TG6411_6421E(e)_QG.fm Page 1 Monday, December 15, 2008 11:30 AM

Model No.

Quick Guide

Connections

Base unit
KX-TG6411E/KX-TG6412E KX-TG6413E KX-TG6421E/KX-TG6422E KX-TG6423E/KX-TG6424E

Correct

Click Use only the supplied telephone line cord. DSL/ADSL filter* (Not supplied) To telephone line Hooks Press plug firmly. Base unit

(220-240 V AC, 50 Hz)

Use only the supplied Panasonic AC adaptor.
*For DSL/ADSL service users Important: L If you use a telephone line cord which is not supplied, the unit may not work properly.

Charger

Press plug firmly.
Hooks (220-240 V AC, 50 Hz) Use only the supplied Panasonic AC adaptor.

PNQW1499ZA

DC1208DG0
TG6411_6421E(e)_QG.fm Page 2 Monday, December 15, 2008 11:30 AM
Battery installation/Battery charge
Charge for about 7 hours.
Confirm Charging is displayed. Rechargeable Ni-MH ONLY
Note: L USE ONLY Ni-MH batteries AAA (R03) size. L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L When the language selection is displayed after installing the batteries for the first time, you can select your desired language. {V}/{^}: Select your desired language. i M i {ih}

Operating tips

Navigator key/? (Volume) key
By pressing this key ({^} or {V}) repeatedly, you can: scroll through (up or down) various lists or items adjust the receiver or speaker volume (up or down) while talking move the cursor (left or right) to edit number or name

Volume up {^}

{V} Volume down

Soft keys

The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display.
TG6411_6421E(e)_QG.fm Page 3 Monday, December 15, 2008 11:30 AM

Date and time (Handset)

8 (middle soft key) {V}/{^}: Handset Setup i M {V}/{^}: Time Settings i M {V}/{^}: Set Date/Time i M Enter the current date, month, and year. i M Enter the current hour and minute. M i {ih}

Basic operations

Making/Answering calls (Handset) Making calls Answering calls To hang up To adjust the receiver/ speaker volume Making a call using the redial list Handset ringer volume Dial the phone number. i {C}/{s} {C}/{s} {ih} Press {^} or {V} repeatedly while talking. j (right soft key) i {V}/{^}: Select the desired phone number. i {C}
8 (middle soft key) {V}/{^}: Handset Setup i M {V}/{^}: Ringer Setup i M {V}/{^}: Ringer Volume i M {V}/{^}: Select the desired volume. i M i {ih}
Phonebook (Handset) Adding entries
1 n (left soft key) i {V}/{^}: New Entry i M 3 Enter the partys name (16 characters max.). i
M L You can change the character entry mode by pressing /. L To enter a name, see the character table in the operating instructions.
4 Enter the partys phone number (24 digits max.).

i M 2 times i {ih}

TG6411_6421E(e)_QG.fm Page 4 Monday, December 15, 2008 11:30 AM
Phonebook (Handset) Making calls
1 n (left soft key) 2 {V}/{^}: Select the desired entry.
L You can scroll through the phonebook entry by pressing and holding {V} or {^}.
Answering system (Base unit): KX-TG6421/KX-TG6422/KX-TG6423/KX-TG6424 Answering on/off Listening to messages Press {s} to turn on/off the answering system. {6}
Frequently asked questions
Question Why is w flashing? Cause/solution L The handset is too far from the base unit. Move closer. L The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit. Register it (page 6). L Make sure the batteries are installed correctly. L Fully charge the batteries. L Clean the charge contacts and charge again. L When you are using fully-charged Ni-MH batteries (supplied batteries); In continuous use: 18 hours max. Not in use (standby): 170 hours max. L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use). L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
What should I do when the handset does not turn on? How long is the battery operating time?
TG6411_6421E(e)_QG.fm Page 5 Monday, December 15, 2008 11:30 AM
Question Can I keep the handset on the base unit or charger when I am not using it? When should I replace the batteries? What is a PIN? Cause/solution L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries. L If the batteries are fully charged until & is displayed, but ) is displayed after a few calls, replace the batteries with new ones. L The PIN is a 4-digit number that must be entered in order to change certain base unit settings. The default PIN is 0000. L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. L The message You must first subscribe to Caller ID. will be displayed until you receive caller information after subscribing to a Caller ID service. L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L Move closer to the base unit. L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. L Clean the battery ends (S, T) and the charge contacts with a dry cloth and charge again.

What should I do to display caller information?
What should I do when noise is heard, sound cuts in and out?
What should I do when the operating time seems to be shorter even after I fully charged the batteries? What do I need to do to erase y (Missed call) from the display?
L There are unviewed missed calls remaining. View them and erase y in the following way.
(middle soft key) 2 {V}/{^}: Caller List i M 3 Press {V} to search from the most recent call, or
press {^} to search from the oldest call.
TG6411_6421E(e)_QG.fm Page 6 Monday, December 15, 2008 11:30 AM
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. Handset
(middle soft key) 2 {V}/{^}: Handset Setup i M 3 {V}/{^}: Register H.set i M
Base unit Proceed with the operation for your model. N KX-TG6411/KX-TG6412/KX-TG6413 Press and hold {x} for about 5 seconds. (No registration tone)
N KX-TG6421/KX-TG6422/KX-TG6423/ KX-TG6424 Press and hold {x} for about 5 seconds, until the registration tone sounds. L The next step must be completed within 90 seconds.
Handset Wait until Base PIN is displayed. i Enter the base unit PIN (default: 0000). i M L When the handset has been registered successfully, w stops flashing.
TG6411_6421E(e)_QG.fm Page 7 Monday, December 15, 2008 11:30 AM
Optional service (Caller ID)
If you subscribe to a Caller ID service,

012345

caller information will be displayed when a call is received, or when viewing missed calls.
Sales and support information
Customer Care Centre L For customers within the U.K.: 3898 L For customers within the Republic of Ireland: L Visit our website for product information: www.panasonic.co.uk L E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic U.K. L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays). L Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk L Most major credit and debit cards accepted. L All enquiries transactions and distribution facilities are provided directly by Panasonic U.K. Ltd. L It couldnt be simpler! L Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.
Customer Care Helpline Tel. No.: U.K. 3898 / R.O.I. 01289 8333
TG6411_6421E(e)_QG.fm Page 8 Monday, December 15, 2008 11:30 AM

IMPORTANT

If you have any problems operating this product, please try the following:
1 Reconnect AC adaptor. 2 Use supplied telephone line cord. 3 Use rechargeable Ni-MH batteries.
(Alkaline batteries CANNOT be used.)
Refer to Troubleshooting in Operating Instructions and FAQs in this Quick Guide.

If you still have any problems, please call the Panasonic DECT Helpline
3898 (U.K.) (Rep of Ireland)
Lost Operating Instructions? Download at www.panasonic.co.uk.