Insertion/Overlay/Job Memory.... Overlay.... File Edit.... Form Overlay.... Job Memory.... Other Features.... Concurrent Copying.... Energy Saver (Energy Saver Mode, Sleep/Shutdown Mode). Skyshot Mode... Interrupt Mode... 56 57
Using Function Modes to Change the Initial Copy Modes.. Procedure... General Settings.... Copier Settings.... Scanner Settings.... Printer Settings.... For Key Operator..... General Settings.... Copier Settings.... Printer Settings.... For Example..... Changing the Auto Contrast Setting... Changing the Paper Size... Weekly Timer.... Department Counter.... Network Settings.... Combined Function Table... 74
Components..... 75 Finisher.... 76

Network Scanner (Option)

Document Scanning.... Adding your PC IP Address... Editing your PC IP Address... Erasing the Address.... 80 80
Troubleshooting.... 82 Replacing the Battery.... 84
Specifications..... 86 Index..... 92

Precautions

Laser Safety LASER SAFETY
This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury.

CAUTION:

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

Caution Label

Manufacturers Name and Address

Factory ID

Precautions Handling
Do not look directly at the exposure lamp when copying. Do not turn the power switches Off or open the front cover during copying. Do not drop paper clips or other metal objects into the copier. If you are not going to use the copier for long periods of time, turn OFF the Power Switch on the Left Side of the machine and wait 10 seconds then, turn OFF the Main Power Switch on the Back Side of the machine. Energy Save Mode Notice If the energy save mode is set to Shutdown mode, the following functions will not work while the unit is in this mode. When using the following functions, we recommend that you leave the energy save mode in the initial factory default setting (Sleep). (See page 66) 1) Data Reception Function while Tandem/Remote Copying is being used 2) Printer Function (Local and Network Connections) Identification (Key Operator ID) Code A number of Copy/Scan Mode functions can be checked or changed using the Function Mode, however, access to more advanced functions requires the input of the Identification (Key Operator ID) Code. For Key Operator: To secure the advanced functions of your machine, select and input an Identification (Key Operator ID) Code then, record it and keep it in a safe place for your future reference. (For more details, consult with the authorized service provider)

This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org >.

Operation Chart

Original
1 Turn the Main Power Switch On From (Back side of the ADF Copier) (See page 8)

Face Up

Tray or

Max. 70 originals

If set in other function mode

Original Guides

Adjust to the originals width
Original Guides From Platen
Turn the Power Load Paper Switch On (Left side of the Copier)

INV INV INV LTR LGL LDR

Face Down
If the original is not positioned properly, a portion of the original may not be copied. For originals smaller than Invoice size, position the original within the Invoice area and select Invoice.
INVOICE-R LETTER-R LEDGER LEGAL

LTR LDR

Adding Paper (550-Sheet Paper Tray 2-4) 3

LETTER

INV LTR LGL

INVOICE

Max Level Indicator

Paper Weight: 16-24 lb

Paper Capacity: 550 Sheets (20 lb)
NOTE: When changing the paper size, refer to page 70. Paper Tray 3 and 4 (Option) 1550-Sheet Paper Tray (See page 12) 3000 Sheet Large Capacity Paper Tray (Option) (See Page 12)
Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.

Until it Stops

Sheet Bypass
Face Down Adjust the side guides. Incorrect adjustment may cause the paper to wrinkle, misfeed or skew. NOTE: If the paper size is not detected, remove paper and press Reset Key. Then, load the paper again. Load Paper (Do not exceed limit mark) Approximately up to 50 Letter size sheets/20 lb Paper Weight: 15-35 lb To add paper to the Sheet Bypass, remove the paper left on the tray, and align it with the added paper and load them together onto the tray.

Side Guides

Select desired settings

COPY SIZE

Reduction/Enlargement only (See page 32) Number of Copies (Max. 999) Adjust the Manual Exposure or Select type of Original(s) Mainly Text Text and Photo combined Mainly Photo

Copy Jobs

(See pages 30-37)

(See pages 38-43)

(See pages 44 and 45)

(See pages 46-51)

(See pages 52-55)
(See pages 54 and 55) ex: DA-FS330

Problem Solving

Removing a Misfed Paper (See pages 16-25)
Adding Paper (See pages 10 and 12) Replacing Toner Bottle (See page 12) Replacing Toner Waste Container (Call your Service provider)

UXX EXX

User Error Code (See page 17) Machine Error Code (Call your Service provider)
Replacing Staple Cartridge (See pages 14-17) When the optional Finisher is installed.
Adding Paper (1550-Sheet Paper Tray 1) 3
Paper Weight: 16-24 lb Paper Capacity: 1550 Sheets (20 lb)
Adding Paper (3000-Sheet Large Capacity Paper Tray (LCT) (Option)) 1 2

Face-Up

Paper Feed Tray
When using paper with one side already printed, load the paper with the unprinted side facing upward. After tray stops, place paper neatly on the tray. Letter size only (Portrait).
Do not touch the tray while it is moving.
Letter-R/Legal size is available when
optional Letter-R/Legal Size LCT Adapter (DA-TK31) is installed.
Replacing Toner Bottle/Replacing Toner Waste Container 1

Toner Hopper

Replace Toner Bottle
Replace Toner Waste Container
(Call your Service provider)

Toner Bottle

Hopper

3 Overfill Indicator

Paper Capacity: 3000 Sheets (20 lb)

New Toner Bottle

Empty Toner Bottle
10 to 15 times Shake the new Toner Bottle well to loosen the contents.
(ATTENTION) For optimum copy quality it is recommended that only Panasonic Brand toner is used in the copier. Store toner in a cool dark area with low humidity. Do not unseal the toner bottle unless you are ready to use it.
Problem Solving (Common operation)
Replacing the Staple Cartridge (Common operation) (When optional Finisher is installed.)

DA-FS330 or

Replace the Staples Case as following procedures. For 1-Bin Saddle-Stitch Finisher (DA-FS355A) (See page 16)

Add Staples

DA-FS355A/FS600/FS605
2-Bin Finisher (DA-FS330) 1

Stapler Unit

Stapler Cover

Lock Lever

2-Bin Finisher (DA-FS600)/2 Bin Saddle-Stich Finisher (DA-FS605) 3

Staple Cartridge

Staple Cover
When supplying the Saddle Sticher Unit with staples (DA-FS605 only) 2 3

Lower Front Cover

Stitcher Unit Green Handle

Check the operation

Contents Warning Indications : Add Toner : Add Paper Original Icon Original Size Indication Job Build and SADF/Multi-Size Feed Mode Indication Rotate Mode Indication Number of Copies / Original(s) Machine / User Error Code Indication (E1-01, U13, etc.) Copy Icon Copy Size Indication Reserve a Job Button Finisher Functions Indication Machine Outline with Tray Selection (Paper Tray and Output Tray) Paper Level and Size Indication Paper Tray Selection Button Tandem/Remote Button Indication Tandem/Remote Button Density Indicator (7 steps) Manual Exposure Select Buttons (Lighter and Darker) Original Mode Select Button (Text; Text / Photo; Photo) Copy Image and Paper Image Indication Copy Ratio Indication Original Image Indication Completion Notice Button Job Queue Button Job Settings Button Selected copy jobs will be indicated on the right side of the touch panel display. (2-Sided/Original Copy, Sort/Finish, Zoom/Effects, Insertion/Overlay modes) Proof Set Button Function Categories : Call Service (Call your Service Provider) : Waste Toner
See Page 10 - 13 42, 43 17, 82 11, 31 11, 31 11, 31
Touch Panel Display Indications

Basic Menu

Copying the Same Size Originals (1:1)
Copy size is automatically selected.
If original size is not detected
Position of the original(s)
On the i-ADF On the Platen
Note 1) Once after setting originals , pressing Start button, do not press originals as it may cause original jam. Note 2) When originals with clipped or stapled, take off clips or staples, then set originals neat.

Using the ADF

Originals that cannot be used Post Cards, Drawing Papers, Transparencies, Labelling Papers, Heavyweight Papers, Thin Art Papers, Film Thermal Papers Inappropriate Originals Paper with a smooth surface such as glossy and coated papers Transparencies Originals with a Lead Edge that is ripped, creased, folded, punched, or glued. Mixed width size Originals (except a combination of Ledger and Letter) Paste-ups Pressure sensitive or carbon backed papers Paper with excessive curl Stapled originals Freshly printed copies from a laser printer Originals with fresh White-Out (Liquid paper correction fluid)

You can select to delete multiple/all jobs. Priority can be selected for print jobs only
when the optional HDD is installed.

Completion Notice

A Job Completion Notice via a pop up screen on the Desktop of your PC when the Copy Job is completed. Before using the Completion Notice, install the Panasonic-DMS included with the machine.

or Select Pop up Display

Copy is completed.
Right click the Status Monitor icon

Pop up screen

The PRINT JOB QUEUE requires the Key Operators Password, however, the COPY JOB QUEUE does not require a password. The Job Queue selection function is only available when the optional HDD is installed.

Input password (4-digit)

2 times
Select the desired PC Address

Number of Copies

This Completion Notice is available only when connected to the Network. To reset the Completion Notice, press the CANCEL button.

2-Sided/Original

1-Sided

2-Sided Copy

2-Sided, 2-Sided

2-Sided

1-Sided, 2-Sided

1-Sided

(Copy only)
Reduction/ Enlargement only

Book 2-Sided Copy 1 2

(1st Page BLANK)

Blank Page

Platen
Ex : Ledger size original Book Mark Ledger

Letter Ledger

(1st Page IMAGED)
Center book by length and
width according to center marks only for Ledger size.

Bind position

When clearing the 2-Sided Copy:
From Platen: When "Last Original?" message is displayed. Ex: 2 originals Touch "NO" button. Place next original on the platen. 3 Press Start Key. 4 Touch "YES" button.
Original format Copy format

Number of Copies or or

When "Last Original?" message is displayed. Ex: 2 originals Touch "NO" button. Place next original on the platen. 3 Press Start Key. 4 Touch "YES" button.

2 Page Copy

Copying two facing pages or a Ledger size original on two separate Letter size sheets.
Platen Example: Ledger size original

N in 1 Copy

From two/four/six 1-Sided originals, side by side, to 1-Sided pages.

2 in 1 Copy

4 in 1 Copy

6 in 1 Copy

2-Sided Copy
From 4/8/12 1-Sided originals, side by side, to 2-Sided copies. Number of Copies
From Platen: Same Procedures as for 2 Page Copy

Booklet Copy

Formats the output in a manner so that documents can be folded and/or saddle stitched like a book.
Letter or Invoice originals only
When optional 1/2-Bin Saddle-Stitch
Finisher (DA-FS355A/FS605) is installed.
Default copy size is Reduced, copy size can be selected as 100 % or Reduced.

When the Key Operator Mode:
Setting the Function Parameter
Identification Code (4-digit)
Set the desired Function Parameter(s).

General Settings

Screen No. Modes 00 Power On Default Mode 01 Manual Add Toner 02 Sort Memory Status 01/Departmental Counter Function Selects mode. COPY, PRINTER, SCANNER, FAX Adds toner manually. Off, On Indicates the sorting memory status. Off, On Indicates the department counter. Initial Setting COPY Off Off Consult with an authorized service provider

04 Key Operator Mode

Input the Key Operator ID Code.
When the optional Network Scaner Module/Fax
Communication Board is installed.

Copier Settings

Screen No. Modes 00 Margin Value Default 01 Edge Value Default 02 Book Value Default 01/Margin Reduction Def. 04 2-Sided Mode Default 05 Reduce N in 1 For Space 06 Digital Skyshot Mode 02/Manual Skyshot Mode 08 Auto Contrast Adjust Function Selects the margin shift value. 5 mm, 10 mm, 15 mm, 20 mm Selects the edge width. 5 mm, 10 mm, 15 mm, 20 mm Selects the book void width. 15 mm, 20 mm, 25 mm, 30 mm Selects the reduction ratio in margin mode. No, Yes Function sets the duplex priority mode. No, 1 to 2, 2 to 2, B to 2 (B: Book) Selects whether to disable edge deletion. No, Yes Enables or disables the use of Skyshot mode. No, Freeshp (Freeshape), Parallel Initial Setting 10 mm 5 mm 20 mm No No No Freeshp
Enables or disables the use of Manual Skyshot. Off Off, M1, On, M2, On, M1, M2, On Automatically adjusts the copy density for text and photographic originals. No, Yes Selects the N in 1 default mode. 2 in 1, 4 in 1, 6 in 1 Selects the booklet magnification. 100 %, Reduce Selects the sort mode. Non-Sort, Sort, Stplsort (Staple-Sort), Sftgroup (Shift-Group) Selects the sort mode. Non-Sort, Sort, Stplsort (Staple-Sort), Sftgroup (Shift-Group) Selects the staple position. Landscap (Landscape), Portrait, Center Selects the stamping mode. Page, Date, Issue Selects the page numbering style. -n-, n/m Enables the hole punch mode. Off, On Selects the dotted line. None, Print Input Key Operator ID code. Yes
09 N in 1 Default Mode 11 Booklet Default Mag. 12 Sort Mode Def. ADF Copy

2 in 1 Reduce Sort

13 Sort Mode Def. FB Copy
14 Staple Position Setting 15 Stamping Default Mode 16 Page Numbering Style 17 Hole Punch Default 04/Img. Repeat Dotted Line 19 Key Operator Mode
Portrait Page -nOff Print

FB: Platen

Scanner Settings
Screen No. Modes 00 Original Mode Default 01 Compression Mode Def. 02 Resolution Default 01/Job Bulid And SADF Mode 04 Bind Edge 2-Side Orig. 05 Add New Address 06 Edit Address Book 07 Delete Address 08 Scanner Settings Print 09 XMF File Type Function Sets the original setting. Text, T/P (Text/Photo), Photo Sets the default compression mode setting. MH, MR, MMR, JBIG Sets the default resolution setting. 150dpi, 300dpi, 600dpi Sets the SADF mode setting. No, Yes Sets the bind position, 2-Sided original setting. Long, Short To add a new address. To edit the address book. (See page 80) To delete an address. To print scanner settings print. Stop, Start Sets the default XMF File Type. TIFF, PDF PDF T/P JBIG 600dpi No Long Initial Setting

Printer Settings

Screen No. Modes 00 Number Of Prints 01 Paper Size Function Sets the initial number of prints. 1 ~ 999 Sets the paper size setting. A3, B4, A4, B5, A5, LEDGER, LEGAL, LETTER, INVOICE, 8 x 13, 8.5 x 13 Sets the Paper Tray setting. Auto, Bypass, Tray 1, Tray 2, Tray 3, Tray 4, LCT Sets the print direction setting. Portrait, Landscap (Landscape) Sets the auto tray setting. Off, On Sets the 2-sided print setting. Off, On Sets the bind position. Long, Short Sets the resolution setting. 1200 x 600, 600 x 600, 300 x 300 Sets the PCL font. 0 ~ 99 Sets PCL symbol table. 0 ~ 35 Sets the PCL pitch. 0.44 - 99.99 Sets PCL point size. 4.00 - 999.75 Sets PCL lines/page. 5 - 123 Sets PCL return character. CR, CR + LF Converts A4 to Letter automatically. Off, On Indicates the mailbox memory status. Sets print data. Stop, Start Input the Key Operator ID Code. Stop 1 LETTER Initial Setting

02 Paper Tray

03 Print Direction 04 Auto Tray Selection 05 2-Sided Print 06 Bind Edge 02/Resolution 08 Font (PCL) 09 Symbol Table (PCL) 10 Pitch (PCL) 11 Point Size (PCL) 12 Lines/Page (PCL) 13 Return Character (PCL) 14 Mutual A4/LTR 15 Mailbox Memory Status 04/Print Data 19 Key Operator Mode
Portrait On Off Long 600 x 11 10.00 012.CR Off

For Key Operator

Screen No. Modes 00 Paper Size Function Sets the paper size of each paper drawer. Ledger, Legal, Letter, Letter-R, Invoice, A3, B4, A4, A4-R, B5, B5-R, A5, 8 x 13, 8.5 x 13, FLS2, AUTO Selects the Control Panel reset time. None, 30 sec., 1 min., 2 min., 3 min., 4 min. Sets the Energy Saver mode and time. 1-240 minutes Sets the Sleep/Shutdown timer. None, 1-240 minutes Initial Setting Consult with an authorised service dealer 1 min.
01 Auto Reset Time 01/Power Save Mode Timer 03 Sleep/Shutdown Timer
minutes (DP-4520/6020) 15 minutes (DP-3520) English None
04 Language Default 05 Special Paper Tray 1
Selects the message language of the display. Sets the paper drawer for special paper (ex: coloured). None, Tray 1, Tray 2, Tray 3, Tray 4, Bypass, LCT Sets the paper drawer for special paper (ex: coloured). None, Tray 1, Tray 2, Tray 3, Tray 4, Bypass, LCT Sets the output bin. Upper, Bottom Sets the output bin. Upper, Bottom Sets the output bin. Upper, Bottom Copier will automatically rotate image and print when selected paper tray is empty. Off, On Beep sounds when touching the panel. Off, Soft, Loud

06 Special Paper Tray 2

07 COPY Output Bin 08 PRINTER Output Bin 09 FAX/EMAIL Output Bin 10 Auto Paper Out Rotate

Upper Bottom Bottom Off

11 TCH Panel Beep Sound 03/Original Set Beep Sound 13 Orig. Set In ADF Sound 14 Dept. Counter Mode
Beep sounds when original is set on the Platen. No No, Yes Beep sounds when original is set into the ADF. No, Yes Monitors copy usage of each department. (1) Print usage of each department (2) Print limit of each department (3) ID code of each department Yes Consult with an authorised service dealer
The Key Operator ID Code is required before any changes can be made to items on this page. Only 3 Paper Sizes (Letter, A4, B5) will be available when selecting Tray 1. AUTO Paper Size can be selected for Tray 2.
Screen No. Modes 15 Fold Position (A3/LDR) 16 Fold Position (B4) 04/Fold Position (A4/LTR-R) 19 Language Sel. Priority 20 Date Time Setting 21 Weekly Timer 22 DHCP Default 23 TCP/IP Address 24 TCP/IP Subnet Mask 25 TCP/IP Default Gateway 26 DNS Server Address 06/Hard Disk Format 28 Hard Disk Error Check -4.0 - +4.0 mm Selects the display message language. Off, On Sets date time registered. Month, Day, Year, Time Sets the weekly On/Off timer. Sets the DHCP. No, Yes Sets user IP address. 3 digits x 4 Sets the subnet mask. 3 digits x 4 Sets the gateway address. 3 digits x 4 Sets the DNS server. No, Yes Selects the hard disk format. Stop, Start Selects the hard disk error check. Stop, Start No Yes 0.0 mm Off -4.0 - +4.0 mm -4.0 - +4.0 mm Function Initial Setting 0.0 mm 0.0 mm
The Key Operator ID Code is required before any changes can be made to items on this page. When Functions No. 22 to 26 are set, cycle the power by turning the Power Switch on the Left side of the machine OFF and ON. Not required in copying mode, but needed when installing options with advanced functions (See page 75).
Screen No. Modes 30 Sleep/Shutdown Select 31 Print General Settings 07/Corona Wire Cleaning 33 MAC Address 34 Address Book Group ID 35 Tandem User Parameter 36 Community Name (1) Function Selects the Sleep/Shutdown mode. Sleep, Shutdown Sets the print of general function. Stop, Start Sets the corona wire cleaning. Off, On Indicates the MAC address. Inputs group ID for address book. 0 ~ 99 Inputs parameter of user machine. Selects to change the SNMP of Community Name (1). Enables read only. Selects to change the SNMP of Community Name (2). Enables read/write. Inputs the device name when necessary. (For Status Monitor/EtherTalk Machine Name) Inputs the device location when necessary. (For Status Monitor) Sets the daylight time. No, Yes Selects the Document Distribution function. No, Yes Inputs the Document Distribution System routing server name. Inputs the Document Distribution System routing server IP address. 3 digits x 4 0. 0. 0. 0. No No 0 Initial Setting Sleep

Scroll to 02/02

Key Name (Max. 15 characters) Ex.: PC Name Document Save Docu. Retrieve
Add the IP Address to Favorites or
For PC For DD Server refer to optional DD Server (DAWS20)
Select a destination (PC) A destination will be indicated ROUTING MENU : refer to optional Document Distribution System (DAWR10). Select a Mode if required Resolution Exposure Original mode 2-Sided Original Thin Original

150dpi: Text mode only.

When DATE/TIME is selected. Select a file format
File name (Max. 20 characters) Ex.: Jack

When CUSTOM is selected.

PC Screen
Refer to PDMS Operating Instructions on the CD-ROM.
IP Address Ex.: 192.168.1.10 Server name (Max. 15 characters) Ex.: SALES DEPT
When entering a 1 or 2-digit
number segment, add 00 or 0 in front of the number, to scroll to the next segment of numbers or press the key to enter a period after the number.

Port number

Editing your PC IP Address
If you have to change or erase any of the Address Book stations, follow the steps below.
New name (Max. 15 characters) Ex.: SALES DEPT 01
New key name (Max. 15 characters) Ex.: PC Name Document Save Docu. Retrieve

Erasing the Address

If you have to delete any of the Address Book entries.
Select the entry you wish to change New IP Address Ex.: 192.168. 1. 11
Port number For PC For DD Server
number segment, add 00 or 0 in front of the number, to scroll to the next segment of numbers or press the key to enter a period after the number. When clearing the IP address, press the " " key to move to the next segment of the IP address (.) and press the Clear key.
Select the entry you wish to delete

Troubleshooting

Unit Does Not Operate

Action

Does the display light?
Check if the Power Switches (Main Power Switch on the back and Power Switch on the Left Side of the machine) are turned ON and if the power cord is plugged into the AC outlet.
Does the Energy Saver key flash (or light) and displays are turned OFF? (See page 56) Does any of the U## codes and messages appear on the display? (U1, U4, U6, U7, U11.etc.) Does the Add Staples indicator and message appear on the display?

Set the Date and Time 6 7

Scroll to 05/09

The service life of the battery is approximately 1 year under normal use.
Turn the Power Switch on the Left Side of the machine to the ON position and close the Front Cover.
ID Code (Department Code)

Month, Day, Year, Time

Month/Day/Year/Time
Denotes hazards that could result in minor injury or damage to the machine. THIS PRODUCT CONTAINS A LITHIUM BATTERY. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL SOLID WASTE OFFICIALS.

Specifications

DP-3520/4520/6020 (Copier)
Type Platen Type Acceptable Originals Copying Method Fixing Method Imaging Method Resolution Operation Panel Maximum Copy Size Void Area Warm Up Time First Copy Time Desk Top Fixed Sheets, Books (max. Ledger) Laser Electrophotography Heat Roller Fixing Dry-Type Two components imaging Maximum: 600 dpi Touch Panel Display Ledger - Invoice via Paper Tray Max. 0.2 (5 mm) DP-4520/6020 : Approx. 180 seconds (68F/20C) DP-3520 : Approx. 30 seconds (68F/20C) DP-3520 : Approx. 5.8 seconds DP-4520 : Approx. 4.5 seconds DP-6020 : Approx. 3.5 seconds (Letter , from 1st Tray, platen) DP-3520 : 35 cpm (Letter size) DP-4520 : 45 cpm (Letter size) DP-6020 : 60 cpm (Letter size) Preset: 121%, 129%, 155%, 200% Variable: from 101 - 400% in 1% increments Preset: 79%, 77%, 65%, 61%, 50% Variable: from 99 - 25% in 1% increments Paper Tray (1550 sheets + 550 sheets) + Sheet Bypass (50 sheets) + System Console (1100 sheets) Paper Tray: 16 - 24 lb (Bypass: 15 - 35 lb) Maximum: 999 sheets (Optional Exit Tray capacity is 250 sheets) 120V AC, 60Hz, 12A 1.45 kW 23.6 (W) 29.6 (D) 28.9 (H) (735 mm) 289.2 lb (131 kg) : DP-4520/6020 282.6 lb (128 kg) : DP-3520 Temperature: 50 - 86F (10 - 30C) Relative Humidity: 30 - 80% (However, the humidity should be 70% or less at a temperature of 86F (30C), and the temperature should be 80F (27C) or less at a humidity level of 80%.)

Multi-Copy Speed

Enlargement Ratios Reduction Ratios Paper Feed Paper Weight Quantity Selector Electrical Consumption Energy Consumption Dimensions (W D H) Weight Operating Environment
Specifications are subject to change without notice. Modes Normal Operation Power Consumption Approximately 160 Wh (3520) Approximately 210 Wh (4520) Approximately 240 Wh (6020) Approximately 170 Wh (4520) Approximately 180 Wh (6020) Approximately 20 Wh Approximately 4 Wh Warm Up Time N/A Min. 30 sec. recovery (4520/6020) 30 sec. recovery 180 sec. recovery 30 sec. recovery 180 sec. recovery (3520) (4520/6020) (3520) (4520/6020)
Power Saver Mode Sleep Mode Shutdown Mode

i-ADF (Standard)

Tray Capacity Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Maximum 70 sheets (20 lb: 75 g/m2) Invoice/Letter/Legal/Ledger lb (50 - 105 g/m2)/1-sided lb (64 - 105 g/m2)/2-sided Supplied from copier 23.6 23.0 5.4 in (138 mm) 32 lb (14.5 kg)

2-Bin Finisher (DA-FS330)
Mode 1 Bin 2 Bin Paper Size 1 Bin 2 Bin Paper Weight Paper Capacity 1 Bin 2 Bin Staple Paper Size Paper Weight Capacity Point Punch Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Applicable Model Non-sort/Sort Non-sort/Shift-Sort (Letter Portrait only)/Staple (Letter Portrait only) Invoice/Letter/Letter-R/Legal/Ledger Letter 16 - 35 lb (60 - 135 g/m2): Non-sort mode 100 sheets Maximum: 1000 sheets / 30 set (Stapling mode) Letter 17 - 21 lb (64 - 80 g/m2) 2 - 30 sheets: 20 lb (75 g/m2) 1-Point Staple Letter/Ledger: 3-hole 16 - 28 lb (60 - 105 g/m2) Supplied from copier 16.6 20.5 17.0 in (430 mm) 34.1 lb (15.5 kg) DP - 3520
1-Bin Saddle-Stitch Finisher (DA-FS355A)
Mode Bin Tray Paper Size Bin Tray Paper Weight Paper Capacity Bin Tray Staple Paper Size Paper Weight Capacity Point Saddle-Stitch Paper Size Paper Weight Stack Electrical Requirements Dimensions (W D H) Weight Applicable Models Non-sort/Sort/Staple Saddle-Stitch Invoice/Letter/Letter-R/Legal/Ledger Letter-R/Ledger 16 - 35 lb (60 - 135 g/m2): Non-sort mode Maximum: 1000 sheets / 30 set (Stapling mode) Maximum: 20 set Letter/Letter-R/Legal/Ledger 17 - 21 lb (64 - 80 g/m2) 2 - 50 sheets: Letter/Letter-R (20 lb 75 g/m2) 2 - 25 sheets: Legal/Ledger (20 lb 75 g/m2) Rear 1/Front 1/Middle 2-Point Staple Letter-R/Ledger 17 - 21 lb (64 - 80 g/m2) 6 - 10 sheets: 10 sets/1 - 5 sheets: 20 sets Supplied from copier 21.7 23.7 18.3 in (464 mm) 60 lb (27.2 kg) DP-3520/4520

Punch Unit (DA-SP41)

Paper Size Paper Weight Applicable Model
Specifications are subject to change without notice.
Letter/Ledger : 3-hole Letter-R/Legal : 2-hole 17 - 35 lb (64 - 133 g/m2) DA-FS355A

Options and Supplies

Part Name Plain Stand Plain Stand (Short) System Console 1 System Console 2 3000-Sheet Tray (LCT) 2-Bin Finisher 2-Bin Saddle-Stitch Finisher 2-Bin Finisher 1-Bin Saddle-Stitch Finisher Punch Unit for DA-FS600/605 Punch Unit for DA-FS355A Exit Tray Letter-R/Legal Size Adaptor for DA-MA301 Image Memory (16 MB) Image Memory (64 MB) Image Memory (128 MB) Expansion Flash Memory Card, 4 MB Expansion Flash Memory Card, 8 MB Hard Disk Drive Printer Controller Module Network Scanner Module Expansion Board Multi Page Desription language Controller Module Internet Fax/E-Mail Module Fax Communication Board DD Server Software Accounting Software Document Distribution System Part No. DA-D351 DA-D352 DA-DS601 DA-DS602 DA-MA301 DA-FS600 DA-FS605 DA-FS330 DA-FS355A DA-SP31 DA-SP41 DA-XT600 DA-TK31 DA-SM16B DA-SM64B DA-SM28B UE-410047 UE-410048 DA-HD60 DA-PC601 DA-NS600 DA-EM600 DA-MC601 DA-NF600 DA-FG600 DA-WS20 DA-WA10 DA-WR10 For USA/Canada only For USA/Canada only 550 Sheet Paper Tray Sheet Paper Tray Sheet Paper Tray For DP-4520/6020 For DP-4520/6020 For DP-3520 For DP-3520/4520 For DP-4520/6020 DA-FS355A for DP-3520/4520 For DP-3520/4520/6020 For DP-3520/4520/6020 For Electronic Sorting For Electronic Sorting For Electronic Sorting Additional Page Memory for Fax Communication Board (DA-FG600) Additional Page Memory for Fax Communication Board (DA-FG600) For DP-3520/4520/6020 Printer Controller for PCL6 Network Scanner F-ROM 8MB Printer Controller for PCL6/PS3 Internet Fax/E-Mail communication G3 Fax/Tel communication For DD Server function For Accounting function For Document Distribution function Remarks

PS3 is a Page Description Language of the Adobe System Company.

Supplies

Part Name Staple Cartridge Staple Cartridge Staple Cartridge Staple Cartridge Toner Toner Part No. FQ-SS66 FQ-SS50 DQ-SS35 FQ-SS32 DQ-TU241G DQ-TU351G Remarks Staple Cartridge Refills (3) for DA-FS600/605 Staple Cartridge Refills (3) for DA-FS605 (Saddle-Stitch) Staple Cartridge Refills (3) for DA-FS355A Staple Cartridge Refills (3) for DA-FS330 Toner for DP-3520/4520 Toner for DP-6020
1 21... 11... 21... 38 2PAGE.. 40 2-Sided/Original Copy.. 11
DATA STAMP.. 50 Delete printing job(s)... 36 Department Counter.. 73
Accessories... 75 ACTIVE LED (GREEN).. 27 Add Paper Indicator.. 82 Add Staples: 1-Bin Saddle-Stich Finisher (DA-FS355A). 16 2-Bin Finisher (DA-FS330). 14 2-Bin Finisher (DA-FS600)/ 2-Bin Saddle-Stich Finisher (DA-FS605).. 14 Add Toner: Replace Toner Bottle.. 12 Adding Paper (1550-Sheet Paper Tray 1). 12 Adding Paper (3000 Sheet Large Capacity Paper Tray (LCT) (Option)).. 12 Adding Paper (550-Sheet Paper Tray2-4). 10 Adding Paper (Sheet Bypass).. 10 Additional Memory (Image Memory).. 75 ADF.... 30 Adjust the Manual Exposure.. 11, 31 ALARM LED (RED)... 27 AUTO ZOOM.. 46 E#-## indicator.. 82 EDGE... 46 Energy Save Mode Notice.. 8 ENERGY SAVER Key.. 27 Energy Saver Key Flash (or Light).. 82 ERASE.. 55
FILE EDIT.. 54 FILE FORMAT... 78 FILE NAME EDIT... 55 Finisher (DA-FS600/FS605/FS355A/FS330). 76 Finisher Bin... 76 Finisher Punch Hole Residue.. 76 Finisher Punch Unit... 76 Finisher Saddle Stitcher... 76 For Example: Changing the Auto Contrast Setting.. 70 For Example: Changing the Paper Size.. 70 For Example: Department Counter.. 72 For Example: Network Settings.. 72 For Example: Weekly Timer.. 70 FORM OVERLAY... 54 Freeshp (Free Shape).. 56 FUNCTION... 58 FUNCTION Key... 27
BOOK... 46 BOOK 21... 38 BOOKLET.. 40
Cannot Complete Job Exceeds Memory Capacity.. 31 Can Not Complete Confirm Staple Unit (DA-FS330/FS600/FS605).. 14 Can Not Complete Confirm Staple Unit (DA-FS355A)... 16 CENTERING... 48 CLEAR Key... 27 Combined Function Table.. 74 Completion Notice.. 36 Control Panel.. 27 Copier Care... 83 Copier Settings.. 61 Copier Settings (For Key Operator).. 67 Copy Jobs.. 11 COPY Key.. 27 Copy Size Key... 32 Copying on Heavy Paper (Post Cards, etc.).. 30 Copying on Special Paper, etc.. 10 Copying the Same Size Originals (1:1).. 30 Copying with Preset Ratios... 32 COVER... 52 General Settings.. 60 General Settings (For Key Operator). 64

For Service, Call:

Panasonic Digital Document Company Unit of Matsushita Electric Corporation of America Two Panasonic Way Secaucus, New Jersey 07094 http://panasonic.co.jp/pcc/en/
Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3
Ko0803-1103 DZSD002090-1 October 2003 Printed in Japan