TG7200_7220E(e)_QG.fm Page 1 Tuesday, May 15, 2007 9:42 AM

Digital Cordless Phone

Model No.
KX-TG7200E/KX-TG7202E KX-TG7203E KX-TG7220E/KX-TG7222E KX-TG7223E/KX-TG7224E
Digital Cordless Answering System

Quick Guide

Connections

Base unit

Press plug firmly.
Click Hook To AC mains outlet (220240 V, 50 Hz)
To telephone line USE ONLY the supplied cord.
USE ONLY the supplied AC adaptor.
Important: L If you use a telephone line cord which is not supplied, the unit may not work properly.

Charger

(KX-TG7202/KX-TG7203/KX-TG7222/KX-TG7223/KX-TG7224) Press plug firmly.
Hooks To AC mains outlet (220240 V, 50 Hz)
USE ONLY the supplied AC adaptor (smaller).

PQQW15742ZA

DC0407DS0
TG7200_7220E(e)_QG.fm Page 2 Tuesday, May 15, 2007 9:42 AM
Battery installation/Battery charge

Initial charge: 7 hours

Rechargeable Ni-MH ONLY Base unit *1 Charger *2
Charging will be displayed.
*1 The pictured model is KX-TG7200. *2 KX-TG7202/KX-TG7203/KX-TG7222/ KX-TG7223/KX-TG7224
Note: L USE ONLY rechargeable Ni-MH batteries. L Do NOT use Alkaline/Manganese/Ni-Cd batteries.

Operating tips

Using the navigator key
Press {^}, {V}, {<}, or {>} to navigate through menus and to select items shown on the display. Adjusting the receiver or speaker volume (?) Press {^} or {V} while on a call.

{^} {<} {V} {>}

Date and time
1 {j/OK} 2 Press {^} or {V} to select Handset Setup. i {>} 3 Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203 Press {^} or {V} to select Set Date & Time. i {>} NKX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224 Press {^} or {V} to select Time Settings. i {>} i Press {^} or {V} to select Set Date & Time. i {>} Enter the current date, month, and year.
Enter the current hour and minute. 6 {j/OK} i {ih}
TG7200_7220E(e)_QG.fm Page 3 Tuesday, May 15, 2007 9:42 AM

Basic operations

C Making/Answering calls (Handset) Making calls Answering calls Hanging up Receiver/speaker volume Making a call using the redial list Handset ringer volume Dial the phone number. i {C}/{s} {C}/{s} {ih} Press {^} or {V} while on a call. {R} i {^}/{V}: Select the desired number. i {C}
{j/OK} {^}/{V}: Handset Setup i {>} {^}/{V}: Ringer Setup i {>} {^}/{V}: Ringer Volume i {>} {^}/{V}: Select the desired volume. i {>} i {ih}
k Phonebook (Handset) Adding entries (names and phone numbers)
1 {k} i {j/OK} 2 {^}/{V}: New Entry i {>} 3 Enter the partys name (16 characters max.). i

{j/OK}

4 Enter the partys phone number (24 digits max.).

i {j/OK}

5 {^}/{V}: Save i {>} i {ih}
L To enter a name, see the character table in the operating instructions. Making calls
1 {k} 2 {^}/{V}: Select the desired entry. i {C}
I Answering system (Base unit): KX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224 Answering on/off Listening to messages Press {s} to turn on/off the answering system. {6}
TG7200_7220E(e)_QG.fm Page 4 Tuesday, May 15, 2007 9:42 AM
Frequently asked questions
Question Why is w flashing? Cause & solution L The handset is too far from the base unit. Move closer. L The base unit AC adaptor is not connected. Check the connections. L You are using the handset or base unit in an area with high electrical interference. Place the handset and base unit away from interference sources, such as antennas and mobile phones. L The handset is not registered to the base unit. Register it (page 6). L Make sure that the batteries are installed correctly. L Fully charge the batteries. L Clean the charge contacts and charge again. L When you are using fully-charged Ni-MH batteries (supplied batteries); In continuous use: 17 hours max. In continuous standby mode: 180 hours max. L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use). L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby). L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries. L If the batteries are fully charged until 5 is displayed, but 7 is displayed after a few calls, replace the batteries with new ones. L The PIN is a 4-digit number that must be entered in order to change certain base unit settings. The default PIN is 0000. L You need to subscribe to Caller ID service. Consult your service provider/telephone company for details. L The message You must first subscribe to Caller ID. will be displayed until you receive caller information after subscribing to Caller ID service.

What should I do when the handset does not turn on?
How long is the battery operating time?
Can I keep the handset on the base unit or charger when I am not using it? When should I replace the batteries? What is a PIN?
What do I need to do to display caller information?
TG7200_7220E(e)_QG.fm Page 5 Tuesday, May 15, 2007 9:42 AM
What should I do when: I hear static or sound cuts in and out? there is interference from other electrical units? L Place the handset and the base unit away from other electrical appliances. L Move closer to the base unit. L Your unit is connected to a telephone line with DSL service. We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. L Wipe the battery ends (S, T) and the unit contacts with a dry cloth.
What should I do when the operating time seems to be short even after I fully charged the batteries? What do I need to do to erase the missed call number (for example, 3 Calls) from the display?
L There are unviewed missed calls remaining. View them using the following method.
1 {j/OK} 2 {^}/{V}: Caller List i {>} 3 Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
TG7200_7220E(e)_QG.fm Page 6 Tuesday, May 15, 2007 9:42 AM
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. When you purchase an additional handset, refer to the additional handsets installation manual for registration. If for some reason the handset is not registered to the base unit, register the handset.
{j/OK} {^}/{V}: Handset Setup i {>} {^}/{V}: Registration i {>} {^}/{V}: Register H.set i {>}
5 Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203 Press and hold {x} on the base unit for about 5 seconds. (No registration tone)
NKX-TG7220/KX-TG7222/KX-TG7223/ KX-TG7224 Press and hold {x} on the base unit for about 5 seconds, until the registration tone sounds.
6 Wait until Enter Base PIN is displayed.
i Enter the base unit PIN (default: 0000). i {j/OK}
TG7200_7220E(e)_QG.fm Page 7 Tuesday, May 15, 2007 9:42 AM
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
display caller information

012345

Sales and support information
Customer Care Centre L For customers within the UK: 3898 L For customers within the Republic of Ireland: L Visit our website for product information: www.panasonic.co.uk L E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays). L Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk L Most major credit and debit cards accepted. L All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. L It couldnt be simpler! L Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.

Customer Care Helpline Tel. No.: U.K. 3898 / R.O.I. 01289 8333
TG7200_7220E(e)_QG.fm Page 8 Tuesday, May 15, 2007 9:42 AM

IMPORTANT

If you have problems setting up or operating this product please call the Panasonic DECT Helpline 3898 (UK) (Repl of Ireland)

TGA721E(e).fm Page 1 Tuesday, May 22, 2007 9:53 AM

Installation Manual

Additional Digital Cordless Handset Model No. KX-TGA721E
This unit is an additional handset for use with the following Panasonic Digital Cordless Phones: KX-TG7200/KX-TG7220 You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base units operating instructions for further details. Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and save it for future reference.
TGA721E(e).fm Page 2 Tuesday, May 22, 2007 9:53 AM
Thank you for purchasing a new Panasonic digital cordless phone.

Supplied accessories

Charger Part No. PQLV30055Z AC adaptor Part No. PQLV209EZ (PQLV209E) Rechargeable batteries AAA (R03) size Part No. HHR-55AAAB Handset cover*1 Part No. PQYNTG7200E
*1 The handset cover comes attached to the handset. Note: Please read the base units operating instructions for additional/replacement accessories. This equipment is designed for use in the UK and Republic of Ireland. In the event of problems, you should contact your equipment supplier in the first instance.

Important information

General Use only the AC adaptor supplied with this product. Do not connect the AC adaptor to any AC outlet other than a standard 220-240 V AC outlet. This product is unable to make calls when:
- the portable handset battery(ies) need recharging or have failed. - there is a power failure. - the key lock feature is turned on.
Do not open the charger or handset other than to replace the battery(ies). This product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers. Care should be taken that objects do not fall onto, and liquids are not spilled into, the product. Do not subject this product to excessive smoke, dust, mechanical vibration or shock.
Helpline Tel. No.: U.K. 3898 R.O.I. 01289 8333
TGA721E(e).fm Page 3 Tuesday, May 22, 2007 9:53 AM
Environment Do not use this product near water. This product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 C or greater than 40 C. The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. Warning: To prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture. Unplug this product from power outlets if it emits smoke, an abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre. Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. Do not damage the power cord/plug. This may cause a short circuit, electric shock, and/or fire. Do not touch the plug with wet hands. Battery caution We recommend using the supplied battery(ies) or additional/replacement battery(ies) noted in the base units operating instructions. Use only rechargeable battery(ies). Do not mix old and new batteries. Do not dispose of the battery(ies) in a fire, as they may explode. Check with local waste management codes for special disposal instructions. Do not open or mutilate the battery(ies). Released electrolyte from the battery(ies) is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care when handling the battery(ies). Do not allow conductive materials such as rings, bracelets or keys to touch the battery(ies), otherwise a short circuit may cause the battery(ies) and/or the conductive material to overheat and cause burns. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

TGA721E(e).fm Page 4 Tuesday, May 22, 2007 9:53 AM
Only use a compatible base unit (or charger) to charge the battery(ies). Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the battery(ies) to swell or explode. Notice for product disposal, transfer, or return This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase the information such as phonebook or caller list entries from the memory before you dispose, transfer or return the product. Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
TGA721E(e).fm Page 5 Tuesday, May 22, 2007 9:53 AM

Connection

The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Location For maximum distance and noise-free operation, place your base unit:
- away from electrical appliances such as TVs, radios, personal computers, or other phones. - in a convenient, high, and central location.
Battery installation/Battery charge
Important: Use only the supplied rechargeable batteries noted on page 2, 3. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. Do NOT use Alkaline/Manganese/Ni-Cd batteries. Ensure correct polarities (S, T) when installing the batteries. Wipe the battery ends (S, T) with a dry cloth. When installing the batteries, avoid touching the battery ends (S, T) or the unit contacts.
1 Press the notch on the handset cover firmly and slide it in the direction of the

arrow.

2 Insert the batteries negative (T) end first. Close the handset cover. 3 Place the handset on the charger for about 7 hours before initial use.
Note: The handset display may show Please Wait. when the handset is placed on the charger if it is not registered to a base unit. If you fully charged the batteries, but the operating time seems to be short, wipe the battery ends (S, T) and the unit contacts with a dry cloth.
TGA721E(e).fm Page 6 Tuesday, May 22, 2007 9:53 AM
Registering the handset to the KX-TG7200/KX-TG7220 base unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for few seconds to turn the handset on.
1 Lift the handset and press {ih}. Place the handset on the base unit. 2
Continue the operation even when the handset display shows Please Wait. Proceed with the operation for your model. N KX-TG7200 Press and hold {x} on the base unit for about 5 seconds. (No registration tone)
N KX-TG7220 Press and hold {x} on the base unit for about 5 seconds, until the registration tone sounds.
3 With the handset still on the base unit, wait until a confirmation tone sounds
and w stops flashing. Note: If an error tone sounds, or if w is still flashing, register the handset according to the base units operating instructions. If all registered handsets start ringing in step 2, press {x} to stop. Start again from step 1. The KX-TG7200 does not feature an answering system. Answering system features are available only when this handset is registered to the KX-TG7220.
TGA721E(e).fm Page 7 Tuesday, May 22, 2007 9:53 AM
Declaration of Conformity: Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de Contact: Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany
TGA721E(e).fm Page 8 Tuesday, May 22, 2007 9:53 AM
Sales and support information Customer Care Centre For customers within the UK: 3898 For customers within the Republic of Ireland: Visit our website for product information: www.panasonic.co.uk E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays). Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk Most major credit and debit cards accepted. All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. It couldnt be simpler! Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.

1999/5/EC Sales Department: Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP Panasonic Communications Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. 2007 Panasonic Communications Co., Ltd. All Rights Reserved.

PQQX16128ZA

DC0407DS1057