PT-D7700E/E-K
DLP-Based SXGA+ Projector
The Professional Solution

PT-D7700E-K

Liquid-cooling device
3-Chip DLP-Based System in a Sleek, Compact Body
The Worlds Lightest 3-Chip LargeVenue DLP-Based Projector The PT-D7700E series combines the latest 3-chip system based on DLP technology with a new optical system developed using our exclusive technology. We have dramatically reduced the cabinet size, creating a unit wit only one-fifth the size of conventional large-venue 3-chip DLP-based projectors. This feat of design and technology achieved the worlds lightest* 3-chip projector with DLP technology. With a weight of 22.0 kg (48.5 pounds), the PT-D7700E/E-K can go places other bulky 3-chip projectors with DLP technology have never gone before.
* As of July 2004. Conventional large-venue DLP-based projectors The PT-D7700E/E-K are the worlds smallest and lightest 3-chip projectors with DLP technology.
technology advantages. They deliver 7,000 lumens of brightness, offering superior Colour reproducibility. Astounding 4,000:1 Contrast Ratio with Dynamic Iris Panasonics original Dynamic Iris achieves a dramatically improved contrast ratio of 4,000:1 in the PT-D7700E series. Dynamic Iris constantly monitors the input signal, and adjusts the intensity of the light source to match it. This highly advanced function provides high-speed, linear response to changing images with 256-step precision. It also combines with dynamic gamma control to produce deep, rich blacks while preserving the brightness in the lighter portions of dark scenes. The resulting images are bright and vivid, comparable to direct-view TVs and computer monitors. 16-Bit Colour Depth for Film-Like Natural Image Applying 16-bit drive to each of the RGB panels produces 8 times the level of expression (a total of 24 times for all three RGB panels) of conventional 13-bit drive devices. This system creates extremely smooth tonal expression with approx. 65,000 shades of gradation. Progressive Cinema Scan (3/2 Pulldown) This interlace/progressive conversion technology automatically detects when the input signal is derived from filmed material and selects the optimum progressive processing method to assure faithful reproduction of the original image. It is also compatible with the high-definition 1080i format. Dynamic Sharpness Control The Dynamic Sharpness Control circuit adjusts the video signal waveforms based on the difference in the brightness of adjacent pixels for a sharp, clear picture that is relatively unaffected by signal noise.
tors with DLP technology. Panasonics newly developed liquidcooling system extends projector performance and attains a high level of reliability.

Cooling liquid Off light

On light
Dustproof Design with Sealed Optical Block We have minimised the effect of dust by completely sealing the optical block. This dust-free design helps ensure that 3-chip projectors with DLP technology will continue to deliver crisp, sharp, high-resolution images over an extended service life. Dual Lamp System and Lamp Relay Function The use of two lamp systems increases brightness and eliminates the need to interrupt a presentation if a lamp burns out (in dual lamp operation mode). In single lamp operation mode, the lamp relay function greatly extends continuous operating time. Optional Long-Life Lamp A long-life lamp that stretches lamp life to 4,000 hours is available as an option. In single lamp operation mode, the lamp lamp relay function allows non-stop operation 24 hours a day for up to 47 weeks without replacing the lamps. The use of UHM lamps dramatically cuts operating costs. Easy Lamp Replacement The PT-D7700E series is designed to allow easy lamp replacement with the projector in its fully mounted condition. The lamp itself is the only part that needs to be replaced, which further increases overall reliability. Dust Filter Cleaning The dust filter is easy to clean, and you dont have to make any changes in the projectors mounting condition. This helps to minimise user down time.

PT-D7700E

Superb Image Quality
Image Quality from 3-Chip DLP Technology DLP technology delivers outstanding image resolution. In 3-chip systems with DLP technology considered among the worlds most advanced projector enginesa Digital Micromirror Device (DMD) chip is allocated to each of the red, green, and blue signals. This gives systems with DLP technology superior light utilisation for high brightness, digital processing for low noise and linear white balance, extended device life for minimal image degradation, and a quick response that eliminates afterimages. Powerful 7,000 Lumens In addition to the 300-watt UHM lamp, the PT-D7700E series incorporates digital and optical technologies that maximise the DLP

High Reliability and Easy Maintenance
Liquid-Cooling System In systems with DLP technology, the microscopic mirrors of the DMD chip turn the light on and off. During the off period, light is directed away from the lens. Handling the heat from this light is a major point in maintaining the long-term performance of projec-

remote control

Projector

e-mail

Internet

e-mail e-mail

Flexible System Applications
Horizontal/Vertical Lens Shift The PT-D7700E series is equipped with a motor-driven lens shifting function that moves the lens left, right, up, and down. It gives you easy, accurate adjustment when installing the projector. Optical Lenses for Various Venues A wide range of optional lenses with different throw distances are available in addition to the supplied lens. Optional lenses with super-long focal lengths of 8.0 to 15.0 are ideal for use in churches or screening rooms. These powered zoom/focus lenses enable the projectors to perform superbly in an array of projection environments, from classrooms to conference rooms. Its a snap to replace the click-in type lenses used in the bayonet system of the PT-D7700E series. Connection Terminals The PT-D7700E/E-K feature two RGB inputs, a composite video input and output, and an S-Video input. They also offer RS-232C/422 input and output, two remote inputs, and one remote output.
Built-In Multi-Screen Processor, Colour Matching and Edge Blending M ULTI - SCREEN PROCESSOR The PT-D7700E/E-K can project large, multiscreen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time. C OLOUR MATCHING When several units are used together, this function corrects for slight variations in the Colour reproduction range of individual projectors. The PC software assures easy, accurate control. Independent, 7-axis adjustment (red, green, blue, yellow, magenta, cyan, white) ensures high precision and minimises Colour variations. To simplify the set-up process, you can adjust the projectors before delivering them to the presentation site. The Colour-matching function accommodates up to nine units, for multi-screen or single screen presentation. E DGE BLENDING This function controls the brightness at overlapping image edges to assure uniform, natural-looking, multi-screen images. When projecting HD sources with a single projector, part of the DMD is unused. In multi-screen projections with two projectors, the DMDs increase the images horizontal resolution while maximising vertical resolution.

Colour matching Edge blending

Networking (Optional)

Wired LAN System The optional interface board ET-MD75NT for 10Base-T and 100Base-TX makes the PT-D7700E series network-ready. Simply hook the projector up to an existing LAN network for easy remote control and/or monitoring. System administrators will appreciate this feature when using the PT-D7700E/E-K as a fixed-installation projector. Web Browser Control/Monitoring Anybody can operate the PT-D7700E series by remote control or monitor its status over a LAN network, because it is all done using the computers familiar Web browser.
Connection terminals An optional board module can be added for more connection flexibility.
Projector Source Projector
E-Mail Message Alert The PT-D7700E series automatically sends an e-mail message to notify the operator when an error has occurred, or a lamp needs to be replaced, providing an advanced level of maintenance ease and reliability.
Abundant Optional Interface Boards In addition to the supplied connection terminals, an optional board module can be selected from a total of seven boards to match a variety of input source signals, including digital serial component signals. Quiet Operation The PT-D7700E series is designed for quiet operation. A newly developed liquid-cooled optical system and newly designed noisesuppression duct and control system help minimise operating noise. The fan rotation can now be adjusted in finer steps, so fan noise is reduced when rotation adjusts to match room temperature changes. This helps minimise sudden increases in fan noise during operation.
Built-in multiscreen processor Overlapping image edges Without edge blending

More Valuable Features

Mechanical shutter completely blocks light leakage when no image is being projected Momentary switching for RGB/Video input without disrupting the image 96 user memories Wireless/wired remote control unit with wireless mouse function* ID assignment for up to 64 units Coordinated group Wireless/wired remote control control for up to 26 groups (A-Z) Picture in picture (main/sub input source combinations possible only when using computer and video) Digital vertical keystone correction

With edge blending

The built-in multi-screen processor enables enlarged multi-screen projection without using any additional special equipment. Colour matching and edge blending make it easier to obtain proper multi-screen picture quality.
3x digital zoom Built-in test pattern Selectable 9-language on-screen menu (English, German, French, Spanish, Italian, Russian, Japanese, Chinese, Korean) Fan control for high elevations (above 1,400 m/4,600 feet)
* Requires the optional ET-RMRC2 wireless mouse receiver

Ecology-Conscious Design

Panasonic works from every angle to minimise environmental impact in the product design, production and delivery processes, and in the performance of the product itself over its life cycle. The PT-D7700E series reflects the following ecological considerations. Lead-free solder is used to mount components to the printed circuit boards. Lead-free glass is used for the lens. The packing case and operating manual are made from recycled paper. Lamp power switching further reduces power consumption.

Available in black (PT-D7700E-K) and white (PT-D7700E) cabinet colours.
Options for More Flexible Installation

Lenses Boards Brackets

Ceiling mount bracket ET-PKD75 Network board ET-MD75NT Analog RGB input board ET-MD95RGB Low ceiling mount bracket ET-PKD75S Dual stacking mount bracket ET-DFD75

DVI board ET-MD75DV

ET-D75LE1
Video/S-Video input board ET-MD95VM2
1.5-2.0:1 zoom lens ET-D75LE1 2.0-3.0:1 zoom lens ET-D75LE2 3.0-5.0:1 zoom lens ET-D75LE3 5.0-8.0:1 zoom lens ET-D75LE4 8.0-15.0:1 zoom lens ET-D75LE8 0.8:1 fixed-focus short-throw lens ET-D75LE5
SDI (480i/576i) input board ET-MD95SD1
Replacement lamp unit ET-LAD7500 Replacement lamp units
(Twin pack of ET-LAD7500 lamp units)

Handle

Carrying handle ET-HAD75
SDI (480i/576i/480p) input board ET-MD95SD2
ET-LAD7500W Replacement long-life lamp unit ET-LAD7700L

Receiver

Wireless mouse receiver ET-RMRC2
SDI (720p/1035i/1080i/1080-24p) input board ET-MD95SD3
Replacement long-life lamp units
(Twin pack of ET-LAD7700L lamp units)

ET-LAD7700WL

Projection Distance
Diagonal image size (aspect ratio: 4:3) min. 1.8 m / 5.8 (70) 2.5 m / 8.3 (100) 5.1 m / 16.7 (200) 7.6 m / 25.0 (300) 10.2 m / 33.3 (400) 15.2 m / 50.0 (600) 2.1 m / 6.8 3.0 m / 9.8 6.1 m / 19.9 9.1 m / 29.9 12.2 m / 40.0 18.3 m / 60.1 ET-D75LE1 1.5 2.0:1 max. 2.8 m / 9.0 4.0 m / 13.1 8.1 m / 26.5 12.2 m / 40.0 16.3 m / 53.4 24.5 m / 80.7 min. 2.8 m / 9.2 4.0 m / 13.2 8.2 m / 26.7 12.3 m / 40.2 16.4 m / 53.7 24.6 m / 80.7 ET-D75LE2 2.0 3.0:1 max. 4.2 m / 13.8 6.1 m / 19.9 12.2 m / 40.1 18.4 m / 60.4 24.6 m / 80.6 36.9 m / 121.1 Distance to screen ET-D75LE3 3.0 5.0:1 min. max. 4.2 m / 13.9 6.1 m / 19.9 12.3 m / 40.2 18.4 m / 60.4 24.6 m / 80.7 36.9 m / 121.1 7.1 m / 23.3 10.2 m / 33.4 20.5 m / 67.2 30.8 m / 101.1 41.1 m / 134.9 61.7 m / 202.5 ET-D75LE4 5.0 8.0:1 min. max. min. 7.1 m / 23.3 11.4 m / 37.3 10.2 m / 33.4 16.3 m / 53.4 20.5 m / 67.3 32.7 m / 107.2 30.8 m / 101.1 49.1 m / 161.0 41.1 m / 134.9 65.5 m / 214.8 61.7 m / 202.5 98.3 m / 322.3 ET-D75LE8 8.0 15.0:1 max. 11.1 m / 36.4 21.1 m / 69.4 16.0 m / 52.5 30.4 m / 99.6 32.4 m / 106.3 61.1 m / 200.4 48.8 m / 160.1 91.8 m / 301.2 65.2 m / 213.9 122.5 m / 401.9 98.0 m / 321.5 184.0 m / 603.5 ET-D75LE5 0.8:1 fixed 1.0 m / 1.5 m / 3.4 4.9
3.1 m / 10.1 4.7 m / 15.3

Projection Range Example

ET-D75LE5 0.8 ET-D75LE1 ET-D75LE2 1.52.0 2.03.0 ET-D75LE3 3.05.0 ET-D75LE4 5.08.0 ET-D75LE8 8.015.0

2m 6.diagonal screen

4m 13.1

6m 19.7

8m 26.2

10 m 32.8

12 m 39.4

14 m 45.9

16 m 52.5

18 m 59.1

20 m 65.6

22 m 72.2

24 m 78.7

26 m 85.3

28 m 91.9

30 m 98.4

4,000:1 Contrast Ratio
Experience the Difference Vivid Colours and Richer Blacks

o faithfully reproduce vivid images with both bright and dark areasthe moon in a night sky, penguins in the snow, pat-
terned animals on a grassy plain you need a projector with high brightness and high contrast. Panasonics solution: the PT-D7700E series.
Featuring Texas Instruments Digital Light Processing and SXGA+ resolution (1,400 x 1,050), the PT-D7700E series delivers outstanding 7,000-lumen brightness and 4,000:1 contrast.* A number of breakthrough Panasonic technologies make this performance possible. Our Dynamic Iris, for example, improves contrast by precisely matching the lamp output to the input signal. Working together with our liquid-cooled optical engine, the Dynamic Iris helps produce images with astonishing definition. The PT-D7700E series also incorporates improvements in reliability and durability. Allowing extended-time operation, these models let you enjoy the superior image quality provided by DLP technology in a wide range of operating environments. With superior brightness, image quality, reliability and extendedtime usability, PT-D7700E models meet a host of applications in auditoriums, conference rooms, control centres and other facilities.
* With the Dynamic Iris set to 3. PT-D7700E-K
Dynamic Iris: Deeper Blacks, Brighter Whites, and Vivid, True-to-Life Colour
Incorporating Panasonic exclusive technology, the Dynamic Iris opens and closes with exceptional speed and precision as the input signal changes, resulting in accurate, real-time control of the light striking the DMD chips. The Dynamic Iris is positioned immediately after the light synthesiser and before the integrator, so it has minimal adverse effect on the overall light uniformity across the screen.

Dynamic Iris

Competitor A Blacks and other dark portions are washed out.
Competitor B Thanks to functions such as lamp power switching, the blacks are not washed out. The white portions, however, become dim and dull.
Dynamic Iris and Dynamic Gamma Dynamic Iris quickly fine-tunes the lamp output with 256-step precision. Dynamic Gamma preserves the brightness in bright portions, helping maintain a wide dynamic range.

Specifications

System Device Pixels Lamp Brightness Contrast ratio Resolution RGB Video Lens Screen size RGB input scanning frequency Component signal DLP system 0.95 (diagonal) DMD (x 3), 4:3 1,470,000 (1,400 x 1,050) x W UHM lamp x 2 (BriteOptic Dual Lamp System) 7000 lumens (dual lamp) 3500 lumens (single lamp) 4000:1 (full white/full black, with dynamic iris set to 3) 1400 x 1050 pixels 560 TV lines Optional diagonal fH kHz, fV Hz, Dot clock 20162 MHz 480i, 576i, 480p, 576p, 720/60p, 1035/60i, 1080/60i,1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p NTSC, PAL, SECAM, M-NTSC, PAL60, PAL-M, PAL-N Optional accessories Replacement lamp unit (single): ET-LAD7700 Replacement lamp unit (set of two lamps): ET-LAD7700W Replacement long-life lamp unit (single): ET-LAD7700L Replacement long-life lamp unit (set of two lamps): ET-LAD7700WL Ceiling mount bracket: ET-PKD75 Low ceiling mount bracket: ET-PKD75S Dual stacking mount bracket: ET-DFD75 Carrying handle: ET-HAD75 Zoom lens (1.52.0:1): ET-D75LE1 Zoom lens (2.03.0:1): ET-D75LE2 Zoom lens (3.05.0:1): ET-D75LE3 Zoom lens (5.08.0:1): ET-D75LE4 Zoom lens (8.015.0:1): ET-D75LE8 Fixed focus lens (0.8:1): ET-D75LE5 DVI board: ET-MD75DV Network board: ET-MD75NT Video/S-Video input board: ET-MD95VM2 SDI (480i/576i) input board: ET-MD95SD1 SDI (480i/576i/480p) input board: ET-MD95SD2 SDI (720p/1035i/1080i/1080-24p) input board: ET-MD95SD3 RGB/YPBPR input board: ET-MD95RGB Wireless mouse receiver: ET-RMRC2 Lamp mode/brightness No. of lamp Lamp power Dual Single High Low High Low Lamp mode/lamp life Lamp mode High Low Lamp life Normal lamp 1,500 hr 2,000 hr Long-life lamp 4,000 hr Brightness Normal lamp 7,000 lm 5,600 lm 3,500 lm 2,800 lm Long-life lamp 3,500 lm 1,750 lm

Video signal

Terminals VIDEO IN BNC VIDEO OUT BNC S-Video IN Mini DIN 4-pin RGB1/YPBPR IN BNC x 5 D-sub HD 15-pin RGB2 IN Optional board slot x 1 D-sub 9-pin female RS-232C/422 IN RS-232C/422 OUT D-sub 9-pin male M3 jack REMOTE 1 IN M3 jack REMOTE 1 OUT D-sub 9-pin female (parallel) REMOTE 2 IN Optical axis shift* Powered; horizontal 30%, vertical 50% Keystone correction range 40 (with ET-D75LE2) Front/rear, ceiling/floor, (menu selecInstallation tion) Power cord length 2.5 m (8.2) 220240 V AC, 50/60 Hz Power supply Power consumption 800 W (800 VA) (15 W during standby mode with fan stopped) Dimensions (W x H x D) 530 x 200 x 540 mm (20-7/8 x 7-7/8 x 21-9/32) (without lens and lens hood) 22.0 kg/48.5 lbs (without lens) Weight Operating temperature 0 40C (32104F) 0 35C (32 95F) (dual lamp, lamp power: high) Operating humidity 10% 80% (no condensation) Supplied accessories Wireless/wired remote control unit Batteries for remote control unit Remote control cable Power cord
Using the long-life lamps, lamp life is 8,000 hours maximum when operated in single lamp mode with the lamp relay function on. Lamp life varies depending on usage conditions and the surrounding environment. When the long-life lamps are used the lamp power mode is automatically set to low.

Dimensions

(22-3/8)

(21-1/4)

Unit: mm (inches)

(1-1/8)

(8-1/4) (4-15/16)

(20-7/8)

(1/16) (6-11/16) (7-1/2) (10-3/8) (4-3/8) (1-1/4) (18-7/16)

(7-7/8)

(3-13/16)
(1-9/16) (1-5/16) (18-3/16) (1-5/16)
USE The brightness of the lamp will gradually decrease with use. The replacement cycle of the lamp will be shortened if the power is frequently turned on and off or the projector is subjected to daily continuous use for 10 or more hours.
* Shift range is limited during simultaneous horizontal

and vertical shifting.

The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.

Weights and dimensions shown are approximate. Specifications are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Digital Light Processing, DLP, DLP logo and the DLP medallion are trademarks of Texas Instruments. VGA and XGA are trademarks of International Business Machines Corporation. All other trademarks are the property of their respective trademark owners. Projection images simulated.
PT-D7700E2-04SEP10K Printed in Japan.

(1-3/4)

PT-D7700E/E-K
3-Chip DLP SXGA+ Projector
The Professional Solution

PT-D7700E-K

4,000:1 Contrast Ratio
Experience the Difference Vivid Colours and Richer Blacks
o faithfully reproduce vivid images with both bright and dark areasthe moon in a night sky, penguins in the snow, pat-
terned animals on a grassy plain you need a projector with high brightness and high contrast. Panasonics solution: the PT-D7700E series. Featuring Texas Instruments Digital Light Processing and SXGA+
resolution (1,400 x 1,050), the PT-D7700E series delivers outstanding 7,000-lumen brightness and 4,000:1 contrast.* A number of breakthrough Panasonic technologies make this performance possible. Our Dynamic Iris, for example, improves contrast by precisely matching the lamp output to the input signal. Working together with our liquid-cooled optical engine, the Dynamic Iris helps produce images with astonishing definition. The PT-D7700E series also incorporates improvements in reliability and durability. Allowing extended-time operation, these models let you enjoy the superior image quality provided by DLP technology in a wide range of operating environments. With superior brightness, image quality, reliability and extendedtime usability, PT-D7700E models meet a host of applications in auditoriums, conference rooms, control centres and other facilities.
* With the Dynamic Iris set to 3.
Dynamic Iris: Deeper Blacks, Brighter Whites, and Vivid, True-to-Life Colour
Incorporating Panasonic exclusive technology, the Dynamic Iris opens and closes with exceptional speed and precision as the input signal changes, resulting in accurate, real-time control of the light striking the DLP chips. The Dynamic Iris is positioned immediately after the light synthesiser and before the integrator, so it has minimal adverse effect on the overall light uniformity across the screen.

Dynamic Iris

Competitor A Blacks and other dark portions are washed out.
Competitor B Thanks to functions such as lamp power switching, the blacks are not washed out. The white portions, however, become dim and dull.
Dynamic Iris and Dynamic Gamma Dynamic Iris quickly fine-tunes the lamp output with 256-step precision. Dynamic Gamma preserves the brightness in bright portions, helping maintain a wide dynamic range.
3-Chip DLP Technology in a Sleek, Compact Body
A Light, Compact, 3-Chip Large-Venue DLP Projector The PT-D7700E series combines a 3-chip system based on DLP technology with a new optical system developed using our exclusive technology. We have dramatically reduced the cabinet size, creating a unit with only one-fifth the size of conventional largevenue 3-chip DLP projectors. With a weight of 22.0 kg (48.5 pounds), the PT-D7700E/E-K can go places other bulky 3-chip projectors with DLP technology have never gone before.
Conventional large-venue DLP projectors
Astounding 4,000:1 Contrast Ratio with Dynamic Iris Panasonics original Dynamic Iris achieves a dramatically improved contrast ratio of 4,000:1 in the PT-D7700E series. Dynamic Iris constantly monitors the input signal, and adjusts the intensity of the light source to match it. This highly advanced function provides high-speed, linear response to changing images with 256-step precision. It also combines with dynamic gamma control to produce deep, rich blacks while preserving the brightness in the lighter portions of dark scenes. The resulting images are bright and vivid, comparable to direct-view TVs and computer monitors. 16-Bit Colour Depth for Film-Like Natural Image Applying 16-bit drive to each of the RGB panels produces 8 times the level of expression (a total of 24 times for all three RGB panels) of conventional 13-bit drive devices. This system creates extremely smooth tonal expression with approx. 65,000 shades of gradation. Progressive Cinema Scan (3/2 Pulldown) This interlace/progressive conversion technology automatically detects when the input signal is derived from filmed material and selects the optimum progressive processing method to assure faithful reproduction of the original image. It is also compatible with the high-definition 1080i format. Dynamic Sharpness Control The Dynamic Sharpness Control circuit adjusts the video signal waveforms based on the difference in the brightness of adjacent pixels for a sharp, clear picture that is relatively unaffected by signal noise.
mance of projectors with DLP technology. Panasonics newly developed liquid-cooling system extends projector performance and attains a high level of reliability.

Cooling liquid Off light

On light
Dust-Resistant Optical Block The dust-resistant design of the optical block helps ensure that 3-chip projectors with DLP technology will continue to deliver crisp, sharp, high-resolution images over an extended service life. Dual Lamp System and Lamp Relay Function The use of two lamp systems increases brightness and eliminates the need to interrupt a presentation if a lamp burns out (in dual lamp operation mode). In single lamp operation mode, the lamp relay function greatly extends continuous operating time. Optional Long-Life Lamp A long-life lamp that stretches lamp life to 4,000 hours is available as an option. In single lamp operation mode, the lamp lamp relay function allows non-stop operation 24 hours a day for up to 47 weeks without replacing the lamps. The use of UHM lamps dramatically cuts operating costs. Easy Lamp Replacement The PT-D7700E series is designed to allow easy lamp replacement with the projector in its fully mounted condition. The lamp itself is the only part that needs to be replaced, which further increases overall reliability. Dust Filter Cleaning The dust filter is easy to clean, and you dont have to make any changes in the projectors mounting condition. This helps to minimise user down time.

PT-D7700E

Superb Image Quality
Image Quality from 3-Chip DLP Technology DLP technology delivers outstanding image resolution. In 3-chip systems with DLP technology considered among the worlds most advanced projector enginesa DLP chip is allocated to each of the red, green, and blue signals. This gives systems with DLP technology superior light utilisation for high brightness, digital processing for low noise and linear white balance, extended device life for minimal image degradation, and a quick response that eliminates afterimages. Powerful 7,000 Lumens In addition to the 300-watt UHM lamp, the PT-D7700E series incorporates digital and optical technologies that maximise the DLP technology advantages. They deliver 7,000 lumens of brightness, offering superior Colour reproducibility.
High Reliability and Easy Maintenance
Liquid-Cooling System In systems with DLP technology, the microscopic mirrors of the DLP chip turn the light Liquid-cooling device on and off. During the off period, light is directed away from the lens. Handling the heat from this light is a major point in maintaining the long-term perfor-
Flexible System Applications
Horizontal/Vertical Lens Shift The PT-D7700E series is equipped with a motor-driven lens shifting function that moves the lens left, right, up, and down. It gives you easy, accurate adjustment when installing the projector. Optical Lenses for Various Venues A wide range of optional lenses with different throw distances are available in addition to the supplied lens. An optional lens with super-long focal lengths (throw ratio of 8.0 to 15.0) is ideal for use in churches or screening rooms. These powered zoom/focus lenses enable the projectors to perform superbly in an array of projection environments, from classrooms to conference rooms. Its a snap to replace the click-in type lenses used in the bayonet system of the PT-D7700E series. Connection Terminals The PT-D7700E/E-K features two RGB inputs, a composite video input and output, and an S-Video input. They also offer RS-232C/422 input and output, two remote inputs, and one remote output.
Built-In Multi-Screen Processor, Colour Matching and Edge Blending M ULTI - SCREEN PROCESSOR The PT-D7700E/E-K can project large, multiscreen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time. C OLOUR MATCHING When several units are used together, this function corrects for slight variations in the Colour reproduction range of individual projectors. The PC software assures easy, accurate control. Independent, 7-axis adjustment (red, green, blue, yellow, magenta, cyan, white) ensures high precision and minimises Colour variations. To simplify the set-up process, you can adjust the projectors before delivering them to the presentation site. The Colour-matching function accommodates up to nine units, for multi-screen or single screen presentation. E DGE BLENDING It controls the brightness at overlapping image edges to assure uniform, natural-looking, multi-screen images. When projecting HD sources with a single projector, part of the DLP chip is unused. In multi-screen projections with two projectors, the DLP chips increase the images horizontal resolution while maximising vertical resolution.

Colour matching Edge blending

Networking (Optional)

Wired LAN System Remote Control The optional interface board ET-MD75NT LAN PC for 10Base-T and Projector e-mail 100Base-TX Internet e-mail PC makes the PC LAN PT-D7700E PC e-mail series networkPC ready. Simply hook the projector up to an existing LAN network for easy remote control and/or monitoring. System administrators will appreciate this feature when using the PT-D7700E/E-K as a fixed-installation projector. Web Browser Control/Monitoring Anybody can operate the PT-D7700E series by remote control or monitor its status over a LAN network, because it is all done using the computers familiar Web browser.
Connection terminals An optional board module can be added for more connection flexibility.
Projector Source Projector
E-Mail Message Alert The PT-D7700E series automatically sends an e-mail message to notify the operator when an error has occurred, or a lamp needs to be replaced, providing an advanced level of maintenance ease and reliability. Controlling and Monitoring Multiple Projectors Panasonics original Multi Projector Monitor & Control* freeware allows the user to control and monitor multiple projectors via LAN. When a problem occurs, an alarm message is sent to the controlling/monitoring PC.
* Available in June 2008. Please consult a sales representative if necessary.
Abundant Optional Interface Boards In addition to the supplied connection terminals, an optional board module can be selected from a total of four boards to match a variety of input source signals, including digital serial component signals. Quiet Operation The PT-D7700E series is designed for quiet operation. A newly developed liquid-cooled optical system and newly designed noisesuppression duct and control system help minimise operating noise. The fan rotation can now be adjusted in finer steps, so fan noise is reduced when rotation adjusts to match room temperature changes. This helps minimise sudden increases in fan noise during operation.
Built-in multi-screen processor
Overlapping image edges Without edge blending

With edge blending

The built-in multi-screen processor enables enlarged multi-screen projection without using any additional special equipment. Colour matching and edge blending make it easier to obtain proper multi-screen picture quality.

More Valuable Features

Mechanical shutter completely blocks light leakage when no image is being projected Momentary switching for RGB/Video input without disrupting the image 96 user memories Wireless/wired remote control unit with wireless mouse function* ID assignment for up to 64 units Coordinated group control for up to 26 groups (A-Z) Picture in picture Wireless/wired remote control (main/sub input
source combinations possible only when using computer and video) Digital vertical keystone correction 3x digital zoom Built-in test pattern Selectable 9-language on-screen menu (English, German, French, Spanish, Italian, Russian, Japanese, Chinese, Korean) Fan control for high elevations (above 1,400 m /4,600 feet)

* Requires the optional ET-RMRC2 wireless mouse receiver
Available in black (PT-D7700E-K) and white (PT-D7700E) cabinet colours.
Ecology-Conscious Design Panasonic works from every angle to minimise environmental impact in the product design, production and delivery processes, and in the performance of the product itself over its life cycle. The PT-D7700E Series reflects the following ecological considerations.
Lead-free solder is used to mount components to the printed circuit boards. Lead-free glass is used for the lens. Lamp power switching further reduces power consumption.
Options for More Flexible Installation

Lenses Boards Lamps

Replacement Lamp Unit ET-LAD7700 Network Board ET-MD77NT Replacement Lamp Units
(Twin pack of ET-LAD7700 lamp units)

Brackets

Ceiling Mount Bracket ET-PKD77H
ET-LAD7700W Replacement Long-Life Lamp Unit ET-LAD7700L

ET-D75LE1

DVI-D/Network Board ET-MD77DV
Replacement Long-Life Lamp Units
(Twin pack of ET-LAD7700L lamp units)
Low Ceiling Mount Bracket ET-PKD75S
ET-LAD7700LW 1.0 1.2:1 Zoom Lens ET-D75LE6 1.5 2.0:1 Zoom Lens ET-D75LE1 2.1 3.1:1 Zoom Lens ET-D75LE2 3.1 5.2:1 Zoom Lens ET-D75LE3 5.2 8.2:1 Zoom Lens ET-D75LE4 8.2 15.4:1 Zoom Lens ET-D75LE8 0.8:1 Fixed-Focus Short-Throw Lens ET-D75LE5 HD-SDI/SD-SDI/Network Board ET-MD77SD3 480i, 576i, 720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p SD-SDI/Network Board ET-MD77SD1 480i, 576i

Receiver

Wireless Mouse Receiver ET-RMRC2 Dual Stacking Mount Bracket ET-DFD75

Handle

Carrying Handle ET-HAD75

Projection Distance

Diagonal image size (aspect ratio: 16:9) ET-D75LE6 1.01.2:1 min. max. 1.4 4.6 2.0 6.6 4.1 13.4 6.2 20.2 8.2 27.0 12.4 40.6 1.7 5.5 2.4 7.9 4.9 16.0 7.4 24.2 9.8 32.3 14.8 48.6 ET-D75LE1 1.52.0:1 min. max. 2.1 6.8 3.0 9.8 6.1 19.9 9.1 29.9 12.2 40.0 18.3 60.1 2.8 9.0 4.0 13.1 8.1 26.5 12.2 40.0 16.3 53.4 24.5 80.7 Distance to screen ET-D75LE2 2.03.0:1 min. max. 2.8 9.2 4.0 13.2 8.2 26.7 12.3 40.2 16.4 53.7 24.6 80.7 4.2 13.8 6.1 19.9 12.2 40.1 18.4 60.4 24.6 80.6 36.9 121.1 ET-D75LE3 3.05.0:1 min. max. 4.2 13.9 6.1 19.9 12.3 40.2 18.4 60.4 24.6 80.7 36.9 121.1 7.1 23.3 10.2 33.4 20.5 67.2 30.8 101.1 41.1 134.9 61.7 202.5 ET-D75LE4 5.08.0:1 min. max. 7.1 23.3 10.2 33.4 20.5 67.3 30.8 101.1 41.1 134.9 61.7 202.5 11.4 37.3 16.3 53.4 32.7 107.2 49.1 161.0 65.5 214.8 98.3 322.3 ET-D75LE8 8.015.0:1 min. max. 11.1 36.4 16.0 52.5 32.4 106.3 48.8 160.1 65.2 213.9 98.0 321.5 21.1 69.4 30.4 99.6 61.1 200.4 91.8 301.2 122.5 401.9 184.0 603.5 ET-D75LE5 0.8:1 fixed 1.0 3.4 1.5 4.9 3.1 10.1 4.7 15.3

meters feet

400 600
1.8 5.8 2.5 8.3 5.1 16.7 7.6 25.0 10.2 33.3 15.2 50.0

Projection Range Example

ET-D75LE5 ET-D75LE6 ET-D75LE1 ET-D75LE2 0.8 1.01.2 1.52.0 2.03.0 ET-D75LE3 3.05.0 ET-D75LE4 5.08.0 ET-D75LE8 8.015.0

2m 6.diagonal screen

4m 13.1

6m 19.7

8m 26.2

10 m 32.8

12 m 39.4

14 m 45.9

16 m 52.5

18 m 59.1

20 m 65.6

22 m 72.2

24 m 78.7

26 m 85.3

28 m 91.9

30 m 98.4

Specifications
System Device Pixels Lamp Brightness*1 Contrast ratio*1 Resolution Lens Screen size 1,400 x 1,050 pixels*2 Optional diagonal diagonal, 4:3 aspect ratio with the ET-D75LE5 DLP projection system 0.95 (diagonal) DLP chip (x 3), 4:3 1,470,000 (1,400 x 1,050) x W UHM lamp x 2 (BriteOptic Dual Lamp System) 7,000 lumens (dual lamp) 3,500 lumens (single lamp) 4,000:1 (full white/full black, with dynamic iris set to 3) Supplied accessories Wireless/wired remote control unit Batteries for remote control unit Remote control cable Power cord Optional accessories Replacement lamp unit (single): ET-LAD7700 Replacement lamp unit (set of two lamps): ET-LAD7700W Replacement long-life lamp unit (single): ET-LAD7700L Replacement long-life lamp unit (set of two lamps): ET-LAD7700LW Ceiling mount bracket: ET-PKD77H Low ceiling mount bracket: ET-PKD75S Dual stacking mount bracket: ET-DFD75 Carrying handle: ET-HAD75 Zoom lens (1.01.2:1): ET-D75LE6 Zoom lens (1.5 2.0:1): ET-D75LE1 Zoom lens (2.0 3.0:1): ET-D75LE2 Zoom lens (3.0 5.0:1): ET-D75LE3 Zoom lens (5.0 8.0:1): ET-D75LE4 Zoom lens (8.015.0:1): ET-D75LE8 Fixed focus lens (0.8:1): ET-D75LE5 Network board: ET-MD77NT DVI-D/network board: ET-MD77DV SD-SDI/network board: ET-MD77SD1 (480i, 576i) HD-SDI/SD-SDI/network board: ET-MD77SD3 (480i, 576i, 720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p) Wireless mouse receiver: ET-RMRC2 Lamp mode/brightness
No. of lamp Dual Single Lamp power High Low High Low Brightness Normal lamp 7,000 lm 5,600 lm 3,500 lm 2,800 lm Long-life lamp 3,500 lm 1,750 lm

Lamp mode/lamp life

Lamp mode High Low Lamp life Normal lamp 1,500 hr 2,000 hr Long-life lamp 4,000 hr

200 (7-7/8)

170 (6-11/16)
1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. 2: Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels. 3: Shift range is limited during simultaneous horizontal and vertical shifting. 4: Vertical 60% with the ET-D75LE6. 5: Average value. May differ depending on models.

97 (3-13/16)

6 (1/4)

40 (1-9/16)

34 (1-5/16)

462 (18-3/16)

32 (1-1/4)

468 (18-7/16)

blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. 4. If the projector is to be operated continuously 24 hours a day, use the dual-lamps optical systems alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per day if the using the dual-lamp mode. 5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. The brightness of the lamp will gradually decrease with use. 6. Because the ET-D75LE5 is a fixed short-throw lens, the lens shift function cannot be used with it. 7. When the ET-D75LE6 is mounted to the PT-D7700 or PT-DW7000, the lens cover that is included with the projector cannot be used as is. Please use the lens cover that is included with the ET-D75LE6.
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions. Never place objects on top of the projector while it is operation. Make sure there is an unobstructed space of 500 mm or more around the projectors exhaust openings. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector is between 0C and 35C. Also make sure the projectors intake and exhaust openings are not

Projectors Global Web Site: http://panasonic.net/pavc/projector/
Please contact Panasonic or your dealer for a demonstration.
Weights and dimensions shown are approximate. Specifications are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. DLP and the DLP logo are registered trademarks of Texas Instruments. An application has been filed for trademark rights, or trademark rights have been granted, for PJLink in Japan, the United States of America and other countries and areas. VGA and XGA are trademarks of International Business Machines Corporation. All other trademarks are the property of their respective trademark owners.Projection images simulated. (C) 2006 Panasonic Projector Systems Company is a Unit Company of Panasonic Corporation of North America. All rights reserved. (C) 2006 Matsushita Electric Industrial Co, Ltd. All rights reserved.
All information included here is valid as of June 2008.
PT-D7700E5-08JUN20K Printed in Japan.

44 (1-3/4)

111 (4-3/8)
RGB input scanning fH kHz, fV Hz, frequency Dot clock 20162 MHz Component signal 480i, 576i, 480p, 576p, 720/60p, 1035/60i, 1080/60i,1080/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p NTSC, PAL, SECAM, M-NTSC, PAL60, Video signal PAL-M, PAL-N Terminals BNC VIDEO IN BNC VIDEO OUT Mini DIN 4-pin S-Video IN BNC x 5 RGB1/YPBPR IN D-sub HD 15-pin RGB2 IN Optional board slot x 1 D-sub 9-pin female RS-232C/422 IN RS-232C/422 OUT D-sub 9-pin male M3 jack REMOTE 1 IN M3 jack REMOTE 1 OUT D-sub 9-pin female (parallel) REMOTE 2 IN 3 Powered; horizontal 30%*4, vertical Lens shift* 50%*4 Keystone correction range 40 with ET-D75LEwith ET-D75LEwith ET-D75LE6 Front/rear, ceiling/floor, (menu selecInstallation tion) Power cord length 2.5 m (8.2) 220240 V AC, 50/60 Hz Power supply Power consumption 800 W (800 VA) (15 W during standby mode with fan stopped) Dimensions (W x H x D) 530 x 200 x 540 mm (20-7/8 x 7-7/8 x 21-9/32) (without lens and lens hood) 5 Approx. 22.0 kg/48.5 lbs (without lens) Weight* Operating temperature 0 40C (32104F) 0 35C (32 95F) (dual lamp, lamp power: high) Operating humidity 10% 80% (no condensation)
NOTE The above value is the maximum lifetime when all two lamps are replaced simultaneously, and used in operating cycles of 3.5 hours on and 0.5 hour off. If the ON/OFF frequency increases, the lamp replacement cycle will be shortened. (It is recommended that the mechanical shutter be used to turn off the image for short periods.) Using the long-life lamps, lamp life is 8,000 hours maximum when operated in single lamp mode with the lamp relay function on. Lamp life varies depending on usage conditions and the surrounding environment. When the long-life lamps are used the lamp power mode is automatically set to low.