Page 1 of 2

home | products |web boards| faq | galleries | contact | about
DVDlab Home Screenshots Encoder Banners DVDlab PRO Home Screenshots History DVD-9 DL Home Resources Tips & Tricks Help Help Help Help Help FAQ History DVD Tools Timecode calc Re-Aspect Articles H. Theater DOF Machine 3D Video Photo-Brush Start here Real-Draw Start here CompactDraw Start here PhotoSEAM Start here Multimedia Builder Start here Other tools UltraSnap Camera Tools
DIY Editing Remote control for Panasonic DVD Video Recorders
(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable) The idea works for any other DVD recorders. Pages: Intro 7 Digital Video Recorders Hard-disk DVR's are both cool and useful for quick work. They also offer a simple editing (cutting out commercials, setting chapter points, joining and formatting DVD menu). Yes I used the word simple, but DVR's are far from simple devices inside. They work with mpeg2 format, they are able to split or join mpeg2 and they do it in real-time and with a good quality. You can do these things on PC, that's correct, but with DVR you don't need to reboot it, it, remove 3 pounds of spyware from it every night, download drivers or breath very quietly near it when it does capture video in fear of drop frames. Even if you do all editing on computer, these things can be a great time saver for quick work. Except they are all consumer devices and so the word hip and cool overshadow the word ergonomic. They rather put a mirror faceplate than a jog shuttle even that the production cost in China for both is about the same. But what do I expect? For $5000 more I can probably get a big-square-model with large buttons, jog-shuttle, joystick and everything to make editing easier. And maybe even a mirror faceplate for thousand extra. I have a love-hate situation at home with Panasonic DMR-E85. I like the fact that it can produce great mpeg2 quality, all in real time, partially thanks to the real time temporal NR which allows for much better compression than a software under the same bitrate. But I am always struggling with the remote. There is a quite capable MPEG editor inside with frame cutting, but this is far from no cozy editing with a mouse. This is not even editing with a keyboard. This is a true punishment for all our TV recording sins. Don't get me wrong, as remotes go, this is actually a pretty good one. For example to cut out part of recording like commercial is an

10/06/2010

Page 2 of 2
exercise worth a game console fanatic. I have to hit Fast forward to quickly find the approximate start, then press Play, hit Forward back to find the exact start of it, eventually hit pause and slow forward or Play or back to get to the spot then hit OK to set Mark In. Oh, good, I've got it. Wait a minute! That's just the In mark. I have to do all this finger-circus for the Mark out!. And again and again - all with small packed buttons on remote where my finger easily covers two of them. I have to do it constantly looking at TV with one eye and looking down on remote with the other to see if I'm not pressing something I would regret. Of course what I really need is called Jog-Shuttle. Sadly Panasonic doesn't offer any alternative remote with jog-shuttle. It is a consumer product. Jog yourself. There are some more reasonable universal remote controls and few specialized for video editing even offers a shuttle-like control such as JVC JXED11. Unfortunately you can't really train a shuttle on a device that doesn't support it so you end up with a controller that is more cumbersome than normal buttons. On the following pages I will describe step by step how I created the homebrew editing controller for the Panasonic E85 DVD video recorder. It of course apply to any other recorder.
If you see anything interesting on this site which you think would be worth for your friends to know, simply click this button:

The link to this page will be included automatically. No SPAM! Neither you, nor your friend will become part of ANY mailing list.
Images on this web-site were captured with UltraSnap and created with Real-DRAW PRO MMB web | DVD-lab | Real-DRAW | Photo-Brush | DCE AutoEnhance | products | web board | galleries | search | contact | about | Buy Now www.MediaChance.com 2000

Page 1 of 3

(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable) The idea works for any other DVD recorders. Pages: Intro 7 Initial process I started thinking what I want from a good remote for editing with the E85.
large buttons that are far away so I don't have to look down. jog shuttle or other control that allows forwarding, playing and pausing in one place buttons for direction controller so I don't have to switch between remote
The second question is, can it be done in a reasonable time, without a custom processor and without spending much money, preferably using a "garage sale" components? Of course, generally what I need is to replace the mini buttons on remote with a large ones. Better yet without destroying the original remote, I can get some universal one in a department store, some buttons, wires and a bit of time. I soon realized that creating a home-brew jog-shuttle with switches is simply unrealistic. Jog-shuttle has to do much more than just switch on or off. But a joystick-like controller will do the editing task as well and it can be done all with switches. My design was getting its shape. Where to get switches? A healthy number of switches with buttons cost considerably when buying new in a component store. Not even mentioned that you can't really get any good looking buttons. It is one way to go, but I still like the idea of recycling.

Page 2 of 3

Fortunately a small visit to local EB (electronic boutique) reveal the secret source of used switches, joysticks, direction pads and buttons, all in a large groups and sold for just few $. Yes, old gaming console controllers. Presumably various third party Playstation 1 are the best bet. These old third party PS1 controllers often use joysticks, but unlike the new analogue joysticks, these are done by 4-way switch. It just sits in these used controller bins and whisper "Pick me, pick me". As a bonus each controllers has also a large number of buttons, switches etc. The price often starts at $2 per controller and for a $5 you can get a luxury one. Of course the idea is to get the "clickable" controllers that have real switches, instead of the rubber pad.
Here is my pick. I got two PS1 controllers. The first is one will be used for the joystick and all the push buttons. When you are choosing the joystick, listen if it clicks when tilted to side. If it doesn't then this is analog joystick and that isn't what we want. The second controller I choose for the directional pad. This one uses rubber pad switches so we will have to use also part of its circuit board where are the contacts. Let's collect all other components. I need some universal remote control that I will disassemble. I had this one Phillips that I got a time ago from Wal-Mart, but never really used it. Then I need some universal circuit board where I will solder all the switches (RadioShack), wires (The PS1 controllers have enough high quality wires in its cable) and a box. Lot of component stores including RadioShack sell plastic project boxes.

First, I tried the Phillips remote with the E85 and noted what buttons I want to "EXTRACT" from it. These were the:
<<, >>, Play, Pause, Stop, (obvious reason), these will be wired mostly to the joystick. Chapter up/down because the Navi screen uses these to go to prev/next navi screen Directional buttons with OK and Return because everything else is done with these. The button that controls the Navi screen and Submenu and eventually Record button (because I still got one switch left from the large PS1

Page 3 of 3

controller, so why not?) With these buttons I can do all work using the new controller and I don't need to touch the original remote
(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable) The idea works for any other DVD recorders. Pages: Intro 7 Disassembly In this step I will try to disassemble the PS1 controllers to collect all the switches, joystick and to salvage the directional pad. Taking out the joystick is easy. It is all contained into one component After opening the controller I have to take out only four screws and the joystick is main. It will be equally easy to add it to my board. For the push buttons, this already require some de-soldering. As I de solder the board on the back around the button contacts, they basically fell down.
The PS1 controller from inside before the surgery.
The joystick controller is removed. I couldn't buy better one eve if I try.
Here are the push-buttons in The buttons are already out. the original mask.
I checked all buttons and the joystick with ohm-meter just to be sure they are all good. Checking every step is the best way to make sure the result will work without any problems. The last, most difficult part of the disassembly step, is the directional pad from the second controller. Here I have to cut out the circuit board, since the contacts for the pad are on it. Then I have to remove all the unnecessary copper lines and components so only the contacts will remain. Destroying board is much easier than making it. All what is needed is excessive heat from the solder tool and making sure the contacts stay clear.
The second controller will I removed the unnecessary Here is detailed view at be used for its directional lines and to basically have the part with contacts. pad only. only the contacts.

This is the salvage so far. A full box of buttons, switches and other goodies.
So now I have a full box of switches, push buttons and screws. I also took out the wires from the controller cable. They are thin, yet strong to sustain the controller abuse each is in different color. What can I wish more. Now is the time to look at the remote control. The following part is the most delicate.
Images on this web-site were captured with UltraSnap and created with Real-DRAW PRO
MMB web | DVD-lab | Real-DRAW | Photo-Brush | DCE AutoEnhance | products | web board | galleries | search | contact | about | Buy Now www.MediaChance.com 2000
(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable) The idea works for any other DVD recorders. Pages: Intro 7 Attaching cables to the universal remote circuit board This is the most crucial step and if we don't do this step properly, there is no reason to continue. First, let's have a good look at the remote circuit board. The Integrated circuit is soldered to the copper layer. Between the two layers - copper and graphite is isolation. But there are points at which the graphite layer is joined with the bottom copper. If you look closely these are visible as small inset circles on the graphite. These are the best places to attach wires. Now let's check which contacts we need. I previously list all the buttons I like to use, now I will locate the contacts for these buttons on the graphite and locate the inset joint circles as described above. I will mark these with a marker. Obviously, since the buttons are in a matrix, many will have common wires so I will then check if I didn't mark any redundant joints. At this moment we have to pause and decide how we are going to attach the wires to the board. Firs way is to solder the wires to the joints. I must warn you, this step is only for people who have enough experience with soldering such fine elements. This is not easy task and if you are not confident or never done such things, this is not the best time to experiment. Other, much easier way is to glue the wires there! Yes, there is such thing like a special conductive silver glue or epoxy. It can be bought from radio-amateur stores or ordered online. The silver conductive glue is great invention for this application. Since the contacts on remote are graphite, the integrated circuit doesn't expect for the buttons to be 100% perfectly conductive. In fact you may be able to bridge contacts even with your skin on finger which has quite some considerable electric resistance. In both ways we have to remember that we would need to place the rubber keypad on the board when setting things up to set the remote code, then we can remove it. This means the wires cannot block any of the numbers or the device selector on top.

Here are the joints between the graphite and copper layer.
I marked the contacts I need with marker
Scratching the surface and adding solder to the joint
Soldering a cable to the joint
I choose the first method because I am confident I can do it. I spent my teen years with soldering iron in hand and soldering wires to thin layer is not the most difficult job I ever did. Again, warning, if you are not confident soldering, get a glue. Before soldering I took scalpel and scratched the top of the graphite from the joints to reveal the bottom copper layer. I took special care to be sure I am working on joints between layers, not scratching the isolation on places where these two layers must not touch. Then I had to put a bit of solder to these joints. This is difficult and it involves scratching the joint with scalpel so the copper layer is clean, using extra flux and always clean soldering tip. Never heat the joint too long. If it doesn't take the solder after few sec, stop, scratch it again, use flux, clean tip and start again. The goal is to put a bit of the solder to the joints so in next phase we can quickly solder wires to them. I prepared the wires from the PS1 controller cable. They are each different color, which is very good. I leave enough length, it is easier to cut later. Take out a very little isolation, use flux and add solder to the wires. Now
we are ready. Quickly heat the wire in the joint so they get soldered together. If you are using glue, then all this is much easier. You can actually simply glue the wires to the graphite layer, the best is in place of joints, since there is the strongest bond with the board. When all wires are there, there is one important step - to mechanically secure the wires to the board. I use for these kind of things hot glue. This is important because while the wire can have good electrical contact with the circuit board, such contact is not good mechanically. It is very easy to break the lines in board when pulling the wires and believe me there will be a lot of pulling later. I simply secured the wires with hot glue to the edge of the board. Now I took a paper and pen and by tracing the remote board I marked which two wires control which button. You will be happy to have colored wires! Before I can go further, I want to be sure I didn't destroyed the remote, so I put batteries in , put the rubber back on top to set the code for Panasonic (My Phillips used 641 code so I had to press-hold learn, press DVD and put the code). Then I took the rubber keyboard off again and tried the device on the E85 by simply touching the two wires I marked. I checked all of them if all works as planned. In my case all was all right. That means both the soldered joints are fine and I also marked the wires correctly. It is vital to do this step at this stage, because it is much harder to locate bugs later.

First wire attached.

All wires are now attached using colored cables
A detail of the soldered wires
This is the remote with both LED on wires and a battery box.
I took out the battery and took out the infrared LED and the red LED and solder them to a long wires, then solder the wires back to the board making sure I keep the correct polarity. I simply put mark with marker on one side of the led contact and same mark on the board. If you reverse polarity, you will be scratching your head why it doesn't work. So this is the most difficult part and it is done, so put it away to safe place
(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable.) The idea works for any other DVD recorders. Pages: Intro 7 Buttons assembly. First I designed the new layout on computer in a drawing software, then tried it by placing buttons on top of my board and checking the ergonomy. The goal here is so with each hand I should be able to easily press required buttons, without actually moving the hand from position. So for example holding joystick, I should be able to press OK or Return button with thumb without removing the hand from joystick, same with the directional pad. For the joystick I designed it so left will be|<<, right will be >>, bottom will be pause and top will be play. These are the buttons that are used during editing on the E85 when I want to set mark In or Out. With joystick, I can use all 4 functions without checking my finger position. I will put a stop button above the joystick and record button to the center top where it cannot be activated accidentally.
Here I placed all the components on a board to find out the best distances.
I added wires to the directional pad board.
The buttons are soldered and Here is a detail of the joystick and directional pad the directional pad. are attached using screws
You have to also make sure you will have enough space in the box for the actual remote control board. So at this moment decide where the board will be and leave enough space there. Then I created bigger holes for the contacts of each switch and holes for the joystick screws. The conductive side of my universal circuit board will be on the reverse side and I will solder the push buttons to it. I also add some hot glue to the edges around the buttons, just to make sure the bond is strong. In previous step I salvaged the directional pad from the PS1 controller by cutting around the circuit board and removing the lines I don't need, leaving basically only the four contact pads with some lines to them. I made some holes for the wires and attached necessary wires to the lines. Again, you have to check the matrix of the buttons. In my case as it turned out 3 buttons had common wire. Then I add screws to hold the rubber pad to the little board. The four-way large plastic button will be placed on top of this sandwich and will be actually held there by the outer box so it can freely move. The next step is to mount the small board with the directional pad onto the main board. Here is important note, we will need to adjust the height later so I used longer screws.

(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable.) The idea works for any other DVD recorders. Pages: Intro 7 Connecting it together. When all things are in the place, now is the time to connect the universal remote spider with the boards. Since many of the wires from board will be used by more than one button, we will need additional wires. A word of advice is to use same color of wire for subsequent connections. It will be much easier to fix things later. I simply followed my paper notes since I already tested that they are correct. Note: My salvaged joystick control is done such way that if the joystick is up, the bottom push switch is ON, when joystick is moved to left, the right switch is ON etc. Just make sure you check this before you solder wires so you do not have to redo things. There are quite a few wires to be added so it become a bit messy.
All is connected together
A detail of reverse size of the board
Again, time for step testing, I added batteries, placed the rubber keypad over the remote and set the remote code for Panasonic, then removed the keypad. I moved the IR LED on front of E85 and had a deep breath. Then
tried pushing buttons and joystick. All worked perfectly. This step is then done so I used hot glue gun to attach the many wires to the board so they don't get loose when I will be fitting it to the box. This is always a good step, it saves lot of time in long run.
(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable) The idea works for any other DVD recorders. Pages: Intro 7 The Box. I used the project box that is large enough to hold the board and a remote control board inside. I then measured all the buttons placements and draw the openings of the box on computer. At home it is not easy to make things to fit exactly. Remember that. Leave enough clearance around the buttons, we will cover it later. The only precise placement and size is the circle that will hold the 4way directional button, because it must fit, be loose enough so it works and make sure the button doesn't pop out. All others holes can have much higher error. So I put it on computer, printed it, cut out the holes, then placed it over the buttons to see how well I made it. It needed few corrections. Then I printed it again, secured it on top of the box and marked the centers of the holes for drill. To drill large holes is not that easy with hand-held drill, you may ask somebody who has table drill to do it for you. The only requirement is the correct directional pad hole size. All others can be larger. So for the directional pad drill smaller hole and use fine file to work it out to the correct size.

The board is attached to the bottom half of the project box
I have to make sure the height of the board can be adjusted
This is how it will be all placed inside the box.
The directional button has small pin to avoid rotating it around.
I attached the main circuit board to the bottom half of the project box with screws that allow for height alignment. Using four screws is not enough. To avoid any bending of the board when buttons are pressed, the screws have to be placed also in center and around larger buttons. I also attached the remote controller board to the bottom half. This time I used hot glue, since there will be no physical pressure on this board. It is important to have access to the original buttons so the rubber keypad can be attached and the remote programmed. This will need to to be done only occasionally so the rubber keyboard doesn't need to be attached there permanently. I will however store the rubber keyboard folded inside the box so I don't have to look for it when needed. When I do such things like this, I also always print a schematic or instructions and place them inside the box as well. In this case there is no really schematic, just bunch of wires. But the instructions how to program the remote can be a big help. After year or so there is little chance to remember what I had done, or in this case how do I need to reprogram the remote if the batteries
need to be changed. This little trick saved me previously a lot of trouble. Last thing is to drill hole to front panel for the IR LED and in top panel for the red indicator LED. I left a long wire to these LEDs so the case can open easy. Again I used hot glue to attach the LED to the plastic case.
The box is closed and buttons are added to the switches.
Here it is assembled with joystick ball.
A top view. It still needs some finishing touch, but it si already fully working
Again, time for step testing, I added batteries, placed the rubber keypad over the remote and set the remote code for Panasonic, then removed the keypad. I moved the IR LED on front of E85 and had a deep breath. Then tried pushing buttons and joystick. All worked perfectly.
(A guerrilla remote control to make editing on DMR-E80/E85/E100 just a bit more enjoyable.) The idea works for any other DVD recorders. Pages: Intro 7 The finishing touch. All what this new remote needs is some finishing touch. For start we can describe which button does what. So what we need is a face-plate. We don't need anything too fancy. A simple design, printed on a photo paper. Then I used a self-laminating sheet and simply put the printout the face to the adhesive side of the sheet.

Printed "face-plate" before cutting the holes
The mask is glued on to the box
Then I cut out the holes with a scalpel on a cutting mat and glued the mask to the top of the box. After all this I sprayed the top of box with acrylic sealer to smooth out the cuted edges, but it is of course optional. I realized that the buttons are all in different height and tilted because the original controller was curved. I used this to my advantage, make sure the tilt is placed correctly (lower edge towards me) and choose less important buttons with lower height. This is apparent for example on the Navigation and Submenu buttons.
Since some of the buttons had a writing on them, I sprayed them with Enamel (the one used for plastic models) making white, black and grey buttons. (for gray I used the balck and white).
All is done and my controller is ready for prime-time. It took me about 3 hours for two evenings from dissasembly of controllers to the final touch.
My 4 years old daughter couldn't resist and draw a picture of me working on this project. I am sitting on a chair holding the soldering iron. She is running around with a bunch of wires in her hand that she steal from my table.

The illustration shows DVD-S29 for U.S.A. and Canada.

Operating Instructions

DVD/CD PLAYER

Model No.

MULTI-FORMAT PLAYBACK

DVD-RAM

recorded with DVD video recorders etc.

DVD-S29/DVD-S26

Video & Still pictures (JPEG)

DVD-Video/Video CD/CD

If you have any questions contact

Movie, Music etc.

In the U.S.A.: 1-800-211-PANA(7262) In Canada: 1-800-561-5505

DVD-R/DVD-RW/+R/+RW

Video (played as DVD-Video)
recorded and finalized with DVD video recorders etc.
recorded and finalized with personal computers etc.
Music (WMA/MP3) & Still pictures (JPEG)
See page 5 for details. For U.S.A.: The warranty can be found on page 20. For Canada: The warranty can be found on page 21. La referencia rpida en espaol se puede encontrar en la pgina 22, 23.
Unless otherwise indicated, illustrations in these operating instructions are DVD-S29 for U.S.A. and Canada.

RQT8218-P

Reference

CD-R/CD-RW

Operations

sold on the market

Getting started

Dear customer

Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.

Accessories

(Only for U.S.A.) To order accessories, refer to Accessory Purchases on page 20. (For other areas) To order accessories, call the dealer from whom you have made your purchase. Use numbers when asking for replacement parts. (Product numbers correct as of April 2005. These may be subject to change.)

Table of contents

Table of contents/Accessories
Accessories. 2 IMPORTANT SAFETY INSTRUCTIONS/Product Service. 4 Discs that can be played. 5
STEP 1 Connection to a television. 6 STEP 2 The remote control. 7 STEP 3 QUICK SETUP. 7 Operations
Basic play. 8 Convenient functions. 9
Displaying current playback condition (Quick On Screen Display)/ Reviewing titles/programs to play (Advanced Disc Review)/ Enjoying clear sound (Sound Enhancement).9 Recalling recommended audio/video setting (AV Enhancer)/ Enjoying virtual surround (Advanced Surround)/ Picture Mode/Changing play speed/ Skipping a minute forward/Zoom/Starting play from a selected group.10 Changing soundtracks/Changing subtitles/Angle select/Still picture rotation/ Quick replay/Program/Random play.11
Remote control AC power supply cord [U.S.A.\and\Canada] \Others] 1 Audio/video cable 2 Remote control batteries [Except\U.S.A.\and\Canada] 1 Power plug adaptor
(EUR7631100R) (K2CB2CB00016) (RJA0019-2X) (K2KA6BA00004)

(K2DA42E00001)

[Note]
The included AC power supply cord is for use with this unit only. Do not use it with other equipment. User memo: DATE OF PURCHASE ____________________________________________ DEALER NAME _________________________________________________ DEALER ADDRESS ______________________________________________ _______________________________________________________________ TELEPHONE NUMBER ___________________________________________ The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER

Using navigation menus. 12
Playing WMA/MP3/JPEG discs.12 Playing CD/Playing HighMATTM discs/Playing RAM discs.13
Using On-Screen Menus. 14
Main menus/Other Settings.14
Changing the player settings. 16
Troubleshooting guide. 18 Limited Warranty (ONLY FOR U.S.A.). 20 Limited Warranty (ONLY FOR CANADA)/Maintenance. 21 Specifications. 22

RQT8218

Referencia rpida en espaol (Spanish Quick Reference). 22 Main feature index. Back cover

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Except for U.S.A. and Canada

CLASS 1 LASER PRODUCT

(Inside of product) THE FOLLOWING APPLIES ONLY IN THE U.S.A.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT SAFETY INSTRUCTIONS/Product Service

Product Service

1. Damage requiring serviceThe unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. ServicingDo not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement partsWhen parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety checkAfter repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Product information

For product information or assistance with product operation: In the U.S.A., refer to Customer Services Directory on page 20. In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

Discs that can be played

Operations in these instructions are described mainly with the formats. The icons such as [RAM] show the formats. DVD-RAM [RAM] [JPEG] [RAM] Recorded with devices using Version 1.1 of the Video Recording Format (a unified video recording standard), such as DVD video recorders, DVD video cameras, personal computers, etc. [JPEG] Recorded using the DCF (Design rule for Camera File system) Standard Version 1.0. To play JPEG files, select Play as Data Disc ( page 15, Other Menu). DVD-Video [DVD-V] Example: Discs marked with the labels containing the region ALL number 1 or ALL

Handling precautions

Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable). Do not write on the label side with a ball-point pen or other writing instrument. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. Do not use scratch-proof protectors or covers. Do not use the following discs: Discs with exposed adhesive from removed stickers or labels (rented discs etc). Discs that are badly warped or cracked. Irregularly shaped discs, such as heart shapes.

STEP 1 Connection to a television
Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit. Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly. Turn off all equipment before connection and read the appropriate operating instructions. Connect the terminals of the same color.
Television Connection to a television
With VIDEO IN or S VIDEO IN
AUDIO IN R L VIDEO IN or S VIDEO IN

With COMPONENT VIDEO IN

AUDIO IN R L COMPONENT VIDEO IN
S video cable Audio/video cable (included) Audio/video cable (included) Not used Video cables

Back of the unit

Please connect directly to TV.
Please connect directly to TV. y
When using this connection, the audio cable (red and white plugs) should also be connected.
Select Darker from the Black Level Control ( page 16, Video tab).
To enjoy progressive video You can connect the audio cable to the 2channel audio input terminals of an analog amplifier or system component to enjoy stereo sound.
Connect to a progressive output compatible television. Set Video Output Mode to 480p, then follow the instructions on the menu screen ( page 15, Picture Menu). All Panasonic televisions with 480p input connectors are compatible. Consult the manufacturer if you have another brand of television.
Enjoying multi-channel surround sound
Connect the AC power supply cord last
AC power supply cord (included) To household AC outlet
Amplifier with a built-in decoder or a decoderamplifier combination

Coaxial cable

Conserving power

COAXIAL IN

Change PCM Digital Output, Dolby Digital and DTS Digital Surround ( page 17, Audio tab).

Except U.S.A. and Canada

If the power plug does not fit your AC outlet, use the power plug adaptor (included). If it still doesnt fit, contact an electrical parts distributor for assistance.
STEP 2 The remote control

Batteries

R6/LR6, AA
Insert so the poles (i and j) match those in the remote control. Do not use rechargeable type batteries. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

Do not:

mix old and new batteries. use different types at the same time. heat or expose to flame. take apart or short circuit. attempt to recharge alkaline or manganese batteries. use batteries if the covering has been peeled off.
Aim at the remote control sensor ( page 8), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.

STEP 3 QUICK SETUP

Turn on the television and select the appropriate video input on the television.

When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.

Convenient functions

[DVD-S29]

Group skip

[WMA] [MP3] [JPEG]

QUICK OSD

Displaying current playback condition
(Main unit) [VCD] forward direction only

Quick On Screen Display

Press [QUICK OSD].
e.g. [DVD-V] Current playback number

Frame-by-frame

(during pause) [RAM] [DVD-V] [VCD]

Elapsed play time

Chapter

0 : 00 : 22

Select

Playback condition

On-screen item select

Register

Return to previous screen

Program Playback

Play mode To exit the screen, press [QUICK OSD].

Current position

Enter number
[RAM] [DVD-V] (Except iR/iRW) (Normal playback only)

DIRECT NAVIGATOR [DVD-V]

Shows a disc top menu. [RAM] Plays the programs ( page 13). [DVD-V] Shows a disc menu. [RAM] Plays a play list ( page 13). [VCD] with playback control Shows a disc menu.

Disc menu

1 Press [ADVANCED DISC REVIEW]. 2 Press [1] (PLAY) when you find a title/program to play.
You can also review each 10 minutes. Select Interval Mode ( page 16, Advanced Disc Review in Disc tab). This may not work depending on the play position.

SOUND ENHANCEMENT

Enjoying clear sound

Sound Enhancement

Main unit display Information screen

[JPEG]

FL SELECT
Number display ,------. Time display
[RAM] [DVD-V] [VCD] [CD] [WMA] [MP3] You can enjoy clear sound by adding higher frequency signals not recorded on the disc.

SUBTITLE

This does not work when Advanced Surround ( page 10) is on. This may not work depending on the discs recording.

Sound Enhancement On

Press [SOUND ENHANCEMENT] to select On.

Functions

[RAM] [DVD-V] [VCD] [CD] e.g. To select 12: [S10] [1] [2] [WMA] [MP3] [JPEG] e.g. To select 123: [1] [2] [3] [ENTER]

ADVANCED DISC REVIEW

[DVD-S26] (Main unit)
Reviewing titles/programs to play

Advanced Disc Review

AV ENHANCER
Recalling recommended audio/video setting

PLAY SPEED

Changing play speed [RAM] [DVD-V]
Play Speed x1.4 Normal Fast Slow

AV Enhancer

By pressing just one button the disc type is automatically determined and the best audio and video settings are configured.

Functions AV Enhancer On

During play, press [PLAY SPEED] to select Fast, Normal or Slow.
Fine adjustments While the menu is displayed Press [21] to increase or decrease the playing speed from k0.6 to k1.4 in 0.1 units.
Press [AV ENHANCER] to select On.
This may not work depending on the discs recording.
When AV Enhancer is on, you cannot change the individual settings indicated below. Audio settings: Advanced Surround ( below), Sound Enhancement ( page 9), Dialogue Enhancer ( page 15) Video settings: Picture Mode ( below)

ADVANCED SURROUND

Press [1] (PLAY) to return to the normal play. After you change the speed Advanced Surround ( left) and Sound Enhancement ( page 9) do not work. Audio output switches to 2 ch. 96 kHz sampling frequency is converted to 48 kHz. This may not work depending on the discs recording.
Enjoying virtual surround Advanced Surround
[RAM] [DVD-V] [VCD] (2 or more channels)
Skipping a minute forward [RAM] [DVD-V] (Except iR/iRW)
Convenient when you want to skip commercials etc.
Press [ADVANCED SURROUND] to select SP 1, SP 2,HP 1or HP 2.
SP (Speaker) 1 Natural HP (Headphone) 1 Natural SP 2 Enhanced HP 2 Enhanced Off
Functions Advanced Surround SP 1
During play, press [CM SKIP].
This may not work depending on the play position.
When using discs recorded with surround sound, sound seems to come from speakers on either side of you. When using headphones from the connected equipment, select HP 1 or HP 2. Optimum seating position is 3 to 4 times the distance between the front left and right speakers or the width of the television if using the televisions speakers. Do not use in combination with surround effects on other equipment.

Zoom [RAM] [DVD-V] [VCD]

This feature expands the letterbox picture to fit the screen.
Press [ZOOM] to select the preset aspect ratio or Auto. (Just Fit Zoom)

[RAM] (On/Off only with discs that contain subtitle on/off information) [DVD-V] [VCD]

2 Press [1] (PLAY).

Selecting all the items (on the disc or in the title or group) Press [ENTER] and [3 4] to select ALL, then press [ENTER] again to register. Changing the program Press [3 4] to select an item. To change an item, repeat step 1. To clear an item, press [CANCEL] (or select Clear and press [ENTER]). Press [ANGLE/PAGE] to skip page by page.
Press [SUBTITLE] to select the subtitle language.
On iR/iRW, a subtitle number may be shown for subtitles that are not displayed. To clear/display the subtitles Press [2 1] to select On or Off. [RAM]

Functions Subtitle Off

Press [SUBTITLE] to select On or Off.
Subtitle on/off information cannot be recorded using Panasonic DVD Recorders.

ANGLE/PAGE

Angle select [DVD-V] (with multiple angles) Still picture rotation [JPEG]

e.g. [DVD-V]

Clearing the whole program Select Clear all and press [ENTER]. The whole program is also cleared when the unit is turned off or the disc tray is opened.

Random play

1 [DVD-V] [WMA] [MP3] [JPEG] Press the numbered buttons to select a group or a title ( page 9, Enter number). 2 Press [1] (PLAY).
To exit the program or random mode Press [PLAY MODE] several times while stopped.
Random Playback Press PLAY to start

Choose a title. Title 1

0 ~ 9 to select PLAY to start
Press [ANGLE/PAGE] to select the angle or rotate the still picture.
Changing subtitles [DVD-V] (with subtitles) [VCD] (SVCD only)

Using navigation menus

Playing WMA/MP3/JPEG discs [WMA] [MP3] [JPEG]
You can play JPEG files on DVD-RAM or play HighMAT discs without using the HighMAT function ( page 15, Play as Data Disc in Other Menu).
Playing items in order (Playback Menu)
While the menu is displayed

Using the submenu

Playback Menu All Audio Picture Total 434 Total 7 Total 427
Press [3 4] to select All, Audio or Picture WMA/MP3/JPEG WMA/MP3 and press [ENTER].

To display/exit the screen, press [TOP MENU]. JPEG
1 Press [MENU]. 2 Press [FUNCTIONS]. 3 Press [3 4] to select an item and press [ENTER].
Multi List Tree Thumbnail Next group Previous group All Audio Picture Help display Find
Groups and content Content only Groups only Thumbnail images [JPEG] To the next group To the previous group WMA/MP3 and JPEG WMA/MP3 only JPEG only To switch between guide messages and the elapsed play time indicator To search by a content or group title ( see below)

to select and press

Playing from the selected item (Navigation Menu) 1 Press [MENU]. 2 Press [3421] to select the group and press [ENTER]. 3 To play content in the group in order Press [ENTER]. To start play from the selected content Press [34] to select and press [ENTER].
Group and content number currently playing
Navigation Menu 002 My favoriteJapanese 001 Lady Starfish Perfume 001 My favoriteMy favoriteBrazilian 002 Chinese 003 Czech 004 Hungarian 005 Japanese 006 Mexican 007 Philippine 008 Swedish 009 Piano 010 Vocal Group 005/023

FUNCTIONS

Searching by a content or group title

1 Press [MENU].

Press [2 1] to highlight a group title to search a group, or a content title to search its content.

:JPEG :WMA/MP3

001 Lady Starfish 002 Metal Glue 003 Life on Jupiter 004 Starperson
2 Press [FUNCTIONS]. 3 Press [3 4] to select Find and press [ENTER]. 4 Press [3 4] to select a character and press [ENTER].

Content 0001/0004

RETURN to exit

to display the sub menu

Number currently selected

Content

Press [ANGLE/PAGE] to skip page by page. To listen to WMA/MP3 while showing a JPEG image on the screen Select a JPEG first, and then select WMA/MP3. (The opposite order is not effective.) To exit the screen, press [MENU].
Repeat to enter another character. Lower case is also searched. Press [6 5] to skip between A, E, I, O and U. Press [2] to erase a character. Erase the asterisk () to search for the titles starting with that character.
5 Press [1] to select Find and press [ENTER].
The search result screen appears.
6 Press [3 4] to select the content or group and press [ENTER].

Playing CD [CD]

DIRECT NAVIGATOR PLAY LIST

Playing RAM discs [RAM]

Titles appear with CD text playback.

e.g. CD text

CD Text Disc Title: All By Artist Disc Artist: Pink Island Track Title: Long John Platinum Track Artist: SHIPWRECKED 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Ashley at Prom City Penguin Formura one Soccer Baseball Neanderthal Cartoons Trilobites White Dwarf Discovery
1 Press [MENU]. 2 Press [3 4] to select the track and press [ENTER].
Press [ANGLE/PAGE] to skip page by page. To exit the screen, press [MENU].
Titles appear only if you have entered them. You cannot edit play lists and titles.

Playing the programs

1 Press [DIRECT NAVIGATOR]. 2 Press [3 4] or the numbered buttons to select the program.
Press [ANGLE/PAGE] to skip page by page. To select a 2-digit number e.g. 23: [S10] [2] [3] Press [1] to show the contents of the program.

Direct Navigator

to select and press ENTER
Press [FUNCTIONS] to switch between guide messages and the elapsed play time indicator.
Date 11/ 1(WED) 1/ 1 (MON) 2/ 2 (TUE) 3/ 3 (WED) 4/10(THU)

9 to select

On 0:05 AM 1:05 PM 2:21 PM 3:37 PM 11:05 AM
Title Monday feature Auto action Cinema Music Baseball

Contents

TOP MENU MENU
Playing HighMATTM discs [WMA] [MP3] [JPEG]

3 Press [ENTER].

to exit
Press [3421] to select then press [ENTER].
Menu: Takes you to the next menu which shows play lists or another menu. Play list: Play starts.
Playing a play list (Only when the disc contains a play list)
1 Press [PLAY LIST]. 2 Press [3 4] or the numbered buttons to select the play list.
Press [ANGLE/PAGE] to skip page by page. To select a 2-digit number e.g. 23: [S10] [2] [3]

Playlist No. 9 10

Date 11/1 1/ 1 2/ 2 3/ 3 4/10 4/11 4/ 15 4/ 17 4/ 20 4/22
Length 0:00:01 0:01:20 1:10:04 0:10:20 0:00:01 0:00:01 0:01:10 0:13:22 0:05:30 0:07:29
Title City Penguin Ashley at Prom Formula one Soccer Baseball City Penguin Ashley at Prom Formula one Soccer Baseball
To return to the menu screen, press [TOP MENU] then press [RETURN] several times. To change the menu background, press [FUNCTIONS]. The background changes to the one recorded on the disc. To display/exit the screen, press [TOP MENU].

Bitstream

Display tab
Menu Language On-Screen Messages English On Franais Off Espaol

Others tab

FL Dimmer Changes the brightness of the units display. Auto Power Off Bright Dim Auto: The display is dimmed, but brightens only when you perform some operations. On: The unit switches to standby mode after about 30 minutes in the stop mode. Off Yes No Yes: The password screen is shown if Ratings ( page 16) are set. Please enter the same password. After INI on the display disappears, turn the unit off and on again. No
QUICK SETUP Re-initialize Setting This returns all values in the Setup menus to the default settings.
Dynamic Range Compression

Off On:

Adjusts for clarity even when the volume is low through compressing the range of the lowest sound level and the highest sound level. Convenient for late night viewing. (Only works with Dolby Digital)

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the Customer Services Directory on page 20 if you reside in the U.S.A., or refer to the Product information on page 4 if you reside in Canada. In other areas, consult your dealer for instructions. (Reference pages are shown in parentheses.)
No power. The unit is automatically switched to the standby mode. Insert the AC power supply cord securely into the household AC outlet. (7) When Auto Power Off is set to On, the unit automatically switches to standby after approximately 30 minutes in the stop mode. (17) Subtitle position is wrong. No subtitles. The subtitles overlap closed captions recorded on discs. In A-B repeat, point B is automatically set. Repeat play is automatically canceled.
Adjust the position. (Subtitle Position in Display Menu) (15) Display the subtitles. (11) Clear the subtitles. (11)

No operation

No response when any buttons pressed. This unit cannot play discs other than the ones listed in these operating instructions. (5) The unit may not be operating properly due to lightning, static electricity or some other external factor. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. Condensation has formed: Wait 1 to 2 hours for it to evaporate. Check that the batteries are installed correctly. (7) The batteries are depleted: Replace them with new ones. (7) Point the remote control at the remote control sensor and operate. (8) Check the video or audio connection. (6, 7) Check the power or input setting of the connected equipment. Check that the DVD-RAM has something recorded on it. While stopped, press and hold [QUICK OSD] [DVD-S29] or [ADVANCED DISC REVIEW] [DVD-S26] and [;] on the unit and then also press and hold [< OPEN/CLOSE] on the unit until Initialized disappears from the television. Turn the unit off and on again. All settings will return to the default values.

The end of an item becomes point B when it is reached.
A-B repeat is canceled when you press [QUICK REPLAY]. Repeat play may be canceled when you press [CM SKIP] or [ADVANCED DISC REVIEW].

Picture incorrect

Picture distorted. Ensure that the unit is not connected through a video cassette recorder. (6) Make sure that progressive output has not been selected when the connected television is not progressive compatible. Press and hold [CANCEL] until the picture displays correctly. The settings will return to 480i. Change TV Aspect in Video tab. (16) Use the television to change the aspect. If your television does not have that function, change 4:3 Aspect in Display Menu. (15) Change the Zoom setting. (10) PAL discs cannot be played.
No response when remote control buttons pressed. No picture or sound.
You have forgotten your ratings password. Reset all the settings to Factory Preset.
Picture size doesnt fit the screen.
Specific operation impossible or incorrect
It takes time before play starts. [MP3] The program and random play functions do not work. [DVD-V] Menu doesnt appear. [VCD] with playback control Play may take time to begin when an MP3 track has still picture data. Even after the track starts, the correct play time will not be displayed, however this is normal. These functions do not work with some DVD-Videos.
Press [] twice and then press [1] (PLAY).
The television may display incorrectly or colors appear faded. Menu not displayed correctly. Auto zoom function does not work well.
Restore the zoom ratio to a1.00. (10) Set Subtitle Position in Display Menu to 0. (15) Set 4:3 Aspect in Display Menu to Normal. (15) Turn off TVs zoom function. Use the other preset aspect ratios or manual adjustment. (10) Zoom function may not work well, especially in dark scenes and may not work depending on the type of disc.

Progressive video

There is ghosting when progressive output is on. Pictures not in progressive output. Closed captions not displayed. This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output. Change Video Output Mode in Picture Menu to 480i. (15) If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be interlace. When progressive output is on, closed captions will not be displayed.

Panasonic DVD Player Limited Warranty
Panasonic Puerto Rico, Inc. Ave. 65 de Infantera, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
During the Labor Limited Warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. If non-rechargeable batteries are included, they are not warranted. This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers product purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty service. Mail-In Service For assistance in the continental U.S.A. in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone and/or email address where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as hotel, office, restaurant, or other business), rental use of the product, or service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer, loss of or damage to media or images, data or other recorded content. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Men del disco

Main feature index (Reference pages are shown in parentheses.)
Displays current playback condition (9) Reviews titles/programs to play (9)
Changes the units display (9)
To enjoy virtual surround (10) To enjoy clear sound (9)
Recalls recommended audio/video setting (10)
To select the preset picture quality (10) Skips a minute forward (10) Skips back a few seconds (11)
Shows a disc top menu (9) or program list (13)
This manual was printed with soy based ink.
DIRECT NAVIGATOR PLAY LIST TOP MENU MENU
Shows On-Screen Menus (14)
Shows a disc menu (9, 12, 13) or play list (13)

[U.S.A.\and\Canada\

Changes subtitles (11) Changes soundtracks (11) Program/random play (11) Changes play speed (10)

[U.S.A.]

Changes angles or rotates still pictures (11) Selects groups to play (10) Changes the zoom ratio (10)

[Canada]

As an ENERGY STAR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
For Canada only: The word Participant is used in place of the word Partner.
Panasonic Puerto Rico, Inc. Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America Ave. 65 de Infantera, Km. 9.5
One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com \Others]

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Matsushita Electric Industrial Co., Ltd. Corporate Management Division for the Americas
Sales Office for North America Tokyo Panasonic Sales Section 32nd Floor, World Trade Center 4-1, Hamamatsu-cho, 2-Chome, Minato-Ku, Tokyo 105-6132, Japan C 2005 Matsushita Electric Industrial Co., Ltd. Printed in China
Panasonic Marketing Europe G.M.B.H. Wiesbaden N. (a Division of Panasonic Marketing G.M.B.H.)
Military Sales Department 6200 Wiesbaden-Biebrich, Hagenauerstr. 43 Germany

F0405AK0