2009 DMP-BD60 Blu-ray Disc Player
PHL Reference Chroma Processor Plus
Faithful and sharp color reproduction
D memory card and USB slot S - Enjoy precious memories in HD High precision 4:4:4 24p cinema mode

VIERA CAST

Enjoy great web entertainment on your HDTV
.1ch lossless audio decode and 7 bit-stream output VIERA Link NERGY STAR rated; consumes 10% less E power than DMP-BD35

BD Live and BonusView

Connect directly to the Internet to access bonus features, games and movie studio extras
2009 DMP-BD60 Blu-ray Disc Player Specifications

DMP-BD60

BD-ROM BD-RE / BD-RE DL BD-R/ BD-R DL DVD-RAM BD-Live JPEG (HD) BD-MV(BD-R version2) DVD-VR JPEG (HD) AVCHD DVD Video DVD-R*2/DVD-RW*2/DVD-R DL*2 FORMAT DVD-VR AVCHD DivX*3 +R*2/ +R DL*2/ +RW*2 DVD-ROM CD CD-R/-RW*4 DVD-VR AVCHD DVD Video CD-DA MP3*5 JPEG (HD) DivX*3 SD Memory Card AVCHD, MPEG2 JPEG (HD) MP3*5 USB PHL Reference Chroma Processor Plus High Precision 4:4:4 P4HD (Pixel Precision Progressive Processing for HD) Precise Pixel Generation 16-Level Motion Detection with Pixel-Based Motion Adaptive Diagonal Processing 3:2 Pull-Down Progressive Processing i/p Conversion for 1080p*6 Playback VIDEO Up-Conversion to 1080p*6 Playback Video D/A Converter Progressive Scan Digital Noise Reduction 1080/24p Playback Deep Color x.v.Color*8 Picture Mode Picture Adjustment VHS Playback Format Audio D/A Converter Dolby Digital Plus Dolby TrueHD DTS-HD*11 AUDIO 96kHz Surround Re-Master High Clarity Sound Advanced Surround (V.S.S.) Night Surround Mode Dialog Enhancer Dynamic Range Compression COMPONENT VIERA Link (HDAVI Control 4)*14 VIERA CAST*15 Super High Speed Scan Audio/JPEG Navigation Menu SD Memory Card Slot Ethernet for Network INPUT/OUTPUT HDMI (Output) Support Features Component Video Out (Y, PB, PR) Video Out Analog Audio Out Digital Audio Out Audio S/N SPECIFICATIONS Dynamic Range Power Source Power Consumption (Approx.) Weight (lb.) (Approx.) Dimensions (W x H x D) (inch) (including the projecting part) (Approx.)
* BD-ROM Profile 2. (BD-Live feature includes BONUSVIEW functions.) To enjoy additional contents (such as 1. BD-Live) on certain Blu-ray Disc titles, you will need to insert an SD card (1GB or more of free space/Sold separately). Requires broadband Internet service for a fee. * iscs recorded and finalized on DVD video recorders/cameras. 2. D *3. Plays DivX video. DivX is a registered trademark of DivX, Inc., and is used under license. *. Playability may vary depending on the contents, discs and quality of the recording. 4 *. For contents recorded on CD-R/RW for your personal use only. 5 *. HDMI connection required. 6 l l l

l l l l l l l l l l

BD-MV(BD-RE version3)

l l l l l l

l l l l

JPEG (HD) DivX*3

l l l l l l l l l

148.5MHz/12bit

(3D-NR/ Integrated NR)
192kHz/24bit Decode and Bitstream Output*6 Decode and Bitstream Output*6 Decode and Bitstream Output*6

(for All Formats)*13

(For BD-Live*1, VIERA CAST and Firmware Update)
Deep Color, x.v.Color*8,High Bit Rate Audio
2ch (1 Optical) 115dB 100dB AC 120V, 60Hz 22W 5.7 16-15/16" x 1-15/16" x 9-13/16"
*7. For BD-ROM /BD-R and DVD-Video via HDMI. *8. his function is effective only when reproducing AVCHD data recorded with x.v.Color technology. The function cannot be T used with BD-ROM or DVD-ROM discs. HDMI connection is required. x.v.Color is a registered trademark. *9. ormal/ Soft/ Fine/ Cinema/ User N *10. ontrast, Brightness, Sharpness, Color, Gamma Correction C *11. TS-HD High Resolution Audio, DTS-HD Master Audio Essential. D *12. D sampling is done at 88.2 kHz. DivX data can be re-mastered both on DVD and CD whereas MP3 data only CD. C *13. D sampling is done at 88.2 kHz. MP3 data can be re-mastered only on CD. C *14. VIERA Link is a new name for EZ Sync. Not all VIERA Link features are usable with earlier VIERA Link and EZ Sync compatible products. * 5. equires broadband Internet service for a fee. 1 R * BD-Live and BONUSVIEW are trademarks of Blu-ray Disc Association. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories

DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Table of Contents
Table of Contents.... 1 Firmware History... 2 1.1 Applicable Models.... 2 1.2 Version.... 2 1.3 Release Date.... 2 1.4 Purpose.... 2 Check Firmware Version.... 3 Download Firmware... 4 Burn Firmware.... 5 4.1 Windows OS CD Writing Program... 5 4.2 Other OS CD Writing Program... 6 4.3 3rd Party CD Burning Software... 7 4.4 Dragging & Dropping... 7 Install Firmware.... 8
If the Blu-Ray Disc Player is correctly connected to a home network with broadband internet access, firmware updates can be installed manually or automatically via the player without the user having to download the firmware to a computer and burn the firmware to a CD-R disc. Please see page 16 of the Operating Instructions for more information.
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 1 of 9

Firmware History

Applicable Models
DMP-BD60, DMP-BD601, DMP-BD605 Includes models with the suffix K 1.2 1.7 1.3 Release Date Version
1 June 2009 1.4 Purpose Fixed Audio Drop problem with the movie Twilight ---------------------------------------------------------Improves the display of the Lionel Richie Live top menu. Enables Auto Still setting in select BD discs. (Enables Still Off" setting.)
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 2 of 9

Check Firmware Version

CAUTION: If the player has the most recent firmware, there is no need to perform a firmware update. 1) Press the [POWER] button on the player to turn it ON. 2) Press the [SETUP] button on the remote control to display the players MENU. 3) Using the [UP ARROW] or [DOWN ARROW] on the remote control, highlight DISPLAY and then press [OK]. 4) Press and hold the [STATUS] button on the remote control to display the current firmware version in the lower right corner of the DISPLAY screen.
Number displayed will be dependent upon the firmware version installed.
CAUTION: Compare the current firmware version displayed to the firmware version received or downloaded. If they are the same, or the firmware version displayed in the player is higher, there is no need to install the firmware. Reasons why the player may have a more recent firmware version: If the player was manufactured after the firmware was released, the firmware update may have already been installed. If the player was serviced by an authorized Panasonic service center, a service technician may have already installed the latest firmware update.
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 3 of 9

Download Firmware

1) Left click on the DOWNLOAD icon for the DMP-BD60 Firmware. - DMP-BD60 Blu-Ray Disc Player Firmware Update 2) Left click on the I agree to the terms of use checkbox. 3) Left click on DOWNLOAD. 4) Left click on SAVE.
The file name displayed should be PANA_DVD.FRM.
5) Left click on DESKTOP, and then left click on SAVE.
NOTE: The PANA_DVD.FRM firmware file will be saved to the DESKTOP.
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 4 of 9

Burn Firmware

NOTES: Use one of the below methods to burn the firmware file to a CD-R disc. Use the ISO-9660 file system without using Joliet. 4.1 Windows OS CD Writing Program
1) Insert a blank CD-R disc into a CD Burner Drive installed in or attached to the computer. 2) If the below (or similar) screen appears (Windows XP), left click on CANCEL.
3) Right click on the PANA_DVD.FRM file on the DESKTOP, mouse over SEND TO, and then left click on the CD BURNER DRIVE.
NOTE: If the below screen appears, left click on YES.

NOTE: The below screen may appear momentarily.
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 5 of 9
4) Left click on the YOU HAVE FILES WAITING TO BE WRITTEN TO THE CD icon in the SYSTEM TRAY.
5) Left click on WRITE THESE FILES TO CD.
6) Type a name for the CD, check the CLOSE THE WIZARD AFTER THE FILES HAVE BEEN WRITTEN check box, and then left click on NEXT.
NOTE: The below screen will appear during the burning process.
7) After the PANA_DVD.FRM has been burned to the CD, the disc should automatically eject from the CD Burner Drive. If it doesnt, manually eject the disc. 4.2 Other OS CD Writing Program
Refer to the computers or operating systems owners manual, or HELP files for instructions on how to copy the PANA_DVD.FRM to a CD-R disc using the ISO-9660 format without using Joliet.
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 6 of 9
3rd Party CD Burning Software
Refer to the software applications owners manual or HELP files for instructions on how to copy the PANA_DVD.FRM to a CD-R disc using the ISO-9660 format without using Joliet. 4.4 Dragging & Dropping
If an icon for the CD Burner Drive has been placed on the DESKTOP, left click on the firmware file, hold the left mouse button down, drag the file to the CD Burner Drive icon and release the left mouse button. Refer to the software applications owners manual or HELP files for instructions on how to copy the PANA_DVD.FRM to a CD-R disc using the ISO-9660 format without using Joliet.
Follow the procedure beginning with STEP 4) under SECTION 4.1 on PAGE 6 of 8.
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 7 of 9

Install Firmware

CAUTIONS: The firmware update may take up to 10 minutes to install. Please be patient during the firmware installation. Do NOT press any other buttons during the firmware update. Do NOT power the player OFF during the firmware update.
1) Press the [POWER] button on the Blu-Ray Disc Player to turn it ON, if it is not already powered ON. 2) Press the [OPEN/CLOSE] button to open the disc tray. 3) Load the CD with the firmware update into the disc tray. 4) Press the [OPEN/CLOSE] button to close the disc tray. NOTES: After the disc tray closes, the player will first display BYE on the front panel display, automatically turn itself OFF, restart again within a few seconds, and begin installing the firmware update from the CD. If the player does not restart automatically following powering OFF, press the [POWER] button on the main unit to turn it ON. During the installation process youll see various messages flash on the front panel display. If the firmware version in the unit is the same as or higher than the firmware CD, UNSUPPORT will scroll across the front panel display. In this case, an update is unnecessary. Please remove the disc.

5) When the firmware installation is complete, FINISH will be displayed on the front panel and the disc tray will open automatically. (If it doesnt, press the [OPEN/CLOSE] button.)
6) Remove the firmware update CD, but do not close the disc tray. DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 8 of 9
7) Press the [POWER] button to turn the power OFF. close and the unit will power OFF.
The disc tray will automatically
DMP-BD60 Blu-Ray Disc Player Firmware Installation Instructions Page 9 of 9