Reviews & Opinions
Independent and trusted. Read before buy Panasonic KX-TG6073!

Panasonic KX-TG6073

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic KX-TG6073, size: 2.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic KX-TG6073About Panasonic KX-TG6073
Here you can find all about Panasonic KX-TG6073 like manual and other informations. For example: review.

Panasonic KX-TG6073 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic KX-TG6073 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Panasonic KX-TG6073 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 3. Page 1 of 1. Average Rating:
jonnywombat 9:40pm on Thursday, August 19th, 2010 
Nice product After doing my research, I found this as excellent phone with crystal clear voice clarity, LCD display is good.
carlitoslinux 12:52pm on Thursday, August 5th, 2010 
This is an excellent set of telephones. We have always been avid users of Uniden telephones, but this group of Panasonic phones is equal.
EJ 8:59am on Wednesday, March 17th, 2010 
display quit after a year This was a good system with all the features we wanted in a phone until the display on one of the handsets went blank. Perfect Phone Talk about user friendly, this phone is. The quality is excellent, everything works like it should per instructions, and no glitches.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

SAVE THESE INSTRUCTIONS

TG607X.book Page 7 Tuesday, December 12, 2006 1:56 PM

WARNING:

L To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. L Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211PANA (1-800-211-7262).

CAUTION:

Installation L Never install telephone wiring during a lightning storm. L Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. L Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. L Use caution when installing or modifying telephone lines. L Do not touch the plug with wet hands. L The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. Battery To reduce the risk of fire or injury to persons, read and follow these instructions. L Use only the battery(ies) specified. L Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions.
L Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. L Exercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns. L Charge the battery(ies) provided, or identified for use with the product only, in accordance with the instructions and limitations specified in this manual. Medical L Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of 5.76 GHz to 5.84 GHz, and the power output is 200 mW (max.).) Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
TG607X.book Page 8 Tuesday, December 12, 2006 1:56 PM

For best performance

Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. L For maximum coverage and noisefree communications, place your base unit: at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices or other phones. avoid facing radio frequency transmitters, such as external antennas of mobile phone cell stations (avoid putting the base unit on a bay window or near a window). L Coverage and voice quality depends on the local environmental conditions. L If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment L Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. L The product should be kept free from excessive smoke, dust, high temperature, and vibration. L The product should not be exposed to direct sunlight. L Do not place heavy objects on top of the product. L When you leave the product unused for a long period of time, unplug the product from the power outlet.
L The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 5 C (41 F) or greater than 40 C (104 F). Damp basements should also be avoided. L The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. L Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care L Wipe the outer surface of the product with a soft moist cloth. Do not use benzine, thinner, or any abrasive powder.
TG607X.book Page 9 Tuesday, December 12, 2006 1:56 PM

Setting up the base unit

Connecting the AC adaptor and telephone line cord
Connect the telephone line cord until it clicks into the base unit and telephone line jack (A). Connect the AC adaptor cord (B) by pressing the plug firmly (C). L Use only the included Panasonic AC adaptor PQLV203.
If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following: Noise is heard during conversations. Caller ID features do not function properly.
To single-line telephone jack (RJ11C)
To single-line telephone A jack (RJ11C)

Noise filter

Symbols used in these operating instructions
Symbol {} Button name/ soft key name Meaning The words in the brackets indicate button names/soft key names on the handset and base unit. Example: Unit keys: {C}, {OFF} Soft keys: {View CID}, {Phonebook} Proceed to the next operation. The words in quotations indicate the menu on the display. Press {V} or {^} to select Off.
Note: L When the battery needs to be charged, the handset beeps intermittently during use. Panasonic battery performance Operation While in use (talking) While not in use (standby) While using the clarity booster feature (page 18) Operating time Up to 5 hours Up to 11 days Up to 3 hours i Example: Alarm Example: {V}/{^}: Off
Note: L Battery operating time may be shortened over time depending on usage conditions and surrounding temperature.
TG607X.book Page 12 Tuesday, December 12, 2006 1:56 PM

Controls

Base unit

A BC D EF G H

Handset
K L M A B I J K L M N C D E F G H I

A B C D E F G H I J K L

N O B P Q

U T S R Q PO

A B C D E F G H I J K L M N O P Q R S T U
Speaker {MUTE} {FLASH} {CALL WAIT} {CONF} (Conference) {<} (REPEAT) {GREETING REC} (Recording) {GREETING CHECK} {ANSWER ON} ANSWER ON indicator VOLUME {>} {<} {MESSAGE} MESSAGE indicator {>} (SKIP) {ERASE} {STOP} {LOCATOR} {INTERCOM} IN USE indicator MIC (Microphone) {MEMO} {SP-PHONE} (Speakerphone) SP-PHONE indicator {HOLD} {PAUSE} {REDIAL} Charge contacts

M N O P Q R

J Speaker Soft keys Headset jack {C} (TALK) Navigator key ({^} {V} {<} {>}) {s} (SP-PHONE) {*} (TONE) {FLASH} {CALL WAIT} Microphone Charge contacts Lanyard/strap eyelet Charge indicator Ringer indicator Message indicator Receiver Display {MENU} {OFF} {PAUSE} {REDIAL} {HOLD} {INTERCOM}
TG607X.book Page 13 Tuesday, December 12, 2006 1:56 PM
Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<}, or {>}. Adjusting audio volume Press {^} or {V} repeatedly while talking.

3 {Erase} i {Yes} i {OFF}
PAUSE button (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 21). For example, if you need to dial the line access number 9 when making outside calls with a PBX:
2 Press {C} or {Call}. 3 When you finish talking, press {OFF}
or place the handset on the base unit or charger. Note: L Line in use is displayed when someone is talking on the unit or another phone. Using the speakerphone
1 Dial the phone number, and press
{s}. L Speak alternately with the other party.
1 {9} i {PAUSE} i Dial the

phone number.

Note: L A 3.5 second pause is inserted each time {PAUSE} is pressed. Press repeatedly to insert longer pauses.
2 When you finish talking, press
{OFF}. Note: L Use the speakerphone in a quiet environment. L To switch to the receiver, press {C}. Adjusting the receiver/speaker volume Press {^} or {V} repeatedly while talking. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).
TG607X.book Page 16 Tuesday, December 12, 2006 1:56 PM
Making/Answering Calls Using the base unit 1 {SP-PHONE} 2 Dial the phone number. 3 When the other party answers,
speak into the MIC. L Speak alternately with the other party.
Using the handset 1 Press {C} or {s}.
L You can also answer the call by pressing any dial key from {0} to {9}, {*}, {#}, or {INTERCOM}. (Any key talk feature)
{OFF}. Note: L You can change the ringer indicator color and the ringer tone (page 28). You can also adjust the handset ringer volume (page 28). Auto talk This feature allows you to answer a call by simply lifting the handset off the base unit or charger. You do not need to press {C}. To activate this feature, see page 27. Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing {OFF}.
4 When you finish talking, press

FLASH button

Pressing {FLASH} allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as Call Waiting. Note: L To change the flash time, see page 28.
TG607X.book Page 18 Tuesday, December 12, 2006 1:56 PM
Making/Answering Calls For Call Waiting service users
To use Call Waiting, you must subscribe to Call Waiting service of your telephone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a Call Waiting tone. Please contact your telephone service provider for details and availability of this service in your area. Press {CALL WAIT} to answer the 2nd call. L To switch between calls, press {CALL WAIT}. Note: L When this feature is turned on, BOOST flashes. L When this feature is turned off manually during a call, it does not turn on automatically during the same call. L While this feature is turned on; the battery operating time is shortened (page 11). the maximum number of extensions that can be used at a time may decrease.

Handset voice enhancer

This feature clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand (page 28).
Temporary tone dialing (for rotary/pulse service users)
You can temporarily switch the dialing mode to tone when you need to access touch tone services (for example, answering services, telephone banking services, etc.). Press {*} (TONE) before entering access numbers which require tone dialing.
1 Press {MENU} during an outside
2 {V}/{^}: Select V.E. on or V.E.
off. i {Select} Note: L When this feature is turned on, J is displayed. L Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off.

Handset clarity booster

An alarm will sound once for 3 minutes at the set time. Set the date and time beforehand (page 14).
1 {MENU} i {8} 2 {V}/{^}: Once i {Select}
L To turn off the alarm, select Off. i {Select} i {OFF}
3 Set the desired date and time. i {Save} 4 {V}/{^}: Select the desired ringer tone. i {Save}
L We recommend selecting a different ringer tone from outside call.
Note: L To stop the alarm, press any dial key or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode.

Customer support

The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer. {MENU} i {V}/{^}: Customer support i {Select} i {OFF}
TG607X.book Page 30 Tuesday, December 12, 2006 1:56 PM

Answering system

This unit contains an answering system which can answer and record calls for you when you are unavailable to answer the phone. Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been correctly set (page 14).
Turning the answering system on/off
Base unit Press {ANSWER ON} to turn on/off the answering system. L When the answering system is turned on, the ANSWER ON indicator lights. L When the answering system is turned off, the ANSWER ON indicator turns off.

Screening calls

While a caller is leaving a message, you can listen to the call through the base units speaker. To adjust the speaker volume, press {>} or {<} repeatedly. You can answer the call by pressing {SP-PHONE} on the base unit, or by pressing {C} on the handset. Turning off the call screening feature When the base unit is not in use, press {GREETING CHECK}, then press and hold {<} until the base unit beeps. OR While screening a call, press and hold {<} until the sound goes off. Note: L If you adjust the speaker volume while listening to messages or communicating through the base unit, the speaker volume for call screening is turned on again.

Memory capacity

The total recording capacity (including your greeting message and voice memo) is about 18 minutes. A maximum of 64 messages can be recorded. L If the message memory becomes full, the ANSWER ON indicator flashes rapidly (if the answering system is turned on). Erase unnecessary messages (page 31). L When the message memory becomes full, the greeting message is different depending on your situation: If you use the prerecorded greeting message, the unit automatically switches to another prerecorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded.
TG607X.book Page 31 Tuesday, December 12, 2006 1:56 PM

Greeting message

Base unit When the unit answers a call, callers are greeted by a greeting message. You can record your own greeting message or use a prerecorded greeting message.
Listening to messages using the base unit
When new messages have been recorded, the MESSAGE indicator on the base unit flashes. Press {MESSAGE}. L The base unit plays new messages. L When you have no new messages, the base unit plays back all messages.
Recording your greeting message
You can record your own greeting message (max. 2 minutes). If you do not record a greeting message, a prerecorded greeting message is used.
Operating the answering system
Key {>} or {<} {<} {>} {STOP} Operation Adjust the speaker volume Repeat message (during playback)*1 Skip message (during playback) Pause message To resume playback, press {MESSAGE}. To stop playback completely, press {STOP} again. Erase message currently playing
1 {GREETING REC} 2 Within 10 seconds, press

{GREETING REC} again.

3 After the base unit beeps, speak
clearly about 20 cm (8 inches) away from the MIC.
4 To stop recording, press {STOP}. Using a prerecorded greeting message
If you erase or do not record your own greeting message, the unit plays a prerecorded greeting message for callers and ask them to leave messages.

{ERASE}

Playing back the greeting message

Press {GREETING CHECK}.

*1 If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Press {ERASE} 2 times while the unit is not being used.
Erasing your greeting message
Press {GREETING CHECK}, and then press {ERASE} while your greeting message is playing.
TG607X.book Page 32 Tuesday, December 12, 2006 1:56 PM
Listening to messages using the handset
When new messages have been recorded: New message is displayed. The message indicator on the handset flashes slowly if the message alert feature is turned on (page 35).
You can also operate the answering system by pressing dial keys on the handset during playback. Key {^} or {V} {1} or {<} {2} or {>} {4} {5} {8} {9} {0} {*}{4} or {Erase} {*}{5} Operation Adjust the receiver/ speaker volume Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Turn answering system on Stop playback*2 Turn answering system off Erase message currently playing Erase all messages

1 {MENU} 2 {V}/{^}: Message play i
{Select} L The handset plays new messages including memo messages. L When you have no new messages, the handset plays back all messages.
3 When finished, press {OFF}.
Note: L To switch to the receiver, press {C}. Voice guidance If you do not press any buttons after the last message is played back, the handsets voice guidance starts. Operate the answering system by following the guidance as necessary. Calling back (Caller ID subscribers only) If Caller ID information was received for the call, you can call the caller back while listening to the message.
*1 If pressed within the first 5 seconds of a message, the previous message is played. *2 To resume operation, press a command key within 15 seconds, or the voice guidance will start.
1 Press {Select} during playback.
L To edit the number before calling back, press {Edit} repeatedly to select the desired format (page 23).

2 {Call}

TG607X.book Page 33 Tuesday, December 12, 2006 1:56 PM

Voice memo

Recording a voice memo
You can use the base unit to leave a voice memo (voice message) for yourself or someone else (max. 3 minutes). Voice memos can be played back later with the same operation used to play back answering system messages. Base unit
L The unit plays back new messages. L The voice guidance informs you of the available commands. The announcements are different depending on the voice guidance language settings (page 13).
3 Control the unit using remote

commands (page 34).

4 When finished, hang up. Voice guidance
When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order: Play back all messages Play back new messages Record a message Erase all messages Note: L If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. When the Spanish voice guidance is selected To start the voice guidance, press {9}. The voice guidance announces the available remote commands (page 34). See the Spanish Quick Guide for details. Note: L If you do not press any dial keys within 15 seconds after a voice guidance prompt, the unit disconnects your call.

1 {MEMO} 2 After the unit beeps, speak clearly
about 20 cm (8 inches) away from the MIC.
3 To stop recording, press {STOP}.

Remote operation

Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The units voice guidance prompts you to press certain dial keys to perform different operations. Important: L In order to operate the answering system remotely, you must first set a remote code (page 34). This code must be entered each time you operate the answering system remotely.
Using the answering system remotely 1 Dial your phone number from a touch

tone phone.

2 After the greeting message starts,
enter your remote code (page 34).
TG607X.book Page 34 Tuesday, December 12, 2006 1:56 PM
Answering System Remote commands
You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key {1} {2} {4} {5} {9} {0} {*}{4} {*}{5} Remote command Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off Erase message currently playing Erase all messages your remote code and begin remote operation (page 33).
Skipping the greeting message to leave a message
You can leave a message just as any outside caller can. Call your phone number. When the answering system picks up, press {*} to skip the greeting message and record your message after the beep.
Answering system settings

Remote code

A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 11. Handset
*1 If pressed within the first 5 seconds of a message, the previous message is played. *2 For English voice guidance only L To resume operation, enter a remote command within 15 seconds, or the voice guidance starts. *3 For Spanish voice guidance only
1 {MENU} i {0}{6}{3} 2 Enter the desired 2-digit remote

code. i {Save} i {OFF}

Ring count
You can change the number of times the phone rings before the unit answers calls. The default setting is 4. Toll saver: The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 33), you will know that there are no new messages when the phone rings for the

Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
1 Dial your phone number. 2 Let the phone ring 15 times.
L The unit answers your call with the greeting message. L You can hang up, or if you call from a touch tone phone, you can enter
TG607X.book Page 35 Tuesday, December 12, 2006 1:56 PM
3rd time. You can then hang up without being charged for the call. Handset

Callers recording time

You can change the maximum message recording time allotted to each caller. The default setting is 3min. Handset
1 {MENU} i {0}{6}{1} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF}
For Voice Mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, Call Waiting, Voice Mail, and unlimited local/ regional/long distance calls, please note the following: L To use the Voice Mail service provided by your telephone service provider rather than the units answering system, turn off the answering system (page 30). L To use this units answering system rather than the Voice Mail service provided by your telephone service provider, please contact your telephone service provider to deactivate your Voice Mail service. If your telephone service provider cannot do this: Set this units Ring count setting so that this units answering system answers calls before the Voice Mail service of your telephone service provider does. It is necessary to check the ring count required to activate the Voice Mail service provided by your telephone service provider before changing this setting. Change the ring count of the Voice Mail service so that the answering system can answer the call first. To do so, consult your telephone service provider.
1 {MENU} i {0}{6}{2} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF} Message alert
You can select whether or not the message indicator on the handset flashes slowly when new messages are recorded. The default setting is Off. Important: L If there are new Voice Mail messages present (page 36), the message indicator also flashes slowly. Handset
1 {MENU} i {0}{#} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF}
Note: L While message alert is on, battery operating time is shortened (page 11).
TG607X.book Page 36 Tuesday, December 12, 2006 1:56 PM

Example:

Using Voice Mail service
Voice Mail is an automatic answering service offered by your telephone service provider. After you subscribe to this service, the telephone service providers Voice Mail system will answer calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by the telephone service provider, not your telephone. Important: L To use the Voice Mail service provided by your telephone service provider rather than the units answering system, turn off the answering system (page 30).

TG607X.book Page 38 Tuesday, December 12, 2006 1:56 PM

Intercom

Intercom calls can be made: between handsets between the handset and base unit Note: L If you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call with the handset, press {OFF}, then press {C}. To answer the call with the base unit, press {SP-PHONE} 2 times. L You can locate a misplaced handset by paging it (handset locator). L When paging a unit for an intercom call, the paged unit beeps for 1 minute.
Answering an intercom call
1 Press {C} or {s} to answer the

{OFF}. Base unit

1 Press {SP-PHONE} or {LOCATOR/
INTERCOM} to answer the page.
{SP-PHONE}. Note for handset and base unit: L When the ringer volume is set to off, the handset or the base unit rings at a low level for intercom calls.

Making an intercom call

Transferring calls, conference calls
Outside calls can be transferred between the handset and base unit, or between 2 handsets. The handset and base unit, or 2 handsets can have a conference call with an outside party. Handset
1 {INTERCOM} 2 {V}/{^}: Select the desired unit. i
{Select} L To stop paging, press {OFF}.
3 When you finish talking, press
1 {LOCATOR/INTERCOM} 2 To page a specific handset, enter its
extension number ({1} {4}). To page all handsets, press {0} or wait for a few seconds. L To stop paging, press {LOCATOR/ INTERCOM}.
{INTERCOM} to put the call on hold.
2 {V}/{^}: Select the desired unit. i

{Transfer}

3 Wait for the paged party to answer.
L If the paged party does not answer, press {C} to return to the outside call.

{SP-PHONE}.

4 To complete the transfer:
Press {OFF}. L The outside call is being routed to the unit.
TG607X.book Page 39 Tuesday, December 12, 2006 1:56 PM
To establish a conference call: Press {Conf}. L To leave the conference, press {OFF}. The other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}. Base unit Note for handset and base unit: L After the paging party disconnects, you can talk to the outside caller.

1 Drive the screws (not included) into

the wall.

25.4 mm (1 inch) 83 mm (31/4 inches)

Screws (120 V AC, 60 Hz)

102 mm (4 inches)
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it is secure.
(120 V AC, 60 Hz) 83 mm (3 1/4 inches) 102 mm (4 inches)
TG607X.book Page 42 Tuesday, December 12, 2006 1:56 PM

Headset (optional)

Connecting a headset to the handset allows hands-free phone conversations. We recommend using the Panasonic headset noted on page 5.
L Headset shown is KX-TCA86. Switching a call between the headset and handset speakerphone To switch to the handset speakerphone, press {s}. To return to the headset, press {C}.

Lanyard/strap eyelet

If you have a lanyard/strap (not included), you can hang your handset from your neck or wrist. Thread it through the eyelet as shown and pull to tighten it.
TG607X.book Page 43 Tuesday, December 12, 2006 1:56 PM

Error messages

If the unit detects a problem, one of the following messages is shown on the display. Display message All handsets are registered. Cause/solution L 4 handsets have already been registered to the base unit. A previously deregistered handset number may still be retained in the base unit. To register an additional handset, erase the unnecessary handset number (page 39). L The called unit is in use. L The handset you tried to copy phonebook items to is in use. Try again later. L The handset you are calling is too far from the base unit. L The handsets registration has failed. Move the handset and base unit away from all electrical appliances and try again. L Another handset user tried to send phonebook items to you but there was an error. Have the other handset user re-send the items to you (page 21). L The destination handsets phonebook memory is full. Erase unnecessary items from the destination handsets phonebook (page 21). L There is no handset registered to the base unit matching the extension number you entered. L Your phonebook or redial list is empty. L The handset has lost communication with the base unit. Move closer to the base unit, and try again. L Confirm that the base units AC adaptor is plugged in. L The handsets registration may have been canceled. Re-register the handset (page 39). L There is no space to store new items in the phonebook. Erase unnecessary items (page 21). L A handset button was pressed while the handset was on the base unit or charger. Lift the handset and press the button again.

Memory capacity (message recording): 30 Message alert: 35, 37 Missed calls: 22 Mute: 17 N Navigator key: 13 P Pause: 15 Phonebook: 20 Phonebook copy: 21 Power failure: 9 Pulse service: 18 R Recording time: 35 Redial list: 15 Registration: 39 Remote code: 34 Remote operation: 33 Ring color: 28 Ring count: 34 Ringer ID: 23 Ringer off: 16, 28 Ringer tone: 28 Rotary service: 18 S Slow Talk: 18 Soft keys: 13 SP-phone: 15 T Talking Caller ID: 22 Time adjustment: 28 Toll saver: 34 Tone: 14, 18 Transferring calls: 38 Troubleshooting: 44 TTY: 5, 52 V VE (Voice Enhancer): 18 VM (Voice Mail): 36 Voice guidance: 32, 33 Voice guidance language: 13 Voice Mail access number: 36 Volume Base unit ringer: 16 Base unit speaker: 16 Handset ringer: 28 Receiver: 15 Speaker: 15 W Wall mounting: 40, 41 Warranty: 53
TG607X.book Page 56 Tuesday, December 12, 2006 1:56 PM
If you need assistance with setup or operation
1 Visit our website: http://www.panasonic.com/help 2 Contact us via the web at: http://www.panasonic.com/contactinfo 3 Call us at: 1-800-211-PANA (1-800-211-7262)
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
When you ship the product
L Carefully pack your unit, preferably in the original carton. L Attach a letter, detailing the symptom, to the outside of the carton. L Send the unit to Panasonic Service and Technology Company Customer Service Center, prepaid and adequately insured. L Do not send your unit to Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.
We recommend keeping a record of the following information for future reference. Serial No. (found on the bottom of the base unit) Name and address of dealer Date of purchase
Attach your purchase receipt here.
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc. San Gabriel Industrial Park, Ave. 65 de Infantera, Km. 9.5, Carolina, Puerto Rico 00985 Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. 2007 Panasonic Communications Co., Ltd. All Rights Reserved.

doc1

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 70AAAx3 Model no for telephone Panasonic KX-TGA230 TGA271 TGA272 TG2352 TG2382 Panasonic KX-FPG378 TG2302 TG2318 TG2336 TG2357 TG2880 TG5213 TG5425 TG5438 TG5480 TG5822 TG6500 TG5653

HHR-P103A

Capacity

700mAh

Ni-MH : 90AAAx3 Capacity 830mAh

HHR-P104A

FPG379 TG2303 TG2319 TG2343 TG2386 TG5050 TG5230 TG5426 TG5439 TG5543 TG5831 TG6502 TGA520
FPF 391 TG2308 TG2322 TG2344 TG2388 TG5055 TG5240 TG5428 TG5451 TG5561 TG5832 TG5631 TGA523
TG2312 TG2313 TG2314 TG2316 TG2323 TG2326 TG2328 TG2335 TG2346 TG2348 TG2355 TG2356 TG2396 TG2480 TG2488 TG2489 TG5200 TG5202 TG5210 TG5212 TG5243 TG5421 TG5422 TG5423 TG5431 TG5432 TG5433 TG5436 TG5452 TG5453 TG5456 TG5471 TG5566 TG5571 TG5576 TG5821 TG5838 TG5839 TG5861 TG5871 TG5632 TG5634 TG5651 TG5652 TGA550 TGA551 TGA552 TGA650
Ni-MH : 90AAAx2 Capacity 830mAh

HHR-P105A

Panasonic KX-TG2411 TG2420 TG2421 TG2422 TG2423 TG2424 TG2431 TG2432 TG2433 TG2434 TG2620 TG2621 TG2622 TG2623 TG2624 TG2628 TG2629 TG2631 TG2632 TG2633 TG2634 TG2638 TG2810 TG2811 TG2815 TG2820 TG2822 TG2825 TG2826 TG2831 TG2832 TG2835 TG2836 TG2853 TG2854 TG2873 TG2910 TG2920 TG2922 TG2931 TG2932 TG2935 TG2936 TG5621 TG5631 TG5632 TG5652 TG5672 TG5761 TG5762 TG5766 TG5767 TG5771 TG5776 TG5778 TG5779 TG6700 TG6702 TGA570 TGA571 TGA572 TGA670
Ni-MH : 65AAAx3 Capacity 650mAh
Panasonic KX-TG3021 TG3022 TG3031 TG3032 TG3033 TG3034 TG3510 TG3511 TG3520 TG3521 TG3522 TG3526 TG3531 TG3532 TG3533 TG3536 TG6021 TG6022 TG6023 TG6025 TG6026 TG6031 TG6032 TG6033 TG6034 TG6051 TG6052 TG6053 TG6054 TG6071 TG6072 TG6073 TG6074 TG6075 TGA300 TGA301 TGA351 TGA600 TGA601 KX-GT GT1500 GT1540 GTA150 - IP Phone

HHR-P107A

Ni-MH : 35AAX3 Capacity 350mAh

HHR-P301A

Panasonic KX-T3610 T3620 T3640 T3702 T3705 T3710 T3712 T3720 T3725 T3730 T3732 T3800 T3805 T3807 T3822 T3823 T3824 T3825 T3832 T3848 T3850 T3855 T3860 T3870 T3875 T3908 T3910 T3912 T3920 T3925 T3930 T3932 T3935 T3940 T3945 T3950 T3960 T3962 T3965 T3967 T3968 T3980 T4108 T4109 T4168 T4169 T4200 T4300 T4310 T4330 T4340 T4342 T4350 T4360 T4365 T4370 T4400 T4410 T4500 T4550 T4600 TC100 TC109 TC150 TC155 TC157 TC160 TC162 TC162B TC163 TC165 TC170 TC180 TC183 TC185 TC187 TC190 TC197 TC280 TC282 TC289 TC906 TCC106 TCC116 TCC425 TCM410 TCM410-M TCM412 TCM412-B TCM415 TCM417 TCM418 TCM420 TCM422 TCM424 TCM440 TCM440-B
To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 35AAX3 Capacity 350mAh Model no for telephone

HHR-P302A

Fits Cobra, GE, V-Tech, Nortwestern Bell, AT&T Southwestern Bell and SANYO CordlessPhone
Ni-MH : 35AAX3 Capacity 350mAh Fits AT&T, GE, Sears, Sony, Pacific Bell Bell South, Pac.Tel and Mognavox CordlessPhone

HHR-P303A

Ni-MH : 35AAX2 Capacity 350mAh Panasonic KX-TC1000 TC1000B TC1001 TC1001W TC1002
TC1005 TC1010 TC1040 TC1040W

HHR-P305A

Ni-MH : 120AAX3 Capacity 1150mAh
Panasonic KX-TG2396 TG2397 TG2400 TG2400B TG2405 TG2500 TG2505 TG2550 TG2560 TG2565 TG2570 TG2575

HHR-P401A

Ni-MH : 100AAX3 Capacity 1000mAh
Panasonic KX-TG2205 TG2207 TG2215 TG2217 TG2219 TG2227 TG2236 TG2237 TG2239 TG2247 TG2257 TG2267 TG2700 TG2720 TG2730 TG2740 TG2750 TG2770 TG2970 TG2970B TG5100 TG5110 TGA270 TGA273 TGA290 TGA290B TGA510

HHR-P402A

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 70AAX3 Model no for telephone Panasonic KX-TA38 FPC161 FPC165 FPC166 T800 T3800 T3815 T3821 T3830 T3831 T3835 T3842 T3845 T3880 T3900 TC901 TC904 TC907 TC907B TC911 TC917 TC917HSB TC933 TC933B TC934 TC934B TC935 TC935B TC955RUB TC956RUB TC976RUB TC1400 TC1401 TC1401B TC1403 TC1404 TC1405 TC1408 TC1410 TC1410B TC1413 TC1430 TC1430W TC1431 TC1431W TC1447 TC1447PK TC1450 TC1451B TC1451 TC1457 TC1460 TC1460B TC1460W TC1461 TC1461B TC1481 TC1481B TC1484 TC1493 TC1493CB TC1493CW TC1500 TC1501 TC1501B TC1520 TC1520B TC1503 TC1507 TC1696 TC1700 TC1701 TC1701B TC1703 TC1710 TC1710B TC1711 TC1711B TC1713 TC1720 TC1720B TC1721 TC1721B TC1722 TC1723 TC1731 TC1731B TC1733 TC1733CB TC1740 TC1740B TC1741 TC1741B TC1742 TC1743 TC1750 TC1750B TC1800 TC1800B TC1850 TC1850B TC1867 TC1870 TC1870B TC1890 TC1890B TC9568XB TCM939 TCM939B TCM941 TCM943 TCM944 TCM944B TCM947 TCM947B TCL100B Fits IBM, NorthwesternBell, SONY and Uniden Cordless Phone

HHR-P501A

Ni-MH : 150AAX3

HHR-P505A

1500mAh
P-P510A -> Replaced by HHR-P505A
Panasonic KX-TG200 TG200ALB TG200CB TG210 TG210ALB TGM240 TGM240B TC1801 TC1802 TC1805 TC1808 TC1811 TC1812 TC1831 TC1832 TC1851 TC1852 TC1855 TC1858 TC1861 TC1862 TC1863 TC1865 TC1866 TC1867 TC1868 TC1871 TC1872 TC1881 TC1882 TC1886 TC1887 TC1891 TC1892 TG2401 TG2403 TG2451 TG2481 TG2501 TG2502 TG2503 TG2506 TG2551 TG2552 TG2553 TG2559 TG2562 TG2563 TG2564 TG2581 TG2583 TG2584 TG2586 TG2593 TC1801 TC1811B TC1831B TC1851B TC1861B TC1866B TC1871B TC1886B TC1891B
2007.1- REPLACED Ni-MH : 150AAX2 Capacity 1500mAh Panasonic KX-TG2000 TG2000B TG4000 TG4000B TGA200 TGA400 TGA420

HHR-P506A

NI-cd Capacity 500mAh
Panasonic KX-TG2000 2000B TG4000 4000B

P-P507A

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 150AAX2 Capacity 1500mAh Model no for telephone Panasonic KX-TG2650 TG2670 TG2680 TG2650N TG2670N YG2680N TG2690N

HHR-P509A

Ni-MH : 160AAX2 Capacity 1500mAh
Panasonic KX-TG2208 TG2214 TG2216 TG2224 TG2226 TG2235 TG2238 TG2248 TG2258

HHR-P513A

Ni-MH : 70AAX3 Capacity 700Ah
Panasonic KX-T9500 T9505 T9509 T9520 T9550 TC905 TC930

HHR-P543A

No Data
Ni-MH : 150AAX2 Capacity 1500Ah Panasonic KX-TG1000 TG1050 TGA100 TGA100 TGA420B V Tech VT2431 VT2461 AT&T 2455

HHR-P546A

Ni-MH : 70AAX3 Capacity 700mAh
Panasonic KX-TC900 TC900B TC900W TC909 TC910 TC910B TC910DB TC914 TC919 TCC902 TCC912 TCC936 TCC942 TCM937 TCM938 TCM940 TCS970

HHR-P592A

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 150AAX3 Capacity 1500mAh Panasonic Model no for telephone

HHR-P515A

KX-THA16
Ni-MH : 110AAX5 Capacity 1000mAh Panasonic

HHR-P516A

KX-TG4500
Ni-MH : 70AAX1 Capacity 700mAh Panasonic KX-TGA101/1034/1033/1032 No Photo

HHR-4DPA

 

Tags

Notebook LE37S61B Workstation DCR-HC42 CDX-GT430U NN-GD458W SL-SV550 TH-42PZ85B MP480 CDX-CA690X Polaroid I830 JBL L101 Urc-6011 Siemens CT65 E1005 940 CS DSC-S700 Volvo V50 Lowrance 3500 VP-DC175WB AV121 HT-X30 Coupe 2003 NV-GS17EG CM200USB Omniswitch CLI DXZ938R Chocolat Digitech 2120 MS12AH DCR-TRV340 PSC 950 VR3000-VR5000 240V DEH-2950MP YZF-R6-2005 GCE-8400B GT Line Wacs7500 QHC7505 30O KDC-W4034 Storage Software CQ-VX2200 EFE 503 Modems Freehand MX Bp PRO 39 Plus Kurzweil SP2 SPV C600 KX-TG2620W Junior 700 TL-WN510G Photosmart 245 Roland E-86 VSA-AX10i-S MFC-5100C Monterrey MP35 ICF-C795RC Dead III 2410-304 System MHZ15 Leica Iiia 880 MHC-EC99I P4330 SRS-BT100 BV9975B CB 2002 Enduro DSP-AX520 CPM-120 KM630 DSC-T100 CD3000XL 1-1-0 SD600 Urc-8910 SGH-Z540V LTV-19W6 Workshop 7 PD323 KX-TS2365RUW KLV-32S400A Bikes Bike NR-200 PDP4211 Incd 4 1642-VLZ3 C-180 YO-480 QC-10 Dimage G400 DVT-7300 Glide Review 50 4T 400 4 WM-FX521

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101