Reviews & Opinions
Independent and trusted. Read before buy Panasonic KX-MB773EX!

Panasonic KX-MB773EX

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic KX-MB773EX, size: 7.0 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic KX-MB773EXAbout Panasonic KX-MB773EX
Here you can find all about Panasonic KX-MB773EX like manual and other informations. For example: review.

Panasonic KX-MB773EX manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic KX-MB773EX please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Panasonic KX-MB773EX photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 8. Page 1 of 1. Average Rating:
davidgwhitman 3:16pm on Thursday, September 30th, 2010 
Don't take the risk of brain tumors - use a corded headset. 4 ft cord","Clear Reception","Durable","Excellent sound quality". Unfortunately, I have 4 slipped disks in my neck for which the pain radiates down my arm and into my hand.
ramboid 10:13am on Saturday, July 31st, 2010 
Just bought 2 more of these. The first broke after 4 years but I like them so much I keep buying. Very clear on both ends. Keeps one ear free.
ridgeway 5:21am on Friday, July 9th, 2010 
Great quality ; low price ; comfortable ; Clear sound ; Loud for the person on the other end :D Maybe too loud.. :P Great quality and price. Works with all my wireless and wired phones that have a 2.5 mm jack Shipping cost
dth 12:32am on Friday, July 9th, 2010 
I would not buy a Panasonic KX-TCA60 Headset again. I expect phone headsets to last longer than five months before failing like this one did.
fi85511 12:27pm on Thursday, June 24th, 2010 
Great for high noise area's Clear Reception","Durable","Easy Controls Works like a charm. Clear Reception None
Cybb20 7:27am on Sunday, May 23rd, 2010 
Excellent headset Great sound quality with my Panasonic cordless phone. I had one before but broke it putting it on over my baseball cap. cordless phone headset this is an excellent headset for the price.
OceanaRose 3:56am on Saturday, April 10th, 2010 
This is not a PC headset, it works great with my AT&T 2-line desk phone. Slips on easily, ear piece is comfortable. I have had very good luck with most Panasonic products (vs SONY, which for me.
realdoogie 4:43pm on Wednesday, March 31st, 2010 
I purchased 6 of these for my technicians to use. Hands free operation in a noisy environment while they walk, climb ladders and use hand tools. Love this headset! It is super comfortable and makes it so easy to be on the phone while getting other things done... Bought this headset last week. Very happy so far. Clear Reception","Durable

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Installation Place the unit securely on a stable levelled surface. Serious damage and/or injury may result if the unit falls. To prevent the risk of fire or electrical shock, do not expose this product to rain or any type of moisture.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 4 Monday, August 6, 2007 11:42 AM
Make sure that the unit is installed in a well ventilated room so as not to increase density of ozone in the air. Since ozone is heavier than air, it is recommended that air at floor level be ventilated. Operating safeguards Unplug this unit from power outlets before cleaning. Do not use liquid or aerosol cleaners. Do not cover slots and openings on the unit. They are provided for ventilation and protection against overheating. Never place the unit near radiators, or in a place where proper ventilation is not provided. Never push any objects through slots in this unit. This may result in the risk of fire or electric shock. Never spill any liquid on the unit. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorised service centre when service is required. Opening or removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used. Follow all warnings and instructions marked on this unit. Unplug this unit from power outlets and refer servicing to an authorised service centre when the following conditions occur: L If the power cord is damaged or frayed. L If liquid has been spilled into the unit. L If the unit has been exposed to rain or water. L If the unit does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorised service centre. L If the unit has been dropped or physically damaged. L If the unit exhibits a distinct change in performance.
Installation and relocation After moving the unit from cold areas to warmer areas, let the unit adjust to the warmer temperature and do not connect the unit for about 30 minutes. If the unit is connected too soon after a sudden climate change, condensation may form inside the unit causing malfunction. Never install telephone wiring during a lightning storm (KX-MB773/KX-MB783 only). Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations (KX-MB773/KXMB783 only). Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface (KX-MB773/KX-MB783 only). Use caution when installing or modifying telephone lines (KX-MB773/KX-MB783 only).
Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use (KXMB773/KX-MB783 only).

5. Copier

5.1 5.2 Making a copy.. 36 More copying features.. 37
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 9 Monday, August 6, 2007 11:42 AM

10.Useful Information

Useful Information
10.1 Character entry (KX-MB773/KX-MB783 only)... 68 10.2 Status of the unit... 69 10.3 Cancelling the operations.. 69

11.Help

Error Messages
11.1 Error messages Reports (KX-MB773/KXMB783 only).. 71 11.2 Error messages Display.. 72

Troubleshooting

11.3 When a function does not work. 74

12.Paper Jams

12.1 Recording paper jam.. 82 12.2 Document jams (Auto document feeder) (KXMB773/KX-MB783 only).. 87

13.Cleaning

Cleaning
13.1 Cleaning the white plates and glass. 88 13.2 Cleaning the document feeder rollers (KXMB773/KX-MB783 only).. 91

14.General Information

Printed Reports
14.1 Reference lists and reports.. 92

Specifications

14.2 Specifications... 92

Copyrights

14.3 Information of copyrights and licences (KXMB783 only).. 95

15.Index

15.1 Index.. 102
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 10 Monday, August 6, 2007 11:42 AM
Accessories 1 Introduction and Installation

1.1 Included accessories

1 Power cord 2 CD-ROM
*1 Prints about 500 A4-sized pages with a 5 % image area (page 94). Note: L Save the original carton and packing materials for future shipping and transportation of the unit.

3 Drum unit

4 Starter toner cartridge*1
5 Operating instructions (English only)
6 KX-MB263HX/ KX-MB773EX/ KX-MB783EX only Quick reference guide
7 Quick installation guide 8 KX-MB773/KX-MB783 only Telephone line cord
9 KX-MB773/KX-MB783 j KX-MB773/KX-MB783 only only Handset Handset cord
k KX-MB773/KX-MB783 only Handset cradle
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 11 Monday, August 6, 2007 11:42 AM
1.2 Accessory information
To ensure that the unit operates properly, we recommend the use of a Panasonic toner cartridge and drum unit. See page 94 for specifications.

1.3 Button descriptions

A B CDEFG HIJK L
1.2.1 Available accessories
Replacement toner cartridge*1 L Model No. (Part No.): KX-FAT92E/KX-FAT92X Replacement drum unit L Model No. (Part No.): KX-FAD93E/KX-FAD93X *1 Approx. 2,000 sheets of A4 size paper can be printed with KX-FAT92E/KX-FAT92X.

4 Press {MENU} to exit. 5 Install Multi-Function Station on the computer that
you want to use it with. See page 28 for details. To correct a mistake in the IP address, subnet mask, or default gateway Press {<} or {>} to move the cursor to the incorrect number, and make the correction.
1 After connecting the LAN cable to the unit and the
computer, connect the power cord. L The IP address, subnet mask, and default gateway will be set automatically.
2.10.3 Setting the computer for PC fax reception
You need to select the computer that will be used for receiving faxes. L Make sure PC fax setting is turned ON beforehand (feature #442 on page 61).
2 Install Multi-Function Station on the computer that
you want to use it with. See page 28 for details. Note: L You can connect two or more units and assign IP addresses automatically with a DHCP server, but we recommend assigning static IP addresses manually for each unit to avoid unnecessary trouble.
1 {MENU} i {#}{4}{4}{3} i {SET} 2 Press {V} or {^} repeatedly to select the desired

computer. i {SET}

2.10.2 Setting up manually
Your situation: When your network administrator does not manage the network with a DHCP server. When two or more units are connected to the LAN. You need to assign an IP address, subnet mask, and default gateway manually.
Note: L If the unit is not connected to the LAN, the computer connected to the unit by USB is assigned as the computer for PC fax reception. L To select the desired computer easily, change the PC name beforehand (page 30).

1 {MENU} i {#}{5}{0}{0}

DHCP =ENABLED [V^]
2 Press {0} to select DISABLED i {SET} 3 Set each item.
For the IP address: 1. Press {5}{0}{1}. IP ADDRESS PRESS SET 2. {SET} i Enter the IP address of the unit. i {SET}
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 28 Monday, August 6, 2007 11:42 AM
2. Preparation 2.11.2 Installing Multi-Function Station on a computer
L Install Multi-Function Station (CD-ROM) before connecting the unit to a computer with USB cable. If the unit is connected to a computer with USB cable before installing Multi-Function Station, the [Found New Hardware Wizard] dialogue box will appear. Click [Cancel] to close it. L The screenshots shown in these instructions are for Windows XP and are included for reference only. L The screenshots shown in these instructions may differ slightly from those of the actual product. L Software features and appearance are subject to change without notice.

5 The [Connect Type] dialogue box appears.
For USB connection: 1. [Connect directly with a USB cable.] i [Next] L The [Connect Device] dialogue box will appear.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 29 Monday, August 6, 2007 11:42 AM
2. Connect the unit with the USB cable (1), then click [Next]. L Adobe Reader is required to view them. Note: L If the screen prompts to insert the CD-ROM for the operating system when installing Multi-Function Station, insert it into your CD-ROM drive. L If you install the operating instructions, you can view it anytime from [o] on the Multi-Function Station launcher. To use another unit with the computer You need to add the printer driver for each unit, as follows. [Start] i [All Programs] or [Programs] i [Panasonic] i the units name i [Add Printer Driver]. Then follow the on-screen instructions. Note: L You cannot connect more than one unit to the same computer at the same time. To modify the software You can select the components to install anytime after the installation. For Windows 2000, Windows XP and Windows Vista users, you must be logged in as an administrator in order to modify Multi-Function Station. 1. Start Windows and insert the included CD-ROM into your CD-ROM drive. 2. [Start] i [All Programs] or [Programs] i [Panasonic] i the units name i [Uninstall or Modify] i [Modify] i [Next]. Then follow the on-screen instructions. To uninstall the software For Windows 2000, Windows XP and Windows Vista users, you must be logged in as an administrator in order to uninstall Multi-Function Station. 1. [Start] i [All Programs] or [Programs] i [Panasonic] i the units name i [Uninstall or Modify] 2. [Uninstall] i [Next]. Then follow the on-screen instructions. Note: L If you want to uninstall each component, select [Modify] and click [Next] in step 2. Then follow the on-screen instructions.
* The pictured model is KX-MB783. L If the unit is connected to your computer, the model name will be automatically detected. L You can change the name of the unit if necessary. 3. Click [Install], then follow the on-screen instructions. L The files will be copied to your computer. For LAN connection (KX-MB783 only): 1. [Connect via the Network.] i [Next] L The [Select a Network Device] dialogue box will appear. 2. Check [Select in the searched list] and select the unit from the list. L If the name of the desired unit is not displayed on the list, and the IP address for the unit has been assigned, check [Direct input] and enter the IP address. 3. [Next] L You can change the name of the unit if necessary. 4. Click [Install], then follow the on-screen instructions. L The files will be copied to your computer. Important notice If you use Windows XP or Windows Vista, a message may appear after connecting the unit with the USB cable. This is normal and the software will not cause any difficulties with your operating system. You can continue the installation with no problem. This kind of message is displayed: L For Windows XP users The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP. L For Windows Vista users Would you like to install this device software? To view or install the operating instructions in the CD-ROM 1. Start Windows and insert the included CD-ROM into your CD-ROM drive. 2. Click [Operating Instructions], then follow the onscreen instructions to view or install the operating instructions in PDF format.

3. Printer 3.1.1 Using the manual input tray
You can print on plain paper and labels. The manual input tray is used only for printing with the computer and can hold one page at a time. When printing multiple pages, add a next page after the first page has been fed into the unit. L Please refer to page 93 for information on recording paper. Load the recording paper after you have started printing with the computer. Any sheet of labels that has spaces in it where some of the labels have been removed. Labels that do not completely cover the backing sheet as follows.
1 Adjust the width of the guides (1) to the size of the

recording paper.

2 Insert the paper, print-side down (2) until the unit
grasps the paper and a single beep is heard.
Note: L If the paper is not inserted correctly, re-adjust the paper, or the paper may jam. L Make sure the unit grasps the recording paper as specified in step 2. The display shows the following. PAPER IN TRAY #2 FOR PC PRINTING L To use the manual input tray, you must change the paper source in the [Basic] tab when setting the printer properties (page 31). You can also select the desired media type. To print on labels Use labels designed for laser printing. We recommend the following: Avery 5160/5161/5162/5163/5164/5165/5167/5168 XEROX LWH100/LWH110/LWH120/LWH130/LWH140 L Use the manual input tray to print labels. L Load label sheets one page at a time for printing, print-side down. L Remove each label after printing. L Do not use the following types of labels: Labels that are wrinkled, damaged or separated from the backing sheet.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 33 Monday, August 6, 2007 11:42 AM

Scanner 4 Scanner

5 If necessary, change the scanning settings (scan
type / resolution / file format / brightness / contrast / scan size). Press {>}, press {V} or {^} repeatedly to select the desired setting. i {SET} i {START} L The scanned image will be displayed in the [Multi-Function Viewer] window after scanning. However, when you select PDF as a file format, the software that is associated to open PDF file will start. Note: L To stop scanning, see page 69. L You can save the images in TIFF, JPEG, BMP or PDF formats. L See page 23 for document requirements.
4.1 Scanning from the unit (Push Scan)
You can easily scan the document by operating the operation panel on the unit. Select following scanning modes depending on the way to use the scanned image. Viewing using Multi-Function Viewer (Viewer) Saving as a file to your computer (File) Sending as an attached file to e-mail destination (EMail) Using OCR software (OCR) Note: L You can set the desired scan mode for push scan beforehand (feature #493 on page 64). L The scanned image will be automatically saved in the folder selected by [Settings] window. L When scanning a document, we recommend using the scanner glass rather than the auto document feeder for better results (KX-MB773/KX-MB783 only). L Do not open the document cover when scanning a document with the auto document feeder (KXMB773/KX-MB783 only).

MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 50 Monday, August 6, 2007 11:42 AM
L The number of rings is determined by the Silent fax recognition ring setting (feature #436 on page 61). L Callers will hear a ring back tone different from the one generated by the telephone company. L When you answer the call using an extension telephone connected to the [EXT] jack, press {STOP} on the unit to talk to the calling party. B If you do not answer the call, the unit will activate the fax function. L Some fax machines do not generate fax calling tones when sending faxes, therefore the unit will try to receive a fax even if no fax calling tone is detected.
7.8 Using the unit with an answering machine
7.8.1 Setting up the unit and an answering machine 1 Connect the answering machine (1).
L Answering machine is not included. L Remove the stopper (2) if attached.
* The pictured model is KX-MB773.
2 Set the number of rings on the answering machine to
4 rings or less. L This will allow the answering machine to answer the call first.
3 Record a greeting message on the answering
machine. L We recommend you record a message up to 10 seconds long, and not to pause for more than 4 seconds during the message. Otherwise, both machines will not function correctly.
4 Activate the answering machine. 5 Set the unit to the desired receiving mode (page 48).
L If you set to FAX ONLY mode, change the ring setting in FAX ONLY mode to more than 4 (feature #210 on page 57).
6 Make sure each of the following are unique:
the remote access code of the answering machine the fax activation code (feature #434 on page 61)
Note: L If the call is a phone call, the answering machine will record voice messages.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 51 Monday, August 6, 2007 11:42 AM
If a fax calling tone is detected, the fax machine will receive a fax automatically. L Regarding the remote access code for the answering machine, see the operating instructions of the answering machine. Receiving a voice message and fax document in one call The caller can leave a voice message and send a fax document during the same call. Inform the caller of the following procedure beforehand. 1. The caller calls your unit. L The answering device will answer the call. 2. The caller can leave a message after the greeting message. 3. The caller presses {*}{#}{9} (pre-selected fax activation code). L The unit will activate the fax function. 4. The caller presses the start button to send a document. Note: L To use this feature, make sure remote fax activation is turned ON (feature #434 on page 61). The fax activation code can also be changed. L If there is no room left in the memory of your answering machine, the unit may not be able to receive documents. See the operating instructions of the answering machine and erase unnecessary messages.

Receiving a fax into the computer {#}{4}{4}{2}
Setting the computer for PC fax reception {#}{4}{4}{3} (KX-MB783 only)
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 62 Monday, August 6, 2007 11:42 AM
Feature/Code Resetting fax features to their default settings {#}{4}{5}{9} Selection {0} NO (default) {1} YES To reset the fax features: 1. {MENU} i {#}{4}{5}{9} 2. Press {1} to select YES. i {SET} i {SET} i {MENU} Note: L The PC fax reception (feature #443 on page 27) will not be reset.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 63 Monday, August 6, 2007 11:42 AM

9.4 Copy features

Feature/Code Changing the default copy resolution {#}{4}{6}{1} Holding the previous page layout setting {#}{4}{6}{7} Holding the previous zoom (enlargement / reduction) setting {#}{4}{6}{8} Holding the previous collate setting {#}{4}{6}{9} Selection To change the default resolution setting for copying. {1} TEXT/PHOTO: For documents containing both text and photographs. {2} TEXT (default): For documents containing only text. {3} PHOTO: For documents containing photographs, shaded drawings, etc. {0} DISABLED (default): Deactivates this feature. {1} ENABLED: The unit will hold the previous setting. {0} DISABLED (default): Deactivates this feature. {1} ENABLED: The unit will hold the previous setting.
{0} DISABLED (default): Deactivates this feature. {1} ENABLED: The unit will hold the previous setting.

9.5 PC print features

Feature/Code Changing the data timeout setting {#}{7}{7}{4} Selection The unit will automatically print the remaining data in memory when the computer does not send data to the unit during the set time. 1. {MENU} i {#}{7}{7}{4} i {SET} 2. Enter the desired data timeout setting from 005 seconds to 600 seconds, using the dial keypad. L The default setting is 060 seconds. 3. {SET} i {MENU}
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 64 Monday, August 6, 2007 11:42 AM

9.6 Scan features

Feature/Code Setting the scan mode for Push Scan {#}{4}{9}{3} Selection {1} VIEWER (default): The scanned image will be displayed in the [MultiFunction Viewer] window. {2} FILE: The scanned image will be saved as a file. {3} E-MAIL: The scanned image will be saved for e-mail attachment. {4} OCR: The scanned image will be displayed in the OCR window. {0} DISABLED (default): Deactivates this feature. {1} ENABLED: The unit will hold the previous scan settings for each mode of push scan; scan type, resolution, file format, brightness, contrast, scan size. This feature can be programmed only by the web browser (page 67).
Holding the previous scanning parameter for Push Scan {#}{4}{9}{4} SMTP setting for scan to email (via e-mail server) (KXMB783, LAN connection only) Registering the scan to e-mail destinations (via e-mail server) (KX-MB783, LAN connection only) L This feature can be programmed only by the web browser.

When you send scanned files via e-mail server, you can register e-mail destinations (up to 30 destinations) to the unit using the web browser in advance. 1. Start Multi-Function Station. 2. [Utilities] i [Embedded Web] i [Device Configuration] 3. Type root as the user name, then enter the password (feature #155 on page 57). i [OK] 4. Select the [SCAN FEATURE] tab. 5. Click [Edit] next to [SCAN TO E-MAIL]. 6. Click [Edit] next to the desired scan to e-mail user. 7. Enter name and e-mail address, and then select the station key number from the drop-down list if necessary. i [Submit] 8. Close the web browser.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 65 Monday, August 6, 2007 11:42 AM
9.7 LAN features (KX-MB783 only)
Feature/Code LAN setting with a DHCP server {#}{5}{0}{0} Selection {0} DISABLED: Deactivates this feature. {1} ENABLED (default): The following will be allocated automatically using a DHCP (Dynamic Host Configuration Protocol) server. IP address Subnet mask Default gateway This feature is available when feature #500 is deactivated. 1. {MENU} i {#}{5}{0}{1} i {SET} 2. Enter the IP address of the unit on the LAN using the dial keypad. i {SET} i {MENU} This feature is available when feature #500 is deactivated. 1. {MENU} i {#}{5}{0}{2} i {SET} 2. Enter the subnet mask of the network on the LAN using the dial keypad. i {SET} i {MENU} This feature is available when feature #500 is deactivated. 1. {MENU} i {#}{5}{0}{3} i {SET} 2. Enter the default gateway of the network on the LAN using the dial keypad. i {SET} i {MENU} This feature is available when feature #500 is deactivated. 1. {MENU} i {#}{5}{0}{4} i {SET} 2. Enter the primary DNS server of the network on the LAN using the dial keypad. i {SET} i {MENU} This feature is available when feature #500 is deactivated. 1. {MENU} i {#}{5}{0}{5} i {SET} 2. Enter the secondary DNS server of the network on the LAN using the dial keypad. i {SET} i {MENU} 1. {MENU} i {#}{5}{0}{7} i {SET} 2. Enter the name of the unit to recognize on the LAN, up to 15 characters (see page 68 for character entry). i {SET} i {MENU} Note: L In order to recognize the unit on the LAN, the default name of the unit is assigned automatically. If you change the name, assign the unique name to avoid overlapping. Displaying the MAC address of the unit {#}{5}{0}{8} Approving users for the LAN connection {#}{5}{3}{2} Setting the IP address automatically for the LAN connection {#}{5}{3}{3} 1. {MENU} i {#}{5}{0}{8} i {SET} 2. The MAC address of the unit will be displayed. i {MENU} {0} DISABLED (default): Deactivates this feature. {1} ENABLED: The unit will deny/approve access from the pre-programmed IP patterns. Whether to deny or approve, and up to 4 patterns can be programmed using the web browser (page 55). This feature is available when feature #500 is activated. {0} DISABLED (default): Deactivates this feature. {1} ENABLED: IP address will be allocated automatically without using a DHCP (Dynamic Host Configuration Protocol) server.

MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 68 Monday, August 6, 2007 11:42 AM

10. Useful Information

Useful Information 10 Useful Information
10.1 Character entry (KXMB773/KX-MB783 only)
The dial keypad is used to enter characters and numbers. Press {<} or {>} to move the cursor. Press dial keys to enter characters and numbers. Press {STOP} to erase the character or number highlighted by the cursor. Press and hold {STOP} to erase all characters or numbers. To enter another character located on the same dial key, press {>} to move the cursor to the next space, then press the appropriate dial key. Keypad {1} Characters 1 / {2}. _ ` [ : ] ; { ? } | +
1. Press {V} repeatedly to display the desired character. Characters will be displayed in the following order: 1 Uppercase letters 2 Number 3 Symbol 4 Lowercase letters L If you press {^}, the order will be reversed. 2. Press {>} to insert the displayed character. 3. Return to step 1 to enter the next character.

A B C 2 a b c 2

D E F 3 d e f 5

G H I g h i

K L k l

M N O 6 m n o 6

P Q R S 7 p q r s 7

T U V 8 t u v 8

W X Y Z 9 w x y z ) 9 < @ > ^ ! " #

% &

{*} {RECALL} {ZOOM} {STOP}
To switch between uppercase or lowercase letters. Hyphen To insert a space. To delete a character.
To select characters using {V} or {^} Instead of pressing the dial keys, you can select characters using {V} or {^}.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 69 Monday, August 6, 2007 11:42 AM
10. Useful Information 10.2.2 Using Device Monitor
You can confirm the setting information and current status of the unit from your computer.

10.2 Status of the unit

10.2.1 Using Remote Control
You can easily operate the following functions from your computer. Programming the features (page 56) KX-MB773/KX-MB783 only Storing, editing or erasing items in directories (page 41) Storing or erasing items for broadcast transmission (page 45) Viewing items in the journal report (page 44) Storing the journal report as the computer file Viewing items in the Caller ID list (page 53) Storing caller information into directories (page 54) Storing the Caller ID list as the computer file
1 Start Multi-Function Station. 2 [Utilities] i [Device Monitor]
L The [Device Monitor] window will appear.
3 Confirm the status of the unit.

[Status]: Current status of the unit Note: L Additional information (toner and recording paper status, unit information, etc.) will be displayed in [Status] tab by clicking [Advanced Information]. L The status of the unit will be updated by clicking [Refresh]. L If a printing error occurs, the Device Monitor will be started automatically and display the error information. L For details, see the help file by selecting [p] from Multi-Function Station.
1 Start Multi-Function Station. i [Remote Control]
L The [Multi-Function Remote Control] window will appear.
10.2.3 Using the web browser (KX-MB783, LAN connection only)
You can confirm the setting information and status of the unit from the web browser.
1 Start Multi-Function Station. i [Utilities] i
[Embedded Web] L You can also access the unit by entering its IP address on the web browser.
2 Select the category from the menu bar.
[Status]: Toner and paper information, etc. [Device]: Current status of the unit, etc. [Network]: Network information, etc. L When you select [Device] or [Network], you can change which features are displayed by clicking the feature tabs at the top of the right frame.
* The pictured screenshot is for KX-MB783.
2 Select the desired tab (KX-MB773/KX-MB783 only).
L The latest data in the unit will be displayed.
3 Perform the desired operation.
L For details about each function, click [Help]. L To stop the operation, click [Cancel].
Note: L The status of the unit will be updated by clicking [Reload].

4 [OK]

L You can also click [Apply] to continue the next operation without closing the window.
10.3 Cancelling the operations
You can cancel the current operation from the unit. You can also select the desired operation to cancel.
5 Enter the password (feature #155 on page 57). i
[OK] L The new data will be transferred to the unit and the window will close. Note: L Some of the features cannot be programmed from your computer. L For details, see the help file by selecting [p] from Multi-Function Station.

1 {STOP}

L USER STOPPED is displayed.
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 70 Monday, August 6, 2007 11:42 AM
L When USER STOPPED is not displayed, go to step 2.

2 To cancel printing:

Press {STOP} repeatedly to display STOP PRINTING?. To cancel scanning (KX-MB773/KX-MB783 only): Press {STOP} repeatedly to display STOP SCANNING?. To cancel copying: Press {STOP} repeatedly to display STOP COPYING?. To cancel sending or receiving faxes (KXMB773/KX-MB783 only): Press {STOP} repeatedly to display STOP FAX?. To cancel broadcast transmission (KXMB773/KX-MB783 only): Press {STOP} repeatedly to display BROAD CANCELLED?. To cancel fax redialling (KX-MB773/KX-MB783 only): Press {STOP} repeatedly to display SEND CANCELLED?.

Table of Contents2. 1. Table of Contents 1.1 Included accessories.1.2 Accessory information.Finding the Controls 1.3 Description of buttons.1.4 Overview Installation1.5 Toner cartridge and drum unit 1.6 Document tray 1.7 Output tray1.8 Recording paper2. Preparation 2.1 Connections 2.2 Turning the power switch ON Help Button2.3 Help function Volume 2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time. 2.7 Your logo.2.8 Your fax number 3. Copy / Copying 3.1 Using the unit as a copy machine.
Thank you for purchasing a Panasonic fax machine. Things you should keep a record of Attach your sales receipt here. For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer's name and address Dealer's telephone number
10 % image area Approx. 1,000 sheets of A4 size paper can be printed.
Table of Contents1. 1. Table of Contents / Introduction and Installation Accessories 1.1 Included accessories. 1.2 Accessory information.Finding the Controls 1.3 Description of buttons. 1.4 Overview Installation 1.5 Toner cartridge and drum unit 1.6 Document tray 1.7 Output tray 1.8 Recording paper 2. Preparation 2.1 Connections 2.2 Turning the power switch ON Help Button 2.3 Help function Volume 2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time. 2.7 Your logo. 2.8 Your fax number 3. Copy / Copying 3.1 Using the unit as a copy machine. 3.2 Making a copy 3.3 More copying features 4. PC Operations/ Setup 4.1 Connecting to a computer 4.2 Installing Multi-Function Station 4.3 Starting Multi-Function Station Printing 4.4 Using the unit as a printer Scanning 4.5 Using the unit as a scannerRemote Control 4.6 Operating the unit from your computer. 4.7 Fax sending/receiving using Multi-Function Station
15 % image area Approx. 650 sheets of A4 size paper can be printed.
Table of Contents1. 1. Table of Contents / Introduction and Installation Accessories 1.1 Included accessories. 1.2 Accessory information.Finding the Controls 1.3 Description of buttons. 1.4 Overview Installation 1.5 Toner cartridge and drum unit 1.6 Document tray 1.7 Output tray 1.8 Recording paper 2. Preparation 2.1 Connections 2.2 Turning the power switch ON Help Button 2.3 Help function Volume 2.4 Adjusting volume Initial Programming 2.5 Dialing mode 2.6 Date and time.
Note: L The image area changes with the depth, thickness and size of the characters. L If you turn on the toner save feature, the toner cartridge will last approx. 40 % longer.

A Accessories: 10 Address list: 92 Answering machine: 50 Approved users (Feature #532): 65
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 103 Monday, August 6, 2007 11:42 AM
Copier: 24 Directory: 24 Fax receiving: 24 Feature list: 24 Reports: 24 HTTPD (Feature #534): 66 I J IP address (Feature #501): 65 Jams Document: 87 Recording paper: 82 Journal report (Feature #402): 44, 92 Junk fax prohibitor: 51 Recording paper size: 93 Redialling: 43, 45 Reports Address: 92 Broadcast programming: 92 Broadcast sending: 92 Caller ID: 57, 92 Journal: 44, 92 Power down: 80 Printer test: 92 Sending: 43, 59 Setup: 92 Telephone number: 92 Reset fax features (Feature #459): 62 Resolution: 36, 43 Ring count FAX ONLY (Feature #210): 57 Silent fax (Feature #436): 61 TEL/FAX (Feature #212): 59 Ringer pattern (Feature #161): 25, 57 S Scan features: 64 Scan mode (Feature #493): 64 Scanner glass: 23, 36, 43 Scan parameter hold (Feature #494): 64 Sending faxes Broadcast: 46 From memory: 44 Manually: 43 Navigator directory: 45 One-touch dial: 45 Sending report (Feature #401): 43, 59 Set fax default (Feature #459): 62 Setup list: 92 Storing Broadcast: 45 Navigator directory: 41 One-touch dial: 41 Subnet mask (Feature #502): 65 T Telephone number list: 92 TEL mode: 49 Toner cartridge: 13 Toner life: 94 Toner save (Feature #482): 16, 58 V Volume: 25 Z Zoom hold (Feature #468): 63
L Label: 32 LAN features: 65 Language (Feature #110): 56 Location (Feature #114): 56 Logo (Feature #102): 26 M MAC address (Feature #508): 65 Machine name (Feature #507): 65 Manual answer mode (Feature #404): 59 Manual input tray: 32 Memory reception alert (Feature #437): 61 Mode timer (Feature #464): 58 Multi-Function Station software Activating: 30 Installing: 28 Uninstalling: 29 N Navigator directory Sending faxes: 45 Storing: 41 Network features: 67 O OCR software: 34 One-touch dial Sending faxes: 45 Storing: 41 Overseas mode (Feature #411): 59 P Page layout hold (Feature #467): 63 Paper size Paper input tray (Feature #380): 57 Password (Feature #155): 57 PC fax reception (Feature #443): 27 PC fax setting (Feature #442): 61 PC print features: 63 Polling: 51 Power failure: 80 Power save (Feature #403): 57 Printer test list: 92 Programming: 55 Pull scan: 35 Push scan: 33 Q Quick scan: 44 R Recall time (Feature #121): 56 Receiving faxes Automatically: 48 Manually: 49 Recording paper: 18

doc1

Universal Line rack szekrny 600 x 1000 rendelsi kd 396-1974 396-1975 396-1964 396-1976 termk kd CKR26U6100 CKR36U6100 CKR42U6100 CKR47U6100 mret (sz x m x ma) 600 x 1000 x 1309 mm 600 x 1000 x 1754 mm 600 x 1000 x 2021 mm 600 x 1000 x 2244 mm lers 26U Rack Cabinet 36U Rack Cabinet 42U Rack Cabinet 47U Rack Cabinet
Universal Line rack szekrny 600 x 400 rendelsi kd 396-1972 396-1969 termk kd CKR44U64 CKR47U64 mret (sz x m x ma) 600 x 400 x 2110 mm 600 x 400 x 2244 mm lers 44U Rack Cabinet 47U Rack Cabinet
Universal Line PC case 600 x 800 rendelsi kd 396-1905 396-1904 termk kd PCCASE36 PCCASE36M mret (sz x m x ma) 600 x 800 x 1744 mm 600 x 800 x 1744 mm lers 36U PC Case Cabinet 36UM PC Case Cabinet
Kbelezsi rendszerek, rack szekrnyek
Universal Line Jumbo rack szekrny 800 x 800 rendelsi kd 396-1750 396-1753 396-1763 396-1757 396-1759 396-1748 termk kd CKR32U88 CKR36U88 CKR39U88 CKR42U88 CKR44U88 CKR47U88 mret (sz x m x ma) 800 x 800 x 1576 mm 800 x 800 x 1754 mm 800 x 800 x 1887 mm 800 x 800 x 2021 mm 800 x 800 x 2110 mm 800 x 800 x 2244 mm lers 32U Rack Cabinet 36U Rack Cabinet 39U Rack Cabinet 42U Rack Cabinet 44U Rack Cabinet 47U Rack Cabinet
Universal Line Jumbo rack szekrny 800 x 1000 rendelsi kd 396-1924 396-1949 term kd CKR42U8100 CKR47U8100 mret (sz x m x ma) 800 x 1000 x 2021 mm 800 x 1000 x 2244 mm lers 42U Jumbo Cabinet 47U Jumbo Cabinet
ServerMAX rack szekrny 600 x 1000 rendelsi kd 396-1919 396-1923 396-1921 396-1918 termk kd SRV26U SRV36U SRV42U SRV47U mret (sz x m x ma) 600 x 1000 x 1338 mm 600 x 1000 x 1782 mm 600 x 1000 x 2049 mm 600 x 1000 x 2272 mm lers 26U Server Cabinet 36U Server Cabinet 42U Server Cabinet 47U Server Cabinet
ServerMAX rack szekrny 800 x 1000 rendelsi kd 396-1922 396-1903 termk kd SRV42U8 SRV47U8 mret (sz x m x ma) 800 x 1000 x x 1000 x 2272 lers 42U Server Cabinet 47U Server Cabinet
PROline fali szekrny 600 x 450 rendelsi kd 396-1910 396-1912 396-1914 396-1915 396-1917 termk kd PRL07U45 PRL09U45 PRL12U45 PRL16U45 PRL20U45 mret (sz x m x ma) 600 x 450 x 402 mm 600 x 450 x 491 mm 600 x 450 x 624 mm 600 x 450 x 802 mm 600 x 450 x 980 mm 7U Wall mounting cabinet 9U Wall mounting cabinet 12U Wall mounting cabinet 16U Wall mounting cabinet 20U Wall mounting cabinet
PROline fali szekrny 600 x 560 rendelsi kd 396-1911 396-1913 396-1915 396-1959 396-8400 termk kd PRL07U56 PRL09U56 PRL12U56 PRL16U56 PRL20U56 mret 600 x 560 x 402 mm 600 x 560 x 491 mm 600 x 560 x 624 mm 600 x 560 x 802 mm 600 x 560 x 980 mm lers 7U Wall mounting cabinet 9U Wall mounting cabinet 12U Wall mounting cabinet 16U Wall mounting cabinet 20U Wall mounting cabinet

396-1845 396-1846

M44HRK60 M44HRK80
465x345x30 mm 465x525x30 mm
4 ponton rgzthet a sn a 19 szerel oszlopokhoz ESTAP 19 szereloszlop prolhoz illeszkedik Perforlt Teherbrs: 25kg. Anyaga: acl lemez Szn: Ral7035 szrke vagy Ral9005 fekete
Kbelezsi rendszerek, rack szekrnyek, kiegsztk
Kihzhat polc - nagy teherbrs rack polc (19 ell - 19 htul) UNIVERSALline ECOline Server Lers 19 Sliding shelf, vented, heavy duty type, complete with rear cable management system SOHO Slimline SOHO Slimline SOHO Slimline SOHO Slimline SOHOline 19 SOHOline 19 SOHOline 19 SOHOline 19 SOHOline 10 SOHOline 10 SOHOline 10 SOHOline 10 SYSTEMrack SYSTEMrack SYSTEMrack SYSTEMrack ServerMAX RELAYrack EUROline Diamond PROLINE PROLINE PROLINE PROLINE ECOline

396-1870

M55 HR720
4 ponton rgzthet a sn a 19 szerel oszlopokhoz ESTAP 19 szereloszlop prolhoz illeszkedik Perforlt Teherbrs: 65 kg. Anyaga: acl lemez Szn: Ral7035 szrke vagy Ral9005 fekete
L snek UNIVERSALline ECOline Server ServerMAX Lers L type support slide rail, enclosure depth=600mm depth=600 mm depth=800 mm depth=1000 mm RELAYrack RELAYrack RELAYrack EUROline EUROline EUROline Diamond Diamond Diamond ECOline ECOline ECOline
396-1862 396-1863 396-1864
M44RLD60 M44RLD80 M44RLD100
330x60x44 mm 490x60x44 mm 730x65x44 mm
L prol snek a nehz 19 eszkzk szerelshez lettek kifejlesztve, melyeket a 19 szereloszlopok oldalra lehet szerelni Knny szerels 3 klnbz mlysg szekrnyhez Teherbrs: 100 kg. Anyaga: acl lemez Bevonat: Galvanizlt
Billentyzettart fik 1U 19 - zrhat UNIVERSALline ECOline Server ECOline Server ServerMAX ServerMAX
Lers 1U 19 Keyboard drawer

396-1775

E44DRW 1U

483x400x44 mm

1U, zrhat k billenytzethez, 410mm szlessgig 19 rackbe szerelhet Mlysgben llthat Teherbrs: 25kg. Anyaga: acl lemez Szn: Ral7035 szrke vagy Ral9005 fekete
Lgkifv / ht egysgek - ON/OFF kapcsolval elltott UNIVERSALline
rendelsi kd 396-1824 396-1825 396-1826 396-1827 396-1850 396-1851 396-1852 396-1875 396-1876 396-1877 396-1878 396-1780 396-1781
M11 1F1F M11 HV1F W M11 HV2F W M11 HV4F W M44 HV1F M44 HV2F M44 HV4F M55 HV4F S M55 HV6F S M44 DIA2F M44 DIA4F E44 HV2F E44 HV4F

Fan 220vac, with 2m. Cable Cooling unit with 1 fan + on/o switch controlled, suitable for wall mounting, ecoline and euroline cabinets Cooling unit with 2 fan + on/o switch controlled, suitable for wall mounting, ecoline and euroline cabinets Cooling unit with 4 fan + on/o switch controlled, suitable for wall mounting, ecoline and euroline cabinets Cooling unit with 1 fan + on/o switch controlled, suitable for Universalline cabinets Cooling unit with 2 fan + on/o switch controlled, suitable for Universalline cabinets Cooling unit with 4 fan + on/o switch controlled, suitable for Universalline cabinets Cooling unit with 4 fan + on/o switch controlled, suitable for ServerMAX cabinets Cooling unit with 6 fan + on/o switch controlled, suitable for ServerMAX cabinets Cooling unit with 2 fan + on/o switch controlled, suitable for Diamond cabinets Cooling unit with 4 fan + on/o switch controlled, suitable for Diamond cabinets 19 1U rack mount cooling unit with 2 fans + on/o switch controlled 19 1U rack mount cooling unit with 4 fans + on/o switch controlled
mret 120x120x37 mm 350x190x44 mm 350x190x44 mm 340x410x44 mm 440x400x65 mm 440x400x65 mm 440x400x65 mm 380x520x45 mm 380x520x45 mm 417x450x45 mm 417x450x45 mm 483x150x44 mm 483x300x44 mm
ON/OFF kapcsol Komplett bels vezetkezssel Knny hozzfrs, karbantarts Zajszint: 47 db (alacsonabb zajszint opcionlis) 1 ventiltor kapacitsa 2,3 m3/perc, lgszllts CFM:80 Szn: Ral7035 szrke vagy Ral9005 fekete
Lgkifv / ht egysgek - Thermosztttal vezrelt UNIVERSALline ECOline Server SOHO Slimline SOHOline 19 SOHOline 10 SYSTEMrack ServerMAX RELAYrack EUROline Diamond PROLINE ECOline
Cooling unit with 1 fan + thermostat
396-2060 396-2061 396-2062 396-2063 396-2064 396-1967 396-2065 396-2066 396-2067 396-2068 396-2069 396-2070 396-2071 396-1952
M11 HV1F W T controlled, suitable for wall mounting, ecoline M11 HV2F W T M11 HV4F W T M44 HV1F T M44 HV2F T M44 HV4F T M44 HV2F T 48 M44 HV4F T 48 M55 HV4F S T M55HV6F S T M44 DIA2F T M44 DIA4F T E44 HV2F T E44 HV4F T
and euroline cabinets Cooling unit with 2 fan + thermostat controlled, suitable for wall mounting, ecoline and euroline cabinets Cooling unit with 4 fan + thermostat controlled, suitable for wall mounting, ecoline and euroline cabinets Cooling unit with 1 fan + thermostat controlled, suitable for Universalline cabinets Cooling unit with 2 fan + thermostat controlled, suitable for Universalline cabinets Cooling unit with 4 fan + thermostat controlled, suitable for Universalline cabinets Cooling unit with 2 fan+thermostat controlled, suitable for Universalline cabinets, 48VDC Cooling unit with 4 fan+thermostat controlled, suitable for Universalline cabinets, 48VDC Cooling unit with 4 fan + thermostat controlled, suitable for ServerMAX cabinets Cooling unit with 6 fan + thermostat controlled, suitable for ServerMAX cabinets Cooling unit with 2 fan + thermostat controlled, suitable for Diamond cabinets Cooling unit with 4 fan + thermostat controlled, suitable for Diamond cabinets 19 1U rack mount cooling unit with 2 fans + thermostat controlled 19 1U rack mount cooling unit with 4 fans + thermostat controlled

Grounding kit 6ea.earthing leads + copper busbar

396-1860

M44 PEB01
6 db zld-srga vezetk, csatlakozval szerelve; Potencil kiegyenlt fldel sn (a folytonos fldel rendszerbe kthet).
Vilgt berendezsek UNIVERSALline ECOline Server ServerMAX RELAYrack RELAYrack RELAYrack EUROline EUROline EUROline Diamond Diamond Diamond
Lighting xture 1U 19, with on/o switch - manually by hand Lighting xture 1U 19, with door switch - when the door opened, activated automatically

396-1890 396-1891

MAYDNL01 MAYDNL02
483x35x44 mm 483x35x44 mm
*19 1U *On/off kapcsolval vagy automatikus ajt nyitsrzkelvel *220V AC CE megfelelsgi tanstvnnyal
Vak panelek UNIVERSALline ECOline Server ECOline Server ServerMAX ServerMAX
396-1770 396-1771 396-1772 396-1773 396-1774 396-1769
E44 BPN01 E44 BPN02 E44 BPN03 E44 BPN04 E44 BPN05 E44 BPN06
1U 19 Blank panel 2U 19 Blank panel 3U 19 Blank panel 4U 19 Blank panel 5U 19 Blank panel 6U 19 Blank panel
483x12x44 mm 483x12x88 mm 483x12x133 mm 483x12x177 mm 483x12x222 mm 483x12x266 mm
Vak panelek a szekrny res helyeinek eltakarsra Anyaga: acl lemez *19 Szn: Ral7035 szrke vagy Ral9005 fekete

Lbazat UNIVERSALline

Plinth width=600 mm depth=600 mm Universalline Plinth width=600 mm depth=800 mm Universalline Plinth width=800 mm depth=800 mm Universalline Plinth width=600 mm depth=1000 mm ServerMAX - tilt barl Plinth width=800 mm depth=1000 mm ServerMAX - tilt barl Plinth width=600 mm depth=600 mm ECOline Plinth width=600 mm depth=800 mm ECOline
396-2080 396-2081 396-2082 396-2083 396-2084 396-2085 396-2086
M11 PNT66 M11 PNT68 M11 PNT88 M11 PNT610 SRV M11 PNT810 SRV M11 PNT66 ECO M11 PNT68 ECO
600x600x100 mm 600x780x100 mm 780x780x100 mm 600x600x100 mm 600x780x100 mm 600x600x100 mm 600x780x100 mm
A lbazat a szekrny 100 mm-rel val megemelsre szolgl. A belsejben knyelmesen lehet a kbel felesleg tekercseket elhelyezni. 4 oldala levehet, hts oldala fss kbelvezetsi lehetsg. Anyaga: acl lemez Magassg = 100 mm. Szn: Ral7035 szrke vagy Ral9005 fekete Knnyen rgzthet a szekrnyhez
Delta Networks telefonos rendezdoboz rendelsi kd 396-2578 396-259 396-2577 tpus HX R-30 (30 rpras rendezdoboz) HX R- 50 (50 rpras rendezdoboz) HX R-100 (100 rpras rendezdoboz)

 

Tags

RX-V1700 Alessi WTC0951K PV-L680D Devireg 550 HT-X1H To Life Radio WM-GX400 BD149R 600 K EM-2000 521PRO 50 2T HR7739-55 DP391B V2 2 MF4270 Clipso Portable VGN-NR21z S KDC-3027G LE40A552 ICF-C414 Favorit 460 FTM-350R ESQ-1 PLV-Z1X SRU1020 10 MD-301mkii Volvo XC60 HR352SC-s02 Rules DFL-700 Urc-5705 Ii 60 HVR-M25AN Citroen DS3 Yamaha Vmax 5 1 CLP-621 6143 S SKW-550 430EX II SRU3040-10 Radio700 Etrex R4250 Trick Book KH 5510 MX5800SA-22S 32PW8707-12 LE32M71B TC 250 C-7070 Asus W5FM NAD T535 PJ-LC7 ICF-C211L Airport Card Stylus 600 RKK 500 DP2700 SD-AT1000H S100 FS 50PB4RT PDP-50MXE10 KRC-858R 2153 Cmda RH7521W GZ-MG20EK Review Protege M400 Gr101 LD-2040SH DZO-V38 VSX-816-K Photo 1270 MIX-R1U F2400 Behringer 1C ACS 9 PSR 960 GX-635D Daytona USA Cube Q120 PD-F100 R-230KW P-155 ZWG-3101 EFP6411X 1390 MF GR-700 PV-GS39 IC-F3S 943NW Data 100 GSA-E60N 50PC56 24PW6518 EP755

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101