Reviews & Opinions
Independent and trusted. Read before buy Panasonic KX-T7431!

Panasonic KX-T7431

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic KX-T7431, size: 770 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic KX-T7431Panasonic KX-T7431 Phone KX-T7431b, KX-T7431w
KX-TD500 Phone Systems Can be reused on Panasonic KX-TDA50G - KX-TDA100 - KX-TDA200 - KX-TDA600 - KX-TDE100 - KX-TDE200 - KX-NCP500 and KX-NCP1000 Telephone Systems on a Digital Extension Port - Requires Larger or Extra Power Supply depending upon system 1-Line 16 Character LCD Readout 12 Programmable Line Buttons Jog Dial Control provides easy access to both system and personal speed dial lists - controls speaker and handset volume/contrast XDP -eXtra Device Port-- Jack- Allows you to connect a... Read more

Details
Brand: Panasonic
Part Numbers: "KX-T7431b, KX-T7431w", "kx-t7431b, kx-t7431w"

 

[ Report abuse or wrong photo | Share your Panasonic KX-T7431 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 9. Page 1 of 1. Average Rating:
yvette3324 11:03am on Saturday, October 23rd, 2010 
Great quality ; low price ; comfortable ; Clear sound ; Loud for the person on the other end :D Maybe too loud.. :P
xoai001 3:42am on Tuesday, October 5th, 2010 
Unfortunately, I have 4 slipped disks in my neck for which the pain radiates down my arm and into my hand. Great for high noise area's Clear Reception","Durable","Easy Controls
FlatAlex 8:22pm on Monday, September 20th, 2010 
Excellent headset Great sound quality with my Panasonic cordless phone. I had one before but broke it putting it on over my baseball cap.
DGehman 7:04pm on Monday, September 13th, 2010 
Love this headset! It is super comfortable and makes it so easy to be on the phone while getting other things done... Just bought 2 more of these. The first broke after 4 years but I like them so much I keep buying. Very clear on both ends. Keeps one ear free.
Chucky 8:58pm on Sunday, August 29th, 2010 
I purchased 6 of these for my technicians to use. Hands free operation in a noisy environment while they walk, climb ladders and use hand tools.
vmpatel1271 8:03am on Sunday, June 20th, 2010 
I would not buy a Panasonic KX-TCA60 Headset again. I expect phone headsets to last longer than five months before failing like this one did.
alex. 5:28am on Sunday, May 2nd, 2010 
I have had very good luck with most Panasonic products (vs SONY, which for me. Great quality and price. Works with all my wireless and wired phones that have a 2.5 mm jack Shipping cost
McKiltie 5:43pm on Sunday, April 25th, 2010 
This is not a PC headset, it works great with my AT&T 2-line desk phone. Slips on easily, ear piece is comfortable.
spielermacher 10:30am on Sunday, March 21st, 2010 
Don't take the risk of brain tumors - use a corded headset. 4 ft cord","Clear Reception","Durable","Excellent sound quality". Works like a charm. Clear Reception None

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Wall Mounting

1. Disconnect the handset cord rst. Remove the handset hook by pulling it up. Turn it around and re-insert it. 4. Insert the stand in the centre slots.
2. Remove the attached stand.
5. Insert the included tel line cord. (Ensure the cord is inserted in the groove to prevent damage to the connector.)
3. Turn it around 180 degrees.
6. Mount the unit on the wall.
To place the handset down temporarily during a conversation, hook it over the top edge of the phone as shown.
Feature Button Descriptions
s KX-T7431/KX-T7433/KX-T7436/KX-T7420/KX-T7425
AUTO ANSWER/MUTE button Used for intercom auto answer; or it turns the microphone off during a conversation. AUTO DIAL/STORE button Used for speed dialling or storing program changes. CONFERENCE button Used to establish a three-party conference. FLASH/RCL button This button can be used to send a Recall signal to the local exchange or disconnect the current call and start another call. Flexible Outside (CO) Line buttons Used to make or receive an outside call, or access a feature if the button is assigned (e.g. One touch dialling button). Function buttons (F1 through F10) (KX-T7436 only) Used to perform the corresponding displayed function or operation. FWD/DND (Call Forwarding/Do Not Disturb) button Used to perform a Call Forwarding feature or set the Do Not Disturb (DND) feature. HOLD button Used to place a call on hold. INTERCOM button Used to make or receive extension calls. Jog Dial Used to adjust the volume of the handset receiver, headset, ringer and speaker, or to adjust the display contrast. Refer to Initial Setting in this manual. It is also used to select data from the Call Directory and the System Feature Access Menu for KX-T7431, KX-T7433, KX-T7436. MESSAGE button Used to leave a notication to a busy extension or call back the message notication sender. MODE button (KX-T7431 only) Used to change the display in order to access various features. PAUSE button Used to insert a pause in speed dial numbers or in other one-touch dial numbers. PROGRAM button Used to enter and exit the programming mode. REDIAL button Used for the redialling the last number or redialling automatically. SELECT button (KX-T7431 only) Used to select a displayed feature or to call a displayed phone number. SHIFT button Used to alternate the selection of Soft Button functions. Soft buttons (S1 through S3) Used to perform the function or operation that appears on the bottom line of the display. SP-PHONE (Speakerphone) button Used for a handsfree speakerphone operation. TRANSFER button Used to transfer a call to another extension or external destination. VOICE CALL/MUTE button (KX-T7420 only) Used for intercom auto answer, but it cannot be used for handsfree conversations. It also turns the microphone off during a conversation.

Initial Setting

The Jog Dial can be used for the display contrast and the volume control. Rotate the Jog Dial in either direction as desired. The contrast or the volume level will change as follows. Left (counter-clockwise) Right (clockwise)

Level decreases

Level increases
Display Contrast Adjustment
The MODE button and the Jog Dial for KX-T7431 users, and a Soft button and the Jog Dial for KX-T7433 and KX-T7436 users are used to adjust the display contrast. The contrast level is indicated on the display by the number.

KX-T7431

While on-hook 1. Press the MODE button six times. The display shows: <Example> Contrast: 3 ( contrast volume level 3) 2. Rotate the Jog Dial in the desired direction.

KX-T7433 and KX-T7436

S1 S2 S3
While on-hook or during a conversation 1. Press the CONT (S1) button.
2. Rotate the Jog Dial in the desired direction. The display shows: <Example> Contrast: 3 ( contrast volume level 3)

When using a headset

The Panasonic Digital Super Hybrid System supports the use of a headset with a proprietary telephone (PT). When you use a headset (optional), you should switch the selection mode rst. Selection is explained in the Handset/Headset Selection in Initial Settings (Section 2 in the KX-TD208 Operating Instructions).
To change to the headset mode
Press: [PROGRAM] [9] [9] [8] [2] [STORE] [PROGRAM].
Changing the ringing tone of a CO button
There are eight ringer frequencies available for each CO (Loop-CO, Single-CO) button. If you wish to change them, refer to the Distinguishing the ringing tone for each CO button in the Initial Settings (Section 2 in the KX-TD208 Operating Instructions).
Volume Control Handset Receiver/Headset/Ringer/Speaker
Allows you to adjust the following volumes as required. Handset Receiver volume (levels 1 through 4) Headset volume (levels 1 through 4) Ringer volume (levels 0 through 3) Speaker volume (levels 1 through 12)
To adjust the handset receiver volume
1 1. Lift the handset. 2. Rotate the Jog Dial in the desired direction. The display shows: <Example> Handset: 3 ( volume level 3) You may also adjust the handset receiver volume during a conversation using the handset receiver.
To adjust the headset volume

SP-PHONE

Be sure the headset is connected. 1. Press the SP-PHONE button. 2. Rotate the Jog Dial in the desired direction. The display shows: <Example> Headset: 3 ( volume level 3)

To adjust the ringer volume KX-T7433 and KX-T7436
While the telephone is ringing 1. Rotate the Jog Dial in the desired direction. The display shows: <Example> Ringer: 3 ( volume level 3)
While the telephone is idle and on-hook 1. Press the RING (S2) button. The telephone will ring.
2. Rotate the Jog Dial in the desired direction. The telephone will stop ringing in about 4 seconds. When the volume level is 0, the display shows RING OFF.
While the telephone is idle and on-hook 1. Press the MODE button ve times. The display shows: <Example> Ringer: 3 ( volume level 3) 2. Rotate the Jog Dial in the desired direction. The telephone will stop ringing in about 4 seconds.

KX-T7420 and KX-T7425

OFF HIGH LOW
1. Adjust the RINGER Volume Selector lever to the desired setting (OFF/LOW/HIGH).
To adjust the speaker volume
1. Press the SP-PHONE button.
2. Rotate the Jog Dial in the desired direction. The display shows: <Example> SP:12 ( volume level 12) You may also adjust the speaker volume while listening to the background music (BGM On mode), receiving a voice call, or receiving a page.

Conditions

If the ringer volume of the KX-T7431 is set to OFF, the display while on-hook is as follows. Ring off 12:00

Station Programming

Station Speed Dialling Number/Name Assignment
Allows you to assign numbers and names that are used frequently to Function buttons on your telephone. You can store extension numbers, telephone numbers and features access numbers.

For KX-T7436 users

To store a number
Be sure that you are in the Station Programming mode: Press [PROGRAM][9][9]. 1
F1 F2 F3 F4 F5 F6 F7 F8 F9

PT-PGM Mode

1. Press a Function button (F1 through F10). The STORE indicator light turns off. The display shows the current status. <Example> ( The outside call, 431-2111, 9-431-2111 is now programmed.) CLR NEXT 2. Enter the desired number (up to sixteen digits). Up to sixteen digits, consisting of 0 through 9 and , can be stored. Enter for a pause. To store the telephone number of an outside party, the ISDN port access code (9, 81 or 82) must be stored as the leading digit. To erase the entry, press the CLR (S2) button. 3. Press the STORE button. The STORE indicator lights. The display shows the initial programming mode.

Pressing the SHIFT button alternates between capital and lower case letters. Once this button is pressed, the SHIFT mode remains until SHIFT is pressed again. To erase the last letter (to backspace), press the CONF (Conference) button. (The CONF (Conference) button becomes the (backspace) key when using the overlay). To erase all the data, press the CLR (S2) button. If you keep rotating the Jog Dial, all of the characters will be displayed in order. <Example> If you rotate the Jog Dial after pressing 2, all the characters will appear in the following order: A a B b. Z z 0 (space) ! ?. , : ; * / + = < > # $ # $ % & @ ( ) A a.
The default is Not Stored. Up to ten dialling numbers and names can be assigned. Each dialling number has a maximum of sixteen digits and each name has a maximum of ten characters.

Features

Handset Microphone Mute
Allows the KX-T7400 series telephone user to turn off the handset microphone so you can consult privately with others in the room. You will still be able to hear the other party.

Setting

AUTO ANSWER MUTE
During a conversation using the handset 1. Press the AUTO ANSWER/MUTE or VOICE CALL/MUTE button. The AUTO ANSWER/MUTE or VOICE CALL/MUTE indicator light ashes red slowly.

Cancelling

When handset microphone mute is established 1. Press the AUTO ANSWER/MUTE or VOICE CALL/MUTE button. The AUTO ANSWER/MUTE or VOICE CALL/MUTE indicator light turns off.
This feature is only available during a conversation with the handset. You can also turn off the microphone of your telephone during a handsfree conversation (Microphone Mute).

Special Display Features

A Panasonic digital proprietary telephone with a large display, KX-T7431, KX-T7433 and KX-T7436, allows you to make a call or operate a feature using the display message. For operation of the features marked *, refer to the corresponding feature in the KX-TD208 Operating Instructions.

Call Directory

Extension (Extension Dialling) STA Speed (Station Speed Dialling) SYS Speed (System Speed Dialling) Call Log (Call Log, Outgoing (KX-T7436 only))

System Feature Access Menu
The System Feature Access Menu provides a display of the system features which appear in alphabetical order. The available features are as follows: Absent Message Capability Automatic Callback Busy Call Log Call Park Call Pickup Call Waiting Door Opener Doorphone Call Electronic Station Lockout Executive Busy Override Log-in / Log-out Message Waiting Night Service On / Off Paging Group, Deny Paralleled Telephone Connection Station Feature Clear Timed Reminder
Call Forwarding/Do Not Disturb (KX-T7436 only)*
You can also access the Call Forwarding and Do Not Disturb features. Go off-hook and press the FWD/DND button.
Call Log, Incoming (KX-T7433/KX-T7436 only)*
List for Display Operation with a Soft button
For KX-T7431, KX-T7433 and KX-T7436 2.3 Making Calls
Quick Dialling Dialling with a System Speed Dialling Button (System Speed Dialling) Dialling with a Station Speed Dialling Button (Station Speed Dialling)

2.6 Others

Before Leaving Your Desk Showing Your Message on the Calling Partys Display (Absent Message Capability) Leaving a Message Notication (Message Waiting) Switching the Day/Night Calling Mode (Night Service) Setting the Paralleled SLT to Ring (Paralleled Telephone Connection)
For KX-T7433 and KX-T7436 2.3 Making Calls
When the Dialled Line is Busy Sending a Call Waiting Tone to a Busy Extension (Busy Station Signalling) Making Your Telephone Ring Back Automatically When a Line Becomes Free (Automatic Callback Busy Camp On)

2.4 Receiving Calls

Picking up a Call Picking up a Call Ringing at Another Extension (Call Pickup) Group Call Pickup
2.5 During a Conversation
Placing a Call on Hold Placing a Call in a System Parking Area (Call Park) Paging group paging
Turning On the Background Music (Background Music (BGM)) Calling with Account Codes (Account Code Entry) Calling an Extension which Denies Receiving Calls (Do Not Disturb Override) Caller Identication Services (for KX-T7230/KX-T7235) Recording the Callers Information Automatically (Incoming Call Log)

For KX-T7436 2.6 Others

Before Leaving Your Desk Forwarding a Call (Call Forwarding) Setting/Cancelling

Jog Dial Operation

You can search for desired items by using the Jog Dial on the corresponding display menu. Rotate the Jog Dial in either direction as desired. The items will be displayed as follows. Left (counter-clockwise) Right (clockwise)

To use the Call Directory, you may shift the display to the Jog Dial Operation display by pressing the SHIFT or MODE button rst.

s KX-T7431

System Speed Dialling

Station Speed Dialling

Extension Dialling

John Smith

Extension Dialling / System Speed Dialling / Station Speed Dialling
1. Rotate the Jog Dial until the desired item is displayed. 2. Press the SELECT button or go off-hook.
Press the MODE button to return to the initial display. For System Speed Dialling and Extension Dialling, before rotating the Jog Dial, you can press the corresponding key to search for the desired letter. <Example> Press 2 two times to display B items.

s KX-T7433

1 Jan STA 15:00 EXT FEAT

Extension Speed Dialling

A n n P a r k e r

B o b J o n e s

Alice MENU

Carol MENU

Extension Dialling / Station Speed Dialling
1. Press the STA (S1) or EXT (S2) button. 2. Rotate the Jog Dial until the desired item is at the arrow. 3. Press the CALL (S3) button or go off-hook.
For System Speed Dialling and Extension Dialling, before rotating the Jog Dial, you can press the corresponding key to search for the desired letter. <Example> Press 2 two times to display B items.
1. Rotate the Jog Dial until the desired item is at the arrow. 2. Press the CALL (S3) button or go off-hook.
s KX-T7436 Using the Function button
Ronald Zaydel Adam Alice Ann Parker MENU

Call Log, Outgoing

<Example> To select 111;

100200300400500 CLR MENU

Ann Parker Beth Bob Jones Carol Chris MENU
1. Press the Extension (F3), STA Speed (F8) or SYS Speed (F9) button. 2. Rotate the Jog Dial until the desired item is at the arrow. 3. Press the CALL (S3) button.
You can press the Function button (F1 through F5) on the same line of the desired item, lift the handset or press the SP-PHONE button instead of the CALL (S3) button. For System Speed Dialling and Extension Dialling, before rotating the Jog Dial, you can press the corresponding key to search for the desired letter. <Example> Press 2 two times to display B items.
1. Press the Call Log (F5) button. 2. Press the desired Function button.
Using the Soft button or rotating Jog Dial directly
Extension STA Speed Features SYS Speed Call Log EXT FEAT STA

Ronald Zaydel Adam Alice Ann Parker MENU MENU

CALL NEXT

Ronald Zaydel Adam Alice Ann Parker MENU MENU
Ann Parker Beth Bob Jones Carol Chris MENU MENU
1. Press the STA (S1) or EXT (S2) button. 2. Rotate the Jog Dial until the desired item is at the arrow. 3. Press the CALL (S3) button.
1. Rotate the Jog Dial until the desired item is at the arrow. 2. Press the CALL (S3) button.
2) System Feature Access Menu
You can access the features which are displayed in alphabetical order. To access the features, you may change the display to the Jog Dial Operation display by pressing the MODE or SHIFT button rst. Then follow the procedures below.

1 Jan 15:00 STA EXT FEAT

s KX-T7436
Extension STA Speed Features SYS Speed Call Log EXT STA FEAT

ABST MSG Off

A B S T M S G O f f ABST MSG On 1-9 SEL MENU

Absent MSG Off

Absent MSG On Busy Ovrd Deny C.Pickup CO C.Pickup Deny MENU MENU (1-9) (1/0)
If a parameter is required, the messege will flash.
Enter a parameter, if required.
B S Y O v r D N Y 1/0 C.Pickup CO SEL MENU
C.Pickup Direct () C.Pickup Group (1/0) C.Waiting Call Park (0-9) Callback Busy Cancel MENU SEL NEXT MENU

KX-T7431

1. Rotate the Jog Dial until the desired item is displayed. 2. Press the SELECT button. 3. Enter the parameter, if required.
When using a KX-T7436, you can press the Function button (F1 through F5) on the same line of the desired item instead of the SEL (S3) button. When using a KX-T7436, you can press the Features (F4) button in any display (initial through third). Before rotating the Jog Dial, you can press the corresponding key to search for the desired letter. <Example> Press 2 two times to display B items.

KX-T7433

1. Press the FEAT (S3) button. 2. Rotate the Jog Dial until the desired item is at the arrow. 3. Press the SEL (S3) button. 4. Enter the parameter, if required.

KX-T7436

1. Press the Features (F4) or FEAT (S3) button. 2. Rotate the Jog Dial until the desired item is at the arrow. 3. Press the SEL (S3) button. 4. Enter the parameter, if required.

System Feature List

You can access the following features which are displayed in alphabetical order. The parameters used in the list are for a telephone connected to a KX-TD208.
DISPLAY (KX-T7436) Absent MSG Off Absent MSG On Busy Ovrd Deny C.Pickup C.Pickup C.Pickup C.Pickup C.Waiting CO Deny Direct Group DISPLAY (KX-T7431/KX-T7433) ABST MSG Off ABST MSG On 1-9 BSY Ovr DNY 1/0 C.Pickup CO C.PickupDNY 1/0 C.PickupDRT ext C.Pickup GRP C.Waiting 1/0 FEATURE DESCRIPTION

Changing the Flexible Buttons
You can change the exible buttons on your telephone to certain function buttons. For example, your telephone has more CO buttons than available Exchange lines, so you may change unused CO buttons to one-touch dialling buttons, etc. Programming buttons are: Flexible CO button Flexible DSS button Programmable Function (PF) button Check the required operation rst, and if your telephone is not provided with a convenient button, you can assign the button here.
To enter the programming mode To Program

To continue

PROGRAM

To Exit

Press CO, DSS or PF. (Check the list.)

Programming Input

Follow the Programming Input in the list.

Press PROGRAM.

Dial 99.

Press STORE.

FUNCTION
PROGRAMMABLE BUTTON CO DSS PF

PROGRAMMING INPUT

ISDN service no.
(09, , #, 16 digits max.)

ISDN Service

ISDN service number depends on the services which you want to perform. For more information about the ISDN services or the specic numbers, please consult with your ISDN network suppliers. The availability of this service depends on your ISDN contract.

Others

Before Leaving Your Desk
Forwarding a Call (Call Forwarding)
By the ISDN Service all calls By the ISDN Service when busy By the ISDN Service no answer

DESCRIPTION

All calls to your MSN number are forwarded by the ISDN. Calls to your MSN are forwarded when you are busy, by the ISDN. If you do not answer calls, your MSN will be forwarded by the ISDN.

SLT and PT

Off-hook.
Dial forward type number (24).

parameter

Dial required parameter. Conrmation tone On-hook.

Dial 7109.

FWD/DND

Off-hook. Press FWD/DND.

Dial 9.

FORWARD TYPE

FORWARD TYPE NO.

PARAMETER

ISDN port number
Dial ISDN port number (1, 2).

destination phone number

Dial destination phone number. (16 digits max.)
The availability of this service depends on your ISDN contract.

Denying Receiving Calls

Rejecting Incoming Calls (Do Not Disturb (DND))
You can reject calls using the following method. SLT and PT To forward a call destination to the destination extension no. extension
To forward a call to an operator To reject receiving calls

normal display

384010

dialled phone number
Manual dialling 15 seconds after Pressing REDIAL button Immediate Other quick diallings 10 seconds after

Display while dialling

Off-hook or press SP-PHONE and dial an outside line access code + a phone number.

CO 01 CONT

changes automatically

12:0030 ACCNT

384010 CONT TRM ACCNT
If the other party answers,
calling partys COLP number

CO 01 CONT TRM

0202020202 CONT TRM
your CLIP number (Skipped if not assigned.)
If the other party answers, CO01: 17.0 Charge

CONT TRM ACCNT

CO01: CONT TRM

180 ACCNT

If the other party doesnt answer, displays for the other partys COLP number and Charge Information are skipped. Your CLIP number is programmable by System Programming [404]. Before the calling party answers, the other partys COLP number and the charge information are displayed. As soon as the charge information is received, the information is shown on the display and the display after this starts from the dialled phone number (*) again. (See the above chart.) You can modify and call back the logged numbers. Refer to the Recording the Callers Information Automatically (Incoming Call Log).
System Programming (Section 3.4) [107] Charge Indication Selection ISDN Port Programming (Section 3.7) [404] CLIP / COLP Number Assignment System Programming (See page 48 in this manual) [902] System Additional Information
Selecting the CLIP/COLP numbers
You can select the CLIP/COLP numbers to be displayed to the other party depending on business or private use.

Setting the CLIP numbers

Any Telephone

business use private use

Dial 1 or 2. Conrmation tone On-hook.

Dial 61.

Setting the COLP numbers

Dial 62.

Your CLIP number will be displayed if the number is assigned by the System Programming [404]. Caller Identication (Caller ID) services can be denied depending on your COS level. If you select the same setting previously selected, a conrmation tone 2 and dial tone will be sent. ISDN Port Programming (Section 3.7) [404] CLIP / COLP Number Assignment COS Programming (Section 3.8) [512] Calling Line Identication Restriction (CLIR) [513] Connected Line Identication Restriction (COLR) Extension Programming (Section 3.9) [601] Class of Service

Quick Dialling Please add the following to the conditions. The callers name is programmable by PC programming. Dialling with a System To indicate the name on the display while receiving the Speed Dialling Button call, you must store the callers phone number with - (System Speed Dialling) (hyphen) after the line access code. Quick Dialling Dialling with a SAVE Button in Memo (Notebook Function) Before Leaving Your Desk Forwarding a Call (Call Forwarding) Caller Identication Services (for KX-T7230 / KX-T7235) Recording the callers Information (Incoming Call Log) Class of Service (COS) Please add the following to the conditions. When you store a phone number during a conversation, the current ISDN port access code is used. In on-hook status, the ISDN port access code is automatically chosen as 9. Please add the following to the conditions. You can use to store a PAUSE. 0 through 9 and are assignable (Call Forwarding to CO line). Please add the following to the conditions. While you are using the outside line, your extension also automatically records information about the call. (KX-T7235, KX-T7230, KX-T7431, KX-T7433, KX-T7436, KX-T7420, KX-T7425)

3.1 System Management

Please add the following programming items. 12) Sets Call Forwarding by ISDN Service Please add the following programming address. [517] Call Forwarding by ISDN Service Please add the following to Y, Delayed ringing selection. number 9 (disable) Please add the extension numbers 31.34. The Programming Table is on page 59.
3.7 ISDN Port [408][409] Programming Extension Ringing Assignment Day/Night for ISDN
Section of O/I Feature Title Item
3.10 LCR [701] LCR Carrier Code Please add the following to the conditions. To delete the current entry, press # after entering the route Programming number. 3.10 LCR [702] LCR Route Selection Code Programming [706] LCR Route Exceptional Code Please add the following to the conditions. To delete the current entry, press # after entering the route number.
3.10 LCR [703] LCR Authorization Please add the following to the conditions. Code To delete the current entry, press # after entering the ISDN Programming port number. 3.10 LCR [705] BTL Access Code Programming [707] LCR Leading Digit Entry Please add the following to the conditions. To delete the current entry, press # after entering the programming address.

3.10 LCR [701] LCR Carrier Code Please add the following to the conditions. to pause then send the remaining digits as Programming [703] LCR Authorization Enter Code DTMF. 3.10 LCR [702] LCR Route Selection Code Programming [706] LCR Route Exceptional Code Please add the following to the conditions. is used as a wildcard character that stands for any digit in a phone number.
3.12 Optional [902] System Additional To make this assignment effective, you must press the Information system reset switch after programming. Programming Area 2 Field 12 4.13 Expanding the ISDN Line Connection Please add the following to the conditions. The pin number assignment changes depending on how the extension / CO line switch socket is adjusted. (Refer to 4-14 of the Operating Instructions.),

Least Cost Routing (LCR)

Least Cost Routing (LCR) is a system programmable feature that automatically selects the least expensive route available at the time a long distance call is made. It is not necessary to dial the access code of the least expensive carrier. The chart below shows the procedure of the LCR feature.

Flow Chart of LCR

Is the dialled number an emergency call number? No Yes Yes
Is the dialled number the BTL access code? No
Does the rst digit match the leading digit? Yes
Removing and Adding the dialled number. Removing and Adding the dialled number. Removing and Adding the dialled number. Removing and Adding the dialled number.

BTL is selected. No

Does the area code match the route selection code of Route 1? No
Does the area code match the exceptional code of Route 1? Yes

Route 1 is selected.

Does the area code match the route selection code of Route 2? No
Does the area code match the exceptional code of Route 2? Yes

Route 2 is selected.

Does the area code match the route selection code of Route 3? No
Does the area code match the exceptional code of Route 3? Yes

Route 3 is selected.

Does the area code match the route selection code of Route 4? No
Does the area code match the exceptional code of Route 4? Yes

Route 4 is selected.

BTL is selected.
LCR Programming consists of the following items: Common Table (1) LCR Mode (Program [700]) This program is used to turn on or off the LCR mode. If turned on, calls are sent to the least expensive route to be used. (Default=Disable) (2) BTL Access Code Set (Program [705]) This program is used to store the British Telecom Line (BTL) Access Code. (Default=121) If the code is dialled, BTL is always selected even if the LCR mode is enabled. (3) LCR Leading Digit Entry (Program [707]) This program is used to store the leading digits of an area code to judge whether to select a route for the LCR feature. LCR Routing Plan Tables (Routes 1 through 4) (1) LCR Carrier Code (Program [701]) This is used to store each carriers access code. (2) LCR Route Selection Code (Program [702]) This is used to store area codes used for the LCR feature. (3) LCR Authorization Code (Program [703]) This is used to register an authorization code applied to each ISDN line and each route. (4) LCR Itemized Bill Code (Program [704]) This is used to assign whether to send an itemised bill code of an extension to each ISDN line or not. The itemised bill code corresponds to each extension number 2128 and 3034. (5) LCR Route Exceptional Code (Program [706]) This is used to store dialling numbers that are excepted from LCR routing plans of a specied carrier. (6) LCR Modify Removed Digit (Program [708]) This is used to remove the digits of the dialled number before sending to the exchange line. (7) LCR Modify Added Number (Program [709]) This is used to add the number to the dialled number before sending to the exchange line.

Please see [903] for your reference. To delete the entry, # after entering the extension number. DEFAULT CHANGE All DDI numbers Not stored. The Programming Table is on page 58.

Other changed items

Please change the word, Toll Restriction into Call Barring on the following pages. Section of O/I
P8-9, 2.3 Making Calls (P2-12, 14) (P2-16) 2.6 Others (P2-53.54) (P2-67.68) 3.1 System Management (P3-3) (P3-12) (P3-17.22) 3.4 System Programming (P3-28) 3.6 TRS Programming (P3-33) 3.8 COS Programming (P3-38) (P3-39) 3.12 Optional Programming (P3-52) 3.14 Programming Tables (P3-62) (P3-63) 5.4 Default Values (P5-10) 5.5 Specications (P5-14) Contents Outside Calling Quick Dialling Calling with Account Codes (Account Code Entry) Switching the Day/Night Calling Mode (Night Service) Class of Service Least Cost Routing Toll Restriction [101] Account Codes [300][304] TRS Denied Code Entry for Levels 2.6 [305][309] TRS Excepted Code Entry for Levels 2.6 [500][501] Toll Restriction Level Day / Night [506][507] Toll Restriction Level for System Speed Dialling Day/Night [902] System Additional Information Area 2 Field 03 [500][501] Toll Restriction Level Day / Night [506][507] Toll Restriction Level for System Speed Dialling Day / Night

2.2 Initial Settings

Customising the Buttons on Your Telephone Quick Dialling Dialling with a Station Speed Dialling Button (Station Speed Dialling) Dialling Simply by Going Off-Hook (Pickup Dialling) Dialling the Stored Number with a SAVE Button (Notebook Function) Quick Dialling Dialling with a SAVE Button in Memo (Notebook Function) Transferring Calls
Please change the PROGRAMMING INPUT for the FUNCTION Log-in/Log-out from 8 into 80. Please replace as follows in the conditions;.Enter for a - (hyphen). Enter for a PAUSE. If there is a PAUSE in the assigned numbers, the numbers after the PAUSE are sent as DTMF signals.
2.3 Making Calls 2.3 Making Calls 2.3 Making Calls
Please change as follows. When you store the phone number, you dont have to dial ISDN port access code (9, 81or 82). The ISDN port access numbers are 9,81 and 82. For the operation, Transferring a Call to CO Line (Call Transfer to CO Line), you must perform the following operations, Wait for an answer and Announce, even though the manual states Omit if not necessary. Please execute in proper order. If the operation below is performed, the current call will be held instead of being terminated. PT While hearing a Call Waiting tone;

CO OR INTERCOM

Talk to the new caller.

Call Waiting

Press ashing CO or INTERCOM.
Alarm Setting (Timed Reminder)
Please add the following condition; If you receive an incoming call, ringing starts after the alarm stops sounding. If you receive an incoming outside call in the 1:N status during the alarm, the ringing starts after the alarm stops sounding.

 

Technical specifications

Full description

KX-TD500 Phone Systems Can be reused on Panasonic KX-TDA50G - KX-TDA100 - KX-TDA200 - KX-TDA600 - KX-TDE100 - KX-TDE200 - KX-NCP500 and KX-NCP1000 Telephone Systems on a Digital Extension Port - Requires Larger or Extra Power Supply depending upon system 1-Line 16 Character LCD Readout 12 Programmable Line Buttons Jog Dial Control provides easy access to both system and personal speed dial lists - controls speaker and handset volume/contrast XDP -eXtra Device Port-- Jack- Allows you to connect a Single Line Phone or Device to the phone as an additional extension - or as the same extension Hands-Free Speakerphone Whisper Off-Hook Call Announce -WOHCA-- Automatic Redial Auto Answer/Mute Headset Compatible with Amplifier -Documents- Panasonic KX-T7431 Documents: Panasonic KX-7400 Series Brochure Panasonic KX-T7400 Series Comparison Chart"

 

Tags

Communicator KL-40WA1K Model 4450 RT37masw Flash AX 410 DVP-NS50p-S DMR-EH49 HW-C1260tve Me-U E2120 DVD957 001 EMS2120S Phone WF-T6600PP UF-S1 Mitsubishi G15B EOB53000 Eu R08 FMT990XE Tube PAC Dect6231S HR6835 LD-14AW3 Tetris DS VP-DC565WI Aclea Zoom HD8 Voicemail GR26sbtmr ONE 140 KDL-32U2530 KV-21CL10K ESF2435 UR5U-8800L HVR-M25AN CQ-C3301N MP-FUB30 ES-4815 CU-L43dbe5 Lullaby LX Revolution 2300 DPF-D72n BQ SE1401B 2343NW Mini260 AJL305 HD300LJ DVR-4TL-160 KDL-55EX710 RM-LP205 Timex W-33 PG-M15X D6510 DVR 2500 CD1453B-19 50 SM 6 0 Aspire 1520 28PT4406 USR5417 D-CJ501 LS650P LG U830 2020 SD2005 Anti-calc Gigaset C340 DLS B6A 4 3 FC1200W Deluxe Ddle21basis DCR-PC109 Samsung U5 Bladesystem Mamiya ZD LM760S Dect 511 GT-E1086l A 130FG-M CM-64 Powershot A480 ER-508 Servers 6 1PP Headset MRV-1507 Janes-longbow 2 KCA-IP300V MH6387AR Instructions MPK-THC 42WS90E3 GP-1650WDF Cronometro 300 User User Guide JAX-N77 38 E P5500 Digimax 430 MG-10 Samsung B100 V2100 Advw771 TX-DS676

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101