MicroBeam Battery Compatibility List The Microbeam 256 should only be used with batteries showing a rating of at least 4500mAh / 32W JVC BN mount compatible to the following digital camcorder models: JVC CU-VH1 JVC CU-VH1US JVC GR-33 JVC GR-4000US JVC GR-D20 JVC GR-D200 JVC GR-D2000 JVC GR-D200U JVC GR-D200US JVC GR-D201 JVC GR-D20E JVC GR-D20EG JVC GR-D21 JVC GR-D21EK JVC GR-D22 JVC GR-D220 JVC GR-D225 JVC GR-D225EK JVC GR-D228 JVC GR-D22US JVC GR-D23 JVC GR-D230 JVC GR-D230EK JVC GR-D230US JVC GR-D231 JVC GR-D238 JVC GR-D30 JVC GR-D30E JVC GR-D30U JVC GR-D30US JVC GR-D31 JVC GR-D31EK JVC GR-D31US JVC GR-D33 JVC GR-D33EK JVC GR-D33US JVC GR-D34 JVC GR-D40 JVC GR-D43 JVC GR-D43EK JVC GR-D47 JVC GR-D50 JVC GR-D50E JVC GR-D50K JVC GR-D51 JVC GR-D53 JVC GR-D54 JVC GR-D60 JVC GR-D60EK JVC GR-D63 JVC GR-D63EK JVC GR-D70 JVC GR-D70E JVC GR-D70EK JVC GR-D70K JVC GR-D70U JVC GR-D70US JVC GR-D72 JVC GR-D72US JVC GR-D73 Panasonic CRG-D" mount compatible to the following digital camcorder models: Panasonic AG-DV1DC Panasonic AG-DVC15 Panasonic AG-DVC30 Panasonic AG-DVC32 Panasonic AG-DVC60 Panasonic AG-DVC62 Panasonic AG-DVC7 Panasonic AG-DVX100 Panasonic AG-DVX1000 Panasonic AG-DVX100A Panasonic AG-DVX100BE Panasonic AG-DVX102A Panasonic AG-DVX102B Panasonic AG-HVX200 Panasonic AJ-PCS060G (Portable Hard Disk Unit) Panasonic DZ-MX5000 Panasonic NV-C1 Panasonic NV-C2 Panasonic NV-C3 Panasonic NV-C5 Panasonic NV-C7 Panasonic NV-D89 Panasonic NV-DA1 Panasonic NV-DA1B Panasonic NV-DA1EG Panasonic NV-DA1EN Panasonic NV-DA1ENA Panasonic NV-DB1 Panasonic NV-DS11 Panasonic NV-DS11EN Panasonic NV-DS11ENA Panasonic NV-DS11ENC Panasonic NV-DS12 Panasonic NV-DS12B Panasonic NV-DS12EG Panasonic NV-DS15 Panasonic NV-DS150 Panasonic NV-DS150B Panasonic NV-DS15A Panasonic NV-DS15B Panasonic NV-DS15EG Panasonic NV-DS15EN Panasonic NV-DS15ENC Panasonic NV-DS200 Panasonic NV-DS25 Panasonic NV-DS25A Panasonic NV-DS25EG Panasonic NV-DS25EN Panasonic NV-DS27 Panasonic NV-DS27B Panasonic NV-DS28 Panasonic NV-DS28A Panasonic NV-DS28B Panasonic NV-DS29 Panasonic NV-DS29EG Panasonic NV-DS3 Panasonic NV-DS30 Panasonic NV-DS30A Panasonic NV-DS30EG
Sony "NP" mount compatible to the following digital camcorder models: Sony DSR-PD150 Sony DSR-PD150P Sony DSR-PD170 Sony DSR-PD170P Sony HDR-FX1E Sony CCD-RV100 Sony CCD-RV200 Sony CCD-SC5 Sony CCD-SC5/E Sony CCD-SC6 Sony CCD-SC65 Sony CCD-SC7 Sony CCD-SC7/E Sony CCD-SC8/E Sony CCD-SC9 Sony CCD-TR1 Sony CCD-TR11 Sony CCD-TR1100E Sony CCD-TR12 Sony CCD-TR18 Sony CCD-TR18E Sony CCD-TR1E Sony CCD-TR2 Sony CCD-TR200 Sony CCD-TR205 Sony CCD-TR215 Sony CCD-TR2200E Sony CCD-TR2300 Sony CCD-TR2300E Sony CCD-TR280PK Sony CCD-TR290PK Sony CCD-TR3 Sony CCD-TR300 Sony CCD-TR3000 Sony CCD-TR3000E Sony CCD-TR3100E Sony CCD-TR311E Sony CCD-TR315 Sony CCD-TR315E Sony CCD-TR317 Sony CCD-TR3200E Sony CCD-TR3300 Sony CCD-TR3300E Sony CCD-TR411E Sony CCD-TR412E Sony CCD-TR413 Sony CCD-TR414 Sony CCD-TR415E Sony CCD-TR416 Sony CCD-TR417 Sony CCD-TR417E Sony CCD-TR425E Sony CCD-TR427 Sony CCD-TR427E Sony CCD-TR500 Sony CCD-TR511E Sony CCD-TR512E Sony CCD-TR515E Sony CCD-TR516 Sony CCD-TR516E

Product Catalog

2008 / 2009
- for digital video cameras-

ewa-marine GmbH

Blumenstrae 17 - D-82538 Geretsried Phone: +49 (0)8171 / Fax: +49 (0)8171 / www.ewa-marine.com

Page 1 from 39

Index:
- About us! - General Informations about ewa-marine housings - Which housing do I need for my camera? - Overview / pictures from all ewa-marine products
Page 3 Page 4 Page Page 37 39

Page 2 from 39

About us:
Ewa-marine the most used underwater camera housing worldwide!
Under water, on the water, in the desert or in the rain. with ewa-marine your camera can be right there with you ! ewa-marine has been manufacturing under water housings since 1970, to fit nearly every film-, video-, and stills photo camera on the market! All ewa-marine housings are made in our factory in Germany and all models have an hardened, optical glass front port. Founded 1947 near Munich, Germany, our company has a long history of producing accessories for photo and film-cameras. In 1970, nearly 30 years ago, we invented and started manufacturing flexible protective housings and capes for photo-, film and since 1980 also for video cameras. We have a world wide reputation for high quality products and everything bearing the ewa-marine name is quality "made in Germany". All products are developed and then hand made in our factory In Geretsried, Bavaria. Each unit is subjected to a series of stringent tests before leaving the factory. The range of ewa-marine flexible housings offers solutions for most photo- (conventional and digital), film- and video-cameras available today (and in the past). We can offer you a product to suit your camera, whether its a simple digital snap shot camera or a high cost SLR photo or even a TV-camera. Our present range covers the following products: * * * * * * * video-camcorders SLR-cameras compact-cameras film- and TV-cameras mobile phones VFH- and UHF -radios documents, maps etc.
The flexible housings are 100% water proof and designed to cope with water (including salt or sea water) Sand, dust and other nasty conditions, while allowing you to safely operate the equipment at the same time. The range of ewa-marine capes (or as they are sometimes called: hurricane hoods) and the under water housings provide the solution to protect your valuable equipment in all sorts of nasty weather conditions. And as a bonus, the housings combined with your very own camera allow you to explore the fascinating and colourful underwater world, because they are fully submergible and absolutely watertight.

Page 3 from 39

General informations about ewa-marine products:

- foam inserts!

- up to 10 meters depth!
- high-quality optical glass at the front port of each housing!
- German TV inspectorate type approval!
- completly hand made in Germany!

- no O-rings needed!

- extremly light housings for easy carring wherever you go!
- all materials used are recyclable!
- all housings are universal so that you can use more cameras inside!
- rust-proof screw closure that is resistant to seawater!
- Many accessory like Camera dry, weights and step up rings available!
- special, multiple-layer transparent sheeting, extremy robust for a long service life!
- the most video underwaterhousings have litttle finger stalls to work inside the housing on your camera!

Page 4 from 39

Which housing do I need for my camera?
Manufacturer: Series: Notation: Housing: CA-Adapter: RA-Adapter:

For the V2000 we recommend cameras like the Sony VX2000, VX2100, PD150 and PD170! Silica gel and foam padding included. Also step up ring RA58-62 and CA62 adapter.
Universal underwaterhousing. Silica gel and foam padding included. Also step up ring RA37-52 and CA52 adapter.
The VSD is a ewa-marine underwaterhousing for the Panasonic SDR-100, the Sanyo Xacti Series and similar. Silica gel and step up ring RA37-52 included.
The VLA is for cameras without any view finder. So the special on the VLA (and VSD) housing is that you can work with the open display underwater. We recommend the VLA for the Panasonic HDC-SD9, HDC-HS9, Canon HF10, JVC GZ-HD6 ans similar cameras. Silica gel, several adapters and foam padding included.
For the VFX we recommend cameras like the Sony HDV-FX1, HDV-FX1000, HVR-Z1, HVR-Z5 and similar. Silica gel and foam padding included. Also CA72 adapter.
For the VF7 we recommend the cameras Sony HDV-FX7 and HVR-V1. Step up ring RA62-67, CA72 adapter, silica gel and foam padding included.

Page 37 from 39

We developed this housing for the Canon XH-G1 and Canon XH-A1. CA72 adapter, silica gel and foam padding included.
We developed this housing for the Canon XM2 and Canon GL2. It`s the follower from the VXM. Adapters, silica gel and foam padding included.
We specially made this housing for the Panasonic AG-HVX 200. The adaper (CA82), silica gel and foam padding included.
The VEX1 was especially deverloped for the Sony PMW-EX1 XDCAM! You can open the display from your EX1 In your hosing! CA77 adapter, silica gel and foam padding included.
We developed this housing for the Canon XL2 (MiniDV) and Canon H1 (HDV). Adapters, silica gel and foam padding included.
We`ve two different models for ENG shoulder cameras. The TV184 and TV182.In the TV184 you can use camera system from 660 to 730 mm length and in the TV182 from 540 to 650 mm length. So it just depends on your camera system what total length you use! Serveral adapters and silica gel included! The TV housings are only for up to 5m depth!

A-Mini

We also can offer you housings for cinematics cameras. For the Aaton Minima we recommend the A-Mini. For the ARRI 16SR with the MK2 10-100mm we recommened the AM16.

Page 38 from 39

Accessory

CA Adapter

The CA adapter you need to fix your camera with the housing. You only can use this system if the front glass has a filter diameter from 75mm or bigger. We`ve different sizes. From 49 mm up to 82 mm.

Step-up ring

With step up rings you fix your lens with the CA adapter system. With smaller front glasses you also can just use the step-up ring to fix your camera. Different rings are available from 25 mm up to 82 mm.
To absorb the condansate in the underwater housing. Camera dry CD5 One CD5 includes 5 sachets of indicator silica gel.
Weight for some video housings. The BV2 is a pair. Each lead has 750 gram. You can mount it outside the housing or use it inside! Just applay the weights under your camera in the housing.
The BS7 is a textile bag in which lead pelleted included. You can use it only inside the housing. The BS7 is a 700 gram soft lead.

No picture available!

Cable-exit
We can mount on all our video housings a extra cable exit. You can take maximum four cables up to 3 to 4 mm diameter out.

Please note:

For more information about all our products please visit us at our website www.ewa-marine.com! Also if you`re unsure which housing you need www.ewa-marine.com - for a complete guide!

Page 39 from 39