Reviews & Opinions
Independent and trusted. Read before buy Panasonic DP-1810!

Panasonic DP-1810

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic DP-1810, size: 8.2 MB
Related manuals
Panasonic DP-1810P
Panasonic DP-1810F
Panasonic DP1810F-FAX

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic DP-1810Panasonic DP1810/2010 Drum DQHO45B
(45K) is used in the DP-1810P - DP-1810F - DP-1810P - DP-1810F"

Details
Brand: Panasonic
Part Number: DQHO45B


Here you can find all about Panasonic DP-1810, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your Panasonic DP-1810 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc1

I The maximum power consumption is 1.2 kW.
A properly wired (grounded), dedicated, 15 A, 120 VAC outlet is required. Do not use an extension cord. The power cord on this equipment must be used to disconnect the main power. Please ensure that the socket outlet is installed near the equipment and is easily accessible.
FCC WARNING For U.S.A. FCC WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. The user could lose the authority to operate this equipment if any unauthorized changes or modifications are made to this equipment.

Control Panel

(For DP-2010E only)

No # $ % & ( )

Contents 2 in 1 Key C From two 1-sided originals, side by side, to 1-sided copies. 2 Page Copy Key C Copying two facing pages on a ledger size original on two separate letter size sheets. Sort Key C When using Electric Sorting Mode. Optional memory is required. MARGIN Key C Shifts the image to the right or left. EDGE Key BOOK Key C Creates a blank edge. C Eliminates dark inner binding shadows.
Refer to Page 16 Page 17 Page 23 Page 18 Page 18 Page 18
Photo; Text/Photo; Text Keys C Select the type of original(s) for image density adjustment. PHOTO : Originals are mainly composed of photo. TEXT/PHOTO: Combined originals with text and photo. TEXT : Originals are mainly composed of text. Exposure Keys (DARKER, LIGHTER) SET Key C Set the present selection.

Page 12

+. / 0 1

Page 12 Pages Page 24

FUNCTION Key C Use when changing the paper size, initial values for functions (default values) and key operator settings. CLEAR Key C Clears the copy count in the display. ENERGY-SAVER Key C Can save power while the copier is not in use. RESET Key C Resets all features to the initial power-on state.
C The Control Panel displayed above shows only copier functions. Please refer to the appropriate operating instructions for other control panel functions or in the Panasonic Document Management System CD-ROM for the Printer control panel functions. C The illustration above shows the DP-2010E control panel.

LCD Display

Warning Indications J Add Paper ? Add Toner I Misfeed 2 Call Service
For DP-1810E No : STOP Key START Key Contents C Stops the copy run. C Used to start an operation. Refer to Pages 22, 24
INTERRUPT Key, MEMORY IN Key, M1/M2 Keys C Interrupt Key interrupts other copy or print jobs while making copies. C Memory In Key registers two copy jobs for recall at a later time. C M1/M2 Keys are used to store a Job in Memory or to recall a Job stores in Memory. Cursor Keys C Select copy ratio and function modes using (G or F). PAPER TRAY Key C Used to select the paper tray manually.
COPY SIZE Key C Used to select Reduction/Enlargement only. For additional details, see page 13. ORIGINAL SIZE Key C Used to select the original size manually. For additional details, see page 13. PRINT Key C When selecting the Printer ON/OFF Line. 2-Sided/1-Sided Copy Key C Used to select 1 \ 2, 2 \ 2 and 2 \ 1, Book \ 2 copying
C The Control Panel displayed above shows only copier functions. Please refer to the appropriate operating instructions for other control panel functions or in the Panasonic Document Management System CD-ROM for the Printer control panel functions.

Basic Copy

Full Size Copying
I Copying the Same Size Originals (1:1)
Copy size is automatically selected.
ORIGINAL SIZE Key CLEAR Key
Place the Original LCD Display (Sample)
Number of Copies* Press START** Up to 999

READY TO COPY COPIES:001

Select the Original Size on units without the ADF/i-ADF Option.
I Manually Selecting Exposure Control or Original Type
# Select the Original Type
PHOTO : Originals are mainly composed of photo. TEXT/PHOTO: Combined originals with text and photo. TEXT : Originals are mainly composed of text.
$ Select Exposure Control
Press the DARKER/LIGHTER keys to adjust the exposure.
Use Clear key when canceling the copy count. While the copier is warming up, you may position your original on the copier, enter
your copy job selections and press the Start key. The COPY JOB RESERVED indicator displays until the warm up cycle is completed and the copy job is automatically started.
Basic Copy Reduction or Enlargement Copying
I Copying with Preset Ratios

Select the ORIGINAL SIZE

Select the COPY SIZE

Number of Copies

Example: Reduction Original size

Copy size

LDR ->LTRB [LTRB ] ZOOM: 65% COPIES:001
The correct ratio is automatically selected. Reduction and enlargement ratios (%)
Original Size Ledger Ledger Legal Letter Invoice Copy Size Legal Letter Invoice 65 100
C When changing the paper tray, press the Paper Tray key.
C If the desired copy size is different from the paper size loaded in the paper tray, use the sheet bypass. (See page 15) C Press the RESET key to cancel all job settings.

Basic Copy Zoom Copying

I Zoom
Copies with variable zoom ratios from 50 % to 200 % in 1 % increments. RESET
Select ORIGINAL SIZE (without using ADF/i-ADF)
Press Cursor (G or F) keys to select Zoom Ratio
Number of Copies Press START
LTR ->LTRB [LTRB ] ZOOM:125% COPIES:001

(Example: 125 % Zoom)

ATTENTION
C When changing the paper size after setting the zoom ratio, please use the paper tray key. C Press the RESET key to cancel all job settings.
Basic Copy Using the Sheet Bypass
I Copying on Special Paper, etc.

Sheet Bypass

Place the original. Open the sheet bypass.

Side Guides

# Place the sheets of paper into the tray. (approximately up to 50 Letter size sheets/20 lb)
Do not fill above. Insert the paper until it stops.
$ Adjust the side guides.
Incorrect adjustment may cause the paper to wrinkle, misfeed or skew.

Press START.

C Do not feed curled paper through the sheet bypass to avoid misfeed.
C Adjust the side guides properly to avoid skewing, wrinkling or misfeeding.
Pull out the sheet bypass tray until it stops. (For Ledger size only)

Creative Features

2 in 1 Copy

I 2 in 1 Copy

From two 1-Sided originals, side by side, to 1-Sided pages.

1 \ 2 (Layout)*

2 \ 1 (Layout)* Landscape (Orientation)*

2 \ 1 (Layout)*

Portrait (Orientation)*

I Procedure

ADF/i-ADF

Face-Up

Place the Originals

Press 2 in 1 key

COPY SIZE (Reduction/ Enlargement Only)
C The ADF/i-ADF is required for 2 in 1 copy. CPress the RESET key to cancel all job settings. CNumbers in parenthesis ( ) represent that, an additional step is required to activate the feature. The Orientation and Layout can be set in the Copier Settings function mode. (See page 27)
Creative Features 2 PAGE COPY

I 2 PAGE Copy

Copying two facing pages on a ledger size original on two separate Letter size sheets.
ORIGINAL SIZE (Letter or Ledger size Only)

Select the SORT Mode

Number of Press Copies START
ANOTHER ORIGINAL? 1:YES 2:NO Press 1 key. Repeat steps 6 and 7 until all originals are scanned and stored into the copiers memory.

Place next Original

ANOTHER ORIGINAL? 1:YES 2:NO Press 2 key.
CWhen the memory becomes full during original scanning, the message OUT OF MEMORY CONTINUE? 1: YES 2: NO will be displayed in the message display. If this occurs, follow the instructions in the message display. For additional memory consult your authorized servicing dealer. CTo reset all job settings, press the RESET key.

Other Features

Energy Saver/Interrupt Mode
INTERRUPT (F1) Key ENERGY-SAVER Key

ENERGY SAVER

I These modes can save power while the copier is not

in use.

Energy Saver Mode
# To enter this mode Press the ENERGY-SAVER key or the copier will automatically enter the ENERGY-SAVER Mode after 15 minutes* from the last copy. The indicator will flash. $ To cancel this mode and make copies Press the ENERGY-SAVER key again.

Sleep Mode

# Automatically enters the Sleep Mode after 30 minutes from the last copy. The copier power will drop and the indicator will light. $ To make copies, press the ENERGY-SAVER key.

Interrupt Mode INTERRUPT

C This mode can interrupt other copy jobs while making copies. # Press the INTERRUPT (F1) key, the indicator will light. $ Make another copy job using the platen glass. % Press the INTERRUPT (F1) key again to continue the original job. Note: The ADF can not be used with interrupt. (Use only the Platen)
Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by the key operator. (See page 31) Modes Normal Operation Energy Saver Mode Sleep Mode Power Consumption Approximately 92 Wh Approximately 40 Wh Approximately 1.5 Wh Warm Up Time N/A 30 sec. recovery 30 sec. recovery
Other Features Skyshot Mode
I Skyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF/i-ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for copying small-sized originals like bank checks or documents with unusual shapes (round, oval, etc.). These documents can be reproduced without generating any unnecessary black areas simply by making a copy with the cover open. Two types of Skyshot modes can be selected; Digital Skyshot Mode : The scanning area (size) is not pre-determined. Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance. (See page 30)

I Digital Skyshot Mode

Place the Original on the platen (Opening the Platen Cover/ADF)

Press START Key

Note:The default setting of Digital Skyshot Mode is NORMAL. In this setting, the unit scans once. If there are black areas around the borders in the copies, set the Digital Skyshot Mode to QUALITY to soften the dark borders. In this setting, the unit scans twice. # Press the FUNCTION key.
FUNCTION MODE (1-2) ENTER NO. OR 2:COPIER SETTINGS PRESS SET TO SELECT COPIER PARAM. (00-14) ENTER NO. OR 06 DIGITAL SKYSHOT 2:NORMAL
$ Press the 2 key to select COPIER SETTINGS.

% Press the SET key.

& Press 6 and SET key to select DIGITAL SKYSHOT. ( Press 1-3 key to select the Digital Skyshot Mode. 1: OFF NONE 2: NORMAL Default setting (usually select this mode). 3: QUALITY For better definition, select the Quality mode. ) Press the SET key. * Press the RESET key.
C An incorrect exposure may occur when there is a black line at the edge of the original or an image which the copier interprets as a black pattern in the Skyshot mode. C An incorrect position detection of the original may occur when a strong light shines onto the glass during Skyshot mode.

I Manual Skyshot Mode

When using this function, the custom size should be registered into memory (M1, M2) in advance. (See page 32) Platen Upperleft corner
Select the Custom Size (M1 or M2)
# Press the FUNCTION key.
FUNCTION MODE (1-2) ENTER NO. OR 2:COPIER SETTINGS PRESS SET TO SELECT
COPIER PARAM. (00-14) ENTER NO. OR
& Press 7 and SET key to select MANUAL SKYSHOT.
07 MANUAL SKYSHOT 2:M1 ON
( Press 2 or 3 key to select the Custom Size. 1: OFF NONE 2: M1 ON M1 size is ON* 3: M2 ON M2 size is ON* 4: M1, M2 ON Both sizes are ON ) Press the SET key. * Press the RESET key.
The default size for M1 is: 70(X) 160(Y) mm, and M2 is: 95(X) 220(Y) mm C When changing the M1 or M2 size, consult with the key operator. C When using the Manual Skyshot mode, M1 and M2 are turned ON and other job memory cannot be used. C Press the RESET key to cancel all job settings.

Combined Function Table

Next Selections

Job Memory Retrieval

Book -> 2 2\1

Margin

Zoom Copy 2 in 1 Copy

2-ORIGINAL H COPY

A O O O O O O O O O O O O
O O O O O O O A A O A A A O A A A A A A O O A A A A A O O A A A A A O O A A A A A O O A A A A A O O O O O O O A O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O A A A A O O O
O O O O O O O O A O O O O
O O O O O O O O O A O O O
O O O O O O O O O O A A A

First Selections

A A A A A A A A A A A A A
2 Page Copy 1\2 2\2 Book \ 2 2\1 Book

Job Memory Storing

Other Functions

Manual Skyshot

Remarks

2 Page Copy

Zoom Copy

Sort-Rotate

Non-Sort
O O O O O O O O O O O O O

Edge Margin Non-Sort

Sort Sort-Rotate

Interrupt

O : Possible Combined Functions. : Unavailable Combined Functions. A : Next Selection is Carried Out. : Indicates that SORT mode cannot be used. Non-sort operation is carried out.

Function

I Using Function Modes to Change the Initial Copy Modes
Options General Functions Copier Settings LAN Settings Printer Settings
Input Identification Code
General Functions for Key Operator
Copier Settings for Key Operator
LAN Settings for Key Operator
Printer Settings for Key Operator

FUNCTION Key RESET Key

COPY SIZE PAPER Key TRAY Key
FUNCTION MODE (1-2) ENTER NO. OR
# Press the FUNCTION Key $ Press 1 (GENERAL FUNCTIONS) or 2 (COPIER SETTINGS) key. You may also use the (G or F) keys. % Press the SET key. & Press the Keypad to select function modes or use the (G or F) keys. ( Follow the on screen instructions. ) After setting, press the SET key to set up the function.
I Checking the Copiers Total Counter To display the copiers Total Counter, press the COPY SIZE and PAPER TRAY keys simultaneously.
C Please refer to each options operating instructions for function settings.
Function General Functions
No. Modes SORT MODE DEFAULT SORT MEMORY USAGE Function Selects the sort mode. C NON-SORT, SORT Displays the amount of sort memory used on the panel. C OFF, DISPLAY Copy usage and copy limit of the selected department and total copy usage will appear on the screen. Select Sort-Rotate mode. COFF, ON Input the key operator ID code. Initial Setting NON-SORT OFF

DEPT. COUNTER

SORT-ROTATE DEFAULT KEY OPERATOR MODE
Consult your service technician. OFF

Function Copier Settings

No. 00 Modes MARGIN DEFAULT Function Selects the margin position and shift value. C POSITION (Left, Right, Top, Bottom) C VALUE (5 - 99 mm) Selects the edge mode (Equal Rate = set the same value for X & Y or Individual = set the value for X & Y individually) and width. C EQUAL RATE (X & Y ), INDIVIDUAL C 5 - 99 mm Selects the book Center Void margin width. C 5- 99 mm Select the reduction ratio in margin mode. C INVALID, VALID Initial Setting LEFT 10 mm EQUAL RATE 5 mm

EDGE DEFAULT

BOOK MARGIN DEF. FRAME MARGIN 2-SIDED MODE DEF. 2 in 1 WITH FRAME DIGITAL SKYSHOT MANUAL SKYSHOT

20 mm INVALID

OFF Function sets the duplex priority mode. COFF, 1 \ 2, 2 \ 2, Book \ 2 (For DP-2010E) Selects whether or not to disable edge deletion. C INVALID, VALID Enables or disables the use of skyshot mode. C OFF, NORMAL, QUALITY Enables or disables the use of Manual Skyshot. C OFF; M1 ON; M2 ON; M1, M2 ON Automatically adjusts the copy density for text and photographic originals. C INVALID, VALID Selects the binding location for 1 \ 2 Copy. C LONG EDGE, SHORT EDGE (For DP-2010E) Selects the binding location for 2 \ 1 Copy. C LONG EDGE, SHORT EDGE (For DP-2010E) INVALID NORMAL OFF

AUTO EXPOSURE

1 \ 2 BINDING DEF. 2 \ 1 BINDING DEF. BOOK \ 2 DEFAULT

LONG EDGE LONG EDGE

2 in 1 DEFAULT
Selects the page order and book format for FLIPPING Book \ 2 Copy. L\R 1. BOOK FORMAT (1: FACING, 2: FLIPPING) 2. PAGE ORDER (1: L \ R, 2: R \ L) (For DP-2010E) Selects the orientation and layout for 2 in 1 Copy. PORTRAIT L\R C ORIENTATION (Portrait, LANDSCAPE) C LAYOUT (L \ R, R \ L) Selects the 2 page mode. C L \ R, R \ L Input key operator ID code. L\R
2 PAGE MODE DEF. KEY OPERATOR MODE
C Certain Functions or Parameters are available for selection only when their respective option is installed.
Function General Functions for Key Operator
No. Modes AUTO RESET TIME ENERGY SAVER MODE Function Selects the Control Panel reset time. C OFF, 30 sec, 1 min., 2 min., 3 min., 4 min. Sets the Energy Saver mode and time. C INVALID, ENERGY-SAVER, SLEEP Energy save mode timer : 1-120 minutes Sleep mode timer : 1-120 minutes Initial Setting 1 min. SLEEP
LANGUAGE DEFAULT SPECIAL TRAY 1 SPECIAL TRAY 2 KEY/TOUCH BEEP BYPASS SET BEEP
Selects the message language of the display. A-ENGLISH C A-ENGLISH, C-FRENCH, SPANISH Sets the paper tray for special paper (ex: colored). NONE C NONE, TRAY 1, TRAY 2, BYPASS Sets the paper tray for special paper. C NONE, TRAY 1, TRAY 2, BYPASS Sets the panel touch sound. C OFF, SOFT, LOUD Sets the sound when put paper(s) on bypass tray. C 1: INVALID 2: VALID Sets the sound when put paper(s) on ADF. C 1: INVALID 2: VALID Monitors copy usage of each department. (1) TOTAL COUNTER (2) DEPT. COUNTER (3) DEPT. COUNTER LIST Total print out volume from the main unit. Total print out volume from the PC. NONE

INVALID

ORIG. SET BEEP ADF DEPT. COUNTER MODE
VALID Consult your service technician.
TOTAL COUNT PC PRINT COUNT TCP/IP ADDRESS

TCP/IP SUBNET MSK

TCP/IP G/W ADDR.

COPY SETTING LIST

Sets the IP Address assigned to your machine. C 3 digit 4 (Use the MEMORY IN key to enter the. between each set of 3-digit numbers) Sets the Subnet Mask. C 3 digit 4 (Use the MEMORY IN key to enter the. between each set of 3-digit numbers) Sets the Subnet Mask. C 3 digit 4 (Use the MEMORY IN key to enter the. between each set of 3-digit numbers) Prints list containing Current Setting and Standard Setting.
Contact your Network Adminstrator. Contact your Network Adminstrator. Contact your Network Adminstrator.
C It is necessary to input the Key Operator ID code before changing items on this page. C The Special Tray 1 and 2 are not auto-selectable in the switching mode. Not available for plain copier, but will be available when installing options with advanced functions. (See page 57)
Function Copier Settings for Key Operator
No. Modes ORIGINAL (HOME) TEXT CONTRAST T/P CONTRAST PHOTO CONTRAST MAX. COPY SETTING M1, SIZE Function Selects original setting C TEXT, T/P (Text/Photo), PHOTO Selects contrast for Text mode C1 ~ 5 Selects contrast for Text/Photo mode C1 ~ 5 Selects contrast for Photo mode C1 ~ 5 Determines whether to limit number of copies C 1 ~ 999 Input a size in memory 1 for frequent usage size. C X: 5~432/Y: 5~297 mm (See page 22) Input a size in memory 2 for frequent usage size. C X: 5~432/Y: 5~297 mm (See page 22) Selects the memory full action C PRINT, CANCEL Initial Setting T/P (Text/Photo) mm (X) (Y)

M2, SIZE

mm (X) (Y)

MEM. FULL ACTION

C It is necessary to input the Key Operator ID code before changing items on this page.
Function Function Setting
I Changing the Auto Exposure Setting
You can select whether the copying density is adjusted automatically for text and photographic originals.

Press the FUNCTION key.

FUNCTION Key

Proceed as Follows:

# Press the 2 key to select COPIER SETTINGS.
2:COPIER SETTINGS PRESS SET TO SELECT

$ Press the SET key.

% Press 8 and SET key to select AUTO EXPOSURE MODE. & Press 1 or 2 key to select whether Auto Exposure is to be carried out or not. ( Press the SET key to set up the AUTO EXPOSURE MODE. ) Press the RESET key to exit the Function mode.

08 AUTO EXPOSURE 2:VALID

Function Function Setting for Key Operator
I Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size paper. To change the paper size, perform the steps shown below.
# Press the 1 key to select GENERAL FUNCTIONS.

C Paste-ups C Pressure sensitive or carbon backed papers C Paper with excessive curl C Stapled originals C Freshly printed copies from a laser printer
C To copy these kinds of originals, use the Platen Glass instead.

Adding Paper (J) J

I 550-Sheet Paper Tray

Pull the Paper Tray out.

Place the paper with the copying surface facing upward.
Special papers, like glossy paper, mailing labels and transparencies cannot be used in the paper tray. Use the Sheet Bypass for special paper.
Make sure paper is not loaded above the overfill indicator located in the Paper Tray.
Firmly push the Paper Tray back into the copier.
C Do not use paper with folds or wrinkles. Refer to page 35 for details on adjusting the paper tray size. C Unused paper should always be placed into a bag and the opening should be sealed for storage. If the paper is left exposed, problems such as paper curl, paper jams, wrinkles or loss of copied image quality may occur.
Problem Solving/U13 Adding the Toner and Replacing Toner Waste Container (?) ?

Open the Front Cover.

Remove the Toner Waste Container by slowly pulling it towards the left as illustrated.
Seal the container with the enclosed cap and dispose of it properly.
# Turn the empty Toner Bottle counter-clockwise until it stops. The Arrow mark (Unlocked symbol ) visible on the end of the Toner Bottle is aligned with the Arrow mark on the machine. Note: To prevent toner spill, ensure that the key is facing upwards before removing the toner bottle. $ Pull the empty Toner Bottle out. Note: If the bottle will not pull out from the machine, turn the bottle slightly in either direction to release the key and try it again.
Continued on the next page.
C For optimum copy quality use the recommended Panasonic toner. Store toner in a cool dark place. Do not unseal toner before use. Use it as fast as possible after unsealing. C When U13 is displayed the Add Toner Warning Indicator will begin to flash. This message is to prompt you that the toner bottle is nearly empty (approx. 300-sheets can be printed). This message will continue to be displayed until the bottle is replaced. When the countdown counter reaches 0, the copier will stop operating. To clear the message and enable the copier to operate, replace the empty toner bottle with a new one.

# Lift up the ADF Input Tray. $ Open the ADF exit cover. % Remove the misfed paper. & Close the ADF exit cover. ( Close the ADF Input Tray.
C Push the tab on the center of the Entry Cover to close it. C To prevent original(s) damage, please make sure to open the ADF Cover before removing misfed original(s).
# Open the ADF Cover. Note: To prevent damaging the originals, open the ADF Cover before removing the misfed original(s). $ Remove the misfed paper. % Close the ADF Cover. & Close the ADF.
C To prevent original(s) damage, please make sure to open the ADF Cover before removing misfed original(s).

Troubleshooting

Before Calling Service

Unit Does Not Operate

Action
Does the display light? (No) Does the Energy Saver key flash (or light) and displays are turned OFF? (See page 24) (No) Does any of the U## codes and messages appear on the display? (U01, U07, U13, U14, U20 and U21) (See page 54) (No) Does the add paper indicator and message appear on the display? (J) (No) Does the paper misfeed indicator and message appear on the display? (I) (No) Does E#-## indicator and message appear on the display? (Yes) (Yes) (Yes) (Yes)
Check if the Power Switch is turned On and that the power cord is connected into the outlet.
Press Energy Saver key on the Control Panel. (Yes) Perform actions in accordance with each message. (Yes) Add paper. (See page 42)
Remove the misfed paper. (See page 45)
Turn the copier Off, then On. If the Error Code does not clear, call for service.
When the Add Toner Warning Indicator begins to flash or is lit, replace the toner bottle with a new one. After this warning is activated, machine operation will begin with the Toner Charging Mode (approximately 3 minutes to complete) each time the power switch is turned Off then On or if the Front/Right Cover is opened and then closed. Note: When the warning indicator starts flashing, a 300-sheet count-down counter is activated, and upon reaching 0 the machine will stop operating. The 300-sheet counter is based on 6 % fill, depending on the density some pages may print Blank. Machine operation and displays are as follows: 1. When turning the power switch to On or opening and then closing the Front/Right Cover, the machine starts to warm-up and the LCD displays:

PLEASE WAIT.

2. The Toner Charging Mode starts and the LCD displays:

CHARGING TONER

Add Toner Warning Indicator: C Flashing = Toner Bottle is nearly empty C Lit = Toner Bottle is empty 3. This message is displayed for approximately 200 seconds.

Each is approximately 10 sec.
4. This massage will continue to be displayed until the warm-up cycle is completed, and if the toner bottle was replaced. Upon completion, the Add Toner Warning Indicator automatically turns Off.

Light Copies

Does the exposure indicator say Lighter? (No) Does the add toner indicator and message appear on the display? (?) (Yes) Marked Copies (Yes)
Press the Darker key until the indicator LED is set to Darker. (See page 12)

Add Toner. (See page 43)

Is the copier Platen Glass or Platen Cover dirty? (Yes)
Clean the Glass or Platen Cover. (See page 54)
Troubleshooting User Error Codes (U Code)
The self-diagnostic functions detect troubles in the important components of the copier. When any trouble occurs, the copier stops. Code U01 U07 U13 U14 U20 U21 Display Message CLOSE FRONT/RT COVER CLOSE FEED COVER TONER IS RUNNING LOW NO WASTE TONER BOX WASTE TONER BOX IS FULL CLOSE ADF COVER CLOSE PLATEN COVER Check Points Front Cover is open. Feed Cover is open. 1. Toner Cartridge is incorrectly installed. 2. Low Toner or No Toner Waste Container. 1. Toner Waste Container is incorrectly installed. 2. Toner Waste Container is full of toner. ADF Cover is open. While the copier is initializing, the ADF Cover was opened. (Optional ADF installed)
I If the measures outlined above do not solve the problem, call your Service provider.

Copier Care

I As a rule, clean weekly.
Platen/Platen Cover Platen Cover Platen (Glass) # Wipe marks off with a cloth and a neutral detergent. $ Wipe again with a dry cloth.

Specifications

I DP-1810P/2010E (Copier)
Type Platen Type Acceptable Originals Copying Method Fixing Method Imaging Method Resolution Maximum Copy Size Minimum Copy Size Void Area Warm Up Time First Copy Time Multi-Copy Speed Enlargement Ratios Reduction Ratios Paper Feed Desktop Fixed Sheets, Books (max. size = Ledger) Laser Electrophotography Heat Roller Fixing Dry-Type Single component imaging Max. 600 dpi Ledger Invoice, via paper tray Max. 0.2 in (5 mm) Approx. 30 seconds (68F/20C) Approx. 6.5 seconds (Letter , from 1st tray)

DP-1810P : 18 cpm (Letter size) DP-2010E : 20 cpm (Letter size) Preset: 121 %, 129 %, 155 %, 200 % Variable: from 101 to 200 % in 1 % increments Preset: 79 %, 77 %, 65 %, 61 %, 50 % Variable: from 99 to 50 % in 1 % increments Paper Tray (550 sheets 1) + Sheet Bypass (50 sheets) 2nd Paper Feed Module (550 sheets - option) 3rd Paper Feed Module (550 sheets - option) 4th Paper Feed Module (550 sheets - option) Paper Tray: 16 - 24 lb (60 - 90 g/m2) [Sheet Bypass: 15 - 34 lb (56 - 128 g/m2)] Max. 999 sheets (Output Tray capacity is 250 sheets) AC 120 V, 50/60 Hz, 9 A Max. 1.2 kW, 1.5 Wh in Sleep Mode DP-1810P: 23.1 23.8 18.0 in (458 mm) DP-2010E: 23.1 23.8 22.6 in (573 mm) DP-1810P: 90 lb (41 kg) DP-2010E: 113 lb (51 kg) Temperature: 50 - 86F (10 - 30C) Relative Humidity: 30 - 80 % (However, the humidity should be 70 % or less at a temperature of 86F (30C), and the temperature should be 86F (30C) or less at a humidity level of 85 %.)
Paper Weight Quantity Selector Electrical Consumption Energy Consumption Dimensions (W D H) Weight Operating Environment
C Specifications are subject to change without notice.

I ADF (DA-AS180)

DA-AS180 Tray Capacity Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Letter, Invoice: 50 sheets (20 lb) Ledger, Legal: 30 sheets (20 lb) Invoice/Letter/Legal/Ledger lb (g/m2) Supplied from the copier 22.0 19.7 4.4 in (112 mm) 11.0 lb (5.0 kg)

I i-ADF (DA-AR201)

DA-AR201 Tray Capacity Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Letter, Invoice: 50 sheets (20 lb) Ledger, Legal: 30 sheets (20 lb) Invoice/Letter/Legal/Ledger lb (g/m2) Supplied from the copier 21.7 20.5 5.3 in (135 mm) 20.5 lb (9.3 kg)
I 2nd/4th Paper Feed Module (DA-DS182)
DA-DS182 Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Invoice/Letter/Legal/Ledger lb (g/m2) Supplied from the copier 21.7 6.1 23.0 in (585 mm) 20.9 lb (9.5 kg)
I 3rd Paper Feed Module (DA-DS183)
DA-DS183 Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Invoice/Letter/Legal/Ledger lb (g/m2) Supplied from the copier 21.7 6.1 23.0 in (585 mm) 20.9 lb (9.5 kg)

Options and Supplies

Panasonic Document Imaging Company A Business Unit of Matsushita Electric Corporation of America Two Panasonic Way Secaucus, New Jersey 07094
Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3
S0402-0 DZSD001728-0 April 2002 Printed in Japan

 

Tags

ZWF-1221W E-TEN M600 I-aquos Server Roland RC-2 FS-SD1000R Motion 3 Printer-USB DWL-G520 HP Ipaq Command BD-C8000 Catera 2000 MX-16 Reference SE211 Einhell H126 TS-H552B RC897T Sennheiser K6 42PFL7403D Bx1300LCD Smart UPS Server Midland G225 Enduro KD-SH909 Fantasy VII Gamestudio-A4 KX-TCD420E MP800R IA5864 Review ECM-PC50 32A558p3F VGN-CS11z T W18THM-nb60 TX-SR875 CDX-A360 D-NE518CK TU-245 HBH-608 Clubhouse Afipr B3410 Showtec 512 LA-36 PN 79-290 65-12 S10 2002 GFX-707 KD-S676R RD-100 LE15S51BP 2063513 Edition SDP-3 VP-W75 Motopure H15 Thinkpad A22E 21FU6TL-l4 BC120XLT FX3020 EMP-710 WD-10150NUP TE-2200 LH-T755 Downr NAV 6500 DNS-343 MC-80 2414NB IP 301 IC-F3gt GS TW-4100E Mustang-2007 CT-A9X TX-32PM11F A-X700 CX 6T KV-1415 Pages UF-S2 Light NW-E55 Roland A-37 Cookers Edition GT-E1210M KTF-3010 AG-H600NT Radio Clock Samsung 210 DCR-IP55E Temporis 27 Software 59294 Eheim 3581 C54APT SEW 67A

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101