TCD210_220E_QG(e).fm Page 1 Tuesday, December 21, 2004 11:26 AM

Digital Cordless Phone

Model No.

KX-TCD210E KX-TCD220E

Digital Cordless Answering System

Quick Guide

Please read the operating instructions for further details.

Controls

Handset
A B C D E F Speaker Charge contact {j/OK} (Menu/OK) {k} (Phonebook) {C} (Talk) Navigator key L {e}{v}: To search for the desired item in menus. L {>}: To select the desired item or move the cursor to the right. L {<}: To return to the previous screen or move the cursor to the left. {s} (Speakerphone) {R} (Recall) Receiver Display {R} (Redial/Pause) {ih} (Off/Power) {C/T} (Clear/Mute) Dial keypad L The icons printed below the dial keys shown in the illustration (g, d, etc.) are found on the KX-TCD220 only. These icons indicate answering system operations. {INT} (Intercom) Microphone

J C D E F G K

G H I J K L M N
*The pictured model is KX-TCD220.
TCD210_220E_QG(e).fm Page 2 Tuesday, December 21, 2004 11:26 AM

Base unit

A Answer on indicator (KX-TCD220 only) B {x} (Page) C Charge contact

Displays

Display icons
Various icons appear on the handset display to indicate the current status of the unit. w Within range of a base unit L When flashing: Handset is searching for base unit. (out of range of base unit, handset is not registered to base unit, no power on base unit) Handset is accessing base unit. (intercom, paging, changing base unit settings, etc.) Handset is on an outside call. Call bar is on. Answering system is on. (KXTCD220 only) Battery strength Voice enhancer is set to high or low tone. [N] [X] [2] -2Night mode is on. Key lock is on. Handset number: The left icon shows handset 2 example. Base unit number: The left icon shows base unit 2 example. New SMS message received (SMS users only) Line is being used by another handset.

F [IN USE]

k o u 5 [VE]
TCD210_220E_QG(e).fm Page 3 Tuesday, December 21, 2004 11:26 AM

Connections

When the AC adaptor is connected, a short beep will be heard. If it is not heard, check the connections. Important: L Use only the AC adaptor and telephone line cord supplied with this unit. Note: L Never install telephone wiring during a lightning storm. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

(220240 V, 50 Hz)

To telephone network

Battery installation

Insert the batteries negative (T) terminal first. Close the handset cover. Place the handset on the base unit for about 7 hours before initial use.
*The pictured model is KX-TCD210. Note: L Use only rechargeable batteries.
TCD210_220E_QG(e).fm Page 4 Tuesday, December 21, 2004 11:26 AM

Turning the power on

Press {ih} for about 1 second.
Setting the date and time 5 6
Press {j/OK}. Select Handset Setup, then press {>}. Select Time Settings, then press {>}. Select Set Date & Time, then press {>}. Enter the current day, month and year by selecting 2 digits for each. Enter the current hour and minute by selecting 2 digits for each. L You can select AM, PM or 24-hour time entry by pressing {*} repeatedly.
7 Press {j/OK}. 8 Press {ih}.

Basic operations

Feature To turn the power off To make a call To turn on the speakerphone To hang up To adjust the receiver or speaker volume To redial the last number dialled To make a call using the redial list To answer a call To mute your voice during a call To store a name and phone number in the handset phonebook Operation Press {ih} for about 2 seconds. Dial the phone number, then press {C}. Press {s}. Press {ih}. Press {e} or {v} while talking. Press {R}, then press {C}. Press {R}. Press {e} or {v} repeatedly to select the desired number, then press {C}. Press {C}. Press {C/T}. To return to the conversation, press {C/T} again. Press {k}, {j/OK}, select New Entry, then press {>}. Enter the partys name (16 characters max.), then press {j/OK}. Enter the partys phone number (24 digits max.), then press {j/OK}. Select the desired category for the entry, then press {>}. Select Save, then press {>}. Press {ih}. L To enter a name, see the character table in the operating instructions.
TCD210_220E_QG(e).fm Page 5 Tuesday, December 21, 2004 11:26 AM

Feature To make a call using the handset phonebook To adjust the handset ringer volume
Operation Press {k}. Press {e} or {v} repeatedly to display the desired entry, then press {C}. Press {j/OK}. Select Handset Setup, then press {>}. Select Ringer Setup, then press {>}. Select Ringer Volume, then press {>}. Press {e} or {v} repeatedly to select the desired volume. Press {>}, then press {ih}. Press {j/OK}. Select Handset Setup, then press {>}. Select Ringer Setup, then press {>}. Select Ext. Ringtone, then press {>}. Select the desired ringtone, then press {>}. Press {ih}.
To change the ringtone used by the handset for outside calls
Answering system (KX-TCD220 only) Feature To turn the answering system on/off Operation Press {j/OK}. Select Answer System, then press {>}. Select Answer On or Answer Off, then press {>}. Press {ih}. Press {j/OK}. Select Answer System, then press {>}. Select Play New Msg. or Play All Msg., then press {>}.
To listen to new/all messages
TCD210_220E_QG(e).fm Page 6 Tuesday, December 21, 2004 11:26 AM
Sales and support information
Customer Care Centre L For UK customers: 076 L For Republic of Ireland customers: L Visit our website for product information: www.panasonic.co.uk L E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Friday, 9:00 am - 5:30 pm. (Excluding public holidays) L Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk L Most major credit and debit cards accepted. L All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. L It couldnt be simpler! L Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details. Customer Care Helpline Tel. No.: U.K. 076 / R.O.I. 01289 8333

PQQW13650ZA

DC1204FD0