Preliminary

as of February 2009.
PT-DZ6710 PT-DZ6700 PT-DW6300S PT-D6000S

Available from April

DLP-Based Projector
Models without lenses (PT-DZ6710L/DZ6700L/ DW6300LS/D6000LS) are also available.
Refined Image Quality with System Expandability
New Standard for 1-chip DLP Projectors
6,500-lm brightness and versatile functions for high reliability

PT-DW6300S PT-D6000S

6000 lm 6500 lm

WXGA XGA

*Black models are available as built-to-order.
High-resolution WUXGA and excellent application flexibility

PT-DZ6710 PT-DZ6700

Vivid Picture Quality with High Brightness
RGB Booster significantly improves color reproduction while maintaining high brightness. High-resolution WUXGA*1 allows compatibility with a wide range of signals. Detail Clarity Processor realistically reproduces even fine textures. System Daylight View 2 produces sharp, crisp images even in bright lighting.
*1 PT-DZ6710/DZ6700. *2 PT-DZ6710 only.

6000 lm 6000 lm

WUXGA WUXGA

Geometric Adjustment

HD-SDI
Easy Maintenance and Superior Reliability
Auto Cleaning Filter reduces maintenance hassles for 10,000 hours. Dual Lamp System prevents image interruptions even if a lamp burns out. Liquid Cooling System allows use in ambient temperatures as high as 45C. Sealed Optical Block prevents the adverse effects caused by dust for greater operating stability.
System Integration Flexibility
Geometric Adjustment*2 corrects images that are projected onto a curved screen. The Multi-Screen Support System seamlessly connects multiple images. Flexible 360 Installation in the vertical direction for creative applications. Powered Vertical/Horizontal Lens Shift Function increases installation flexibility. Optional Lenses covers a wide range of projection distances.

Specifications

Models
Power supply Power consumption DLP chip Panel size Display method Pixels Lens Lamp Screen size Brightness*3 Center-to-corner uniformity*3 Contrast*3 Resolution Scanning RGB frequency YPBPR (YCBCR) S-Video/Video Optical axis shift Keystone correction range Installation Other features Terminals DVI-D IN RGB 1/YPBPR IN RGB 2/YPBPR IN VIDEO IN S-VIDEO IN SERIAL IN SERIAL OUT REMOTE 1 IN REMOTE 1 OUT REMOTE 2 IN LAN HD-SDI*4 Power cord length Cabinet material Dimensions (W x H x D) Weight*5 Operating temperature Operating humidity Supplied accessories

PT-DZ6710

PT-DZ6700

PT-DW6300

PT-D6000
North America: 120V AC 60Hz Europe, Asia: 220-240V AC, 50/60Hz North America: 820W or less, Standby mode eco: 0.2W Standby mode normal: 8 W (Both with fan stopped)*1 Europe, Asia: 800 W or less, Standby mode eco: 0.3W Standby mode normal: 9 W (Both with fan stopped)*1 0.67 diagonal (16:10 aspect ratio) 0.65 diagonal (16:10 aspect ratio) 0.7 diagonal (4:3 aspect ratio) DLP chip x 1, DLP system 2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels 1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels 786,432 (1,024 x 768) x 1, total of 786,432 pixels Powered zoom/focus lenses (1.8 2.4:1), F 1.7 2.0, f 26.8 35.7 mm Powered zoom/focus lenses (1.8 2.4:1), F 1.7 2.0, f 25.633.8 mm 300 W UHM lamps (x 2) (dual lamp system) inches (50200 inches with the ET-DLE055), inches (50200 inches with the ET-DLE055), 16:10 aspect ratio 4:3 aspect ratio 6,500 lumens (dual lamp, high power mode) 6,000 lumens (dual lamp, high power mode) 90% 2,000:1 (full on/full off, contrast mode: high)*2 1,920 x 1,200 pixels 1,024 x 768 pixels 1,280 x 800 pixels Horizontal: 1591 kHz, Vertical: Hz, Dot clock: 162 MHz or lower Horizontal: kHz, Vertical: Hz, Dot clock: 150 MHz or lower 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 125 (1080)/60i, 1125 (1080)/50i, 1080/24p, 1080/25p, 1080/30p, 1080/24sF, 1080/60p, 1080/50p Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz, (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM) Vertical: +50% (powered), horizontal: 10% (powered) Vertical: +60% (powered), horizontal: 10% (powered) Vertical: +50% (powered), horizontal: 10% (powered) Vertical: 30 Ceiling/floor, front/rear Multi-Screen Support System, Geometric Adjustment Multi-Screen Support System DVI-D 24-pin BNC x 5 D-sub HD 15-pin BNC Mini DIN 4-pin D-sub 9-pin x 1 (RS-232C compliant) D-sub 9-pin M3 jack M3 jack D-sub 9-pin RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink BNC x 1 3.0 m (910) Molded plastic 498 mm x 175 mm x 423 mm Approx. 16.0 kg (35.3 lbs) 045C (32113F) 20%80% (no condensation) Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope

*1 During eco stand-by mode operation, network functions such as standby-on from a LAN network and the serial output terminal will not operate. *2 Brightness: 3,000 lumens (PT-DZ6710/DZ6700/DW6300), 3,250 lumens (PT-D6000). *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 SD-SDI is also supported. *5 Average value. May differ depending on models.

Optional accessories

Lens Zoom lens ET-DLE150
1.3 1.9:1 (PT-DZ6710/DZ6700) 1.4 2.0:1 (PT-DW6300) 1.3 2.0:1 (PT-D6000)

NOTES ON USE

Replacement lamp unit ET-LAD60 ET-LAD60W (twin pack)
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3. The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions. Never place objects on top of the projector while it is operation. Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating atone time and the other unit is used as a backup. If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0 C and 40 C. Also make sure the projector's intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. * Even when the ambient temperature near the intake opening is 40 C/104 F or lower, an accumulation of hot air inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions. 4. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system's alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time per day if the using the dual-lamp mode. 5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. The brightness of the lamp will gradually decrease with use.

Zoom lens ET-DLE250

2.3 3.6:1 (PT-DZ6710/DZ6700) 2.4 3.8:1 (PT-DW6300) 2.4 3.7:1 (PT-D6000)
Filter Replacement filter unit ET-ACF100

Zoom lens ET-DLE350

3.6 5.4:1 (PT-DZ6710/DZ6700) 3.8 5.7:1 (PT-DW6300) 3.7 5.6:1 (PT-D6000)
Ceiling mount bracket ET-PKD56H (for high ceilings) ET-PKD55S (for low ceilings)

Zoom lens ET-DLE450

5.4 8.6:1 (PT-DZ6710/DZ6700) 5.6 9.0:1 (PT-DW6300) 5.5 8.9:1 (PT-D6000)

ET-PKD55S

Please visit our website for more information.

ET-PKD56H

Fixed focus lens ET-DLE055
http://panasonic.net/avc/projector

Search

panasonic projector global
Please contact Panasonic or your dealer for a demonstration.

JQA-1617

EC98J2010
Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export regulations. An application has been filed for trademark rights, or trademark rights have been granted, for PJLink in Japan, United States of America and other countries and area. VGA and XGA are trademarks of International Business Machines Corporation. All other trademarks are the property of their respective trademark owners. Projection Images simulated. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. (C) 2009 Panasonic Corporation All rights reserved.
All information included here is valid as of February 2009.
PT-D6000series-09February10K Printed in Japan.