PT-FW100NTU PT-F100NTU PT-F100U

LCD Projectors

P R E L I M I N A R Y

Long-Lasting Brightness

Fo ss r Cla room s

Ro eting

Panasonics new permanent-installation LCD projectors PT-FW100NTU, PT-F100NTU, and PT-F100U feature Panasonics advanced Auto Rolling Filter (ARF) and lamp drive technologies for longer-lasting performance. The result is a line of projectors that maintain superior brightness. Functions like Lens Shift and the 2x zoom also make the projectors easy to use when mounted to a ceiling or placed on a shelf. These high-performance models are perfect for either new or replacement projector use.

made in

Model Resolution Brightness Market Introduction
PT-FW100NTU 1,280 x 800 (WXGA) 3,000 lumens Q3 07
PT-F100NTU 1,024 x 768 3,200 lumens Q2 07
PT-F100U 1,024 x 768 3,200 lumens Q2 07
Auto Rolling Filter (ARF) The PT- PT-FW100NTU, PT-F100NTU, and PT-F100U automatically detect when dust accumulates on the high-efficiency electrostatic filter and impairs performance. The affected section of the filter is wound into the casing, and an unused filter material is automatically put in the airflow path so top filtering performance is continually maintained. The Auto Rolling Filter combines with a totally re-engineered airflow path and a hermetic, dust-free optical system design to ensure that the projector is always clean. This ARF unit featuring the electrostatic filter (Photo shows a prototype. The appearance may differ minimizes any brightness loss from the unit that is actually built into the model.) due to dust accumulation.
Advanced technologies help maintain superior brightness Auto Rolling Filter (ARF) and dust resistant design Panasonics new lamp drive system for optimal lamp performance aylight View 3 Technology enhances sensory brightness D and contrast* Wide screen*2 and wireless functions for greater versatility Wide aspect-ratio screen with Side-by-Side viewing function* Easy wireless projection with multiple PC connection Convenient features for fixed installation Horizontal and Vertical lens shift and 2x zoom for flexible installation A 100-inch image can be projected from distances between 2.9 m/9.5 feet and
5.7m/18.7 feet with the PT-FW100NT, and between 3.0 m/9.8 feet and 6.0 m/19.7 feet with the PT-F100NT.
ired LAN: Web browser control/monitoring, email message alert W and PJLink compatibility Direct power off Easy lamp replacement from the rear Abundant connection terminals Easy-to-use remote control with laser pointer Closed Caption Decoder built into the projector
There is no actual change in the rated brightness or contrast ratio. For the PT-FW100NTU only.
PPD507_FSeries_FRONT_SS.indd 1

3/13/07 11:15:31 AM

Specifications (Tentative)
Power supply Power consumption LCD panel Panel size PT-FW100NTU PT-F100NTU/ PT-F100U Display method Drive method Pixels PT-FW100NTU 100-240 V AC, 50/60 Hz 360 W (Approx. 4 W in standby mode with fan stopped) 0.74" (18.8 mm) diagonal (16:10 aspect ratio) 0.7" (17.78 mm) diagonal (4:3 aspect ratio) Transparent LCD panel (x 3, R/G/B) Active matrix Optical axis shift PT-FW100NTU PT-F100NTU/ PT-F100U Keystone correction range On-screen menu
Specifications may change without prior notice. Vertical: 51%, horizontal: 24% Vertical: 50%, horizontal: 32% Vertical: languages: English, French, German, Spanish, Italian, Korean, Russian, Chinese, Japanese, Swedish, Norwegian, Danish, Portuguese, Polish, Hungarian, Czech, and Thai Front/rear ceiling/desk (menu selection) 4 cm (round), x 1, 3.0 W (monaural) output power Wireless remote control unit 3 V DC (AA battery x 2) Power supply Operation range* 3 Approx. 10 m (32.8 feet) when operated from directly in front of the signal receptor Dimensions (W x H x D) 48 x 163 x 24.5 mm (1-7/8" x 6-13/32" x 31/32") Weight 145 g (5.1 oz) (including batteries) Wireless LAN Standard Transmission IEEE802.11b IEEE802.11g
1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels PT-F100NTU/ 786,432 (1,024 x 768) x 3, PT-F100U total of 2,359,296 pixels Pixel configuration Stripe Manual zoom (1:1-1:2), manual Lens focus, F 1.7-2.6, f 21.6-43.0 mm 250 W UHM lamp Lamp 33-300 inches/838-7,620 mm Projection size diagonally (16:10 aspect ratio) Full color (16,777,216 colors) Colors Brightness 3,000 lumens PT-FW100NTU 3,200 lumens PT-F100NTU/ PT-F100U 1,280 x 800 pixels (1,600 x 1,200 Resolution (RGB) pixels with compression) PT-FW100NTU 1,024 x 768 pixels (1,600 x 1,200 PT-F100NTU/ PT-F100U pixels with compression) Scanning frequency Horizontal: 15-91 kHz, RGB Vertical: 50-85 Hz 480i (525i): fH 15.75 kHz; fV 60 Hz YPBPR 576i (625i): fH 15.63 kHz; fV 50 Hz 480p (525p): fH 31.5 kHz; fV 60 Hz 576p (625p): fH 31.25 kHz; fV 50 Hz 720/60p (750/60p): fH 45 kHz; fV 60 Hz 1080/60i (1125/60i): fH 33.75 kHz; fV 60 Hz 1080/50i (1125/50i): fH 28.125 kHz; fV 50 Hz S-Video/Video NTSC, NTSC4.43, PAL-M, PAL60: fH 15.75 kHz; fV 60 Hz PAL, SECAM, PAL-N: fH 15.63 kHz; fV 50 Hz Throw distance PT-FW100NTU 1.1 m-17.2 m (3'7"-56'5") (16:10) PT-F100NTU/ 1.2 m-18.1 m (3'11"-59'4") (4:3) PT-F100U

Installation Built-in speakers Terminals COMPUTER 1 IN
IEEE802.11b/g Direct sequence spread spectrum (DSSS) system Orthogonal frequency division multi-plex (OFDM) system
D-sub HD 15-pin x 1 R, G, B: 0.7 Vp-p, 75 ohms, Sync on green: 1.0 Vp-p, 75 ohms HD/SYNC, VD: TTL (positive/negative polarity compatible) COMPUTER 2 IN/COMPUTER 1 OUT D-sub HD 15-pin x 1 (input/output selectable using on-screen menu) R, G, B: 0.7 Vp-p, 75 ohms, Sync on green: 1.0 Vp-p, 75 ohms HD/SYNC, VD: TTL (positive/negative polarity compatible) COMPONENT IN RCA pin x 3, Y: 1.0 Vp-p (including sync signal), 75 ohms; PB/CB, PR/CR: 0.7 Vp-p, 75 ohms VIDEO IN RCA pin x 1, 1.0 Vp-p, 75 ohms S-VIDEO IN Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms AUDIO IN (COMPUTER 1) M3 (stereo) x 1, 0.5 Vrms AUDIO IN (COMPUTER 2) M3 (stereo) x 1, 0.5 Vrms AUDIO IN (COMPONENT/VIDEO/S-VIDEO) RCA pin (L, R) x 1, 0.5 Vrms AUDIO OUT M3 (stereo) x 1, 0 - 2.0 Vrms (variable) SERIAL D-sub 9-pin x 1 (RS-232C) REMOTE D-sub 9-pin x 1 LAN RJ-45 x 1, 10BASE-T/100BASE-TX/1000BASE-T Power cord length 2 m (6'7") Cabinet material Molded plastic (ABS/PC) Dimensions (W x H x D)* x 124.5 x 319 mm (17" x 4-29/32" x 12-9/16") Weight 6.2 kg (13.7 lbs.) Operating environment Temperature 0-40C (32-104F) Humidity 20%-80% (no condensation)
Modulation system IEEE802.11b CCK (11/5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) IEEE802.11g 64-QAM (54/48 Mbps), 16-QAM (36/24 Mbps), QPSK (18/12 Mbps), BPSK (9/6 Mbps) Transmission speed IEEE 802.11b 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps IEEE 802.11g 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps 3 Operation range* Approx. 30 m (98'5") Frequency range PT-FW100NTE/FW100NTEA/F100NTE/F100NTEA 2,412 MHz-2,472 MHz PT-FW100NTU/F100NTU Channels 2,412 MHz-2,462 MHz PT-FW100NTE/FW100NTEA/F100NTE/F100NTEA 1-13 ch PT-FW100NTU/F100NTU 1-11 ch Supplied Accessories Power cord Wireless remote control Batteries for remote control Wireless Manager ME 4.0 (CD-ROM) Safety wire rope Optional Accessories ET-LAF100 Replacement lamp unit ET-RFF100 Replacement filter unit ET-PKF100H Ceiling mount bracket for high ceilings ET-PKF100S Ceiling mount bracket for low ceilings
*1: In AI mode. *2: Including protruding parts. *3: Operation range differs depending on the environment.
To use wireless functions, a PC is required that meets the conditions given below: OS: Microsoft Windows 2000 Professional, Windows XP Professional, Windows XP Home Edition CPU: Intel Pentium III or higher, or other compatible processor (1 GHz or higher is recommended) Memory: 256 MB or more Free hard disk space: 60 MB or more CD-ROM drive: CD-ROM drive or DVD drive Wireless LAN: IEEE 802.11b/g compatible (Built-in wireless LAN system or external IEEE 802.11b/g LAN card must be installed and running normally.)

NOTE: Some IEEE 802.11g/b wireless LAN may not allow connection to the projector.
The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. The brightness of the lamp will gradually decrease with use. The projector includes consumable parts. The frequency of replacement for the lamp and other consumable parts will increase if the projector is subjected to extended, continuous use. For details, please consult a service representative.
Wired LAN connector: RJ-45
NOTE: Use Category 5e (or higher) cables for 1000BASE-T connection.
Projectors Global Web Site http://panasonic.co.jp/pavc/global/projector
Weights and dimensions shown are approximate. Specifications are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric Industrial Co., Ltd. Intel and Pentium are registered trademarks of Intel Corporation. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective trademark owners.
PPD507_FSeries__Back_SS.indd 1

3/13/07 11:12:49 AM