Electric Double Layer Capacitors (Gold Capacitor)/ SD Stacked Coin Type

Series:

Features
Endurance : 70 C 1000 h RoHS directive compliant

Recommended Applications

Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers, intelligent remote controls

Specications

Category Temp. Range Maximum Operating Voltage Nominal Cap.Range Characteristics at Low Temperature Endurance Shelf Life 25 C to +70 C 5.5 V.DC 0.022 F to 0.33 F Capacitance change 30 % of initial measured value at +20 C (25 C to +70 C) Internal resistance <5 times of initial measured value at +20 C (at 25 C) After 1000 hours application of 5.5 V. DC at +70 C, the capacitor shall meet the following limits. Capacitance change 30 % of initial measured value Internal resistance <4 times of initial specied value After 1000 hours storage at +70C without load, the capacitor shall meet the specied limits for Endurance.
Dimensions in mm(not to scale)

Terminal: V Terminal: H

Sleeve 10.5 max. 11.5 max. A max. 0.2 0.05 0.80.05 (1.7) 3.00.5

10.5 max.

B max.

11.5 max.

5.00.8 + 10.00.5

0.20.05

0.80.05 (1.7)
Cap. (F) 0.022 to 0.22 0.33

B 5.0 5.5

Cap. (F) 0.022 to 0.1 0.22 0.33

A 5.5 6.0 6.5

Standard Products
Maximum Operating Voltage (V.DC) Capacitance (F) 0.022 0.047 0.10 0.22 0.33 Capacitance range (F) 0.0176 to 0.0396 0.0376 to 0.0846 0.080 to 0.180 0.176 to 0.396 0.264 to 0.594 Internal resistance () at 1kHz < 150 < 120 < 75 < 75 < 75 Part number EECS0HD EECS0HD EECS0HD EECS0HD EECS0HD 223( 473( 104( 224( 334( ) ) ) ) ) Min. Packaging Qty (pcs) 200
( ) Please use V or H, to indicate the terminal style. Note : Do not use reow soldering. (IR, Atmosphere heating methods, etc.) Please refer to P197 Mounting Specications.
Design and specications are each subject to change without notice. Ask factory for the current technical specications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.

3.00.5

Jan. 2008

Electric Double Layer Capacitors (Gold Capacitor)/ SE Stacked Coin Type

Series:

Features
Endurance : 70 C 1000 h Automatic insertion available RoHS directive compliant

Recommended Applications

Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers and intelligent remote controls.

Specications

Category Temp. Range Maximum Operating Voltage Nominal Cap.Range Characteristics at Low Temperature Endurance Shelf Life 25 C to +70 C 5.5 V.DC 0.022 F to 0.22 F Capacitance change 30 % of initial measured value at +20 C (25 C to +70 C) Internal resistance <5 times of initial measured value at +20 C (at 25 C) After 1000 hours application of 5.5 V. DC at +70 C, the capacitor shall meet the following limits. Capacitance change 30 % of initial measured value Internal resistance <4 times of initial specied value After 1000 hours storage at +70C without load, the capacitor shall meet the specied limits for Endurance.
Dimensions in mm(not to scale)
5.40.8 P2 13.0 max. P oh 10.5 max. oh1
Dimensions d P0 F W W0 W1 W2 H D0 P P1 P2 h, h1 H1
Nominal 0.55 12.7 5.0 18.0 5.5< 9.to 3.0 18.0 4.0 12.7 3.85 6.28.5<

Tolerance 0.05 0.2

+0.8 0.2

+ H W2 d

Expected dimensions of the capacitor above the board after soldering
0.5 0.5 0.5 0.2 1.0 0.50 1.00 1.0

Standard Products

Maximum Operating Voltage (V.DC) Capacitance (F) 0.022 0.047 0.10 0.22 Capacitance range (F) 0.0176 to 0.0396 0.0376 to 0.0846 0.080 to 0.180 0.176 to 0.396 Internal resistance () at 1kHz < 150 < 120 < 75 < 75 Part number EECSE0H223 EECSE0H473 EECSE0H104 EECSE0H224 Min. Packaging Qty (pcs) 1000 1000
Note: 1. When ordering please observe the minimum packaging quantity. 2. When the surface mount component goes through UV or a heat oven to afx the adhesive glue, the capacitors surface temperature should not exceed 100 C for more than 60 seconds (maximum temperature should not exceed 105 C) 3. Do not use reow soldering. (IR, Atmosphere heating methods, etc.) Please refer to P197 Mounting Specications.
Design and specications are each subject to change without notice. Ask factory for the current technical specications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately.

Jan. 2008