TG7200_7220E(e)_QG.fm Page 1 Tuesday, May 15, 2007 9:42 AM

Digital Cordless Phone

Model No.
KX-TG7200E/KX-TG7202E KX-TG7203E KX-TG7220E/KX-TG7222E KX-TG7223E/KX-TG7224E
Digital Cordless Answering System

Quick Guide

Connections

Base unit

Press plug firmly.
Click Hook To AC mains outlet (220240 V, 50 Hz)
To telephone line USE ONLY the supplied cord.
USE ONLY the supplied AC adaptor.
Important: L If you use a telephone line cord which is not supplied, the unit may not work properly.

Charger

(KX-TG7202/KX-TG7203/KX-TG7222/KX-TG7223/KX-TG7224) Press plug firmly.
Hooks To AC mains outlet (220240 V, 50 Hz)
USE ONLY the supplied AC adaptor (smaller).

PQQW15742ZA

DC0407DS0
TG7200_7220E(e)_QG.fm Page 2 Tuesday, May 15, 2007 9:42 AM
Battery installation/Battery charge

Initial charge: 7 hours

Rechargeable Ni-MH ONLY Base unit *1 Charger *2
Charging will be displayed.
*1 The pictured model is KX-TG7200. *2 KX-TG7202/KX-TG7203/KX-TG7222/ KX-TG7223/KX-TG7224
Note: L USE ONLY rechargeable Ni-MH batteries. L Do NOT use Alkaline/Manganese/Ni-Cd batteries.

Operating tips

Using the navigator key
Press {^}, {V}, {<}, or {>} to navigate through menus and to select items shown on the display. Adjusting the receiver or speaker volume (?) Press {^} or {V} while on a call.

{^} {<} {V} {>}

Date and time
1 {j/OK} 2 Press {^} or {V} to select Handset Setup. i {>} 3 Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203 Press {^} or {V} to select Set Date & Time. i {>} NKX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224 Press {^} or {V} to select Time Settings. i {>} i Press {^} or {V} to select Set Date & Time. i {>} Enter the current date, month, and year.
Enter the current hour and minute. 6 {j/OK} i {ih}
TG7200_7220E(e)_QG.fm Page 3 Tuesday, May 15, 2007 9:42 AM

Basic operations

C Making/Answering calls (Handset) Making calls Answering calls Hanging up Receiver/speaker volume Making a call using the redial list Handset ringer volume Dial the phone number. i {C}/{s} {C}/{s} {ih} Press {^} or {V} while on a call. {R} i {^}/{V}: Select the desired number. i {C}
{j/OK} {^}/{V}: Handset Setup i {>} {^}/{V}: Ringer Setup i {>} {^}/{V}: Ringer Volume i {>} {^}/{V}: Select the desired volume. i {>} i {ih}
k Phonebook (Handset) Adding entries (names and phone numbers)
1 {k} i {j/OK} 2 {^}/{V}: New Entry i {>} 3 Enter the partys name (16 characters max.). i

{j/OK}

4 Enter the partys phone number (24 digits max.).

i {j/OK}

5 {^}/{V}: Save i {>} i {ih}
L To enter a name, see the character table in the operating instructions. Making calls
1 {k} 2 {^}/{V}: Select the desired entry. i {C}
I Answering system (Base unit): KX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224 Answering on/off Listening to messages Press {s} to turn on/off the answering system. {6}
TG7200_7220E(e)_QG.fm Page 4 Tuesday, May 15, 2007 9:42 AM
Frequently asked questions
Question Why is w flashing? Cause & solution L The handset is too far from the base unit. Move closer. L The base unit AC adaptor is not connected. Check the connections. L You are using the handset or base unit in an area with high electrical interference. Place the handset and base unit away from interference sources, such as antennas and mobile phones. L The handset is not registered to the base unit. Register it (page 6). L Make sure that the batteries are installed correctly. L Fully charge the batteries. L Clean the charge contacts and charge again. L When you are using fully-charged Ni-MH batteries (supplied batteries); In continuous use: 17 hours max. In continuous standby mode: 180 hours max. L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use). L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby). L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries. L If the batteries are fully charged until 5 is displayed, but 7 is displayed after a few calls, replace the batteries with new ones. L The PIN is a 4-digit number that must be entered in order to change certain base unit settings. The default PIN is 0000. L You need to subscribe to Caller ID service. Consult your service provider/telephone company for details. L The message You must first subscribe to Caller ID. will be displayed until you receive caller information after subscribing to Caller ID service.

What should I do when the handset does not turn on?
How long is the battery operating time?
Can I keep the handset on the base unit or charger when I am not using it? When should I replace the batteries? What is a PIN?
What do I need to do to display caller information?
TG7200_7220E(e)_QG.fm Page 5 Tuesday, May 15, 2007 9:42 AM
What should I do when: I hear static or sound cuts in and out? there is interference from other electrical units? L Place the handset and the base unit away from other electrical appliances. L Move closer to the base unit. L Your unit is connected to a telephone line with DSL service. We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. L Wipe the battery ends (S, T) and the unit contacts with a dry cloth.
What should I do when the operating time seems to be short even after I fully charged the batteries? What do I need to do to erase the missed call number (for example, 3 Calls) from the display?
L There are unviewed missed calls remaining. View them using the following method.
1 {j/OK} 2 {^}/{V}: Caller List i {>} 3 Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
TG7200_7220E(e)_QG.fm Page 6 Tuesday, May 15, 2007 9:42 AM
Registering a handset to the base unit
The supplied handset and base unit are pre-registered. When you purchase an additional handset, refer to the additional handsets installation manual for registration. If for some reason the handset is not registered to the base unit, register the handset.
{j/OK} {^}/{V}: Handset Setup i {>} {^}/{V}: Registration i {>} {^}/{V}: Register H.set i {>}
5 Proceed with the operation for your model.
NKX-TG7200/KX-TG7202/KX-TG7203 Press and hold {x} on the base unit for about 5 seconds. (No registration tone)
NKX-TG7220/KX-TG7222/KX-TG7223/ KX-TG7224 Press and hold {x} on the base unit for about 5 seconds, until the registration tone sounds.
6 Wait until Enter Base PIN is displayed.
i Enter the base unit PIN (default: 0000). i {j/OK}
TG7200_7220E(e)_QG.fm Page 7 Tuesday, May 15, 2007 9:42 AM
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
display caller information

012345

Sales and support information

Customer Care Centre L For customers within the UK: 3898 L For customers within the Republic of Ireland: L Visit our website for product information: www.panasonic.co.uk L E-mail: customer.care@panasonic.co.uk Direct Sales at Panasonic UK L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays). L Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk L Most major credit and debit cards accepted. L All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. L It couldnt be simpler! L Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.
Customer Care Helpline Tel. No.: U.K. 3898 / R.O.I. 01289 8333
TG7200_7220E(e)_QG.fm Page 8 Tuesday, May 15, 2007 9:42 AM

IMPORTANT

If you have problems setting up or operating this product please call the Panasonic DECT Helpline 3898 (UK) (Repl of Ireland)

KX-TG7220ES DECT Cordless Telephone
Answering Machine with 20 min. Recording Time Large illuminated display and keypad Speakerphone Easy operation Polyphonic ringer melodies 50 Phonebook

Functions

GAP Multiple Handsets yes Up to 6 Handsets

Handset

Navigation Key Speakerphone Headset Jack Ringer LED yes yes no no

Redial

Redial Memory Mute 10 (Number & Name) yes

Caller ID

Caller ID Compatibility Caller ID Log yes 50 items

Phonebook

Number of Entries Phonebook Copy 50 items (Name & Number) (16 char / 24 digits) yes

Ringer

Number of Melodies 16 (Polyphonic) Number of Tones (Pre-installed) 5 Ringer Volume (6 steps + off) yes
LCD Type LCD Backlight Dot 3-Line mono Amber
Time & Date (Clock) Alarm Call Restriction Conference Call Any Key Answer Multiple Language Display Yes Yes yes yes yes 14

Battery

Battery Type Charge Time Standby Time Talk Time Optional Handset 2 x Ni-MH (AAA) 7 hours 180 hours 17 hours KX-TGA721

Base Unit

Ringer Tone Locator or Paging Yes paging
Total Recording Time about 20 min.
Dimensions Base Unit (mm)
Width Height Depth 122.0 54.0 137.0

Handset (mm)

Width Height Depth 48.0 155.0 32.0

Weight

Base Unit (g) Handset (g) 210.0 130.0