Panasonic DP-3520 Manual
Part Numbers Variations: PT6010, 708562016261
Part Number: PT6010
Here you can find all about Panasonic DP-3520, for example manual and review. You can also write a review. [ Report abuse or wrong photo | Share your Panasonic DP-3520 photo ]
User reviews and opinions
|chooker||10:25am on Tuesday, September 21st, 2010|
|Im in love with my Sony Digital Reader! I have a visual impairment and this reader allows me to enlarge the type without distorting the text. I am constantly amazed with my consistant pleasure in using hte ereader. It is a wonderfully Green alternative to paper books. Love my Sony Reader! Bought it in March from Vanns because they had the best price! Still do! Ive already read a book and am on my second.|
|asd123||9:05am on Thursday, September 9th, 2010|
|"I have had my Sony eReader for about six months now and love it. I love to read books, and I will often reread my favorites two or three times. "I read about every review on the internet on just about every web site that I could find that reviewed the ereaders and decided on the Sony. 1.|
|DRCLVC||3:52am on Friday, July 30th, 2010|
|Portable, large memory, the screen is as easy to read as a paper book, long battery life Quite a small screen, turning pages can be slow. When I first purchased the Sony Portable Reader, it was an impulse buy and a treat for myself, to keep u with my gadget addicted partner. I love the Sony E reader because since I found this gadget it has made life sitting on a bay for hours on end whle Im in my Lorry a pleasure and no lo...|
|Jennifer||10:06am on Monday, July 19th, 2010|
|I bought an after market E-Reader charger which was marked as a PSP charger, but it does the job at less than half the price, the spec is the same. No need to buy this charger, get the Official PSP charger as it is approx half the price and will work. I use my PSP for charging my E-Reader.|
|roguejag1||8:24am on Monday, July 5th, 2010|
|Other thoughts on the product would be on who to get the product for. If you have someone that is constantly on the go this is a great product. If you are using this device with a Linux distribution, check out the open source Calibre e-book library manager. It is only a g00g)e search away.|
|tinstaafl||2:51am on Friday, June 11th, 2010|
|Having had the reader 4 months before the screen malfunctioned, all i can say that its not a bad attempt. Having had the reader 4 months before the screen malfunctioned, all i can say that its not a bad attempt.|
|JavaGuy123||12:22am on Saturday, May 29th, 2010|
|Sony PRS 505 reader, nice bit of kit.. Well what a range of reviews, from rubbish to fantastic, not that helpful when trying to decide. Well. Problems with item I wondered if any other customers had any problems with this item. SONY E-READER PRS-505 I bought this even though there was a later version available. Nearly all the reviews said it was much easier to read.|
|Chino||3:12pm on Sunday, March 14th, 2010|
|Brilliant, compact, easy to use and much clearer to read than I expected. I even was surprised to see pictures displayed in a book I purchased. screen clarity, wide range of formats, battery life, compact size with good screen size, font size option, sd card socket supplied software.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
3520 Spec Sheet
office power tool
Up to 35 ppm Digital Input and Output System Standard Network Printing / Document Management Software Powerful Upgrades for Incredible Multifunctionality Advanced Network and Job Management Capability
General Functions Type Copy/Print Process Developing Process Automatic Document Feeder Paper Feed Semi Console Laser/Electrostatic photographic method Dry Dual Component 70 sheets (Letter, 20 lb, 75 g/m2) Std. 1,550 (Large-capacity tray) + 550-sheets + 50-sheets bypass Max. 6,250 sheets (20 lb, 75 g/m2) with option Power Requirements Power Consumption Dimensions (W x D x H)*1
(Excluding optional equipment)
Network Printer Printer Interface Standard Network Printing Printing Speed Paper Size Printing Resolution Printer Memory Ethernet 10Base-T/100Base-TX, Bi-directional Parallel (IEEE1284) Windows GDI up to 35 ppm Ledger Invoice up to 1,200 dpi equivalent x 600 dpi (PCL, PS), up to 600 dpi x 600 dpi (GDI) 20MB
Page Description Language (option) PCL 5e Emulation, PCL 6 Emulation, PostScript 3 Compatible Operating Systems Windows XP/2000/98/Me, Windows NT 4.0, MacOS 8.6-10.2 (PS only) Network Protocol Network Scanner Interface Scanning Size Scanning Resolution Data Format TCP/IP, IPX/SPX (PCL, PS), EtherTalk (PS only), IPP (PCL, PS) Ethernet 10Base-T/100Base-TX Ledger Invoice 150 dpi x 150 dpi, 300 dpi x 300 dpi, 600 dpi x 600 dpi TIFF, PDF Notes Network Scanner (Option)
AC 120 V, 60 Hz, 12 A Max.: Less than 1.5 kW Sleep mode: Approx. 20 Wh 23.6" x 29.8" x 35.4" (600 x 758 x 900 mm)
(Main unit with Inverting Automatic Document Feeder)
Weight (Excluding optional equipment)*1 Approx. 283 lb (128.5 kg) Digital Copier Functions (Standard) Warm-up Time First Copy Time Resolution Gray Scale Multi Copy Speed*2 Maximum Original Size Copy Size Copy Ratio Less than 30 sec. Less than 5.8 sec. (Letter) up to 600 dpi 256 steps up to 35 cpm Ledger Ledger Invoice Enlargement (fixed) 200%, 155%, 129%, 121% Reduction (fixed) 79%, 77%, 65%, 61%, 50% Zoom (variable) Multiple Copy Exposure Controller Sort Memory Standard Optional 25~400% (in 1% increments) 1 to 999, Automatic reset to 1 Text, Text / Photo, Photo Uses JBIG Compression 32MB (Image Memory) Base Image Memory (32MB) plus 16MB / 64MB / 128 MB (Max. 160MB) and optional 12GB HDD
G3 Fax Functions (Option) Compatibility Modem Speed Coding Scheme Transmission Speed*3 Scanning Speed*4 Scanning Resolution ITU-T Group 3, ECM 33.62.4 kbps with automatic fallback JBIG / MMR / MR / MH Less than 3 sec. 0.7 sec. (Letter portrait in Standard or Fine mode with ADF) Standard: 203 dpi x 98 lpi (8 dots/mm x 3.85 lines/mm) Fine: 203 dpi x 196 lpi (8 dots/mm x 7.7lines/mm) Super Fine: 406 dpi x 391 lpi (16 dots/mm x 15.4 lines/mm) 600 dpi: 600 dpi x 600 dpi Effective Scanning Width Recording Resolution Standard Memory Optional Memory No. of Auto Dialers Compatibility Communication Protocol Network Connectivity Data Format Ledger (11 1/2") 600 x 600 dpi 2MB (Approx. 120 pages)*5 Base memory plus 4MB (240 pages)*5 / 8MB (480 pages)*(Max. 1,000 with optional HDD) IETF RFC 2305, ITU-T T.37 TCP/IP, SMTP, POP3, MIME Ethernet 10Base-T/100Base-TX (IEEE802.3) TIFF (Profile S/F/J), PDF
*1 Dimensions and weight are approximate. *2 Speeds are contingent upon applications, machine configuration, and status. Individual speeds may vary. *3 Transmission time applies to memory transmission of text data using only ITU-T Image No.1 between the same models at maximum modem speed. Transmission time may vary in actual usage. Usually public telephone lines can only support communication speeds of 28.8 Kbps or lower. Via PBX, transmission speed may fall back to a lower speed. *4 Scanning speed applies to the feeding process from the top to the end of a single page test chart. The time for the feeding process does not include the time that it takes for the top edge of the page to reach the scanning point and page ejection. Time for entire storing process is not applied. *5 Based on ITU-T Image No.1 scanned in Standard mode. Design and specifications are subject to change without notice. Not all options may be available at the time of notification. Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation. Adobe, PostScript, PostScript 3, PDF and PostScript logos are registered trademarks of Adobe Systems, Inc. PCL is a registered trademark of Hewlett-Packard. MetaConsole is a trademark of Netaphor Software Inc. OneRIP is a registered trademark of Advanced Hi-Tech Corporation (AHT). WORKiO is a registered trademark of Matsushita Electric Industrial Co., Ltd. All other brand or product names are the property of their respective holders.
Scan-to-Email (Option) / Internet Fax (Option)
ISO 9001 Quality Management System
Our business processes which produce document, information and network products, from manufacturing to marketing, conform to ISO9001 Quality Management Systems standard. Design, development, manufacture, installation, repair and maintenance of document, information and network products, their associated devices and consumables. In addition, the plants outside Japan have acquired ISO 9001 certification.
As an Energy Star partner, Panasonic has determined that this product meets the Energy Star guidelines for energy efficiency.
Panasonic Digital Document Company Unit of Matsushita Electric Corporation of America Two Panasonic Way, Secaucus, NJ 07094 For a local dealer, please call 1-800-742-8086 http://www.panasonic.com/office
Changing the Initial Machine Modes Copy, Printer, Scanner (Option) and Fax/Internet Fax (Option) (See pages 58-73)
Accessories Components (See page 75) 2-Bin Finisher (DA-FS600) 2-Bin Saddle-Stitch Finisher (DA-FS605) 2-Bin Finisher (DA-FS330) 1-Bin Saddle-Stitch Finisher (DA-FS355A) (See pages 76, 77) (See pages 78-81) Network Scanner (DA-NS600)
(See pages 82, 83) (See pages 84, 85)
Replacing the Battery
Specifications, Options and Supplies and Index (See pages 86-94)
The following Symbols/Icons are used throughout this operating instructions manual.
Place original(s) on the ADF
Getting to know your machine Before starting
Place original(s) on the Platen (Book) When making copies Place original on the Platen (Sheet)
Press any Hard Key on the control panel or touch any Button on the touch panel display
Press Hard Key Touch any Button
When setting the machine modes
Input numbers Number of Copies, etc. Input text with a keyboard
Options (ex.: Network Scanner) When scanning document(s)
Options (ex.: 1-Bin Finisher)
Go to next step Problem solving Go to next step (below) 5
Setting any function(s) if required Others (Specifications, Index)
Table of Contents
Useful Office Functions.... 2 DP-3520/4520/6020 Operating Instructions.... 2 Operating Instructions Outline.... 3 Symbols/Icons.... 4 Precautions.... 7 Operation Chart..... 10 Quick Operation Chart... 10 Problem Solving....11
Energy Star.... 26 Control Panel.... 27 Touch Panel Display.... 28
Basic Menu.... 30 Copying the Same Size Originals (1:1)... 30 Using the ADF... 30 Copying on Heavy Paper (Post Cards, etc.) (35 lb max.).. 30 Position of the original(s)... 31 Copying with Preset Ratios (Reduction/Enlargement).. 32 Proof Copying... 32 Tandem/Remote Copying... 32 Tandem/Remote Copy Settings (Registration 1).. 34 Tandem/Remote Copy Settings (Registration 2).. 34 Tandem/Remote Copy Settings (Editing).. 34 Tandem/Remote Copy Settings (Deleting)... 34 Job Queue.... 36 Completion Notice... 36 2-Sided/Original Copy.... 38 1-Sided 2-Sided, 2-Sided 1-Sided, 2-Sided 2-Sided Copy. 38 Book 2-Sided Copy... Page Copy... 40 N in 1 Copy.... 40 Booklet Copy... 40 Multi-Size Feeding.... 42 Job Build and SADF Mode.... 42 Sort/Finish..... 44 When using Sort Mode... 44 Zoom/Effects.... 46 Zoom.... 46 Auto Zoom.... 46 Edge.... 46 Book.... 46 Margin... 48 Centering.... 48 Image Repeat.... 48 Inverse.... 48 Stamping (Page Numbering)... 50 Stamping (Date Stamp).... 50 Stamping (Issue Number Stamping).. 50 Insertion/Overlay..... 52 Cover.... 52 Page Insertion... 52 OHP Interleaving.... 52 Presentation.... 52
(See pages 46-51)
(See pages 52-55)
(See pages 54 and 55) ex: DA-FS330
Removing a Misfed Paper (See pages 16-25)
Adding Paper (See pages 10 and 12) Replacing Toner Bottle (See page 12) Replacing Toner Waste Container (Call your Service provider)
User Error Code (See page 17) Machine Error Code (Call your Service provider)
Replacing Staple Cartridge (See pages 14-17) When the optional Finisher is installed.
Adding Paper (1550-Sheet Paper Tray 1) 3
Paper Weight: 16-24 lb Paper Capacity: 1550 Sheets (20 lb)
Adding Paper (3000-Sheet Large Capacity Paper Tray (LCT) (Option)) 1 2
Paper Feed Tray
When using paper with one side already printed, load the paper with the unprinted side facing upward. After tray stops, place paper neatly on the tray. Letter size only (Portrait).
Do not touch the tray while it is moving.
Letter-R/Legal size is available when
optional Letter-R/Legal Size LCT Adapter (DA-TK31) is installed.
Replacing Toner Bottle/Replacing Toner Waste Container 1
Replace Toner Bottle
Replace Toner Waste Container
(Call your Service provider)
3 Overfill Indicator
Paper Capacity: 3000 Sheets (20 lb)
New Toner Bottle
Empty Toner Bottle
10 to 15 times Shake the new Toner Bottle well to loosen the contents.
(ATTENTION) For optimum copy quality it is recommended that only Panasonic Brand toner is used in the copier. Store toner in a cool dark area with low humidity. Do not unseal the toner bottle unless you are ready to use it.
Problem Solving (Common operation)
Replacing the Staple Cartridge (Common operation) (When optional Finisher is installed.)
Replace the Staples Case as following procedures. For 1-Bin Saddle-Stitch Finisher (DA-FS355A) (See page 16)
2-Bin Finisher (DA-FS330) 1
2-Bin Finisher (DA-FS600)/2 Bin Saddle-Stich Finisher (DA-FS605) 3
When supplying the Saddle Sticher Unit with staples (DA-FS605 only) 2 3
Lower Front Cover
Stitcher Unit Green Handle
Check the operation
Number of Copies (Max. 999)
When the Staple is jammed The following message will be displayed on the Touch Panel Display: "Can Not Complete Confirm Staple Unit"
Copying the Same Size Originals (1:1)
Copy size is automatically selected.
If original size is not detected
Position of the original(s)
On the i-ADF On the Platen
Note 1) Once after setting originals , pressing Start button, do not press originals as it may cause original jam. Note 2) When originals with clipped or stapled, take off clips or staples, then set originals neat.
Using the ADF
Originals that cannot be used Post Cards, Drawing Papers, Transparencies, Labelling Papers, Heavyweight Papers, Thin Art Papers, Film Thermal Papers Inappropriate Originals Paper with a smooth surface such as glossy and coated papers Transparencies Originals with a Lead Edge that is ripped, creased, folded, punched, or glued. Mixed width size Originals (except a combination of Ledger and Letter) Paste-ups Pressure sensitive or carbon backed papers Paper with excessive curl Stapled originals Freshly printed copies from a laser printer Originals with fresh White-Out (Liquid paper correction fluid)
Upper Limit Indicator
ADF Tray Original Guides Adjust to the originals width Set the originals up to the upper limit indicator
During the copy operation and after making copies, the fan motor may start spinning. This is a normal operation and is used to cool down the copier.
Adjust the Manual Exposure or
Mainly Text Text and Photo combined Mainly Photo Number of Copies (Max. 999)
When copying a thick Booklet, open the ADF and verify that the ADF Hinge was returned to original position if the rear of the ADF was raised.
Copying on Heavy Paper (Post Cards, etc.) (35 lb max.)
Load paper on the Sheet Bypass
2 Select Sheet Bypass and 4 touch the Size Change button
3 Select Heavy Paper
Memory Capacity: If the memory becomes full during original scanning, the message Cannot Complete / Job Exceeds Memory Capacity will be displayed on the LCD. If this occurs, follow the instructions on the LCD. When additional memory is required, consult with an authorized service provider.
Select type of Original(s)
Copying with Preset Ratios (Reduction/Enlargement)
Letter or Ledger
Allows you to make one proof set, before proceeding to copy a large multi-set with various settings. 100
Proof copy Multi copy
Select Copy Job settings
Requires installation of optional Hard Disk Drive (DAHD60), Network setup (See pages 65 and 72) and Parameter registration. (See page 34)
This copier Other copier
50 copies 50 copies
If the desired copy size is different from the paper size loaded in the Paper Tray, use Sheet Bypass. (See page 10) The selected Remote printing copier, must be either DP-3510 / 3520 / 4510 / 4520 / 6010 / 6020. For the copier to function as a Remote/Tandem Copier it has to be setup in advance.
3 The Correct ratio is automatically selected.
Reduction and enlargement ratios (%) ORIGINAL SIZE Ledger Ledger 100 Legal 121 Letter-R 129 Invoice-R 200 COPY SIZE Legal Letter-R Invoice-R 129 100
If the Proof copy is OK, the remaining number of sets will be printed. or Number of Copies (Max. 999) If the Proof Copy is NG, again, place the originals back on the ADF (or Platen) and try again.
Press the PROOF SET button again if the Proof Copying mode was reset.
Tandem/Remote Copy Settings (Registration 1)
Input the Key Operator ID Code if required. 1
Input ID Code (4-digit)
By default, the key name will
Enter the key name (up to 15 characters).
be up to 15 characters of the stations name.
Tandem/Remote Copy Settings (Registration 2)
If installing the machine on a Network with a different subnet mask, you must first register it before being able to use the Tandem/Remote Copying function.
Scroll to 05/05
IP Address Ex: 220.127.116.11 When entering a 1 or 2-digit number segment, add 00 or 0 in front of the number, to scroll to the next segment of numbers or press the key to enter a period after the number.
Tandem/Remote Copy Settings (Editing)
To edit the registered machines settings (IP Address, machine name or key name).
Open the screen 05/05 same as the Registration procedures above.
Tandem/Remote Copy Settings (Deleting)
To delete the registered machine.
Open the screen 05/05, same as the Registration procedures above.
Scroll to 08/09 Machine name (up to 15 characters)
The Digital Skyshot has 2 modes ( copy or copy ). The default setting of Digital Skyshot Mode is Freeshp. Before using this mode, select each setting by using the Function setting.
Set original on Platen Glass
No : None Freeshp (Free shape) : Copy is made with a slant. copy Parallel : Copy is made in a straight line. (within 5 degrees) (See page 61)
(See page 64) An incorrect exposure may occur when there is a black line at the edge of the original or an image which the copier interprets as a black pattern in the skyshot mode.
Sleep Mode/Shutdown Mode and timer setup is performed in the key operator mode.
Select Function or
Scanning is completed
This mode can interrupt other copy jobs while making copies/printing. Other Job set
Other Job is completed
Manual Skyshot Mode
Set 07 Manual Skyshot Mode in Copier Settings first. (See page 61)
1 Platen UpperLeft Corner
Default M1/M2 size can be changed
in the Function mode. (See page 67)
If using ADF, place originals in the center position of ADF Tray. The ADF can feed only 14 - 28 lb plain paper. When using the manual skyshot mode, the M1 and M2 are turned On and other job requiring memory cannot be used. An incorrect position detection of the original may occur when a strong light shines onto the glass during skyshot mode.
Job Waiting List can be confirmed with Job Queue. (See page 36)
Using Function Modes to Change the Initial Copy Modes
Options General Settings Copier Settings Printer Settings Fax/Email Settings Scanner Settings
Input Identification (Key Operator ID) Code
General Settings for Key Operator
Copier Settings for Key Operator
Printer Settings for Key Operator
Fax/Email Settings for Key Operator
Changing the Initial Machine Modes Power On Default mode, Manually add toner, etc. (See page 60) For Key Operator: Paper size, Finisher bin/Staple mode, Department Counter, Network TCP/IP settings, etc. (See pages 64-66)
Select the desired Function Mode
Select the desired Function
Please refer to the appropriate operating instructions manual for function settings on options.
Changing the Initial Copy Modes Default function of each copy mode (See pages 61) For Key Operator: Paper size priority, Original mode, Contrast, Job Build and SADF mode, Original size of Manual Skyshot mode, etc. (See pages 67 and 68)
Changing the Initial Printer Modes Default function of each print mode (See page 63) For Key Operator: Job completion time, Page protection, Error page print, Spool function, PS configuration, Font list print, Mailbox data holding, etc. (See page 69)
<When Optional accessories are installed> Scanner Settings:
Changing the Initial Scanner Modes Original mode, Compression mode, Resolution, Job Build and SADF mode, Address book, etc. (See page 62) The Completion Notice will work for other modes (i.e. Copy, etc.) even if the Scanner Option not installed.
Changing the Initial Fax/Email (i-FAX) Modes Refer to Operating Instructions (For Fax/Internet Fax function).
When the Key Operator Mode:
Setting the Function Parameter
Identification Code (4-digit)
Set the desired Function Parameter(s).
Screen No. Modes 00 Power On Default Mode 01 Manual Add Toner 02 Sort Memory Status 01/Departmental Counter Function Selects mode. COPY, PRINTER, SCANNER, FAX Adds toner manually. Off, On Indicates the sorting memory status. Off, On Indicates the department counter. Initial Setting COPY Off Off Consult with an authorized service provider
04 Key Operator Mode
Input the Key Operator ID Code.
When the optional Network Scaner Module/Fax
Communication Board is installed.
Screen No. Modes 00 Margin Value Default 01 Edge Value Default 02 Book Value Default 01/Margin Reduction Def. 04 2-Sided Mode Default 05 Reduce N in 1 For Space 06 Digital Skyshot Mode 02/Manual Skyshot Mode 08 Auto Contrast Adjust Function Selects the margin shift value. 5 mm, 10 mm, 15 mm, 20 mm Selects the edge width. 5 mm, 10 mm, 15 mm, 20 mm Selects the book void width. 15 mm, 20 mm, 25 mm, 30 mm Selects the reduction ratio in margin mode. No, Yes Function sets the duplex priority mode. No, 1 to 2, 2 to 2, B to 2 (B: Book) Selects whether to disable edge deletion. No, Yes Enables or disables the use of Skyshot mode. No, Freeshp (Freeshape), Parallel Initial Setting 10 mm 5 mm 20 mm No No No Freeshp
Enables or disables the use of Manual Skyshot. Off Off, M1, On, M2, On, M1, M2, On Automatically adjusts the copy density for text and photographic originals. No, Yes Selects the N in 1 default mode. 2 in 1, 4 in 1, 6 in 1 Selects the booklet magnification. 100 %, Reduce Selects the sort mode. Non-Sort, Sort, Stplsort (Staple-Sort), Sftgroup (Shift-Group) Selects the sort mode. Non-Sort, Sort, Stplsort (Staple-Sort), Sftgroup (Shift-Group) Selects the staple position. Landscap (Landscape), Portrait, Center Selects the stamping mode. Page, Date, Issue Selects the page numbering style. -n-, n/m Enables the hole punch mode. Off, On Selects the dotted line. None, Print Input Key Operator ID code. Yes
Portrait On Off Long 600 x 11 10.00 012.CR Off
For Key Operator
Screen No. Modes 00 Paper Size Function Sets the paper size of each paper drawer. Ledger, Legal, Letter, Letter-R, Invoice, A3, B4, A4, A4-R, B5, B5-R, A5, 8 x 13, 8.5 x 13, FLS2, AUTO Selects the Control Panel reset time. None, 30 sec., 1 min., 2 min., 3 min., 4 min. Sets the Energy Saver mode and time. 1-240 minutes Sets the Sleep/Shutdown timer. None, 1-240 minutes Initial Setting Consult with an authorised service dealer 1 min.
01 Auto Reset Time 01/Power Save Mode Timer 03 Sleep/Shutdown Timer
minutes (DP-4520/6020) 15 minutes (DP-3520) English None
04 Language Default 05 Special Paper Tray 1
Selects the message language of the display. Sets the paper drawer for special paper (ex: coloured). None, Tray 1, Tray 2, Tray 3, Tray 4, Bypass, LCT Sets the paper drawer for special paper (ex: coloured). None, Tray 1, Tray 2, Tray 3, Tray 4, Bypass, LCT Sets the output bin. Upper, Bottom Sets the output bin. Upper, Bottom Sets the output bin. Upper, Bottom Copier will automatically rotate image and print when selected paper tray is empty. Off, On Beep sounds when touching the panel. Off, Soft, Loud
06 Special Paper Tray 2
07 COPY Output Bin 08 PRINTER Output Bin 09 FAX/EMAIL Output Bin 10 Auto Paper Out Rotate
Upper Bottom Bottom Off
11 TCH Panel Beep Sound 03/Original Set Beep Sound 13 Orig. Set In ADF Sound 14 Dept. Counter Mode
Beep sounds when original is set on the Platen. No No, Yes Beep sounds when original is set into the ADF. No, Yes Monitors copy usage of each department. (1) Print usage of each department (2) Print limit of each department (3) ID code of each department Yes Consult with an authorised service dealer
The Key Operator ID Code is required before any changes can be made to items on this page. Only 3 Paper Sizes (Letter, A4, B5) will be available when selecting Tray 1. AUTO Paper Size can be selected for Tray 2.
Screen No. Modes 15 Fold Position (A3/LDR) 16 Fold Position (B4) 04/Fold Position (A4/LTR-R) 19 Language Sel. Priority 20 Date Time Setting 21 Weekly Timer 22 DHCP Default 23 TCP/IP Address 24 TCP/IP Subnet Mask 25 TCP/IP Default Gateway 26 DNS Server Address 06/Hard Disk Format 28 Hard Disk Error Check -4.0 - +4.0 mm Selects the display message language. Off, On Sets date time registered. Month, Day, Year, Time Sets the weekly On/Off timer. Sets the DHCP. No, Yes Sets user IP address. 3 digits x 4 Sets the subnet mask. 3 digits x 4 Sets the gateway address. 3 digits x 4 Sets the DNS server. No, Yes Selects the hard disk format. Stop, Start Selects the hard disk error check. Stop, Start No Yes 0.0 mm Off -4.0 - +4.0 mm -4.0 - +4.0 mm Function Initial Setting 0.0 mm 0.0 mm
The Key Operator ID Code is required before any changes can be made to items on this page. When Functions No. 22 to 26 are set, cycle the power by turning the Power Switch on the Left side of the machine OFF and ON. Not required in copying mode, but needed when installing options with advanced functions (See page 75).
10 Delete Mailbox Data 11 Print Queue Delete 12 AppleTalk Zone Name 13 NetWare
The Key Operator ID Code is required before any changes can be made to items on this page. Functions No. 09 and 10 are available when the optional Hard Disk Drive (DA-HD60) is installed. When Function No. 12 is set, cycle the power by turning the Power Switch on the Left Side of the machine OFF and ON.
Changing the Auto Contrast Setting
You can select whether to automatically adjust the copying density for Text and Photo originals.
Scroll to 02/04
Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter-R, Legal and Ledger Size paper.
Paper Tray Tray 2 only Only 3 Paper Sizes (Letter, A4, and B5) will be available when selecting Tray 1. Paper Size
Key Operator can administer the On/Off weekly timers.
Input time Ex.: 0800
ID Code (4-digit)
Pull out the Paper Tray
Adjust the Paper Guides ( a / b )
Note: It is recommended that the paper guide ( b ) is fixed in place with screws. Consult an authorized service provider for details on how to fasten the guide.
Change the Paper Size Indicator For Tray 2:
Change the position of the Paper Size Indicator to display and to automatically select the paper size loaded in the tray.
ID Code (4-digit) Scroll to 05/09
Input time Ex.: 1700
The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 300) Contact your authorized service provider to enable the Department Counter feature.
6 For Total Counter
For Identification Code
Displays the sum of all the active department counters.
Prints all the active department counters.
Select Page Select Department
ID Code (8-digit)
To clear the total counter, touch the INPUT button, enter 0 and touch the OK button.
6 Input a Department Name (up to 25
characters) using the Keyboard and touch the OK button. (See page 35, How to use the Keyboard)
When the Parameter 23 DHCP Default is set to No, the Key Operator must administer the Network settings manually.
Scroll to 05/09 or Scroll to 06/09
Input an IP Address Ex.: 192.168.1.100 When entering a 1 or 2-digit number segment, add 00 or 0 in front of the number, to scroll to the next segment of numbers or press the key to enter a period after the number.
ID Code (4-digit) For Department Counter For Maximum Prints Scroll to 03/09
Clear the counter (8-digit) to 0
Maximum Number of Copies (8-digit)
Turn the Power Switch on the Left Side of the machine OFF and ON.
Combined Function Table
2-SIDED/ORIG. COPY SORT/ FINISH ZOOM/ EFFECTS INSERTION/ OVERLAY Others
Book Page N in 1 Booklet Multi-Size Feeding Job Build and SADF Sort Shift-Sort Rotate-Sort Staple-Sort Shift-Group Rotate-Group Non-Sort Punch Zoom Auto Zoom Edge Book Margin Stamping Image Repeat Centering Inverse Cover Insertion OHP Interleaving Presentation Overlay Form Overlay File Edit Interrupt Proof Copy Tandem Copy Concurrent Copying Manual Skyshot Digital Skyshot
When the optional Hard Disk Drive Unit (DA-HD60) is not installed, the operation result of the Combined Function will change to an "R".
A registered image cannot be availed in selected copy function of above gray highlighted.
: Possible Combined Functions. : Possible Combined Functions without full size copy ratio. : Unavailable Combined Functions. A : Next Selection is Carried Out. R : When the same function is selected twice, the second selection is ignored. : Functional combination that cannot be performed. : Posssible on all models except the DA-FS330. Multi-size Feeding with any shift function is not possible.
File Edit Interrupt Proof Copy Tandem Copy Concurrent Copying Manual Skyshot Digital Skyshot
Book Page N in 1 Booklet Multi-Size Feeding Job Build and SADF Sort Shift-Sort Rotate-Sort Staple-Sort Shift-Group Rotate-Group Non-Sort Punch Zoom Auto Zoom Edge Book Margin Stamping Image Repeat Centering Inverse Cover Insertion OHP Interleaving Presentation Overlay Form Overlay
The DP-3520/4520/6020 is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
2-Bin Finisher (DA-FS330 for DP-3520) (DA-FS600 for DP-4520/6020) (See pages 44 and 76)
Image Memory (DA-SM16B/64B/28B) 16/64/128 MB To increase the memory capacity for electronic sorting. Hard Disk Drive (HDD) Unit (DA-HD60) For PS Printing (for Fonts) Security Print/Mailbox Tandem copy/Concurrent copy I-FAX without mail server 1,000 Station Address Book Print Job Spooling OneRIP Account Management Expansion Board (DA-EM600) Expansion F-ROM (8 MB) Network Scanner Module (DA-NS600) Printer Controller Module (DA-PC601) Printer Controller for PCL6 Multi Page Description Language Controller Module (DA-MC601) Printer Controller for PS/PCL6
1-Bin Saddle-Stitch Finisher
(DA-FS355A for DP-3520/4520) (See pages 44 and 76) 2-Bin Saddle-Stitch Finisher (DA-FS605 for DP-4520/6020) (See pages 44 and 76) Punch Unit for DA-FS600/605 (DA-SP31) (See page 76) Punch Unit for DA-FS355 (DA-SP41) (See page 76) Exit Tray (DA-XT600)
System Console (DA-DS601/602) To increase the paper feed sources and capacity. DA-DS601: Paper Tray x 1 DA-DS602: Paper Tray x 2 (550 sheets)
Fax Communication Board (DA-FG600) 3000-Sheet Tray (LCT) (DA-MA301) To increase the paper feed capacity. (3000 sheets) Letter-R/Legal Size Adaptor for LCT (DA-TK31) Internet Fax/E-Mail Module (DA-NF600)
PCL6 is a Page Description Language of the Hewlett-Packard Company.
PS is a Page Description Language of the Adobe Corporation. Contact your authorized service provider for details on combinations of options.
Finisher 1. Components
Punch Unit (Option: DA-SP31) For punching 3 holes on copies. 1 Bin 2 Bin Saddle Stitcher Tray When using the Booklet copy mode (see page 40).
Saddle Stitcher Tray (DA-FS605) When using the Booklet copy mode (see page 40).
Punch Unit (Option: DA-SP41) For punching 3 holes on copies.
5. Dispose the Punch Hole Residue
DA-FS600/FS605 with optional Punch Unit (DA-SP31)
Punch Unit Front Cover Punch Hole Residue Container
DA-FS355A with optional Punch Unit (DA-SP41)
1 Bin 2 Bin Letter size only Electronic Shift Stapling (See page 44)
3. Replacing the Staple Cartridge
(See pages 14-17)
4. Bin Capacity
(See pages 88 and 89)
Punch Unit Front Cover
Return the finisher to original position.
Dispose the punch hole residue.
Document Scanning/Address Book
When Panasonic Document Management System (PDMS) is installed and configured on your PC, document(s) can be scanned from the DP-3520/4520/6020 to PC.
Original Size if original size is not shown
Adding your PC IP Address
If the Scanner Configration is not set with the Panasonic Communications Utility of PDMS software (refer to PDMS CD-ROM), input your PC IP Addresses from the copier's Touch Panel.
Scroll to 02/02
Key Name (Max. 15 characters) Ex.: PC Name Document Save Docu. Retrieve
Add the IP Address to Favorites or
For PC For DD Server refer to optional DD Server (DAWS20)
Enlargement Ratios Reduction Ratios Paper Feed Paper Weight Quantity Selector Electrical Consumption Energy Consumption Dimensions (W D H) Weight Operating Environment
Specifications are subject to change without notice. Modes Normal Operation Power Consumption Approximately 160 Wh (3520) Approximately 210 Wh (4520) Approximately 240 Wh (6020) Approximately 170 Wh (4520) Approximately 180 Wh (6020) Approximately 20 Wh Approximately 4 Wh Warm Up Time N/A Min. 30 sec. recovery (4520/6020) 30 sec. recovery 180 sec. recovery 30 sec. recovery 180 sec. recovery (3520) (4520/6020) (3520) (4520/6020)
Power Saver Mode Sleep Mode Shutdown Mode
Tray Capacity Paper Size Paper Weight Electrical Requirements Dimensions (W D H) Weight Maximum 70 sheets (20 lb: 75 g/m2) Invoice/Letter/Legal/Ledger lb (50 - 105 g/m2)/1-sided lb (64 - 105 g/m2)/2-sided Supplied from copier 23.6 23.0 5.4 in (138 mm) 32 lb (14.5 kg)
System Console 1 (DA-DS601)
Combination Paper Size Paper Weight Paper Capacity Electrical Requirements Dimensions (W D H) Weight Applicable Models Paper Tray 1 Storage Tray 1 Invoice/Letter/Letter-R/Legal/Ledger lb (60 - 90 g/m2) Maximum 550 sheets 1: 20 lb (75 g/m2) Supplied from copier 23.6 28.7 11.4 in (290 mm) 63.5 lb (28.8 kg) DP-3520/4520/6020
System Console 2 (DA-DS602)
Combination Paper Size Paper Weight Paper Capacity Electrical Requirements Dimensions (W D H) Weight Applicable Models Paper Tray 2 Invoice/Letter/Letter-R/Legal/Ledger lb (60 - 90 g/m2) Maximum 550 sheets 2: 20 lb (75 g/m2) Supplied from copier 23.6 28.7 11.4 in (290 mm) 66.2 lb (30 kg) DP-3520/4520/6020
3000-Sheet Tray (LCT) (DA-MA301)
Paper Size Paper Weight Paper Capacity Electrical Requirements Dimensions (W D H) Weight Applicable Models Letter (Letter-R/Legal with optional DA-TK31) lb (60 - 90 g/m2) Maximum 3000 sheets 20 lb (75 g/m2) Supplied from copier 11.7 17.5 19.9 in (505 mm) 27.2 lb (12.3kg) DP-3520/4520/6020
Letter-R/Legal Size Adaptor for LCT (DA-TK31)
Paper Size Paper Weight Paper Capacity Applicable Model Letter-R/Legal 20 lb (75 g/m2) Letter-R : Maximum 2500 sheets Legal : Maximum 1500 sheets DA-MA301
2-Bin Finisher (DA-FS600)
Mode 1 Bin and 2 Bin Paper Size 1 Bin and 2 Bin Paper Weight Paper Capacity 1 Bin and 2 Bin Staple Paper Size Paper Weight Capacity Point Electrical Requirements Dimensions (W D H) Weight Applicable Models Letter/Letter-R/legal/Ledger 17 - 21 lb (64 - 80 g/m2) 2-50 sheets: Letter (20 lb: 75 g/m2) 2-30 sheets: Letter-R/Legal/Ledger (20 lb: 75 g/m2) Rear 1/Front 1/Middle 2-Point Staple Supplied from copier 26.4 24.2 59.1 in (1500 mm) 76 lb (34.5 kg) DP-4520/6020 Maximum: 1000 sheets / 30 set (Stapling mode) Invoice/Letter/Letter-R/Legal/Ledger 16 - 35 lb (60 - 135 g/m2): Non-sort mode Non-sort/Sort/Staple
Punch Unit (DA-SP41)
Paper Size Paper Weight Applicable Model
Specifications are subject to change without notice.
Letter/Ledger : 3-hole Letter-R/Legal : 2-hole 17 - 35 lb (64 - 133 g/m2) DA-FS355A
Options and Supplies
Part Name Plain Stand Plain Stand (Short) System Console 1 System Console 2 3000-Sheet Tray (LCT) 2-Bin Finisher 2-Bin Saddle-Stitch Finisher 2-Bin Finisher 1-Bin Saddle-Stitch Finisher Punch Unit for DA-FS600/605 Punch Unit for DA-FS355A Exit Tray Letter-R/Legal Size Adaptor for DA-MA301 Image Memory (16 MB) Image Memory (64 MB) Image Memory (128 MB) Expansion Flash Memory Card, 4 MB Expansion Flash Memory Card, 8 MB Hard Disk Drive Printer Controller Module Network Scanner Module Expansion Board Multi Page Desription language Controller Module Internet Fax/E-Mail Module Fax Communication Board DD Server Software Accounting Software Document Distribution System Part No. DA-D351 DA-D352 DA-DS601 DA-DS602 DA-MA301 DA-FS600 DA-FS605 DA-FS330 DA-FS355A DA-SP31 DA-SP41 DA-XT600 DA-TK31 DA-SM16B DA-SM64B DA-SM28B UE-410047 UE-410048 DA-HD60 DA-PC601 DA-NS600 DA-EM600 DA-MC601 DA-NF600 DA-FG600 DA-WS20 DA-WA10 DA-WR10 For USA/Canada only For USA/Canada only 550 Sheet Paper Tray Sheet Paper Tray Sheet Paper Tray For DP-4520/6020 For DP-4520/6020 For DP-3520 For DP-3520/4520 For DP-4520/6020 DA-FS355A for DP-3520/4520 For DP-3520/4520/6020 For DP-3520/4520/6020 For Electronic Sorting For Electronic Sorting For Electronic Sorting Additional Page Memory for Fax Communication Board (DA-FG600) Additional Page Memory for Fax Communication Board (DA-FG600) For DP-3520/4520/6020 Printer Controller for PCL6 Network Scanner F-ROM 8MB Printer Controller for PCL6/PS3 Internet Fax/E-Mail communication G3 Fax/Tel communication For DD Server function For Accounting function For Document Distribution function Remarks
PS3 is a Page Description Language of the Adobe System Company.
Part Name Staple Cartridge Staple Cartridge Staple Cartridge Staple Cartridge Toner Toner Part No. FQ-SS66 FQ-SS50 DQ-SS35 FQ-SS32 DQ-TU241G DQ-TU351G Remarks Staple Cartridge Refills (3) for DA-FS600/605 Staple Cartridge Refills (3) for DA-FS605 (Saddle-Stitch) Staple Cartridge Refills (3) for DA-FS355A Staple Cartridge Refills (3) for DA-FS330 Toner for DP-3520/4520 Toner for DP-6020
1 21... 11... 21... 38 2PAGE.. 40 2-Sided/Original Copy.. 11
DATA STAMP.. 50 Delete printing job(s)... 36 Department Counter.. 73
Accessories... 75 ACTIVE LED (GREEN).. 27 Add Paper Indicator.. 82 Add Staples: 1-Bin Saddle-Stich Finisher (DA-FS355A). 16 2-Bin Finisher (DA-FS330). 14 2-Bin Finisher (DA-FS600)/ 2-Bin Saddle-Stich Finisher (DA-FS605).. 14 Add Toner: Replace Toner Bottle.. 12 Adding Paper (1550-Sheet Paper Tray 1). 12 Adding Paper (3000 Sheet Large Capacity Paper Tray (LCT) (Option)).. 12 Adding Paper (550-Sheet Paper Tray2-4). 10 Adding Paper (Sheet Bypass).. 10 Additional Memory (Image Memory).. 75 ADF.... 30 Adjust the Manual Exposure.. 11, 31 ALARM LED (RED)... 27 AUTO ZOOM.. 46 E#-## indicator.. 82 EDGE... 46 Energy Save Mode Notice.. 8 ENERGY SAVER Key.. 27 Energy Saver Key Flash (or Light).. 82 ERASE.. 55
NR-1201 KLV-30XBR900 Nokia 6822 FI873 MS5027LE Clock Start AX4PER Premicell Traffic K7S41 G 1830 DCS-3110 211 104 TXT RMP-5 Browser IC-706amkiig MO201 Display Black IC-F43GT KX-TD7690 CS-PA12GKD KRC-677R PC-50 DCR-TRV250 VC-H220 DMR-EZ45VEB SE568 305HR KX-TG6473 Sable 1997 WIM 2120 3386R L1753T-SF Inkjet 1000 LAC-M7600 J1000 TC4100 DV250-NZ Belkin N1 S-DV424 EP608 WV-CP150 RA-1312 HT362ST Samsung I780 Favorit Elastikband-druckerfubes Dale II KD-R401E WR 360 ENL6298X1 ESF103 1 LN26B350f1 VSX-AX2as-S YP-U5JAW SKS-HT520 KDL-40XBR2 RM-AV3000 Yahtzee DAV-DZ660 AV-28BD5eps-av-28bd5 E1150 Supergliss Fujifilm J120 Explore Elite Review CCD-TRV208E TX100 PN 8388 VH196D KDL-46EX401 LE40A436 GEM S ESF43011 CLD-S104 NN-SD767 MCC2580E-M CGX23 EB-X72 Garageband 2 Matica 500 KDL-26S2030 DG834GTB PS50A756 WF-T1022TP Desktop PC HD710 DTH250E FWM139 LC240CP Kodak M320 TDA2040 DH400P RDA-7 SGH-T229 Kitty 2300N
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101