How To Register Handset to Base Unit
Find your model number in the left-hand column and follow the instructions in the adjoining righthand column. Model Number KX- TG5200 TG5202 TG5210 TG5212 TG5230 TG5240 TG5242 TG5243 TGA520 TGA523 Instructions 1) On handset, press MENU, 0, 0, 1. Handset display should show as follows:
*Skip this step when handset already shows as above. 2) On base unit, press LOCATOR for 3 sec until the CHARGE LED flashes. 3) On handset, press OK button. Then wait until handset display changes as follows:
*If this does not work, your unit is defective. Please send your unit for service. KX- TG6500 TG6502 TGA650 1) On handset, press MENU, 0, 0, 1. Handset display should show as follows:
*Skip this step when handset already shows as above. 2) On base unit, press LOCATOR for 3 sec until CHARGE LED flashes. 3) On handset, press OK button. Then wait until handset display changes as follows:
*If this does not work, your unit is defective. Please send your unit for service. KX- TG2700 TG2720 TG2730 TG2740 TG2750 TG2770 TGA270 TGA271 TGA272 TGA273 1) On handset, press FUNCTION. Then, using the Navigator key, press down (V) 4 times, right (>) 1 time, down (V) 7 times and right (>) 2 times. Handset display should show as follows:
*Skip this step when handset already shows as above. 2) On base unit, press MUTE. (MUTE LED flashes.) 3) On handset, press OK button. Then wait until handset display changes as follows:
*If this does not work, your unit is defective. Please send your unit for service.
KX- TG2352 TG2382 TG2383 TGA230
1) Press FUNCTION on handset. Then, using the Navigator key, press Down (V) 4 times, Right (>) 1 time, Down (V) 5 times and Right (>) 2 times. Handset display should show as follows:
*Skip this step when handset already shows as above. 2) On base unit, press LOCATOR [ALL] for 3 seconds until CHARGE LED flashes. 3) Then, using the Navigator key on the handset, press Right (>) button. Then wait until handset display changes as follows:
*If this does not work, your unit is defective. Please send your unit for service. KX- TG5100 TG5110 TGA510 1) Press FUNCTION on handset. Then, using the Navigator key, press Down (V) 3 times, Right (>) 1 time, Down (V) 6 times and Right (>) 2 times. Handset display should show as follows:
*If this does not work, your unit is defective. Please send your unit for service. KX- TG2312 TG2313 TG2335 TG2336 TG2343 TG2346 TG2355 TG2356 TG2386 TG5050 TG5055 1) On base unit, press LOCATOR for 3 sec. (CHARGE LED flashes.) 2) On handset, press FLASH for 3sec. (Handset display shows "Handset Registering".) Then wait until handset display changes as follows.

KX- TG2314 TG2344

1) On base unit, press LOCATOR [1] or [2] for 3 seconds. (CHARGE LED flashes.) *Select LOCATOR [1] or [2] depending on handset number you are registering. 2) On handset, press FLASH for 3 seconds. (Handset display shows "Handset Registering".) Then wait until handset display changes as follows:
*If this does not work, your unit is defective. Please send your unit for service. KX- TG2357 1) On base unit, press LOCATOR [1] or [2] for 3 seconds. (CHARGE LED light flashes.) *Select 1 or 2 depending on handset number you are registering. 2) On handset, press FLASH for 3 seconds. (Handset display shows "Handset Registering".) Then wait until handset display changes as follows:
*If this does not work, your unit is defective. Please send your unit for service. KX- TG2302 TG2322 1) On base unit, press LOCATOR for 3 seconds. (CHARGE LED flashes.) 2) On handset, press FLASH for 3 seconds. (VOICE ENHANCER LED flashes.) Then wait until a long beep sounds. *If this does not work, your unit is defective. Please send your unit for service. KX- TG2970 TGA290 1) Press FUNCTION on handset. Then, using the Navigator key, press Right (>) 1 time, Down (V) 3 times, Right (>) 1 time, Down (V) 4 times and Right (>) 2 times. Handset display should show as follows:

TGA520.fm Page 1 Tuesday, January 20, 2004

4:39 PM

5.8 GHz Expandable Cordless Handset Model No. KX-TGA520

Installation Manual

PLEASE READ BEFORE USE AND SAVE.
This handset is an accessory cordless handset, for use with Panasonic base units KX-TG5200/KX-TG5202/KX-TG5210/KX-TG5212/KX-TG5213/KX-TG5230/KX-TG5240/ KX-FPG391. This installation manual only describes the steps necessary to start up the handset. Please read the base unit operating instructions for further details.
Accessories (included) For extra orders, call 1-800-332-5368.

A Charger Unit.one

Charger Order No. PQLV30024ZM AC Adaptor Order No. KX-TCA1-G (KX-TCA1) A Handset Cover.one Order No. PQKK10142Z1

A Battery.one

Order No. HHR-P104

A Belt Clip.one

Order No. PQKE10377Z1

Installation

Connect the Charger unit
Power Outlet (AC 120 V, 60 Hz) AC Adaptor
USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

Install the battery

Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover.
For assistance, please call: 1-800-211-PANA(7262) 1

PQQX14000ZA S0104-0

TGA520.fm Page 2 Tuesday, January 20, 2004

Charging the battery

Place the handset on the charger and charge for 6 hours before initial use. The unit beeps once, the CHARGE indicator lights and Charging is displayed. When the battery is fully charged, Charge completed is displayed if there are no new calls in the Caller List. Recharge the battery when: Recharge battery is displayed on the handset, 3 flashes, or the handset beeps intermittently while it is in use.

Charge Contacts

CHARGE Indicator
If the battery has been discharged, the handset will display Charge for 6 HRS and 4 when you place the handset on the charger. The handset will not work unless the battery is charged. Continue charging.
Handset battery information
After your Panasonic battery is fully charged, you can expect the following performance: Operation While in use (TALK) While not in use (Standby) While using the Clarity Booster feature Operating time Up to 5 hours Up to 11 days Up to 3 hours
Clean the charge contacts of the handset and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

Belt Clip

You can hang the handset on your belt or pocket using the included belt clip.

To attach the belt clip

To remove the belt clip While pressing the top of the clip (1), pull the right edge in the direction of the arrow (2).
TGA520.fm Page 3 Tuesday, January 20, 2004

Registration

This cordless handset must be registered to a KX-TG5200/KX-TG5202/KX-TG5210/ KX-TG5212/KX-TG5213/KX-TG5230/KX-TG5240/KX-FPG391 base unit. The handset will be assigned the extension number at registration. Only one handset can be registered at a time. Charge the battery fully. Make sure the base unit and the other handsets are not being used. Have both the handset and base unit nearby during registration. *LOCATOR Button

Press LOCATOR on base unit for 3 sec. Then press OKL

BACK OK

To operate OK , press the right soft key.
Base unit model shown here is KX-TG5240. * The location of the LOCATOR button varies by base unit model. ] KX-TG5200/KX-TG5202: LOCATOR [ ], [ ], [ ], [ ] or [ KX-TG5210/KX-TG5212/KX-TG5213: LOCATOR/INTERCOM [ ], [ ], [ ], [ KX-TG5230/KX-TG5240/KX-FPG391: [LOCATOR/INTERCOM/TRANSFER] The handset display shows the instructions as shown on the right.

] or [

BACK P LAY OK
1 Base unit: Press and hold the *LOCATOR button for 3 seconds.
The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. On the KX-FPG391, HS REGISTRATION is displayed.

2 Handset:

(1) Press the soft key ( OK ).
Handset Registering Handset [2] Registered

IN USE

SPIPRIVACY1[-]
(2) Wait until a long beep sounds and the display shows the new extension number.
Registration is complete.

Ex. Extension number 2

SPIPRIVACY1[2]
The registered number [1] to [4] is shown on the top right of the display. You can stop registration by pressing [OFF] on the handset and pressing the *LOCATOR button on the base unit. If you try to register this handset to the KX-TG6500 base unit, Wrong handset Refer to manual is displayed. The base units for this handset are mentioned above. To cancel the handset registration, please see your base unit Operating Instructions. For assistance, please call: 1-800-211-PANA(7262) 3
TGA520.fm Page 4 Tuesday, January 20, 2004
Selecting the display language
You can select either English or Spanish as the display language. The factory preset is English. Press [MENU] N [d] or [B] to select Initial setting N Soft key ( SELECT ) N N [d] or [B] to select Change language N Soft key ( SELECT ) N Soft key ( ) to select Espaol, or soft key ( ENGLISH ) to select English N Soft key ( GUARDAR ) for Spanish, or soft key ( SAVE ) for English N [OFF]

Optional Headset

Connecting an optional headset to the handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the accessories telephone number on page 1.

Connecting an optional headset
Open the headset jack cover, and insert the headset plug into the headset jack as shown below. Headset Jack
Headset sold separately. Model shown here is KX-TCA88.

Wall Mounting

The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template (see below). Mount the charger (A). Slide it down (B), then slide down to the right (C) until it is secured. 2.45 cm (3132")

Screws To Power Outlet

2.45 cm (3132")

Wall Template

TGA520.fm Page 5 Tuesday, January 20, 2004
FCC and Other Information
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1. Remain on the line and briefly explain to the dispatcher the reason for the call. 2. Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Operating near 5.8GHz electrical appliances may cause interference. Move away from the electrical appliances. FCC RF Exposure Warning: To comply with FCC RF exposure requirements, the handset unit may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided. This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.

For assistance, please call: 1-800-211-PANA(7262) 5
TGA520.fm Page 6 Tuesday, January 20, 2004

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Use only the battery(ies) specified. 2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal instructions. 3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. 4. Exercise care in handling batteries in order not to short the battery to conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns. 5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is easily accessible.
For your future reference
Serial No. (found on the bottom of the unit) Name and address of dealer Date of purchase
If you need assistance with the setup or operation, please call 1-800-211-PANA(7262)
For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico For customer inquiries:
Visit our website: http://www.panasonic.com/support Contact us via the web at: http://www.panasonic.com/contactinfo
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantera, Km. 9.5, San Gabriel Industrial Park Carolina, Puerto Rico 00985
2004 Panasonic Communications Co., Ltd. All Rights Reserved.
TGA520.fm Page 7 Tuesday, January 20, 2004
Unidad porttil inalmbrica expandible de 5.8 GHz Modelo KX-TGA520

Manual de instalacin

LALO ANTES DE LA UTILIZACIN Y LUEGO GURDELO.
Esta unidad porttil es una unidad inalmbrica accesoria utilizable con las unidades base KX-TG5200/KX-TG5202/KX-TG5210/KX-TG5212/KX-TG5213/KX-TG5230/KX-TG5240/ KX-FPG391 de Panasonic. Este manual de instalacin slo describe los pasos necesarios para poner en funcionamiento la unidad porttil. Lea las instrucciones de funcionamiento de la unidad base para ms detalles.
Accesorios (incluidos) Para ms pedidos, llame al 1-800-332-5368.

A Unidad de carga.una

N. de pedido de la unidad de carga: PQLV30024ZM N. de pedido del adaptador de CA: KX-TCA1-G (KX-TCA1) A Cubierta de la unidad porttil.una N. de pedido: PQKK10142Z1