PT-D5000ES PT-D5000ELS

DLP Based Projector
Communicate more effectively with crisp, vibrant images

XGA 5,000 lm

A New Standard for 1-chip DLP Projectors
Refined Image Quality with Reliablility and Easy Maintenance
Panasonic's PT-D5000ES/D5000ELS* 1-chip DLP projectors bring excellent image quality and natural, lifelike colours to your images. They also have a wealth of unique technologies, like our newly developed RGB Booster, which combines high brightness with superb colour reproduction, a Dual-Lamp System for solid reliability, and the Auto Cleaning Filter, which eliminates the need for filter maintenance for approximately 10,000 hours. These all-round projectors are extremely well suited to use in schools or training facilities, presentations, and business meetings or conferences.

PT-D5000ES PT-D5000ELS*

*The PT-D5000ELS is sold without lenses. The specifications are the same as those of the PT-D5000ES.
Vivid Picture Quality with High Brightness
RGB Booster Significantly Improves Colour Reproduction
The RGB Booster achieves high image quality with levels of colour reproduction (up to 145% that of conventional models) and brightness that make each colour stand out. It combines Panasonic's proprietary Vivid Colour Control technology with a newly engineered Lamp Modulation Drive System for a 1-chip DLP projector that produces bright and vivid colours. Vivid Color Control
This unique control technology optimises the use of the colour segment areas of the colour wheel. It increases the brightness of each RGB colour by minimising the unallocated portions between the colours, to achieve truly vivid colouring.

Conventional System

RGB Booster
Lamp Modulation Drive System
With the new lamp modulation technology, the projector is now able to control the lamp intensity for each of the red, green, blue, and white segments of the colour wheel separately. Because the actual light output is controlled in relation to each colour segment, light usage is optimised and colour balance is obtained without lowering the brightness. This results in bright vivid images with increased colour fidelity.
Conventional Colour Wheel Conventional Lamp Drive System

Vivid Colour Control

Conventional technology was Colour B unable to use the boundaries Wheel between colours. Lamp
Ensures maximum utilisation Colour Wheel B of the colour wheel by minimising unused section. Lamp

W G B R

Unused section
Because the lamp power was fixed in conventional projectors, colour reproduction was enhanced by sacrificing brightness.
By modulating the lamp power, we can maximise the colour reproduction of each colour without sacrificing brightness.
High Brightness with AC Lamp
High-efficiency light convergence technology and a colour wheel work together to achieve an outstanding 5,000 lm of brightness. It reproduces clear, crisp images even in bright rooms.
Detail Clarity Processor Brings Depth and Clarity to Details
This advanced image-processing circuit analyses the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three-dimensional appearance with crisp, clear detail.

Without With

System Daylight View 2 for Enhanced Colour Perception
Image details are less clear when a projector is used in a room with the lights on. Panasonic's System Daylight View 2 improves brightness perception by adjusting sharpness, gamma curves, and colour corrections. This produces crisper, more stunning images with vivid colours even under bright conditions.

OFF ON

Conventional sharpness control: Sharpness is applied uniformly, which can cause a halo or ring effect and diminish the sense of depth.
Detail Clarity Processor: Signal frequency is extracted real-time and necessary sharpness is applied at varying degrees for natural, life-like images.

Easy Maintenance and Superior Reliability
Dual-Lamp System Prevents Image Interruptions
The Dual-Lamp System increases brightness and eliminates the need to interrupt a presentation if a lamp should burn out (in dual-lamp operation mode). The Lamp Relay mode also operates the lamps alternately to enable 24/7 projector operation.
Liquid Cooling System Attains a High Level of Reliability
The liquid cooling system directly cools the DLP chip to improve performance and enable operation up to 45C/113F. This allows use in a wider variety of environments, while stabilising performance and keeping the unit quiet even in harsh conditions.
Embedded pump Enlarged radiator
Auto Cleaning Filter Reduces Maintenance Hassles
The Auto Cleaning Filter (ACF) provides a clean filter surface whenever it senses clogging, and brushes dust from the filter. This enhances the Micro Cut Filter's performance, so no filter replacement is needed for over 10,000 hours*, reducing maintenance.

ACF cartridge

Micro Cut Filter
An electrostatic filter in the air intake section traps particles that are 1 micron or larger. It guards the optical block and keeps dust from entering the interior to provide stable operation.

DLP chip

Reservoir tank
*The replacement cycle given here is a guideline. It may differ depending on the usage environment.
System Integration Flexibility

Flexible Installation

The wide adjustment range of the powered horizontal/vertical lens shift function assures virtually distortion-free images and adds convenience and versatility. It lets you easily make adjustments with the remote control. The unit can also be rotated 360 vertically. This means you can install it at any angle you want, to accommodate different installation conditions.

Mechanical Lens Shutter

The mechanical lens shutter completely blocks annoying light leakage when the PT-D5000ES is on standby or temporarily not in use, such as during a meeting.

PJLink Compatibility

The LAN terminals support PJLink Class 1 connection, which is highly convenient for system construction.
Web Browser Control/Monitoring and E-mail Message Alert
The PT-D5000ES can be easily operated remotely over a LAN network, because it is all done using the computer's familiar web browser. Furthermore, the projector sends an e-mail message to notify the operator when an error has Remote control PT-D5000ES occurred, or LAN PC a lamp needs e-mail to be replaced.
Multi Projector Monitoring & Control Software
Panasonic's original "Multi Projector Monitoring & Control" freeware allows the user to control and monitor multiple projectors at the same time via LAN. Projectors can be scheduled to turn on and off at a certain hour everyday. When a problem occurs, an alarm message is sent to the monitoring/controlling PC.

Eco Standby Mode*

The PT-D5000ES has attained a low standby power level of 0.3 W, which is a top-class level in its class. It also helps to slash running costs, and reduces environmental impact.
* In Eco standby mode, LAN-based network functions such as the standby ON function will not operate.

Internet LAN

Images can be projected straight down or straight up.

e-mail

Other Features
Full 10-bit Signal Processing Dynamic Sharpness Control Circuitry 3D Colour Management System 30m Long Range HD IP Converting Circuitry Wireless Remote Control Digital Signal Noise Direct Power Off Reduction Circuitry

Ecology-conscious Design

Panasonic works from every angle to minimize environmental impact in the product design, production and delivery processes, and in the performance of the product during its life cycle. The PT-D5000ES reflects the following ecological considerations. No halogenated flame retardants are used in the cabinet. Lamp power switching further reduces power consumption. Auto Power Save activates standby mode when no signal is input. Standby power consumption of only 0.2 W** has been achieved.

Recommended Applications

Conference / Classroom Auditorium / House of worship Rental & Staging Museum
The PT-D5000ES boasts superior image quality, flexible installation, and easy maintenance, making either model an ideal choice for use in classrooms, auditoriums, houses of worship, museums, and much more.

Specifications

Power supply Power consumption DLP chip Panel size Display method Pixels PT-D5000ES PT-D5000ELS 220240 V AC 50/60 Hz 600 W (670 VA) (Eco standby mode*1: 0.3 W, Standby mode normal: 9 W. Both with fan stopped.) 0.7 diagonal (4:3 aspect ratio) DLP chip x 1, DLP system 786,432 (1,024 x 768) x 1, total of 786,432 pixels Powered zoom/focus lenses (1.82.4:1), F 1.72.0, f 25.633.8 mm Optional powered zoom/focus lenses 240 W UHM lamps (x 2) (dual-lamp system) 50600 inches (50200 inches with the ET-DLE055), 4:3 aspect ratio 5,000 lumens (dual-lamp) 90 % 1,000:1 (full on/full off) 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.) Horizontal: 1591 kHz, Vertical: 5085 Hz, Dot clock: 162 MHz or lower Horizontal: 1591 kHz, Vertical: 5085 Hz, Dot clock: 150 MHz or lower 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60p, 1080/50p Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)

Multiple terminals

1 LAN Terminal 2 Video Input 3 S-Video Input 4 RGB 1 Input 9 Serial Input 5 RGB 2 Input 10 Serial Output 6 DVI-D (HDCP Compatible) Input 7 Remote 1 Input and Output 8 Remote 2 Input

Lamp Screen size Brightness*2 Centre-to-corner uniformity*2 Contrast*2 Resolution Scanning frequency DVI-D RGB YPBPR (YCBCR)

Dimensions

unit: mm (inch)

440 (17-5/16)

S-Video/Video
Optical axis shift Vertical: +50 % (powered), horizontal: 10 % (powered) Keystone correction range Vertical: 40 (30 with the ET-DLE055) Installation Ceiling/floor, front/rear 3 Terminals* DVI-D IN DVI-D 24-pin RGB 1/YPBPR IN BNC x 5 RGB 2/YPBPR IN D-sub HD 15-pin VIDEO IN BNC S-VIDEO IN Mini DIN 4-pin SERIAL IN D-sub 9-pin (RS-232C compliant) SERIAL OUT D-sub 9-pin REMOTE 1 IN M3 jack REMOTE 1 OUT M3 jack REMOTE 2 IN D-sub 9-pin LAN RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink Power cord length 3.0 m (910 ) Cabinet material Molded plastic Dimensions PT-D5000ES 498 mm x 175 mm*4 x 440 mm*5 (19-19/32 x 6-7/8 *4 x 17-5/16 *5) (with supplied lens) (W x H x D) PT-D5000ELS 498 mm x 175 mm*4 x 432 mm (19-19/32 x 6-7/8 *4 x 17) (without lens) Weight*6 PT-D5000ES Approx. 16.0 kg (35.3 lbs) (with supplied lens) PT-D5000ELS Approx. 15.2 kg (33.5 lbs) (without lens) Operating temperature 045C (32113F) Operating humidity 2080 % (no condensation) Supplied accessories Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope
*1 In Eco standby mode, LAN-based network functions such as the standby ON function will not operate. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 The HD/SYNC and VD inputs do not accept the tri-level sync signal. *4 With leg at shortest position. *5 Including the supplied lens. *6 Average value. May differ depending on models.

432 (17)

498 (19-19/32)

Projection distance

Screen size (4:3)
Diagonal image size 50" 80" 100" 150" 200" 300" 400" 500" 600" With ET-DLE150 1.3-2.0:1 min. max. 1,344mm 1,967mm 4.5' 6.5' 2,183mm 3,177mm 7.2' 10.5' 2,742mm 3,983mm 9.0' 13.1' 4,140mm 6,000mm 13.6' 19.7' 5,537mm 8,016mm 18.2' 26.3' 8,333mm 12,049mm 27.4' 39.6' 11,129mm 16,082mm 36.6' 52.8' 13,924mm 20,115mm 45.7' 66.0' 16,720mm 24,148mm 54.9' 79.3' With supplied lens 1.8-2.4:1 min. max. 1,785mm 2,376mm 5.9' 7.8' 2,895mm 3,840mm 9.5' 12.6' 3,635mm 4,816mm 12.0' 15.9' 5,485mm 7,256mm 18.0' 23.9' 7,335mm 9,696mm 24.1' 31.9' 11,035mm 14,576mm 36.3' 47.9' 14,735mm 19,456mm 48.4' 63.9' 18,435mm 24,336mm 60.5' 79.9' 22,135mm 29,216mm 72.7' 95.9' With ET-DLE250 2.4-3.7:1 min. max. 2,361mm 3,777mm 7.8' 12.4' 3,826mm 6,090mm 12.6' 20.0' 4,803mm 7,633mm 15.8' 25.1' 7,244mm 11,489mm 23.8' 37.7' 9,686mm 15,344mm 31.8' 50.4' 14,568mm 23,056mm 47.8' 75.7' 19,451mm 30,768mm 63.9' 101.0' 24,334mm 38,480mm 79.9' 126.3' 29,217mm 46,192mm 95.9' 151.6' With ET-DLE350 3.7-5.6:1 min. max. 3,713mm 5,681mm 12.2' 18.7' 6,023mm 9,170mm 19.8' 30.1' 7,562mm 11,496mm 24.9' 37.8' 11,411mm 17,312mm 37.5' 56.8' 15,259mm 23,127mm 50.1' 75.9' 22,956mm 34,758mm 75.4' 114.1' 30,653mm 46,389mm 100.6' 152.2' 38,350mm 58,020mm 125.9' 190.4' 46,047mm 69,651mm 151.1' 228.6' With ET-DLE450 5.5-8.9:1 min. max. 5,525mm 8,912mm 18.2' 29.3' 9,020mm 14,438mm 29.6' 47.4' 11,351mm 18,123mm 37.3' 59.5' 17,177mm 27,333mm 56.4' 89.7' 23,004mm 36,544mm 75.5' 119.9' 34,656mm 54,966mm 113.8' 180.4' 46,309mm 73,387mm 152.0' 240.8' 57,961mm 91,809mm 190.2' 301.3' 69,614mm 110,231mm 228.4' 361.7' With ET-DLE055 0.8:1 808mm 2.7' 1,322mm 4.4' 1,664mm 5.5' 2,519mm 8.3' 3,375mm 11.1'

Optional accessories

Zoom lens ET-DLE150 (1.32.0:1)
Zoom lens ET-DLE250 (2.43.7:1)
Zoom lens ET-DLE350 (3.75.6:1)
Zoom lens ET-DLE450 (5.58.9:1)
Fixed-focus lens ET-DLE055 (0.8:1)

NOTES ON USE

1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. Never place objects on top of the projector while it is in operation. Make sure there is an unobstructed space of 500 mm (1.64 feet) or more around the projector's exhaust openings. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 C (32 F) and 40 C (104 F). Also make sure the projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. * Even when the ambient temperature near the intake opening is 40 C (104 F) or lower, an accumulation of hot air inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions. 4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per lamp if using the dual-lamp mode. 5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. The brightness of the lamp will gradually decrease with use.

Filter

Ceiling mount bracket
Replacement lamp unit ET-LAD60 ET-LAD60W (twin pack)
Replacement filter unit ET-ACF100
ET-PKD56H (for high ceilings) ET-PKD55S (for low ceilings)

ET-PKD55S

ET-PKD56H
For more information about Panasonic projectors Please contact Panasonic or your dealer for a demonstration.
http://panasonic.net/avc/projector

175 (6-7/8)

JQA-1617

EC98J2010

Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export regulations. An application has been filed for trademark rights, or trademark rights have been granted, for PJLink in Japan, United States of America and other countries and area. XGA is trademark of International Business Machines Corporation. All other trademarks are the property of their respective trademark owners. Projection Images simulated. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. (C) 2009 Panasonic Corporation All rights reserved.
All information included here is valid as of May 2009.
PT-D5KE1 Printed in Japan.