TERMS AND CONDITIONS

1. This machine is supplied with a one year return to base warranty. Please retain your Proof of Purchase and Packaging in the unlikely event that your machine should require attention. In addition to this return to base warranty, you can upgrade to a next day swop out service or an on site repair. For further information please contact us on or visit our web site at www.panasonic.co.uk This warranty is in addition to and does not in any way affect any statutory or other right of consumer purchases. This warranty relates only to product used within Mainland Great Britain, please refer to your dealer for warranty information relating to use elsewhere within the United Kingdom. This product is designed for use only on the United Kingdom and Irelands Public Switched Telephone Network and should be only for normal purposes and in accordance with standard operating instructions. You should complete the registration form overleaf and fax it to us within 7 days of purchase; failure to do so may result in a delay in providing warranty service. This warranty covers breakdowns due to design or manufacturing faults; it does not apply to damage, however caused, wear or tear, neglect, incorrect adjustment or repair, or to any items of limited life. This warranty does not cover consumables, i.e. ink films, film refills, ink cartridges, toner cartridges, drum units, paper and paper loads or any optional accessories which may have been purchased either at the same time, as or subsequent to, the main unit. Such accessories should be returned to the point of purchase if found to be faulty. In the event of a failure, please take the following action; a. b. Refer to the Help section of your instruction manual in order to identify and possibly correct the problem; If the problem is not resolved after referring to the user guide, please contact our customer helpline on for UK. For Republic of Ireland, please refer to your place of purchase.
In the event of our helpline being unable to resolve the problem, our operators will give you specific instructions on the return to base warranty procedure. You will be asked to return your facsimile machine to our workshop for repair. We will instruct you on how to package your machine carefully, as any damage caused by poor packaging will not be covered by the warranty. Where the product is found to be faulty as a result of unauthorised repairs, modifications or damage, either by accident, misuse or improper installation, then Panasonic reserve the right to charge the customer the actual cost of repair, at a price related to the market rate for such work.

To send to selected parties only once
You can also select the parties for each transmission. 1. Follow steps 1 and 2 above. 2. Press + or - until the following is displayed. Display: <ONE1TIME1BROAD> PRESS SET
To cancel the broadcast setting
1. Press { while the unit displays the following. Display:

@BROADCASTING

The display will show the following. SEND CANCELLED? YES:SET/NO:STOP
3. Press w to start programming the entries you want to transmit. DIR= [00] NAVI.[+ -]A&ASET 4. Press + or - until the desired entry you want to transmit is displayed. Example: 5. Press w. Example:

2. Press w.

Bill 6543210
DIR=Bill [01] SEND:PRESS SET
To program other entries, repeat steps 4 and 5 (up to 20 entries).
6. Press w to start transmission to the programmed entries.
KX-FP151/155(E)(036-039) 01.12.19 10:09 AM Page 36
Setting the unit to receive faxes!
Use as answering device and/or fax (KX-FP155 only) Use only as a fax

Hi, this. e

is Mik
How you want the unit to receive calls You want to receive all phone calls and faxes automatically. You have a separate telephone line just for faxes.

TAD/FAX mode (p. 48)

Turn AUTO ANSWER on by pressing PQ.

FAX ONLY mode (p. 39)

You have to set this.
The arrow (w) is shown on the right of the display.
This is how the unit will operate.
When receiving phone calls: The unit will activate the answering device and record voice messages. When receiving faxes: The unit will activate the fax function to receive documents.
When receiving calls: All incoming calls will be answered as faxes.
KX-FP151/155(E)(036-039) 01.12.19 10:09 AM Page 37
Use as telephone/ automatic fax

Fax receiving Phone call

Mostly phone calls

Other options

With answering machine (KX-FP151 only)
You can use the fax machine with an answering machine (p. 42, 43).
You want to answer the phone call yourself and receive faxes without rings.
You plan to answer the calls yourself.

Remote fax activation

You can also receive a fax using an extension telephone. While hearing a fax calling tone with an extension telephone, press

TEL/FAX mode (p. 40)

TEL mode (p. 38)
Turn AUTO ANSWER off by pressing PQ.
(pre-selected fax activation code) to receive a fax (p. 44).
The arrow (w) is not shown on the right of the display.
When receiving phone calls: The unit will ring. When receiving faxes: The unit will receive fax documents without ringing.
When receiving calls: You have to answer all calls manually. To receive a fax document, press j for each fax you are receiving.

KX-FP151/155(E)(036-039) 01.12.19 10:09 AM Page 38
TEL mode! (answering all calls manually)

Activating TEL mode

If the arrow (w) is shown on the right of the display, turn it off by pressing PQ. Display: TEL MODE
Turning the AUTO ANSWER mode on remotely
When you are not in, and the AUTO ANSWER mode of your unit is set to off (TEL mode), you can turn the AUTO ANSWER mode on from a remote location using a touch tone telephone.

Receiving a fax manually

When the unit rings, lift the handset. q You can press q (KX-FP151) / NO (KX-FP155). When: document reception is required, a fax calling tone (slow beep) is heard, or no sound is heard, press j. Display: CONNECTING..

AUTO ANSWER mode:

FAX only mode TEL/FAX mode TAD/FAX mode (KX-FP155 only) s For KX-FP151 1. Call your unit and wait for 10 rings. q You will hear a beep signal. 2. To switch to FAX ONLY mode: Press * within 8 seconds. To switch to TEL/FAX mode: Press # within 8 seconds. 3. Hang up the handset.
Replace the handset if you are using it. q The unit will start fax reception.
Up to 30 sheets of printed paper can be held. Remove the printed paper before it exceeds 30 sheets.

To stop receiving

Note: Press * or # within 8 seconds after hearing the beep, otherwise the call will be interrupted and the unit will remain in the TEL mode.
Friendly reception feature
When you answer a call and hear a fax calling tone (slow beep), the unit will automatically start fax reception. q If this feature is not required, set feature #46 to off (p. 66).

Fax reception in memory

When a printing problem is detected, the unit will temporarily store the received document into memory. While the document is in memory: the display will show an error message and the following alternately, FAX IN MEMORY Display: slow beeps will sound if feature #44 is set to on (p. 66). q Follow the instructions on pages 7173 to solve the problem. q For memory capacity, see page 81.
For KX-FP155 1. Call your unit and wait for 10 rings. q You will hear a beep signal. 2. Enter the remote operation ID (feature #11 on page 63) within 8 seconds. q You will hear a beep signal. 3. To switch to FAX ONLY mode: Press * within 3 seconds. To switch to TEL/FAX mode: Press # within 3 seconds. To switch to TAD/FAX mode: Wait for 3 seconds, then the greeting message will be played. 4. Hang up the handset.
Note: Enter the remote operation ID within 8 seconds after hearing the beep, otherwise the call will be interrupted and the unit will remain in TEL mode.
KX-FP151/155(E)(036-039) 01.12.19 10:09 AM Page 39
FAX ONLY mode! (all calls are received as faxes)

Activating FAX ONLY mode

Set feature #77 to FAX ONLY (p. 70).

If the arrow (w) is not shown on the right of the display, turn it on by pressing PQ. Display: FAX ONLY MODE !
When receiving calls, the unit will automatically answer all calls and only receive fax documents. AUTO ANSWER
The number of rings before a call is answered in FAX ONLY mode can be changed (feature #06 on page 62). q This mode should not be used with a telephone line which is used for both phone calls and faxes. Fax communication will be attempted even if someone is trying to call you. We recommend the following setup:

Line 1 Phone calls

Line 2 Faxes
Only a fax machine is connected.
KX-FP151/155(E)(040-047) 01.12.19 10:10 AM Page 40
TEL/FAX mode! (receiving phone calls with ring signals and faxes without ring signals when you are near the unit)
Use this mode when you are situated near the fax machine, and want to receive faxes without the unit ringing. When a call is received, the fax machine will work as follows. To set TEL/FAX mode, see below. A call is received.
The fax machine will not ring. Duration depends on TEL/FAX delayed ring setting. (See bottom of next page.)
This message will be played to the calling party (KX-FP155 only). Phone call
Hello! To send a fax, start transmission. To speak with someone, please wait.
The call is connected. Fax calling tone*
The fax machine will ring 3 times. Duration depends on silent fax recognition ring count (See bottom of next page.)

g Rin ing R ing R

The fax machine will automatically receive documents without ringing.
calling party will hear a different ring back tone.
Answer the call. q If the call is not answered, this message will be played (KX-FP155 only).**
* A fax calling tone is automatically generated by the sending fax machine. Some fax machines do not have this capability. ** You can record your own greeting message (p. 49) (KX-FP155 only).
No one is available to take your call right now. Please try again later. Thank you.

q Then

the fax machine will activate the fax function for a case in which the other partys fax machine does not send a fax calling tone.

To set TEL/FAX mode

1. Set feature #77 to TEL/FAX (p. 70). 2. If the arrow (w) is not shown on the right of the display, turn it on by pressing PQ. Display: w
The fax machine will display the following when a call is received. INCOMING CALL Display: The ringer should be on (p. 21).

KX-FP151/155(E)(040-047) 01.12.19 10:10 AM Page 43
How the fax machine and answering machine work
Receiving phone calls The answering machine will record voice messages automatically. Receiving faxes The fax machine will receive documents automatically when the machine detects a fax calling tone. Receiving a voice message and fax document in one call See below. Note:
Every time the fax machine receives a document, a silent pause or fax tone may be recorded on the answering machine.
Receiving a voice message and fax document in one call
The caller can leave a voice message and send a fax document during the same call. Inform the caller of the following procedure beforehand. 1. The caller calls your fax machine. q The answering machine will answer the call. 2. The caller can leave a message after the greeting message. 3. The caller presses *9 (pre-selected fax activation code). q The fax machine will activate the fax function. 4. The caller presses the start button to send a document. Note:
The fax activation code can be changed in feature #41 (p. 65).
KX-FP151/155(E)(040-047) 01.12.19 10:10 AM Page 44

Extension telephone!

If you use the fax machine with an extension telephone, you can receive fax documents using the extension telephone. You do not have to press j on the fax machine. Important: q Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
When the extension telephone rings, lift the handset of the extension telephone. When: document reception is required, a fax calling tone (slow beep) is heard, or no sound is heard, press *9 (pre-selected fax activation code) firmly. Hang up the handset. q The fax machine will start reception. To the EXT jack or the same line

Extension telephone

You can change the fax activation code in feature #41 (p. 65).
Receive polling! (retrieving a fax placed on another fax machine)
This feature allows you to retrieve a document from another compatible machine. Therefore you pay for the call. Make sure that no documents are fed into your unit and that the other partys machine is ready for your call.
Press p repeatedly until the following is displayed. POLLING Display: PRESS SET Press w.
Dial the fax number. Example: Press w. CONNECTING.. FAX=3331111 MENU SET

Remote command Skips the greeting message Repeats a message Skips a message New message playback All message playback

Page 54

Dial key *4 *83 84
Remote command Erases a specific message Erases all messages Changes to TEL mode Turns ON message transfer Turns OFF message transfer Turns ON pager call Turns OFF pager call

Page 55

Re-records a greeting message 55 Continues operation See note
Stops re-recording of a greeting 55 message
During remote operation, the unit will stop and two beeps will be heard in the following conditions: 2 minutes 40 seconds after your unit answered. Every 2 minutes 40 seconds after pressing any command key. To listen to further messages, press 8 within 10 seconds after hearing the two beeps.

Remote operation card

Please cut out and carry this card for assistance when using the remote operation.

Mailbox Remote Operation

Notice of Remote Operation
Recording a message in a mailbox: 1. Call your unit. 2. Press * and the mailbox no. (1 or 2). 3. Leave a message. Retrieving messages from a mailbox: 1. Call your unit. 2. Press * and the mailbox no. (1 or 2). 3. Enter the mailbox password. 4. Press the remote command key (see the reverse side). q 81, 82, 83 and 84 cannot be used.

Fold here

The remote operation is available only from a touch tone telephone when the unit is in TAD/FAX mode. q When the unit is in TEL mode, call your unit and wait for 10 rings. Enter the remote operation ID within 8 seconds and wait for 3 seconds. The unit will switch to TAD/FAX mode. q When you press a key, press firmly. q To send a document, press *9. When a fax tone is heard, start transmission.
KX-FP151/155(E)(053-060) 01.12.19 10:11 AM Page 54
Listening to recorded messages
Call your unit from a remote touch tone telephone.
Enter the remote operation ID during TAD/FAX greeting playback.
When there are new messages The voice guide will tell you the number of new messages and they will be played automatically.
When there are no new messages

No new messages.

Press 5 or wait for 4 seconds to listen to all the messages.
Voice guide example: 3 new messages.
repeat a message: Press 1. If you press 1 within 5 seconds of the beginning of a message, the previous message will be played. qTo skip a message: Press 2. qTo repeat only the new messages: Press 4. qTo listen to all the messages: Press 5.
When voice memory is full
Sorry, no more memory. Please erase unnecessary messages.
Erase some or all of the messages (p. 55).
Answering Device Remote Operation
1. Call your unit. 2. Enter the remote operation ID during the greeting message. q The new messages will be played automatically. q If there are no new messages, wait for 4 seconds. All the messages will be played back. 3. Press the remote command key(s) within 10 seconds. Key

See page 20 for details. (Up to 20 digits) ERROR: The sending report will be printed only when fax transmission fails. ON: The sending report will be printed out after every transmission. If you are using the unit with an answering machine, set to more than 4 (p. 42).

ERROR ON OFF

For KX-FP151 only: Changing the number of rings before the unit answers a call in FAX ONLY mode FAX RING COUNT RINGS=2 []
1, 2, 3, 4, 5, 6, 7, 8, 9
For KX-FP155 only: Changing the number of rings before the unit answers a call in TAD/FAX mode TAD RING COUNT RINGS=2 []
1, 2, 3, 4 TOLL SAVER RINGER OFF
This setting can be changed when the unit is in TAD/FAX mode. See page 48 for details.
For KX-FP155 only: Changing the number of rings before the unit answers a call in FAX ONLY mode FAX RING COUNT RINGS=2 []
This setting can be changed when the unit is in FAX ONLY mode. 1, 2, 3, 4, 5, 6, 7, 8, 9
(The default setting is in bold type.)
KX-FP151/155(E)(061-070) 01.12.19 10:04 AM Page 63
Feature & Display For KX-FP155 only: Changing the incoming message recording time RECORDING TIME =VOX []
Settings VOX 1, 2, 3, 4, 5 6, 7, 8, 9
How the unit operates VOX: Unlimited 19: 1 minute to 9 minutes
For KX-FP155 only: Setting the remote operation ID

REMOTE TAD ID [] =ON

ON / ID=111
To select ON and enter ID: 1. Press p. 2. Press ( or ) and select this feature. 3. Press + or - to select ON. 4. Press w. 5. Enter any 3-digit number except a number using 0 or 7. 6. Press w. 7. Press p. You can select the ringer pattern. The selected ringer pattern will sound during setting.
Setting the ringer pattern #17 RINGER PATTERN =A []
KX-FP151/155(E)(061-070) 01.12.19 10:04 AM Page 64

Advanced features!

1. Press p. 2. Press ( or ) until the following is displayed: ADVANCED MODE PRESS SET then press w and press ( or ) until the desired feature is displayed. 3. Press + or - until the desired setting is displayed. 4. Press w. 5. Press p. Note:
Code Feature & Display Setting the journal report to print automatically AUTO JOURNAL =ON [] Sending document overseas OVERSEAS MODE =OFF [] #23 If you have difficulty sending an overseas fax, activate this feature before starting transmission. This feature makes sending documents easier as the transmission speed is slowed down. Sending a fax at a specific time DELAYED SEND =OFF [] This feature allows you to take advantage of low-cost calling hours offered by your telephone company. q The setting can be reserved to take place up to 24 hours in advance. ON / fax no. / hh:mm ON Settings ON OFF After transmission, this feature will turn off automatically. q This feature is not available for broadcast transmission. q The calling charge may be higher. How the unit operates ON: The unit will print the journal report automatically after every 30 new fax communications (p. 31).

To send a document: 1. Insert the document. 2. Follow steps 1 and 2 above. 3. Press + or - to select ON. 4. Press w. 5. Enter the fax number. 6. Press w. 7. Enter the transmission start time. Press * to select AM or PM. 8. Press w. 9. Press p. q To cancel after programming, press { then w. ON: The unit will print the Caller ID list automatically after every 30 new calls (p. 25).
Setting the Caller ID list to print automatically AUTO CALL. LIST =ON []

ON OFF

KX-FP151/155(E)(061-070) 01.12.19 10:04 AM Page 65
Code Feature & Display Changing the number of rings when the unit detects a phone call in TEL/FAX mode (silent fax recognition ring setting) SILENT FAX RING RINGS=3 [] Setting the quick scan QUICK SCAN =OFF #34 ON [] ON: The unit will store the documents first and release them. q If the document exceeds the memory capacity (p. 81), sending/copying will be cancelled and this feature will be turned off automatically. Setting Recording paper Original document 100% 92% 92% 86% 72% 86%
How the unit operates See pages 40 and 41 for details.

3, 4, 5, 6, 7, 8, 9

To scan the document into memory before sending/copying. This is helpful when you want to remove the document for other uses. Receiving other size documents RCV REDUCTION =92% [] If the size of the document sent by the other party is as large as, or larger than the recording paper, the unit can reduce and print the document. Select the desired reduction rate.

A4 A4 A4 A4

Letter A4 A4 Legal
72% Changing the display contrast #39 LCD CONTRAST =NORMAL [] Changing the fax activation code FAX ACTIVATION =ON [] #41 If you use an extension telephone and wish to use it to receive a fax, activate this feature, and enter the code (p. 44). q This code is also used to receive a voice message and a fax in the same call (p. 43)(KX-FP151 only).
If most of document sent from the other party are as long as your recording paper and they have a long heading using a few lines, we recommend selecting 86%.

NORMAL DARKER

NORMAL: For normal contrast DARKER: Used when the display contrast is too light. 1. 2. 3. 4. Follow steps 1 and 2 on page 64. Press + or - to select ON. Press w. Enter your code from 2 to 4 digits, using 09 and :. 5. Press w. 6. Press p. q Do not enter 0000.

ON / CODE= ? 9

For KX-FP155 only: Setting the message alert MESSAGE ALERT =OFF [] To alert you with beeps when a new voice message is recorded.
If you hear slow beeps, press LM and listen to recorded messages (p. 52). The beeps will stop.
KX-FP151/155(E)(061-070) 01.12.19 10:04 AM Page 66

Receiving mode

I cannot select the desired receiving mode. q If you want to set TAD/FAX (KX-FP155 only), FAX ONLY or TEL/FAX mode: select the desired mode using feature #77 (p. 70), and press PQ to turn ON the arrow (w) located on the right of the display. Display:
you want to set TEL mode: press PQ to turn OFF the arrow (w) located on the right of the display.
The other party complains that they cannot send a document. q The unit is not in AUTO ANSWER mode. Press PQ to turn ON the arrow (w) located on the right of the display.
The unit does not make a copy. q You cannot make a copy during programming. Make the copy after programming or stop programming. A black line, a white line or a dirty pattern appears on the copied document. q The glass or rollers are dirty. Clean them (p. 79). The copied image is distorted. q The thermal head is dirty. Clean it (p. 79). (continued)
KX-FP151/155(E)(071-076) 01.12.19 10:05 AM Page 76

Copying (cont.)

The printing quality is poor. Original Copy I pressed the remote access code to access the answering machine remotely, but the line was disconnected. q The code may include # which is used for certain features provided by telephone companies. Change the code on the answering machine to another number which does not include #. Callers complain that they cannot send a document. q Your answering machine has run out of recording tape. Rewind the tape to record messages. q You set the answering machine to only give a greeting message.

q Some

paper has instructions recommending which side to print on. Try turning the paper over. q You may have used paper with a cotton and/or fibre content that is over 20%, such as letterhead or resume paper.
Using an answering machine (KX-FP151 only)
I cannot receive documents automatically. q Your greeting message on the answering machine is too long. Shorten the message (up to 10 seconds). q The answering machine rings too many times. Set to 1 or 2 rings. I cannot receive voice messages. q Check if the answering machine is turned on and connected to the fax machine properly (p. 42). q Set the number of rings on the answering machine to 1 or 2. (continued)

Answering device (KX-FP155 only)
I cannot retrieve recorded messages from a remote location. q Press the remote operation ID correctly and firmly (p. 54). Messages in the mailbox do not play back. q The mailbox password is wrong. Enter the correct password. For mailbox 1 password, see feature #51 on page 67. For mailbox 2 password, see feature #52 on page 67. The other party complains that they cannot leave a voice message. q The memory is full. Erase unnecessary messages (p. 52, 55, 58).
If a power failure occurs!
The unit will not function. The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. q Fax transmission and reception will be interrupted.
If the delayed transmission (feature #25 on page 64) is programmed and the start time is passed during a power failure, transmission will be attempted soon after power is restored. q If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will be printed out stating which contents in the memory have been erased.
KX-FP151/155(E)(077-079) 01.12.19 10:06 AM Page 77

Recording paper jam!

If the unit does not eject any recording paper during fax reception or copying, the recording paper has jammed and the display will show the following. PAPER1JAMMED Display:
Push the back cover open button (green) on the right side of the unit. OR Push the back cover open lever (green) inside of the unit. Back cover open button (green)
Back cover open lever (green)
Open the back cover. Back cover
Remove the jammed recording paper.

Jammed recording paper

KX-FP151/155(E)(077-079) 01.12.19 10:06 AM Page 78

Ink film Dotted area

Close the back cover securely by pushing down on the dotted area at both ends (#). Close the front cover securely ($).

2 Back cover Front cover

Document jams sending!
If the unit does not release the document during feeding, remove the jammed document as follows:
Open the front cover by pulling up the centre part. Remove the jammed document carefully. Centre part
Close the front cover securely.
Do not pull out the jammed paper forcibly before opening the front cover.
Front cover Jammed document
KX-FP151/155(E)(077-079) 01.12.19 10:06 AM Page 79

Cleaning

Document feeder!
If misfeeding occurs frequently or if dirty patterns or black bands appear on a transmitted document or on the original of a copied document, clean the document feeder. Disconnect the mains lead and the telephone line cord. Open the front cover by pulling up the centre part. Clean the document feeder rollers and rubber flap with a cloth moistened with isopropyl rubbing alcohol, and let all parts dry thoroughly. Clean the glass with a soft and dry cloth. Close the front cover securely. Connect the mains lead and the telephone line cord. Mains lead Document Rubber flap feeder rollers Centre part

Any details given in these instructions are subject to change without notice. q The pictures and illustrations in these instructions may vary slightly from the actual product.
Applicable lines: Document size: Effective scanning width: Effective printing width: Transmission time*:

ITU-T No. 1 Test Chart

KX-FP151/155(E)(080-088) 01.12.19 10:07 AM Page 82
s Paper specifications Recording paper size: A4: 210 mm x 297 mm Note: not use the following types of paper: Paper with a cotton and/or fibre content that is over 20%, such as letterhead paper or paper used for resumes. Extremely smooth or shiny paper, or paper that is highly textured. Coated, damaged or wrinkled paper. Paper with irregularities, such as tabs or staples. Paper which has dust, lint or oil stains. Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes, near 200 C, such as vellum paper. These materials may transfer onto the fusing roller and cause damage. Moist paper. q Some paper only accepts print on one side. Try using the other side of the paper if you are not happy with the print quality or if misfeeding occurs. q For proper feeding and best print quality, we recommend using long-grained paper. q Do not use paper of different types or thickness at the same time. This may cause a paper jam. q Avoid double-sided printing. q Do not use paper printed from this unit for double-sided printing with other copiers or printers. This may cause a paper jam. q To avoid curling, do not open paper packs until you are ready to use the paper. Store unused paper in the original packaging, in a cool and dry location.
KX-FP151/155(E)(080-088) 01.12.19 10:07 AM Page 83

Important Information

Important Information!
The connection to the telecommunication systems must not be hard wired and must be unplugged before the earth is disconnected. Method of connection This apparatus is connected to the exchange line or PABX/PMBX extension by the new standard British Telecom plug and socket. Arrangements for provision of this type of termination can be made through the nearest British Telecom Sales Office. This apparatus may be connected to the following types of installation. a) For connection to the public switched telephone network (PSTN) and compatible (Private Branch Exchange), which use DTMF signalling. (Please consult your supplier for an up to date list of compatible PBXs.) b) The apparatus can be used on extension sockets connected to a direct exchange line (D.E.L.). c) This apparatus is suitable for connection to the telecommunication system directly or via compatible private branch exchange as an extension. The supplier of the apparatus should be consulted for an up to date list of PBXs with which the apparatus is compatible. It cannot be guaranteed that the apparatus will operate under all possible conditions of connection to compatible PBXs. q This apparatus is suitable for connection to a PBX with or without initial proceed indication. q This apparatus is suitable for connection to a PBX with or without secondary proceed indication. Any cases of difficulty should be referred in the first instance to the supplier of the apparatus. d) The apparatus must not be connected in the following manner: As an extension to a pay phone As a party line with shared service NOTES: you experience any problems with the normal use of your apparatus, you should unplug it from the telephone outlet and connect a known working telephone in its place. If the known working telephone still gives problems, then please contact the customer service department of your PSTN operator (e.g. BT etc.). If it operates properly, then the problems are likely to be a fault in your apparatus. In this case, consult your supplier for advice. q Your PSTN operator may charge you if they attend a service call that is not due to apparatus supplied by them.

KX-FP151/155(E)(080-088) 01.12.19 10:07 AM Page 84
Fitting a plug to the mains lead!
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for ASTA mark mark or the BSI IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Green-and-Yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured GREEN-ANDYELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with letter L or coloured RED. How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse (and fuse cover).

on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician. WARNING: THIS APPLIANCE MUST BE EARTHED.
KX-FP151/155(E)(080-088) 01.12.19 10:07 AM Page 85

Guarantee

Condition of guarantee!

This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. 1. The appliance shall have been purchased and used solely within the UK and in accordance with standard operating instructions and the technical and/or Safety Standards required in the UK. 2. The purchaser will within 7 days of purchase complete the included warranty registration form (folded inside front cover) and fax it to us for registration. Failure to return such a form could result in delay in providing the guarantee service. 3. The appliance should be returned together with this guarantee and proof of date of purchase promptly on being found defective at the purchasers risk and expense to the authorised dealer from whom the appliance was purchased or to the nearest authorised dealer. All enquiries must be through such dealers. 4. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse, wear and tear, neglect, incorrect adjustment or repair, to damage caused through installation, adaption, modification or use in an improper manner or inconsistent with the technical and/or safety standards required in the country where this appliance is used, or to damage occurred during transit to or from the purchaser. 5. If at any time during the guarantee period any part or parts of the appliance are replaced with a part or parts not supplied or approved by us or of an objective quality safe and suitable for the appliance, or the appliance has been dismantled or repaired by any person not authorised by us, we shall have the right to terminate this guarantee in whole or in part immediately without further notice. 6. The purchasers sole and exclusive remedy under this guarantee against us is for the repair or replacement of the appliance or any defective part or parts and no other remedy, including, but not limited to, incidental or consequential damage or loss of whatsoever nature shall be available to the purchaser. 7. This guarantee shall not apply to cassette tapes, batteries and any other items of limited nature life. 8. Our decision on all matters relating to complaints shall be final. Any appliance or defective part which has been replaced shall become our property. 9. The guarantee period applicable to this product shall be 12 months from the date of purchase. Please keep these Operating Instructions with your receipt.