Due to the ongoing innovation of our products, the specifications of this catalogue are valid barring typographic errors, and may be subject to minor modifications by the manufacturer without prior warning in order to improve the product. The total or partial reproduction of this catalogue is prohibited without the express authorisation of Panasonic UK Ltd.
Address: Panasonic Air Conditioning Panasonic House Willoughby Road, Bracknell Berks, RG12 8FP
Contact Details: E mail: aircon.info@panasonic.co.uk Telephone: www.panasonic.co.uk

www.panasonic.co.uk

eggeassociats
AIR-CONDITIONING UM R410A - ML4 & MX4 SERIES - INDUSTRIAL

2006/07

02 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 03
PRESENTATION | 03 THE NEW ERA IN INDUSTRIAL AIR-CONDITIONING | 04 DESIGN FLEXIBILITY | 06 EASY TO INSTALL | 08 HIGHLY-RELIABLE | 10 HIGH TECHNOLOGY FOR THE OUTDOOR UNITS | 12 MINI UM | 14 NEW OUTDOOR UNITS GREATER POWER IN LESS SPACE | 16 MX4 SERIES HEAT PUMP MINIMUM SPACE | 18 MX4 SERIES HEAT PUMP MAXIMUM COP | 20 INDOOR UNITS | 22 OUTDOOR UNITS DIMENSIONAL DRAWING | 36 LIST OF OPTIONAL ACCESSORIES | 38 BRANCHES AND HEADERS | 40 INDIVIDUAL CONTROL SYSTEMS | 42 CENTRALISED CONTROL SYSTEMS | 44 URBAN CONTROLLER | 46 UM NET | 48
REVOLUTIONARY INNOVATION!! NEW UM R410A INDUSTRIAL AIR-CONDITIONER MX4 SERIES
Following on from the recent introduction of R410A UM MX3 series, Panasonic has announced the introduction of revolutionary new product, MX4 series Inverter heat pump outdoor unit. The new MX4 series creates a further efficient air conditioning solution with greater design flexibility, a higher connection ratio, a wider line up of outdoor unit, longer piping lengths. Additionally, a unique refrigerant leakage control system helps commissioning work and improves the serviceability. All the current R410A UM indoor units can be connected to new MX4 series. Needless to say, EER/COP is also improved, whilst maintaining the size of cabinet and sound performance as the previous MX3 series. For more information, please connect to: www.panasonic.co.uk
04 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 05
THE NEW ERA IN INDUSTRIAL AIR CONDITIONING
NEW MX4 SERIES URBAN MULTI R410A SYSTEM BY PANASONIC Panasonic has developed the new MX4 VRF Inverter System, a major improvement on the system used in recent years. There are 5 premises which reflect the continued major improvement of our system: extended design options, improved performance, whilst retaing low noise levels, ease of instalation and high reliability. Five premises that open up the doors to the future of industrial air conditioning. Panasonic is the refererence point.
THE PATH FOR PANASONIC INDUSTRIAL AIR-CONDITIONING
MX4 INVERTER HEAT PUMP ALLOWS FAR MORE FLEXIBILITY + System Capacity is increased 12.5% from 5~54 HP. + Up to 64 indoor units can be connected, a 33% increase on the MX3. + It can be used to cool or heat from a single system + Control of up to 64 units with just one outdoor combination. + A broad range of capacity from 5 to 54 HP, in increments of 2 HP. + Customer design requirements either High COP or minimum footprint. + Up to 200% connection ratio, allowing cooling to be switched from one side of a building to the other to combat localised heat gains caused by morning or afternoon sunshine.
06 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 07

DESIGN FLEXIBILITY

UP TO 34% REDUCTION IN OUTDOOR UNITS The VRF MX4 inverter system drastically reduces the space required for installation, making it the most space-economising system in the sector. For example you only need one outdoor unit to obtain 18 HP, unlike the MX3 system, in which two units were necessary.
TOTAL FLEXIBILITY OF AIR CONDITIONING INSTALLATION The indoor cooling /heating capacity of the VRF MX4 inverter system can be extended by adding several indoor units to the existing system, when the outdoor has excess capacity. Indoor units up to 200% of the outdoor unit can be added to cover possible changes in floor layout. The installation can be designed around flexible outdoor unit combinations allowing for maximum operating efficiency (COP) or by the smallest footprint. The maximum 200% connection ratio, allows cooling to be switched from one side of a building to the other to combat localised heat gains caused by morning or afternoon sunshine.

1700 x 300 0.51 mx 300 0.29 m2
EXPANDED CONNECTION CAPACITY The new MX4 allows a massive connection capacity of up to 200% in the unit connection ratio, subject to outdoor and indoor model selection. Where the old MX3 10HP unit could only be connect to 16 indoor units the same capacity MX4 can connect 25 indoor units. This facility allows the switching of cooling / heating to be switched from one side of a building to another. DESIGNED FOR A QUICK INSTALLATION Now there is no need for cranes or hoists to transport the units to outside roofs. The small size of new outdoor units allows them to be transported to the roof by the lift of the building that is to be air-conditioned.

QUICK INSTALLATION

SIMPLIFIED WIRING The two core wiring system makes it possible to connect multiple indoor units to one outdoor unit, thus simplifying the installation. The wiring system has been designed both for communication between indoor and outdoor units and for the centralised control system. A high degree of control can be achieved with a simple wiring operation. Even if you a centralised control system, the only operation required is the connection of the control unit to the Outdoor units. REDUCTION OF SPACE COMPARED TO OTHER TYPES OF INSTALLATION The Urban Multi R410A's single cooling refrigerant circuit system permits major space reduction, since there is no need to allocate specific rooms to the machines in buildings, thus leveraging performance in available space. You are able to select the outdoor configuration dependant on your own requirement, either smallest footprint or High COP, you decide.

REDUCTION OF SPACE

URBAN MULTI R407C 40% reduction in pipe installation costs

URBAN MULTI R410A

All the Units can be transported in a lift

OTHER SYSTEM

URBAN MULTI
10 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 11

HIGHLY RELIABLE

THE HIGHEST PERFORMANCE High performance translates into savings in electricity consumption thanks to greater energy efficiency. This efficiency is due to the fact that since each room is individually controlled, only the rooms that require air-conditioning are heated or cooled. Moreover, thanks to the Inverter technology, the level of air conditioning can be controlled with precision depending on the status of each room. The high COP of our machines is attained using cutting edge technology such as the high efficiency G type compressor, reduced friction loss and specialist oil supply which all contribute to smooth and economical operation. Also the supply to the inverter type outdoor unit stops when in standby mode, when indoor units are turned off via the remote controller. (Reducing standby power by 30%).
MX1 2.Cooling 54 HP Heating 54 HP 3.80 3.56 4.17 Current MX3

ycles hot c

AC with inverter 210Hz-52Hz 20 Steps

Inverter Control

NEW REFRIGERANT CONTROL CIRCUIT The sub cooling of the refrigerant has been improved by the new E-Bridge circuit. This maintains the refrigerant liquid over longer distances with less refrigerant volume, thus permitting a reduction in piping diameter.

100% Large

OUTDOOR UNIT 10, 12 HP
NEW SMOOTHER SINE WAVE DC INVERTER By adopting a sine wave, the rotation of the compressor motor is smoothed, and thus increases efficiency considerably.

SINE WAVE INVERTER

Operation 0 to 100% of compressor No.1
210Hz-52Hz + Compressor No. steps
Operation 0 to 100% of compressor No. 2 14% Large
Comp. No. 1 Inverter Control Load Small
NEW RELUCTANCE DC COMPRESSOR The neodymium magnets provide greater motor torque and increases compressor efficiency. Moreover, a volume reduction of 70% is achieved.
THE SECRET TO INCREASING EFFICIENCY: POWERFUL MAGNETS
The neodymium magnet is 12 times more powerful than the ferrite magnet Stator rotary field Low pressure side
OUTDOOR UNIT 14, 16, 18 HP
100% Compressor control capacity 210Hz-52Hz + Compressor No. 2+No. steps Comp. Inverter Control No. 1 210-52 Hz Inverter control 20 steps Operation 0 to 100% of Comp. compressor No. 1 No. 1 Inverter control Operation 0 to 100% of compressor No. 3 10% Large Operation 0 to 100% of compressor No. 2 Load
Comp. No. 1 Inverter control

Suction

Discharge

High pressure side

DC reluctance motor

Neodymium magnet

Ferrite Magnet
Normal torque Reluctance torque
NEW COMPACT BOX The new distribution of the PCBs of the Inverter and the control optimises inside design and obtains a new, more compact and aerodynamic box, thus reducing the level of sound and energy required by the outdoor unit ventilator.
14 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 15

MINI UM

The whole indoor range with a single-phase outdoor unit.
All the indoor units of the UM series are available for the mini UM single-phase units. You can check out the characteristics of these indoor units on pages 24 to 35 of this catalogue.
Conditioning spaces can now take on a new dimension. If you have bought new premises or a new home which is still in the construction phase, or if you are refurbishing, panasonic offers you the chance to enjoy the global MINI UM air conditioning. The new improved MINI UM ML4 Series is the range of air-conditioners that elevates Panasonics experience in the air-conditioning of buildings and large areas with its VRF R410A technology Urban Multi Series.
The Urban Multi cutting-edge technology is perfectly suited to medium sized and small areas, with single-phase current, together with advanced Inverter technology, opening up new and unheard of possibilities in air-conditioning.

380, 415V 50 Hz 3 /

Air Flow Sound pressure level Dimensions (HxWxD) Weight Piping Connection Gas Refrigerant Liquid Compresor Quantity /Type Capacity Control Motor Nominal Output Amount / Type Motor Nominal Output

% kW Unit kW

55.9 61.52890 62.5 69.59340 15.20 17.00 15.30 17.10 3.68 3.62 4.08 4.x 1765 x 28.6 28.6 28.6 15.9 15.9 15.(1 x inv, 3 (2 x inv, 4 (2 x inv, 2 x on off) 1 x on off) 2 x on off) 9 ~ ~ ~ 100 3.0 + 3.8 + 1.2 + (4.5 x 2) 2.8+ 4.5 2.8 + 4.5
1 x Propeller Fan 0.35 0.75
0.75 + 0.75 0.75 + 0.75 0.75 + 0.75 0.75 + 0.75
Oil (type & load) Sinthetic Oil (Ester) Daphne FVC68D Regrigerant (Load)

1.7 6.2

2.10 7.7

3.9 8.4

3.9 8.6

5.7 12.3

5.7 12.5

5.8 12.7

2.1 + 3.9 7.7 + 8.6

3.9 + 3.9 8.4 + 8.6

3.9 + 3.9 8.6 + 8.6
1) Cooling capacity calculated on an indoor temperature of 27C TS dry thermometer), 19C TH (wet thermometer) and an outdoor temperature of 35C TS / 7.5 m refrigerant gas pipe (horizontal). 2) Heating capacity calculated on an indoor temperature of 20C. TS and an outdoor temperature of 7C TS, 6C TH / 7.5 m refrigerant gas tube (horizontal). Safety devices: high pressure switch, protection overload impulsion ventilator, Inverter overload protection, plug fuse. Finishes: Ivory white (5Y7,5/1)
20 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 21
MX4 SERIES HEAT PUMP MAXIMUM COP
MX4 HIGH COP COMBINATION U-16MX4XPQ U-18MX4XPQ U-20MX4XPQ U-22MX4XPQ U-24MX4XPQ U-26MX4XPQ U-28MX4XPQ U-30MX4XPQ U-32MX4XPQ U-34MX4XPQ U-36MX4XPQ

U-5MX4XPQ

U-8MX4XPQ 2 1
Model Independent Unit Models Cooling Capacity 1) Heating Capacity 2) Consumption COP Cooling Heating Cooling Heating 16 HP U-16MX4XPQ U-8MX4XPQ U-8MX4XPQ kW Kcal/h kW Kcal/h kW kW kW kW m3/min dB(A) mm Kg Inches Inches % kW unit kW L Kg 44,8 38.528 50,0 43.000 11,1 11,7 4,04 4,+ x 1765 x 765 28.6 12.x inv 3.8 + 3.x Propeller Fan 0.75 + 0.75 2.1 + 2.1 7.7 + 7.HP U-18MX4XPQ U-8MX4XPQ U-10MX4XPQ 50,4 43.344 56,5 48.590 13,0 13,6 3,88 4,+ x 1765 x 765 28.6 15.(2 x inv, 1 x on off) 3.8 + 1.2 + 4.x Propeller Fan 0.75 + 0.75 2.1 + 3.9 7.7 + 8.HP U-20MX4XPQ U-10MX4XPQ U-10MX4XPQ 56,0 48.160 63,0 54.180 14,8 15,4 3,78 4,+ x 1765 x 765 28.6 15.(2 x inv, 2 x on off) 1.2 + 1.2 (4.5 x 2) 2 x Propeller Fan 0.75 + 0.75 3.9 + 3.9 8.4 + 8.HP U-22MX4XPQ U-10MX4XPQ U-12MX4XPQ 61,5 52.890 69,0 59.340 17,0 17,1 3,62 4,+ x 1765 x 765 28.6 15.(2 x inv, 2 x on off) 1.2 + 2.8 (4.5 x 2) 2 x Propeller Fan 0.75 + 0.75 3.9 + 3.9 8.4 + 8.HP U-24MX4XPQ U-8MX4XPQ U-8MX4XPQ U-8MX4XPQ 67,2 57.792 75,0 64.500 16,7 18,9 4,02 3,+ 171 +x 2790 x 765 34.9 15.x inv 3.8 + 3.8 + 3.x Propeller Fan 0.75 + 0.75 + 0.75 2.1 + 2.1 + 2.1 7.7 + 7.7 + 7.HP U-26MX4XPQ U-8MX4XPQ U-8MX4XPQ U-10MX4XPQ 72,8 62.608 81,5 70.090 18,5 19,4 3,94 4,+ 171 +x 2790 x 765 34.9 19.(3 x inv, 1 x on off) 3.8 + 3.8 + 1.2 + 4.x Propeller Fan 0.75 + 0.75 + 0.75 2.1 + 2.1 + 3.9 7.7 + 7.7 + 8.HP U-28MX4XPQ U-8MX4XPQ U-10MX4XPQ U-10MX4XPQ 78,4 67.424 88,0 75.680 20,4 21,3 3,84 4,+ 185 +x 2790 x 765 34.9 19.(3 x inv, 2 x on off) 1.2 + 1.2 + 1.2 + (4.5 x 2) 3 x Propeller Fan 0.75 + 0.75 + 0.75 2.1 + 3.9 + 3.9 7.7 + 8.4 + 8.HP U-32MX4XPQ U-8MX4XPQ U-12MX4XPQ U-12MX4XPQ 89,4 76.884 94,5 100,0 81.270 86.000 22,3 24,8 23,1 24,7 0,00 3,60 4,09 4,+ 185 + + 196 + x 2790 x x 2790 x 765 34.9 34.9 19.1 19.(3 x inv, 3 x on off) 5 (3 x inv, 2 x on off) 1.2 + 1.2 + 1.2 + (4.5 x 3) 3.8 + 2.8 + 2.8 + (4.5 x 2) 3 x Propeller Fan 0.75 + 0.75 + 0.75 3.9 + 3.9 + 3.9 8.6 + 8.6 + 8.x Propeller Fan 0.75 + 0.75 + 0.75 2.1 + 3.9 + 3.9 7.7 + 8.6 + 8.HP U-30MX4XPQ U-10MX4XPQ U-10MX4XPQ U-10MX4XPQ 34 HP U-34MX4XPQ U-10MX4XPQ U-12MX4XPQ U-12MX4XPQ 95,0 81.700 107,0 92.020 26,7 26,6 3,56 4,+ 196 + x 2790 x 765 34.9 19.(3 x inv, 3 x on off) 1.2 + 2.8 + 2.8 + (4.5 x 3) 3 x Propeller Fan 0.75 + 0.75 + 0.75 3.9 + 3.9 + 3.9 8.4 + 8.6 + 8.HP U-36MX4XPQ U-12MX4XPQ U-12MX4XPQ U-12MX4XPQ 101,0 86.860 113,0 97.180 28,9 28,3 3,49 3,+ 196 + x 2790 x 765 34.9 19.(3 x inv, 3 x on off) 2.8 + 2.8 + 2.8 + (4.5 x 3) 3 x Propeller Fan 0.75 + 0.75 + 0.75 3.9 + 3.9 + 3.9 8.4 + 8.6 + 8.6

The automatic vertical swing moves the discharge fins upwards and downwards for efficient air distribution by the atmosphere. Since the fins can be placed parallel to the ceiling (0 position), it is practically impossible for draughts of air to form.
The installation of the outside air inlet is now made easier, using the new kit that does not require special chambers.

Outside Only 215 mm

CZ-10RWY12P

CZ-01RWU12P

0.8 HP 1 HP 1.3 HP S-20YM3HPS S-25YM3HPS S-32YM3HPS 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 / / / kW 2.2 2.8 3.6 Kcal/h 3100 kW 2.5 3.Kcal/h 3500 W 76 W 68 High dB(A) 32 Low dB(A) 26 dB(A) 49 High m3/h 570 Low m3/h 420 Inches (1/4) (1/4) (1/4) Inches (1/2) (1/2) (1/2) VP20 (external diameter 26, internal diameter 20) mm 286 x 575 x 575 mm 55 x 700 x 700 Kg 18 Kg 2.7 Galvanised steel plate White (10Y9/0.5) Polystyrene foam / Polyethylene foam Thermostat with microprocessor for cooling and heating Washable resin net PCB fuse, fan motor heat protector
1.5 HP S-40YM3HPS 220, 230V 50 Hz 1 / 4.480 (1/4) (1/2)
2 HP S-50YM3HPS 220, 230V 50 Hz 1 / 5.6.600 (1/4) (1/2)
Sound power level Fan Air Flow Piping connections Liquid Flared connection Gas Flared connection Drainage Dimensions Unit (HxWxD) Decorative panel Weight Unit Decorative panel Housing Decorative panel colour Heat and sound insulation Temperature control Air filter Safety devices
0.8 HP 1 HP 1.3 HP 1.5 HP 2 HP 2.5 HP S-20UM3HPQ S-25UM3HPQ S-32UM3HPQ S-40UM3HPQ S-50UM3HPQ S-63UM3HPQ 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 / / / / / / kW 2.2 2.8 3.6 4.5 5.6 7.1 Kcal/h kW 2.5 3.2 4.0 5.0 6.3 8.0 Kcal/h W W High dB(A) 31 cooling / 32 heating 34 Low dB(A) dB(A) High m3/h Low m3/h Inches (1/4) (1/4) (1/4) (1/4) (1/4) (3/8) Inches (1/2) (1/2) (1/2) (1/2) (1/2) (5/8) VP25 (external diameter 32, internal diameter 25) mm 230 x 840 x 840 mm 40 x 950 x 950 Kg 24 Kg 5 Galvanised steel plate White (10Y9/0.5) Polystyrene foam Thermostat with microprocessor for cooling and heating Washable resin net PCB fuse, fan motor heat protector, drainage pump heat fuse

3.2 HP S-80UM3HPQ 220, 230V 50 Hz 1 / 9.10.1200 (3/8) (5/8)
4.0HP S-100UM3HPQ 220, 230V 50 Hz 1 / 11.12.1260 (3/8) (5/8)
5.0 HP S-125UM3HPQ 220, 230V 50 Hz 1 / 14.16.1440 (3/8) (5/8)

288 x 840 x x 950 x 5

32 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 33
LOW SILHOUETTE DUCT FM3 SERIES
VERY FLEXIBLE FOR SEVERAL APPLICATIONS
LOW SILHOUETTE DUCT FM3 SERIES URBAN MULTI R410A
+ High flexibility of installation with the broad range of optional kits. + The unit may be installed with a false ceiling space of 350 mm (height of all units 300 mm). + Drainage pump is standard (625 mm). + High external static pressure. + Low sound levels (28 dB(A)). + Two types of optional high-performance filters available (65% and 95%). + Filter in standard models.

CZ-02RE12P

CZ-02RWF12P
POSSIBLE CONFIGURATION SCHEMES OF DUCT UNITS
Configuration of the lower part aspiration system Configuration of the false ceiling return system

Air conditioning unit

Sound power level Fan Air Flow Static Pressure 3) Piping Liquid Flared connection connections Gas Flared connection Drainage Dimensions Unit (HxWxD) Decorative panel Weight Unit Decorative panel Housing Decorative panel colour Heat and sound insulation Temperature control Air filter Safety devices
0.8 HP 1 HP 1.3 HP 1.5 HP 2 HP 2.5 HP S-20FM3HPQ S-25FM3HPQ S-32FM3HPQ S-40FM3HPQ S-50FM3HPQ S-63FM3HPQ 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 220, 230V 50 Hz 1 / / / / / / kW 2.2 2.8 3.6 4.5 5.6 7.1 Kcal/h kW 2.5 3.2 4.0 5.0 6.3 8.0 Kcal/h W W High dB(A) Low dB(A) dB(A) High m3/h Low m3/h mmH2O 4/9 4/9 4/9 5/9 5/9 5/9 Inches (1/4) (1/4) (1/4) (1/4) (1/4) (3/8) Inches (1/2) (1/2) (1/2) (1/2) (1/2) (5/8) VP25 (external diameter 32, internal diameter 25) mm 300 x 550 x x 700 x 800 300x1000x800 mm 55 x 650 x x 800 x 500 55x1100x500 Kg Kg 3 3.5 4.5 Galvanised steel plate White (10Y9/0.5) Polystyrene foam Thermostat with microprocessor for cooling and heating Washable resin net PCB fuse, fan motor heat protector, drainage pump heat fuse
3.2 HP S-80FM3HPQ 220, 230V 50 Hz 1 / 9.10.1200 5/9 (3/8) (5/8)
4.0HP S-100FM3HPQ 220, 230V 50 Hz 1 / 11.12.1230 5/9 (3/8) (5/8)

8 HP 10 HP S-200EM3HPS S-250EM3HPS 220, 230V 50 Hz 1 220, 230V 50 Hz 1 / / 22.25.0 31.3720 14/19 14/21 (3/8) (3/8) (3/4) (7/8) 470 x 1380 x 1100 137
1) Cooling capacity calculated on an indoor temperature of 27C TS dry thermometer), 19C TH (wet thermometer) and an outdoor temperature of 35C TS / 7.5 m refrigerant gas pipe (horizontal). 2) Heating capacity calculated on an indoor temperature of 20C TS and an outdoor temperature of 7C TS, 6C TH / 7.5 m refrigerant gas tube (horizontal).
36 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 37
OUTDOOR UNITS DIMENSIONAL DRAWING
U-5MX4XPQ U-14,16,18MX4XPQ
U-14,16,18MX4XPQ U-5MX4XPQ
No. Parts name 1 Liquid pipe connection port 2 Gas pipe connection port Grounding terminal Remarks 9.5 Flare connection 15.9 Brazing connection Inside of switch box (M8) 27 No. Parts name 1 Liquid pipe connection port 2 Gas pipe connection port 3 Grounding terminal Power cord routing hole (side) 5 Power cord routing hole (front) 6 Power cord routing hole (front) 7 Power cord routing hole (bottom) 8 Wire routing hole (front) 9 Pipe routing hole (front) 10 Pipe routing hole (bottom) 4 Remarks See note 2 See note 2 Inside of switch box (M8) 27 65.5 27
Power cord routing hole (side) 5 Power cord routing hole (front) 6 Power cord routing hole (front) 7 Power cord routing hole (bottom) 8 Wire routing hole (front) 9 Pipe routing hole (front) 10 Pipe routing hole (bottom)
NOTES 1. Detail for front side and detail for bottom side indicate the dimensions after fixing the attached piping.
NOTES 1. Detail for front side and detail for bottom side indicate the dimensions after fixing the attached piping. 2. Gas pipe [Heat pump type] 28.6 Brazing connection 1416P type Liquid pipe [Heat pump type] 15.9 Brazing connection 18P type 12.7 Brazing connection 1416P type

AA 83 63

Model name U-14,16MX4XPQ U-18MX4XPQ

AB 211

Model name U-14,16,18MX4XPQ

AC 179 160

U-8,10,12MX4XPQ
INSTALLATION AND SERVICE SPACE U-**MX4XPQ
No. Parts name 1 Liquid pipe connection port 2 Gas pipe connection port 3 Grounding terminal Power cord routing hole (side) 5 Power cord routing hole (front) 6 Power cord routing hole (front) 7 Power cord routing hole (bottom) 8 Wire routing hole (front) 9 Pipe routing hole (front) 10 Pipe routing hole (bottom) 4 Remarks See note 2 See note 2 Inside of switch box (M8) 27 65.5 27
NOTES 1. Detail for front side and detail for bottom side indicate the dimensions after fixing the attached piping. 2. Gas pipe [Heat pump type] 19.1 Brazing connection 8P type 28.6 Brazing connection 12HP type 22.2 Brazing connection 10P type Liquid pipe [Heat pump type] 9.5 Brazing connection 810P type 12.7 Brazing connection 12HP type

Concealed panel /air outlet
Rect installation Filter chamber for the above Long-life filter spare High calorimetric efficiency filter unit calorimetric method 65% calorimetric method 90% Ultra-long lasting filter spare Branching chamber Chamber connection kit
Output adapter panel for round pipe
* If installing a high-efficiency filter in the unit, a mounting chamber should be fitted to the lower or rear suction system.

CEILING TM3 SERIES

Long-life filter KAF501DA56 KAFJ501DA80
Decorative panel Panel separator Output air insulator Outside air inlet kit direct installation Long-life filter spare all all all all CZ-02KPY12P KDBQ44BA60A KDBHQ44BA60 KDDQ44XA60 KAFQ441BA60

WALL KM3 SERIES

Drainage pump all KDU421A63VE

CONTROL DEVICES

CZ-02RT11P CZ-02RE12P LM3 CZ-01RWL12P UM3 CZ-01RWU12P KM3 CZ-01RWK22P TM3 CZ-01RWT12P YM3 CZ-01RWY12P Wireless control DM3 CZ-02RWD12P (receptor on wall) EM3/FM3/NM3/PM3/RM3 CZ-02RWF12P Centralised control CZ-02ESM11P On/off controller (announcer) CZ-01ANA11P Programmer control CZ-01ESW11P CZ-ESM BMS Interface adapter CZ-302AP11P Interface adapter for US series CZ-102AP11P Signal output adapter other KRP1B61 BMS Interface adapter for UM3/TM3 KRP2A52 group or individual control other KRP2A51 Installation box for PCB adapter UM3 KRP1CA98 LM3 KRP1CA96 TM3 KRP1CA93 Electric box with grounding terminal (3 bloques) KJB311AA (2 bloques) KJB212AA Anti-noise filter KEK26-1A BMS Interface adapter for outdoor unit LM3/NM3 CZ-104AP11P UM3/FM3/TM3 CZ-104AP13P other CZ-104AP12P Expansion port for UM-NET CZ-109AP11P Wired controls Simple wiring control Wireless controls (Receiver integrated in machine)
LIST OF OPTIONAL ACCESSORIES
Decorative panel 20~32 40~80~125 CZ-01KPL11P CZ-02KPL11P CZ-03KPL11P CZ-06KPL11P
NOTE: The filter chamber is indispensable if a high-efficiency filter is installed
Decorative panel Panel separator Long-life filter spare Flexible duct (with shutter) 25~63 25~63 CZ-02KPD11P CZ-03KPD11P KPBJ52F80W KAFJ521F56 KAFJ521F80 KFDJ52F80

Drainage pump High-efficiency filter 65% High-efficiency filter 90% Filter chamber 40~125 200~250 40~63 80~125 40~63 80~125 40~63 80~125 200/250 40~63 80~125 200/250 KDU30L125VE KDU30L250VE KAFJ302L71 KAFJ302L140 KAFJ303L71 KAFJ303L140 KDDJ30L71 KDDJ30L140 KDJ3705L280 KAFJ301L71 KAFJ301L140 KAFJ371L280
40 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 41
REDUCTION AND EXPANSION OF THE BRANCH JOINTS

BRANCHES AND HEADERS

BRANCHES CZ-P20BK12QA HEADERS

3/4 5/8 1/2

BRANCHES: UNIFIED PIPING
This new system of piping has been designed to facilitate installation so that only 2 or 3 main refrigerant pipes are needed, unlike the systems used to date. Neither are 2- and 3-way check valves required, or anti-ice treatment, oil separators or an air valve. The use of the Branch piping combined with electronic expansion valves makes for a notable reduction in the imbalance of the refrigerant liquid flow between indoor units despite the smaller piping diameter. The joints for these pipes have been designed to reduce installation time, as they are easy to fit. Finally, the Branch pipes optimise refrigerant flow.
5/8 3/4 7/8 1/2 3/8 3/8 1/4

3/8 1/4

1/2 3/4 5/8

Liquid

Gas Joint reduction and expansion: 1,3
1 7/8 3/4 5/8 3/4 1/2 1/4(6x) 1/4(2x) 3/8 1/4 3/8 5/8 1/2 5/8 3/8(6x) 5/8 7/8 3/4 5/8 1/2 5/8 3/4 1/2(2x) 5/8(2x) 1/2(5x)

CZ-P29BK12QA

1/2 3/8
Liquid Joint reduction and expansion: 11

1/2 5/8 5/8 1/2 3/8

Gas Joint reduction and expansion: 6, 2 x 7

1-1/4 1-1/1 3/4 5/8

1/2(3x) 3/4(3x) 1 5/8(3x)

1/2(3x) 5/8(3x) 5/8(2x)

CZ-P64BK12Q
1/4(6x) 1/4(2x) 1/4 1/2 3/8 1/2 5/8 5/8 3/8(6x) 5/8

1-1/8 1-1/4

Liquid Joint reduction and expansion: 2 x 4

5/8 3/4 7/8 3/4 5/8 1/2

Gas Joint reduction and expansion: 6, 5, 7, 8
1-1/2 1-1/4 1-1/4 1-1/8 1

5/8(6x) 3/8(8x)

HOW TO SELECT THE LINE BRANCH PIPE
When using line branch pipe at the first branch counted from the outdoor unit side. Choose from the following table in accordance with the capacity of the outdoor unit.

EXTERNAL SIGNAL ADAPTER

CZ-TA30P + An external ventilator can be controlled to an internal unit. + External On / Off Remote Control of the interior unit. + Output status of the interior unit (operating mode, breakdown)

ADAPTER TO THE URBAN NET

CZ-TA40P + Connection board to the Urban NET for the centralized control of the interior units of the FS Range.

UNIFIED ON/OFF CONTROL

CZ-01ANA11P
It permits individual and simultaneous control of 16 groups of indoor units. + Up to 16 groups can be controlled (128 indoor units) + Use of 2 remote controls located in different places in the mode of operating (normal, alarm) + Centralised control indication + Maximum wiring length, 1000 m (total: 2000 m)

ADDRESSING ADAPTER

CZ-TA50P + Manual adjustment board for the directions of the interior units for the centralized control. Use for adjusting directions before connecting the power supply to the interior unit and whenever there is no remote control.

POWER SOURCE

CZ-TE20P + Power source for the Urban NET (One unit for each Urban NET network).
CENTRALISED REMOTE CONTROL

CZ-02ESM11P

Up to 64 groups of indoor units can be individually controlled (areas). + Up to 64 groups can be controlled (128 indoor units, maximum of 10 outdoor units) + Up to 128 groups can be controlled (128 indoor units, maximum of 10 outdoor units). By 2 central remote controls located in different places + Zone control + Fault code indicator + Maximum wiring length, 1000 m (total: 2000 m)
CONNECTION INTERFACE FOR THE URBAN NET AND UM NET
CZ-20GWAP + Controllable interior units: 64 + Control Functions On/Off, Operation Mode, Temperature Adjustment, Ventilator Velocity, Air Direction, Breakdown Information, Aspiration Temperature, Information about the state of the filter.
CENTRALISED CONTROL SYSTEMS
These controls may be independent or combined; in this latter modality, 1 group is equivalent to several indoor units (up to 16) combined, and 1 area, to several mixed groups. Centralised remote control is the ideal solution in the case of leased commercial buildings which may have different occupancy rates, since the indoor units can be distributed in groups by lessee (distribution by areas). The lessee can configure the programme and the operating conditions using the timer and easily restart the control according to the different needs.

URBAN CONTROLLER by Panasonic provides the perfect PCbased solution for building management control requirements; for Panasonic AIR-CONDITIONERS and a host of other products. URBAN CONTROLLER is a Windows-based software that provides different levels of control depending on user needs. Not only does URBAN CONTROLLER guarantee control over your air-conditioning, using our new DIO adapter also permits mechanical interactions with other elements of the building, such as fire alarms, lights, and anything you can imagine.
THE PROGRAMMER + Calendar programming of the installation operation. + Annual programming, making it possible to define 4 different types of days. + Summer / winter programming. Season specification. Automatic heat cold change. + Programming of each interior unit: off/on, operation mode (heat, cold, ventilation.), set temperature and remote control blockage. + Programming of each exterior device: off/on. + Setting of 10 daily programs. + Programming of up to 10 operating criteria (modes night, morning, extreme cold.).
48 AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL
AIR-CONDITIONING 2006/07 UM R410A - ML4 & MX4 SERIES - INDUSTRIAL 49
URBAN CONTROLLER CLIMATE CONTROL NETWORK IN COMBINATION WITH THE FS RANGE
REMOTE ALARM / FAULT REPORTING
THE URBAN CONTROLLER PERMITS CONTROLLING THE CLIMATE CONTROL AND, AT THE SAME TIME, A WHOLE SERIES OF EXTERNAL DEVICES THAT INCLUDE SAFETY IN A HOME, BUSINESS, BUILDING OR PLANT. FIRE ALARMS, ANTITHEFT ALARMS, E-MAIL CONFIGURATIONS FOR RECEIVING WARNINGS. ALL OF THESE ELEMENTS CAN BE MANAGED FROM THE URBAN CONTROLLER. A NEW SYSTEM MADE FOR THE CLIMATE CONTROL CENTRALIZATION IN ONE SOLE COMPUTER AND BEING ABLE TO ACT FROM IT WITH REGARD TO ANYTHING UNFORESEEN.

EXTERNAL DEVICES

+ General on/off of the external devices of one same group. + Individual on/off of each external device. + Programming of the on/off of the external devices through the programmer. + History of the functioning operations (time, action), one-month memory. + Record of the breakdowns during operation (external input signals may be assigned as indicators of status and errors of the external devices), one-month memory. + Record of the actions taken by the users (action, hour, date, user.), one-month memory. + Display of the accumulated operating times of each external device. Possibility of programming a reminder alarm once the operating time limit has been exceeded, very useful for maintenance tasks. + Register of the operating time limit alarms. + Individual and group turning on and off of the interior units through interactive plans.

CZ-**SWBAP/CAP (Software)

Telecommunications line

CZ-01APCAP (DIO ADAPTOR)

FIRE ALARM

SECURITY

EXTERNAL INTERACTIONS

The Urban Controller permits the interaction with external elements of the climate control through the external device board. CZ-01APCAP (DIO), we can distinguish two types of elements: those that can be controlled and programmed through the Urban Controller (external devices) and the elements that can act on the climate control (input signals).
It cannot be used with CZ-01ANA11P, CZ-02ESM11P or CZ-01ESW11P.
URBAN CONTROLLER CLIMATE CONTROL NETWORK IN COMBINATION WITH THE US RANGE
Example of auxiliary accessory management

EXTERNAL ALARMS

SISTEMA DE ADMINISTRACIN
The centralised control addresses can be configured from the remote control.
Up to 16 units can be controlled at once (group automatic addresses configuration).

UM-NET CONTROL

+ Configuration of the climate control reaction (general or individual) in response to the activation/cancellation of the external alarms: only off/on of the equipment. + Record of the alarms. + E-mail warning programming in case of breakdowns. + Visualization of the details of the alarms: activation and capture.
The system can also be used without remote control.

EXTERNAL SIGNALS

+ Configuration of the climate system reaction (general or individual) in response to the activation/cancellation of an external input signal: off/on, operation mode (heat, cold, ventilation.), set temperature and remote control blockage.
CZ-**SWBAP/CAP (Software) Telecommunications line
CZ-01FUNAP (UC Interface)

CZ-20WAP (UD Gateway)

Interface adapter for US series CZ-102AP11P. REMOTE ALARM / FAULT REPORTING (e-mail) CZ-01APCAP (DIO Adaptor) FIRE ALARM SECURITY Serie US TWIN / TRIPLE / QUADRUPLE

PRODUCT RANGE

Product Number CZ-10SWBAP CZ-10SWCAP CZ-11SWBAP CZ-11SWCAP CZ-12SWBAP CZ-12SWCAP CZ-13SWBAP CZ-13SWCAP Max. number of connectable Interior Units 64 units 64 units 128 units 128 units 192 units 192 units 254 units 254 units Possibility of connecting external devices No Yes No Yes No Yes No Yes

UM R410A INDUSTRIAL AIR-CONDITIONING

DEX IN

ING ION GY OLO EM CONDIT YST TION CHN 0A S AIR NTA I TE R41 TRIAL ESEN MULT I PR BA ULT US N M IND UR RBAERA IN U S NEW NEW LITY AGE XIBI DVANT HE T FLE A LE TION IGN BUT LLA EOP STA DESTHING LE HELP P R IN LIAB TO NO YOU E -RE FOR HLY S THER HIG AY L TAGES T TAL ALW MEN INS ADVAN TO RE RON Y NVI EASNY MO HE E MA OF T 0A ARE Y R41 0A OLOG P UM- TAKE C N R41 -6 H E LTI T TECH W I 4-5 MU NI ULT AN U GE RM URB DOOR RANVERTE T ITS OU I UM IN R UN MIN HASE DOO UT NEW LE P G OF O P SIN NGETO 48 H ITS RA R UN NEWM 5 HP O DOO10 HP FR F IN O ENT GE O HP T IREM RAN M 0.8 MS REQU STE H FRO L SY EAC TRO L FOR CON TRO K CON WOR NETOL NET ER TEM UM TR OLL SYS NTR TROL CON RY O ON OVE NC REC ERS RBAASED C U B D EAT ES ANGE R H HEA PC R ORI ESS IC UM X FOS AND C BO L AC ASON HR NCHE NA N BRA PTIO E PA OF O WHOL LIST THE FOR
CUTTING-EDGE TECHNOLOGY TO PROVIDE WELLBEING

PANASONIC URBAN MULTI

WITH EVERY DAY THAT PASSES, PANASONIC MAKES FURTHER PROGRESS IN THE TECHNOLOGICAL DEVELOPMENT OF ITS URBAN MULTI SYSTEM FOR AIR-CONDITIONING IN LARGE AREAS. PROOF OF THIS IS THE NEW VRF INVERTER R410A SYSTEM, CREATED AND DESIGNED TO CATER TO THE MOST DEMANDING NEEDS OF OUR CLIENTS WHILE OFFERING PLEASANT LIVING AND WORKING CONDITIONS WITHOUT FORGETTING THE ENVIRONMENT. MAINTAINING HARMONY WITH OUR ENVIRONMENT IS ONE OF THE MANKIND'S BASIC GOALS, WHICH IS WHY PANASONIC USES THE NEW R410A GAS, TOTALLY HARMLESS FOR THE OZONE LAYER. PANASONIC INVITES YOU INTO THE NEW ERA IN INDUSTRIAL AIR-CONDITIONING
AIR-CONDITIONING 2005 UM R410A INDUSTRIAL
THE NEW ERA IN INDUSTRIAL AIR-CONDITIONING
NEW URBAN MULTI R410A SYSTEM BY PANASONIC PANASONIC HAS DEVELOPED THE NEW VRF INVERTER SYSTEM, A MAJOR IMPROVEMENT ON THE SYSTEM USED IN RECENT YEARS. THERE ARE FIVE PREMISES WHICH REFLECT THE IMPROVEMENT OF OUR SYSTEM: FLEXIBILITY OF DESIGN, PERFORMANCE, LOW NOISE LEVEL, EASE OF INSTALLATION AND HIGH RELIABILITY. FIVE PREMISES THAT OPEN UP THE DOORS TO THE FUTURE OF INDUSTRIAL AIR-CONDITIONING. PANASONIC IS THE REFERENCE POINT.
TWO POSSIBLE PATHS FOR PANASONIC INDUSTRIAL AIR-CONDITIONING
VRF INVERTER HEAT PUMP It can be used to cool or heat from a single system. Control up to 40 units with just one Outdoor model. A broad range of capacity from 5 to 48 hp, in increments of 2 hp.
VRF WITH HEAT RECOVERY For simultaneous cooling and heating. Control up to 40 units with just one Outdoor model. A broad range of capacity levels, from 8 to 48 hp in increments of 2 hp. Heat recovery is obtained by utilising the heat generated by the indoor units in cooling mode in areas that require heat. The HR unit switches between cooling and heating modes in the system.

DESIGN FLEXIBILITY

UP TO 50% REDUCTION IN OUTDOOR UNITS
The VRF inverter system drastically reduces the space required for installation, making it the most space-economising system in the sector. For example, you only need one outdoor unit to obtain 16 hp, unlike the old system, in which two units were necessary.
TOTAL FLEXIBILITY OF AIR-CONDITIONING INSTALLATION
The indoor cooling/heating capacity of the VRF Inverter system can be extended by adding several indoor units to the existing system, when the outdoor unit has excess capacity. Indoor units of up to 130% of the capacity of the Outdoor unit can be added to cover a possible change in floor layout.

CHANGE OF LAYOUT

Reduction

NEW AREA IN THE FLOOR

INSTALLATION SPACE (16 HP)

3,65m2

HP UNIT

1.88m2

OPERATES ALL YEAR ROUND
Thanks to the combination of the system of 3 pipes and the HR box, the simultaneous cooling and heating functions can respond to individual and group air-conditioning needs. The heat recovery series can automatically select heating or cooling mode according to the relationship between the set temperature and the heat load. The rejected heat generated during cooling is recovered for the heating function, which reduces
power consumption by 20%. A good example of the efficiency of this system is to be found in computing rooms in winter, where heat absorbed in cooling is used to reduce heating demand. This cooling energy is used to cool the computing room via the cooling circuit.

BROAD OPERATING RANGE

Works at outdoor temperatures of up to 20C. The heating function will remain stable indoors even when the temperature outside reaches 20C, thus meeting the user's different needs. Moreover, the cooling function operates within a range of 5C to 43C.

PIPES OF UP TO 150 M

The length of the cooling pipe between the indoor unit and the outdoor unit in a system can be extended up to 150 meters, with a height difference of up to 50 meters between the indoor units and the outdoor unit. These generous limits make it possible to place the outside unit on the roof of a 15-floor building. The maximum height difference between indoor units in the same system may be up to 15 meters, thus covering 4 or 5 floors in the same system.
Cooling 43C (TS) Cooling 43C(TS)

Heating 15C (TH)

Cooling Heating 15C(TH)

-5C (TS)

-5C (TS) -5C (TS)
EASE AND FLEXIBILITY OF INSTALLATION

-20C (TH)

URBAN MULTI HEAT PUMP Max. Outdoor unit Indoor Unit Max. Outdoor Unit Actual length 150m
URBAN MULTI HEAT RECOVERY
HIGH EXTERNAL STATIC PRESSURE
Panasonic is now offering 6 mm H20 in static pressure as a standard specification (it used to be 5 mm of H20 with optional accessory) to satisfy on-veranda installation needs.
Max. Level Difference 1st Branch 40 m. Lower outdoor unit

Equivalent Length 175m

Height difference indoors

EXTERNAL STATIC PRESSURE

Prev. Mod.

New Mod.

HIGHLY RELIABLE

THE HIGHEST PERFORMANCE

High performance translates into savings in electricity consumption thanks to greater energy efficiency. This efficiency is due to the fact that since each room is individually controlled, only the rooms that require air-conditioning are heated or cooled. Moreover, thanks to the Inverter technology, the level of air conditioning can be controlled with precision depending on the status of each room. The high COP of our machines is attained using cutting-edge technology, which contributes to smooth and economical operation.

NIGHT-TIME FUNCTION

The Panasonic outdoor units feature 2 operating modes with reduced night-time noise level (-8 dBA). Mode 1: Automatic mode. Selectable in the outdoor PCB. The maximum temperature time is memorised. The silent operating mode will be activated 8 hours after the peak temperature reached during the day. The machine will revert to normal operating mode nine hours later. Mode 2: Personalised Mode. The user can choose silent operating mode activation and deactivation time (An external adapter is required for the outdoor unit, plus a timer).

(*1) NEW

(*2) CURRENT

3,56 2,85 2,63 3,07

% capacity

% load

Operating Sound level dBA
Night-time mode Night-time Max.-8 dBA(10 hp) mode ends

Night-time mode starts

Cooling 48 HP

Heating 48 HP

Entry of external signal to outdoor PCB
The value represents the value obtained with one outdoor unit. * 1 The COP figures are reference values. * 2 COP: comparison based on the use of two units of the current PA-24MX3XPQ model.
This function is available by on-site adjustment. The relationship between outside temperature (load) and time in the graphic is only an example.

THE MOST SILENT

To achieve reduced sound level, Panasonic has redesigned the inside elements of its outdoor units and has afforded the system a night-time function.

ANTICORROSIVE TREATMENT

The special anticorrosive treatment of the heat exchanger offers a 6-fold resistance to saline corrosion and/or acid rain. The lower part has a stainless steel plate to afford the unit additional protection.
CONTROL OF THE COMPRESSOR'S START-UP CYCLE
The Urban Controller uses a system that manages the operation of each compressor so as to prolong their life. This cycle control covers a maximum of nine compressors. The start-up sequence order is controlled in a group of outdoor units.
CROSS SECTION OF THE HEAT EXCHANGER WITH ANTICORROSIVE TREATMENT
Hydrophilic film Aluminium
START-UP CYCLE Anticorrosive acrylic resin
DOUBLE BACKUP IN OUTDOOR UNITS
The conventional VRF or water systems require an expensive and bulky stand-by unit to prevent an emergency shutdown in the event of a system malfunction. On the other hand, with the UM R410A system the fault only affects one part of the system, not it all. If one of the three compressors of an outdoor unit malfunctions, one of the remaining compressors will start to work in emergency mode. Moreover, if there is a fault in an outdoor unit in a system of more than 18 Hp, the other outdoor units will work in emergency mode until the fault is repaired.
WHEN A WHEN AN COMPRESSOR FAILS OUTDOOR UNIT FAILS

Damage

They operate in the event of an emergency

REDUCED REFRIGERANT VOLUME
Reduction in the total amount of refrigerant throughout the circuit. The adoption of the new R410A refrigerant gas, together with the optimisation and reduction of pipe diameters, makes for a major reduction in the volume of the whole circuit.
CLEANER PRODUCTION, GREATER DURABILITY AND RECYCLABLE MATERIALS
As in the whole Panasonic range, the welds used in the electronic plates of the units are lead-free. The bottom plate of the outdoor units is designed to multiply its service life by 6 versus the traditional galvanised bases, whereas the Galbanium steel used to manufacture them is 100% recyclable.
TOTAL AMOUNT OF REFRIGERANT GAS IN THE SYSTEM OVERALL Previous System
Values obtained in a medium-sized installation (16 hp).

Lead-free welds

Reduction of the initial refrigerant load Also the result of research, and with the use of a more effective gas, the new UM R410A series permits a considerable saving in the initial load with regard to previous models of more than 20% compared to the old R22s.

Galbanium Steel

AMOUNT OF INITIAL LOAD
REFRIGERANT RECOVERY FUNCTION
This function opens the valves to facilitate recovery of the refrigerant using a recovery unit.
Comparative values obtained in a medium-sized installation (16 hp).
HIGH TECHNOLOGY FOR THE OUTDOOR UNITS
PANASONIC HAS BROUGHT THE LATEST AND VANGUARD TECHNOLOGY INTO THE URBAN MULTI R410A SYSTEM
THE NEW AERODYNAMIC FANS AND COIL GRIDS, E-PASS HEAT EXCHANGER, DC-INVERTER FAN MOTOR AND RELUCTANCE DC SCROLL COMPRESSOR ARE BUT SOME OF THE CHARACTERISTICS THAT MAKE OUR OUTDOOR UNITS THE MOST RELIABLE ONES ON THE MARKET.

INVERTER TECHNOLOGY 1

The outdoor units of the UM R410A have an advanced control based on the cooling load. In this way, using two compressors, one fixed speed and the other inverter, compressor capacity can be controlled step by step if a low-capacity indoor unit is used. The 5 hp model only uses the inverter compressor.
NEW AERODYNAMIC FAN AND COIL GRID 2
These new elements achieve lower noise in large-volume fans, and offers a compact cover design along with the compressor technology.

OUTDOOR UNIT 5 HP

Aerodynamic coil grid The new profile promotes coiled air discharge, which reduces pressure loss.
Compressor control capacity
210Hz-52Hz 20 Steps Aerodynamic coil ventilator The ventilator blade edges have been doubled to reduce turbulences and reduce pressure loss

Load Small

Inverter Control

OUTDOOR UNIT 8 10, 12 HP

Operation 0 to 100% of compressor No.1
210Hz-52Hz + Compressor No. steps

VENTILATOR DC MOTOR 3

It is included for the first time ever across the whole range of models (from 5 to 48 hp). Improved efficiency from 40%, particularly at low speeds.
Operation 0 to 100% of compressor No. 2

(1600 x 930x765) + (1600 x 1240 x 765) 530 1-3/8 (4) 5/8 (3) 1/1-3/8 (4) 3/4 (4) 1/x comp. hermetic coil 6-100 (2,2+4,5)+ 6-100 (2,2+4,5)+ 6-100
(1600 x 930 x 765) x2+ (1600 x 1240 x 765) 760 1-3/8 (4) 3/4 (4) 1/1-5/8 (4) 3/4 (4) 1/x comp. hermetic coil 4-100 (2,2+4,5)+ (2,7+4,5) 4-100 (2,2+4,5)+ (2,7+4,5)
6 x comp. hermetic coil 5-100 5-100
9 x comp. hermetic coil 3-100 3-100 (2,2+4,5+4,5) x3
(2,2+4,5)+ (2,2+4,5+4,5)+ (2,2+4,5+4,5)+
(2,2+4,5)+ (2,2+4,5+4,5)+
(2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) 2 X propeller fan 0,75x2 0,75x2 0,75x2 0,75x2 0,75x2
(2+4,5+4,5) (3+4,5+4,5) (3+4,5+4,5) (2,2+4,5+4,5) x2
(2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) (2,2+4,5+4,5) 3 X propeller fan 0,75x3 0,75x3 0,75x3 0,75x3 0,75x3 0,75x3

0,75x3

(1,9+1,6)+(1,9+1,6+1,6) 22,25,8
(1,9+1,6+1,6) + (1,9+1,6+1,6) 27,3 28,8 32,1
(1,9+1,6)+(1,9+1,6)+ (1,9+1,6+1,6) 33,6 35,4
(1,9+1,6)+(1,9+1,6+1,6)+ (1,9+1,6+1,6) 36,9 38,4 40,2
(1,9+1,6+1,6)+(1,9+1,6+1,6)+ (1,9+1,6+1,6) 41,7 43,2

ME3 SERIES HEAT RECOVERY

TECHNICAL CHARACTERISTICS
8 HP Model Independent Unit Models 380, 415V 50 Hz 3 / kW Kcal/h
U-8ME3XPQ U-10ME3XPQ U-12ME3XPQ U-14ME3XPQ U-16ME3XPQ PA-18ME3XPQ PA-20ME3XPQ PA-22ME3XPQ PA-24ME3XPQ U-8ME3XPQ U-10ME3XPQ U-10ME3XPQ U-10ME3XPQ U-10ME3XPQ U-10ME3XPQ U-12ME3XPQ U-14ME3XPQ
22,4 20.21.500 6,97 7,03 3,21 3,56
28 25.000 31,5 27.9,50 3,11 3,58
33,5 30.000 37,5 32.300 10,60 11,00 3,16 3,60
40 35.38.700 14,30 13,10 2,80 3,x 1240 x 765
44,5 40.43.000 15,60 14,30 2,85 3,60
50,4 43.400 56,5 48.16,50 3,15 3,61

56 50.54.19,00 3,11 3,61

61,5 53.59.300 19,60 20,50 3,14 3,62
68 58.500 76,5 65.700 23,30 22,60 2,92 3,62
Cooling Heating m /min dB(A) mm kg Gas inches inches inches inches

175 57

Sound pressure level Dimensions (HxWxD)) Weight
1600 x 930 x 3/4 (4) 5/8 (4) 3/8 (3) 245 7/8 (4) 3/4 (4) 3/8 (3) 2 x comp. hermetic coil 295
(1600 x 930 x 765) + (1600 x 930 x 765)
(1600 x 930 x 765)+ (1600 x 1240 x 765) 540 1-1/8 (4) 1-1/8 (4) 5/8 (3) 1/1-3/8 (4) 1-1/8 (4) 5/8 (3) 1/4

340 1-1/8 (4) 7/8 (4) 1/2 (3) -
340 1-1/8 (4) 7/8 (4) 1/2 (3) 3 x comp.
490 1-1/8 (4) 7/8 (4) 5/8 (3) 1/4
490 1-1/8 (4) 7/8 (4) 5/8 (3) 1/x comp. hermetic coil
1-1/8 (4) 3/4 (4) 1/2 (3) -
Piping connection Refrigerant
Discharge gas Liquid Oil balancing Amount/type
hermetic coil 14-100 10-100 10-100 7-100 (1,2+4,5)+
Capacity control Motor Nominal output Amount/type

7-100 (2,7+4,5)+

6-100 (2,7+4,5)+ (2+4,5+4,5)
(1,2+4,5)x1 (2,7+4,5)x1 (4,2+4,5)x1 (2+4,5+4,5)x1 (3+4,5+4,5)x1

(2,7+4,5)

(2,7+4,5) x2

(4,2+4,5)

unit kW 0,75x1 0,75x1
1 X propeller fan 0,75x1 0,75x1 0,75x1 0,75x2
2 X propeller fan 0,75x2 0,75x2 0,75x2

Motor Nominal output

Oil (type and load) DAPHNE FVC68D Refrigerant (load)

1,9+1,6 10,3

1,9+1,6 12,4
1,9+1,6+1,6 1,9+1,6+1,6 13,5 14,6 21,7
(1,9+1,6)+(1,9+1,6) 22,8 23,8 24,9
1. Cooling capacity calculated on an indoor temperature of 27C TS dry thermometer), 19C TH (wet thermometer) and an outdoor temperature of 35C TS / 7.5 m refrigerant gas pipe (horizontal). 2. Heating capacity calculated on an indoor temperature of 20C TS and an outdoor temperature of 7C TS, 6C TH / 7.5 m refrigerant gas tube (horizontal). 3. Flared connection 4. Welded join Safety devices: high pressure switch, protection overload impulsion ventilator, Inverter overload protection, plug fuse. Finishes: Ivory white (5Y70.5/1)
PA-26ME3XPQ PA-28ME3XPQ PA-30ME3XPQ PA-32ME3XPQ PA-34ME3XPQ PA-36ME3XPQ PA-38ME3XPQ PA-40ME3XPQ PA-42ME3XPQ PA-44ME3XPQ PA-46ME3XPQ PA-48ME3XPQ U-10ME3XPQ U-12ME3XPQ U-14ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-10ME3XPQ U-10ME3XPQ U-10ME3XPQ U-10ME3XPQ U-10ME3XPQ U-12ME3XPQ U-10ME3XPQ U-10ME3XPQ U-12ME3XPQ U-14ME3XPQ U-16ME3XPQ U-16ME3XPQ U-14ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ 72,5 62.500 81,5 70.000 24,60 23,80 2,95 3,67.000 87,5 75.300 26,20 25,30 2,98 3,63 84,5 73.81.700 29,90 27,50 2,83 3,63 (1600 x 1240 x 765) + (1600 x 1240 x 765) 585 1-3/8 (4) 1-1/8 (4) 3/4 (4) 1/x comp. hermetic coil 6-100 (2,7+4,5)+ (3+4,5+4,5) 6-100 (4,2+4,5)+ (3+4,5+4,5) 635 1-3/8 (4) 1-1/8 (4) 3/4 (4) 1/1-3/8 (4) 1-1/8 (4) 3/4 (4) 1/1-3/8 (4) 1-1/8 (4) 3/4 (4) 1/x comp. hermetic coil 5-100 5-100 4-100 (2,7+4,5)+ (2,7+4,5) (2+4,5+4,5) 2 X propeller fan 0,75x2 0,75x2 0,75x2 0,75x2 0,75x3 0,75x3 (1,9+1,6)+(1,9+1,6)+ (1,9+1,6+1,6) 36,3 37,4 38,4 39,5 0,75x77.86.000 31,20 28,60 2,85 3,83.92.700 32,30 32,10 2,97 3,87.97.000 33,60 33,30 3,01 3,91.102.000 35,20 34,80 3,01 3,97.109.000 38,90 36,37 2,90 3,64 (1600 x 930 x 765) + (1600 x 1240 x 765) x1-5/8 (4) 1-3/8 (4) 3/4 (4) 1/1-5/8 (4) 1-3/8 (4) 3/4 (4) 1/1-5/8 (4) 1-3/8 (4) 3/4 (4) 1/x comp. hermetic coil 4-100 (2,7+4,5)+ (4,2+4,5) (3+4,5+4,5) 4-100 (2,7+4,5)+ (2+4,5+4,5) (3+4,5+4,5) 4-100 (2,7+4,5)+ (3+4,5+4,5) (3+4,5+4,5) 4-100 (4,2+4,5)+ (3+4,5+4,5) (3+4,5+4,5) 975 1-5/8 (4) 1-3/8 (4) 3/4 (4) 1/4 1.020 1-5/8 (4) 1-3/8 (4) 3/4 (4) 1/4 1.020 1-5/8 (4) 1-3/8 (4) 3/4 (4) 1/101.113.000 40,20 38,10 2,91 3,106.118.000 41,80 39,60 2,94 3,65 U-14ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ U-16ME3XPQ 129 111.125.000 45,50 41,80 2,84 3,65 (1600x1240x765) x 115.129.000 46,90 42,90 2,85 3,65

CONSOLE WITHOUT CASING RM3 SERIES
1-WAY CASSETTE DM3 SERIES
URBAN MULTI R410A DM3 SERIES SLIM DESIGN FOR A FLEXIBLE INSTALLATION
The 1-way cassette achieves an effective discharge of air in corners and uneven ceilings. Easy to install in low ceilings (215 mm high). The automatic mechanism of the deflectors has 3 different configurations. Fitted with drainage pump (500 mm). Front discharge kit (optional). Outside air inlet.

CZ-02RWD12P

Optimal air flow conditions are created, be it with a downwards or frontal air discharge or a combination of both.
Air outlet kit (optional) Panel Air outlet kit (optional) Panel

Output closing panel

Different types of installation

1 HP Power supply

1.3 HP S-32DM3HPS

1.5 HP S-40DM3HPS

2.5 HP S-63DM3HPS 7,1 6.100 8,0 6.780 (3/8) (5/8) 215 x 1.310 x x 1.440 x 9,5
Liquid Flared connection Piping Gas Flared connection connections Drainage Dimensions Unit (HxWxD) Decorative panel Unit Weight Decorative panel Housing Decorative panel colour Heat and sound insulation Temperature control Air filter Safety devices
220, 230V 50 Hz 1 / kW Kcal/h kW Kcal/h W W high/dB(A) low/dB(A) high/m3/h low/m3/h inches inches mm mm kg kg
S-25DM3HPS 2,8 2.400 3,2 2.390 (1/4) (1/2)
3,6 4,5 3.100 3.900 4,0 5,0 3.500 4.540 (1/4) (1/4) (1/2) (1/2) VP25 (external diameter 32, internal diameter 25)
215 x 1.110 x x 1.240 x 8,5 Galvanised steel plate White (10Y9/0,5) Polyethylene foam Thermostat with microprocessor for cooling and heating Washable resin net, anti-mould PCB fuse, fan motor heat fuse, drainage pump heat fuse
URBAN MULTI R410A LM3 SERIES SLIM, LIGHTWEIGHT AND EASY TO INSTALL IN NARROW FALSE CEILINGS
All the models have a compact design which is only 600 mm deep. Designed with a high air flow (up to 3 meters). Automatic deflector mechanism. Low sound levels (28 dB(A)). Drainage pump (600 mm) included in standard model. Long-life filter (1 year). 2 types of optional high-efficiency filters (65% and 95%). The main maintenance work is conducted by removing the decorative panel.

CZ-02RT11P CZ-01RWL12P

The height of the indoor unit (only 305 mm high) allows it to be installed in narrow false ceilings.

Minimum height 305 mm.

0,8 HP Power supply

1,3 HP

1,5 HP

2,5 HP

3,2 HP

5,0 HP

Cooling capacity Heating capacity Cooling Heating Sound pressure
Nominal input power Sound level Sound power level Fan

Air Flow

220, 230V 50 Hz 1 / kW Kcal/h kW Kcal/h W W high/dB(A) low /dB(A) dB(A) high/m3/h low/m3/h inches inches mm mm kg kg
S-20LM3HPQ S-25LM3HPQ S-32LM3HPQ S-40LM3HPQ S-50LM3HPQ S-63LM3HPQ S-80LM3HPQ S-125LM3HPQ 2,8 3,6 4,5 5,6 2.400 3.100 3.900 4.800 3,2 4,0 5,0 6,3 2.800 3.500 4.300 5.35 35.5 35.29 30.5 30.540 (1/4) (1/4) (1/4) (1/4) (1/2) (1/2) (1/2) (1/2) VP25 (external diameter 32, internal diameter 25) 305 x780 xx 995 x x 1.030 x x 1.245 x 8 8.5 Galvanised steel plate White (10Y9/0,5) Polyethylene foam Thermostat with microprocessor for cooling and heating Washable resin net, anti-mould PCB fuse, fan motor heat fuse, drainage pump heat fuse 2,2 1.900 2,5 2.(1/4) (1/2) 7,1 6.100 8,0 6.(1/4) (1/2) 305x1.180x600 53x1.430x9.5 9,0 7.800 10,0 8.1.560 1.260 (3/8) (5/8) 14,0 12.050 16,0 13.1.980 1.500 (3/8) (5/8)

288 x 840 x x 950 x 5

4-WAY CASSETTE UM3 SERIES
(3) Static Pressure Liquid Flared connection Piping Gas Flared connection connections Drainage Dimensions Unit (HxWxD) Decorative panel Unit Weight Decorative panel Housing Decorative panel colour Heat and sound insulation Temperature control Air filter Safety devices
220, 230V 50 Hz 1 / kW Kcal/h kW Kcal/h W W high/dB(A) low/dB(A) dB(A) high/m3/h low/m3/h mmH2O inches inches mm mm kg kg
S-20FM3HPQ S-25FM3HPQ S-32FM3HPQ S-40FM3HPQ S-50FM3HPQ S-63FM3HPQ S-80FM3HPQ S-100FM3HPQ S-125FM3HPQ 2,8 3,6 4,5 5,6 7,1 2.400 3.100 3.900 4.800 6.100 3,2 4,0 5,0 6,3 8,0 2.800 3.500 4.300 5.400 6.1.4/9 4/9 5/9 5/9 5/9 (1/4) (1/4) (1/4) (1/4) (3/8) (1/2) (1/2) (1/2) (1/2) (5/8) VP25 (external diameter 32, internal diameter 25) 300 x 550 x x 700 x 800 300x1.000xx 650 x x 800 x 500 55x1.100x3.5 4.5 Galvanised steel plate White (10Y9/0,5) Polystyrene foam Thermostat with microprocessor for cooling and heating Washable resin net PCB fuse, fan motor heat protector, drainage pump heat fuse 2,2 1.900 2,5 2.4/9 (1/4) (1/2) 9,0 7.800 10,0 8.1.620 1.200 5/9 (3/8) (5/8) 11,2 9.600 12,5 10.1.680 1.230 5/9 (3/8) (5/8) 14,0 12.050 16,0 13.2.280 1.680 5/9 (3/8) (5/8)
300 x 1.400 x x 1.500 x 6.5
1. Cooling capacity calculated on an indoor temperature of 27C TS dry thermometer), 19C TH (wet thermometer) and an outdoor temperature of 35C TS / 7.5 m refrigerant gas pipe (horizontal). 2. Heating capacity calculated on an indoor temperature of 20C TS and an outdoor temperature of 7C TS, 6C TH / 7.5 m refrigerant gas tube (horizontal). 3. The pressure available can be modified in the electrical box connectors. The capacities are net following deduction of the heat generated by the internal fan in the case of cooling (or added up in the case of heating).
URBAN MULTI R410A FM3 SERIES VERY FLEXIBLE FOR SEVERAL APPLICATIONS
High flexibility of installation with the broad range of optional kits. The unit may be installed with a false ceiling space of 350 mm (height of all units 300 mm). Drainage pump is standard (625 mm). High external static pressure. Low sound levels (28 dB(A)). Two types of optional high-performance filters available (65% and 95%). Filter in standard models.
CZ-02RT11P CZ-02RWF12P CZ-03RE11P CZ-02RE11P
Configuration of the lower part aspiration system

Local supply Discharge chamber Air conditioning unit Long-life filter
Configuration of the false ceiling return system (duct type)

Air conditioning unit

42.5 cm or more (Output) (Suction) Canvas of the air Input panel Suction semi-panel (Decorative panel) (Output) High-efficiency filter
(Suction) (54 cm or more)

Output grid

An air suction canvas is used. Depth can be adjusted according to ceiling dimensions.
Configuration of the false ceiling return system
Complete configuration of the high-pressure duct
Air conditioning unit Duct (Local supply)
Local supply Discharge chamber
46 cm or more 42.5 cm or more (Output) (Suction) Flange of the air output Inspection panel Concealed panel for opening the rear suction system

(Output)

(Suction) Access panel Long-life filter
The electronic parts can be maintained from the bottom or the rear
Configuration of the false ceiling return system (high-pressure duct type)
Local supply Discharge chamber 35 cm or more Output grid (Output) (Suction) 45 mm Long-life filter Air conditioning unit
Suction semi-panel (Decorative air input panel)
The air conditioning unit can be installed even although the space between the ceiling and the false ceiling is 350 mm or more.
LOW SILHOUETTE DUCT FM3 SERIES
HOTEL TYPE DUCT NM3 SERIES
URBAN MULTI R410A NM3 SERIES IDEAL COMPACT DESIGN FOR HOTELS
Specific design for hotel air-conditioning (only 230 mm high). Easy to mount in false ceiling. Possibility of lower and rear suction connection to satisfying interior decoration needs. Suction air filter in standard models.
The drainage tray. The tray can be installed to the left or right of the unit, thus facilitating assembly.

1 HP S-25NM3HPQ

Caudal de flow
(3) Static Pressure Liquid Flared connection Piping Gas Flared connection connections Drainage Dimensions (HxWxD) Weight Housing Temperature control Air filter Safety devices
220, 230V 50 Hz 1 / kW Kcal/h kW Kcal/h W W high/dB(A) low/dB(A) dB(A) high/m3/h low/m3/h mmH2O inches inches mm kg

S-20NM3HPQ

2,2 2,8 1.900 2.400 2,5 3,2 2.200 2.2 (1/4) (1/4) (1/2) (1/2) VP25 (external diameter 27,2, internal diameter 21,6) 230 x 505 x Galvanised steel plate Thermostat with microprocessor for cooling and heating Washable resin net

PCB fuse

1. Cooling capacity calculated on an indoor temperature of 27C TS dry thermometer), 19C TH (wet thermometer) and an outdoor temperature of 35C TS / 7.5 m refrigerant gas pipe (horizontal). 2. Heating capacity calculated on an indoor temperature of 20C TS and an outdoor temperature of 7C TS, 6C TH / 7.5 m refrigerant gas tube (horizontal).
URBAN MULTI R410A EM3 SERIES HIGH STATIC PRESSURE THAT PERMITS FLEXIBLE DESIGN OF THE DUCTWORK
More than 150 Pa of external static pressure. The high static pressure permits the installation of a long duct network. Different pressures selectable from the switch cupboard. Broad range of powers in the 8 models, from 1.5 hp to 10 hp. Optional accessories include the drainage kit, the high-efficiency filters (65% and 95%) and the long-life filter (up to 1 year).
Drainage pump included (accessory). The drainage pump is housed inside the unit, thus reducing installation space.
drainage pump included min. 470 mm
min. 590 mm Indoor Unit Drainage pump play 120 Indoor Unit

1.5 HP Power supply

(3) Static Pressure Piping Liquid Flared connection connections Gas Flared connection Dimensions (HxWxD) Weight Unit Housing Heat and sound insulation Temperature control Air filter Safety devices
220, 230V 50 Hz 1 / kW Kcal/h kW Kcal/h W W high/dB(A) low/dB(A) high/m3/h low/m3/h mmH2O inches inches mm kg
S-40EM3HPS S-50EM3HPS S-63EM3HPS S-80EM3HPS S-100EM3HPS S-125EM3HPS S-200EM3HPS S-250EM3HPS 4,5 5,6 7,1 9,0 11,2 14,0 3.900 4.800 6.100 7.800 9.600 12.050 5,0 6,3 8,0 10,0 12,5 16,0 4.300 5.400 6.900 8.600 10.800 14.1.170 1.740 2.960 1.380 1.740 12/16 12/16 13/17 10/16 10/16 15/19 (1/4) (1/4) (3/8) (3/8) (3/8) (3/8) (1/2) (1/2) (5/8) (5/8) (5/8) (5/8) 390 x 720 x x 1.110 x 65 Galvanised steel plate Fibreglass Thermostat with microprocessor for cooling and heating Not a standard accessory. Fit a filter in the suction duct system PCB fuse, fan motor heat protector 22,20.000 25.000 25,0 31,5 21.500 27.000 1.294 1.465 1.294 1.45 3.480 4.320 3.000 3.720 14/19 14/21 (3/8) (3/8) (3/4) (7/8) 470 x 1.380 x 1.100 137
HIGH PRESSURE DUCT EM3 SERIES

INDIVIDUAL CONTROL SYSTEMS
CONVENTIONAL SYSTEMS TREAT AIR-CONDITIONING AS A WHOLE, WHILE THE VRF SYSTEM TREATS AIR-CONDITIONING FOR EACH SEPARATE ROOM. THEREFORE THIS SYSTEM IS IDEAL FOR A BUILDING WHERE THERE IS OCCUPATIONAL VARIABILITY. MOREOVER, IT IS POSSIBLE TO HAVE A PRECISE CONTROL OVER EACH ONE OF THE ROOMS TO EXACT CONDITIONS. INDIVIDUAL CONTROL MAKES THIS SYSTEM MORE ECONOMICAL AND EFFICIENT. WIRED REMOTE CONTROLLER CZ-02RT11P
Remote control with LCD and auto-diagnosis Constant monitoring of the system for fault detection in a total of 80 components Immediate display of fault site and type Reduction of maintenance time and cost Operating buttons ON / OFF Programmer: 5 actions per day (Total of 35). Programme temperature or temperature limits. Memory of last programming. Deprogram actions at any time Temperature adjustment Limitation of the temperature range Adjusting air direction Selection of operating mode Fan speed control Comfort temperature maintenance function Different levels of button deactivation Monitor Operating mode Automatic switch between cooling and heating Centralised control indicator Group control indicator Temperature selected Air direction Clock Day of the week indicator Inspection/operating test Fan speed Outside air filter Defrost/warm start indicator Faults
SIMPLE WIRING CONTROL CZ-02RE11P
Simple, compact and easy-to-use unit Suitable for hotel rooms Operating buttons ON / OFF Selection of operating mode Fan speed control Temperature adjustment Monitor Automatic switch between cooling and heating Temperature selected Operating mode Centralised control indicator Fan speed Defrost/warm start indicator Fault adjustment Selection of operating mode Fan speed control Restart filter Inspection/operating test
REMOTE CONTROL WITH INFRARED CZ-02RWD12P / CZ-02RWF12P CZ-01RWL12P / CZ-01RWU12P CZ-01RWK22P / CZ-01RWT12P CZ-10RWY12P
Operating buttons ON / OFF Timer on/off Time programmed Temperature adjustment Air direction (only for models S-TM3JPR, S-UM3HPQ, S-LM3HPQ and S-KM31HPR Operating mode Fan speed control Restart filter Inspection/operating test Monitor Operating mode Battery replacement Temperature selected Air direction (only in models CS-TMJPL, CS-UMHPP, CS-LMHPP and CS-KM1HPK) Time programmed Inspection/operating test Fan speed
SIMPLE WIRING CONTROL CZ-03RE11P FOR HOTELS
Compact, easy-to-use unit Suitable for hotel rooms Operating buttons ON / OFF Fan speed control Temperature adjustment Monitor Temperature selected Operating mode Centralised control indicator Fan speed Defrost/warm start indicator Faults
CENTRALISED CONTROL SYSTEMS
THESE CONTROLS MAY BE INDEPENDENT OR COMBINED; IN THIS LATTER MODALITY, 1 GROUP IS EQUIVALENT TO SEVERAL INDOOR UNITS (UP TO 16) COMBINED, AND 1 AREA, TO SEVERAL MIXED GROUPS. CENTRALISED REMOTE CONTROL IS THE IDEAL SOLUTION IN THE CASE OF LEASED COMMERCIAL BUILDINGS WHICH MAY HAVE DIFFERENT OCCUPANCY RATES, SINCE THE INDOOR UNITS CAN BE DISTRIBUTED IN GROUPS BY LESSEE (DISTRIBUTION BY AREAS). THE LESSEE CAN CONFIGURE THE PROGRAMME AND THE OPERATING CONDITIONS USING THE TIMER AND EASILY RESTART THE CONTROL ACCORDING TO THE DIFFERENT NEEDS.

Schedule Timer CZ-01ESW11P
48 hour back-up memory Use of 1 unit maximum

CONTROLLERS AND ADAPTERS

CZ-01RD11P Cool/Heat controller from outdoor unit It is used to switch between cold, heat and ventilation for each outdoor unit at the click of a button. It allows several outdoor units to switch operating mode at once with just one remote control (an external control adapter is needed).
Select air-conditioning/ventilation Cold/heat selection

CZ-103AP11P

Interface adapter for other air-conditioners
Other air conditioning unit UM Outside Unit
On/off selection Operating Information Information in case of error
KRP1B61/B2/B3 (*1) Information on compressor operation Operating Information on fan operation Interconnector OA
Printed circuit board (PCI) for optional accessories B61 (LM3,FM3,EM3,NM,DM3,PM3,RM3) B2 (UM3), B3 (KM3,TM3) KRP1B61/B2/B3 B57 (YM3)
Equipment external to the system

DTA109A51

UM-net gateway for a maximum of 1024 indoor units
RANGE OF ADAPTERS OF INTERFACE TO BMS
DCS302A52 On/off selection On/off status Information in case of error Interface adapter to BMS of the CZ-ESM CONTROLLER (unified operation of the whole system)

DCS302A52 CS-ESM

KRP2A51/52(*1) On/off selection Select temperature adjustments On/off status Information in case of error
Interface adapter to BMS for groups (maximum 64 groups) A51 (LM3, FM3, EM3, DM3, NM3, KM3, PM3, RM3) A52 (UM3, TM3, YM3)
*Does not work with CZ-ESM/ANA/ESW

Controls up to 16 groups

KRP4A51/A52/A53(*1) On/off selection Temperature adjustment selection On/off status Information in case of error
Interface adaptor for BMS to individual or unified group A51 (LM3, FM3, EM3, DM3, NM3, KM3, PM3, RM3) A52 (TM3) A53 (UM3, YM3)
DTA104A61/A51/A52(*1) Selection of operating mode Selection of night-time operation Demand control Control de demanda
Interface adapter to BMS for outdoor unit A61 (EM3, KM3, DM3, PM3, RM3), A51 (LM3, NM3) A52 (YM3,UM3,FM3,TM3)
* must be installed next to the indoor unit
Outdoor unit (possible to control up to 10 individual units Demand signal / silent running
Cooling/heating selector: for choosing cooling and heating mode for a maximum number of 10 outdoor units simultaneously. Silent operation control: for activating silent operation of the outdoor unit by hitting the switch. Demand signal control: this is used to choose between three adjustment positions: 70% operation, 40% operation and automatic thermostat switch-off by hitting the switch. (*1) Adapter installation box required for the LM3,UM3,TM3, NM3 and YM3 series. Panasonic has a new range of accessories, see latest catalogue.

High-efficiency filter 65%

OUTDOOR UNITS SERIE ME3

Headers CZ-P29HK32Q CZ-P64HK32Q CZ-P75HK32Q CZ-P20BK32Q CZ-P29BK32Q CZ-P64BK32Q CZ-P75BK32Q CZ-32PJ3PQ CZ-48PJ3PQ KWC26B280 KWC26B450
High-efficiency filter 90%

Filter chamber

18~32HP 34~48HP Modules U-8,10ME3 Modules U-12,14,16ME3

Long-life filter spare

NOTE: The filter chamber is indispensable if a high-efficiency filter is installed

HR BOX

HR Box CZ-100HR1HS CZ-160HR1HS CZ-250HR1HS CZ-01RD11P KJB111A
Decorative panel Panel separator Long-life filter spare Air outlet grille 25~25~25~25~25~25~CZ-02KPD11P CZ-03KPD11P KPBJ52F56W KPBJ52F80W KAFJ521F56 KAFJ521F80 K-HV7AW K-HV9AW CZ-02KFD11P CZ-03KFD11P KFDJ52F56 KFDJ52F80
Cool/heat selector Fixing box
Decorative panel Panel separator Output air insulator Outside air inlet kit all all all With T shape and fan With T shape and no fan Without T shape and without fan rect installation Filter High efficiency 65% CZ-06KPU11P KDBJ55K160W KDBHJ55K160 KDDP55D160F KDDP55D160K KDDP55D160 KDDJ55X160 KAFJ552K80 KAFJ552K160 KAFJ553K80 KAFJ553K160 KDDFP55D160 KAFJ551K160 KDDJ55B160 KDDJ55B160K KAFP556D80 KAFP556D160 KAFP557D80 KAFP557D160 KAFJ55K160H KDJ55B80 KDJ55B160 KKSJ55K160
Air output concealed panel Flexible duct (with shutter)
Drainage pump High-efficiency filter 65% 40~125 200~250 40~63 80~125 200/250 40~63 80~125 200/250 40~63 80~125 200/250 40~63 80~125 200/250 KDU30L125VE KDU30L250VE KAFJ302L71 KAFJ302L140 KAFJ372L280 KAFJ303L71 KAFJ303L140 KAFJ373L280 KDDJ30L71 KDDJ30L140 KDJ3705L280 KAFJ301L71 KAFJ301L140 KAFJ371L280
20~63 80~125 High efficiency 90% 20~63 80~125 Filter chamber for the above all Long-life filter spare all Branch Duct standard chamber (1) all Chamber standard chamber (2) High calorimetric efficiency filter unit calorimetric 35~63 method 65% 100~125 calorimetric 35~63 method 90% 100~125 Ultra-long lasting filter spare all Branching chamber 35~63 100~125 Chamber connection kit all

Long-life filter

LOW SILHOUETTE DUCT FM3 SERIES3
20~32 40~80~125 Access panel 20~32 40~80~125 Auxiliary electric resistance 0,75 KW 20~32 (240/220V) 1,2 KW 40~50 1,4 KW 63 2,1 KW 80~125 2,8 KW 125 High-efficiency filter 65% 20~32 40~80~125 High-efficiency filter 90% 20~32 40~80~125 Filter chamber for lower suction 20~32 40~80~125 Filter chamber for rear suction 20~32 40~80~125 Air suction canvas 20~32 40-80~125 Concealed panel /air outlet 20~32 40~80~125 Output adapter panel for round pipe 20~32 40~80~125 Decorative panel CZ-01HPF11P CZ-02HPF11P CZ-03HPF11P CZ-06HPF11P KTBJ25K36W KTBJ25K56W KTBJ25K80W KTBJ25K160W KEA25K32VE KEA25K50VE KEA25K63VE KEA25K100VE KEA25K125VE KAFJ252L36 KAFJ252L56 KAFJ252L80 KAFJ252L160 KAFJ253L36 KAFJ253L56 KAFJ253L80 KAFJ253L160 KAJ25L36D KAJ25L56D KAJ25L80D KAJ25L160D KAJ25L36B KAJ25L56B KAJ25L80B KAJ25L160B KSA-25K36 KSA-25K56 KSA-25K80 KSA-25K160 KBBJ25K36 KBBJ25K56 KBBJ25K80 KBBJ25K160 KDAJ25K36 KDAJ25K56 KDAJ25K71 KDAJ25K140