Multi Split Outdoor Unit (CU-2E15GBE, CU-2E18CBPG,
Auto OFF/ON button CU-3E18EBE, CU-3E18JBE, CU3E23CBPG, CU-4E27CBPG, CU-4E23JBE) eion AIR PURIFYING SYSTEM

DEFINITION

Multi air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. e-ion filters
Used when remote control is misplaced or malfunction. Action Press once. Press and hold until 1 beep is heard, then release. Press and hold until 1 beep is heard, then release. Press again until 2 beeps, then release. Press the button to turn off. INDICATOR

PATROL SENSOR

Do not touch during operation Active e-ion Generator

Mode Auto Cooling

e-ion charging wire

INDOOR UNIT

It is possible to operate the indoor units individually or simultaneously. The operation mode priority is given to the first unit that turned on. During operation, heating and cooling mode could not be activated at the same time for different indoor unit. The power indicator blinks to indicate the indoor unit is standing by for different operation mode.

Heating

Receiver

=nMER =OUlfT

POWERFUL

c::::::::;;:;;;e-Ion

MilD DRY COOLING
(Blue) (Green) (Orange) (Orange) (Orange) (Blue) (Blue)

Maximum distances: 8m

Remote control display
OFF/ON@ PATROL MODE MI.D DRY COOLING

Caution

PATROL
and operations could be activated even when the air-conditioner is turned off. In this condition, once e-ion indicator is ON, the unit will operate with AUTO fan speed and air swing. However, this operation could not be activated or will be deactivated if other indoor unit is activating heating mode.
TIMER_-,-_--",::=->

ON. SET

AC CHECK CLOCK

CANCEL RC

Panasonic

CiNVERTER

TO TURN ON OR OFF THE UNIT

c:::J POWER

TO ENJOY CLEAN & FRESH AIR

TO SET THE TIMER

To turn ON or OFF the unit at a preset time.

ON -----,

OPTIONAL SETIINGS
Please be aware of the OFF indication on the remote control display to prevent the unit from starting/ stopping improperly.
Generates negative ions to produce fresh air effect and attract dust which will then be captured at the positively charged e-ion filters.

c:::J TIMER

Patrol starts automatically with the unit switched on with OfFION@ Press and hold for 5 seconds, then release to disable or restore this setting, Press and hold for 5 seconds to dim or restore the unit's indicator brightness. Press and hold for approximately 10 seconds to show temperature setting in C or oF. Press and hold for approximately 5 seconds to show 12-hour (am/pm) or 24-hour time indication. Press to restore the remote control's default setting. Not used in normal operations,

TO SET TEMPERATURE

TO MONITOR AIR QUALITY

.PATROLSENSOR,

Set the time.
Selection range: 16C - 30C. Operating the unit within the recommended temperature could induce energy saving. HEAT mode: 20C - 24C. COOL mode: 26C - 28'C. DRY mode: 1C - 2C lower than room temperature.
Patrol sensor detects air quality. When the air quality is unsatisfactory, e-ion operation will start automatically.

MILD DRY 'COOLING

Select ON or OFF timer.

Confirm.

To cancel ON or OFF timer, press TO IMPROVE HUMIDITY AND MOISTURE LEVEL (For single Split System)

MILDDRYCDOUNG

CANCEL.
TO SELECT OPERATION MODE AUTO mode - For your convenience During operation mode selection the power indicator blinks. Unit selects operation mode every 30 minutes according to temperature setting, outdoor and room temperature (For single Split System). Unit selects operation mode every 3 hours according to temperature setting, outdoor and room temperature (For Multi split system). HEAT mode To enjoy warm air Unit takes a while to warm up. The power indicator blinks during this operation. COOL mode To enjoy cool air DRY mode To dehumidify the environment Unit operates at low fan speed to give a gentle cooling operation.

FAN SPEED

This operation reduces air dryness and provides you with a comfortable living environment. When vertical airflow direction is set to AUTO, it stops at lower position to avoid cold air contact. However, you can adjust the louver direction manually.
When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. Timer operation is based on the clock set in the remote control and repeats daily once set. For clock setting, please refer to Remote Control Preparation at back cover. If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is resumed) by pressing SET I.
TO ENJOY QUIET ENVIRONMENT

c:::J QUIET

This operation reduces airflow noise.

TO ACHIEVE TEMPERATURE

QUICKLY

c:::J POWERFUL

Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode.
TO SELECT FAN SPEED (5 OPTIONS)

-+.-+ -+ -+ -+

For AUTO, the indoor fan speed is automatically adjusted according to the operation mode.

AIR SWING

TO ADJUST VERTICAL AIRFLOW DIRECTION (5 OPTIONS)

LAuro.-.". l.

7""J
, , and can be activated in all modes and can be cancelled by pressing the respective button again.

MILD DRY COOUNG

Keeps the room ventilated. If AUTO is set, the louvers swing up/down automatically. In heat mode, the air blows horizontally for a while, then starts to blow downwards.
-, only can be activated in COOL mode and can be cancelled by pressing the button again.

~~uO:J

and or -, not be selected at the same time.
and ~ can be activated even when the unit is turned off. In this condition, fan speed and air swing can not be adjusted. 7