Reviews & Opinions
Independent and trusted. Read before buy Panasonic CU-2E18cbpg!

Panasonic CU-2E18cbpg

Manual

Download (English)
Panasonic CU-2E18cbpg, size: 826 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic CU-2E18cbpgAbout Panasonic CU-2E18cbpg
Here you can find all about Panasonic CU-2E18cbpg like manual and other informations. For example: review.

Panasonic CU-2E18cbpg manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic CU-2E18cbpg please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Panasonic CU-2E18cbpg photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 9. Page 1 of 1. Average Rating:
erikwanta 2:10am on Thursday, October 7th, 2010 
Context: Home personal / office setup; AT&T DSL; 3 Macs. This is my first experience of DSL, so I have no comparisons to make. However, after discovering other highly rated reviews at other sites.
Rocknox 7:07am on Monday, August 30th, 2010 
No LINKSYS NO LINKSYS Web interface VPN Capabilities Dual WAN, Powerful CPU, Large RAM Bad Firmware, Hardware not utilized, Freezes constantly. Cost, features firmare bug - firewall stops working - no fix Jul12004
habib_seif 4:45am on Wednesday, August 4th, 2010 
east to install hardware, had to search the web for bios. compatibility, design, performs well, value for money had to find and download bios
EvilGlowingApple 12:46pm on Wednesday, July 28th, 2010 
It seems ALL of my Linksys equipment (router, hub, and switch) lose ports each time we have a power outage. After replacing some of this equipment. Bottomline it works. Connected it to my HP multifunction unit and it works. Prints, Scans and also able to access the flash card drive on the printer.
LotosPlO 5:58pm on Thursday, July 8th, 2010 
Excellent item Used it to combine cable internet at 1 MBS and a DSL at 3MBS modem, Combined speed is as high as 14.29 MBS! Not worth massive CPU expenditure I have a few year old lenovo laptop; from 07 I think. I was pretty surprised at how much CPU this thing used.
bizsys 2:02pm on Wednesday, June 16th, 2010 
This is a very nifty piece of hardware. We have 4 computers running in my house. This product works great with the Linksys Router we purchased. It was easy to set up and has worked everyday without a single glitch! Network adapter gets good signal but with a wireless N router and N adapter I expected excellent reception all the time but I only get excellent recep...
Nick Niehaus 6:37am on Monday, June 7th, 2010 
Great router, especially when used in pairs or multiples to achieve low cost VPN circuits. I have found this router to be one of the best routers. No Comment. None. Superior product. We use it for VoIP traffic and the QoS (clarity) has greatly improved. We are very satisfied with the operation. quiet, dependable none No Comment. No Comment. No Comment.
vgupta09 9:26pm on Thursday, May 20th, 2010 
Worked well for the time that I used it Started disconnecting at random. Took forever to try and get reconnected. None Handles network traffic well, running on Windows 2008 Server R2 Standard, network teaming configured, excellent addition to my server.
xzj 2:12am on Wednesday, March 17th, 2010 
I have a switch and wireless access point connected. It runs 24/7. It is replacing a nearly identical unit that operated for 5 years. Easy To Set Up,...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Order No. MAC0801088C2

Air Conditioner

Indoor Unit Outdoor Unit CS-CE7HKEW CU-CE7HKE CS-CE9HKEW CU-CE9HKE CS-CE12HKEW CU-CE12HKE
Please file and use this manual together with the service manual for Model No. CU-2E18CBPG, CU-3E23CBPG, CU4E27CBPG, Order No. RAC0209005C2, Model No. CU-3E18EBE, Order No. RAC0503011C2 and Model No. CU-2E15GBE, Order No. MAC0704001A2.

TABLE OF CONTENTS

PAGE 1 Safety Precautions----------------------------------------------- Specifications ----------------------------------------------------- 4 2.1. CS-CE7HKEW CU-CE7HKE -------------------------- 4 2.2. CS-CE9HKEW CU-CE9HKE -------------------------- 6 2.3. CS-CE12HKEW CU-CE12HKE ----------------------- 8 2.4. Outdoor Unit: CU-2E15GBE ---------------------------10 2.5. Outdoor Unit: CU-3E18EBE --------------------------- 11 2.6. Outdoor Unit: CU-3E23CBPG CU4E27CBPG-------------------------------------------------Features ------------------------------------------------------------Location of Controls and Components ------------------18 4.1. Indoor Unit--------------------------------------------------PAGE 4.2. Outdoor Unit----------------------------------------------- 18 4.3. Remote Control------------------------------------------- 18 Dimensions ------------------------------------------------------- 19 5.1. Indoor Unit ------------------------------------------------- 19 5.2. Outdoor Unit----------------------------------------------- 20 Refrigeration Cycle Diagram -------------------------------- 21 Block Diagram --------------------------------------------------- 22 Wiring Connection Diagram--------------------------------- 23 8.1. Indoor Unit ------------------------------------------------- 23 8.2. Outdoor Unit----------------------------------------------- 24 Electronic Circuit Diagram----------------------------------- 25 9.1. Indoor Unit ------------------------------------------------- 25
2007 Panasonic HA Air-Conditioning (M) Sdn. Bhd. (11969-T). All rights reserved. Unauthorized copying and distribution is a violation of law.
9.2. Outdoor Unit ----------------------------------------------- Printed Circuit Board ------------------------------------------ 27 10.1. Indoor Unit ------------------------------------------------- 27 10.2. Outdoor Unit ----------------------------------------------- Installation Instruction ---------------------------------------- 30 11.1. Select The Best Location ------------------------------ 30 11.2. Indoor/Outdoor Unit Installation Diagram ---------- 30 11.3. Indoor Unit ------------------------------------------------- 31 11.4. Outdoor Unit ----------------------------------------------- Operation Control----------------------------------------------- 37 12.1. Basic Function -------------------------------------------- 37 12.2. Indoor Fan Motor Operation --------------------------- 38 12.3. Outdoor Fan Motor Operation------------------------- 39 12.4. Airflow Direction ------------------------------------------ 39 12.5. Quiet operation (Cooling Mode/Cooling area of Dry Mode)----------------------------------------------- 40 12.6. Quiet operation (Heating) ------------------------------ 40 12.7. Powerful Mode Operation ------------------------------ 41 12.8. Timer Control---------------------------------------------- 41 12.9. Auto Restart Control------------------------------------- 41 12.10. Indication Panel------------------------------------------- 42 12.11. Patrol Operation ------------------------------------------ 42 12.12. e-ion Operation ------------------------------------------- Protection Control ---------------------------------------------- 47

Outdoor Unit: CU-3E23CBPG CU-4E27CBPG

3 Features

Inverter Technology - Wider output power range - Energy saving - Quick Cooling - Quick Heating - More precise temperature control E-ion Air Purifying System with Patrol Sensor - Active e-ions are released to catch dust particles and bring them back the large positively charged filter Environment Protection - Non-ozone depletion substances refrigerant (R410A) Long Installation Piping - CS/CU-CE7/9/12HK, long piping up to 15 meters Easy to use remote control Quality Improvement - Random auto restart after power failure for safety restart operation - Gas leakage protection - Prevent compressor reverse cycle - Inner protector to protect Compressor - Noise prevention during soft dry operation Operation Improvement - Quiet mode to reduce the indoor unit operating sound - Powerful mode to reach the desired room temperature quickly - 24-hour timer setting Serviceability Improvement - Breakdown Self Diagnosis function
Multi Split Combination Possibility: - A single outdoor unit enables air conditioning of up to two separate rooms for CU-2E15GBE, CU-2E18CBPG. - A single outdoor unit enables air conditioning of up to three separate rooms for CU-3E18EBE, CU-3E23CBPG. - A single outdoor unit enables air conditioning of up to four separate rooms for CU-4E27CBPG.
4 Location of Controls and Components

4.1. Indoor Unit

Outdoor Unit

Remote Control

5 Dimensions

5.1. Indoor Unit

6 Refrigeration Cycle Diagram
Piping size Model CE7HK, CE9HK, CE12HK Gas 3/8 Liquid 1/4

Rated Length (m) 7.5

Common Length (m) 7.5

Max. Elevation (m) 15

Min. Piping Length (m) 3
Max. Piping Length (m) 15
Additional Refrigerant (g/m) 20
If piping length is over common length, additional refrigerant should be added as shown in the table.

7 Block Diagram

8 Wiring Connection Diagram

8.1. Indoor Unit

9 Electronic Circuit Diagram

9.1. Indoor Unit

10 Printed Circuit Board

10.1. Indoor Unit

10.1.1. Main Printed Circuit Board
10.1.2. Power Printed Circuit Board

10.1.3. Indicator Printed Circuit Board
10.1.4. Patrol Printed Circuit Board

10.2. Outdoor Unit

11 Installation Instruction
11.1. Select The Best Location
INDOOR UNIT Do not install the unit in excessive oil fume area such as kitchen, workshop and etc. There should not be any heat source or steam near the unit. There should not be any obstacles blocking the air circulation. A place where air circulation in the room is good. A place where drainage can be easily done. A place where noise prevention is taken into consideration. Do not install the unit near the door way. Ensure the spaces indicated by arrows from the wall, ceiling, fence or other obstacles. Recommended installation height for indoor unit shall be at least 2.5 m. OUTDOOR UNIT If an awning is built over the unit to prevent direct sunlight or rain, be careful that heat radiation from the condenser is not obstructed. There should not be any animal or plant which could be affected by hot air discharged. Keep the spaces indicated by arrows from wall, ceiling, fence or other obstacles. Do not place any obstacles which may cause a short circuit of the discharged air. If piping length is over the rated length, additional refrigerant should be added as shown in the table.
Rated Max Min. Max. Additional Piping size Length Elevation Piping Piping Refrigerant (m) (m) Length Length (g/m) Gas Liquid (m) (m) 7.5 7.20
11.2. Indoor/Outdoor Unit Installation Diagram
CE7HKE, 3/8 1/4 CE9HKE CE12HKE 1/2 1/4
Example: For CE7HKE If the unit is installed at 10 m distance, the quantity of additional refrigerant should be 50g. (10 - 7.5) m x 20 g/m = 50 g

11.3. Indoor Unit

11.3.1. HOW TO FIX INSTALLATION PLATE 11.3.2.
The mounting wall is strong and solid enough to prevent it from the vibration.
TO DRILL A HOLE IN THE WALL AND INSTALL A SLEEVE OF PIPING
1. Insert the piping sleeve to the hole. 2. Fix the bushing to the sleeve. 3. Cut the sleeve until it extrudes about 15 mm from the wall.
Caution When the wall is hollow, please be sure to use the sleeve for tube assy to prevent dangers caused by mice biting the connecting cable.
The centre of installation plate should be at more than 450 mm at right and left of the wall. The distance from installation plate edge to ceiling should more than 67 mm. From installation plate left edge to units left side is 74 mm. From installation plate right edge to units right is 94 mm.
: For left side piping, piping connection for liquid should be about 15 mm from this line. : For left side piping, piping connection for gas should be about 45 mm from this line. : For left side piping, piping connection cable should be about 800 mm from this line.

11.4.5.

PIPE INSULATION
1. Please carry out insulation at pipe connection portion as mentioned in Indoor/Outdoor Unit Installation Diagram. Please wrap the insulated piping end to prevent water from going inside the piping. 2. If drain hose or connecting piping is in the room (where dew may form), please increase the insulation by using POLY-E FOAM with thickness 6 mm or above.

12 Operation Control

12.1. Basic Function
Inverter control, which equipped with a microcomputer in determining the most suitable operating mode as time passes, automatically adjusts output power for maximum comfort always. In order to achieve the suitable operating mode, the microcomputer maintains the set temperature by measuring the temperature of the environment and performing temperature shifting. The compressor at outdoor unit is operating following the frequency instructed by the microcomputer at indoor unit that judging the condition according to internal setting temperature and intake air temperature.
12.1.1. Internal Setting Temperature
Once the operation starts, remote control setting temperature will be taken as base value for temperature shifting processes. These shifting processes are depending on the air conditioner settings and the operation environment. The final shifted value will be used as internal setting temperature and it is updated continuously whenever the electrical power is supplied to the unit.
12.1.2. Cooling Operation 12.1.2.1. Thermostat control
Compressor is OFF when Intake Air Temperature - Internal Setting Temperature < -1.5 C. Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature > Compressor OFF point.
12.1.3. Soft Dry Operation 12.1.3.1. Thermostat control
12.1.4. Heating Operation 12.1.4.1. Thermostat control
Compressor is OFF when Intake Air Temperature - Internal Setting Temperature > +2.0 C. Compressor is ON after waiting for 3 minutes, if the Intake Air Temperature - Internal Setting Temperature < Compressor OFF point.
12.1.5. Automatic Operation
This mode can be set using remote control and the operation is decided by remote control setting temperature, remote control operation mode, indoor intake air temperature and outdoor air temperature. During operation mode judgment, indoor fan motor (with speed of Lo-) and outdoor fan motor are running for 30 seconds to detect the indoor intake and outdoor air temperature. The operation mode is decided based on below chart.
Every 30 minutes, the indoor and outdoor temperature is judged. Based on remote control setting temperature, the value of T1 will increase up to 10 C, T2 will decrease by 3 C and T3 will decrease up to 8 C. The Auto Operation Mode shifting will take place whenever operation mode changed from Cool/Soft Dry to Heating or vice versa.

12.2. Indoor Fan Motor Operation
A. Basic Rotation Speed (rpm) i. Manual Fan Speed [Cooling, Dry] Fan motors number of rotation is determined according to remote control setting.
Remote Control Tab (rpm) O SHi O Me+ O Me O MeO Lo
[Heating] Fan motors number of rotation is determined according to remote control setting.
Remote Control Tab (rpm) O Hi O Me+ O Me O MeO Lo
ii. Auto Fan Speed [Cooling, Dry] According to room temperature and setting temperature, indoor fan speed is determined automatically. The indoor fan will operate according to pattern below.
[Heating] According to indoor pipe temperature, automatic heating fan speed is determined as follows.
B. Feedback control Immediately after the fan motor started, feedback control is performed once every second. During fan motor on, if fan motor feedback 2550 rpm or < 50 rpm continue for 10 seconds, then fan motor error counter increase, fan motor is then stop and restart. If the fan motor counter becomes 7 times, then H19 - fan motor error is detected. Operation stops and cannot on back.
12.3. Outdoor Fan Motor Operation
Outdoor fan motor is operated with one fan speed only. It starts when compressor starts operation and it stops 30 seconds after compressor stops operation.

12.4. Airflow Direction

1. There are two types of airflow, vertical airflow (directed by horizontal vane) and horizontal airflow (directed by vertical vanes). 2. Control of airflow direction can be automatic (angles of direction is determined by operation mode, heat exchanger temperature and intake air temperature) and manual (angles of direction can be adjusted using remote control).

12.4.1. Vertical Airflow

Operation Mode Heating Airflow Direction 1 Auto with Heat Exchanger Temperature A B C D Manual Cooling and Ion Soft Dry Auto Manual Auto Manual Upward fix Downward fix Upward fix Downward fix 2 Vane Angle ( ) 10 ~ 10 ~ 4 5
1. Automatic vertical airflow direction can be set using remote control; the vane swings up and down within the angles as stated above. For heating mode operation, the angle of the vane depands on the indoor heat exchanger temperature as Figure 1 below. When the air conditioner is stopped using remote control, the vane will shift to close position.
2. Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above and the positions of the vane are as Figure 2 below. When the air conditioner is stopped using remote control, the vane will shift to close position.
12.4.2. Horizontal Airflow
The horizontal airflow direction louvers can be adjusted manually by hand.
12.5. Quiet operation (Cooling Mode/Cooling area of Dry Mode)

A. Purpose To provide quiet cooling operation compare to normal operation. B. Control condition a. Quiet operation start condition When Quiet button at remote control is pressed. Quiet LED illuminates. b. Quiet operation stop condition 1. When one of the following conditions is satisfied, quiet operation stops: a. Powerful button is pressed. b. Stop by OFF/ON switch. c. Timer off activates. d. Quiet button is pressed again. 2. When quiet operation is stopped, operation is shifted to normal operation with previous setting. 3. When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed. 4. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode. 5. During quiet operation, if timer on activates, quiet operation maintains. 6. After off, when on back, quiet operation is not memorised. C. Control contents 1. Fan speed is changed from normal setting to quiet setting of respective fan speed. This is to reduce sound of Hi, Me, Lo for 3dB (some models more than 3dB). 2. Fan speed for quiet operation is -1 step from setting fan speed.
12.6. Quiet operation (Heating)
A. Purpose To provide quiet heating operation compare to normal operation. B. Control condition a. Quiet operation start condition When Quiet button at remote control is pressed. Quiet LED illuminates. b. Quiet operation stop condition 1. When one of the following conditions is satisfied, quiet operation stops: a. Powerful button is pressed. b. Stop by OFF/ON switch. c. Timer off activates. d. Quiet button is pressed again.
2. When quiet operation is stopped, operation is shifted to normal operation with previous setting. 3. When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed. 4. When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, expect fan only mode. 5. During quiet operation, if timer on activates, quiet operation maintains. 6. After off, when on back, quiet operation is not memorised. C. Control contents a. Fan Speed manual 1. Fan speed is changed from normal setting to quiet setting of respective fan speed. This is to reduce sound of Hi, Me, Lo for 3dB. 2. Fan speed for quiet operation is -1 step from setting fan speed. b. Fan Speed Auto 1. Indoor FM RPM depends on pipe temp sensor of indoor heat exchanger.

12.7. Powerful Mode Operation
When the powerful mode is selected, the internal setting temperature will shift lower up to 2 C (for Cooling/Soft Dry) or higher up to 3.5 C (for Heating) than remote control setting temperature for 20 minutes to achieve the setting temperature quickly.

12.8. Timer Control

12.8.1. ON Timer Control
ON timer can be set using remote control, the unit with timer set will start operate earlier than the setting time. This is to provide a comfortable environment when reaching the set ON time. 60 minutes before the set time, indoor (at fan speed of Lo-) and outdoor fan motor start operate for 30 seconds to determine the indoor intake air temperature and outdoor air temperature in order to judge the operation starting time. From the above judgment, the decided operation will start operate earlier than the set time as shown below.
12.8.2. OFF Timer Control
OFF timer can be set using remote control, the unit with timer set will stop operate at set time.
12.9. Auto Restart Control
1. When the power supply is cut off during the operation of air conditioner, the compressor will re-operate within three to four minutes (there are 10 patterns between 2 minutes 58 seconds and 3 minutes 52 seconds to be selected randomly) after power supply resumes. 2. This type of control is not applicable during ON/OFF Timer setting.

12.10. Indication Panel

LED Color Light ON Light OFF POWER Green Operation ON Operation OFF TIMER Orange Quiet Setting ON Quiet Setting OFF QUIET Orange Quiet Mode ON Quiet Mode OFF POWERFUL Orange Powerful Mode ON Powerful Mode OFF e-ion Blue e-ion ON e-ion OFF PATROL SENSOR Blue PATROL ON PATROL OFF
Note: If POWER LED is blinking, the possible operation of the unit are Hot Start, during Deice operation, operation mode judgment, or ON timer sampling. If Timer LED is blinking, there is an abnormality operation occurs. If e-ion LED is blinking, there is an abnormality of e-ion occurs. If PATROL LED is blinking, there is a gas sensor error detection.

12.11. Patrol Operation

A. Purpose To monitor air dirtiness level by using gas sensor and activates e-ion operation whenever air is dirty. B. Control Condition a. Patrol operation start condition When the unit operation is started with OFF/ON button. When the unit stops, Patrol button is pressed, Patrol individual operation will start. During cooling only operation, Patrol button is pressed. b. Patrol operation stop condition When any of the following condition is fulfilled: When OFF/ON button is pressed. During any operation with Patrol, Patrol button is pressed again. When e-ion button is pressed. When OFF Timer activates.

c. Patrol operation disable To disable the Patrol Operation during unit start (default) with OFF/ON button, press Patrol button and hold for 5 seconds, then release. To disable the Patrol Operation, press Patrol button and hold for 15 seconds, then release. C. Control Content a. Gas Sensor Control First 2 minutes from Patrol function activates is stabilization time, during stabilization time, no air dirtiness level is monitored. The Air Dirtiness level is set to level 2. After that, gas sensor starts to record the resistance value at fixed interval. Higher resistance value indicates cleaner air. The air dirtiness level is monitored by comparing the current resistance value with maximum resistance value from time to time to get the Air Dirtiness Value. There are 3 air dirtiness levels, based on the Air Dirtiness Value: - Air Dirtiness level 0: Clean - Air Dirtiness level 1: Moderate - Air Dirtiness level 2: Contaminated
Dirtiness level sensitivity adjustment It is possible to change the gas sensor sensitivity, where the Threshold value (G1 ~ G4) will be shifted accordingly: 1. Press and release SET buttton. 2. Press Timer increment / Timer decrement button to select sensitivity. (Low Standard (Default) High) 3. Confirm setting by pressing Timer Set button. LCD returned to original display after 2 seconds. 4. LCD returned to original display if remote control does not operate for 30 seconds. b. e-ion Control When dirtiness level is 1 or 2, e-ion operation starts. If dirtiness level improves from level 2 to level 1, the unit carries out level change after 60 seconds. When dirtiness level returns to level 0 continuously for 10 minutes or more, e-ion operation stops. Dirtiness Level Shift For Auto Fan Speed, the fan speed increased based on dirtiness level:
c. Indoor Fan Control During any operation mode combines with Patrol operation, fan speed follows respective operation mode. During Patrol individual operation if e-ion starts, only Auto Fan Speed and no Powerful operation is allowed. Even if Fan Speed button is pressed, no signal is sent to air conditioner, and no change on LCD display. During Patrol individual operation if e-ion stops, Indoor Fan stop operation. d. Airflow direction (Horizontal, Vertical) Control During any operation mode combines with Patrol operation, airflow direction follows respective operation mode. During Patrol individual operation if e-ion starts, only Auto Air Swing is allowed. Even if Air Swing button is pressed, no signal is sent to air conditioner, and no change on LCD display. During Patrol individual operation if e-ion stops, Airflow direction louver closed.

Temperature, T, for: Indoor intake air ( C) Outdoor air ( C) Indoor heat exchanger ( C) Cooling/Soft Dry T < 15 or T T < 16 or T T < 38 T Heating T < 4 or T 0 24
13.2. Protection Control For Cooling & Soft Dry Operation
13.2.1. Outdoor Air Temperature Control
The compressor operating frequency is regulated in accordance to the outdoor air temperature as shown in the diagram below. This control will begin 1 minute after the compressor starts. Compressor frequency will adjust base on outdoor air temperature.
13.2.2. Cooling Overload Control
Detects the Outdoor pipe temperature and carry out below restriction/limitation (Limit the compressor Operation frequency) The compressor stop if outdoor pipe temperature exceeds 61 C If the compressor stops 4 times in 20 minutes, Timer LED blinking (F95 indicated: outdoor high pressure rise protection)
13.2.3. Freeze Prevention Control
1. 2. 3. 4. When indoor heat exchanger temperature is lower than 0 C continuously for 6 minutes, compressor will stop operating. Compressor will resume its operation 3 minutes after the indoor heat exchanger is higher than 13 C. At the same time, indoor fan speed will be higher than during its normal operation. If indoor heat exchanger temperature is higher than 13 C for 5 minutes, the fan speed will return to its normal operation.
13.2.4. Dew Prevention Control 1
To prevent dew formation at indoor unit discharge area. This control will be activated if: - Outdoor air temperature and Indoor pipe temperature judgment by microcontroller is fulfilled. - When Cooling or Dry mode is operated more than 20 minutes or more. This control stopped if: - Compressor stopped. - Remote control setting changed (fan speed / temperature). - Outdoor air temperature and indoor intake temperature changed. Fan speed, angle of louver (vertical airflow angle) will be adjusted accordingly in this control. - Fan speed will be increased slowly if the unit is in quiet mode but no change in normal cooling mode. - The angle of horizontal louver will be changed as table below:
Operation Mode Cooling and e-ion Airflow Direction 1 Auto Manual 2 Vane Angle ( ) ~ 4 5
13.2.5. Dew Prevention Control 2

To prevent dew formation at indoor unit discharge area. This control starts if all conditions continue for 20 minutes: - Operated with Cooling or Soft Dry Mode. - Indoor intake temperature is between 25 C and 29 C. - Outdoor air temperature is less than 30 C. - Quiet Lo fan speed. This control stopped if: - When receive air swing change signal from Remote Control. The horizontal louver will be fixed at 24 (regardless of Auto or Manual Airflow Direction Setting).
13.3. Protection Control For Heating Operation
13.3.1. Intake Air Temperature Control
Compressor will operate at Max freq. if either one of the below conditions occur: 1. When the indoor intake air temperature is 30 C or above.
13.3.2. Outdoor Air Temperature Control
The Max current value is regulated when the outdoor air temperature rise above 16 C in order to avoid compressor overloading.
13.3.3. Overload Protection Control
The compressor operating frequency is regulated in accordance to indoor heat exchanger temperature as shown below. If the heat exchanger temperature exceeds 60 C, compressor will stop.
13.3.4. Low Temperature Compressor Oil Return Control
In heating operation, if the outdoor temperature falls below -10 C when compressor starts, the compressor frequency will be regulated up to 600 seconds.
13.3.5. Cold Draught Operation
When indoor pipe temperature is low, cold draught operation start where indoor fan speed will be reduced.

13.3.6. Deice Operation

When outdoor pipe temperature and outdoor air temperature is low, deice operation start where indoor fan motor and outdoor fan motor stop and operation LED blinks.

14 Servicing Mode

14.1. Auto OFF/ON Button
1. AUTO OPERATION MODE The Auto operation will be activated immediately once the Auto OFF/ON button is pressed. This operation can be used to operate air conditioner with limited function if remote control is misplaced or malfunction. 2. TEST RUN OPERATION (FOR PUMP DOWN/SERVICING PURPOSE) The Test Run operation will be activated if the Auto OFF/ON button is pressed continuously for more than 5 seconds. A beep sound will heard at the fifth seconds, in order to identify the starting of Test Run operation (Forced cooling operation). Within 5 minutes after Forced cooling operation start, the Auto OFF/ON button is pressed for more than 5 seconds. A 2 beep sounds will heard at the fifth seconds, in order to identify the starting of Forced heating operation. The Auto OFF/ON button may be used together with remote control to set / change the advance setting of air conditioner operation.
3. REMOTE CONTROL NUMBER SWITCH MODE The Remote Control Number Switch Mode will be activated if the Auto OFF/ON button is pressed continuously for more than 11 seconds (3 beep sounds will occur at 11th seconds to identify the Remote Control Number Switch Mode is in standby condition) and press any button at remote control to transmit and store the desired transmission code to the EEPROM. For transmission code selection explanation, please refer to Select Remote Control Transmission Code. 4. REMOTE CONTROL RECEIVING SOUND OFF/ON MODE The Remote Control Receiving Sound OFF/ON Mode will be activated if the Auto OFF/ON button is pressed continuously for more than 16 seconds (4 beep sounds will occur at 16th seconds to identify the Remote Control Receiving Sound Off/On Mode is in standby condition) and press AC Reset button and then press Check button at remote control. Press Auto OFF/ON button to toggle remote control receiving sound. - Short beep: Turn OFF remote control receiving sound. - Long beep: Turn ON remote control receiving sound. After Auto OFF/ON Button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON Mode is restarted.

Cooling Mode Condition of the air conditioner Electric current during operating Heating Mode Electric current during operating

Low Pressure

High Pressure
Insufficient refrigerant (gas leakage)
Clogged capillary tube or Strainer
Short circuit in the indoor unit
Heat radiation deficiency of the outdoor unit

Inefficient compression

Carry out the measurements of pressure, electric current, and temperature fifteen minutes after an operation is started.
15.2. Breakdown Self Diagnosis Function
15.2.1. Self Diagnosis Function (Three Digits Alphanumeric Code)
Once abnormality has occurred during operation, the unit will stop its operation, and Timer LED blinks. Although Timer LED goes off when power supply is turned off, if the unit is operated under a breakdown condition, the LED will light up again. In operation after breakdown repair, the Timer LED will no more blink. The last error code (abnormality) will be stored in IC memory. To make a diagnosis 1. Timer LED start to blink and the unit automatically stops the operation. 2. Press the CHECK button on the remote controller contiguously for 5 seconds. 3. - - will be displayed on the remote controller display. Note: Display only for - -. (No transmitting signal, no receiving sound and no Power LED blinking.) 4. Press the TIMER or button on the remote controller. The code H00 (no abnormality) will be displayed and signal will be transmitted to the main unit. 5. Every press of the button (up or down) will increase abnormality numbers and transmit abnormality code signal to the main unit. 6. When the latest abnormality code on the main unit and code transmitted from the remote controller are matched, power LED will light up for 30 seconds and a beep sound (continuously for 4 seconds) will be heard. If no codes are matched, power LED will light up for 0.5 seconds and no sound will be heard. 7. The breakdown diagnosis mode will be canceled unless pressing the CHECK button continuously for 5 seconds or operating the unit for 30 seconds. 8. The LED will be off if the unit is turned off or the RESET button on the main unit is pressed. To display memorized error (Protective operation) status 1. Turn power on. 2. Press the CHECK button on the remote controller contiguously for 5 seconds. 3. - - will be displayed on the remote controller display. Note: Display only for - -. (No transmitting signal, no receiving sound and no Power LED blinking.) 4. Press the TIMER or button on the remote controller. The code H00 (no abnormality) will be displayed and signal will be transmitted to the main unit. The power LED lights up. If no abnormality is stored in the memory, three beeps sound will be heard. 5. Every press of the button (up or down) will increase abnormality numbers and transmit abnormality code signal to the main unit. 6. When the latest abnormality code on the main unit and code transmitted from the remote controller are matched, power LED will light up for 30 seconds and a beep sound (continuously for 4 seconds) will be heard. If no codes are matched, power LED will light up for 0.5 seconds and no sound will be heard. 7. The breakdown diagnosis mode will be canceled unless pressing the CHECK button continuously for 5 seconds or operating the unit for 30 seconds. 8. The same diagnosis can be repeated by turning power on again.

To clear memorized error (Protective operation) status after repair: 1. Turn power on (in standby condition). 2. Press the AUTO button for 5 seconds (A beep receiving sound) on the main unit to operate the unit at Forced Cooling Operation modes. 3. Press the CHECK button on the remote controller for about 1 second with a pointed object to transmit signal to main unit. A beep sound is heard from main unit and the data is cleared. Temporary Operation (Depending on breakdown status) 1. Press the AUTO button (A beep receiving sound) on the main unit to operate the unit. (Remote control will become possible.) 2. The unit can temporarily be used until repaired.
Error Code H23 H27, H28 Operation Cooling Cooling, Heating Temporary items Emergency Operation with limited power

15.3. Error Codes Table

Diagnosis display H00 H11 H12 H14 H15 H16 H19 H23 H25 H27 H28 Abnormality / Protection control No abnormality detected Indoor / outdoor abnormal communication Connection capability rank abnormal Indoor intake air temperature sensor abnormality Outdoor compressor temperature sensor abnormality Outdoor Current Transformer open circuit Indoor fan motor merchanism lock Indoor heat exchanger temperature sensor abnormality E-Ion breakdown Outdoor air temperature sensor abnormality Outdoor heat exchanger temperature sensor abnormality Indoor/Outdoor wrong connection Indoor/outdoor mismatch (brand code) Abnormal gas sensor Indoor high pressure protection Indoor heat exchanger anti-freezing protection Cooling / Heating cycle changeover abnormality PFC control Refrigeration cycle abnormal Outdoor compressor abnormal revolution Cool high pressure protection IPM (power transistor) overheating protection Outdoor compressor overheating protection Total running current protection Outdoor Direct Current (DC) peak detection Abnormality Judgement > 1 min after starting operation Continue for 5 sec. Continue for 5 sec. 7 times occurance continuously. Continue for 5 sec. Continue for 5 sec. Continue for 5 sec. Emergency operation Normal operation Indoor fan operation only O (Cooling only) O O Internal / external cable connections Indoor / Outdoor PCB Intake air temperature sensor (detective or disconnected) Compressor temperature sensor (detective or disconnected) Outdoor PCB IPM (Power transistor) module Indoor PCB Fan motor Heat exchanger temperature sensor (defective or disconnected) Indoor PCB E-Ion PCB Outdoor temperature sensor (defective or disconnected) Outdoor heat exchanger temperature sensor (defective or disconnected) Indoor/Outdoor supply voltage Gas sensor (defective or disconnected) Air filter dirty Air circulation short circuit Insufficient refrigerant Air filter dirty 4-way valve V-coil Voltage at PFC No refrigerant (3-way valve is closed) Outdoor compressor Outdoor refrigerant circuit Excess refrigerant Improper heat radiation IPM (Power transistor) Insufficient refrigerant Compressor Excess refrigerant Improper heat radiation Outdoor PCB IPM (Power transistor) Compressor Primary location to verify

H33 H38 H58 H98 H99 F11 F90 F91 F93 F95 F96
Continue for 6 hours 4 times occurance within 30 minutes 4 times occurance within 20 minutes 2 times occurance within 20 minutes 4 times occurance within 20 minutes 4 times occurance within 20 minutes

F97 F98 F99

4 times occurance within 20 minutes 3 times occurance within 20 minutes 7 times occurance continuously
Note: O - Frequency measured and fan speed fixed. The memory data of error code is erased when the power supply is cut off, or press the Auto Switch until beep sound heard following by pressing the CHECK button at Remote Control. Although operation forced to stop when abnormality detected, emergency operation is possible for certain errors (refer to Error Codes Table) by using Remote Control or Auto Switch at indoor unit. However, the Remote Control signal receiving sound is changed from one beep to four beep sounds.
16 Disassembly and Assembly Instructions
High voltages are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
16.1. Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal Procedures
16.1.1. To remove front grille
16.1.2. To remove power electronic controller
16.1.3. To remove discharge grille
16.1.4. To remove control board
16.1.5. To remove cross flow fan and indoor fan motor
16.2. Outdoor Electronic Controller Removal Procedure
Caution! When handling electronic controller, be careful of electrostatic discharge. 1. Remove the 3 screws of the Top Panel. 5. Remove the Control Board as follows:

Fig. 1

2. Remove the 6 screws of the Front Panel.

Fig. 4

Fig. 2
3. Remove the screw of the Terminal Board Cover. 4. Remove the Top Cover of the Control Board by 4 hooks.

Fig. 5

Fig. 6

Fig. 3

17 Technical Data
17.1. Operation Characteristics
17.1.1. CS-CE7HKEW CU-CE7HKE
17.1.2. CS-CE9HKEW CU-CE9HKE
17.1.3. CS-CE12HKEW CU-CE12HKE

doc1

Order No. PHAAM1004150A2

Air Conditioner

CS-ME7KB1E

Please file and use this manual together with the service manual for Model No. CU-2E15LBE CU-2E18LBE CU-3E18LBE CU-4E23LBE, Order No. PHAAM1003090C3 and Model No. CS-ME7CKPG CS-ME10CKPG CS-ME12CKPG CS-ME14CKPG CS-ME18CKPG CU-2E15CBPG CU-2E18CBPG CU-3E23CBPG CU-4E27CBPG, Order No. RAC0209005C2

TABLE OF CONTENTS

PAGE 1 Safety Precautions----------------------------------------------- Features ------------------------------------------------------------- Functions ----------------------------------------------------------- 5 3.1. REMOTE CONTROL ------------------------------------- 5 3.2. INDOOR UNIT --------------------------------------------- Product Specifications ----------------------------------------- Dimensions--------------------------------------------------------- 9 5.1. Cassette Type ---------------------------------------------- 9 5.2. Grille --------------------------------------------------------- Refrigeration Cycle Diagram --------------------------------Block Diagram----------------------------------------------------Wiring Connection Diagram --------------------------------Electronic Circuit Diagram -----------------------------------Operation Details (Functions & Protection) ------------17 10.1. Simultaneous Operation Control----------------------17 10.2. Airflow Direction Control --------------------------------18 10.3. Indoor Fan Control ---------------------------------------19 PAGE 10.4. Drain Pump Control ------------------------------------- 20 10.5. Auto Restart Control------------------------------------- 21 10.6. Other Indoor Unit Operation Functions ------------- 22 Installation Instruction ---------------------------------------- 29 Disassembly of Parts ------------------------------------------ 34 12.1. Detaching the fan motor and cross flow fan------- 34 12.2. Detaching the drain pump ----------------------------- 35 12.3. Detaching the control board --------------------------- 35 12.4. Detaching the louver motor---------------------------- 37 Technical Data --------------------------------------------------- 38 13.1. Operation Characteristics (CU-3E18LBE) --------- 38 13.2. Operation Characteristics (CU-4E23LBE) --------- 40 13.3. Operation Characteristics (CU-4E27CBPG) ------ 42 Exploded View and Replacement Parts List ----------- 44 14.1. Exploded View -------------------------------------------- 44 14.2. Replacement Parts List--------------------------------- 45
Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2010. Unauthorized copying and distribution is a violation of law.

1 Safety Precautions

Read the following SAFETY PRECAUTIONS carefully before perform any servicing. Electrical work must be installed or serviced by a licensed electrician. Be sure to use the correct rating of the power plug and main circuit for the model installed. The caution items stated here must be followed because these important contents are related to safety. The meaning of each indication used is as below. Incorrect installation or servicing due to ignoring of the instruction will cause harm or damage, and the seriousness is classified by the following indications.
This indication shows the possibility of causing death or serious injury.
This indication shows the possibility of causing injury or damage to properties.
The items to be followed are classified by the symbols:
This symbol denotes item that is PROHIBITTED from doing.
Carry out test run to confirm that no abnormality occurs after the servicing. Then, explain to user the operation, care and maintenance as stated in instructions. Please remind the customer to keep the operating instructions for future reference.
1. Engage dealer or specialist for installation and servicing. If installation or servicing done by the user is defective, it will cause water leakage, electrical shock or fire. 2. Install according to this installation instructions strictly. If installation is defective, it will cause water leakage, electrical shock or fire. 3. Use the attached accessories parts and specified parts for installation and servicing. Otherwise, it will cause the set to fall, water leakage, fire or electrical shock. 4. Install at a strong and firm location which is able to withstand the set's weight. If the strength is not enough or installation is not properly done, the set will drop and cause injury. 5. For electrical work, follow the local national wiring standard, regulation and the installation instruction. An independent circuit and single outlet must be used. If electrical circuit capacity is not enough or defect found in electrical work, it will cause electrical shock or fire. 6. Use the specified cable and connect tightly for indoor / outdoor connection. Connect tightly and clamp the cable so that no external force will be acted on the terminal. If connecting or fixing is not perfect, it will cause heat-up or fire at the connection. 7. Wire routing must be properly arranged so that control board cover is fixed properly. If control board cover is not fixed perfectly, it will cause heat-up or fire at connection point of terminal, fire or electrical shock. 8. When connection the piping, do not allow air or any substances other than the specified refrigerant to enter refrigeration cycle. Otherwise, this may lower capacity, cause abnormal high pressure in the refrigeration cycle, and possibly result in explosive and injury. 9. Thickness of copper pipes used must be more than 0.8mm. Never use copper pipes thinner than 0.8mm.

10. It is desirable that the amount of residual oil is less than 40mg/10m. 11. Do not modify the length of the power supply cord or use of the extension cord, and do not share the single outlet with other electrical appliances. Otherwise, it will cause fire or electrical shock.
1. The equipment must be earthed. It may cause electrical shock if grounding is not perfect. 2. Do not install the unit at place where leakage of flammable gas may occur. In case gas leaks and accumulates at surrounding of the unit, it may cause fire. 3. Carry out drainage piping as mentioned in installation instructions. If drainage is not perfect, water may enter the room and damage the furniture.
4. Pb free solder has a higher melting point than standard solder; typically the melting point is 50F - 70F (30C - 40C) higher. Please use a high temperature solder iron. In case of the soldering iron with temperature control, please set it to 700 20F (370 10C). Pb free solder will tend to splash when heated too high (about 1100F / 600C).
1. Selection of the installation location. Select an installation which is rigid and strong enough to support or hold the unit, and select a location for easy maintenance. 2. Power supply connection to the air conditioner. Connect the power supply cord of the air conditioner to the mains using one of the following methods. Power supply point shall be the place where there is ease for access for the power disconnection in case of emergency. In some countries, permanent connection of this room air conditioner to the power supply is prohibited. i. Power supply connection to the receptacle using a power plug. Use an approved power plug with earth pin for the connection to the socket. ii. Power supply connection to a circuit breaker for the permanent connection. Use an approved circuit breaker for the permanent connection. It must be a double pole switch with a minimum 3.5 mm contact gap. 3. Do not release refrigerant during piping work for installation, servicing, reinstallation and during repairing a refrigerant parts. Take care of the liquid refrigerant, it may cause frostbite. 4. Installation work: It may need two people to carry out the installation or servicing work. 5. Do not install this appliance in a laundry room or other location where water may drip from the ceiling, etc.

2 Features

Product - A single OUTDOOR unit enables air conditioning of up to four separate rooms
Remarks: 1. At least two indoor units must be connected. 2. The total nominal cooling capacity of indoor units that will be connected to outdoor unit must be within connectable capacity range of outdoor unit. (Shown in the above table) Example: The below indoor units combination is not possible to connect CU-3E23LBE. (Total nominal capacity of indoor unit is between 5.0kW and 10.0kW) 1) Two CS-ME7KB1E only. (Total nominal cooling capacity is 4.4kW) - Inverter controlled for High energy efficiency and optimal comfort - New refrigerant R410A is used for protecting ozone layer - Lead - free P.C. Board Serviceability - Self diagnosis - Test Run at both Cooling and Heating rated frequency Built-in drain pump - A drain pump is built in. The pipe can rise to 200 mm above the drain outlet.

3 Functions

3.1. REMOTE CONTROL

INDOOR UNIT

4 Product Specifications
Model Item Power Source Air Volume Cooling Heating Noise Level Cooling (Power) Heating (Power) Moisture Removal Refrigeration piping Connection Type of pipe Type of Indoor/ Outdoor connecting cable Drain opening Dimension Net Weight Fan Type Motor Heat exchanger Adjustments Switches Timer Temperature Air filter Type Output W mm mm mm kg
CS-ME7KB1E Cassette Type Outdoor power (single 230V 50Hz) m3/min m /min dB (A) (dB) dB (A) (dB) L/h Liquid Gas mm mm
9.1 10.1 Hi:40(53) Lo: 32(45) Hi:42(55) Lo: 32(45) 1.3 6.35 (1/4") Flare to the main unit 9.52 (3/8") Flare to the main unit CZ-3F 4 x 1.5 mm flexible cord, type designation 245 IEC 57 (H05RN-F) VP20 Height 185 x Width 770 x Depth 360 9.8 Cross-flow fan DC brushless motor (ARW50A8P30AC) 4P 25W 40V A98258 Plate fin forced-draft Wireless remote control Timer with ON and OFF times programmable Electronic thermostat PP honeycomb
* Specifications are subject to change without notice for further improvement.

5 Dimensions

5.1. Cassette Type

Grille

6 Refrigeration Cycle Diagram

7 Block Diagram

8 Wiring Connection Diagram
9 Electronic Circuit Diagram
10 Operation Details (Functions & Protection)
10.1. Simultaneous Operation Control

1. Operation modes which can be selected using the remote control unit: Automatic, Cooling, Soft Dry, Heating, Fan operation mode. 2. Types of operations modes which can be performed simultaneously Cooling operation and cooling, Dry or fan operation Heating operation and heating operation 3. Types of operation modes which cannot be performed simultaneously While a cooling operation is in progress, a heating operation cannot be performed by an indoor unit in another room. In the room where the operation button for cooling was pressed first, the operation is continued. In the room where the operation button for heating was pressed afterward, the operation lamp of the indoor unit blinks, where the attempt is made to establish the heating operation. Its fan is stopped, and the air does not discharged. While a heating operation is in progress, a cooling operation cannot be performed by an indoor unit in another room. In the room where the operation button for heating was pressed first, operation is continued. In the room where the operation button for cooling was pressed afterward, the operation lamp of the indoor unit blinks, where the attempt is made to establish the cooling operation. Its fan is stopped, and the air does not discharged. 4. Operation mode priority control The operation mode designated first by the indoor unit has priority. If the priority indoor unit stops operation or initiates the fan operation, the priority is transferred to other indoor units. Waiting denotes the standby status in which the operation lamp LED blinks (ON for 2.5 sec. and OFF for 0.5 sec.), and the fan is stopped.
* In the fan mode, priority is transferred to a non-priority unit. Note C: Cooling operation mode D: Soft Dry operation mode H: Heating operation mode F: Fan operation mode
10.2. Airflow Direction Control
The following shows how louver operation changes depending on the direction set with the AIR SWING button and other operating conditions.
The louver stops at the CLOSE position when the power switch or breaker is ON. The louver stops at their current position when the power switch or breaker is OFF. Move the horizontal airflow direction control louver manually.

10.3. Indoor Fan Control

The following shows how fan speed changes depending on the setting made with the FAN SPEED button and other operating conditions. Actual fan speed may differ from that you set with remote control.

10.4. Drain Pump Control

Basic operation The drain pump starts 50 seconds after the indoor unit starts or the thermostat comes on (i.e., 10 seconds after the fan motor starts). The drain pump stops 30 seconds after the indoor unit stops or the thermostat turns off. The drain pump repeats a cycle of on for 30 seconds then off for between 50 and 90 seconds as long as the unit is operating. Operation while the unit is off is determined by the difference between the temperature setting and the room temperature.

Float switch operation When the float switch turns on for 10 seconds continuously, the thermostat of the indoor unit turns off and the drain pump operates continuously. When the float switch stays on for 150 seconds continuously, the drain pump and indoor unit stop and the timer lamp flashes indicating an H21 error.
10.5. Auto Restart Control
if there is a power failure, operation will automatically be restarted when the power is resumed. It will start with the previous operation mode and airflow direction. (Time Delay Safety Control is valid) 1. Control start conditions <1> The 24-hour timer must not be set. <2> The sleep timer must not be set.
Auto restart control is not available when timer or sleep mode is set.
2. Description of control <1> In the case of manual operation, the operation mode, temperature setting, fan speed and airflow direction before the power is turned off are restored. <2> In the case of automatic operation, after the power is restored operation starts with the determination of the mode. <3> While the air conditioner odour clear timer has been set, the setting is cancelled, and operation is transferred to the mode before the power is turned off. <4> While the air conditioner odour clear operation (with timer / without timer setting) are being performed, both of these operations are completed, and operation is transferred to the operation mode prior to these operations.
Example: When the power is turned off during an outdoor unit cooling operation
10.6. Other Indoor Unit Operation Functions

10.6.1. Auto button

Proceed with operation when the air conditioner is stopped. (When the auto button is pressed during operation, the air conditioner is stopped.)
1. Emergency operation Press the auto button and release it within 5 seconds to perform emergency operation. Under normal condition (failure is not occurred) automatic operation is performed. In the event of a failure that still enables operation to be performed, emergency operation is performed. 2. Forced cooling operation Keep pressing the auto button until one beep sounds to perform the automatic cooling operation. The air conditioner does not operate for 2 minutes if the room temperature is low (intake temperature below 16 C) so just wait. The forced operation is performed after the 2 minutes have elapsed. 3. Forced heating operation First press the auto button until one beep sounds, and then set it to OFF.Now press the auto button until two beeps sound to perform the automatic heating operation. 4. Select Remote Control Transmission Code There are 4 types of remote control transmission code could be selected and stored in EEPROM of indoor unit. The indoor unit will only operate when received signal with same transmission code from remote control. This could prevent signal interference when there are 2 more indoor unit installed nearby together. To change remote control transmission code, short or open jumpers at the remote control printed circuit board.

10.6.2. Drain Test

When installing the unit and you want the drain pump to operate independently, press the DRAIN TEST switch to operate it for about 5 minutes.
10.6.3. Self Diagnosis display 10.6.3.1. BreakDown Self Diagnosis Function (Three Digits Alphanumeric Code)
Once abnormality has been detected during operation, the unit will immediately stop its operation. (Timer LED blinks.) Although timer LED goes off when power supply is turned off, if the unit is operated under a breakdown condition, the LED will light up again. In operation after breakdown repair, error code is not displayed. The last error code (abnormality) will be saved in IC memory. Timer LED Blinking in Abnormal Operation: 1. Automatically stops the operation. 2. Timer LED on display of the indoor unit blinks. 3. The LED will be off if the unit is turned off or the Error RESET button on the remote controller is pressed. To display memorized error (Protective operation) status: 1. Turn the unit on. 2. Press the CHECK button on the remote controller for continuously 5 seconds or more with a pointed object to appear -- on the display. 3. Press the TIMER or button on the remote controller to appear H00 on the display. Signal is transmitted to the main unit. 4. Press the TIMER button (When the button is pressed, the display goes back.) repeatedly and slowly until Beeps sound (about 5 seconds intermittently) is heard from main unit. 5. Then, displayed error code matches to the error code saved in unit memory. The power LED on the main unit also lights up. Note: When the CHECK button is pressed continuously for 5 seconds again, or when no operation continues for 30 seconds, or when the RESET button on remote controller is pressed with a pointed object, the display is cancelled. To clear memorized error (Protective operation) status after repair: 1. Press the AUTO button in main unit continuously for 5 seconds or more and release it. (Test run / Pump downoperation: Beep sound) 2. Press the CHECK button on remote controller for about 1 second with a pointed object to transmit signal to main unit. A beep sound is heard from main unit and the data is cleared. Temporary Operation (Depending on breakdown status) 1. Press the ON/OFF button after selecting Cooling or Heating operation. (Receiving Beep sound is heard and the TIMER LED blinks.) 2. The unit can temporarily be used until repaired.

10.6.4. Error Code

Symbol H11 Diagnosis Indoor/outdoor abnormal communication Diagnosis method This error occurs when indoor/outdoor unit communication fails to be established after 30 seconds or more. <Diagnosis checkpoint> 1. Measure the voltage of the indoor/outdoor unit communication cables, and check whether the voltage is being supplied properly to the outdoor unit or whether it is being returned from the outdoor unit to the indoor units. This error occurs when wrong in the total connection capacity and wrong connection in each capacity. The error is determined within 2 minutes after the power is turned on. <Diagnosis checkpoint> 1. Check the total capacity of the units connected and check that the models are compatible for connection. This error occurs when the intake air temperature has exceeded above 46 C continuously for 2 minutes or dropped below -54 C continuously for 5 seconds during operation. <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circulating (more than 500k ohms) or short-circulating (less than 6.5k ohms) is not found, defective contact of the connector is possible. When the total current has dropped below the set current level continuously for 20 seconds during operation beyond the set capacity, operation is stopped. Three minutes later, operation is started up again, and when the trouble occurs on 4 successive occasions, the error occurs (the timer lamp blinks). <Diagnosis checkpoint> 1. Check the refrigerating cycle: Gas may be leaking (the amount of refrigerant is extremely low). 2. Check the control P.C. Board: Check for a broken wire (open-circuit) in the current transformer. (If opencircuit is found, replace the control P.C. Board.) In the case of a scroll compressor (DC motor), H16 is detected only when the regular compressor is operating. High-voltage PWM: When a state in which the fan motor speed is not synchronized with the control signal has been detected on 7 successive occasions: Low-voltage PAM: When the fan lock detection signal has been detected on 7 successive occasions or it has been detected continuously for 25 seconds or when a state in which the fan motor speed is not synchronized with the control signal has been detected on 7 successive occasions: The error occurs (the timer lamp blinks). <Diagnosis checkpoint> 1. Check the nature of the fan lockup trouble. 2. Check for disconnections of the fan motor connectors and for defects in contact, in the fan motor and in the control P.C. Board. Error occurs when the float switch is open for 150 seconds. <Diagnosis checkpoint> 1. Drain blockage. 2. Check the conductivity of float switch. 3. Check that the resistance of the drain motor is about 200 ohms. This error occurs when a temperature of under approximately -40 C or above approximately 80 C has been detected by the heat exchanger temperature sensor continuously for 5 seconds. (This error is not detected during de-icing.) <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 2.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs when a temperature of under approximately -40 C or above approximately 150 C has been detected by the outdoor air temperature sensor for 2 to 5 seconds. (This error is not detected during de-icing.) <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs when a temperature of under approximately -60 C or above approximately 110 C has been detected by the heat exchanger temperature sensor for 2 to 5 seconds. (This error is not detected during deicing.) <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible.

Indoor unit capacity unmatched

Intake air temp. sensor

Outdoor Current Transformer
Indoor fan motor mechanism lock
Indoor float switch abnormality
Indoor heat exchanger temp. sensor

Outdoor air temp. sensor

Outdoor heat exchanger temp. sensor 1

Symbol H30

Diagnosis Outdoor discharge pipe temp. sensor
Diagnosis method Disconnected discharge sensor When the condensation temperature is higher than the discharge temperature + (plus) 6 C, a sensor disconnection is detected, operation stops, and the error occurs (the timer lamp blinks). <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs when a temperature of under approximately -60 C or over approximately 110 C has been detected continuously for 2 to 5 seconds by the outlet temperature sensor of the heat exchanger. <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs when a temperature of under -43 C or above 80 C has been detected by the outdoor unit radiator fin sensor continuously for 2 seconds. <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs if the float switch is open three times for 10 seconds or more during a twenty-minute period. <Diagnosis checkpoint> 1. Drain blockage. 2. Check the conductivity of float switch. 3. Check that the resistance of the drain motor is about 200 ohms. This error occurs when a temperature of under -45 C or above approximately 149 C has been detected by the outdoor unit gas side pipe temperature sensor continuously for 2 to 5 seconds. <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs when a temperature of under -45 C or above 149 C has been detected by the outdoor unit liquid side pipe temperature sensor continuously for 2 seconds. <Diagnosis checkpoint> 1. This error occurs when a temperature which is impossibly high or low from a normal standpoint has been detected. Check the sensor, and if open-circuit (more than 500k ohms) or short-circuit (less than 0.5k ohms) is not found, defective contact of the connector or a defective control P.C. Board is possible. This error occurs in rooms other than one in which indoor freezing error has occurred when the pipes have been connected incorrectly, when an outdoor expansion valve is defective or when an expansion valve connector has become disconnected. When the fan motor speed detected when its maximum output is demanded is below 30 rpm. continuously for 15 seconds, the fan motor stops for 3 minutes and then restarted. When this happens on 16 occasions (the error is cleared when the value is normal for 5 minutes), the H97 diagnostic symbol is stored in the memory, and the fan motor stops. <Diagnosis checkpoint> 1. Check the nature of the fan lockup error. 2. Check for disconnections of the fan motor connectors and for defects in contact, in the fan motor and in the control P.C. Board. The restriction on the compressor frequency is started when the temperature of the indoor unit heat exchanger source is between 50 C and 52 C, the compressor stops at a temperature from 62 C to 65 C, it is restarted 3 minutes later at below 62 C to 65 C, and the restriction on the compressor frequency is released at a temperature between 48 C and 50 C. (No error occurs.) <Diagnosis checkpoint> 1. Check the indoor unit heat exchanger temperature sensor (check for changes in its characteristics and check its resistance): Symptoms include no hot start when operation is started, a failure of the thermostat to turn on (no outdoor unit operation). And, frequent repetition of stopping and startup. 2. Check also for short-circuits indoors and clogging of the air filters.

Outdoor heat exchanger temp. sensor 2 (discharge pipe temp.)
Outdoor heatsink temp. sensor
Drainage or drain pump abnormality
Outdoor gas pipe temp. sensor
Outdoor liquid pipe temp. sensor
Abnormal indoor operating unit or standby units Outdoor fan motor mechanism lock
Indoor high pressure protection

Symbol H99

Diagnosis Indoor operating unit freezing
Diagnosis method The restriction on the compressor frequency is started when the indoor unit heat exchanger temperature is between 8 C and 12 C. Operation stops if a temperature below 0 C continues for 6 minutes. Three minutes later, operation is started up at a temperature from 3 C to 8 C. The restriction on the compressor frequency is released at a temperature between 13 C and 14 C. <Diagnosis checkpoint> 1. A cooling or dry mode operation conducted at a low outside air temperature is mainly to suspect: this is not indicative of any malfunctioning. If the outdoor air temperature rises during automatic operation in the winter months, the dry mode operation is selected. The H99 diagnostic display also appears at such a time. 2. Check the refrigerating cycle: Gas may be leaking (the amount of refrigerant is low) or a pipe may be broken, etc. 3. Check also for short-circuits indoors and clogging of the air filters.
4-way valve switching When a difference of 0 C to 5 C has been detected between the outdoor unit heat exchanger temperature failure and liquid side pipe temperature on 5 occasions, the error occurs. <Diagnosis checkpoint> 1. Check the 4-way valve coil: Check that no power is supplied to the coil during cooling and dry mode operations, and that power is supplied during heating operation. Inspect the coil for broken wires (opencircuit). 2. If the coil trouble-free, the switching action of the 4-way valve may be defective. Indoor standby units freezing When the difference of an intake temperature (room temperature sensor) and the indoor unit heat exchanger temperature (piping sensor) is higher than 10 C or an indoor unit heat exchanger temperature of below -1 C has been detected continuously for 5 minutes, operation stops. Three minutes later, it is started up, and the error occurs when this has occurred on 3 consecutive occasions. <Diagnosis checkpoint> 1. Check the refrigerating cycle: Expansion valve leakage. 2. Check the indoor unit pipe temperature sensor. (Check for changes in its characteristics and check its resistance.)
PFC circuit protection When a DC voltage over 393V to 424V has been detected on 16 occasions, this error occurs. <Diagnosis checkpoint> 1. To check whether the shutting valve has been left close by mistake, operation is performed for one to several minutes after the compressor has started up, F93 is stored in the memory as the symptom, and operation stops. 2. Check the inverter circuit (for open-circuiting) in the control P.C. Board: Check the IPM base current (6 locations) within 3 minutes after the power has been turned back on. As the symptom, F93 is stored in the memory 30 seconds after the compressor has started up, and operation stops. The error occurs after 4 restarts. 3. Check for broken wires (for open-circuiting) in the compressor winding: Approximately 1 ohm under normal conditions for each phase (same symptom as in 2.) 4. Check the power supply voltage has been fluctuating or not. Refrigeration cycle abnormality When the compressor frequency is above 55 Hz and the current drops below the prescribed level continuously for 7 minutes, operation stops, and it is restarted 3 minutes later. When the compressor discharge temperature has exceeded the setting and the expansion valve has remained fully open for 80 seconds, operation stops, and it is restarted 3 minutes later. When the stopping described above has occurred on 4 occasions, operation stops, and the error occurs. <Diagnosis checkpoint> 1. Check the refrigerating cycle: Gas may be leaking (more than one-half of the volume of the gas has gone). The diagnosis displays resulting from a gas leak generally change in the following sequence depending on the extent of the gas leak: H99 F97 F91 H16. The range of this error (F91) is limited. (Compressor protection at the start of the season) When a state in which the rotation of the compressor is not synchronized with the control signal has been detected on 8 successive occasions, operation stops, and the error occurs. <Diagnosis checkpoint> 1. To check whether the shutting valve has been left close by mistake, operation is performed for one to several minutes after the compressor has started up, F93 is stored in the memory as the symptom, and operation stops. 2. Check the inverter circuit (for open-circuit) in the control P.C. Board: Check the IPM base current (6 locations) within 3 minutes after the power has been turned back on. As the symptom, F93 is stored in the memory 30 seconds after the compressor has started up, and operation stops. The error occurs after 4 restarts. 3. Check for broken wires (open-circuit) in the compressor winding: Approximately 1 ohm under normal conditions for each phase (same symptom as in 2.) When error occurs from the electrical parts radiation fin temperature sensor and OLP output during operation, operation stops, and it is restarted 3 minutes later. If the trouble occurs on 4 occasions, operation stops, and the error occurs. <Diagnosis checkpoint> 1. Something may be interfering with the dissipation of the heat outdoors or the outdoor unit fan may be defective. (The outdoor unit fan is not running.) 2. Defective IPM (Outdoor unit control P.C. Board) 3. Gas leaks. Shutting valve is not opened.

Compressor abnormal revolution
IPM (Power transistor module) or compressor overheating

Symbol F97

Diagnosis Compressor high discharge temperature
Diagnosis method This error occurs and operation stops when this happens on 6 occasions (it is cleared when the operation is normal for 20 minutes). <Diagnosis checkpoint> 1. Check the refrigerating cycle: Gas may be leaking (The amount of refrigerant is low). The stopping of the outdoor unit from time to time is a symptom of this error. 2. When operation steps with this error occurs, check the compressor temperature sensor. (Check for changes in its characteristics and check its resistance.) 3. Something may be interfering with the dissipation of the heat outdoors or the outdoor unit fan may be defective. (The fan will not run because of open-circuiting.) (The protection may be activated by an overload, and the F97 error will remain stored in the memory.) When the total current exceeds the setting (17A to 20A), frequency control is started, and if it then exceeds the setting, operation stops, and the error occurs. <Diagnosis checkpoint> 1. Check the AC voltage at the outdoor unit terminal board during operation: The voltage drop must be within 5% of the voltage when operation has stopped (110% of rated voltage even during operation). If the voltage drop exceeds 5% of if the voltage changes suddenly, inspect whether the power supply cord and indoor/outdoor unit connection cables are too long or too small in diameter, etc. 2. Check whether something is interfering with the dissipation of the heat exchanger outdoors (during cooling operation): Normally, the capacity is limited by the current so that outdoor unit doesnt stop, and the diagnostic display does not appear. When Output current error, which occurs when the prescribed current level is exceeded, has occurred on 16 consecutive occasions, operation stops, and the error occurs. <Diagnosis checkpoint> 1. Check whether the compressor is defective (locked up or shorted winding). Check the outdoor unit control P.C. Board.
Total running current protection

DC peak detection

11 Installation Instruction

12 Disassembly of Parts

High voltages are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with repair work. Failure to heed this caution may result in electric shocks.
12.1. Detaching the fan motor and cross flow fan
1. Open the air inlet section of the front grille. 2. Unscrew the 4 screws on the front grille, then disengage the catches with a screwdriver and detach the front grille. 3. Loosen the screw on the cover and detach the cover. 4. Unscrew the 2 screws on the control section cover. 5. Detach the connectors going from the control board to the drain pump and from the receiver and display sections.

6. Unscrew the screw and disengage the 2 catches on the air outlet grille, then take out the drain pan plug to drain off excess water. 7. Unscrew the 4 screws and disengage the 5 catches on the drain pan.
8. Detach the air guide and unscrew the screw on the heat exchanger. 9. Detach the float switch and unscrew the 3 screws and disengage the 2 catches on the fan motor holder. 10. Loosen the screw fixing the shaft between the cross flow fan and the fan motor and detach the fan motor. 11. Remove the cross flow fan.
12.2. Detaching the drain pump
8. Unscrew the screw on the drain pump holder and detach it. 9. Detach the drain hose from the drain pump and remove the drain pump.
12.3. Detaching the control board
1. Open the air inlet section of the front grille. 2. Unscrew the 4 screws on the front grille, then disengage the catches with a screwdriver and detach the front grille.
3. Loosen the screw on the cover and detach the cover. 4. Unscrew the 2 screws on the control section cover and detach all connectors.
5. Disengage the catch on the control board and remove it.
12.4. Detaching the louver motor
3. Loosen the screw on the cover and detach the cover. 4. Unscrew the 2 screws on the control section cover and detach the connector for the louver motor. 5. Unscrew the screw and disengage the 2 catches on the air outlet grille.
6. Unscrew the 2 screws on the louver motor on the back of the air outlet grille and remove the louver motor.

13 Technical Data

13.1. Operation Characteristics (CU-3E18LBE)
13.1.1. One Indoor Unit Operation
13.2. Operation Characteristics (CU-4E23LBE)
13.2.1. One Indoor Unit Operation
13.3. Operation Characteristics (CU-4E27CBPG)
13.3.1. One Indoor Unit Operation
14 Exploded View and Replacement Parts List

14.1. Exploded View

Note The above exploded view is for the purpose of parts disassembly and replacement. The non-numbered parts are not kept as standard service parts.
14.2. Replacement Parts List
REF. NO. 62 FLOAT SWITCH THERMAL FUSE TERMINAL BOARD COMPLETE SENSOR COMPLETE TERMINAL PLATE FOR EARTH LEAD WIRE COMPLETE (AS) PC BOARD (MAIN) PC BOARD (RECEIVER) REMOTE CONTROL AIR SWING MOTOR FAN MOTOR EVAPORATOR DRAIN PUMP DRAIN CAP CHASSIS COMPLETE FAN MOTOR BRACKET PARTICULAR PLATE PARTICULAR PIECE-1 PARTICULAR PIECE-2 PARTICULAR PIECE-3 DRAIN PUMP BRACKET DISCHARGE GRILE COMPLETE LOUVER VERTICAL LOUVER DECORATION PANEL INSULATION SHEET CROSS-FLOW FAN COMPLETE CONTROL BOARD BOX CONTROL COVER-1 CONTROL COVER-2 CONTROL COVER-3 HOLDER SENSOR DRAIN TRAY BELT GUTTER BUSHING FOR DRAIN PUMP-1 BUSHING FOR DRAIN PUMP-2 BUSHING CAP (1/4) CAP (3/8) CAP FLUCRUM DRAIN PIPE DRAIN HOSE COMPLETE TUBE ASSY (3/8) TUBE ASSY (1/4) FLARE NUT (1/4) FLARE NUT (3/8) JOINT FOR DRAIN PIPE PART NAME & DESCRIPTION QTY. 1 CS-ME7KB1E CWA121207 CWA16C1047 CWA28K1045J CWA50C2100 CWA64C1005 CWA67C5811 CWA73C4647 CWA744084 CWA75C2610X CWA98169J ARW50A8P30AC CWB302119 CWB532010J CWB82018 CWD50C260 CWD54232 CWD66238 CWD76223 CWD76225 CWD91197 CWD93938 CWE20C2490 CWE24423 CWE24C101 CWE35K1007 CWG10468 CWH02K117X CWH10931 CWH131172 CWH13424 CWH13426 CWH32137 CWH40C1022 CWH4605004 CWH481002X CWH50196 CWH50197 CWH50198J CWH52061 CWH52062 CWH52160 CWH64C017 CWH851109 CWH85C1031 CWT022528 CWT024003 CWT251026 CWT251027 CWT29116 O O O O O O REMARKS O O O O

REF. NO. ZNR FUSE (250V 3A)
PART NAME & DESCRIPTION

QTY. 1

CS-ME7KB1E ERZVEAV511 XBA2C31TR0 CWF567435 CWF567436 CWF613731 CWF613732 CWF613733

REMARKS

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
(NOTE) Other parts except the operation manual and the installation manual are parts for RoHS. "l" marked parts are recommended to be kept in stock. All parts are supplied from ACD, JAPAN (VENDER CODE : 00025800).

Printed in Japan

 

Tags

Archos 204 DSI86 HD Software XSA-01010B Flasher T220P AR-90 TF-3239DL - 01 Review Titans Hedgehog GUC232A SLV-SX700B Picasso Midnight Star XR-5800R DSC-2100 Pocket GEX-P900dab-02 Motorola H710 RNS 510 NS-120 L1718S-BN DSL-G624M 21FJ8RL IR2018I AV-D35 4 1 Volvo XC90 WD20000A4NC 140-2 Touring KAM80 Thinkpad I 1600W 123 Game WEP750 Reflexes UE-32C6700 Notebook PC J-9940W 130CR-M Nokia X3 P7500 Z32LC6D DVP-S360 ZDT6255 Handheld PC 50PG10-UA Yamaha MO6 Glue GUN VPC-C5E Aspire 2010 1LE21S Yamaha D85 CQ-C9701N DIR-300 Software LN32B450 Conga Color 440 D-NE900 CW-29Z504N VC-FH30FPM PDV-70X SGH-U908 DTR7510 31D707 Press SV-SD510 HM80-155162E AVR 5000 MS-0745V PMH1000 F50870M RZ-29FB55RX Argos Fantom-S Mouse M305 Desktop 27-KC Primavera WF8502NGW LN46B650 ZWD1471W S740 K630I Urc-8011 20PF5320 Fusion CFD-G505 SNB5600 00 NV-VX27EG Workstation Easy 260 Zire 71 Cect A88 Active IN 1 Rapid 2

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101