Reviews & Opinions
Independent and trusted. Read before buy Panasonic Lumix DMC-LS1!

Panasonic Lumix DMC-LS1

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic Lumix DMC-LS1 Digital Camera, size: 6.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic Lumix DMC-LS1Patriot SD Card 2GB Memory for Panasonic Lumix Camera DMC-LS1


Details
Brand: Patriot
Part Number: SD-2GB-5342


Here you can find all about Panasonic Lumix DMC-LS1, for example manual and review. You can also write a review.

 

[ Report abuse or wrong photo | Share your Panasonic Lumix DMC-LS1 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
amadou 8:18pm on Saturday, October 16th, 2010 
The images produced by this camera are good in all usual areas of concern like exposure, color, noise.
jasperlotus 6:47pm on Tuesday, September 21st, 2010 
A fine camera. This camera is simple to use. Anti-shake system works well and gives good result.
bitfuzzy 1:26pm on Monday, August 16th, 2010 
Great Batteries These came with my Sony digital camera. They last forever! I bought two more packs to have a spare with my camera and one for my gps. not the battery i needed amazon paired this up with the camera i bought but they do not go together so i wasted whatever dough it cost.
#georgetta_80 10:47pm on Thursday, August 5th, 2010 
I received this digital camera as a gift at Christmas, and so far I am extremely impressed. This digital SLR is a very good starter camera and could easily be used in a semi professional context if paired with a good lens.
matva88 3:44pm on Tuesday, June 15th, 2010 
I previously owned a big Panasonic brick digital camera and when that gave up I got this camera. I was given it as a present. This is a great little camera definitely one of the best models in its price range.
lee Chase 2:51am on Sunday, May 9th, 2010 
Neat and easy to use - top marks! January 06A bit late I know, but this is my first first digital camera. It came with AA batteries, strap.
bmackenz1 12:18am on Monday, May 3rd, 2010 
Excellent point and shoot camera. Largeish LCD and easy to remove text when required to see image detail. Image adjustments easily made. Brought this camera for my wife since I own a Fuji s9500. After taking a few shots, I was very impressed.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

If you will not be using the camera for a long time Store the batteries in a cool and dry place with a relatively stable temperature. (Recommended temperature: 15oC 25oC (59oF 77oF), Recommended humidity: 40% 60%) Be sure to remove the batteries and the card from the camera. When the batteries are left inserted in the camera, the batteries are discharged since a weak electric current is passed even if the camera is turned off. (Refer to P15 for Ni-MH batteries.) When you keep the camera in a closet or a cabinet, we recommend storing it with the desiccant (silica gel).
About These Operating Instructions
Please note that the description on this page is a sample and all pages are not described in this manner.
Compensating the Exposure

SCN1 SCN2

Use this function when you cannot achieve appropriate exposure due to the difference of brightness between the subject and the background.
EV is an abbreviation of Exposure Value, and it is the amount of light given to the CCD by the aperture value and the shutter speed.
Modes indicated here allow you to use the functions or settings described on this page. Set the Mode dial to any of the modes to use the functions or settings.
2 Convenient or helpful information for use of the camera is described. About illustrations in these operating instructions Please note that the appearance of the product, the illustration or the menu screen are a little different from those in actual use. About illustrations of the cursor button In these operating instructions, the operations on the cursor button are described as illustrated below.
e.g.: When you press the 4 button

Contents

Information for Your Safety.. 2 About These Operating Instructions. 6

Playback (basic)

Playing Back Pictures.. Pictures Multi Playback. 50 Using the Playback Zoom..51 Deleting Pictures.. 52

Preparation

Standard Accessories. 9 Names of the Components. 10 Quick Guide.. 12 About the Batteries.. 13 Inserting/Removing the Batteries. 18 Inserting/Removing the Card (Optional).. 19 About the Built-in Memory/the Card. 20 Approximate number of recordable pictures and the size.. 22 Setting Date/Time (Clock Set). 23 About the Setup Menu.. 24 About the LCD Monitor.. 28
Recording pictures (advanced)
Using the Mode Dial. 54 Economy mode.. 54 Macro mode.. 54 Motion image mode. 55 Scene mode.. 57 Portrait mode.. 58 Sports mode.. 58 Scenery mode. 59 Night scenery mode.. 59 Night portrait mode. 60 Fireworks mode.. 60 Party mode. 61 Snow mode. 61
Recording pictures (basic)
Taking Pictures.. 30 Taking Pictures in Simple Mode. 35 Checking the Recorded Picture (Review)... 38 Using the Optical Zoom. 39 Taking Pictures using the Built-in Flash. 40 Taking Pictures with the Self-timer. 43 Compensating the Exposure. 44 Taking Pictures using Auto Bracket. 45 Optical Image Stabilizer. 46 Taking Pictures using Burst Mode.. 47

Recording Menu Settings

Using the [REC] mode menu. 62 White Balance [W.BALANCE].. 63 ISO Sensitivity [SENSITIVITY]. 65 Picture Size [PICT.SIZE]. 65 Quality [QUALITY].. 66 AF Mode [AF MODE]. 66 Slow Shutter [SLOW SHUTTER]. 67 Digital Zoom [D.ZOOM].. 68 Color Effect [COL.EFFECT]. 68 Picture Adjustment [PICT.ADJ.]. 68

Playback (advanced)

Playing Back Motion Images. 69 Using the [PLAY] mode menu. 70 Displaying pictures in a direction at the time of recording [ROTATE DISP.].. 71 Rotating the Picture [ROTATE]. 71 Setting the Picture to be Printed and the Number of Prints [DPOF PRINT].. 72 Preventing Accidental Erasure of the Picture [PROTECT]. 74 Playing Back with Slide Show [SLIDE SHOW].. 75 Resizing the Pictures [RESIZE]. 76 Trimming the Pictures [TRIMMING].. 77 Copying Picture Data [COPY].. 79 Initializing the Built-in Memory/ the Card [FORMAT].. 80 Playing Back Pictures on a TV Screen. 82

Others

Screen Display.. 90 Cautions for Use.. 93 Message Display. 95 Troubleshooting.. 97 Specifications.. 100 Digital Camera Accessory System. 102 Digital Camera Accessory Order Form (For USA Customers). 103 Request for Service Notice (For USA Only).. 104 Limited Warranty (For USA Only). 105 Customer Services Directory (For USA Only).. 107 Index... 108 Spanish Quick Use Guide/ Gua rpida en espaol. 110
Connecting to a PC or Printer
Before Connecting to the PC or the Printer [USB MODE].. 83 Connecting to a PC.. 84 Connecting to a PictBridge-compliant Printer.. 86

Standard Accessories

Before using your camera, check the contents.
1 Batteries AA Oxyride batteries (ZR6) 2 USB Connection Cable 3 Video Cable 4 CD-ROM 5 Strap

K1HA08CD0004

SD Memory Card is optional. When you do not use the card, you can record or play back pictures on the built-in memory. (P20) If any of the accessories are lost, please contact Panasonics parts department at 833-9626 (For USA) or in Canada call 561-5505 for more details on how to obtain replacement parts.

K1HA08CD0006

VFC4090

Names of the Components

1 Lens (P4) 2 Self-timer Indicator (P43) 3 Flash (P40)

Inserting/Removing the Card (Optional)
Check that the camera is turned off and that the lens is retracted. Prepare SD Memory Card (optional) or MultiMediaCard (optional). When you do not use the card, you can record or play back pictures on the built-in memory. (P20)
1 Slide the card door to open it.
Check the direction of the card. Do not touch the connection terminals on the back side of the card. The card may be damaged if it is not fully inserted. The card and the data may be damaged if it is inserted or removed while the camera is on. We recommend using Panasonics SD Memory Card. (Use only the genuine SD card with SD Logo.)
Close the card door. 2 Slide the card door to the end and then close it firmly.
2 Insert: Insert the card fully until it clicks and it is locked with the label facing the back of the camera. Remove: Push the card until it clicks, then pull the card out upright.
If the card door cannot be completely closed, remove the card and insert it again.
About the Built-in Memory/the Card
Built-in Memory [ ] When you do not use the card, you can record or play back pictures on the built-in memory. (The capacity of the built-in memory is about 14 MB.) Card [ ] When you use the card, you can record or play back pictures on it. (The built-in memory cannot be used when the card is inserted.) Icons displayed on the screen:

SD Memory Card

On this unit, you can use SD Memory Cards of the following capacity (from 8 MB to 1 GB). 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB (Maximum) Please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This Site is English only.) This unit supports SD Memory Cards formatted in FAT12 system and FAT16 system based on SD Memory Card Specifications.
A: When the built-in memory is used B: When the card is used Picture data recorded onto the built-in memory or the card can be copied from the built-in memory to the card and vice versa. (P79) SD Memory Card (optional) and MultiMediaCard (optional) The SD Memory Card and MultiMediaCard are small, lightweight, removable external cards. The reading/writing speed of an SD Memory Card is fast. The SD Memory Card is equipped with a Write-Protect switch A that can inhibit writing and formatting a card. (When the switch is slid to the [LOCK] side, it is not possible to write or delete data on the card and format it. When the switch is unlocked, these functions become available.)

Checking the Recorded Picture (Review)

1 Press 4.

REVIEW1X
When you change the magnification or the position to be displayed, the zoom position indication A appears for about 1 second to check the enlarged area. Recorded pictures can be deleted during the review (Quick Deletion)
DELETE SINGLE DELETE THIS PICTURE?

DELETE SELECT SET

NO YES

MULTI/ALL

The last recorded picture appears for about 10 seconds. Press the shutter button halfway or 4 to cancel the review. You can check other pictures by pressing 2/1. When the recorded pictures are too bright or dim, compensate the exposure. (P44)
Once deleted, pictures cannot be recovered. Multi pictures or all pictures can be deleted. Read P52 or P53 to operate them.
2 Enlarge and shift the picture.

REVIEW4X

DELETE
: 1k>4k>8k : 8k>4k>1k

Using the Optical Zoom

You can make people and subjects appear closer with the 3 times optical zoom, and landscapes can be recorded in wide angle.
To make subjects appear further away use (Wide)
The optical zoom is set to Wide (1k) when the camera is turned on. The picture may have some distortion (typical example: vertical straight line bent outwards). This is due to the lens aberration, which is common to some extent with all photographic lenses. Distortion may be more visible when using a wider area of the zoom lens as you get closer to the subject. When using the zoom lens at high magnification, the quality of the picture can be enhanced if a tripod is used. At high magnification, even small movements can cause a slight decrease in picture sharpness. If you use the zoom function after focusing on the subject, focus on the subject again. When you record motion images, the zoom magnification is fixed to the value set at the start of recording. The lens is ejected or retracted according to the zoom position. Take care not to interrupt the motion of the lens while the zoom lever is rotated.
To make subjects appear closer use (Tele)
Taking Pictures using the Built-in Flash

The available flash range is an approximation. Refer to P33 for the focus range. Refer to P65 for the ISO sensitivity. If the ISO sensitivity is set to [AUTO], it is automatically adjusted from [ISO100] to [ISO400] when you use the flash. To avoid noise, we recommend decreasing the ISO sensitivity (P65) or setting [PICT.ADJ.] to [NATURAL]. (P68)
Shutter speed for each flash setting Flash setting : AUTO : AUTO/Red-eye reduction : Forced ON : Forced ON/Red-eye reduction : Slow sync./Red-eye reduction Shutter speed (Sec.) 1/60 1/2000 1/60 1/2000 1/60 1/2000 1/8 1/2000 1/8 1/2000 : Forced OFF 8 1/2000 (In [NIGHT SCENERY] in scene mode)
The shutter speed changes depending on the slow shutter setting. (P67) Do not stare at the photo flash from close proximity. If you bring the flash too close to the subjects, they may be distorted or discolored by its heat and lighting. Do not cover the photo flash with your fingers or any other items. While the flash is charged, the LCD monitor turns off and you cannot take pictures. The status indicator lights. [Except when the AC adaptor (DMW-AC1; optional) is used.] If the remaining battery power is low, the LCD monitor may be turned off for longer time. When you take a picture beyond the flash control range, the exposure may not be adjusted properly and the picture may become bright or dark. When you repeat taking a picture, recording may be disabled even if the flash is activated. Take a picture after the access indication disappears. When the jitter alert appears, we recommend using the flash. When you set to burst mode or auto bracket, only 1 picture is recorded for every flash activated. The flash icon turns red when activating the flash and pressing the shutter button halfway. When taking a picture with the flash, the white balance will be automatically adjusted [except for [ ] (Daylight)], but the white balance may not be properly adjusted if the flash level is insufficient. When the shutter speed is fast, the flash effect may not be sufficient.
Taking Pictures with the Self-timer
1 Select the self-timer mode.
The self-timer indicator A blinks and the shutter is activated after 10 seconds (or 2 seconds). If you press the [MENU] button when the self-timer is set, the self-timer setting is canceled.
: Self-timer set to 10 seconds ; : Self-timer set to 2 seconds ; No display: canceled

2 Take the picture.

When using a tripod or in other cases, setting the self-timer to 2 seconds is a convenient way to avoid the jitter caused by pressing the shutter button. When you press the shutter button fully with one stroke, the subject is automatically focused just before the recording. In simple mode [ ], the self-timer is fixed to 10 seconds. (P35) When you set the self-timer in the burst mode, the camera starts taking a picture 2 or 10 seconds after the shutter button is pressed. The number of pictures taken at a time is fixed to 3. We recommend using a tripod when recording with the self-timer. (When you use a tripod, make sure the tripod is stable with the camera attached to it.)

Hold down the shutter button fully to activate the burst mode. When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3. If the flash is activated, you can record only 1 picture. When setting auto bracket and the burst mode simultaneously, auto bracket will be performed. The ways to control the exposure and the white balance vary depending on the burst mode setting. When the burst mode is set to [ ] or [ ], they are fixed to the values set for the first picture. (The burst speed is prioritized.) When the burst speed is set to [ ], they are adjusted each time you take a picture. When setting the burst mode, the auto review function is activated regardless of the setting on the auto review function. (The picture is not enlarged.) Moreover, the settings for the auto review function on the [SETUP] menu are disabled. Burst mode is not canceled when the camera is switched off. Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card.

Playing Back Pictures

When a card is not inserted, the picture data in the built-in memory appear. When a card is inserted, the picture data in the card appear. (P20) When you keep pressing 2/1, the number of files forwarded/rewound at a time is increased. If you release 2/1 and press them again, the files will be forwarded/rewound one by one. In review playback in the recording mode or multi playback, the picture can only be forwarded or rewound one by one. When you forward or rewind a large number of pictures, release 2/1 once before reaching the picture to be played back, then press 2/1 to forward/rewind pictures little by little.

1 Select the picture.

2: Play back the previous picture. 1: Play back the next picture. The last recorded picture will be played back first. When [ROTATE DISP.] (P71) is set to [ON], pictures recorded by holding the camera vertically are played back vertically.
Fast forwarding/Fast rewinding When you keep pressing 2/1 during playback, the file number and the page number are updated. If you release 2/1 when the number of the desired picture appears, you can play back the picture. 1: Fast forward 2: Fast rewind

This mode allows you to take close-up pictures of the subject, e.g. When taking pictures of flowers. You can take pictures approaching the subject at a distance up to 5 cm (0.16 feet) from the lens by rotating the zoom lever upmost to Wide (1k). Focus range

30 cm (0.98 feet)

5 cm (0.16 feet)
The economy mode is not activated in the following cases (The power save mode is activated.): While the menu screen is displayed While the self-timer is set When you use the AC adaptor (DMW-AC1; optional), the power save mode is not activated.
We recommend using a tripod. When the subject is close to the camera, the effective focus range (depth of field) is much narrowed. Therefore, you will have difficulty in focusing on the subject if the distance between the camera and the subject is changed after the subject is focused. When the camera lens is at a distance beyond the available range from the subject, the subject may not be focused even if the focus indication lights. The available flash range is about 30 cm (0.98 feet) 4.2 m (13.8 feet) (Wide). (This is applied when you set the ISO sensitivity to [AUTO].) When you take pictures at close range in macro mode, the resolution of the peripheral of the picture may be slightly decreased. However, this is not a malfunction.

Motion image mode

2 Press the shutter button halfway.
This mode allows you to record motion images.

1 Select [MOTION RATE].

REC W.BALANCE MOTION RATE AF MODE D.ZOOM COL.EFFECT SELECT

AUTO 10fps 30fps OFF OFF

When the subject is focused, the focus indication A lights.
3 Press the shutter button fully to start the recording.
[10fps]: Recording motion images for a longer time is available though the quality will be less than the quality recorded at [30fps]. The file size is smaller, so the files are suitable to be attached to e-mails. [30fps]: The motion of the recorded image is smooth, but the file size is large. fps (frame per second); This refers to the number of frames used in 1 second. Close the menu by pressing the shutter button halfway or the [MENU] button after finishing the setting.
The remaining recording time (approximation) appears on the screen. By pressing the shutter button fully again, the recording stops. If the built-in memory or the card becomes full during recording, the camera stops recording automatically.

5-area-focusing: The camera focuses on any of 5 focus areas. You can record a picture in free composition without limiting the position of the subject.
3-area-focusing: The camera focuses on any of the left, center and right of the screen. This mode allows you to focus on the subject faster than any other modes in AF mode.
1-area-focusing: The camera focuses on the subject in AF area on the center of the screen.
Spot-focusing: The camera focuses on the limited and narrow area in the screen.
When setting to 3-area-focusing, pictures may become still while being focused on, however, this is not a malfunction. When using the digital zoom or when you take pictures in dark places, the AF area is displayed on the center of the screen with a size wider than usual.
Slow Shutter [SLOW SHUTTER]
The shutter speed can be automatically adjusted. However, if you want brighter pictures, you can manually select a slower shutter speed. This is especially effective if you want to take pictures where both the night landscape and the subject are bright, using [NIGHT PORTRAIT] in scene mode. (P57) The slow shutter speed values you can select are: [1/8 ], [1/4 ], [1/2 ] and [1 ]. Slow shutter setting Brightness Jitter Example 1/8 Darker Less 1 Brighter More
When multiple AF areas (max. 5 areas) light at the same time, the camera is focusing on all the AF areas. The focus position is not predetermined because it is set to the position that the camera automatically determines at the time of focusing. If you want to determine the focus position to take pictures, switch the AF mode to 1-area-focusing mode.
Usually, set to [1/8 ] to take pictures. (When you select slow shutter speed values other than [1/8 ], [ ] appears on the lower left of the LCD monitor.) When you set shutter speed slower on [SLOW SHUTTER], we recommend using a tripod because jitters become easier to occur. You cannot set the slow shutter in [NIGHT SCENERY] and [FIREWORKS] in scene mode. (P57)

Digital Zoom [D.ZOOM]

Color Effect [COL.EFFECT]
It is possible to further magnify a subject already magnified 3 times with the optical zoom 4 more times with the digital zoom, thereby reaching a maximum of 12 times. Entering the digital zoom range When you rotate the zoom lever to the extreme Tele position, the on-screen zoom indication may momentarily pause. This is not a malfunction. You can enter the digital zoom range by continuously rotating the zoom lever to Tele or releasing the zoom lever once and then rotate it to Tele again.

Playing Back Pictures on a TV Screen
Playing back pictures with video cable (supplied) Turn the camera and the TV off.
3 Turn the TV on and select external input. 4 Turn the camera on and then set the mode dial to playback mode [ ].

DIGITAL

V.OUT DC IN 3V
Viewing pictures in other countries When setting [VIDEO OUT] on the [SETUP] menu, you can view images on the TV in other countries (regions) which use the NTSC or PAL system. Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC in the recording mode. Playback pictures on TV with SD Memory Card slot A recorded SD Memory Card can be played back on TVs with an SD Memory Card slot. If you play back pictures recorded using [HDTV] mode on a High-Definition TV, (HDTV has 16:9 aspect) the picture quality will be better. (MultiMediaCard may not be played back on TV with SD Memory Card slot.)
1 Connect the video cable A (supplied) to the [V.OUT] socket of the camera.
Connect the video cable with the [ ] mark facing the [1] mark on the [V.OUT] socket. Hold the plug B to push into or pull out.
2 Connect the video cable to the video input socket of the TV.
1 Yellow: to the video input socket
Do not use any other video cables except the supplied one. Read the TV operating instructions too.
Before Connecting to the PC or the Printer

[ : USB MODE]

Select the USB communication system before connecting the camera to your PC or your printer with the USB connection cable (supplied). Set the items on [USB MODE] in the [SETUP] menu. (P24)

1 Select [USB MODE].

SETUP CLOCK SET NO.RESET RESET USB MODE VIDEO OUT SELECT
When [PC] is selected, the camera is connected via USB Mass Storage communication system. When [PictBridge (PTP)] is selected, the camera is connected via PTP (Picture Transfer Protocol) communication system.

PC NTSC

2 Select [PC] or [PictBridge (PTP)].

USB MODE

PC PictBridge (PTP)
If you connect the camera to a PC, select [PC]. (P84) If you connect the camera to a printer supporting PictBridge, select [PictBridge (PTP)]. (P86)

Connecting to a PC

If you use Windows 98/98SE, install the USB driver and then connect it to the computer. (When using Windows Me/2000/XP, Mac OS 9.x, Mac OS X, you do not have to install the USB driver. Refer to the separate operating instructions about PC connection for the installation of the USB driver.) Select [Cancel] to close the indications and disconnect the camera from the PC. Connect the camera after you set [USB MODE] again.
2 Connect the camera to a PC via the USB connection cable A (supplied).
Connect the USB connection cable with the [ ] mark facing the [1] mark on the [DIGITAL] socket. Hold the plug C to push into or pull out.

ACCESS

D: This message appears during data transfer. [Windows] The drive appears on the [My Computer] folder. If it is the first time you are connecting the camera to a PC, the required driver is installed automatically so that the camera can be recognized by the Windows Plug and Play, then it appears on the [My Computer] folder. [Macintosh] The drive is displayed on the screen. When you connect the camera with the card inserted, the drive is shown on the screen as untitled. When you connect the camera without the card (with the built-in memory used), the drive is titled as LUMIX.
A: USB connection cable (supplied) B: AC adaptor (DMW-AC1; optional)
1 Turn the camera on and then set [USB MODE] on the [SETUP] menu to [PC]. (P83)
If you set [USB MODE] to [PictBridge (PTP)] and then connect the camera to the PC, messages may appear on the screen of the PC.
Folder Composition The folder structure of the built-in memory, the card or MultiMediaCard is displayed as the illustration below.
Built-in memory SD Memory Card MultiMediaCard

DCIM 100_PANA

100_PANA P1000001.JPG
P1000002.JPG P1000999.JPG 101_PANA 999_PANA MISC
1 Folder number 2 File number 3 JPG: pictures MOV: motion images Files will be saved in each folder as follows. DCIM 100_PANA MISC Folders from [100_PANA] to [999_PANA] Pictures/motion images Files on which the DPOF print settings are recorded
When recording, up to 999 picture data can be included in 1 folder. If the number of picture data exceeds 999, another folder will be created. When you reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P24)
If the remaining battery power becomes low during communication, the status indicator blinks and the alarm beeps. In this case, stop the communication at once. While [ACCESS] is being displayed, do not disconnect the USB connection cable. When the OS of your PC is Windows 2000 and you connect the camera to the PC with the USB connection cable, do not replace the card with the camera connected to the PC. The information in the card may be damaged. Do not use any other USB connection cables except the supplied one. For more information, refer to the separate operating instructions about PC connection. Also refer to the operating instructions of the PC. If the card is not inserted when the camera is connected to a PC, you can edit or access the picture data in the built-in memory. If the card is inserted, you can edit or access the picture data in it. You cannot switch the recording medium between the built-in memory and the card while the camera is connected to the PC. When you want to switch the recording medium, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the PC again. PictBridge (PTP) setting Even if you set the [USB MODE] to [PictBridge (PTP)], you can connect to the PC only when the OS is Windows XP Home Edition, Windows XP Professional or Mac OS X. You can only load pictures from the camera and cannot write them on the card or delete them. When there are 1000 or more pictures on a card, the pictures may not be imported.

Troubleshooting

If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the [SETUP] menu. (P24) Batteries and the power source 1: The camera is turned off immediately even when the battery power is full. The battery indication shows less than the actual remaining battery power even if new batteries are inserted. Is [BATTERY TYPE] selected correctly? Select the item on [BATTERY TYPE] in the [SETUP] menu. (P24) 2: The camera cannot be operated even when it is turned on. Are the batteries inserted correctly? Use batteries that have been sufficiently charged when you use Ni-MH batteries. 3: The LCD monitor is turned off even when the camera is turned on. Is the power save mode (P24) or economy mode (P54) activated? Press the shutter button halfway to cancel these modes. Are the batteries exhausted? Replace them with batteries which have enough capacity. (When you use Ni-MH batteries, charge them.) 4: The LCD monitor is turned off sometimes when the camera is turned on. Is the LCD monitor turned off soon after you take pictures with the flash? While the flash is being charged, the LCD monitor is turned off. 5: The camera is turned off immediately even after it is turned on. Are the batteries exhausted? Replace them with batteries which have enough capacity. (When you use Ni-MH batteries, charge them.) If you leave the camera with turning it on, the batteries are exhausted. Turn the camera off frequently by using the economy mode (P54), the power save mode (P24), etc. Recording 1: The picture cannot be recorded. Is the mode dial correctly set? Is there any memory capacity left on the built-in memory or the card? Before recording, delete some pictures. 2: The subject is not focused properly. The focus range varies depending on the recording mode. Rotate the mode dial to set to the proper mode for the distance to the subject. Is the subject out of the focus range? (P33) When you cannot focus on the subject even if you tried many times, turn the camera off once and turn it on again. 3: The recorded picture is blurred. When taking a picture in shaded areas or indoors, the shutter speed becomes slow and the optical image stabilizer function may not work properly. In this case, we recommend holding the camera with both hands firmly to take pictures. When the [SLOW SHUTTER] (P67) is set, we recommend using a tripod.

Flash range: (ISO AUTO) Approx. 30 cm (0.98 feet) 4.2 m (13.8 feet) (WIde) AUTO, AUTO/Red-eye reduction, Forced ON (Forced ON/ Red-eye reduction), Slow sync./Red-eye reduction, Forced OFF Built-in Memory/SD Memory Card/MultiMediaCard 2304k1728 pixels, 1600k1200 pixels, 1280k960 pixels, 640k480 pixels, 1920k1080 pixels (Still picture) 320k240 pixels (Motion image) Fine/Standard JPEG (Design rule for Camera File system, based on Exif 2.2 standard)/DPOF corresponding QuickTime Motion JPEG (motion images without audio) USB 2.0 (Full Speed) NTSC/PAL Composite (Switched by menu) Dedicated jack (8 pin) type 1 jack 93.5 mm (W)k63.0 mm (H)k30.7 mm (D) (3 11/16q (W)k2 1/2q (H)k1 7/32q (D)) (excluding the projection part) Approx. 142 g/5.01 oz (excluding Memory Card and batteries) Approx. 188 g/6.63 oz (with batteries) 0oC 40oC (32oF 104oF) 10% 80%
Digital Camera Accessory System
Accessory# Figure Description

DMW-AC1

AC Adaptor
RP-SDK01GU1A RP-SDK512U1A RP-SDH256U1A RP-SD128BU1A RP-SD064BPPA RP-SD032BPPA BN-SDCAPU/1B
1 GB SD Memory Card 512 MB SD Memory Card 256 MB SD Memory Card 128 MB SD Memory Card 64 MB SD Memory Card 32 MB SD Memory Card SD USB Reader/Writer (compatible with MultiMediaCard) SD PC Card Adaptor (compatible with MultiMediaCard)

BN-SDABPU/1B

* NOTE: Accessories and/or model numbers may vary by country. Please consult your local dealer.
Digital Camera Accessory Order Form

(For USA Customers)

Please photocopy this form when placing an order. 1. Digital Camera Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price
Subtotal Your State & Local Sales Tax Shipping & Handling Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.SHIPMENTS) VISA MasterCard Discover (Please do not send cash) 4. Shipping information (UPS delivery requires complete street address)
Ship To: Mr. Mrs. Ms. First Street Address Night City State Zip ( )
Credit Card # Expiration Date Customer Signature Make Check or Money Order to: PANASONIC ACCESSORIES

Phone#: Day ( )

TO OBTAIN ANY OF OUR DIGITAL CAMERA ACCESSORIES YOU CAN DO ANY OF THE FOLLOWING: VISIT YOUR LOCAL PANASONIC DEALER OR CALL PANASONICS ACCESSORY ORDER LINE AT 1-800-332-5368 [6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME] OR MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE 20421 84th Avenue South Kent, WA. 98032
In CANADA, please contact your local Dealer for more information on Accessories.
Request for Service Notice (For USA Only)
Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. of purchase. Request for Service Notice: Please includesoyour proof your repair.) (Failure to do will delay

Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-272-7033. For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of media or images, data or other memory content. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor. PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Customer Services Directory (For USA Only)
For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact:
1-800-272-7033, Monday-Friday 8:30am-8pm EST. Web Site: http://www.panasonic.com/consumersupport
You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site.

Accessory Purchases:

Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to: npcparts@us.panasonic.com You may also contact us directly at: 1-800-332-5368 (Customer Orders Only) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST) (Visa, MasterCard, Discover Card, American Express, Check)

 

Tags

HQ9190 WR450F-2004 FA162C WD-10160TP EN6800 3 2 1800-654S SP-PW100 Camaro 1996 MT1055 Espio 738G TM-H5000II CVC477W Bizhub 361 ML-8200 Korg I4S EA3210 SSE-UMB-100 Motorola C119 CA280 SC-D352 Gladiator 550 LE40R87BD DC211 Kddv5100J-KD-dv5100 LM-M140D Review Gr-d93 MDR-F1 Fo-a660 Connector 2 5 MD-MT88 700SI PS50B650 CA-520 RCD-S55 NBG-460N Siemens C70 Chassis Motorola H390 Catera 2000 Series WB650 XZ550 OT-S626A Amber QB965W SE567 FDF105 ER 133 FWF3135 Strd2020 LE32C453c4H CMT-ED1 959NF Passenger HC-720 ME DAV-X1V Elantra KDC-8021 Acoustic SE DEH-2900MPB KAC-526 LE46C653 Bizhub C353 FAX-214 800 PEL Z705C Samsung N150 Backlight 6291500X61 Presets VBS Coolpix S9 Datasheet Microtower PC EWF12470W UE40B6000 Stylus C120 Player Base-V20X DPP-FP67 Media 5070 DVR98 2-70G WG1205R Samsung W629 A105-S4384 - 35 DC2101 32A455c1D Studioworks 44I MDE1100AES D-NF400 PMD650 SM880 IMP-550 Model 1140 FE-320 Hblg1203R SA-9900

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101