Panasonic Telephone Systems
Proprietary Telephone for Electronic Modular Switching System

Panasonic KX-T7050

www.voicesonic.com Phone: 877-289-2829
Panasonic KX-T7050, KXT7050, KX T7050, kx-t7050, kxt7050, Reference Manual, KX-T7050 Reference

www.voicesonic.com

Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided. 7 Do not allow anything to rest on the telephone cord. Do not locate this product where the cord will be abused by persons walking on it. 6 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 9 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
11. Unplug this product from the wall outlet and refer servicing to qualified setvice personnel under the following conditions: A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls, that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician lo restore the product to normal operation.
E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance. 12 Avoid using a telephone (other than a cordless type) during an electrical storm There may be a remote risk of electric shock from lightning. 13 Do not use the telephone to report a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

10 To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified serviceman when Slots and openings in the some service or repair work is cabinet and the back or required. Opening or bottom are provided for removing covers may expose ventilation, to protect it from you to dangerous voltages or overheating, these openings other risks. Incorrect must not be blocked or reassembly can cause covered. The openings electric shock when the should never be blocked by appliance is subsequently placing the product on the used. bed. sofa, rug, or other Similar_ , _
Thank you for purchasing the Panasonic Telephone.

Connection

Connect as shown.

Table of Contents

Important safety instructions C o n n e c t i o n Initial setting W a l l m o u n t i n g

To the EMSS control

Location of controls Accessory order information Important information Included accessories

Handset one

Telephone line cord

Handset cord

Initial setting

Wall mounting

This unit can be mounted on the wall phone plate
Place the stand on the center of the unit.
HANDSET VOLUME Selector: To adjust the volume level of the handset. NORMAL: Normal voice HIGH: Loud voice RINGER VOLUME Selector: To adjust the volume level of the ringer. HIGH: Loud ringer LOW: Low ringer OFF: No ringer VOLUME Control: To adjust the volume level of the speaker volume MAX: Loud voice MIN: Low voice
Remove the attached stand.
Mount the unit on the wall phone plate.
Rotate the stand l/2 turn so that the arrow on the stand shows UP for WALL
To temporarily place the handset down during a conversation, hook as shown.
MEMORY Switch: Set to SET. For station programming, set to PROGRAM

Location of controls

0 INTERCOM Button and Indicator: Used for making or receiving an intercom call. @ REDIAL Button: Radials the last number dialed. @FLASH Button: Used for sending the hook flash signal to the CO line. 8 Programmable Feature Buttons: Dials or accesses the system feature with one touch. @Flexible CO Line Buttons and Indicators: Used for dialing via CO line. Direct Station Selection, or Programmable Feature buttons. @Flexible Message Waiting Button and Indicator: Used for Message Waiting, Direct Station Selection, or Programmable Feature button, 0 TRANSFER Button: Transfers a call to any extension.
@PAUSE Button: Inserts a pause between the access number and the phone number. @AUTO DIAUSTORE Button and Indicator: Used for dialing the system speed dialing/For storing functions into memory. @CONFERENCE Button: Used for speaking with three parties at the same time. Q MONITOR Button and Indicator: Used for making a call without using the handset. ,e HOLD Button: Places a call on hold.
These functions are limited to the specified EMSS Control Units. Refer to the Installation manual.
KX-T7050 is compatible with the Panasonic Ele,ctronic Modular Switching Systems and can perform most functions within each system. _ 7-
Accessory order information
*Replacement parts and accessories are available through your local authorized parts distributor.

Important information

WARNING: NOTE:
TO PREVENT FiRE OR S&K HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE

(cont.)

Part No. ~ 1 KX-JOIW,B KX-J15W,B 1 ! KX-J25W.B ~

Picture

Description
Comment 7 feet 15feet 25 feet
*Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps and motors. *The unit should be kept free of dust, moisture and vibration, and should not be exposed to direct sunlight. *Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth. *Do not use any handset other than Panasonic handset.

and connect a known working phone. If the known working phone operates properly, have it repaired by one of the specified Panasonic Factory Service
If there is any trouble, disconnect the unit from the extension line
To assure continued compliance with FCC rules, do not make any unauthorized modiiicatrons. When programming emergency numbers and/or making test calls to emergency numbers: 1) Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. 2 Perform such activities in the off-peak hours, such as early morning hours or late evenings.

CAUTION:

Centers. If the known working phone does not operate properly, check the Electronic Modular Switching System and the internal extensron wiring.
This telephone provides magnetic coupling to he&&g a i d s INSTALLATION:
1) Never install telephone
See More Panasonic Manuals

Phone: 877-289-2829

wiring during a lightnrng storm. 2) Never install telephone jacks in wet locations unless the jack IS specifically desrgned for wet locattons. 3) Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network Interface. 4) Use caution when installing or modifying telephone knes.
Thts equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectton against harmful Interference In a residentral installation. This equipment generates. uses. and can radiate radio frequency energy and, if not installed and used in accordance with the InstructIons, may cause harmful interference to radio communicatrons. However, there is no guarantee that interference will not occur In a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the recervrng antenna. -Increase the separatron between equrpment and receiver, -Connect the equipment into an outlet on a crrcutt different from that to which the receiver is connected. -Consult the dealer or an experienced radioflV technician for help.