Panasonic KX-TS3282, size: 1.1 MB
Multi Line - With Speakerphone - With Caller ID - Panasonic
The Panasonic KX-TS3282 is the perfect phone system for the home or office. Boasting two-line operation, it features a handy intercom along with a hands-free speakerphone. Caller ID lets you see who called while you were out. Choose from a white or black finish. This high-quality item has been factory reconditioned.
Part Number: KXTS3282
[ Report abuse or wrong photo | Share your Panasonic KX-TS3282 photo ]
User reviews and opinions
|FireFerum||1:23am on Sunday, August 8th, 2010|
|Very satisfied with the quality, design and functional aspects of the phone. Easy to use with a lot of nice features. Great value for the money. A good buy that I would recommend without hesitation. Comes complete with all accessories, interconnects, etc.|
|ndlovu||6:44am on Friday, June 18th, 2010|
|These phones are a very good two line business phone. I bought these phones as re-furbished and they were brand new. Excellent quality phone. Sturdy and functions well. Would definitely recommend it.|
|GrahamET||4:11am on Thursday, June 17th, 2010|
|Or office ,I think the Panasonic KX TS3282B is best choose ,at first ,Panasonic KX TS3282B is the most famous name . This Panasonic phone was purchased to replace a defective phone that had essentially the same functions.|
|kashman5k||2:12am on Sunday, June 13th, 2010|
|The only negative comment I can make is that the display does not (not to my knowledge) have a lighted display. Under low light conditions. Good quality, serviceable 2-line phone handles business and personal phone lines. Comfortable Handset, Durable, Good Sound Quality, Nice Features|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). Use only a Panasonic Handset for the KX-TS3282B/KX-TS3282W. The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) After you connect the AC adaptor; the display shows Set clock (p. 15) for 60 seconds, and all of the extension indicators ash until you assign the extension number of your unit (p. 17). Even if you do not use the intercom, assign the number. Otherwise all of the extension indicators will continue ashing. If you plug the AC adaptor into the power outlet without installing batteries, ashes. After you install the batteries (p. 9), disappears. During a power failure, the batteries serve as the power source (p. 9). The unit will work as a standard telephone. You can make or answer an external call with the handset. (You cannot use the intercom.)
Connecting Telephone Line Cords
A maximum of eight KX-TS3282Bs/KX-TS3282Ws can be connected in parallel. You can also connect KX-T3281W. To use the intercom, you must connect the telephone line cord to the LINE1/2 telephone jack of the unit.
To connect the units to individual two-line telephone jacks
Parallel Connected Two-Line Telephone Jacks (RJ14C)
To another unit
4-Wire Telephone Line Cord with GREEN Plugs
Parallel connected two-line telephone jacks
You can connect up to 8 stations. If another model telephone is connected to the KX-TS3282B/KX-TS3282W e xcept for KX-T3281W, the line indicators of this unit will not function for that telephone. DSL Internet connection and KX-TS3282B/KX-TS3282W Intercom work at similar frequencies. Please contact Panasonic at 1-800-211-PANA(7262) for special wiring congurations. For assistance, please call: 1-800-211-PANA(7262)
If you re-connect the telephone line cord(s), conrm that all of the extension indicators light with the AC adaptor connected, then connect the telephone line cord(s). If all of the extension indicators do not ash, the extension number has been assigned to this unit and the number might be used for another unit on the same line. Erase the previously assigned number (p. 17), then connect the telephone line cord(s). Re-assign the number to the unit (p. 17).
To connect the units to a two-line telephone jack
If you provide only one two-line telephone jack for the units, continue to wire them using optional Panasonic T-adaptors KX-J66. To order, call the accessories telephone number on page 3.
Caller ID Service
This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling partys information will be displayed after the rst ring. The unit can record information of up to 50 different callers for both lines combined, including the time and date received, the called line, and the number of times called, in the Caller List. The Caller List information is sorted from the most recent to the oldest call. When the 51st call is received, the oldest call is deleted. Using the list, you can automatically call back a caller. You can store the callers names and numbers from the Caller List into the directory or the One-Touch Dialer memory. If you subscribe to both Caller ID and Call Waiting services, when a second call is received on the same line while talking, the new callers name and phone number will be displayed (p. 52).
How caller information is displayed when a call is received
The display shows the callers name, phone number and the called line after the rst ring. After you answer the call, the display will show the length of the call.
ROBINSON,TINA 1-000-222-3333 ---- Line1 -----
If both lines receive calls at the same time, each callers information will be displayed alternately. Caller information will not be displayed in the following cases: If the caller dialed from an area which does not provide a Caller ID service, the display will show Out of area. If the caller has requested not to display his/her information, the display will show Private caller. If a long distance call is identied, and the callers name and/or number cannot be received, the display will show Long distance. The name display service may not be available in some areas. For further information, please contact your telephone company. If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services.
Using the Caller List
If you have received new calls, the number of new calls will be displayed as shown on the right, while the unit is not in use (standby mode).
Ex. Received 10 new calls
Viewing the Caller List
Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. To check who has called, follow the steps below.
Press [ ] or [ ] to enter the Caller List.
For example, the display on the right will show. You can go to the directory list by pressing [ ] (p. 40).
Caller list 10 new calls =Directory
To search from the most recent call, press [ ]. To search from the oldest call, press [ ].
To scroll between callers, press [ ] or [ ].
To exit the Caller List, press [EXIT].
If No items stored is displayed, the Caller List is empty. If more than one call is received from the same caller, the time and date of the most recent call will be recorded. If you do not press any buttons for 60 seconds, the unit will exit the Caller List.
Ex. When you search from the most recent call:
Caller list 2 new calls =Directory
1 SMITH,JACK 1-222-333-4444 11:50AM 11/24
If there is no name information for a caller, the display will only show the phone number.
2 BROWN,NANCY 222-3333 10:50AM 11/23 X4
To return to the previous caller, press [ ]. To exit the Caller List, press [EXIT].
1 TURNER,CINDY 1-234-456-7890 10:00AM 11/22
Caller list 0 new call =Directory
Display meaning: X2X9: The number of times the same caller called (up to 9). After checking, X2 to X9 will be replaced with. : You have checked this caller information, answered the call or called back the caller. 1 , 2 : Indication of which line the caller information was received
Calling Back from the Caller List
Caller list 3 new calls =Directory TURNER,CYNDY 1 1-234-456-7890 10:50AM 11/23 X4
Scroll to the desired caller by pressing [ ] or [ ].
To exit the Caller List, press [EXIT].
Lift the handset or press 12:34PM 11/25  [SP-PHONE/HEADSET] or a line button.
The displayed phone number is dialed automatically. After a few seconds, the display will show the length of the call.
12:34PM 11/25 
In some cases, you may have to edit the number before dialing (p. 3335). (Ex. You may have to delete 1 and the area code.) If a phone number is not displayed in the caller information, you cannot call back that caller. If the line selection is Auto (p. 55), the indicated line will be selected by lifting the handset off the cradle or pressing [SP-PHONE/HEADSET], in step 3. If the indicated line is already being used, select the other line by pressing the line button.
Editing the Callers Phone Number
You can edit a phone number into one of 3 patterns [see below (a), (b) and (c) on this page] to call back or store it into the directory or the One-Touch Dialer memory (p. 36). The Caller ID Number Auto Edit Feature (p. 34, 35) This feature will allow the unit to edit a Caller ID number into one of 3 patterns you desired for you automatically in the Caller List. For details and activation please see pages 34 and 35.
PARKER,FRED 1 1-234-321-5555 10:50AM 11/23 X4
Press [FUNCTION/EDIT] to select a pattern.
Each time you press [FUNCTION/EDIT], the number is rearranged into one of 3 patterns. (a) Phone no. (7 digit pattern) (b) Area code Phone no. (10 digit pattern) (c) 1 Area code Phone no. (11 digit pattern) The order in which patterns (a)(c) are displayed depends on how the telephone number is displayed in step 2.
321-5555 ENTER=Save 234-321-5555 ENTER=Save 1-234-321-5555 ENTER=Save
After editing, you can continue with calling back or storing procedures. To call back, lift the handset or press [SP-PHONE/HEADSET] or a line button (p. 32). To store the number in the directory or One-Touch Dialer memory, press [ENTER]. Then follow the instructions on the display (see page 36, from step 4).
Caller list 3 new calls =Directory
Basic Operation 33
The Caller ID Number Auto Edit Feature
There are 3 patterns of phone number [(a), (b), and (c), p. 33]. This feature allows your phone to automatically edit an in-coming Caller ID number into one pattern you preferred, and display the Caller ID number with that pattern automatically. After this feature is activated, Caller ID numbers coming from considered area codes (201, for example), from which the Caller ID numbers have been chosen to follow the desired pattern (7 digit pattern, for example), will be automatically edited from other patterns (11 digit pattern, for example) into the same pattern you have previously selected (which is 7 digit pattern, in the example). Up to 4 area codes are allowed for this feature for pattern (a), (b) and (c) (p. 33). To activate this feature, you must (1) set this feature to on, and (2) make an out-going call from Caller List (p. 33) with a number which has one of 3 patterns that you have edited with considered area code, and that you prefer to be followed by future Caller ID numbers, so that in the future all the Caller ID numbers coming from the same area code will be displayed in the same pattern. The Caller ID number Auto Edit feature is preset to ON at factory.
If you fail to reach your destination when making the call, the phone number you dialed might have an incorrect pattern, please edit the phone number with another pattern (p. 33).
For example, if you move to another area, you may need to turn this feature to OFF to erase previously edited area codes. Then, if still needed, you may activate this feature again.
Scroll to Caller ID edit by pressing [ ] or [ ].
Line setting Caller ID edit Set clock Auto edit :On ENTER=Save
Enter phone no.
Selecting characters to enter names
The dialing buttons ( to ) can be used to enter letters and symbols. Pressing each button selects a character as shown below.
Number of times key is pressed Keys 1 # a d g j m p t w & b e h k n q u x 3 c f i l o r v y 4 ( A D G J M s T z 5 ) B E H K N P U W C F I L O Q V X , 6 R 8 Y Z 9 S 9. 10 / 11 1
          [ ] [ ]
Moves the cursor to the left. Moves the cursor to the right. (To enter another character using the same number key, move the cursor to the next space.)
If you make a mistake while entering a name: Use [ ] or [ ] to move the cursor to the incorrect character, press [CLEAR] to delete and enter the correct character. Each time you press [CLEAR], a character is erased. To erase all characters, press and hold [CLEAR]. For example, to enter Tom Jones:
Press  four times. Press  three times, then press [ ].
T To Tom Tom Jo Tom Jones
Press  once, then press [ ] twice. Press  four times, press  three times, then press [ ]. Press  twice, press  twice, then press  four times.
Finding Stored Items
You can go to the Caller List by pressing [ ] (p. 30).
Scroll to the desired item by pressing [ ] or [ ].
All directory items are stored in the order shown on the right.
Press [ ] or [ ] to enter the directory list.
Directory list =Caller list
Alphabet letter Symbol (excluding # and ) Number # and Telephone number (When no name is stored)
To search for a name by initial: (1) Press the dialing button for the rst letter of the desired name until any name with the same initial is displayed (see the Index table below). Ex. To nd Frank, press  repeatedly until the rst item under F is displayed. (2) Press [ ] repeatedly until the name is displayed.
You can exit the directory list any time by pressing [EXIT]. If No items stored is displayed in step 1, the directory is empty. To exit the directory list, press [EXIT]. If you do not press any buttons for 60 seconds, the unit will exit the directory list.
You can handle two external calls, or an external call and an intercom call simultaneously.
Making/answering another external call during a conversation
If you hear two tones during a conversation and another line indicator light ashes quickly, an incoming call is being received. You can answer the second call while holding the rst call. If you subscribe to a Caller ID service, the second callers information will be displayed when a call is being received on the other line (p. 29). You can delete the two tones (incoming call tone). See page 54. Ex. If you are using LINE1
Press [HOLD] to put the rst call (LINE 1) on hold.
The LINE 1 indicator light ashes.
Press the other line button ([LINE 2/DATA]) to make or answer a second call.
The LINE 2 indicator lights.
To return to the rst call (LINE 1), press the line button for the rst call ([LINE 1]).
The second call is terminated.
To hold the second call in step 3, press [HOLD] before pressing the line button for the rst call.
Making an intercom call during a conversation
Press [HOLD] to put the external call on hold.
To page all extensions, press [INTERCOM] then [PAGE].
After the paged extension answers, talk into the MIC or handset. To return to the external call, press the line button.
The line indicator stops ashing and remains lit. The intercom call is terminated.
To hold the intercom call in step 4, press [HOLD] then the line button.
Conference with two external calls
While having a conversation on one line, you can make or answer a second call on the other line and then combine the calls to make a conference call.
During a call, press [HOLD] to put the rst call on hold. Press the other line button to make or answer a second call. When the second call is connected, Conference press [CONF] to make a conference call.
To hang up both lines, place the handset on the cradle or press [SP-PHONE/HEADSET]. To hang up only one line, press the line button for the party with which you want to continue talking. To put both lines on hold, press [HOLD]. To talk with only one caller, press the relevant line button. To resume both lines press [CONF].
You cannot call another extension to make a conference call.
Conference with an external call and an internal call
While you are talking with an outside caller, you can call another extension to make a conference call.
During a call, press [HOLD].
The call is put on hold.
To page another extension, press an extension button ([EXT1] to [EXT8]). When the paged party answers, press [CONF] on your unit to make a conference call.
To hang up both the external and internal calls, place the handset on the cradle or press [SP-PHONE/HEADSET]. To hang up only the intercom call, press the line button. To hang up only the external call, press [INTERCOM].
You can place the conference call on hold in step 3. Press [HOLD]. To resume the conference call, press [CONF] on your unit. For assistance, please call: 1-800-211-PANA(7262)
How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press [PAUSE] if a pause is required for dialing with a PBX or to make a long distance call. Ex. Line access number  (PBX) Phone number  [PAUSE]
Pressing [PAUSE] once creates a 3.5 second pause. This prevents misdialing when you redial or dial a stored number. Pressing [PAUSE] more than once increases the length of the pause between numbers.
Muting Your Conversation
Press [MUTE] while talking.
and [Mute] are displayed. The other party cannot hear you but you can hear them. To release the mute, press [MUTE] again. When you switch between the handset and speaker, the mute will be released.
For Call Waiting Service Users
If another call is received on the same line while talking, you will hear a callwaiting tone. Press [FLASH] to answer the second call.
The rst call is put on hold. To return to the rst caller, press [FLASH] again. The call waiting service cannot be used when: the rst call on the same line is put on hold, you are having a conference call on both lines (p. 51), another extension is joining your conversation, or a parallel connected telephone other than KX-TS3282B, KX-TS3282W or KX-T3281W is in use. If this function does not operate properly, consult your telephone company for details.
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature allows the unit to display the second callers information. After you hear a call-waiting tone while talking, the display will show the callers name, the phone number, the called line and Waiting.
BROWN,NANCY 1-555-666-7777 -- L1 Waiting --
Please contact your telephone company for details and availability in your area.
Temporary Tone Dialing (For Rotary or Pulse Service Users)
R Press [R] (TONE) before entering access numbers which require tone dialing.
The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse.
Pressing [FLASH] allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting.
Pressing [FLASH] causes to disable the Temporary Tone Dialing mode or the mute (p. 52).
Selecting the ash time
The ash time depends on your telephone exchange or host PBX. You can select the following ash times: 80, 90, 100, 110, 200, 250, 300, 400, 600, 700 ms (milliseconds). Your phone comes from the factory set to 600 ms. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.
Scroll to Dial setting by pressing [ ] or [ ], and press [ ]. Scroll to Set flash time by pressing [ ] or [ ]. Press [ ].
Change password Dial setting Line setting Set dial mode Set flash time Call restrict Flash time Line1 Line2 600ms 600ms
Select the desired time by pressing [ ] or [ ] for each line. To move to the other line, press [ ] or [ ].
You can exit the programming mode any time by pressing [EXIT]. If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not work correctly. Consult your PBX supplier for the correct setting. For assistance, please call: 1-800-211-PANA(7262)
Incoming Call Tone
During a conversation, you can be informed if another call arrives on another line (Line 1 or 2 or Intercom line). If you set to ON, this incoming call tone will be heard for as long as the external or internal line rings. To delete the incoming call tone, set to OFF. To set the incoming call tone to sound twice, set to 2. Your phone comes from the factory set to 2. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.
LCD contrast Ringer setting Change password Ringer volume Ringer pattern
Scroll to Incoming call by pressing [ ] or [ ]. Press [ ].
Ringer pattern Incoming call Incoming call tone:2 ENTER=Save
Select On, Off or 2 by pressing [ ] or [ ]. Press [ENTER] (Save key).
The unit will automatically select a free external line when you make a call by lifting the handset or pressing [SP-PHONE/HEADSET]. The unit will also select the in-coming called line when you answer the in-coming call. You can change the line selection. There are four options as following: Line 1: Line 1 will be selected. Line 2: Line 2 will be selected. Intercom: Intercom line will be selected. Auto (factory preset): A free external line will be selected (Line1 has priority) when making a call by lifting the handset or pressing [SP-PHONE/ HEADSET]. However, when you call back from the Caller List (p. 32), the line that is indicated will be selected. You can also select any line by pressing a line button. When a call is being received, the called line is selected when you lift the handset or press [SP-PHONE/HEADSET]. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.
Scroll to Line setting by pressing [ ] or [ ]. Press [ ].
Dial setting Line setting Caller ID edit Line selection Call barge in Line selection :Auto ENTER=Save
Press [ ] at Line selection.
Select the desired line selection, Line1, Line2, Intercom or Auto by pressing [ ] or [ ]. Press [ENTER] (Save key).
Setting the Password
You can change the password for the dial lock (p. 57) and call restriction (p. 58). The factory preset password is 1111.
To set the password
Scroll to Change password by pressing [ ] or [ ]. Press [ ].
Ringer setting Change password Dial setting
Enter the current password.
The factory preset is 1111.
If 3 beeps are heard, you entered a wrong password. Enter the correct one.
Enter a new password using a 4-digit number. (Ex. 1234 is entered.) Press [ENTER] (Save key).
You can exit the programming mode any time by pressing [EXIT]. Once you have set a PIN code, you cannot conrm it. If you forget your PIN code, please call: 1-800-211-PANA(7262).
Current password : =Next Current password :oooo =Next Enter password : ENTER=Save Enter password :1234 ENTER=Save
Except for the numbers stored in the one-touch auto dial buttons (p. 44), you can prevent others from making a call to any number. Only incoming calls are accepted until the dial lock is canceled.
Before using this feature, we recommend storing emergency numbers in the memory of one-touch auto dial buttons (p. 44). Even if the dialing buttons are locked, the numbers stored in these buttons can be dialed.
To set the dial lock
Press [DIAL LOCK].
ashes on the display.
Enter password :---ENTER=Save Enter password :oooo ENTER=Save
Enter the password (p. 56).
A beep sounds and stops ashing and remains on the display. If 3 beeps are heard, you entered a wrong password. Enter the correct one.
You can exit the programming mode any time by pressing [EXIT]. is displayed when the mode is on. If the dial buttons are pressed after lifting the handset or pressing [SP-PHONE/HEADSET] or a line button, DIAL LOCKED will be displayed for a few seconds. While the dialing buttons are locked, you cannot store phone numbers in the memory of one-touch auto dial buttons.
To cancel the dial lock
Repeat steps 1 to 3 above.
will disappear on the display.
You can prevent the unit from dialing phone numbers beginning with specied digit(s) (1 digit or 2 digits). Except for the numbers stored in the memory of one-touch auto dial buttons (p. 44), phone numbers with the restricted leading digits cannot be dialed out.
Before using this feature, we recommend storing emergency numbers in the memory of one-touch auto dial buttons (p. 44). Even if the phone numbers are restricted, the numbers stored in these buttons can be dialed.
To set the call restriction
Scroll to Dial setting by pressing [ ] or [ ]. Press [ ].
Change password Dial setting Line setting Set dial mode Set flash time Set flash time Call restrict Restrict no. :-ENTER=Save
Scroll to Call restrict by pressing [ ] or [ ]. Press [ ].
If you changed the password from 1111 (factory preset) to another one, Enter password is displayed. Enter the password (p. 56), and press [ ] (Next key).
Enter password :---=Next Enter password :oooo =Next
Enter the rst number(s) (1 digit or 2 digits) you want to restrict ( to ).
If you enter a wrong number, press [CLEAR] and enter the correct one.
Ex. 9 is entered.
Restrict no. :-9 ENTER=Save
You can exit the programming mode any time by pressing [EXIT]. While you restrict phone numbers beginning with specied digit(s), you cannot store phone numbers in the memory of one-touch auto dial buttons. When dialing a phone number with the restricted leading digit(s), CALL RESTRICTED is displayed.
To cancel the call restriction
Repeat steps 1 to 5 on page 58. Then press [CLEAR] to clear the restricted digits, and press [ENTER] (Save key).
Call Privacy Feature
The Call Privacy feature allows you to prevent other extensions from joining your conversation with an outside party. If you allow other extensions to join your conversation (Call Barge In feature), select Accept. Your phone comes from the factory set to Reject. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.
Dial setting Line setting Caller ID edit Line selection Call barge in Line selection Call barge in Call barge in :Reject ENTER=Save
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briey explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment is hearing aid compatible as dened by the FCC in 47 CFR Section 68.316. Environment do not place the unit in a room where the temperature is less than 5C (41F) or greater than 40C (104F). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunlight. Routine care wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. When you leave the unit unused for a long period of time, unplug the AC adaptor from the outlet. If there is any trouble disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by a Factory Servicenter or other Authorized Servicer. If the known working phone does not operate properly, consult your telephone company.
During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. You must mail-in your product during the warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold as is.
For assistance in the continental U.S.A. in obtaining repairs please ship the product to: Panasonic Services Company Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)768-2910. When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modication, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specic legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory
For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; SaturdaySunday 9 am-7 pm, EST. or send e-mail : email@example.com
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Web Site: http://www.panasonic.com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site. Accessory Purchases: 1-800-332-5368 (Customer Orders Only) For hearing or speech impaired TTY users, TTY : 1-866-605-1277 Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST) (Visa, MasterCard, Discover Card, American Express, Check) Service in Puerto Rico Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter: Ave. 65 de Infantera, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Phone (787)750-4300 Fax (787)768-2910
Power Supply: AC adaptor (120 V AC, 60 Hz) Three AA size Manganese (R6, UM-3) batteries (for a power failure, p. 9) Standby: Approx. 1 W Maximum: Approx. 1.5 W
Dimensions (H x W x D): Approx. 96 mm x 186 mm x 231 mm (325/32" x 75/16" x 91/16") Mass (Weight): Dialing Mode: Approx. 890 g (1.94 lb.) Tone (DTMF)/Pulse
Operating Environment: 5 C 40 C (41 F104 F)
Specications are subject to change without notice.
For product service
Call 1-800-211-PANA(7262) for the location of an authorized servicenter. Panasonics e-mail address for customer inquiries: firstname.lastname@example.org for customers in the USA or Puerto Rico ONLY
When you ship the product
Carefully pack your unit, preferably in the original carton. Attach a letter, detailing the symptom, to the outside of the carton. Symptom
Send the unit to an authorized servicenter, prepaid and adequately insured. Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales ofces. These locations do not repair consumer products.
If you need assistance with the set-up or operation, please call 1-800-211-PANA(7262)
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantera, Km. 9.5, San Gabriel Industrial Park Carolina, Puerto Rico 00985 PQQX13437XA-BM S0902-3023
HDC-500 PSR-500M Tough 8000 Dect2112S Asus M6 Dmrex795 KDC-W4531 YH-925 Joybook 5000 DE-10 WF7704NAW VGN-FE31Z CH1HR-2ABP Anti-executable Message DR-140 Ideacentre A600 Point Dmrxs350 RAS18CH1 320 GB Mw10C Acer G24 Xbox360PC 2 Gold IRC3580 Panasonic P50 DP-23F Espio 95S TFT7210R 4802CF FAX-1010 HT-SL800W L203WT-BF GC2530 LE46C550 BL-C11 Creatis MD-105FX JD-V33CL K310A CDP-970 SA-WX900 SA-7800 ST-SE200 DRW-1604P DWL-3260AP VGN-FW Gpsmap 62 Fbii XL-5 GT-12 2 Plus DVD-S97EB LAC-M8410 RA122H PPM42S3Q AX4gpro PC-D340 RA200 Quikstart W 700V Fostex PD6 M3N HW 9-5 2000 VPC-CA100 EMP-TW1000 SA-XR25 HZ30W CDM-7872RB CCD-TRV52 Storm Starlette 10 WG311T QW14790 LN40A450c1 ECO-drive STI64XF1 EWI1235 Brain DVD 300 LDF6920ST KV-14LT1K RD-700GX Xtc 1500 Instruction Lexmark Z645 Oxygen 8 DTB-9500F Legend 3000 30PF9946D-37B Spotmatic F HUZ5C Basspro ZOB580X RMT-dslr1 A-3300S SF-650 CRC400E LQ-1070 BD-S2900 Review
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101