TG607X.book Page 5 Tuesday, December 12, 2006 1:56 PM
Introduction Additional/replacement accessories
Accessory item Rechargeable nickel metal hydride (Ni-MH) battery Accessory handset with charger Headset Order number HHR-P107 KX-TGA600 KX-TCA60, KX-TCA86, KX-TCA88HA, KX-TCA92, KX-TCA93, KX-TCA94, or KX-TCA95 KX-J66

T-adaptor

Expanding your phone system
You can expand the phone system by registering optional handsets to a single base unit. L A maximum of 4 total handsets (included and optional) can be registered to a single base unit. L KX-TG6074: An additional handset cannot be registered. Handset (optional): KX-TGA600
Sales and support information
L To order additional/replacement accessories, call 1-800-332-5368. L TTY users (hearing or speech impaired users) can call 1-866-605-1277.
TG607X.book Page 6 Tuesday, December 12, 2006 1:56 PM
Important safety instructions
When using the product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read all instructions carefully. 2. Follow all warnings and instructions marked on the product. 3. Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. Use a moist cloth for cleaning. 4. Do not use the product near water, for example near a bathtub, wash bowl, kitchen sink, etc. 5. Place the product securely on a stable surface. Serious damage and/or injury may result if the product falls. 6. Do not cover slots and openings on the product. They are provided for ventilation and protection against overheating. Never place the product near radiators, or in a place where proper ventilation is not provided. 7. Use only the power source marked on the product. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. 8. Do not place objects on the power cord. Install the product where no one can step or trip on the cord. 9. Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. 10. Never push any objects through slots in the product. This may result in the risk of fire or electric shock. Never spill any liquid on the product.
11. To reduce the risk of electric shock, do not disassemble the product. Take the product to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the product is subsequently used. 12. Unplug the product from power outlets and take to an authorized service center when the following conditions occur: A. When the power cord is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not work normally by following the operating instructions. Adjust only controls covered by the operating instructions. Improper adjustment may require extensive work by an authorized service center. E. If the product has been dropped or physically damaged. F. If the product exhibits a distinct change in performance. 13. During thunderstorms, avoid using telephones except cordless types. There may be a remote risk of an electric shock from lightning. 14. Do not use the product to report a gas leak, when in the vicinity of the leak.

Copying an item 1 {MENU} i {#}{1} 2 {V}/{^}: Select the handset to copy

to. i {Next}

3 {V}/{^}: Select the desired item. i

{Send}

4 Press {OFF} after the long beep. Copying all items 1 {MENU} i {#}{2} 2 {V}/{^}: Select the handset to copy

to. i {Send}

1 During an outside call, press

{MENU}.

3 Press {OFF} after the long beep.
2 {V}/{^}: Phonebook i {Select} 3 Find the desired item (page 20). i
{Call} Note: L When storing a calling card access number and your PIN in the phonebook as one phonebook item, press {PAUSE} to add pauses after the number and PIN as necessary (page 15). L If you have rotary/pulse service, you need to press {*} before pressing
TG607X.book Page 22 Tuesday, December 12, 2006 1:56 PM

Using Caller ID service

This unit is Caller ID compatible. To use Caller ID features, you must subscribe to Caller ID service of your telephone service provider. Caller ID features When an outside call is being received, the calling partys name and phone number are displayed. Caller information for the last 50 callers is logged in the caller list by the most recent call to the oldest. L Generally caller information is displayed from the 2nd ring. L If the unit cannot receive caller information, the following is displayed: Out of area: The caller dialed from an area which does not provide Caller ID service. Private caller: The caller requested not to send caller information. Long distance: The caller called you long distance. L If the unit is connected to a PBX system, caller information may not be received properly. Consult your PBX supplier. Missed calls If a call is not answered, the unit treats the call as a missed call. You can view the number of missed calls by pressing {View CID}. Custom name display When the Caller ID number is received and it matches a phone number stored in the phonebook, the stored name from the phonebook is displayed and logged in the caller list.
Call Waiting Caller ID display If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed after you hear a Call Waiting tone (page 18). Please contact your telephone service provider for details and availability of this service in your area.

Talking Caller ID

This feature lets you know who is calling without looking at the display. When a call comes in, the handset and base unit announce the callers name or phone number displayed on the handset following every ring. To use this feature, you must subscribe to Caller ID service of your telephone service provider. The unit announces in English only. L If the callers phone number is stored in the phonebook of the handset 1 (extension No. 1), all handsets and the base unit announce the name stored in handset 1 phonebook. If handset 1 does not have a link to the base unit (battery is empty, for instance), remaining handsets and the base unit announce the Caller ID name or number received from the telephone service provider. L Name pronunciation may vary. This feature may not pronounce all names correctly. L Caller ID supports names of up to 15 letters. If the callers name has more than 15 letters, the name is not displayed or announced correctly. L Usually the unit announces the callers name after the 2nd ring. If you turn on the answering system and set the ring count to 2 (page 34), the unit does not announce the callers name. If Toll saver is selected
TG607X.book Page 23 Tuesday, December 12, 2006 1:56 PM
and there is a new message, the unit does not announce the callers name. L When you receive a call while on the phone, the 2nd callers name is not announced even if you subscribe to both Caller ID and Call Waiting with Caller ID services. L The announcement is heard at the ringer volume (page 16, 28). L This feature can be turned on or off (page 28).

Caller list

Viewing the caller list and calling back 1 {View CID} 2 Press {V} to search from the most
recent call, or {^} to search from the oldest call.
3 To call back, press {C}. Ringer ID/Light-up ID
This feature can help you identify who is calling by using different ringers and ringer indicator colors for different callers stored in the phonebook. You can assign a different ringer and indicator color to each phonebook item. When a call is received from a caller stored in the phonebook, the assigned ringer rings and the assigned ringer indicator color flashes after Caller ID information is displayed. If you select No Ringer ID (default) or No Light-up ID (default), the handset uses the ringer tone or ringer indicator color you selected on page 28 when a call is received from that caller. To exit, press {OFF}. Note: L Each handset has its own caller list. The number of missed calls may differ between handsets. Even if you viewed the caller list or answered a call on one handset, the same information is still recognized as a missed call in the other handsets. L A Q is displayed in caller information which has already been viewed or answered.

Editing a callers phone number before calling back
You can edit a phone number in the caller list by removing its area code and/ or the long distance code 1.
1 Find the desired item (page 20). i

{Option}

2 To assign a ringer:
{V}/{^}: Select Ringer ID. i {Select} To assign a ringer indicator color: {V}/{^}: Select Light-up ID. i {Select}
1 {View CID} 2 {V}/{^}: Select the desired item. i

{Select}

3 Press {Edit} repeatedly until the
phone number is shown in the desired format. 1 Local phone number Example:
3 {V}/{^}: Select the desired setting. 4 {Save} i {OFF}

321-5555

2 Area code Local phone number Example:

555-321-5555

TG607X.book Page 24 Tuesday, December 12, 2006 1:56 PM
Area code Local phone number Example: reprogram the area codes you want to edit once again.

1-555-321-5555

4 {C} Caller ID number auto edit feature
Once you call back an edited number, the unit will remember the Area Code and Format of the Edited Number. Next time when someone calls from the same Area Code, caller information will be customized by the unit as follows: When the call is being received, the Caller ID number will be displayed in the same Format as the Edited Number. After the call is ended, the phone number of the caller, when reviewed from the Caller list, will be displayed in the same Format as the Edited Number. For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be turned on or off (page 27). Note: L Phone numbers from the 4 most recently edited area codes are automatically edited. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and
Storing caller information into the phonebook 1 {View CID} 2 {V}/{^}: Select the desired item. i
{Select} L To edit the number, press {Edit} repeatedly until the phone number is shown in the desired format.

3 {Save}

L If there is name information for the caller, skip to step 5.
4 Enter the name (see the character
table, page 20). i {Next} i {Save}
5 {OFF} Erasing selected caller information 1 {View CID} 2 {V}/{^}: Select the desired item. 3 {Erase} i {Yes} i {OFF}
Erasing all caller information
1 {View CID} 2 {All erase} i {Yes}
TG607X.book Page 25 Tuesday, December 12, 2006 1:56 PM

Programmable settings

You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods: scrolling through the display menus (page 25) using the direct commands (page 27) L Mainly the direct command method is used in these operating instructions.

{1}: <English> {2}: Espaol {1}: <On> {0}: Off {1}{6}: Level 16 <3> {1}: On {0}: <Off> {1}: 1min {2}: 2min {3}: <3min> Default: 11

r r r

35, 35 34
TG607X.book Page 28 Tuesday, December 12, 2006 1:56 PM
Feature Ring color (Ringer indicator color) Ring count Ringer tone (Base unit) Ringer tone*4 (Handset) Ringer volume (Handset) Set dial mode Set flash time*5 Feature code {1}{4} Setting code {1}: <Color1>=Amber {2}: Color2=Green {3}: Color3=Red {4}: Multicolor {2}{7}: 27 rings <4> {0}: Toll saver {1}{3}: Tone <1>3 {1}{3}: Tone <1>3 {4}{7}: Melody 14 {1}: Low {2}: Medium {3}: <High> {0}: Off {1}: Pulse {2}: <Tone> {1}: <700ms> {2}: 600ms {3}: 400ms {4}: 300ms {5}: 250ms {6}: 110ms {7}: 100ms {8}: 90ms {1}: A {2}: <B> {1}: <On> {0}: Off System setting*1 Page
{0}{6}{1} {0}{*}{1} {1}{2} {1}{1} {0}{5}{1} {0}{5}{2}

r r r r

34 14 17
Set line mode*6 Store VM access# Talking CallerID (Handset) Talking CallerID (Base unit) Time adjustment*7 (Caller ID subscribers only) V.M. access VM tone detect Voice enhancer Voice prompt (Change language)

{0}{5}{3} {0}{7}{1} {9}

36 22

{0}{*}{4}

{1}: <On> {0}: Off

{4}{2}

{1}: <Caller ID[auto]> {0}: Manual
{3} {0}{7}{2} {5} {0}{8}{2}
{1}: <On> {0}: Off {1}: On {0}: <Off> {1}: <English> {2}: Espaol
TG607X.book Page 29 Tuesday, December 12, 2006 1:56 PM
*1 If System setting column is checked, you do not need to program the same item using another handset. *2 If you subscribe to Caller ID service and want to view the callers information after lifting up the handset to answer a call, turn off this feature. *3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones. *4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *5 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at 700ms unless pressing {FLASH} fails to pick up the call waiting call. *6 Generally, the line mode setting should not be adjusted. If Line in use is not displayed or the IN USE indicator on the base unit does not light properly when another phone connected to the same line is in use, you need to change the line mode to A. *7 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
An alarm will sound once for 3 minutes at the set time. Set the date and time beforehand (page 14).
1 {MENU} i {8} 2 {V}/{^}: Once i {Select}
L To turn off the alarm, select Off. i {Select} i {OFF}

3 Set the desired date and time. i {Save} 4 {V}/{^}: Select the desired ringer tone. i {Save}
L We recommend selecting a different ringer tone from outside call.
Note: L To stop the alarm, press any dial key or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode.

Customer support

The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer. {MENU} i {V}/{^}: Customer support i {Select} i {OFF}
TG607X.book Page 30 Tuesday, December 12, 2006 1:56 PM

Answering system

This unit contains an answering system which can answer and record calls for you when you are unavailable to answer the phone. Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been correctly set (page 14).
Turning the answering system on/off
Base unit Press {ANSWER ON} to turn on/off the answering system. L When the answering system is turned on, the ANSWER ON indicator lights. L When the answering system is turned off, the ANSWER ON indicator turns off.

Screening calls

While a caller is leaving a message, you can listen to the call through the base units speaker. To adjust the speaker volume, press {>} or {<} repeatedly. You can answer the call by pressing {SP-PHONE} on the base unit, or by pressing {C} on the handset. Turning off the call screening feature When the base unit is not in use, press {GREETING CHECK}, then press and hold {<} until the base unit beeps. OR While screening a call, press and hold {<} until the sound goes off. Note: L If you adjust the speaker volume while listening to messages or communicating through the base unit, the speaker volume for call screening is turned on again.

Memory capacity

The total recording capacity (including your greeting message and voice memo) is about 18 minutes. A maximum of 64 messages can be recorded. L If the message memory becomes full, the ANSWER ON indicator flashes rapidly (if the answering system is turned on). Erase unnecessary messages (page 31). L When the message memory becomes full, the greeting message is different depending on your situation: If you use the prerecorded greeting message, the unit automatically switches to another prerecorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded.
TG607X.book Page 31 Tuesday, December 12, 2006 1:56 PM

Greeting message

Base unit When the unit answers a call, callers are greeted by a greeting message. You can record your own greeting message or use a prerecorded greeting message.

1 Press {Select} during playback.
L To edit the number before calling back, press {Edit} repeatedly to select the desired format (page 23).

2 {Call}

TG607X.book Page 33 Tuesday, December 12, 2006 1:56 PM

Voice memo

Recording a voice memo
You can use the base unit to leave a voice memo (voice message) for yourself or someone else (max. 3 minutes). Voice memos can be played back later with the same operation used to play back answering system messages. Base unit
L The unit plays back new messages. L The voice guidance informs you of the available commands. The announcements are different depending on the voice guidance language settings (page 13).
3 Control the unit using remote

commands (page 34).

4 When finished, hang up. Voice guidance
When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order: Play back all messages Play back new messages Record a message Erase all messages Note: L If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. When the Spanish voice guidance is selected To start the voice guidance, press {9}. The voice guidance announces the available remote commands (page 34). See the Spanish Quick Guide for details. Note: L If you do not press any dial keys within 15 seconds after a voice guidance prompt, the unit disconnects your call.
1 {MEMO} 2 After the unit beeps, speak clearly
about 20 cm (8 inches) away from the MIC.
3 To stop recording, press {STOP}.

Remote operation

Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The units voice guidance prompts you to press certain dial keys to perform different operations. Important: L In order to operate the answering system remotely, you must first set a remote code (page 34). This code must be entered each time you operate the answering system remotely.
Using the answering system remotely 1 Dial your phone number from a touch

tone phone.

2 After the greeting message starts,
enter your remote code (page 34).
TG607X.book Page 34 Tuesday, December 12, 2006 1:56 PM
Answering System Remote commands
You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key {1} {2} {4} {5} {9} {0} {*}{4} {*}{5} Remote command Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off Erase message currently playing Erase all messages your remote code and begin remote operation (page 33).

Skipping the greeting message to leave a message
You can leave a message just as any outside caller can. Call your phone number. When the answering system picks up, press {*} to skip the greeting message and record your message after the beep.
Answering system settings

Remote code

A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 11. Handset
*1 If pressed within the first 5 seconds of a message, the previous message is played. *2 For English voice guidance only L To resume operation, enter a remote command within 15 seconds, or the voice guidance starts. *3 For Spanish voice guidance only
1 {MENU} i {0}{6}{3} 2 Enter the desired 2-digit remote

code. i {Save} i {OFF}

Ring count
You can change the number of times the phone rings before the unit answers calls. The default setting is 4. Toll saver: The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 33), you will know that there are no new messages when the phone rings for the
Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
1 Dial your phone number. 2 Let the phone ring 15 times.
L The unit answers your call with the greeting message. L You can hang up, or if you call from a touch tone phone, you can enter
TG607X.book Page 35 Tuesday, December 12, 2006 1:56 PM
3rd time. You can then hang up without being charged for the call. Handset

Callers recording time

You can change the maximum message recording time allotted to each caller. The default setting is 3min. Handset
1 {MENU} i {0}{6}{1} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF}
For Voice Mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, Call Waiting, Voice Mail, and unlimited local/ regional/long distance calls, please note the following: L To use the Voice Mail service provided by your telephone service provider rather than the units answering system, turn off the answering system (page 30). L To use this units answering system rather than the Voice Mail service provided by your telephone service provider, please contact your telephone service provider to deactivate your Voice Mail service. If your telephone service provider cannot do this: Set this units Ring count setting so that this units answering system answers calls before the Voice Mail service of your telephone service provider does. It is necessary to check the ring count required to activate the Voice Mail service provided by your telephone service provider before changing this setting. Change the ring count of the Voice Mail service so that the answering system can answer the call first. To do so, consult your telephone service provider.

1 {MENU} i {0}{6}{2} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF} Message alert
You can select whether or not the message indicator on the handset flashes slowly when new messages are recorded. The default setting is Off. Important: L If there are new Voice Mail messages present (page 36), the message indicator also flashes slowly. Handset
1 {MENU} i {0}{#} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF}
Note: L While message alert is on, battery operating time is shortened (page 11).
TG607X.book Page 36 Tuesday, December 12, 2006 1:56 PM

Example:

Using Voice Mail service
Voice Mail is an automatic answering service offered by your telephone service provider. After you subscribe to this service, the telephone service providers Voice Mail system will answer calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by the telephone service provider, not your telephone. Important: L To use the Voice Mail service provided by your telephone service provider rather than the units answering system, turn off the answering system (page 30).
1-222-333-4444 VM access number

Pauses Password

To erase the Voice Mail access number Repeat step 1, then press and hold {Clear} until all digits are erased. Press {Save}, then press {OFF}.
Voice Mail (VM) tone detection
Your telephone service provider sends special signals (sometimes called Voice Mail tones or stutter tones) to the unit to let you know you have new Voice Mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press {C} or {SP-PHONE}, you have new Voice Mail messages. Minutes after you hang up a call or after the phone stops ringing, your unit will check the phone line to see if new Voice Mail messages have been recorded. Turn this feature off when: You do not subscribe to Voice Mail service. Your telephone service provider does not send Voice Mail tones. Your phone is connected to a PBX. If you are not sure which setting is required, consult your telephone service provider. Turning VM tone detection on/off The default setting is On. Handset

Storing the Voice Mail (VM) access number
In order to listen to your Voice Mail messages, you must dial your telephone service providers Voice Mail access number. Once you have stored your Voice Mail access number, you can dial it automatically (page 37). Handset
1 {MENU} i {0}{7}{1} 2 Enter your access number (max. 32
digits). i {Save} i {OFF} Note: L When storing your Voice Mail access number and your mailbox password, press {PAUSE} to add pauses (page 15) between the access number and the password as necessary. Consult your telephone service provider for the required pause time.
1 {MENU} i {0}{7}{2} 2 {V}/{^}: Select the desired setting. 3 {Save} i {OFF}
TG607X.book Page 37 Tuesday, December 12, 2006 1:56 PM
Voice Mail Service Listening to Voice Mail messages
The unit lets you know that you have new Voice Mail messages in the following ways: New Voice Mail is displayed on the handset. The message indicator on the handset flashes slowly if message alert feature is turned on (page 37). Handset

Message alert

You can select whether or not the message indicator on the handset flashes slowly when there are new recorded messages in the Voice Mail system. The default setting is Off. Important: L If there are new answering system messages present (page 30), the message indicator also flashes slowly. Handset
1 Press {C}, then press {VM} within
15 seconds. OR {MENU} i{V}/{^}: V.M. access i {Select} L The speakerphone turns on.
2 Follow the prerecorded instructions. 3 When finished, press {OFF}.
Note: L If {VM} is not displayed, the Voice Mail access number has not been stored. Store the number (page 36). L If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {OFF} until the handset beeps. L If your Voice Mail service uses Voice Mail tones and the message is over 3 minutes long, the handset may not indicate new messages. L If your Voice Mail service uses Voice Mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually.
TG607X.book Page 38 Tuesday, December 12, 2006 1:56 PM

Intercom

Intercom calls can be made: between handsets between the handset and base unit Note: L If you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call with the handset, press {OFF}, then press {C}. To answer the call with the base unit, press {SP-PHONE} 2 times. L You can locate a misplaced handset by paging it (handset locator). L When paging a unit for an intercom call, the paged unit beeps for 1 minute.

Answering an intercom call
1 Press {C} or {s} to answer the

{OFF}. Base unit

1 Press {SP-PHONE} or {LOCATOR/
INTERCOM} to answer the page.
{SP-PHONE}. Note for handset and base unit: L When the ringer volume is set to off, the handset or the base unit rings at a low level for intercom calls.

Making an intercom call

Transferring calls, conference calls
Outside calls can be transferred between the handset and base unit, or between 2 handsets. The handset and base unit, or 2 handsets can have a conference call with an outside party. Handset
1 {INTERCOM} 2 {V}/{^}: Select the desired unit. i
{Select} L To stop paging, press {OFF}.
3 When you finish talking, press
1 {LOCATOR/INTERCOM} 2 To page a specific handset, enter its
extension number ({1} {4}). To page all handsets, press {0} or wait for a few seconds. L To stop paging, press {LOCATOR/ INTERCOM}.
{INTERCOM} to put the call on hold.
2 {V}/{^}: Select the desired unit. i

{Transfer}

3 Wait for the paged party to answer.
L If the paged party does not answer, press {C} to return to the outside call.

{SP-PHONE}.

4 To complete the transfer:
Press {OFF}. L The outside call is being routed to the unit.
TG607X.book Page 39 Tuesday, December 12, 2006 1:56 PM
To establish a conference call: Press {Conf}. L To leave the conference, press {OFF}. The other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}. Base unit Note for handset and base unit: L After the paging party disconnects, you can talk to the outside caller.

Registering a handset

The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.
{LOCATOR/INTERCOM} to put the call on hold.

1 Handset:

{MENU} i {0}{0}{1}
2 To page a specific handset, enter its
extension number ({1} {4}). To page all handsets, press {0} or wait for a few seconds.

2 Base unit:

Press and hold {LOCATOR/ INTERCOM} until the IN USE indicator flashes. L After the IN USE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
L If the paged party does not answer, press {LOCATOR/INTERCOM} to return to the outside call.
Press {SP-PHONE}. L The outside call is being routed to the handset. To establish a conference call: Press {CONF}. L To leave the conference, press {SP-PHONE}. The other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}. Answering transferred calls Handset Press {C} to answer the page. Base unit Press {SP-PHONE} to answer the page.

3 Handset:

Press {OK}, then wait until a beep sounds.

Making/answering calls, intercom Problem Static is heard, sound cuts in and out. Interference from other electrical units. Cause/solution L Move the handset and base unit away from other electrical appliances. L Move closer to the base unit. L Turn on the clarity booster feature (page 18). L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The ringer volume is turned off. Adjust it (page 16, 28). L The dialing mode may be set incorrectly. Change the setting (page 14). L The base unit or another handset is in use. Try again later. L Make sure that an optional headset is connected properly (page 42). L If SP-phone is displayed on the handset, press {C} to switch to the headset.
The handset and base unit do not ring. I cannot make a call.
I cannot have a conversation using the headset.
TG607X.book Page 46 Tuesday, December 12, 2006 1:56 PM
Problem I cannot make long distance calls. I cannot page the handset or base unit. The Slow Talk feature does not work. Caller ID Problem The handset does not display the callers name and/or phone number. Cause/solution L You have not subscribed to Caller ID service. Contact your telephone service provider to subscribe. L If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, disconnect the unit from the equipment and plug the unit directly into the wall jack. L If your unit is connected to a telephone line with DSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your DSL provider for details. L The name display service may not be available in some areas. Contact your telephone service provider for details. L Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. L The caller requested not to send caller information (page 22). L Generally, caller information is displayed from the 2nd ring. L The handset or base units ringer volume is turned off. Adjust it (page 16, 28). L The Talking Caller ID feature is turned off. Turn it on (page 28). L The ring count for the answering system is set to 2 or Toll saver. Select a different setting (page 34). L If the base unit and another handset are having an intercom call, your handset does not announce caller information. Cause/solution L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called unit is in use. Try again later. L If you are on a conference call, you cannot use the Slow Talk feature.

or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.) Panasonic Service and Technology Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks.) TTY users (hearing or speech impaired users) can call 1-866-605-1277.

Service in Puerto Rico

Panasonic Puerto Rico, Inc. San Gabriel Industrial Park, Ave. 65 de Infantera, Km. 9.5, Carolina, Puerto Rico 00985 Phone (787)750-4300, Fax (787)768-2910
TG607X.book Page 53 Tuesday, December 12, 2006 1:56 PM

Warranty

PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC. San Gabriel Industrial Park, Ave. 65 de Infantera, Km. 9.5, Carolina, Puerto Rico 00985
Panasonic Telephone Products Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (Limited Warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. Parts Labor One (1) Year One (1) Year During the Labor Limited Warranty period there will be no charge for labor. During the Parts Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new.

Mail-In Service

For assistance in the continental U.S.A. in obtaining repairs please ship the product prepaid to: Panasonic Service and Technology Company Customer Service Center 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic at 1-800-332-5368. When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached.

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 70AAAx3 Model no for telephone Panasonic KX-TGA230 TGA271 TGA272 TG2352 TG2382 Panasonic KX-FPG378 TG2302 TG2318 TG2336 TG2357 TG2880 TG5213 TG5425 TG5438 TG5480 TG5822 TG6500 TG5653

HHR-P103A

Capacity

700mAh

Ni-MH : 90AAAx3 Capacity 830mAh

HHR-P104A

FPG379 TG2303 TG2319 TG2343 TG2386 TG5050 TG5230 TG5426 TG5439 TG5543 TG5831 TG6502 TGA520
FPF 391 TG2308 TG2322 TG2344 TG2388 TG5055 TG5240 TG5428 TG5451 TG5561 TG5832 TG5631 TGA523
TG2312 TG2313 TG2314 TG2316 TG2323 TG2326 TG2328 TG2335 TG2346 TG2348 TG2355 TG2356 TG2396 TG2480 TG2488 TG2489 TG5200 TG5202 TG5210 TG5212 TG5243 TG5421 TG5422 TG5423 TG5431 TG5432 TG5433 TG5436 TG5452 TG5453 TG5456 TG5471 TG5566 TG5571 TG5576 TG5821 TG5838 TG5839 TG5861 TG5871 TG5632 TG5634 TG5651 TG5652 TGA550 TGA551 TGA552 TGA650
Ni-MH : 90AAAx2 Capacity 830mAh

HHR-P105A

Panasonic KX-TG2411 TG2420 TG2421 TG2422 TG2423 TG2424 TG2431 TG2432 TG2433 TG2434 TG2620 TG2621 TG2622 TG2623 TG2624 TG2628 TG2629 TG2631 TG2632 TG2633 TG2634 TG2638 TG2810 TG2811 TG2815 TG2820 TG2822 TG2825 TG2826 TG2831 TG2832 TG2835 TG2836 TG2853 TG2854 TG2873 TG2910 TG2920 TG2922 TG2931 TG2932 TG2935 TG2936 TG5621 TG5631 TG5632 TG5652 TG5672 TG5761 TG5762 TG5766 TG5767 TG5771 TG5776 TG5778 TG5779 TG6700 TG6702 TGA570 TGA571 TGA572 TGA670
Ni-MH : 65AAAx3 Capacity 650mAh
Panasonic KX-TG3021 TG3022 TG3031 TG3032 TG3033 TG3034 TG3510 TG3511 TG3520 TG3521 TG3522 TG3526 TG3531 TG3532 TG3533 TG3536 TG6021 TG6022 TG6023 TG6025 TG6026 TG6031 TG6032 TG6033 TG6034 TG6051 TG6052 TG6053 TG6054 TG6071 TG6072 TG6073 TG6074 TG6075 TGA300 TGA301 TGA351 TGA600 TGA601 KX-GT GT1500 GT1540 GTA150 - IP Phone

HHR-P107A

Ni-MH : 35AAX3 Capacity 350mAh

HHR-P301A

Panasonic KX-T3610 T3620 T3640 T3702 T3705 T3710 T3712 T3720 T3725 T3730 T3732 T3800 T3805 T3807 T3822 T3823 T3824 T3825 T3832 T3848 T3850 T3855 T3860 T3870 T3875 T3908 T3910 T3912 T3920 T3925 T3930 T3932 T3935 T3940 T3945 T3950 T3960 T3962 T3965 T3967 T3968 T3980 T4108 T4109 T4168 T4169 T4200 T4300 T4310 T4330 T4340 T4342 T4350 T4360 T4365 T4370 T4400 T4410 T4500 T4550 T4600 TC100 TC109 TC150 TC155 TC157 TC160 TC162 TC162B TC163 TC165 TC170 TC180 TC183 TC185 TC187 TC190 TC197 TC280 TC282 TC289 TC906 TCC106 TCC116 TCC425 TCM410 TCM410-M TCM412 TCM412-B TCM415 TCM417 TCM418 TCM420 TCM422 TCM424 TCM440 TCM440-B
To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 35AAX3 Capacity 350mAh Model no for telephone

HHR-P302A

Fits Cobra, GE, V-Tech, Nortwestern Bell, AT&T Southwestern Bell and SANYO CordlessPhone
Ni-MH : 35AAX3 Capacity 350mAh Fits AT&T, GE, Sears, Sony, Pacific Bell Bell South, Pac.Tel and Mognavox CordlessPhone

HHR-P303A

Ni-MH : 35AAX2 Capacity 350mAh Panasonic KX-TC1000 TC1000B TC1001 TC1001W TC1002
TC1005 TC1010 TC1040 TC1040W

HHR-P305A

Ni-MH : 120AAX3 Capacity 1150mAh
Panasonic KX-TG2396 TG2397 TG2400 TG2400B TG2405 TG2500 TG2505 TG2550 TG2560 TG2565 TG2570 TG2575

HHR-P401A

Ni-MH : 100AAX3 Capacity 1000mAh
Panasonic KX-TG2205 TG2207 TG2215 TG2217 TG2219 TG2227 TG2236 TG2237 TG2239 TG2247 TG2257 TG2267 TG2700 TG2720 TG2730 TG2740 TG2750 TG2770 TG2970 TG2970B TG5100 TG5110 TGA270 TGA273 TGA290 TGA290B TGA510

HHR-P402A

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 70AAX3 Model no for telephone Panasonic KX-TA38 FPC161 FPC165 FPC166 T800 T3800 T3815 T3821 T3830 T3831 T3835 T3842 T3845 T3880 T3900 TC901 TC904 TC907 TC907B TC911 TC917 TC917HSB TC933 TC933B TC934 TC934B TC935 TC935B TC955RUB TC956RUB TC976RUB TC1400 TC1401 TC1401B TC1403 TC1404 TC1405 TC1408 TC1410 TC1410B TC1413 TC1430 TC1430W TC1431 TC1431W TC1447 TC1447PK TC1450 TC1451B TC1451 TC1457 TC1460 TC1460B TC1460W TC1461 TC1461B TC1481 TC1481B TC1484 TC1493 TC1493CB TC1493CW TC1500 TC1501 TC1501B TC1520 TC1520B TC1503 TC1507 TC1696 TC1700 TC1701 TC1701B TC1703 TC1710 TC1710B TC1711 TC1711B TC1713 TC1720 TC1720B TC1721 TC1721B TC1722 TC1723 TC1731 TC1731B TC1733 TC1733CB TC1740 TC1740B TC1741 TC1741B TC1742 TC1743 TC1750 TC1750B TC1800 TC1800B TC1850 TC1850B TC1867 TC1870 TC1870B TC1890 TC1890B TC9568XB TCM939 TCM939B TCM941 TCM943 TCM944 TCM944B TCM947 TCM947B TCL100B Fits IBM, NorthwesternBell, SONY and Uniden Cordless Phone

HHR-P501A

Ni-MH : 150AAX3

HHR-P505A

1500mAh
P-P510A -> Replaced by HHR-P505A
Panasonic KX-TG200 TG200ALB TG200CB TG210 TG210ALB TGM240 TGM240B TC1801 TC1802 TC1805 TC1808 TC1811 TC1812 TC1831 TC1832 TC1851 TC1852 TC1855 TC1858 TC1861 TC1862 TC1863 TC1865 TC1866 TC1867 TC1868 TC1871 TC1872 TC1881 TC1882 TC1886 TC1887 TC1891 TC1892 TG2401 TG2403 TG2451 TG2481 TG2501 TG2502 TG2503 TG2506 TG2551 TG2552 TG2553 TG2559 TG2562 TG2563 TG2564 TG2581 TG2583 TG2584 TG2586 TG2593 TC1801 TC1811B TC1831B TC1851B TC1861B TC1866B TC1871B TC1886B TC1891B
2007.1- REPLACED Ni-MH : 150AAX2 Capacity 1500mAh Panasonic KX-TG2000 TG2000B TG4000 TG4000B TGA200 TGA400 TGA420

HHR-P506A

NI-cd Capacity 500mAh
Panasonic KX-TG2000 2000B TG4000 4000B

P-P507A

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 150AAX2 Capacity 1500mAh Model no for telephone Panasonic KX-TG2650 TG2670 TG2680 TG2650N TG2670N YG2680N TG2690N

HHR-P509A

Ni-MH : 160AAX2 Capacity 1500mAh
Panasonic KX-TG2208 TG2214 TG2216 TG2224 TG2226 TG2235 TG2238 TG2248 TG2258

HHR-P513A

Ni-MH : 70AAX3 Capacity 700Ah
Panasonic KX-T9500 T9505 T9509 T9520 T9550 TC905 TC930

HHR-P543A

No Data
Ni-MH : 150AAX2 Capacity 1500Ah Panasonic KX-TG1000 TG1050 TGA100 TGA100 TGA420B V Tech VT2431 VT2461 AT&T 2455

HHR-P546A

Ni-MH : 70AAX3 Capacity 700mAh
Panasonic KX-TC900 TC900B TC900W TC909 TC910 TC910B TC910DB TC914 TC919 TCC902 TCC912 TCC936 TCC942 TCM937 TCM938 TCM940 TCS970

HHR-P592A

To order by phone, call 1-800-332-5368 To order by web, visit http://www.pstc.panasonic.com/Epartr/PartsListChoice.asp Model No Spec Ni-MH : 150AAX3 Capacity 1500mAh Panasonic Model no for telephone

HHR-P515A

KX-THA16
Ni-MH : 110AAX5 Capacity 1000mAh Panasonic

HHR-P516A

KX-TG4500
Ni-MH : 70AAX1 Capacity 700mAh Panasonic KX-TGA101/1034/1033/1032 No Photo

HHR-4DPA