Order No. MAC0802014C2

Air Conditioner

CS-TE9HKE-5 CU-TE9HKE-5 CS-TE12HKE-5 CU-TE12HKE-5

TABLE OF CONTENTS

PAGE 1 Safety Precautions----------------------------------------------- Specifications ----------------------------------------------------- 4 2.1. CS-TE9HKE-5 CU-TE9HKE-5 ------------------------ 4 2.2. CS-TE12HKE-5 CU-TE12HKE-5 --------------------- Features ------------------------------------------------------------- Location of Controls and Components ------------------- 9 4.1. Product Overview------------------------------------------ Dimensions--------------------------------------------------------10 5.1. Indoor Unit--------------------------------------------------10 5.2. Outdoor Unit ----------------------------------------------- Refrigeration Cycle Diagram --------------------------------Block Diagram----------------------------------------------------Wiring Connection Diagram --------------------------------14 8.1. Indoor Unit--------------------------------------------------PAGE 8.2. Outdoor Unit----------------------------------------------- 15 Electronic Circuit Diagram----------------------------------- 16 9.1. Indoor Unit ------------------------------------------------- 16 9.2. Outdoor Unit----------------------------------------------- 17 Printed Circuit Board ------------------------------------------ 18 10.1. Indoor Unit ------------------------------------------------- 18 10.2. Outdoor Unit----------------------------------------------- 19 Installation Instruction ---------------------------------------- 20 11.1. Select The Best Location ------------------------------ 20 11.2. Indoor/Outdoor Unit Installation Diagram ---------- 20 11.3. Indoor Unit ------------------------------------------------- 21 11.4. Outdoor Unit----------------------------------------------- 24 Operation and Control ---------------------------------------- 27 12.1. Basic Function -------------------------------------------- 27
2008 Panasonic HA Air-Conditioning (M) Sdn. Bhd. (11969-T). All rights reserved. Unauthorized copying and distribution is a violation of law.
12.2. Airflow Direction ------------------------------------------ 29 12.3. Quiet operation (Cooling Mode/Cooling area of Dry Mode)----------------------------------------------- 29 12.4. Powerful Mode Operation ------------------------------ 30 12.5. ON Timer Control ---------------------------------------- 31 12.6. OFF Timer Control --------------------------------------- 31 12.7. Auto Restart Control------------------------------------- 31 12.8. Indication Panel------------------------------------------- 31 12.9. Ionizer Operation ----------------------------------------- Protection Control ---------------------------------------------- 34 13.1. Protection Control For All Operations--------------- 34 13.2. Protection Control For Cooling & Soft Dry Operation--------------------------------------------------- 35 13.3. Protection Control For Heating Operation --------- Servicing Mode -------------------------------------------------- 37 14.1. Auto OFF/ON Button ------------------------------------ 37
14.2. Select Remote Control Transmission Code------14.3. Remote Control Button --------------------------------Troubleshooting Guide --------------------------------------15.1. Refrigeration Cycle System --------------------------15.2. Breakdown Self Diagnosis Function ---------------15.3. Error Codes Table --------------------------------------Disassembly and Assembly Instructions -------------16.1. Disassembly of Indoor Unit --------------------------16.2. Outdoor Electronic Controller Removal Procedure-------------------------------------------------Technical Data --------------------------------------------------17.1. Operation Characteristics ----------------------------17.2. Sensible Capacity Chart ------------------------------Exploded View and Replacement Parts List----------18.1. Indoor Unit------------------------------------------------18.2. Outdoor Unit ----------------------------------------------

1 Safety Precautions

Read the following SAFETY PRECAUTIONS carefully before perform any servicing. Electrical work must be installed or serviced by a licensed electrician. Be sure to use the correct rating of the power plug and main circuit for the model installed. The caution items stated here must be followed because these important contents are related to safety. The meaning of each indication used is as below. Incorrect installation or servicing due to ignoring of the instruction will cause harm or damage, and the seriousness is classified by the following indications.

This indication shows the possibility of causing death or serious injury. This indication shows the possibility of causing injury or damage to properties.
The items to be followed are classified by the symbols:
This symbol denotes item that is PROHIBITTED from doing.
Carry out test running to confirm that no abnormality occurs after the servicing. Then, explain to user the operation, care and maintenance as stated in instructions. Please remind the customer to keep the operating instructions for future reference.
1. Engage dealer or specialist for installation and servicing. If installation or servicing done by the user is defective, it will cause water leakage, electrical shock or fire. 2. Install according to this installation instructions strictly. If installation is defective, it will cause water leakage, electric shock or fire. 3. Use the attached accessories parts and specified parts for installation and servicing. Otherwise, it will cause the set to fall, water leakage, fire or electrical shock. 4. Install at a strong and firm location which is able to withstand the sets weight. If the strength is not enough or installation is not properly done, the set will drop and cause injury. 5. For electrical work, follow the local national wiring standard, regulation and the installation instruction. An independent circuit and single outlet must be used. If electrical circuit capacity is not enough or defect found in electrical work, it will cause electrical shock or fire. 6. This equipment is strongly recommended to install with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD). Otherwise, it may cause electrical shock and fire in case equipment breakdown or insulation breakdown. 7. Use the specified cable and connect tightly for indoor/outdoor connection. Connect tightly and clamp the cable so that no external force will be acted on the terminal. If connection or fixing is not perfect, it will cause heat-up or fire at the connection. 8. Wire routing must be properly arranged so that control board cover is fixed properly. If control board cover is not fixed perfectly, it will cause heat-up or fire at the connection point of terminal, fire or electrical shock. 9. When carrying out piping connection, take care not to let air substances other than the specified refrigerant go into refrigeration cycle. Otherwise, it will cause lower capacity, abnormal high pressure in the refrigeration cycle, explosive and injury. 10. Do not install outdoor unit near handrail of veranda. When installing air-conditioner unit at veranda of high rise building, child may climb up to outdoor unit and cross over the handrail and causing accident.
11. This equipment must be properly earthed. Earth line must not be connected to gas pipe, water pipe, earth of lightning rod and telephone. Otherwise, it may cause electric shock in case equipment breakdown or insulation breakdown. 12. When connecting the piping, do not allow air or any substances other than the specified refrigerant to enter the refrigeration cycle. Otherwise, this may lower the capacity, cause abnormally high pressure in the refrigeration cycle, and possibly result in explosion and injury. 13. Do not damage or use unspecified power supply cord. Otherwise it will cause fire or electric shock. 14. Do not modify the length of the power supply cord or use extension cord, and do not share the single outlet with other electric appliances. Otherwise, it will cause fire or electric shock. 15. It is desirable that the amount of residual oil is less than 40 mg/10m. Thickness of copper pipes used with R410A must be more than 0.6 mm. Never use copper pipes thinner than 0.6 mm. 16. During installation, before run the compressor, confirm the refrigerant pipes are fixed. Operation of compressor without fixing the piping, setting the valves at open condition, a burst may occur and cause injury. 17. After completion of installation or service, confirm there is no leakage or refrigerant gas. It may generate toxic gas when the refrigerant contacts with fire. 18. Ventilate if there is refrigerant gas leakage during operation. It may cause toxic gas when refrigerant contacts with fire.

ITEM Type Material Motor Type Input Power Fan Output Power Lo (Cool/Heat) Fan Speed Me (Cool/Heat) Hi (Cool/Heat) SHi (Cool/Heat) Fin Material Fin Type Heat Exchanger Row x Stage x FPI Size (W x H x L) Air Filter Material Type
INDOOR UNIT Cross-Flow Fan ASG20K1 or ASG32K1 Transistor (8-pole)
OUTDOOR UNIT Propeller Fan PP Induction (6-pole) 25 770 / Aluminium Corrugated Fin 2 x 24 x 17 36.4 x 504 x

W W rpm rpm rpm rpm

910 / / / / Aluminium (Pre Coat) Slit Fin 2.1 x 11.4 x 23
640 x 304 x 25.4 Polypropelene One-Touch
1. Cooling capacities are based on indoor temperature of 27 C D.B. (80.6 F D.B.), 19.0 C W.B. (66.2 F W.B.) and outdoor air temperature of 35 C D.B. (95 F D.B.), 24 C W.B. (75.2 F W.B.) 2. Heating capacities are based on indoor temperature of 20 C D.B. (68 F D.B.) and outdoor air temperature of 7 C D.B. (44.6 F D.B.), 6 C W.B. (42.8 F W.B.)
Item Power Source (Phase, Voltage, Cycle) Unit V Hz Input Power Starting Current Running Current Maximum current Power Factor W A A A % Single Cooling; 570 (175 ~ 730) Heating; 870 (165 ~ 1.15k) 4.0 Cooling; 2.6 Heating; 4.0 5.3 Cooling; 95 Heating; (1.0mm) m (ft) 1.5 (5) Electrical kWh 285
Power factor means total figure of compressor, indoor fan motor and outdoor fan motor. Power Cord Thermostat Protection Device Annual Consumption Number of core Length
Note Specifications are subject to change without notice for further improvement.
CS-TE12HKE-5 CU-TE12HKE-5
ITEM UNIT kW INDOOR UNIT EUROVENT 3.50 (0.80 ~ 4.00) 3010 (690 ~ 3440) 11900 (2730 ~ 13600) 3.68 (4.32 ~ 3.42) 3.17 (3.73 ~ 2.94) 42/29/4.20 (0.80 ~ 5.50) 3610 (690 ~ 4730) 14300 (2730 ~ 18800) 3.96 (4.57 ~ 3.67) 3.41 (3.94 ~ 3.15) 42/33/2.0 4.2 Cooling; 5.4 (191) Heating; 7.3 (258) Cooling; 8.1 (215) Heating; 8.2 (290) Cooling; 9.0 (318) Heating; 9.7 (342) Cooling; 9.9 (350) Heating; 11.2 (400) cm Height

OUTDOOR UNIT

Performance Test Condition C Capacity O O L I EER N G Noise Level kCal/h Btu/h W/W kCal/hW dB-A (H/L/Q-Lo) Power level dB kW H Capacity E A T I COP N G Noise Level Moisture Removal Q-Lo Lo Air Volume Me Hi Refrigeration Control Device Refrigeration Oil Refrigerant (R410A) Dimension Net Weight Pipe Diameter Standard Length Pipe Length Range Height Difference Additional Gas Amount Refrigeration Charge Less Drain Hose Inner Diameter Length Type Compressor Motor Type Rated Output Type Material Motor Type Input Power Fan Output Power Lo (Cool/Heat) Fan Speed Me (Cool/Heat) Hi (Cool/Heat) SHi (Cool/Heat) W W rpm rpm rpm rpm W Gas Liquid Width Depth m3/min (ft3/min) m3/min (ft3/min) kCal/h Btu/h W/W Btu/hW dB-A (H/L/Q-Lo) Power level dB l/h pt/h m3/min (ft3/min) m3/min (ft3/min)

High 48 61

High 50 63
Cooling; 31.0 (1090) Heating; 31.0 (1090) Expansion Valve RB68A or Freol Alpha68M (320) 1.04k (36.7) 540 (21-9/32) 780 (30-23/32) 289 (11-13/32) 34 (75) 12.7 (1/2) 6.35 (1/4) 7.5 (24.6)

11.4.1. INSTALL THE OUTDOOR UNIT
After selecting the best location, start installation according to Indoor/Outdoor Unit Installation Diagram. 1. Fix the unit on concrete or rigid frame firmly and horizontally by bolt nut (10 mm). 2. When installing at roof, please consider strong wind and earthquake. Please fasten the installation stand firmly with bolt or nails.
Model TE9HKE-5, TE12HKE-5

A 570mm

B 105mm

C 18.5mm

D 320mm

11.4.2.

CONNECTING THE PIPING
Connecting The Piping To Indoor Unit Please make flare after inserting flare nut (locate at joint portion of tube assembly) onto the copper pipe (in case of using long piping). Connect the piping Align the center of piping and sufficiently tighten the flare nut with fingers. Further tighten the flare nut with torque wrench in specified torque as stated in the table.
Model TE9HKE-5 TE12HKE-5 Piping size (Torque) Gas 3/8 [42 N m] 1/2 [55 N m] Liquid 1/4 [18 N m) 1/4 [18 N m)
Do not over tighten, over tightening cause gas leakage.
Connecting The Piping To Outdoor Unit Decide piping length and then cut by using pipe cutter. Remove burrs from cut edge. Make flare after inserting the flare nut (locate at valve) onto the copper pipe. Align center of piping to valves and then tighten with torque wrench to the specified torque as stated in the table. CUTTING AND FLARING THE PIPING 1. Please cut using pipe cutter and then remove the burrs. 2. Remove the burrs by using reamer. If burrs is not removed, gas leakage may be caused. Turn the piping end down to avoid the metal powder entering the pipe. 3. Please make flare after inserting the flare nut onto the copper pipes.

11.4.3.

EVACUATION OF THE EQUIPMENT
WHEN INSTALLING AN AIR CONDITIONER, BE SURE TO EVACUATE THE AIR INSIDE THE INDOOR UNIT AND PIPES in the following procedure.
1. Connect a charging hose with a push pin to the Low side of a charging set and the service port of the 3-way valve. Be sure to connect the end of the charging hose with the push pin to the service port. 2. Connect the center hose of the charging set to a vacuum pump with check valve, or vacuum pump and vacuum pump adaptor. 3. Turn on the power switch of the vacuum pump and make sure that the needle in the gauge moves from 0 cmHg (0 MPa) to -76 cmHg (-0.1 MPa). Then evacuate the air approximately ten minutes. 4. Close the Low side valve of the charging set and turn off the vacuum pump. Make sure that the needle in the gauge does not move after approximately five minutes. Note: BE SURE TO FOLLOW THIS PROCEDURE IN ORDER TO AVOID REFRIGERANT GAS LEAKAGE. 5. Disconnect the charging hose from the vacuum pump and from the service port of the 3-way valve. 6. Tighten the service port caps of the 3-way valve at a torque of 18 N m with a torque wrench. 7. Remove the valve caps of both of the 2-way valve and 3-way valve. Position both of the valves to OPEN using a hexagonal wrench (4 mm). 8. Mount valve caps onto the 2-way valve and the 3-way valve. Be sure to check for gas leakage.

12.1.3. Soft Dry Operation 12.1.3.1. Thermostat control
Compressor is OFF when Intake Air Temperature - Internal Setting Temperature < -2 C. Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature > Compressor OFF point +0.5 C.
12.1.4. Heating Operation 12.1.4.1. Thermostat control
Compressor is OFF when Intake Air Temperature - Internal Setting Temperature > +1.5 C. Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature < Compressor OFF point -0.5 C.
12.1.5. Automatic Operation
This mode can be set using remote control and the operation is decided by remote control setting temperature, remote control operation mode, indoor intake air temperature and outdoor air temperature. During operation mode judgment, indoor fan motor (with speed of Lo-) and outdoor fan motor are running for 30 seconds to detect the indoor intake and outdoor air temperature. The operation mode is decided based on below chart.
Every 30 minutes, the indoor and outdoor temperature is judged. Based on remote control setting temperature, the value of T1 will increase up to 10 C, T2 will decreased by 3 C and T3 will decreased up to 8 C. The Auto Operation Mode shifting will take place whenever operation mode changed from Cooling/Soft Dry to Heating or vice versa.
12.1.6. Indoor Fan Motor Operation
A. Basic Rotation Speed (rpm) i. Manual Fan Speed [Cooling, Dry] Fan motors number of rotation is determined according to remote control setting.
Remote Control Tab O Hi O Me+ O Me O MeO Lo O QLo
[Heating] Fan motors number of rotation is determined according to remote control setting.
Remote Control Tab O SHi O Me+ O Me O MeO Lo O QLo
ii. Auto Fan Speed [Cooling, Dry] According to room temperature and setting temperature, indoor fan speed is determined automatically. The indoor fan will operate according to pattern below.
[Heating] According to indoor pipe temperature, automatic heating fan speed is determined automatically. B. Feedback control Immediately after the fan motor started, feedback control is performed once every second. During fan motor on, if fan motor feedback 2550 rpm or < 50 rpm continue for 10 seconds, then fan motor error counter increase, fan motor is then stop and restart. If the fan motor counter becomes 7 times, then H19 - fan motor error is detected. Operation stops and cannot on back.
12.1.7. Outdoor Fan Motor Operation
Outdoor fan motor is operated with one fan speed only. It starts when compressor starts operation and it stops 30 seconds after compressor stops operation.

12.2. Airflow Direction

1. There are two types of airflow, vertical airflow (directed by horizontal vane) and horizontal airflow (directed by vertical vanes). 2. Control of airflow direction can be automatic (angles of direction is determined by operation mode, heat exchanger temperature and intake air temperature) and manual (angles of direction can be adjusted using remote control).

12.2.1. Vertical Airflow

Operation Mode Heating Airflow Direction 1 Auto with Heat Exchanger Temperature A B C Manual Cooling and e-ion Soft Dry Auto Manual Auto Manual 2 Vane Angle ( ) ~ 4 5
1. Automatic vertical airflow direction can be set using remote control; the vane swings up and down within the angles as stated above. For heating mode operation, the angle of the vane depands on the indoor heat exchanger temperature as Figure 1 below. When the air conditioner is stopped using remote control, the vane will shift to close position. 2. Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above and the positions of the vane are as Figure 2 below. When the air conditioner is stopped using remote control, the vane will shift to close position.
12.2.2. Horizontal Airflow
The horizontal airflow direction louvers can be adjusted manually by hand.
12.3. Quiet operation (Cooling Mode/Cooling area of Dry Mode)
A. Purpose To provide quiet cooling operation compare to normal operation. B. Control condition a. Quiet operation start condition When quiet button at remote control is pressed. Quiet LED illuminates.
b. Quiet operation stop condition 1. When one of the following conditions is satisfied, quiet operation stops: a.Powerful button is pressed. b.Stop by OFF/ON switch. c.Timer off activates. d.Quiet button is pressed again. 2. When quiet operation is stopped, operation is shifted to normal operation with previous setting. 3. When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed. 4. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, except ion only operation. 5. During quiet operation, if timer on activates, quiet operation maintains. 6. After off, when on back, quiet operation is not memorised. C. Control contents 1. Auto fan speed is changed from normal setting to quiet setting of respective fan speed. This is to reduce sound of Hi, Me, Lo for 3dB. 2. Manual fan speed for quiet operation is -1 step from setting fan speed.
12.3.1. Quiet operation (Heating)
A. Purpose To provide quiet heating operation compare to normal operation. B. Control condition a. Quiet operation start condition When quiet button at remote control is pressed. Quiet LED illuminates. b. Quiet operation stop condition 1. When one of the following conditions is satisfied, quiet operation stops: a. Powerful button is pressed. b. Stop by OFF/ON switch. c. Timer off activates. d. Quiet button is pressed again. 2. When quiet operation is stopped, operation is shifted to normal operation with previous setting. 3. When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed. 4. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, expected ion only operation. 5. During quiet operation, if timer on activates, quiet operation maintains. 6. After off, when on back, quiet operation is not memorised. C. Control contents a. Fan speed auto 1. Indoor FM RPM depends on pipe temp sensor of indoor heat exchanger. Auto fan speed is changed from normal setting to quiet setting of respective fan speed. This is to reduce sound of Hi, Me, Lo for 3dB. b. Fan speed manual 1. Manual fan speed for quiet operation is -1 step from setting fan speed.

12.4. Powerful Mode Operation
A. Purpose To achieve the setting temperature quickly. B. Control Condition a. Powerful operation start condition When the powerful button at remote control is pressed, Powerful LED illuminates b. Powerful operation stop condition 1. When one of the following conditions is satisfied, quiet operation stops: a. Powerful button is pressed again b. Quiet button is pressed c. Stop by OFF/ON switch d. Timer OFF is pressed again 30
2. When Powerful operation is stopped, operation is shifted to normal operation. C. Control Contents a. Fan speed 1. Indoor fan speed depends on indoor intake temperature and remote control setting temperature. Fan speed is changed from normal setting to Powerful setting of respective fan speed. b. Temperature shifting 1. Internal setting temperature shift depends on indoor pipe temperature. Temperature is decreased (Cooling and Soft Dry operation) or increased (Heating operation) accordingly.

12.5. ON Timer Control

ON timer can be set using remote control, the unit with timer set will start operate earlier than the setting time. This is to provide a comfortable environment when reaching the set ON time. 70 minutes before the set time, indoor (at fan speed of Lo-) and outdoor fan motor start operate for 30 seconds to determine the indoor intake air temperature and outdoor air temperature in order to judge the operation starting time. From the judgment, the decided operation will start operate earlier than the set time as shown below.

12.6. OFF Timer Control

OFF timer can be set using remote control, the unit with timer set will stop operate at set time.
12.7. Auto Restart Control
1. When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within three to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be selected randomly) after power supply resumes. 2. This type of control is not applicable during ON/OFF Timer setting.

12.8. Indication Panel

LED Color Light ON Light OFF POWER Green Operation ON Operation OFF TIMER Orange Quiet Setting ON Quiet Setting OFF Ion Blue Ion ON Ion OFF
Note: If POWER LED is blinking, the possible operations of the unit are Hot Start, during Deice operation, operation mode judgement, or ON timer sampling. If Timer LED is blinking, there is an abnormality operation occurs.

12.9. Ionizer Operation

Purpose To provide fresh air effect to users by discharging minus ion to air. Control Condition

13.2.3. Dew Prevention Control
1. To prevent dew formation at indoor unit discharge area. 2. This control will be activated if: Outdoor air temperature and Indoor temperature judgment by microcontroller is fulfilled. When Cooling or Dry mode is operated more than 30 minutes or more. 3. This control stopped if: Compressor stopped. Remote control setting changed (fan speed / temperature). Outdoor air temperature and indoor intake temperature changed. 4. Fan speed will be adjusted accordingly in this control.
13.2.4. Freeze Prevention Control
1. 2. 3. 4. When indoor heat exchanger temperature is lower than 0 C continuously for six minutes, compressor will stop operating. Compressor will resume its operation 3 minutes after the indoor heat exchanger is higher than 7 C. At the same time, indoor fan speed will be higher than during its normal operation. If indoor heat exchanger temperature is higher than 7 C for five minutes, the fan speed will return to its normal operation.
13.3. Protection Control For Heating Operation
13.3.1. Intake Air Temperature Control
Compressor will operate at Max frequency if below condition occur: 1. When the indoor intake air temperature is 30 C or above.
13.3.2. Outdoor Air Temperature Control
The maximum current value is regulated when the outdoor air temperature rises above 16 C in order to avoid compressor overloading.
13.3.3. Overload Protection Control
The compressor operating frequency is regulated in accordance to indoor heat exchanger temperature as shown in below figures.
13.3.4. Cold Draught Operation
When indoor pipe temperature is low, cold draught operation start where indoor fan speed will be reduced.

13.3.5. Deice Operation

When outdoor pipe temperature and outdoor temperature is low, deice operation start where indoor fan motor and outdoor fan motor stop and operation LED blinks.

14 Servicing Mode

14.1. Auto OFF/ON Button
1. AUTO OPERATION MODE The Auto operation will be activated immediately once the Auto OFF/ON button is pressed. This operation can be used to operate air conditioner with limited function if remote control is misplaced or malfunction. 2. TEST RUN OPERATION (FOR PUMP DOWN/SERVICING PURPOSE) The Test Run operation will be activated if the Auto OFF/ON button is pressed continuously for more than 5 seconds. A beep sound will occur at the fifth seconds, in order to identify the starting of Test Run operation (Forced cooling operation). Within 5 minutes after Forced cooling operation start, the Auto OFF/ON button is pressed for more than 5 seconds. A 2 beep sounds will occur at the fifth seconds, in order to identify the starting of Forced heating operation. The Auto OFF/ON button may be used together with remote control to set / change the advance setting of air conditioner operation.

3. REMOTE CONTROL NUMBER SWITCH MODE The Remote Control Number Switch Mode will be activated if the Auto OFF/ON button is pressed continuously for more than 11 seconds (3 beep sounds will occur at 11th seconds to identify the Remote Control Number Switch Mode is in standby condition) and press any button at remote control to transmit and store the desired transmission code to the EEPROM. For transmission code selection explanation, please refer to Select Remote Control Transmission Code. 4. REMOTE CONTROL RECEIVING SOUND OFF/ON MODE The Remote Control Receiving Sound OFF/ON Mode will be activated if the Auto OFF/ON button is pressed continuously for more than 16 seconds (4 beep sounds will occur at 16th seconds to identify the Remote Control Receiving Sound Off/On Mode is in standby condition) and press AC Reset button and then press Check button at remote control. Press Auto OFF/ON button to toggle remote control receiving sound. - Short beep: Turn OFF remote control receiving sound. - Long beep: Turn ON remote control receiving sound. After Auto OFF/ON Button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON Mode is restarted.
14.2. Select Remote Control Transmission Code
There are 4 types of remote control transmission code could be selected and stored in EEPROM of indoor unit. The indoor unit will only operate when received signal with same transmission code from remote control. This could prevent signal interference when there are 2 or more indoor units installed nearby together. To change remote control transmission code, short or open jumpers at the remote control printed circuit board.
Remote Control Printed Circuit Board Jumper A (J-A) Jumper B (J-B) Remote Control No. Short Open A (Default) Open Open B Short Short C Open Short D
14.3. Remote Control Button

14.3.1. SET BUTTON

To check current remote control transmission code - Press for more than 10 seconds. To change the air quality sensor sensitivity - Press and release with pointer. - Press the Timer Decrement button to select sensitivity: 1. Low Sensitivity 2. Standard (Default) 3. Hi Sensitivity - Confirm setting by pressing Timer Set button, a Beep sound will be heard. LCD returns to original display after 2 seconds. - LCD returns to original display if remote control does not operate for 30 seconds.

14.3.2. CLOCK BUTTON

To change the remote controls time format - Press for more than 5 seconds.

14.3.3. RESET (RC)

To clear and restore the remote control setting to factory default - Press once to clear the memory.

14.3.4. RESET (AC)

To restore the units setting to factory default - Press once to restore the units setting.

14.3.5. TIMER

To change indoor unit indicators LED intensity - Press continuously for 5 seconds.

Error Code H23 H27, H28

Operation Cooling Cooling, Heating
Temporary items Emergency Operation with limited power

15.3. Error Codes Table

Diagnosis display H11 H14 H15 H16 H19 H23 H26 H27 H28 Abnormality / Protection control Indoor / outdoor abnormal communication Indoor intake air temperature sensor abnormality Outdoor compressor temperature sensor abnormality Outdoor Current Transformer open circuit Indoor fan motor merchanism lock Indoor heat exchanger temperature sensor abnormality Ionizer abnormality Outdoor air temperature sensor abnormality Outdoor heat exchanger temperature sensor abnormality Indoor/Outdoor wrong connection Outdoor Fan Motor lock abnormality Indoor high pressure protection Indoor heat exchanger anti-freezing protection Cooling / Heating cycle changeover abnormality Refrigeration cycle abnormal Outdoor compressor abnormal revolution Cool high pressure protection IPM (power transistor) overheating protection Outdoor compressor overheating protection Total running current protection Outdoor Direct Current (DC) peak detection Abnormality Judgement > 1 min after starting operation Continue for 5 sec. Continue for 5 sec. Continue for 5 sec. Continue for 5 sec. Emergency operation Indoor fan operation only O (Cooling only) O O Primary location to verify Internal / external cable connections Indoor / Outdoor PCB Intake air temperature sensor (detective or disconnected) Compressor temperature sensor (detective or disconnected) Outdoor PCB IPM (Power transistor) module Indoor PCB Fan motor Heat exchanger temperature sensor (defective or disconnected) Indoor PCB Ionizer Outdoor temperature sensor (defective or disconnected) Outdoor heat exchanger temperature sensor (defective or disconnected) Indoor/Outdoor supply voltage Outdoor PCB Outdoor Fan Motor Air filter dirty Air circulation short circuit Insufficient refrigerant Air filter dirty 4-way valve V-coil No refrigerant (3-way valve is closed) Outdoor compressor Outdoor refrigerant circuit Excess refrigerant Improper heat radiation IPM (Power transistor) Insufficient refrigerant Compressor Excess refrigerant Improper heat radiation Outdoor PCB IPM (Power transistor) Compressor
H33 H97 H98 H99 F11 F91 F93 F95 F96
4 times occurance within 30 minutes 2 times occurance within 20 minutes 4 times occurance within 20 minutes 4 times occurance within 20 minutes

F97 F98 F99

4 times occurance within 10 minutes 3 times occurance within 20 minutes 7 times occurance continuously
Note: O - Frequency measured and fan speed fixed. The memory data of error code is erased when the power supply is cut off, or press the Auto Switch until beep sound heard following by pressing the RESET button at remote controller. Although operation forced to stop when abnormality detected, emergency operation is possible for certain errors (refer to Error Codes Table) by using remote controller or Auto Switch at indoor unit. However, the remote controller signal receiving sound is changed from one beep to four beep sounds.

16 Disassembly and Assembly Instructions
High voltages are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
16.1. Disassembly of Indoor Unit
16.1.1. Removal of the Front Panel and Front Grille.
16.1.2. Removal of Electronic Controller
16.1.3. Removal of Control Board
16.1.4. Removal of Fan Motor and Cross-Flow Fan
16.2. Outdoor Electronic Controller Removal Procedure
Caution! When handling electronic controller, be careful of electrostatic discharge. 1. Remove the 3 screws of the Top Panel. 5. Remove the Control Board as follows:

Fig. 1

Fig. 4
2. Remove the 6 screws of the Front Panel.

Fig. 2

3. Remove the screw of the Terminal Board Cover. 4. Remove the Top Cover of the Control Board by 4 hooks.

Fig. 5

Fig. 6

Fig. 3

17 Technical Data
17.1. Operation Characteristics
17.1.1. CS-TE9HKE-5 CU-TE9HKE-5
17.1.2. CS-TE12HKE-5 CU-TE12HKE-5
17.2. Sensible Capacity Chart

CS-TE9HKE-5 CU-TE9HKE-5

230V Indoor wet bulb temp. 17.0 C 19.0 C 19.5 C 22.0 C 2.72 2.97 1.97 2.04 0.53 0.TC 2.48 SHC 1.88 IP 0.52 TC 2.32 2.50 2.55 2.77 1.89 1.SHC 1.80 IP 0.56 0.57 0.57 0.58 2.37 2.58 1.82 1.89 0.61 0.62 2.15 2.35 1.73 1.81 0.66 0.67 TC 2.16 Outdoor Temp. ( C) 40 SHC 1.73 IP 0.60 TC 1.SHC 1.65 IP 065
230V Indoor wet bulb temp. 17.0 C 19.0 C 19.5 C 22.0 C 3.81 4.15 2.76 2.86 0.89 0.TC 3.47 SHC 2.63 IP 0.87 TC 3.24 3.50 3.56 3.88 2.65 2.SHC 2.52 IP 0.94 0.95 0.95 0.97 3.31 3.61 2.55 2.65 1.02 1.04 3.01 3.28 2.43 2.53 1.10 1.12 TC 3.02 Outdoor Temp. ( C) 40 SHC 2.43 IP 1.00 TC 2.SHC 2.30 IP 1.08
TC - Total Cooling Capacity (kW) SHC - Sensible Heat Capacity (kW) - Input Power (kW) IP Indoor 27 C/19 C Outdoor 35 C/24 C
18 Exploded View and Replacement Parts List

18.1. Indoor Unit

Note The above exploded view is for the purpose of parts disassembly and replacement. The non-numbered parts are not kept as standard service parts.

REF. NO. 45

PART NAME & DESCRIPTION CHASSY COMPLETE INSTALLATION PLATE BACK COVER CHASSIS FAN MOTOR CROSS FLOW FAN COMPLETE SCREW - CROSS FLOW FAN BEARING ASSY DISCHARGE GRILLE COMPLETE HORIZONTAL VANE HORIZONTAL VANE COMPLETE (R) HORIZONTAL VANE COMPLETE (L) FULCRUM CAP (DRAIN CAP) AIR SWING MOTOR LEADWIRE FOR AIR SWING MOTOR DRAIN HOSE CONTROL BOARD CASING TERMINAL BOARD COMPLETE DISPLAY PCB HOLDER ELECTRONIC CONTROLLER - RECEIVER, INDICATOR POWER SUPPLY CORD ELECTRONIC CONTROLLER - MAIN CONTROL COVER (LOWER) CONTROL COVER (PLASTIC PLATE - UPPER) CONTROL COVER (STEEL PLATE - UPPER) GEAR (FRONT PANEL OPEN/CLOSE MOTOR) FRONT PANEL OPEN/CLOSE MOTOR SENSOR HOLDER (PIPE TEMP) ELECTRONIC CONTROLLER - IONIZER ION GENERATOR FRONT GRILLE COMPLETE INTAKE GRILLE GRILLE DOOR SCREW FRONT GRILLE CAP AIR FILTER EVAPORATOR COMPLETE (WITH PIPE) FLARE NUT (1/4) EVAPORATOR HOLDER FLARE NUT (3/8) (1/2) REMOTE CONTROL COMPLETE SUPER ALLERU BUSTER FILTER OPERATION INSTRUCTION INSTALLATION INSTRUCTION INSTALLATION INSTRUCTION

QTY. 1

CS-TE9HKE-5 CWD50C1558 CWH361074 CWD911465A CWA981195CB CWH02K1029 CWH551146 CWH64K1005 CWE20C2754 CWE24C1115 CWE24C1221 CWE24C1222 CWH621050A CWH521091 CWA981106J CWA67C5265 CWH851110 CWH102280 CWA28C2233 CWD932475 CWA743634 CWA20C2679 CWA73C3236 CWH131229 CWH131232 CWH131230 CWH68C1023 L6JAEDJH0001 CWH32137 CWA73C1791 CWH94C0005 CWE11C4072 CWE22C1450 CWE141028 XTT4 + 16CFJ CWH521025E CWD001149 CWB30C1608 CWT25086 CWD661048 CWT251031 CWA75C3196 CWD00C1263 CWF565950 CWF613400 CWF613401

CS-TE12HKE

REMARKS

CWB30C1706

CWT251032 O
(NOTE) All parts are supplied from PHAAM, Malaysia (Vendor Code: 061). O marked parts are recommended to be kept in stock.

18.2. Outdoor Unit

REF. NO. 41 CHASSY ASSY
PART NAME & DESCRIPTION FAN MOTOR BRACKET FAN MOTOR, AC 25W SINGLE PROPELLER FAN ASSY NUT - PROPELLER FAN COMPRESSOR NUT - COMPRESSOR MOUNT CONDENSOR CO. STRAINER TUBE ASSY (EXP.VALVE) 4-WAYS VALVE 3-WAYS VALVE (GAS) HOLDER COUPLING DISCHARGE MUFFLER 2-WAYS VALVE (LIQUID) V-COIL COMPLETE V-COIL COMPLETE FOR EXP.VALVE SOUND PROOF BOARD REACTOR SOUND PROOF MATERIAL SOUND PROOF MATERIAL SENSOR - COMPLETE ELECTRONIC CONTROLLER-MAIN CONTROL BOARD COVER (TOP-PCB) TERMINAL BOARD ASSY SENSOR COMPLETE TERMINAL COVER CABINET SIDE PLATE-COMPLETE CABINET SIDE PLATE (L) HANDLE WIRE NET CABINET FRONT PLATE CO. CABINET TOP PLATE PLATE - C.B.COVER CONTROL BOARD COVER COMP. L.TUBE PACKING - L.TUBE OVER HEAT PROTECTOR COMPLETE ANTI-VIBRATION BUSHING CRANK CASE HEATER SOUND PROOF MATERIAL
CU-TE9HKE-5 CWD50K2073 CWD541030 CWA951553 CWH03K1010 CWH56053J 5RS102XBC01 CWH56000J CWB32C2456 CWB11094 CWT01C4434 CWB001037J CWB011374 CWH351023 CWB121010 CWB021301 CWA43C2143J CWA43C2058J CWH151172 G0C193J00003 CWG302315 CWG302316 CWA50C2205 CWA73C3232R CWH131264 CWA28K1021J CWA50C2391 CWH171039A CWE04C1159 CWE041248A CWE161010 CWD041111A CWE06C1136 CWE031014A CWH131301 CWH13C1064 CWH5850080 CWB81012 CWA14C1013 CWH50077 CWA341049 CWG302314

CU-TE12HKE-5

CWA951542

O CWB011367 O

O O O G0C193J00004 O

CWA73C3233R

[PHAAM] Printed in Malaysia SFBZ0208-00

* CS-E7/E9LKR: In the Quiet Mode during heating/cooling operation with low fan speed. CS-E12LKR: In the Quiet Mode during cooling operation with low fan speed.
Noise is 5dB quieter than during regular operation.
* CU-E15LKR: In the Quiet Mode during cooling/heating operation with low fan speed.
As quiet as the sound of leaves on a tree

As quiet as a library

ADVANCED FEATURES
In 2009 Panasonic was awarded the highly coveted Good Design Award which is a comprehensive program for the evaluation and encouragement of design organized by Japan Industrial Design Promotion Organization (JIDPO).
Self-adjusts compressors rotational speed to deliver cost-efficient, energy-saving performance at all times.

IN JAPAN

Responds intuitively to the level of human presence and activity in the room to adjust coolness for maximum comfort and maximum savings.
Alerts you to changes in the degree of air cleanliness and activates the air purifying function for cleaner, healthier air.

INTELLIGENCE

by design
Nature is never wasteful and always strives to achieve perfect balance. These are two aspects of Nature that have inspired the design of Panasonics new range of air conditioners. Not only have we adopted Natures gentle, flowing curves, but we have also emulated its intuitive intelligence by using minimal energy to assure you of a consistent supply of clean and healthy air.
ENERGY-SAVING PERFORMANCE
More Precise Temperature Control
An Intelligent Inverter air conditioner varies its power output to maintain the temperature more precisely. By contrast, a non-Inverter model maintains the temperature by switching the compressor ON and OFF more electricity is used and temperature is uneven!

Optimum Performance

Thanks to a wider power output range, the Intelligent Inverter can vary its cooling power to meet different room occupancy levels. By adjusting the compressor's rotation performance to provide optimum speed at all times, it is able to achieve and maintain the
Even Wider Output Power Range

Minimum power

Medium power

Maximum power

Performance Comparison Using Cars as an Analogy

Uncomfortable

Reaches the comfortable zone quickly.
Changes gears to run more efficiently.
Temperature stays comfortable throughout.
set temperature more cost-efficiently than a non-Inverter.
Graph shows the CS-E18LKR Inverter model's wide power output range during cooling

Room Temperature

Inverter model air conditioner

Comfortable

Non-Inverter model air conditioner

Quick Comfort

As soon as an Inverter air conditioner is switched on, it provides the exact amount of power needed to rapidly cool or heat the room. This enables it to heat a room 4 times faster, and cool a room 1.5 times faster, than non-inverter models. So youre comfortable soon after you arrive home on a hot summer day, or on a cold winter morning.
Runs at a fixed speed, so it takes a longer time to reach the comfort zone.
The room gets too cold, then too warm.
Power cannot be adjusted, so you spend more time to get comfortable, then soon become uncomfortable.
Image of output power fluctuation
Comparison of Heating Speed
Comparison of Cooling Speed

Inverter model

Starting Temperature
Outstanding performance and energy savings
The exceptional energy-saving performance of Panasonic Intelligent Inverter air conditioners ranks as one of the industrys top class of energy-savers. The secret lies in its precision control. After reaching the set temperature, an Intelligent Inverter air conditioner continually adjusts compressor rotation speed to operate with minimum power giving you up to 50% energy savings during cooling operation, and 64% energy savings during heating operation. By contrast, a non-Inverter unit operates on an ON-OFF cycle to maintain the temperature so it uses twice as much electricity.

Set Temperature

times faster

4* times faster

Non-Inverter (2009 model)
* Comparison of CS-E9LKR Inverter Vs non-Inverter models during heating.
* Comparison of CS-E12LKR Inverter Vs non-Inverter models during cooling.

During Heating

Non-Inverter

During Cooling

Providing outstanding cold climate performance, Panasonic Air Conditioners let you enjoy stable heating even when the outside temperature is below freezing. Add to this exceptional durability and reliability and youre looking at worry-free operation for round-the-clock comfort during the harsh winter.
INVERTER SINGLE-SPLIT TYPE | WALL-MOUNTED

Specifications

Cooling Heating ( ): Outdoor Unit EER : Cooling Efficiency COP: Heating Efficiency

E-series

Model No. (240V)
Cooling Capacity Heating Capacity*2 kW Btu/h
Air Flow Dehumid Running Power Current Input L/s L/h A kW
CS-E7LKR (CU-E7LKR) 2.05 6,990 (0.70~2.40) (2,390~8,180) 2.80 9,550 (0.70~4.10) (2,390~13,980) 2.60 8,870 (0.80~3.00) (2,730~10,200) 3.60 12,300 (0.80~5.00) (2,730~17,100) 3.50 11,900 (0.80~4.00) (2,730~13,600) 4.90 16,700 (0.80~6.70) (2,730~22,800) 4.40 15,000 (0.90~5.00) (3,070~17,100) 5.50 18,800 (0.90~7.10) (3,070~24,200) 5.30 18,100 (0.90~6.00) (3,070~20,500) 6.35 21,700 (0.90~8.00) (3,070~27,300) 6.30 21,500 (0.90~7.10) (3,070~24,200) 7.20 24,600 (0.90~8.50) (3,070~29,000) 1.3 2.2 2.8
Pipe Pipe Length EER Star Sound Pressure Sound Net Weight Dimensions Refrigerant Pipe Extension for Additional Additional Power Operating Range (outdoor) Gas Power COP Rating Level*1 dB (A) Level dB (A) Height x Width x Depth Diameter Length Gas Amount Supply Cooling Heating Inside Outside Outside Liquid Side Gas Side Min~Max W/W kg mm m g/m Degree (C) (Hi/Lo/S-Lo) (Hi/S-Lo) (Hi/S-Lo) mm mm (m) (inch) (inch)

CS-E7LKR

CU-E7LKR/E9LKR/E12LKR
0.46 (0.17~0.59) 4.46 4.52 0.62 (0.16~1.05) 0.58 (0.175~0.78) 4.48 4.50 0.80 (0.165~1.36) 0.88 (0.185~1.20) 3.98 3.89 1.26 (0.175~1.89) 1.27 (0.215~1.60) 3.46 3.74 1.47 (0.245~2.25) 1.49 (0.215~2.05) 3.56 3.76 1.69 (0.245~2.65) 2.04 (0.215~2.40) 3.09 3.64 1.98 (0.245~2.70) 2.36 (0.35~2.70) 3.18 3.45 2.49 (0.36~2.54) 2.65 (0.35~2.95) 3.02 2.95 3.25 (0.36~3.79)

3.5 4.0

37/24/21 38/25/21

45/ 46/

60/ 61/

9 (33)

Pipe Length EER Star Sound Pressure Sound Net Weight Dimensions Refrigerant Pipe Pipe for Additional Additional Power Operating Range (outdoor) Gas Power Extension COP Rating Level*1 dB (A) Level dB (A) Height x Width x Depth Diameter Length Gas Amount Supply Cooling Heating Inside Outside Outside Liquid Side Gas Side Min~Max W/W mm m g/m Degree (C) (Hi/Lo/S-Lo) (Hi/S-Lo) (Hi/S-Lo) kg mm mm (m) (inch) (inch)
2.50 8,500 (0.80~3.00) (2,700~10,200) CS-E9GFEW (CU-E9GFE-1) 3.60 12,300 (0.80~5.00) (2,700~17,100) CS-E12GFEW (CU-E12GFR) 3.40 11,600 (0.80~3.80) (2,730~13,000) 4.40 15,000 (0.80~5.40) (2,730~18,400) 5.00 17,100 (0.90~5.60) (3,070~19,100) 5.60 19,100 (0.90~6.50) (3,070~22,200)

155 160

0.57 2.65 (0.175~0.78) 4.39 3.90 4.16 0.865 (0.165~1.36) 3.8 4.9 0.86 (0.185~1.14) 3.95 4.04 1.09 (0.175~1.42) 1.55 (0.255~1.91) 3.23 3.73 1.50 (0.26~1.73)

38/27/23 38/27/23

14 (34)
600 x 700 x 210 (540 x 780 x 289)

158 167

39/28/24 39/27/23

63/ 65/

14 (35)

CS-E18GFEW (CU-E18GFR)

183 217

6.5 6.6

44/36/32 46/36/32

47/ 48/

61/ 62/

14 (49)

600 x 700 x 210 (750 x 875 x 345)
*1 Sound Pressure Level is measured according to JIS C 9612.
Comfortable up-down bidirectional airflow warms the entire room down to your toes
Upper & Lower Vane Blow
Optimum air flow from the top and bottom of the unit assures that even your feet are kept comfortably warm. (Only during heating)
Upward and downward air flow warms the whole room uniformly.
Compatible with Multi System
You can use the unit with up to 3 other indoor units, minimizing the space required for outdoor units.
* Compatible outdoor units CU-4E27CBPG
Upward air flow efficiently cools the entire room.
The indoor and outdoor units deliver quiet operation. And pressing the Quiet mode button lowers operation noise even further to just 23dB for indoor unit with low fan speed.

Compact Design

The design features a flat, elegant front panel that provides a neat appearance. And the unit can be recessed into a wall up to 95 mm.
*1 CS-E9GFEW : In the Quiet mode during cooling/heating operation with low fan speed CS-E12GFEW: In the Quiet mode during heating operation with low fan speed Star Rating (Heating) Star Rating (Cooling)
In the Quiet mode during heating/cooling operation with low fan speed (Indoor)
SINGLE INVERTER-SPLIT TYPE

CS-E15DTEW

CU-E15DBE/ E18DBR

CS-E15HB4EA

CU-E15HBR/ E18HBR
Indoor unit: installed below the ceiling
Indoor unit: installed on the floor

CS-E18DTEW

Panel CZ-BT20E

CS-E18HB4EA

30 dB 32 dB
E15DTEW E18DTEW (34dB) (36dB)

25 dB 26 dB

Model No. (230V) 4.15 14,200 CS-E15DTEW (0.90~4.55) (3,070~15,500) (CU-E15DBE) 5.17 17,600 (0.90~6.30) (3,070~21,500) 4.80 16,400 CS-E18DTEW (0.90~5.40) (3,070~18,400) (CU-E18DBR) 6.10 20,800 (0.90~7.60) (3,070~25,900) 5.90 7.00 Cooling Capacity Heating Capacity kW Btu/h Power Air Flow Dehumid Running Input Current L/s L/h A kW
Model No. (240V) Cooling Capacity Heating Capacity kW Btu/h Air Flow Dehumid Running Current L/s L/h

EER : Cooling Efficiency

COP: Heating Efficiency
Pipe EER Star Sound Pressure Sound Dimensions Refrigerant Pipe Extension Pipe Length Additional Power Operating Range (outdoor) Power for Additional Gas COP Rating Level*1 dB (A) Level dB (A) Net Weight Height x Width x Depth Diameter Length Gas Amount Supply Cooling Heating Inside Outside Outside Liquid Side Gas Side Min~Max W/W kg mm m g/m Degree (C) (Hi/Lo/S-Lo) (Hi/S-Lo) (Hi/S-Lo) mm mm (m) (inch) (inch)
1.29 (0.255~1.55) 3.22 3.34 1.55 (0.26~2.05)

1.5 1.5

45/37/34 45/33/30

17 (48)

540 x 1028 x 200 (750 x 875 x 345)
4.10 14,000 CS-E15HB4EA (0.90~4.80) (3,070~16,400) (CU-E15HBR) 4.60 15,700 (0.90~6.20) (3,070~21,100) CZ-BT20E

175 180

208 212
1.47 6.60 (0.255~1.89) 3.27 8.10 3.35 1.82 (0.26~2.38)
Pipe Pipe Length Power EER Star Sound Pressure Sound Net Weight Dimensions Refrigerant Pipe Extension for Additional Additional Power Operating Range (outdoor) Power Gas Input COP Rating Level*1 dB (A) Level dB (A) Height x Width x Depth Diameter Length Gas Amount Supply Cooling Heating Inside Outside Outside Liquid Side Gas Side Min~Max A kW W/W kg mm m g/m Degree (C) (Hi/Lo/S-Lo) (Hi/S-Lo) (Hi/S-Lo) mm mm (m) (inch) (inch) 1.60/ 260 x 575 x 575 6.12.70 3~Outdoor -10~43 -10~24 5.90 (0.255~1.71) 3.15 1.0 34/26/23 45/ (1/2) (48) (750 x 875+68*2 x 345) (1/4) 62/ 6.40 3.19 1.0 35/28/25 47/ 1.44 (0.26~2.18) (Panel) (Panel) 2.x 700 x 700

46/39/36 47/35/32

18 (48)
540 x 1028 x 200 (750 x 875 x 345
4.80 16,400 CS-E18HB4EA (0.90~5.70) (3,070~19,400) (CU-E18HBR) 5.00 17,100 (0.90~7.10) (3,070~24,200) CZ-BT20E

183 192

6.90 6.90
1.53 (0.255~1.93) 3.14 3.18 1.57 (0.26~2.45)

1.5 1.0

36/28/25 37/29/26

18 (48) (Panel) 2.5

260 x 575 x 575 (750 x 875+68*2 x 345) (Panel) 51 x 700 x 700

Outdoor -10~43

-10~24
*1 Sound Pressure Level is measured according to JIS C 9612. *2 Add 68mm for piping port.

CS-E15JD3EA

CS-E18JD3EA

25 dB 29 dB

Model No. (240V) Cooling Capacity Heating Capacity kW Btu/h
Operating Range Pipe Pipe Length Additional External Running Power EER Star Sound Pressure Sound (outdoor) Power Net Weight Dimensions Refrigerant Pipe Extension for Additional Gas Power Air Flow Dehumid Static Current Height x Width x Depth Input COP Rating Level*1 dB (A) Level dB (A) Diameter Length Gas Amount Supply Cooling Heating Pressure Inside Outside Outside Liquid Side Gas Side Min~Max Pa L/s L/h A kW W/W mm m g/m Degree (C) (Hi/Lo/S-Lo) (Hi/S-Lo) (Hi/S-Lo) kg mm mm (m) (mmAq) (inch) (inch)

CS-E15JD3EA (CU-E15HBR)

4.10 14,000 (0.90~4.70) (3,070~16,000) 4.30 14,700 (0.90~5.50) (3,070~18,800) 5.10 17,400 (0.90~5.70) (3,070~19,400) 6.10 20,800 (0.90~7.10) (3,070~24,200)

131 148

34 (3.5) 64 (6.5) 34 (3.5) 78 (8.0)

5.6 6.3

1.24 (0.255~1.50) 3.31 3.07 1.40 (0.26~2.09) 1.62 (0.255~1.84) 3.15 3.30 1.85 (0.26~2.20)

33/27/24 35/28/25

235 x 750+65*3 x 370 (750 x 875+68*2 x 345)

CS-E18JD3EA (CU-E18HBR)

173 217

7.1 8.0

1.0 1.5

41/30/27 41/32/29

285 x 750+65*3 x 370 (750 x 875+68*2 x 345)
*1 Sound Pressure Level is measured according to JIS C 9612. *2 Add 68mm for piping port. *3 Add 65mm for power supply box.
MULTI INVERTER-SPLIT TYPE

Reverse cycle

(Deluxe)
Advantages of the Multi Inverter System
A variety of indoor units Air-quality features (Wall-mounted type only) Indoor unit
Plus e-ion Air Purifying System
Adjusts the operation settings for each indoor unit independently
Model No Capacity Model No Capacity CS-E7LKEW 2.0kW class CS-E18LKEW *1 ** 5.0kW class CS-E9LKEW 2.5kW class CS-E12LKEW 3.2kW class CS-E15LKEW *1 4.0kW class
With a single outdoor unit, control up to 4 indoor units. (Maximum)

Model No Capacity

CS-E9GFEW 2.8kW class

CS-E12GFEW 3.2kW class

CS-E18GFEW *1 5.0kW class

Space-saving

68% less space than four single split types.

Inverter control

CS-E21LKEW *2 *3 *6 ** 6.0kW class

** Due May 2011

Single Split Type CU-E9GFE-1

BIG SPACE SAVINGS!

*6 Only to be used with CU-4E23LBE
The inverter offers energy-saving efficiency, quick comfort, and flexible power control. Our compressor saves more energy while reducing vibration, noise and unit size.

Indoor Unit

Combination Patterns
Refrigerant Pipe Diameter Pipe Extension
Maximum Pipe Length (1 room) Maximum Maximum Pipe Chargeless Length Length (Total) Additional Gas Indoor Unit Combinations

Models

Indoor Units: Possible Combination Patterns
Must be within capacity range.
Indoor Units Combination Range

Liquid Side

Gas Side
Type Maximum Height Capacity [kW class]

WallMounted

HideAway

Panel CZ-BT20P

Model No Capacity CS-ME7EB1E 2.0kW class CS-ME10EB1E 2.8kW class CS-ME14EB1E 4.0kW class Model No Capacity CS-E15HB4EA *1 4.0kW class
CS-E18HB4EA *1 5.0kW class

2.0 or 2.5

* Either unit

4.0 | 6.4 kW

20 m 30 m 20 m 20 g/m 10 m
Dimensions (HxWxD): 540 x 780(+70) x 289 mm Weight: 38 kg
* At least two indoor units must be connected.
Make sure to keep combinations within this range.

4.5 | 11.0 kW

9.m 60 m 30 m 20 g/m 15 m

2.8 3.2 4.0 5.0

CS-E15DTEW *1 4.0kW class
CS-E18DTEW *1 5.0kW class

CS-E10KD3EA 2.5kW class

CS-E15JD3EA *1 4.0kW class
CS-E18JD3EA *1 5.0kW class
Dimensions (HxWxD): 795 x 875(+95) x 320 mm Weight: 72 kg

Outdoor Unit

Additional Parts
Pipe Size Reducer Pipe Size Expander

6.0 2.0

6.35 9.52

4.5 | 13.6 kW

-15C*4 43C

-20C*5 46C

CZ-MA1P
For the indoor units marked with a star (*1), the pipe size reducer must be used at the indoor units connection port.

CZ-MA2P

For the indoor units marked with a star (*2), the pipe size expander must be used at the outdoor units connection port.
25 m 70 m 40 m 20 g/m 15 m
CU-2E18LBE Feature Comparison p.36~p.37
CU-4E23LBE Specifications p.31
*3 Only be used with the CU-4E23LBE. *4 Operating temperature limit is -15C with performance data guaranteed down to -10C. *5 Operating temperature limit is -20C with performance data guaranteed down to -15C.
Dimensions (HxWxD): 908 x 900 x 320 mm Weight: 73 kg

SPECIFICATIONS

Multi Inverter Split : Indoor Units
Model Power Source Noise (Hi/Lo/S-Lo) Sound Pressure Level CS-E7LKEW (2.0kW class) CS-E9LKEW (2.5kW class) CS-E12LKEW (3.2kW class) CS-E15LKEW (4.0kW class) CS-E18LKEW (5.0kW class) CS-E21LKEW* (6.0kW class) Cooling Heating
Multi Inverter Split : Outdoor Units
Model No. (50Hz) Indoor-units Combination Power Source CU-2E18LBE 3.2 kW + 3.2 kW CU-4E23LBE 2.5 kW + 2.8 kW + 2.8 kW + 2.8 kW Single phase, 230 V, 50 Hz (Power supply from outdoor unit) CU-4E27CBPG

Cooling Heating

3.2 kW + 3.2 kW + 3.2 kW + 4.0 kW
Single phase, 230 V, 50 Hz dB(A) 40/29/26 40/29/26 56/ 56/ 9.0 40/29/26 40/29/26 56/ 56/ 9.0 44/32/29 44/32/29 60/ 60/ 44/32/29 44/33/29 60/ 60/ 46/33/30 46/35/32 62/ 62/ 1,12.0 46/33/30 46/35/32 62/ 62/ 1,12.0
Cooling Operation Capacity Electrical Data Running Current Power Input EER Noise Sound Pressure Level dB(A) dB 49/64/48/62/48/61/A W W/W 7.10 1,520 (250 - 1,580) 3.42 7.50 1,680 (340 - 2,470) 4.05 8.70 1,980 (530 - 2,870) 4.04 kW 5.2 (1.5 - 5.4) 6.8 (1.9 - 8.8) 8.0 (3.0 - 9.2)
dB Sound Power Level Fan Output W Dimensions Height mm Width mm Depth mm Net Weight kg Connecting Cable Refrigerant Pipe Diameter Liquid Side mm Gas Side mm
9.0 9.+ 1 (earth), 1.5 mm2 6.35 9.52 6.35 9.52*1

6.35 9.52

6.35 9.52*1

6.35 12.70*2

Sound Power Level Heating Operation Capacity

5.6 (1.1 - 7.2)

8.6 (3.0 - 10.6)

9.4 (4.2 - 10.6)

Model Power Source Noise (Hi/Lo/S-Lo) Sound Pressure Level Sound Power Level CS-E9GFEW (2.8kW class) CS-E12GFEW (3.2kW class) CS-E18GFEW (5.0kW class) Single phase, 230 V, 50 Hz dB(A) dB 38/27/23 38/27/23 54/ 54/ 14.0 39/28/24 39/27/23 55/ 55/ 14.0 44/36/32 46/36/32 60/ 62/ 14.+ 1 (earth), 1.5 mm2 6.35 9.52 6.35 9.52 6.35 9.52*1 6.35 9.52*1
CS-E15DTEW (4.0kW class) CS-E18DTEW (5.0kW class)
Electrical Data Running Current Power Input A W W/W 5.35 1,210 (210 - 1,700) 4.63 8.60 1,850 (580 - 2,600) 4.65 9.10 2,080 (700 - 3,060) 4.52
45/37/34 45/33/30 58/ 58/ 1,17.0
46/39/36 47/35/32 59/ 60/ 1,18.0
COP Noise Sound Pressure Level Sound Power Level Maximum Current Starting Current Compressor Output Fan Output Circuit Breaker Ratio Dimensions Height

dB(A) dB A A W W A

12.0 7.10 1,15

15.6 8.60 1,20

19.0 9.10 2,20
Fan Output W Dimensions Height mm Width mm Depth mm Net Weight kg Connecting Cable Refrigerant Pipe Diameter Liquid Side mm Gas Side mm

mm mm mm kg

(+70) 289 38
(+95) 3 + 1 (earth), 1.5 mm2

320 73

Model Power Source Noise (Hi/Lo/S-Lo) Sound dB(A) Pressure Level Sound Power Level dB CS-ME7EB1E (2.0kW class) CS-ME10EB1E (2.8kW class) CS-ME14EB1E (4.0kW class)
CS-E15HB4EA (4.0kW class) CS-E18HB4EA (5.0kW class) CS-E10KD3EA (2.5kW class)
CS-E15JD3EA (4.0kW class) CS-E18JD3EA (5.0kW class)
Width Depth Net Weight Connecting Cable
Single phase, 230 V, 50 Hz 40/32/29 42/32/29 53/ 55/ 30 360 9.8 40/32/29 42/32/29 53/ 55/ 30 360 9.8 43/32/29 44/34/31 56/ 57/ 30 360 9.8 34/26/23 35/28/25 47/ 48/ 40 36/28/25 37/29/26 49/ 50/ 40 33/24/21 35/25/22 49/ 51/ 30 34/64 (3.47/6.53) 6.750(+65) 370 17.0 33/27/24 33/27/24 49/ 51/ 30 34/69 (3.47/7.04) 7.750(+65) 370 18.0 41/30/27 41/32/29 57/ 57/ 30 34/78 (3.47/7.95) 10.750(+65) 370 18.0
Pipe Length Range (1 room)

3 - 20 30

3 - 25 60

3 - 25 70

Maximum Pipe Length (Total room)*3 m Refrigerant Pipe Diameter Liquid Side Gas Side Operating Range Cooling Heating (C) (C) mm mm
Fan Output W External Static Pressure Pa(mmAq) Air Circulation m3/min Dimensions Height mm Width mm Depth mm Net Weight kg Connecting Cable Refrigerant Pipe Diameter Liquid Side mm Gas Side mm

16 ~ 43 -15 ~ 24*1

-10 ~ 46 -20 ~ 24*2
18.0 18.+ 1 (earth), 1.5 mm2 6.35 9.52 *1 6.35 9.52 *1
*1 Operating temperature limit is -15C with performance data guaranteed down to -10C. *2 Operating temperature limit is -20C with performance data guaranteed down to -15C. *3 Additional Gas might be required for some models. Refer to page 29 for information on Additional Gas.
6.35 9.52*1 Rating Conditions
Inside air temperature Outside air temperature Cooling 27 C DB /19 C WB 35 C DB Heating 20 C DB 7 C DB /6 C WB
* Only can be used with the CU-4E23LBE. *1 A pipe size reducer (CZ-MA1P) must be used to reduce the pipe diameter to 9.52 mm at the connection port of the indoor unit. *2 A pipe size expander (CZ-MA2P) must be used to expand the pipe diameter of the outdoor unit from 9.52mm to 12.7 mm at the connection port of the outdoor unit.
How to Read the Table Indoor unit combinations are shown here as the number of units operating, and their capacity class.
COOLING OPERATION Cooling Capacity Indoor Units Capacity 2.0 + 2.0 + 2.0 2.0 + 2.0 + 2.5 2.0 + 2.0 + 2.8 2.0 + 2.0 + 3.2 2.0 + 2.0 + 4.0 2.0 + 2.0 + 5.0 2.0 + 2.0 + 6.0 2.0 + 2.5 + 2.5 2.0 + 2.5 + 2.8 2.0 + 2.5 + 3.2 2.0 + 2.5 + 4.0 2.0 + 2.5 + 5.0 2.0 + 2.5 + 6.0 2.0 + 2.8 + 2.8 2.0 + 2.8 + 3.2 2.0 + 2.8 + 4.0 2.0 + 2.8 + 5.0 2.0 + 2.8 + 6.0 2.0 + 3.2 + 3.2 2.0 + 3.2 + 4.2.0 + 3.2 + 5.0 rooms 2.0 + 4.0 + 4.0 2.0 + 4.0 + 5.0 2.5 + 2.5 + 2.5 2.5 + 2.5 + 2.8 2.5 + 2.5 + 3.2 2.5 + 2.5 + 4.0 2.5 + 2.5 + 5.0 2.5 + 2.5 + 6.0 2.5 + 2.8 + 2.8 2.5 + 2.8 + 3.2 2.5 + 2.8 + 4.0 2.5 + 2.8 + 5.0 2.5 + 3.2 + 3.2 2.5 + 3.2 + 4.0 2.5 + 3.2 + 5.0 2.5 + 4.0 + 4.0 2.8 + 2.8 + 2.8 2.8 + 2.8 + 3.2 2.8 + 2.8 + 4.0 2.8 + 2.8 + 5.0 2.8 + 3.2 + 3.2 2.8 + 3.2 + 4.0 2.8 + 3.2 + 5.0 2.8 + 4.0 + 4.0 3.2 + 3.2 + 3.2 3.2 + 3.2 + 4.0 2.0+ 2.0+2.0+ 2.0 2.0+ 2.0+2.0+ 2.5 2.0+ 2.0+2.0+ 2.8 2.0+ 2.0+2.0+ 3.2 2.0+ 2.0+2.0+ 4.0 2.0+ 2.0+2.0+ 5.0 2.0+ 2.0+2.5+ 2.5 2.0+ 2.0+2.5+ 2.8 2.0+ 2.0+2.5+ 3.2 2.0+ 2.0+2.5+ 4.0 2.0+ 2.0+2.8+ 2.8 2.0+ 2.0+2.8+ 3.2.0+ 2.0+2.8+ 4.0 rooms 2.0+ 2.0+3.2+ 3.2 2.0+ 2.5+2.5+ 2.5 2.0+ 2.5+2.5+ 2.8 2.0+ 2.5+2.5+ 3.2 2.0+ 2.5+2.5+ 4.0 2.0+ 2.5+2.8+ 2.8 2.0+ 2.5+2.8+ 3.2 2.0+ 2.5+3.2+ 3.2 2.0+ 2.8+2.8+ 2.8 2.0+ 2.8+2.8+ 3.2 2.5+ 2.5+2.5+ 2.5 2.5+ 2.5+2.5+ 2.8 2.5+ 2.5+2.5+ 3.2 2.5+ 2.5+2.8+ 2.8 2.5+ 2.5+2.8+ 3.2 2.5+ 2.8+2.8+ 2.8 Room A kW 2.00 2.00 2.00 1.89 1.70 1.51 1.36 1.94 1.86 1.76 1.60 1.43 1.29 1.78 1.70 1.55 1.39 1.26 1.62 1.47 1.33 1.36 1.24 2.26 2.18 2.07 1.89 1.70 1.55 2.10 2.00 1.83 1.65 1.92 1.75 1.59 1.62 2.26 2.16 1.98 1.80 2.06 1.90 1.73 1.76 2.26 2.09 1.70 1.60 1.55 1.48 1.36 1.24 1.51 1.46 1.40 1.30 1.42 1.36 1.26 1.31 1.43 1.39 1.33 1.23 1.34 1.30 1.24 1.31 1.26 1.70 1.65 1.59 1.60 1.55 1.55 Room B kW 2.00 2.00 2.00 1.89 1.70 1.51 1.36 2.43 2.33 2.21 2.00 1.79 1.62 2.51 2.38 2.16 1.94 1.76 2.59 2.37 2.13 2.72 2.47 2.26 2.18 2.07 1.89 1.70 1.55 2.35 2.24 2.05 1.85 2.44 2.24 2.03 2.59 2.26 2.16 1.98 1.80 2.37 2.18 1.98 2.52 2.26 2.09 1.70 1.60 1.55 1.48 1.36 1.24 1.51 1.46 1.40 1.30 1.42 1.36 1.26 1.31 1.79 1.73 1.67 1.55 1.68 1.62 1.56 1.83 1.76 1.70 1.65 1.59 1.60 1.55 1.75 Room C kW 2.00 2.50 2.80 3.02 3.40 3.78 4.08 2.43 2.61 2.83 3.20 3.58 3.89 2.51 2.72 3.09 3.47 3.78 2.59 2.96 3.34 2.72 3.09 2.26 2.44 2.66 3.02 3.40 3.70 2.35 2.56 2.92 3.30 2.44 2.81 3.18 2.59 2.26 2.48 2.84 3.20 2.37 2.72 3.09 2.52 2.26 2.62 1.70 1.60 1.55 1.48 1.36 1.24 1.89 1.83 1.75 1.61 1.98 1.90 1.76 2.09 1.79 1.73 1.67 1.55 1.89 1.81 2.00 1.83 1.76 1.70 1.65 1.59 1.80 1.72 1.75 Room D kW 1.70 2.00 2.15 2.36 2.72 3.08 1.89 2.05 2.25 2.59 1.98 2.18 2.52 2.09 1.79 1.95 2.13 2.47 1.89 2.07 2.00 1.83 2.02 1.70 1.85 2.03 1.80 1.98 1.75 Total kW 6.00 (1.9 - 8.0) 6.50 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.1) 6.80 (2.0 - 8.5) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.1) 6.80 (2.0 - 8.5) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.1) 6.80 (2.0 - 8.5) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.1) 6.80 (1.9 - 8.2) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.2) 6.80 (2.0 - 8.5) 6.78 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.1) 6.80 (2.0 - 8.5) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.1) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.1) 6.80 (1.9 - 8.2) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.2) 6.78 (1.9 - 8.0) 6.80 (1.9 - 8.0) 6.80 (1.9 - 8.1) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.1) 6.80 (1.9 - 8.2) 6.80 (2.0 - 8.5) 6.80 (1.9 - 8.2) 6.78 (1.9 - 8.2) 6.80 (1.9 - 8.2) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) 6.80 (1.9 - 8.8) 6.80 (1.9 - 8.7) Heating Capacity Power Input W 1650 ((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((340 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2460) 2470) 2470) 2470) 2460) 2460) 2470) 2470) 2460) 2470) 2470) 2430) 2460) 2460) 2470) 2470) 2460) 2470) 2430) 2460) 2470) 2460) 2460) 2470) 2460) 2470) 2460) A.E.C.# Room A kW kW 2.86 2.65 2.53 2.39 2.15 1.91 1.72 2.46 2.35 2.23 2.02 1.81 1.64 2.26 2.15 1.95 1.75 1.59 2.04 1.87 1.68 1.72 1.56 2.86 2.76 2.62 2.39 2.15 1.95 2.66 2.53 2.31 2.09 2.42 2.21 2.01 2.04 2.86 2.74 2.51 2.27 2.62 2.41 2.19 2.22 2.86 2.65 2.15 2.02 1.95 1.87 1.72 1.56 1.91 1.85 1.77 1.64 1.79 1.72 1.59 1.65 1.82 1.76 1.68 1.56 1.70 1.64 1.58 1.64 1.59 2.15 2.09 2.01 2.03 1.95 1.97 Room B kW 2.86 2.65 2.53 2.39 2.15 1.91 1.72 3.07 2.95 2.79 2.53 2.26 2.05 3.17 3.01 2.74 2.46 2.23 3.28 2.99 2.70 3.44 3.13 2.86 2.76 2.62 2.39 2.15 1.95 2.97 2.83 2.59 2.34 3.09 2.84 2.57 3.28 2.86 2.74 2.51 2.27 2.99 2.75 2.50 3.19 2.86 2.65 2.15 2.02 1.95 1.87 1.72 1.56 1.91 1.85 1.77 1.64 1.79 1.72 1.59 1.65 2.26 2.19 2.11 1.95 2.14 2.05 1.98 2.32 2.23 2.15 2.09 2.01 2.03 1.95 2.21 Room C kW 2.86 3.30 3.54 3.82 4.30 4.78 5.16 3.07 3.30 3.58 4.05 4.53 4.91 3.17 3.44 3.91 4.39 4.78 3.28 3.74 4.22 3.44 3.91 2.86 3.08 3.36 3.82 4.30 4.70 2.97 3.24 3.70 4.17 3.09 3.55 4.02 3.28 2.86 3.12 3.58 4.06 2.99 3.44 3.91 3.19 2.86 3.30 2.15 2.02 1.95 1.87 1.72 1.56 2.39 2.31 2.22 2.04 2.51 2.41 2.23 2.65 2.26 2.19 2.11 1.95 2.38 2.29 2.52 2.32 2.23 2.15 2.09 2.01 2.27 2.19 2.21 Room D kW 2.15 2.54 2.75 2.99 3.44 3.92 2.39 2.59 2.84 3.28 2.51 2.75 3.19 2.65 2.26 2.46 2.70 3.14 2.38 2.62 2.52 2.32 2.55 2.15 2.33 2.57 2.27 2.51 2.21 Total kW

# A.E.C. : Annual Energy Consumption HEATING OPERATION Heating Capacity Power Input W (220 - 750) (220 - 1,000) (220 - 1,000) (220 - 1,220) A.E.C.# Room A kW kW 3.20 3.60 4.00 4.50 2.70 2.40 2.25 2.15 2.80 2.65 2.45 2.80 2.60 2.80 Room B kW 2.70 3.00 3.15 3.45 2.80 2.95 3.15 2.80 3.00 2.80 Total kW 3.20 (0.7 - 4.8) 3.60 (0.7 - 5.5) 4.00 (0.7 - 5.5) 4.50 (0.7 - 6.2) 5.40 (1.1 - 7.0) 5.40 (1.1 - 7.0) 5.40 (1.1 - 7.0) 5.60 (1.1 - 7.2) 5.60 (1.1 - 7.2) 5.60 (1.1 - 7.2) 5.60 (1.1 - 7.2) 5.60 (1.1 - 7.2) 5.60 (1.1 - 7.2) 5.60 (1.1 - 7.2) Running Current A 3.75 4.55 5.10 5.55 5.20 5.20 5.20 5.45 5.55 5.55 5.45 5.55 5.45 5.Power Input W (170 - 1,410) 1,030 (170 - 1,700) 1,150 (170 - 1,700) 1,250 (170 - 1,810) 1,170 (210 - 1,670) 1,170 (210 - 1,670) 1,170 (210 - 1,670) 1,230 (210 - 1,720) 1,250 (210 - 1,740) 1,250 (210 - 1,740) 1,230 (210 - 1,720) 1,250 (210 - 1,740) 1,230 (210 - 1,720) 1,210 (210 - 1,700)
1,090 (250 - 1,350) 1,230 (250 - 1,520) 1,230 (250 - 1,520) 1,310 (250 - 1,540) 1,310 (250 - 1,520) 1,310 (250 - 1,520) 1,490 (250 - 1,540) 1,310 (250 - 1,520) 1,490 (250 - 1,540) 1,520 (250 - 1,580)
*The specifications are different from other type of indoor units when 2.8kW duct type or floor/ceiling type is connected to CU-2E18LBE.
COOLING OPERATION Cooling Capacity Indoor Units Capacity 2.00 2.2.80 room 3.20 4.00 5.00 6.00 2.0 + 2.0 2.0 + 2.5 2.0 + 2.8 2.0 + 3.2 2.0 + 4.0 2.0 + 5.0 2.0 + 6.0 2.5 + 2.5 2.5 + 2.8 2.5 + 3.2 2.5 + 4.2.5 + 5.0 rooms 2.5 + 6.0 2.8 + 2.8 2.8 + 3.2 2.8 + 4.0 2.8 + 5.0 2.8 + 6.0 3.2 + 3.2 3.2 + 4.0 3.2 + 5.0 3.2 + 6.0 4.0 + 4.0 4.0 + 5.0 4.0 + 6.0 5.0 + 5.0 5.0 + 6.0 Room A kW 2.00 2.50 2.80 3.20 4.00 5.00 6.00 2.00 2.00 2.00 2.00 2.00 1.94 1.70 2.50 2.50 2.50 2.50 2.27 2.00 2.80 2.80 2.80 2.44 2.16 3.20 3.02 2.65 2.37 3.40 3.02 2.72 3.40 3.09 Room B kW 2.00 2.50 2.80 3.20 4.00 4.86 5.10 2.50 2.80 3.20 4.00 4.53 4.80 2.80 3.20 4.00 4.36 4.64 3.20 3.78 4.15 4.43 3.40 3.78 4.08 3.40 3.71 Room C kW Room D kW Total kW 2.00 (1.8 - 2.9) 2.50 (1.8 - 2.9) 2.80 (1.8 - 2.9) 3.20 (1.8 - 3.8) 4.00 (1.8 - 4.3) 5.00 (1.9 - 5.7) 6.00 (1.9 - 6.2) 4.00 (1.9 - 6.4) 4.50 (1.9 - 6.4) 4.80 (1.9 - 6.4) 5.20 (1.9 - 6.9) 6.00 (1.9 - 6.9) 6.80 (2.0 - 7.5) 6.80 (2.0 - 7.5) 5.00 (1.9 - 6.8) 5.30 (1.9 - 6.8) 5.70 (1.9 - 6.9) 6.50 (1.9 - 6.9) 6.80 (1.9 - 7.5) 6.80 (1.9 - 7.5) 5.60 (1.9 - 6.8) 6.00 (1.9 - 6.9) 6.80 (1.9 - 6.9) 6.80 (1.9 - 7.5) 6.80 (1.9 - 7.5) 6.40 (1.9 - 7.0) 6.80 (1.9 - 7.1) 6.80 (2.0 - 7.6) 6.80 (2.0 - 7.6) 6.80 (1.9 - 7.1) 6.80 (2.0 - 7.6) 6.80 (2.0 - 7.6) 6.80 (2.1 - 8.1) 6.80 (2.1 - 8.1) Running Current A 2.5 3.2 3.5 3.9 5.8 7.2 9.2 4.5 5.7 6.1 6.8 8.1 8.1 8.1 6.2 6.6 7.4 9.2 8.8 8.8 6.9 7.8 9.7 8.8 8.8 8.8 9.3 8.5 8.5 10.2 8.5 8.5 8.0 8.0 A.E.C.# Room A kW kW 3.20 3.60 4.00 4.50 5.60 6.80 8.50 2.90 2.71 2.67 2.69 2.73 2.46 2.15 3.20 3.30 3.55 3.31 2.87 2.53 4.00 3.97 3.54 3.09 2.74 4.30 3.82 3.36 2.99 4.30 3.82 3.44 4.30 3.91 Heating Capacity Power Input W 500 (340 - 810) 630 (340 - 810) 700 (340 - 810) 800 (340 - 1360) 1240 (340 - 1990) 1550 (340 - 2130) 2030 (340 - 2330) 1010 (340 - 2150) 1270 (340 - 2150) 1350 (340 - 2150) 1510 (340 - 2410) 1810 (330 - 2410) 1800 (320 - 2440) 1800 (320 - 2440) 1380 (340 - 2400) 1470 (340 - 2400) 1660 (340 - 2410) 2070 (330 - 2410) 1970 (320 - 2440) 1970 (320 - 2440) 1550 (340 - 2400) 1750 (340 - 2410) 2170 (330 - 2410) 1970 (320 - 2440) 1970 (320 - 2440) 1960 (330 - 2420) 2070 (330 - 2420) 1890 (320 - 2450) 1890 (320 - 2450) 2270 (330 - 2420) 1890 (320 - 2450) 1890 (320 - 2450) 1780 (310 - 2460) 1780 (310 - 2460) Room B kW 2.90 3.39 3.73 4.31 5.47 6.14 6.45 3.20 3.70 4.55 5.29 5.73 6.07 4.00 4.53 5.06 5.51 5.86 4.30 4.78 5.24 5.61 4.30 4.78 5.16 4.30 4.69 Room C kW Room D kW Total kW

Note: When the Multi Inverter Split Type is used to operate two or more indoor units simultaneously, the capacity of each indoor unit may be lower than that when operating only one indoor unit. Be sure to refer to the following table to select the appropriate models.
COOLING OPERATION Cooling Capacity Indoor Units Capacity 2.0 2.2.8 room 3.2 4.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.2.5 rooms 2.5 2.8 2.8 2.8 2.8 3.2 3.2 3.2 4.0 4.0 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.rooms 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 3.2 3.2 3.2 3.2 3.2 3.2 4.0 4.0 Room A kW 2.00 2.50 2.80 3.20 4.00 5.00 2.00 2.00 2.00 2.00 2.00 2.00 2.50 2.50 2.50 2.50 2.35 2.80 2.80 2.80 2.55 3.20 3.10 2.90 3.60 3.25 3.75 2.00 2.00 2.00 2.05 1.95 1.80 2.10 2.00 1.95 1.90 1.70 1.90 1.90 1.80 1.60 1.90 1.70 1.55 1.60 1.45 1.30 2.60 2.50 2.45 2.20 2.00 2.40 2.35 2.15 1.95 2.20 2.05 1.85 1.90 1.70 1.60 2.60 2.55 2.35 2.10 2.40 2.25 2.00 2.10 1.90 1.70 2.66 2.45 2.25 2.30 2.10 1.90 2.66 2.45 Room B kW 2.00 2.50 2.80 3.20 4.00 5.00 2.50 2.80 3.20 4.00 4.75 2.80 3.20 4.00 4.55 3.20 3.90 4.50 3.60 4.05 3.75 2.00 2.00 2.00 2.05 1.95 1.80 2.65 2.55 2.45 2.35 2.10 2.75 2.65 2.55 2.30 3.00 2.80 2.50 3.20 2.90 3.35 2.60 2.50 2.45 2.20 2.00 2.70 2.65 2.40 2.15 2.90 2.65 2.40 3.05 2.80 3.20 2.60 2.55 2.35 2.10 2.80 2.55 2.35 2.95 2.70 3.15 2.66 2.45 2.25 2.85 2.60 3.05 2.66 2.45 Room C kW 2.00 2.50 2.80 3.20 3.90 4.40 2.65 2.85 3.20 3.75 4.20 2.75 3.05 3.65 4.10 3.00 3.50 3.95 3.20 3.65 3.35 2.60 2.80 3.10 3.60 4.00 2.70 3.00 3.45 3.90 2.90 3.30 3.75 3.05 3.50 3.20 2.60 2.90 3.30 3.80 2.80 3.20 3.65 2.95 3.40 3.15 2.66 3.10 3.50 2.85 3.30 3.05 2.66 3.10 Room D kW 2.00 2.50 2.80 3.20 4.00 5.00 4.00 4.50 4.80 5.20 6.00 7.00 5.00 5.30 5.70 6.50 7.10 5.60 6.00 6.80 7.10 6.40 7.00 7.40 7.20 7.30 7.50 6.00 6.50 6.80 7.30 7.80 8.00 7.40 7.40 7.60 8.00 8.00 7.40 7.60 8.00 8.00 7.90 8.00 8.00 8.00 8.00 8.00 7.80 7.80 8.00 8.00 8.00 7.80 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 7.80 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 8.00 7.98 8.00 8.00 8.00 8.00 8.00 7.98 8.00 Total kW (1.9 - 2.7) (2.0 - 3.4) (2.0 - 3.4) (2.0 - 3.9) (2.0 - 4.4) (2.1 - 5.2) (2.1 - 5.0) (2.1 - 6.1) (2.1 - 6.1) (2.2 - 7.0) (2.2 - 7.1) (2.5 - 7.2) (2.2 - 6.9) (2.2 - 6.9) (2.2 - 7.0) (2.2 - 7.1) (2.5 - 7.2) (2.2 - 6.9) (2.2 - 7.0) (2.2 - 7.1) (2.5 - 7.2) (2.2 - 7.3) (2.5 - 7.3) (2.6 - 7.4) (2.5 - 7.3) (2.7 - 7.4) (2.8 - 7.6) (2.2 - 7.8) (2.5 - 8.1) (2.5 - 8.1) (2.5 - 8.2) (2.6 - 8.2) (2.8 - 8.3) (2.5 - 8.1) (2.5 - 8.1) (2.6 - 8.2) (2.7 - 8.2) (2.8 - 8.3) (2.5 - 8.1) (2.6 - 8.2) (2.7 - 8.2) (2.8 - 8.3) (2.7 - 8.3) (2.8 - 8.4) (2.8 - 8.3) (2.8 - 8.4) (2.8 - 8.3) (2.9 - 8.4) (2.6 - 8.1) (2.6 - 8.1) (2.7 - 8.2) (2.8 - 8.2) (2.8 - 8.3) (2.6 - 8.1) (2.7 - 8.2) (2.8 - 8.2) (2.8 - 8.3) (2.7 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.9 - 8.5) (2.6 - 8.1) (2.7 - 8.2) (2.8 - 8.2) (2.8 - 8.3) (2.7 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.9 - 8.5) (2.8 - 8.5) (2.8 - 8.4) (2.8 - 8.4) (2.8 - 8.4) (2.9 - 8.4) (2.9 - 8.5) (2.9 - 8.4) (2.9 - 8.4) Running Current A 2.10 2.60 2.95 3.40 4.60 7.15 3.95 4.90 5.20 5.80 7.75 11.00 6.10 6.50 7.15 9.60 11.50 6.85 7.55 10.00 11.50 8.15 10.60 12.30 11.50 11.70 12.50 6.65 7.75 8.10 8.70 10.30 10.80 9.40 9.40 9.85 11.00 10.80 9.40 9.85 11.00 10.80 10.10 10.40 10.90 10.40 10.90 10.70 10.80 10.80 11.00 11.00 10.80 10.80 11.00 11.00 10.80 10.40 10.40 10.30 10.40 10.30 10.30 10.80 11.00 11.00 10.80 10.40 10.40 10.30 10.40 10.30 10.30 10.10 10.50 10.50 10.50 10.30 10.30 10.50 10.50 A.E.C.# Room A kW 1195 kW 3.20 3.60 4.00 4.50 5.60 7.10 3.20 3.15 2.95 2.90 2.75 2.50 3.55 3.55 3.55 3.30 3.00 3.85 3.80 3.55 3.25 4.25 3.90 3.60 4.55 4.20 4.70 2.87 2.70 2.60 2.45 2.30 2.10 2.60 2.45 2.40 2.20 2.00 2.40 2.30 2.15 1.90 2.20 2.05 1.85 1.90 1.70 1.60 3.08 2.96 2.85 2.60 2.35 2.84 2.75 2.50 2.30 2.60 2.40 2.20 2.20 2.05 1.90 3.08 3.00 2.75 2.50 2.90 2.65 2.40 2.40 2.20 2.10 3.13 2.90 2.65 2.70 2.45 2.30 3.13 2.90 Heating Capacity Power Input W 440 (380 - 620) 550 (380 - 900) 620 (380 - 900) 720 (380 - 1090) 1030 (380 - 1390) 1610 (400 - 1800) 890 (400 - 1260) 1110 (400 - 1880) 1180 (400 - 1880) 1320 (400 - 2790) 1760 (400 - 2790) 2500 (460 - 2800) 1380 (400 - 2780) 1470 (400 - 2780) 1620 (400 - 2790) 2180 (400 - 2790) 2610 (460 - 2800) 1550 (400 - 2780) 1700 (400 - 2790) 2280 (400 - 2790) 2610 (460 - 2800) 1860 (400 - 2810) 2410 (460 - 2810) 2820 (460 - 2880) 2620 (460 - 2810) 2670 (480 - 2820) 2860 (480 - 2870) 1510 (410 - 2490) 1760 (460 - 2850) 1840 (460 - 2850) 1980 (460 - 2790) 2330 (460 - 2830) 2460 (490 - 2820) 2140 (460 - 2790) 2140 (460 - 2790) 2240 (460 - 2840) 2510 (490 - 2800) 2460 (490 - 2800) 2140 (460 - 2790) 2240 (460 - 2840) 2510 (490 - 2800) 2460 (490 - 2800) 2290 (460 - 2810) 2380 (490 - 2840) 2470 (490 - 2840) 2380 (490 - 2810) 2470 (490 - 2810) 2430 (490 - 2830) 2450 (460 - 2820) 2450 (460 - 2820) 2510 (490 - 2810) 2510 (490 - 2790) 2460 (490 - 2790) 2450 (460 - 2820) 2510 (490 - 2810) 2510 (490 - 2790) 2460 (490 - 2790) 2380 (490 - 2850) 2380 (490 - 2820) 2340 (490 - 2830) 2380 (490 - 2800) 2340 (490 - 2800) 2340 (520 - 2800) 2450 (460 - 2820) 2510 (490 - 2810) 2510 (490 - 2790) 2460 (490 - 2790) 2380 (490 - 2850) 2380 (490 - 2820) 2340 (490 - 2830) 2380 (490 - 2800) 2340 (490 - 2800) 2340 (520 - 2800) 2300 (490 - 2830) 2390 (490 - 2800) 2390 (490 - 2830) 2390 (490 - 2820) 2350 (490 - 2820) 2350 (520 - 2810) 2390 (490 - 2840) 2390 (520 - 2810) Room B kW 3.20 3.95 4.15 4.60 5.55 6.30 3.55 3.95 4.55 5.30 6.00 3.85 4.30 5.05 5.75 4.25 4.90 5.60 4.55 5.20 4.70 2.87 2.70 2.60 2.45 2.30 2.10 3.20 3.10 3.00 2.75 2.45 3.30 3.20 3.00 2.70 3.55 3.25 2.95 3.75 3.40 3.90 3.08 2.96 2.85 2.60 2.35 3.20 3.10 2.85 2.55 3.40 3.10 2.80 3.60 3.25 3.75 3.08 3.00 2.75 2.50 3.25 3.00 2.75 3.50 3.20 3.65 3.13 2.90 2.65 3.35 3.10 3.55 3.13 2.90 Room C kW 2.87 3.40 3.60 4.00 4.60 5.20 3.20 3.45 3.80 4.45 4.95 3.30 3.70 4.25 4.80 3.55 4.10 4.60 3.75 4.30 3.90 3.08 3.32 3.70 4.20 4.70 3.20 3.55 4.05 4.55 3.40 3.90 4.40 3.60 4.10 3.75 3.08 3.40 3.90 4.40 3.25 3.75 4.25 3.50 4.00 3.65 3.13 3.60 4.10 3.35 3.85 3.55 3.13 3.60 Room D kW Total kW 3.20 (1.7 - 4.7) 3.60 (1.7 - 4.8) 4.00 (1.7 - 4.8) 4.50 (1.7 - 5.8) 5.60 (1.8 - 7.2) 7.10 (2.1 - 7.3) 6.40 (1.8 - 9.4) 7.10 (2.1 - 9.4) 7.10 (2.1 - 9.4) 7.50 (2.2 - 9.8) 8.30 (2.4 - 9.8) 8.80 (3.2 - 9.9) 7.10 (2.3 - 9.4) 7.50 (2.3 - 9.4) 8.10 (2.4 - 9.8) 8.60 (2.1 - 9.8) 9.00 (3.2 - 9.9) 7.70 (2.3 - 9.4) 8.10 (2.4 - 9.8) 8.60 (2.1 - 9.8) 9.00 (3.2 - 9.9) 8.50 (2.5 - 10.1) 8.80 (3.2 - 10.1) 9.20 (3.2 - 10.1) 9.10 (3.2 - 10.1) 9.40 (3.2 - 10.2) 9.40 (3.5 - 10.2) 8.61 (3.1 - 10.4) 8.80 (3.2 - 10.4) 8.80 (3.2 - 10.4) 8.90 (3.2 - 10.4) 9.20 (3.2 - 10.4) 9.40 (3.2 - 10.4) 9.00 (3.2 - 10.4) 9.00 (3.2 - 10.4) 9.20 (3.2 - 10.4) 9.40 (3.2 - 10.4) 9.40 (3.5 - 10.4) 9.00 (3.2 - 10.4) 9.20 (3.2 - 10.4) 9.40 (3.2 - 10.4) 9.40 (3.5 - 10.4) 9.30 (3.2 - 10.5) 9.40 (3.2 - 10.5) 9.40 (3.7 - 10.5) 9.40 (3.6 - 10.5) 9.40 (3.9 - 10.5) 9.40 (4.1 - 10.5) 9.24 (3.2 - 10.4) 9.24 (3.2 - 10.4) 9.40 (3.2 - 10.4) 9.40 (3.3 - 10.4) 9.40 (3.8 - 10.4) 9.24 (3.2 - 10.4) 9.40 (3.2 - 10.4) 9.40 (3.3 - 10.4) 9.40 (3.8 - 10.4) 9.40 (3.2 - 10.5) 9.40 (3.5 - 10.5) 9.40 (3.9 - 10.5) 9.40 (3.8 - 10.5) 9.40 (4.0 - 10.5) 9.40 (4.2 - 10.5) 9.24 (3.2 - 10.4) 9.40 (3.2 - 10.4) 9.40 (3.3 - 10.4) 9.40 (3.8 - 10.4) 9.40 (3.2 - 10.5) 9.40 (3.5 - 10.5) 9.40 (3.9 - 10.5) 9.40 (3.8 - 10.5) 9.40 (4.0 - 10.5) 9.40 (4.2 - 10.5) 9.39 (3.3 - 10.5) 9.40 (3.7 - 10.5) 9.40 (4.0 - 10.5) 9.40 (3.9 - 10.5) 9.40 (4.1 - 10.5) 9.40 (4.2 - 10.5) 9.39 (4.0 - 10.5) 9.40 (4.2 - 10.5) # A.E.C. : Annual Energy Consumption HEATING OPERATION Running Current A 3.85 4.85 5.40 5.85 8.35 12.40 6.50 7.55 7.55 7.65 9.05 9.90 8.15 8.65 8.70 9.65 10.50 8.85 8.70 9.65 10.50 9.30 9.85 10.50 10.30 10.90 10.90 8.80 8.85 8.85 8.95 9.50 9.30 9.20 9.20 9.30 9.50 9.15 9.20 9.30 9.50 9.15 9.40 9.50 9.55 9.30 9.30 9.55 9.55 9.55 9.65 9.40 9.20 9.55 9.65 9.40 9.20 9.55 9.40 9.50 9.05 9.20 9.40 9.55 9.65 9.40 9.20 9.55 9.40 9.50 9.05 9.20 9.40 9.50 9.40 9.40 9.30 9.20 9.05 9.20 9.15

Not all features found on all models.
The System of Model Numbers for Split Models

<Outdoor unit>

n : (n) rooms Multi

1 Model Type

CS : Split Type (Indoor unit) CU : Split Type (Outdoor unit) CZ : Accessories
2 Connection Configuration / Classification

<Indoor unit>

M : Multi Split Type H : Single Split / Deluxe T : Single Split / Deluxe Slim No Indications : Single Split / Deluxe

3 Function

E : Inverter Reverse Cycle

4 Capacity

Value = Capacity (Btu/h) x 1/1000 e.g. 18,000 Btu/h x 1/1000 = 18

5 Type

K : Wall-Mounted Type F : Floor Console Type T : Floor or Ceiling Dual Mountable Type B1,B4 : Cassette Type D3 : Hide-Away Type B : Flexibly connectable to various type of indoor unit

6 Other

G : Outdoor power supply for Multi Split Type
W,G : For either single or multi use S : For single use

Optional Accessories

Filters
Replacement SUPER alleru-buster filter
Applicable Models CZ-SA13P Cassette (4way) CS-E15HB4EA, CS-E18HB4EA CZ-SA14P Wall-Mounted (Deluxe), Floor or Ceiling CZ-SA13P,CZ-SA14P CS-HE9GKE, CS-HE12GKE, CS-E15DTEW, CS-E18DTEW, CS-ME10DTEG
Quality Management System Certificate
Certified to ISO 9001: 2008 Panasonic HA Air-Conditioning (M) Sdn.Bhd. Cert. No.: MY-AR 1010
Certified to ISO 9001: 2008

ISO 9001

Panasonic Home Appliances Air-Conditioning (Guangzhou) Co., Ltd.
Registration Number: 01209Q20645R5L
Environmental Management System Certificate
Certified to ISO 14001: 2004
Panasonic HA Air-Conditioning (M) Sdn.Bhd. Cert. No.: MY-ER0112
Applicable Models CZ-SA16P Wall-Mounted (Deluxe Slim) CS-TE9HKE, CS-TE12HKE CZ-SA16P
Panasonic Home Appliances Air-Conditioning (Guangzhou) Co., Ltd. Registration Number: 02107E10411R3L

Dealer Stamp

Standard Warranty

Panasonic leads the way. with eco ideas

eco ideas for Lifestyles

We will promote lifestyles with virtually zero CO2 emissions all throughout the world
eco ideas for Business-styles
We will create and pursue a business-style which makes the best use of resources and energy
Panasonic New Zealand Limited 350 Te Irirangi Drive, East Tamaki Manukau 2013, New Zealand Telephone: 0100, F acsimile: panasonic.co.n z