CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
[For[units[with[PX[printed[on[the[outer[packaging]
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-PANA (7262)

About Firmware updates (

Reference
DMP-BD65_45_VQT2H86_eng.book 4

Accessory

Check the supplied accessories before using this unit. 1 Remote control [BD65] [BD655] (N2QAKB000076) [BD45] (N2QAKB000078) Audio/Video cable (K2KA6BA00004) Batteries for remote control AC power supply cord [For[U.S.A.[and[Canada] (K2CB2CB00022) [For[units[with[PX[printed[on[the[outer[packaging] (K2CQ2CA00007) [For[units[with[PX[printed[on[the[outer[packaging] AC plug adaptor (K2DAYYY00002) [BD655] HDMI cable (K1HA19DA0005)

Unit and media care

Clean this unit with a soft, dry cloth
Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, carefully read the instructions that came with the cloth.
Clean the lens with the lens cleaner disc
Lens cleaner disc: RP-CL720PP (not included) This lens cleaner is sold as specific for DIGA, but can be used on this unit as well.

Clean discs

DO DO NOT
(ONLY FOR CANADA) The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit. Wipe with a damp cloth and then wipe dry.
Product numbers correct as of December 2009. These may be subject to change. Do not use AC power supply cord with other equipment. Only for U.S.A. and Puerto Rico: To order accessories, refer to Accessory Purchases (United States and Puerto Rico) on page 39. For other areas: To order accessories, call the dealer from whom you have made your purchase.
Disc and card handling precautions
Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc. Do not attach labels or stickers to discs. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. Clean any dust, water, or foreign matter from the terminals on the rear side of the card. Do not use the following discs: Discs with exposed adhesive from removed stickers or labels (rented discs etc). Discs that are badly warped or cracked. Irregularly shaped discs, such as heart shapes.

Using the remote control

Insert so the poles (i and j) match those in the remote control.

Via a VIDEO OUT terminal

HDMI IN

COMPONENT VIDEO IN

AUDIO IN R L

AUDIO IN R L VIDEO IN

HDMI cable (Only included in DMP-BD655)

Component Video cable

Audio/Video cable (included)
The HDMI connection supports VIERA Link HDAVI Control ( 21) when used with a compatible Panasonic TV. Set HDMI Video Mode [BD65] [BD655] and HDMI Audio Output to On ( 27).
Connect terminals of the same color. Set Component Video Resolution to 480p, 720p or 1080i ( 27). Set HDMI Video Mode to Off ( 27).
Connect terminals of the same color.
DMP-BD65_45_VQT2H86_eng.book 9
STEP 2 : Connecting to an amplifier/receiver

Digital Audio

Via an HDMI AV OUT terminal Via an OPTICAL terminal

Amplifier/receiver

HDMI IN HDMI cable Multi channel speakers

HDMI OUT

OPTICAL IN
Optical cable Amplifier/receiver
The HDMI connection supports VIERA Link HDAVI Control ( 21) when used with a compatible Panasonic TV. Set HDMI Video Mode [BD65] [BD655] and HDMI Audio Output to On ( 27). Set Digital Audio Output depending on the used terminal and connected amplifier/receiver ( 26).
When connecting a TV ( 8) with HDMI AV OUT terminal, set HDMI Audio Output to Off ( 27). Set Digital Audio Output depending on the connected amplifier/receiver ( 26).

VQT2H86~Body_eng.fm 10

STEP 3 : Connecting to a broadband network
The following services can be used when this unit is connected to broadband. Firmware can be updated ( 14) You can enjoy BD-Live ( 18) You can enjoy VIERA CAST ( 22)

[BD65] [BD655]

For details about connection method, refer to the instructions supplied with the connected equipment.
Using LAN (ethernet) cable
Using Wireless LAN Adaptor DY-WL10 (optional)

Front of the unit

Pull to flip down the front panel. Wireless LAN Adaptor Broadband router, etc. LAN Cable
LAN Cable Wireless router (Access point), etc. LAN Cable
Modem (Broadband) *Provided by ISP
Use shielded LAN cables when connecting to peripheral devices. Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Only the Wireless LAN Adaptor DY-WL10 (optional) can be used. Read the operating instructions for the Wireless LAN Adaptor DY-WL10 (optional) thoroughly when using it. For up to date compatibility information on your Wireless router (Access Point) refer to http://panasonic.jp/support/global/cs/ For additional information about this unit refer to http://www.panasonic.com/consumer/support

VQT2H86~Body_eng.fm 11

STEP 4 : Connecting to an AC power
e.g. for U.S.A. and Canada
AC power supply cord (included)
To a household AC outlet [For[units[with[PX[printed[on[the[outer[packaging] If the power plug does not fit your AC outlet, use the power plug adaptor (included). If it still doesnt fit, contact an electrical parts distributor for assistance. This unit consumes a small amount of AC power (Quick Start: Off, [For[U.S.A.[and[Canada] approx. 0.1 W, [For[units[with[PX[printed[on[the[outer[packaging] approx. 0.2 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

When you experience problems with settings
Failed to connect to the access point. A conflict with another device occurred. Do you want to configure Access Point Connection Setting again ?
1. LAN cable connection or Connection to access point 2. IP address setting 3. Connection to gateway 1. LAN cable connection or Connection to access point 2. IP address setting 3. Connection to gateway
: Pass : Fail : Fail : Pass : Pass : Fail
Connection and settings of the hub and router Settings of IP Address/ DNS Settings ( 28)
Network Easy Setting (Internet Connection Check)
Complete. - Connection to the Internet

: Fail(Error code: B019)

Display A conflict with another device occurred.
Check the following Please wait a few moments, and then try again.
Failed the connection test. Cannot find the server.(Error code: B019) Please refer to the operating instructions for the cause of the error and the solution for it. Press [OK].
Setting of the Wireless router (Access point) for MAC Address etc. A time out error occurred. The signal may be weak. Using the USB extension cable included with the Wireless LAN Adaptor, adjust the position of the Wireless LAN Adaptor. An authentication error or a The SSID* and the encryption key of the time out error occurred. Wireless router (Access point). Please wait a few moments, and then try again. Connection of Wireless LAN Adaptor If there is no improvement in symptom, contact our Customer Service Center.
Display Cannot find the server. (Error code: B019)
Check the following Primary DNS and Secondary DNS settings of IP Address/ DNS Settings ( 28) The server may be busy or the service may have been suspended. Please wait a few moments, and then try again. Settings of Proxy Server Settings ( 28) and the router
Failed to connect to the server. (Error code: B020)

A device error occurred.

Complete. 1. LAN cable connection 2. IP address setting 3. Connection to gateway : Fail : Fail : Fail
LAN cable is not connected. Please check the connection. Select Yes and press [OK] to check network connection again. Select No and press [OK] to finish Network Easy Setting.
Refer to the operating instructions of the hub or router. You can perform this setup anytime by selecting Network Easy Setting in the Setup menu. ( 28) You can redo these settings individually using Network Settings. ( 28) Do not use this device to connect to any wireless network for which you do not have usage rights. During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access. After performing network settings on this unit, the settings (encryption level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router (Access point). * An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.

Display 1. LAN cable connection or Connection to access point 2. IP address setting 3. Connection to gateway : Fail : Fail : Fail
Check the following Connection of the LAN cables ( 10)

VQT2H86~Body_eng.fm 14

Firmware updates
Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.
STEP 6 : Reprogramming the remote control
For other Panasonic products
Change Remote Control Code ( 28) on the main unit and the remote control (the two must match) if you place other Panasonic products close together and it responds to this remote control.
[BD65] [BD655] : This unit is capable of checking the firmware automatically when a connected to the Internet via a broadband connection. When new firmware version is available, the following screen is displayed.

Firmware Update

Latest Online Version: x.xx Current Installed Version: x.xx Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.net/support/
For TV or amplifier/receiver
You can operate the TV or amplifier/receiver using the units remote control.

RETURN

For televisions
Input the code ( 37) with the numbered buttons while pressing [ TV POWER].

For amplifiers/receivers

If you use [BD45] or you use [BD65] and [BD655] but downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware. http://panasonic.jp/support/global/cs/ (This site is in English only.) To show the firmware version on this unit. ( 28, System Information) DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place. After the firmware is installed, FINISH will be displayed on the units display. Unit will restart and the following screen will be displayed.
The firmware was updated. Current Installed Version: x.xx
Input the code ( 37) with the numbered buttons while pressing [RECEIVER j VOL].
e.g., 0001: [0] [0] [0] [1]
Test by turning on the television or adjusting the volume of the amplifier/ receiver.
If your television or amplifier/receiver brand has more than one code listed, select the one that allows correct operation.
Firmware Update in the Setup menu. ( 28) Downloading will require several minutes. It may take longer or the Internet may not be connected depending on the connection environment. [BD65] [BD655] : If you do not want to check for the latest firmware version, set Automatic Update Check to Off. ( 28)

Depending on the played contents if you perform Screen Aspect, there may be not effect. When TV Aspect ( 27) is set to 4:3 Pan & Scan or 4:3 Letterbox, the Zoom effect in Screen Aspect is disabled.
Depending on the media and contents, displayed items are different.
DMP-BD65_45_VQT2H86_eng.book 18
Enjoying BD-Live [BD65] [BD655] or BONUSVIEW in BD-Video
What is BONUSVIEW? BONUSVIEW allows you to enjoy functions such as picture-in-picture or secondary audio etc. What is BD-Live? In addition to the BONUSVIEW function, BD-Live allows you to enjoy more functions such as subtitles, exclusive images and online games by connecting this unit to the Internet. The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.
Enjoying BD-Live discs with Internet
Some BD-Live content available on the Blu-ray discs may require an Internet account to be created in order to access the BD-Live content. Follow the screen display or instruction manual of the disc for information on acquiring an account.
Connect to the network. (
Insert an SD card (with 1 GB or more free space).
SD card is used as the local storage ( 38).

Insert the disc.

Playing picture-in-picture
To turn on/off secondary video
Deleting data/Formatting SD cards
Insert an SD card. Press [FUNCTION MENU]. Press [3, 4] to select Other Functions and press [OK]. Press [3, 4] to select Card Management and press [OK]. 5 Press [3, 4] to select BD-Video Data Erase or Format SD Card and press [OK].
Card Management SD card No. of Files 6 Free space 300 MB

Press [PIP].

Secondary video
BD-Video Data Erase Format SD Card
Primary video To turn on/off secondary audio
[DISPLAY] select Disc [1] select Signal Type [OK] set Soundtrack in Secondary Video to On or Off

OR [BD45] : Press

Format this SD Card.
6 Press [2, 1] to select Yes and press [OK]. 7 Press [2, 1] to select Start and press [OK].

[SECONDARY AUDIO].

To use the above functions, it is recommended that you format the card on this unit. If the SD card you use is formatted, all data on the card will be erased. It cannot be recovered. BD-Live Internet Access may need to be changed for certain discs ( 25). When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet.
During search/slow-motion or frame-by-frame, only the primary video is displayed. When BD-Video Secondary Audio in Digital Audio Output is set to Off, secondary audio will not be played ( 26).

Photo 11/12/2007

To exit the screen Press [STATUS].

VQT2H86~Body_eng.fm 20

Playing music

DVD CD

(DVD-R/-R DL, music CD, CD-R/RW, USB device)
Insert a disc or USB device.
Press [3, 4] to select the track and press [OK].
DIRECT NAVIGATOR CD No. 05 Music list 0.09 TrackTracks / Total Play Time 20min54sec Track Name Track1 Track2 Track3 Track4 Track5 Play Time 4min30sec 3min41sec 4min30sec 3min11sec 5min 2sec 4.30
indicates the track currently playing.
Playing a track in another folder
While the Music list is displayed
Press [SUB MENU]. Press [3, 4] to select Select Folder and press [OK].
You cannot select folders that contain no compatible tracks.

VQT2H86~Body_eng.fm 21

Linked operations with the TV
(VIERA LinkTM HDAVI ControlTM) What is VIERA Link HDAVI Control? VIERA LinkTM is a new name for EZ SyncTM. VIERA Link HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or amplifier/receiver under HDAVI Control. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.
Easy control only with VIERA remote control
Only TV supports HDAVI Control 2 or later By using the TV remote control, you can play discs using the Control Panel and display the Top Menu or Pop-up Menu, etc.
Control Panel Screen Aspect Top Menu Pop-up Menu
1 Set VIERA Link to On ( 27). (The default setting is On.) 2 Set the HDAVI Control operations on the connected equipment (e.g., TV). 3 Turn on all HDAVI Control compatible equipment and select this units input channel on the connected TV so that the HDAVI Control function works properly. Also when the connection or settings are changed, repeat this procedure.
The sub menu may not appear while the Top Menu for BD-Video or DVD-Video is displayed.
Automatic input switching Power on link
When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. When the television is off, the television will automatically turn on. When play starts on the unit When an action that uses the display screen is performed (e.g., Direct Navigator screen)
The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV. The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control. This unit supports HDAVI Control 5 function. HDAVI Control 5 is the newest standard (current as of December, 2009) for Panasonics HDAVI Control compatible equipment. This standard is compatible with Panasonics conventional HDAVI equipment. VIERA Link HDAVI Control, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed. Please refer to individual manuals for other manufacturers equipment supporting VIERA Link function.

Operable buttons: [3, 4, 2, 1], [OK], [RETURN], colored buttons, numbered buttons VIERA CAST Home screen;

New York, NY

Weather

COMING SOON

Featured Videos

Featured Photos

COMING SOON Top Movie Rental XXXXXX Top TV Show XXXXXX

Bloomberg TELEVISION

XXX XXX XXX

15min. delay

7465.95 -89.68 778.94 -9.47998 1442.82 -25.15
Images are for illustration purposes, contents may change without notice. To return to VIERA CAST Home screen Press [VIERA CAST]. To exit from VIERA CAST Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT NAVIGATOR].
DMP-BD65_45_VQT2H86_eng.book 23

Playback menu

Signal Type
Primary Video Video The recording method of original video appears. Select the type of audio or language.

Press [DISPLAY].

e.g., BD-Video
Disc Play Video Audio Signal Type Subtitle Subtitle Style

Soundtrack

Secondary Video Video Soundtrack Select on/off of images. The recording method of original video appears. Select on/off of audio and the language.
Press [3, 4] to select the menu and press [1]. Press [3, 4, 2, 1] to select the item and press [1]. Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
The recording method of original video appears.
Show or change the soundtrack.
To exit the screen Press [DISPLAY]. Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items that you cannot select or change. Regarding Language, Audio attribute and video attribute : ( 37)

Subtitle

Turn the subtitle on/off, and change the language depending on the media.

Subtitle Style

Select the subtitle style. Playback

Audio channel

Select the audio channel number. ( 17, Changing audio)
Select the number of the angle. Some items may be changed only on the disc specific menu. ( 16)
DMP-BD65_45_VQT2H86_eng.book 24

Repeat Play

(Only when the elapsed time is being displayed on the units display.) Select the item which you want to repeat. The items displayed differ depending on the type of media. Select Off to cancel.

Sound Effects*1, *2

Select the sound effect. Re-master : ( 17) Night Surround : Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily.

Random

Select whether or not to play random.

Dialog Enhancer*2

The volume of the center channel is raised to make dialog easier to hear.
Select the picture quality mode during play. If you select User, you can make further adjustments. Press [1] to select Picture Adjustment and press [OK].
3D NR: Reduces the rough noise in the background to give a greater feeling of depth. When 24p Output is set to On, this function may not operate. ( 27) Integrated NR: Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture.
Not every function can be set individually. This function is effective for audio from the HDMI terminal or the OPTICAL terminal only when Digital Audio Output is set to PCM ( 26). (However, in this case, audio is output as 2ch from the OPTICAL terminal.)

Detail Clarity

The picture is sharp and detailed.

Progressive

Select the method of conversion for progressive output to suit the type of material being played. When the content is distorted change the settings from Auto to Video.
Movies and other material recorded on DVD-Video at 24p are output at 24p. Only when you have selected On in 24p Output ( 27)
DMP-BD65_45_VQT2H86_eng.book 25

Setup menu

Change the units settings if necessary. The settings remain intact even if you switch the unit to standby.

DVD-Video Ratings

Set a ratings level to limit DVD-Video play. Follow the on-screen instructions. Enter a 4-digit password with the numbered buttons when the password screen is shown.
Press [FUNCTION MENU] and press [3, 4] to select Other Functions and press [OK]. Press [3, 4] to select Setup and press [OK].
Setup Disc Video Audio Display TV / Device Connection Network Others

BD-Video Ratings

Set an age limit of BD-Video play. Follow the on-screen instructions. Enter a 4-digit password with the numbered buttons when the password screen is shown.

Audio Language

REMOVE [BD65] [BD655]

The USB device is drawing too much power. Remove the USB device.

On the television

Cannot play.
You inserted an incompatible disc (Discs recorded in PAL video, etc.).
Cannot display on this unit.
You tried to play a non-compatible image. Confirm SD on the units display is not blinking and re-insert the card.
( stands for a number.) The remote control and main unit are using different codes. Change the code on the remote control. Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

No disc is inserted.

The disc may be upside down. $
The unit is hot. The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears. Select a position with good ventilation when installing the unit. Do not block the ventilation hole on the rear and side of the unit.
This operation is not available.
Some operations are unsupported by the unit. For example; BD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.
IP address is not set. [BD65] [BD655]
The IP Address in IP Address/DNS Settings is ---. ---. ---. ---. Set the IP Address, Subnet Mask, and Default Gateway. (Select the automatic address acquisition if necessary.)

U72 U73

The HDMI connection acts unusually. Turn the unit and TV off. Disconnect the HDMI cable between the player and the TV.

On the units display

The unit fails to operate properly. Press [POWER /I] on the main unit to switch the unit to standby for 3 seconds. Now press [POWER /I] on the main unit again to turn the unit on.

HDMI ONLY

Some BD-Video discs can only be output with HDMI.
( stands for a number.) There is something unusual. Check the unit using the troubleshooting guide. If the service number does not disappear, do the following. 1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it. 2 Press [POWER /I] to turn the power on. If the service number does not disappear despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.

H or F

NET [BD65] [BD655]
Displays while VIERA CAST is starting up.

START [BD65] [BD655]

The system is being restarted during the firmware update. Please do not turn off power.

No PLAY

There is a viewing restriction on a BD-Video or DVD-Video. ( 25)
( stands for a number.) The firmware is being updated. Please do not turn off power.

No READ

The media is dirty or badly scratched. The unit cannot play.

FINISH

Amplifier Code

Receiver Code
1308 / 0039 / 0367 / 1641 / 2001 / / / 0004 / 0273 / 1142 / / / 0189 / / 1077 / 1751 / / 1374 / 1495 / 1855 / / / 1269 / 0039 / 0189 / / 0380 / 1298 / / 1269 / 0189 / 0391 / 1120 / 1266 / / 0150 / 0244 / 0531 / 0630 / 1343 / / 1609 / 1254 / 0054 / 0530 / 0531 / 1074 / 1390 / 1622 / 0158 / 0168 / 0474 / 1367 / 1529 / 1658 / / 0186 / 1331
0308 Panasonic COBY DENON EMERSON HARMAN / KARDON INSIGNIA JVC LG MARANTZ ONKYO PHILIPS PIONEER 0823 RCA 0823 SAMSUNG 0815 / 1126 SONY 0354 YAMAHA

Video attribute

MPEG-2/MPEG-4 AVC/VC-1

Meaning

Video recording method

Audio attribute

LPCM/ Digital/ Digital+/ Signal type Number of channels Sampling frequency Number of bits TrueHD/DTS/DTS 96/DTS-HD HI RES/ DTS-HD MSTR/MPEG ch (channel) k (kHz) b (bit)
Gujarati: Hausa: Hebrew: Hindi: Hungarian: Icelandic: Indonesian: Interlingua: Irish: Italian: Japanese: Javanese: Kannada: Kashmiri: Kazakh: Kirghiz: Korean: Kurdish: Laotian: Latin: Latvian, Lettish: Lingala: Lithuanian: Macedonian: Malagasy: Malay: Malayalam: Maltese: Maori: Marathi: Moldavian: Mongolian: Nauru: Nepali: Norwegian: Oriya: Pashto, Pushto: Persian: Polish: Portuguese: Punjabi: Quechua:
DMP-BD65_45_VQT2H86_eng.book 38

Glossary

AVCHD AVCHD is a new format (standard) for high definition video cameras that can be used to record and play high-resolution HD images. BD-J Some BD-Video discs contain Java applications, and these applications are called BD-J. You can enjoy various interactive features in addition to playing normal video. Deep Color Deep Color is a name for device that can reproduce greater color gradation (4096 steps) when connected to a TV that supports the Deep Color with HDMI cable. You can enjoy exceptionally rich, natural-looking colors, with smooth, detailed gradation and minimal color banding. [A lower color gradation (256 steps), without Deep Color, will be reproduced if connected to a TV which does not support Deep Color. The unit will automatically set appropriate output to suit the connected TV.] Dolby Digital This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio. Dolby Digital Plus Multi-channel audio and higher audio quality is made possible using Dolby Digital Plus. BD-Video supports up to 7.1 channel output. Dolby TrueHD Dolby TrueHD is a very high quality audio format that reproduces the studio master audio. BD-Video supports up to 7.1 channel output. DTS (Digital Theater Systems) This surround system is used in many movie theaters. There is good separation between the channels, so realistic sound effects are possible. DTS-HD DTS-HD is a high-quality, sophisticated audio format used in movie theaters. Previous DTS Digital Surround-compatible equipment can play DTS-HD as DTS Digital Surround audio. BD-Video supports up to 7.1 channel output. DTS-HD High Resolution Audio This is a signal format achieved by improving the previous DTS, DTS-ES and DTS96/24 formats. It is compatible with sampling frequency 96 kHz/48 kHz. BD-Video supports up to 7.1 channel output. DTS-HD Master Audio This is a lossless audio format and compatible with 96 kHz/ 7.1ch or less. In addition, faithful reproduction of the master audio is enabled using lossless audio encoding technology. BD-Video supports up to 7.1 channel output. HDMI (High-Definition Multimedia Interface) HDMI is a digital interface for consumer electronic products. Unlike conventional connections, it transmits uncompressed digital video and audio signals on a single cable.

Local storage [BD65] [BD655] This storage area is used as a destination for sub contents for playing BD-Live on BD-Video. LPCM (Linear PCM) These are a kind of PCM format. These are uncompressed digital signals, similar to those found on CDs. P4HD (Pixel Precision Progressive Processing for HD) This is a processor which makes use of an exclusive Panasonic algorithm. Various processing is supported, including a high-level conversion of the TV scanning format from interlace to progressive and a high-level conversion of standard resolution (480i or 576i) video signal to a 1080 High Definition video signal. Consequently, this unit is able to provide video of optimal resolution to the connected TV. PCM (Pulse Code Modulation) This is one format for converting analog audio into digital audio, enabling you to enjoy digital audio with no hassle. x.v.ColorTM x.v.ColorTM is a name for devices that are compatible with the xvYCC format, an international standard for expanded color in motion pictures, and that follow the rules for signal transmission. You can enjoy vivid colors of wider color ranges for a more realistic picture when connected to a TV that supports the x.v.ColorTM with HDMI cable. 24p This is a progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.
DMP-BD65_45_VQT2H86_eng.book 39
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor.

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved. Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Advanced Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (AVC/VC-1 Video) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com. HDAVI ControlTM is a trademark of Panasonic Corporation. x.v.ColorTM is a trademark. VIERA LinkTM is a trademark of Panasonic Corporation. VIERA CASTTM is a trademark of Panasonic Corporation. EZ SyncTM is a trademark of Panasonic Corporation. AVCHD and the AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. SDXC Logo is a trademark of SD-3C, LLC. Blu-ray Disc is trademark. BD-LIVE logo is trademark of Blu-ray Disc Association. BONUSVIEW is trademark of Blu-ray Disc Association. YouTube and Picasa are trademarks of Google,Inc.
This product incorporates the following software: (1) the software developed independently by or for Panasonic Corporation, (2) the software owned by third party and licensed to Panasonic Corporation, (3) the software licensed under the GNU General Public License, Version 2 (GPL v2), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or, (5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1 For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://www.am-linux.jp/dl/JPRCBW98 The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1. Contact Information cdrequest@am-linux.jp Source code is also freely available to you and any other member of the public via our website below. http://www.am-linux.jp/dl/JPRCBW98

DY-WL10
Wireless LAN Adaptor for 2010 Blu-ray Disc Players
With the wireless LAN Adaptor plugged into the USB terminal, VIERA Cast and other online content can be enjoyed wirelessly by accessing your Wireless LAN router. With a high sensitivity receiving antenna, the connection will be stable. Now you can setup your Blu-ray Disc Player or home theater system freely without worrying about LAN cable wiring.

Features Overview

Enjoy Viera Cast and other online content wirelessly Compatible with DMP-BTD300, DMP-BD85, DMP-BD65, SC-BT737, SC-BT337 and SC-BT230 Also compatible with VIERA V20 and VT20 Series High Speed Dual Band Wireless-N Multi Direction & Wide Coverage Flexible Installation with 1m Cable Included Wi-Fi Certification for A, B, G and N

Technical Specs

Antenna Interface Standard Compliance Transmission System Frequency Range Transfer Rate (Standard) 1 Tx 1, Rx 2 USB 2.0 IEEE802.11n/ IEEE802.11a / IEEE802.11g/ IEEE802.11b MISO-OFDM System, OFDM System, DSSS System IEEE802.11n/ IEEE802.11a: 5.15GHz- 5.35GHz, 5.47GHz - 5.825GHzIEEE802.11g/ IEEE802.11b/ IEEE802.11n: 2.4GHz- 2.4835GHz IEEE802.11n: Tx Max 150Mbps, Rx Max 300Mbps IEEE802.11g/ IEEE802.11a: Max 54Mbps IEEE802.11b: Max 11Mbps Infrastructure Mode WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/ AES) WEP (64bit/ 128bit) DC5V (USB powered) 500mA Max. 2500mW 1.02 1-3/4 x 1-1/8 x 2-7/8

Access Mode Security

Power Supply [Approx.] Power Consumption [Approx.] Weight (oz) [Approx.] Dimensions (W x H x D) (inch) [Approx.]