Reviews & Opinions
Independent and trusted. Read before buy Panasonic KX-TG1062!

Panasonic KX-TG1062

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Panasonic KX-TG1062, size: 3.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic KX-TG1062About Panasonic KX-TG1062
Here you can find all about Panasonic KX-TG1062 like manual and other informations. For example: .

Panasonic KX-TG1062 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic KX-TG1062 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Panasonic KX-TG1062 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
fievebr 7:19am on Thursday, October 28th, 2010 
I had been buying cheap phones for years and always disappointed in the range or sound quality.
Bill Bellomy 4:15pm on Thursday, September 16th, 2010 
The corded base unit means at least the base unit will work during a power failure. This feature is getting hard to find. Great cordless phone. Looks great wallmounted. Simple and easy to setup and use None thus far Very nice phone, great sound, nice features, handsome design.
markcc 6:49pm on Wednesday, September 15th, 2010 
Wonderful design. Easy installation. Easy To Set Up","Good Sound","Good Speakerphone","Nice Features DIFFICULT INTERCOM SETUP
essertier 11:09am on Friday, July 16th, 2010 
With Call blocking The Panasonic KX-TG106x (x = number of handsets included) phone system works very well, sound quality & volume are quite good. panasonic phone just what i wanted, convenience of cordless phone, plus necessity of corded phone, since our power is out 15 plus times each winter
jb1809 2:41pm on Saturday, June 12th, 2010 
This phone system is fantastic. I bought it to replace a similar GE system that was more expensive, horrible and died. This set up works great for a family always searching for a handfree phone to use.
shortblock 8:14pm on Tuesday, April 6th, 2010 
Best of Class If you are in the market for an excellent corded base unit and up to 6 cordless units, look no further, this is the system for you.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

No. Accessory item/Order number AC adaptor/PQLV219Z Telephone line cord/PQJA10075Z Wall mounting adaptor/PNKL10035Z1 Corded handset/PNLXP1006Z Corded handset cord/PQJA212V Rechargeable batteries/HHR-4DPA (Part No. HHR-55AAABU or N4DHYYY00004) Handset cover*1/PNYNTGA641TR Belt clip/PNKE1029Z1 Charger/PNWETG6412M Quantity KX-TG2 KX-TG4 KX-TG6
*1 The handset cover comes attached to the handset. 7
For assistance, please visit http://www.panasonic.com/help
TG106x(e).book Page 4 Friday, January 16, 2009 10:45 AM
Introduction Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 56). Accessory item Rechargeable batteries Order number HHR-4DPA*1 L To order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery requirement: Nickel metal hydride (Ni-MH) type battery 2 AAA (R03) batteries for each of every handsets Headset T-adaptor KX-TCA60, KX-TCA86, KX-TCA92, KX-TCA93, KX-TCA94 KX-J66
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
Expanding your phone system
You can expand your phone system by registering optional handsets (6 max.) to a single base unit.
Handset (optional): KX-TGA106
TG106x(e).book Page 5 Friday, January 16, 2009 10:45 AM

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection L Use only the power source marked on the product. L Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. L Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. L Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. L Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211-PANA (1-800-211-7262). L Unplug from power outlets and never touch the inside of the product if its casing has been broken open. L Never touch the plug with wet hands. Danger of electric shock exists. Installation L To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. L Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. L Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards L Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. L Do not disassemble the product. L Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. L Do not excessively pull the corded handset cord from the base unit. This may cause the base unit to fall, resulting in injury. Medical L Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.
Important safety instructions
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. L For maximum coverage and noise-free communications, place your base unit: at a convenient, high, and central location with no obstructions between the cordless handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) L Coverage and voice quality depends on the local environmental conditions. L If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception.

Specifications

Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Frequency range: 1.92 GHz to 1.93 GHz RF transmission power: 115 mW (max.) Power source: 120 V AC, 60 Hz Power consumption: Base unit: Standby: Approx. 1.3 W Maximum: Approx. 2.0 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 3.3 W Operating conditions: 0 C 40 C (32 F 104 F), 20 % 80 % relative air humidity (dry)
TG106x(e).book Page 7 Friday, January 16, 2009 10:45 AM

Date and time

Y Handset
{MENU} i {#}{1}{0}{1} Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2009 {0}{7} {1}{5} {0}{9} {OK} Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Example: 9:30 {0}{9} {3}{0} {AM/PM}: Select AM or PM. {SAVE} i {OFF}

Display language

You can select either English or Espaol as the display language. The default setting is English. = Base unit / Y Handset
{MENU} i {#}{1}{1}{0} {V}/{^}: Select the desired setting. Press the middle soft key to save. Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF}

Voice guidance language

You can select either English or Espaol as the voice guidance language of the answering system. The default setting is English. Y Handset
Note: L When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. L To correct a digit, press {^} or {V} to move the cursor to the digit, then make the correction. L The date and time may be incorrect after a power failure. In this case, set the date and time again.
{MENU} i {#}{1}{1}{2} {V}/{^}: Select the desired setting. {SAVE} i {OFF}

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. Y Handset
{MENU} i {#}{1}{2}{0} {V}/{^}: Select the desired setting. {SAVE} i {OFF}
TG106x(e).book Page 13 Friday, January 16, 2009 10:45 AM

Making calls

Using the base unit = 1 Dial the phone number.
L To correct a digit, press {CLEAR}.
Adjusting the receiver or speaker volume
= Base unit / Y Handset Press {^} or {V} repeatedly while talking.
Lift the corded handset. When you finish talking, place the corded handset on the cradle.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the redial list in each unit (each 48 digits max.). = Base unit / Y Handset
Note: L You can also dial the phone number after lifting the corded handset. Using the speakerphone
{REDIAL} {V}/{^}: Select the desired phone number. Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C}
During a conversation with the corded handset, press {SP-PHONE} to turn on the speakerphone. L You can place the corded handset on the cradle. L Speak into the base unit microphone. L Speak alternately with the other party. When you finish talking, press {SP-PHONE}.
Erasing a number in the redial list
{REDIAL} {V}/{^}: Select the desired phone number. i {ERASE} (soft key) {V}/{^}: Yes i {SELECT} Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF}

During an outside call, press {C}. {V}/{^}: Select the desired entry. Press {CALL} to dial the number.
Press the desired speed dial button. Lift the corded handset.
Note: L When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press {PAUSE} to add pauses after the number and PIN as necessary (page 13). L If you have rotary/pulse service, you need to press {*} before pressing {C} in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding {*} to the beginning of phone numbers you wish to chain dial (page 16).
Note: L In step 1, if no phone number is stored to the speed dial button, you can assign a number by pressing {C} and continue from step 1, Assigning a phonebook entry to a speed dial button, page 18. Canceling a speed dial assignment
Press the desired speed dial button. i {ERASE} (soft key) {V}/{^}: Yes i {SELECT}

Speed dial

You can assign 1 phone number from the phonebook to each of the 5 speed dial buttons. = Base unit Assigning a phonebook entry to a speed dial button
Index card Use the index card to record the names/phone numbers stored to the speed dial buttons.

Memory card

Find the desired entry (page 17). Press the speed dial button you want to assign to. i {SELECT} L If Overwrite is displayed, the button you selected has a phone number already assigned to it. To overwrite with the currently selected phone number, go to step 3. To select another button, press {BACK}, then repeat this step. {SELECT} i {} (EXIT)
TG106x(e).book Page 19 Friday, January 16, 2009 10:45 AM
Copying phonebook entries
You can copy phonebook entries from the base unit to a handset, and vice versa. Important: L Groups (including their names and ringer tones) are not copied. L You cannot make phonebook copy between handsets directly. However it is possible by first copying a handsets phonebook entries to the base unit, then copying the base units phonebook entries to another handset.
{C} i {MENU} {V}/{^}: Copy all to base i {SELECT} L When all entries have been copied, Completed is displayed. {OFF}

Copying an entry

= Base unit
Find the desired entry (page 17). i {MENU} {V}/{^}: Copy i {SELECT} Enter the handset number to copy to. L When an entry has been copied, Completed is displayed. L To continue copying another entry: {V}/{^}: Yes i {SELECT} i Find the desired entry (page 17). i {SELECT} {} (EXIT) Y Handset
Find the desired entry (page 17). i {MENU} {V}/{^}: Copy to base i {SELECT} L When an entry has been copied, Completed is displayed. L To continue copying another entry: {V}/{^}: Yes i {SELECT} i Find the desired entry (page 17). i {SELECT} {OFF}

Copying all entries

{C} i {MENU} {V}/{^}: Copy all i {SELECT} Enter the handset number to copy to. L When all entries have been copied, Completed is displayed. {} (EXIT) For assistance, please visit http://www.panasonic.com/help

TG106x(e).book Page 29 Friday, January 16, 2009 10:45 AM
Caller ID Service Editing a callers phone number before calling back
You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. = Base unit / Y Handset
Caller ID number auto edit feature
Once you call back an edited number, the unit remembers the Area Code and Format of the Edited Number. Next time when someone calls from the same Area Code, caller information is customized by the unit as follows: When the call is being received, the Caller ID number is displayed in the same Format as the Edited Number. After the call is ended, the phone number of the caller, when reviewed from the Caller list, is displayed in the same Format as the Edited Number. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. Note: L Phone numbers from the 4 most recently edited area codes are automatically edited. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. Turning Caller ID auto edit on/off = Base unit / Y Handset
Proceed with the operation for your unit. Base unit: {CID} Handset: {MENU} i {V}/{^}: Caller list i {SELECT} {V}/{^}: Select the desired entry. Press {EDIT} repeatedly until the phone number is shown in the desired format. 1 Local phone number Example:

321-5555

2 Area code Local phone number Example:

555-321-5555

Area code Local phone number Example:

1-555-321-5555

Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C}
{MENU} i {#}{2}{1}{4} {V}/{^}: Select the desired setting. {SAVE} Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF}
TG106x(e).book Page 30 Friday, January 16, 2009 10:45 AM
Caller ID Service Erasing selected caller information
Proceed with the operation for your unit. Base unit: {CID} Handset: {MENU} i {V}/{^}: Caller list i {SELECT} {V}/{^}: Select the desired entry. {ERASE} (soft key) i {V}/{^}: Yes i {SELECT} Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF}
Erasing all caller information
Proceed with the operation for your unit. Base unit: {CID} Handset: {MENU} i {V}/{^}: Caller list i {SELECT} {ERASE} (soft key) i {V}/{^}: Yes i {SELECT} Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF}

TG106x(e).book Page 32 Friday, January 16, 2009 10:45 AM
Answering System Using a pre-recorded greeting message
The unit provides 2 pre-recorded greeting messages: If you erase or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. If the message recording time (page 35) is set to Greeting only, callers messages are not recorded and the unit plays a different prerecorded greeting message asking callers to call again. Erasing your greeting message (Resetting to a pre-recorded greeting message) If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. Y Handset {MENU} i {#}{3}{0}{4} i {YES} i {OFF}
Operating the answering system during playback
Key {^} or {V} {7} {8} {PAUSE} Operation Adjust the speaker volume Repeat message*1 Skip message Pause message To resume playback, press {6}. Stop playback Erase currently playing message

{} (STOP) {ERASE}

*1 If pressed within the first 5 seconds of a message, the previous message is played.
Calling back (Caller ID subscribers only)
If caller information was received for the call, you can call the caller back while listening to a message. Lift the corded handset during playback. L To edit the number before calling back, press {EDIT} repeatedly until the phone number is shown in the desired format (page 29).
Playing back the greeting message
{MENU} i {#}{3}{0}{3} {OFF}

Erasing all messages

Press {ERASE} 2 times while the unit is not in use.
Listening to messages using the base unit
When new messages have been recorded: New message is displayed. The message indicator on the base unit flashes. Press {6}. L If new messages have been recorded, the base unit plays back new messages. L If there are no new messages, the base unit plays back all messages.
TG106x(e).book Page 33 Friday, January 16, 2009 10:45 AM
Listening to messages using the handset
When new messages have been recorded: New message is displayed. The message indicator on the handset flashes slowly if the message alert feature is turned on (page 36).
Key {0} {*}{4}*3 {*}{5} {*}{6}
Operation Turn answering system off Erase currently playing message Erase all messages Erase greeting message*4
{MENU} i {PLAY} L If new messages have been recorded, the handset plays back new messages. L If there are no new messages, the handset plays back all messages. When finished, press {OFF}.
*1 If pressed within the first 5 seconds of a message, the previous message is played. *2 Ring count is displayed first. *3 You can also erase as follows: {ERASE} i {V}/{^}: Yes i {SELECT} *4 Unit resets to a pre-recorded greeting message.

Number of rings before the unit answers a call
You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 34), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. Y Handset

Callers recording time

You can change the maximum message recording time allotted to each caller. You can also select Greeting only which sets the unit to greet callers but not record messages. The default setting is 3min. Y Handset
{MENU} i {#}{3}{0}{5} {V}/{^}: Select the desired setting. i {SAVE} i {OFF}
{MENU} i {#}{2}{1}{1} {V}/{^}: Select the desired setting. i {SAVE} i {OFF}
Note: L When you select Greeting only: If you do not record your own message, the unit will play the pre-recorded greeting-only message asking callers to call again later. If you use your own message, record the greeting-only message asking callers to call again later (page 31).
TG106x(e).book Page 36 Friday, January 16, 2009 10:45 AM
L When Greeting only is selected, C is displayed on the base unit.

Message alert

You can select whether or not the message indicator on the handset flashes slowly when new messages are recorded. The default setting is Off. Important: L The message indicator also flashes for newly recorded voice mail messages (page 37). Y Handset
{MENU} i {#}{3}{4}{0} {V}/{^}: Select the desired setting. i {SAVE} i {OFF}
Note: L While message alert is on, battery operating time is shortened (page 9).
Turning the call screening on/off
You can set the call screening feature On or Off. For details, see page 31. The default setting is On. = Base unit / Y Handset
{MENU} i {#}{3}{1}{0} {V}/{^}: Select the desired setting. i {SAVE} Proceed with the operation for your unit. Base unit: {} (EXIT) Handset: {OFF}
TG106x(e).book Page 37 Friday, January 16, 2009 10:45 AM

Voice mail service

Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone companys voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please contact your service provider/telephone company for details of this service. Important: L To use the voice mail service provided by your service provider/telephone company rather than the units answering system, turn off the answering system (page 31). For details, see page 35.

Answering an intercom call
Lift the corded handset or press {INTERCOM} to answer the page. When you finish talking, place the corded handset on the cradle or press {INTERCOM}. Y Handset
Press {C} to answer the page. When you finish talking, press {OFF}.

Handset locator

You can locate a misplaced handset by paging it.

Making an intercom call

Base unit: {LOCATOR} L All registered handsets beep for 1 minute. To stop paging: Base unit: Press {LOCATOR}. Handset: Press {C}, then press {OFF}.
Proceed with the desired operation. When 1 handset is registered: Press {INTERCOM}. When 2 or more handsets are registered: Press {INTERCOM}. To page a specific handset, enter the handset number. To page all handsets, press {0} or wait for a few seconds. L Lift the corded handset if needed. L To stop paging, press {INTERCOM}.
Transferring calls, conference calls
Outside calls can be transferred or a conference call with an outside party can be made: between the base unit and handset between 2 handsets = Base unit
When you finish talking, press {INTERCOM} or place the corded handset on the cradle. Y Handset
{MENU} i {#}{2}{7}{4} To page the base unit, press {0}. To page another handset, enter its extension number. L To stop paging, press {OFF}. When you finish talking, press {OFF}.
Proceed with the desired operation. When 1 handset is registered: During an outside call, press {INTERCOM}. When 2 or more handsets are registered: During an outside call, press {INTERCOM}. To page a specific handset, enter the handset number. To page all handsets, press {0} or wait for a few seconds.
TG106x(e).book Page 39 Friday, January 16, 2009 10:45 AM

Intercom/Locator 2 3

Wait for the paged party to answer. L If paged party does not answer, press {INTERCOM} to return to the outside call. Proceed with the desired operation. To transfer the call: Place the corded handset on the cradle. L The outside call is being routed to the handset. To establish a conference call: Press {CONF}. L To leave the conference, place the corded handset on the cradle. Other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}. Y Handset Transferring a call without speaking to the other handset or base unit user = Base unit
Proceed with the desired operation. When 1 handset is registered: During an outside call, press {INTERCOM}. When 2 or more handsets are registered: During an outside call, press {INTERCOM}. To page a specific handset, enter the handset number. To page all handsets, press {0} or wait for a few seconds. Place the corded handset on the cradle. L The outside call rings at the other unit.

During an outside call, press {HOLD} to put the call on hold. L To return to the outside call, press {BACK}. To page the base unit, press {0}. To page another handset, enter its extension number. Wait for the paged party to answer. L If the paged party does not answer, press {C} to return to the outside call. Proceed with the desired operation. To transfer the call: Press {OFF}. L The outside call is being routed to the destination unit. To establish a conference call: Press {CONF}. L To leave the conference, press {OFF}. The other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}.
During an outside call, press {HOLD} to put the call on hold. L To return to the outside call, press {BACK}. To page the base unit, press {0}. To page another handset, enter its extension number. {OFF} L The outside call rings at the other unit.
Note for base unit and handset: L If the other user does not answer the call within 1 minute, the call rings at your unit again. Answering a transferred call = Base unit Lift the corded handset or press {SP-PHONE} to answer the page. Y Handset Press {C} to answer the page. Note for base unit and handset: L After the paging party disconnects, you can talk to the outside caller.
TG106x(e).book Page 40 Friday, January 16, 2009 10:45 AM

Wall mounting

Base unit 1 Connect the AC adaptor and telephone line
cord. Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. L The word UP should face upward.
Charger 1 Drive the screws (not supplied) into the wall.

25.4 mm (1 inch)

Screws (120 V AC, 60 Hz)
Mount the charger (A), then slide it down (B) and to the right (C) until it is secure.
Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use the round cut out at the bottom of the adaptor if you are using the 4 inch phone plate), then slide the unit down to secure it. Connect the AC adaptor to power outlet (page 8). L There are 2 common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed.

Belt clip

To attach To remove
TG106x(e).book Page 41 Friday, January 16, 2009 10:45 AM

Error messages

If the unit detects a problem, one of the following messages is shown on the display. Display message Busy Cause/solution L The called unit is in use. L Other units are in use and the system is busy. Try again later. L The handset you are using is too far from the base unit. Move closer and try again. L The handsets registration may have been canceled. Reregister the handset (page 27). L The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 8). L Recording was too short. Try again. L Phonebook copy failed (page 19). Confirm the other unit (the receiver) is in standby mode and try again. L Phonebook copy is incomplete. The receivers phonebook memory is full. Erase the unnecessary phonebook entries (page 17) from the other unit (the receiver) and try again. L The phonebook memory is full. Erase unnecessary entries (page 17). L Message memory is full. Erase unnecessary messages (page 32, 33). L Message memory is full. Erase unnecessary messages (page 32, 33). L The handset has lost communication with the base unit. Move closer to the base unit and try again. L Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handsets registration may have been canceled. Reregister the handset (page 27). L You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. L A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 5.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
TG106x(e).book Page 47 Friday, January 16, 2009 10:45 AM
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference. FCC RF Exposure Warning: L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body (excluding extremities of hands, wrist and feet). L This product may not be collocated or operated in conjunction with any other antenna or transmitter. L The handset may be carried and operated with only the specific provided belt-clip. Other non-tested beltclips or similar body-worn accessories may not comply and must be avoided. Notice L FCC ID can be found inside the battery compartment or on the bottom of the units. Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.
Compatible with Hearing Aid T-Coil

TIA-1083

TG106x(e).book Page 48 Friday, January 16, 2009 10:45 AM

Instalacin

Unidad base L Use slo el adaptador de corriente Panasonic PQLV219 incluido. Oprima firmemente el contacto.

Correcto

Unidad base Clic Gancho

Incorrecto

Customer services

Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262), Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST. TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.) Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks.) TTY users (hearing or speech impaired users) can call 1-866-605-1277.
TG106x(e).book Page 57 Friday, January 16, 2009 10:45 AM
Warranty (For United States and Puerto Rico)
PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Telephone Products Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (Limited Warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. Parts Labor One (1) Year One (1) Year During the Labor Limited Warranty period there will be no charge for labor. During the Parts Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Ship-In Service For assistance in the continental United States and Puerto Rico in obtaining repairs please ship the product prepaid to: PSTC (Panasonic) Exchange Center, 4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503 panacare@us.panasonic.com When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. For Limited Warranty service for headsets if a headset is included with this product please follow instructions above. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

TG106x(e).book Page 58 Friday, January 16, 2009 10:45 AM
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
When you ship the product
L Carefully pack your unit, preferably in the original carton. L Attach a letter, detailing the symptom. L Send the unit to PSTC (Panasonic) Exchange Center, prepaid and adequately insured. L Do not send your unit to Panasonic Consumer Electronics Company listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products.
TG106x(e).book Page 59 Friday, January 16, 2009 10:45 AM
I Intercom: 38 Key tone: 22 Line mode: 23
A Additional handset: 27 Alarm: 25 Answering calls Base unit: 14 Handset: 14 Answering system Call screening: 31 Erasing messages: 32, 33, 34 Greeting only: 35 Listening to messages: 32, 33, 34 Number of rings: 35 Recording time: 35 Remote access code: 34 Remote operation: 34 Ring count: 35 Toll saver: 35 Turning on/off: 31, 35 Auto talk: 14 Battery: 8, 9 Belt clip: 40 Call block: 26 Caller ID number auto edit: 29 Caller ID service: 28 Caller list: 28 Caller list edit: 29 Call share: 15 Call waiting: 15 Call Waiting Caller ID: 15 Chain dial: 18 CID (Caller ID): 28 Conference calls: 38 Customer support: 22 Date and time: 12 Dialing mode: 12 Direct commands: 22 Display Contrast: 22 Language: 12 Error messages: 41 Flash: 15, 23 Greeting message: 31 Group ringer tone: 28 Handset Deregistration: 27 Locator: 38 Registration: 27 Hold: 14

M Making calls Base unit: 13 Handset: 13 Memory full: 17, 32, 33, 41 Messages full: 31, 32, 33, 41 Missed calls: 28 Mute: 15 P Pause: 13 Phonebook: 16 Power failure: 9 Redialing: 13 Ringer tone: 23 Ringer volume: 14 Rotary/pulse service: 15 Silent mode: 25 Speed dial: 18 SP-PHONE (Speakerphone): 13 Temporary tone dialing: 15 Time adjustment: 23 Transferring calls: 38 Troubleshooting: 42 TTY: 56 VM (Voice mail): 37 Voice guidance language: 12 Voice mail: 35, 37 Volume Receiver: 13 Ringer (Base unit): 23 Ringer (Handset): 14, 23 Speaker: 13

W Wall mounting: 40

E F G H
TG106x(e).book Page 60 Friday, January 16, 2009 10:45 AM

IMPORTANT!

If your product is not working properly.
1. Read these Operating Instructions 2. Visit our website: http://www.panasonic.com/help
L FAQs and troubleshooting hints are available.
3. Contact us via the web at: http://www.panasonic.com/contactinfo 4. Call us at: 1-800-211-PANA (1-800-211-7262)
L Monday - Friday 9:00am - 9:00pm (EST), Saturday/Sunday 10:00am - 7:00pm (EST)
To order replacement batteries, call 1-800-332-5368 or visit http://www.panasonic.com/batterystore
For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No. (found on the bottom of the base unit) Name and address of dealer Date of purchase
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. Panasonic Communications Co., Ltd. 2009

PNQX1800YA

CC1208SY1019

 

Tags

LP-1500C MP560 Motion 3 PM-G700 Voyage 200 BH-100 G818scvi 3000CN 2 Jose Mp41 7200C DPH-540 Armitron M591 TH-42PX70BA Pokemon 735-ME CT-310 Sport CSM3PL DVD-606 Divx MA350 MS-7380 35CDI GC KX-T7731 2400-103 International 212R Express 11540 Fostex B-16 BS900 Rider YST-M20DSP Cookers Bizhub 360 SX-203RDS SPF-72H Satio U1I ES55 Pink SX-KN901 OZ-590A W2242T-BFT DH-315D Jupiter-6 SP6000 Underworld Deville 1995 NV7-133R Legend CX-2600 G 649 I915GV T Pentax MX HTC 1000 Assault Power F6 MDS 9124 Alan 443 LH-R5500SB W6441 SCP-55 A-9911 Subwoofer DSC-W220 B SGH-T339 2232C MPA 2 Adapater Universal 21PT166A RHC-10 Tungsten T5 TX-32LXD60 Mc FX-980 Sportband 750C Plus LSC27910ST LS753 HT-THX25R ERN29601 SV-3700 Malibu 2000 MR-8 Mk2 F5D9230-4 DV-HR350 LE40C653 Ii 60 Dect 221 TC-WR661 W660I AL1916W SB-16B GT720 LP1200DXR GDM-W900 T9650 Officejet V40 DM-0530 Humminbird RF25

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101