seconds
Panasonic developed a unique high-speed capture engine that obtains recognition in only 0.3 seconds after eye position alignment with the mirrors. If recognition is not achieved the first time, the operation is automatically repeated at high prompting speeds.

LAN Connection

Distance indicator
Lighting of the lamp indicates the proper capture distance between the user and the BM-ET200.
Recognition Reader BM-ET200

Access Control Panel

Smart Card
Wiegand Connection RS-485 Connection
Iris Server Recognition Reader BM-ET200

Mirrors (Dual)

Adjusts the eye position when registering or recognizing eyes.

Smart Card Writer

DB Smart Card
Card Reader Access Control Server Electric Lock
Dual-mirror configuration makes eye alignment easy
Eye image capturing cameras
Located behind the mirrors, the camera captures images of the irises.

Administration Software

Card Reader Enrollment Reader BM-ET200 Enrollment Reader BM-ET200

Live indicator

Two mirrors are mounted on the front panel. Eye position is less likely to be out of side to side alignment, making recognition easier. Positioning of either left or right eye is simplified.

The light indicates the current operating condition.

Smart Cards

The iris data on an ID card is compared with the captured image to allow access. Smart cards provide application flexibility and do not require a central database.
*To handle the protocol, it is necessary to install the BM-ETA201 optional Interface Board (PAL only).

Results indicator

The lamp lights when recognition is completed.
Recognition Reader BM-ET330*
Access Control Panel Card Reader

Electric Lock

Distance guide indicator informs the user of proper iris capture distance
To adjust the camera for the most optimal eye distance, both voice instructions and distance indicator lamp guide provide user guidance so the correct capture position is achieved.
Distance Too close Suitable Too far Please move a little closer Number of lighting lamps Voice guidance Please move back a little
*The existing BM-ET330 system can be connected to the BM-ET200 system after
upgrading the management software to BM-ES200A without changing existing data.

Tamper Detection

The tamper protection feature prevents data from being extracted from the system. An audible alarm is triggered via the integrated tamper switches. Alarm signals are also transmitted to the access control system and Administration Server.

Stand alone system

Set up PC

LAN connection

Door control box Recognition Reader BM-ET200 Make contact connection

= 2 , / 3.

Numeric key connection

Numeric key

Voice guidance recognition procedure The camera unit swivels up and down
The angle of the two embedded cameras can be adjusted to accommodate users from 152 cm to 180 cm. Taller users can simply bend over to use the system. Upside limit of

the eye position

5,000 User License Included
Iris data for up to 5,000 users can be registered with the Base Administration Software BMES200A within the network mode. With additional (optional) user licenses, the system can register and manage iris data for up to 10,000 users. Contact Panasonic directly for systems requiring more than 10,000 users. Up to 50 users are included in the stand alone mode.
50 user licenses included in the BM-ET200 in stand alone mode cannot be used in a network mode.
For large and small systems
Flexible registration software supports incremental users. User License Software; BM-EU31000 for 1,000 users or BM-EU35000 for 5,000 users. Easy operation and management from a iris server, all settings, registrations, updates, and information confirmation can be controlled from a PC display.
Capitalize 'Menu' to be consistent with others Environment Setting Menu
High security, with false acceptance rate of 1 in 1.2 million*

Iris recognition uses individual differences in the complex patterns found within the iris of the human eye to Retina authenticate individual identities. Lens Iris Iris recognition is the most precise of all biometric identification systems. The false acceptance rate is so low that the probability of falsely identifying one individual as another is virtually zero.
Speaker on the front panel offers voice guidance for operational assistance and recognition results. Fourteen (14) languages can be selected for each iris reader. Supported languages: English, French, German, Spanish, Italian, Turkish, Arabic, Chinese, Korean, Russian, Portuguese, Dutch, Swedish, and Japanese.
Access log can be searched by time
Using the time of image capture stored in the camera, you can search the access log of a specific user for the specified time.

1,678 mm (66-1/16")

Iris Image Display User Information Menu
Three settings for voice guidance
Simple : Only recognition results are announced. F u l l : Voice guidance such as ''Please move a little closer'' and ''Please move back a little'' and also recognition results are given. M u t e : No voice guidance.
Downside limit of the eye position

APPLICATIONS

Police Prisons Courts Any and all security applications

Iris Characteristics

An extremely complex pattern that differs even between identical twins. Patterns stabilize between six months and two years of age and then remain unchanged for life. They are extremely difficult to imitate.
"RECOGNIZING PERSONS BY THEIR IRIS PATTERNS" by Dr.John Daugman, University of Cambridge.
1,395 mm (54-15/16") 300 mm (11-13/16") 400 mm (15-3/4")

Bottom of camera unit

Offices
Data center, material storage, safes, executive offices, secure meeting rooms
Laboratories and factories Financial institutions

Lifeline facilities

Traffic control centers
Expressway administration centers, railroad dispatcher rooms
Airport and harbor facilities
Staff gates, Immigration, workshops
1,240 mm (48-13/16")
Drug or dangerous materials Safes, safety deposit box rooms Power generator rooms, dam storage rooms, night or holiday management offices, gas entry control company control rooms