Reviews & Opinions
Independent and trusted. Read before buy Panasonic SA-AK12!

Panasonic SA-AK12 Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic SA-AK12, size: 1.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Panasonic SA-AK12About Panasonic SA-AK12
Here you can find all about Panasonic SA-AK12 like manual and other informations. For example: .

Panasonic SA-AK12 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic SA-AK12 please write about it to help other people.
[ Report abuse or wrong photo | Share your Panasonic SA-AK12 photo ]

User reviews and opinions

Comments to date: 6. Page 1 of 1. Average Rating:
meinbress 11:06pm on Sunday, October 31st, 2010 
good picture brakes after 3 months beautiful top class picture at a decent price. Shipping arrangement a little difficult but worth it... FREE Vivid,outstanding, best buy ever Watching more TV these days
JackyWan 4:57am on Friday, August 27th, 2010 
I got this set from Amazon for a very reasonable price. They sent it via white-glove delivery service right into my family room. Overall this is an above average tv that I would recommend to anyone looking to by a 42" plasma tv. It is very thin and easy to set up.
Wan 1:06am on Friday, July 2nd, 2010 
For a $3000.00 TV, this should have lasted far longer. One day just would not turn on, power indicator flashing 10 times. Great picture for 58 inch which are hard to f...  great picture for 720, nice hd. you need a good hd signal though broke after 3 years.
Sfagnum 8:23pm on Friday, June 18th, 2010 
Panasonic TH-50PX60B - Excellent Value I have had this Plasma TV for over 2 years. Panasonic Purple Snakes I have read the reviews about the screen and after owning it for 4 months I have to say I am not altogether happy with it.
fernin8r 8:13am on Tuesday, May 25th, 2010 
Great picture for 58 inch which are hard to find in plasma, cost too high for 720 picture. Great TV and a great value. At the time a I ...  Owned the unit for approximately 18 months with not a single issue.
naxfen 8:18am on Saturday, May 1st, 2010 
I have had this tv for 5 months and only been able to use it for 3 of the five, the other two waiting on Panasonic to fox it. After much research, this was my pick. Crisp, clear, razor sharp picture. Controler could be larger, small keys hard to see in dim light.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Using the built-in sound quality/ sound field settings.. Enhancing the sound quality.. Boosting the super woofer.. Varying the sound quality with the manual equalizer.. Varying the sound quality with the acoustic image (AI) equalizer..
Using the timer.. 27 Usingthe play/record timer.. 27 Usingthe sleep timer... 29
Using an external unit.. 29 Troubleshooting guide.. 30 Maintenance... 30 Servicenter List (U.S.A.).. 31 Specifications... Back Cover Product Service.. Back Cover


AM loop antenna (RSA0029.L).

[] 1 pc.

Battedes. 2 pcs. (R6, AA, UM-3)
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electdc shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Remote cenh'ol transmitter... SC-AK44: (N2QAGB00OO04) SC-AK33, SC-AK22, SC-AK12: (Silver: N2QAGB000002) (Black: N2QAGBO00010)


Before using this unit please read these operating instructions carefully. Take special care to follow the warnings indicated on the unit itself as well as the safety suggestions listed below. AffenNards keep them handy for future reference.
Heat--The unit should be situated away from heat sources such as radiators and the like. It also should not be placed in temperatures less than 5C (41F) or greater than 35C (95F).
Condensation--Moisture may form on the lens in the following conditions. immediately after a heater has been tumeq on. in a steamy or very humid room. ewhen the unit is suddenly moved from a cold environment to a warm one. If moisture forms inside this unit, it may not operate properly. To correct this problem, turn on the power and wait about one hour for the moisture to evaporate.
1. Power Source --The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit. 2. Polarization--If the unit is equipped with a polarized AC power plug (a plug having one blade wider than the other), that plug will fit into the AC outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 3. Power Cord Protection--AC power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Never take hold of the plug or cord if your hand is wet, and always grasp the plug body when connecting or disconnecting it. 4. Nonuse Periods--When the unit is not used, turn the power off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet.

Auto tuning

stopping when it[TUNE/TIME ADJ (V) or (A)] for a moment until the Press end hold finds a station. To cancel auto tuning, press when there is excessive auto frequency starts changing rapidly. The unit begins or (A)]tuning, Auto tuning may not function [TUNFJTtME ADJ (V) interference. once again.
If noise is excessive in FM
broadcasts will be heard in monaural.

__ V'<_nME_

Press [ [ I<1</<_ FM MODE/BP] to if receptionthe is weak, but Press t<1<1/41<1 FM sound again to cancel mode. This mode improves MODE/BP]quality display "MONO". "MONO" goes out. MONO is also canceled if the frequency is changed. Turn off "MONO" for normal listening. Stereo and monaural broadcasts are automatically played as they are received.

I FM allomtlon selling

_, _ '_. '
_-"+-:_-_-_ : " F_I
. "_ "_. t __.__
broadcasts allocated in 0.1 MHz steps. By adjusting the allocation, you can enable this tuner to receive FM Press and hold [TUNER, BAND]. After a few seconds, the display will change to a flashing display of the current minimum FM frequency. If you continue to hold the button down, the minimum frequency will change. Releasethebuttonatthisfime. To return to the onginal frequency indication, repeat above.


After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. Sound is momentadly interrupted if you load/unload tapes while listening to an AM broadcast.
Presetting. racllo broadCo+its" !
There are two methods of praseffing stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 12 stations each can be set in the FM and AM bands.

Automatic presetting

Do the following once each for FM and AM. Preparation: Tune to the frequency where presetting is to begin (-_ page 12). Press and hold [MEMORY b,.ll_/Ib.lb4 ]. Release the button when frequency begins to change. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in.


Presetthe stationsoneat a time.
_) Press [TUNER, BAND] to select the "FM" or "AM". Press [MEMORY I=,4_/b,-I_ ] then press [TUNE/TIME ADJ (V) or (A)] to tune to the required station. _) Press [MEMORY IM_tIH_I ] then press [TUNE/TIME ADJ (V) or (A)] to tune to select a channel Press [MEMORY IH_/IIHH ]. The station occupying a channel is erased if another station is preset in that channel.

Selecting channels

ii_ i i L.II_+lill Ili]
ress [TUNER] to select "FM" The unit comes on automatically. Every time you press the button: FM <->AM

or "AM".



+, +,
ress the numbered To select channel 10 or buttons over Press [_>10]then the two digits.

to select

the channel.


Adjust the volume.

On the main unit

Preset channel I
(_ Press [TUNER, BAND] to select "FM" or "AM". Press [11, TUNE MODE] to select "PRESET". Press [TUNE/TIME ADJ (V) or (^)] to select the preset channel.

,,+ EH ;

Concerning compact discs
With this system, you can only play compact discs having this mark. [] However, do not use irregular shaped COs. CDs of the soft can damage the unit. DIGITAL AUDIO

ow to hold CDs


Handling precautions

If you are taking the disc from a cold to a warm environment, moisture may form on the disc. Wipe this off with a soft, dry, Hint-free cloth before using the disc. Do not write on the label side with a ball-point pen or other writing instrument. Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. Do not attach labels or stickers to CDs. (Do not use CDs with exposed adhesive from tape or left over peeled off stickers.) Do not use scratch-proof protectors or covers other than those specified for use with this system. Do not use CDs printed with label printers available on the market.
Storage Do not touch the recorded


Wipe from inside outward.
Be sure to store discs in their cases to protect them from dust, scratches, and warping. Do not place or store discs in the following pieces Locations exposed to direct sunlight Humid or dusty locations Locations directly exposed to a heat vent or heating appliance In the glove compartment or on the rear deck of an automobile

ITo prevent damage

Always observe the following points. [] Load only 1 CD on the tray. [] Load CDs as shown in the figure. The adapter is not needed with 8cm CDs (singles). Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. Do not move the system while tray is opening/closing, loaded. or when

To cancel random play Press [RANDOM] to clear "RANDOM" d=splay


You can use random play with your program Only the programmed tracks wdl be played, but in random order


to oml_ct_[S_

_"-" -"


I l | I[oj |l]I

You can program up to 24 tracks
Press [CD]. EnsureCD _sstopped Press [PROGRAM], Press [DISC].
(within 10 seconds or so) Press [1] - [5] to select the disc you want,
Press the numeric through to []select the desired track. button Repeat steps [] until you have progremmed all the tracks you want.
Play wdl start in the programmed sequence
To cancel program play mode Press [PROGRAM] In the stop mode. Programmed contents will be saved in memory [] Press L]l_//k]. Pressing Ill/CLEAR] will cancel program play, but rt will also erase the ent=re program To select a two-digit track Press [->10] and then the two numbers you want [] When "CD FULL" appears The number of programmed tracks can be programmed [] tracks is hmded to 24 No further
You can do the following dunng program mode Check program contents Press [P<l_/<l_l] or [b,4_,41,,4_1] Every brae you press one of the buttons, the track and program No are shown on the display Add to the program Repeat steps [] through [] Cancel entnes From the last programmed track A specified track only Press [CANCEL]
Select the track wTth[l_P</<_i] or [IIHI_,,II,.I_], and press [CANCEL] w_tn 3 seconds Press [I/CLEAR]

All tracks

Memory retention Your program is retained in memory for about 2 weeks while the system is unplugged

. ;.--4-----,:----;-;--I

[nd_cates !

-- l _

I'" U L L
To replay your program If you turned OFF your program with [PROGRAM], again as explained below 1 Press [PROGRAM] 2 Press [I_/A]

you can play it

If you program a track not on your CDs The track =sinitially programmed, but dunng program play, the player will skip that track and will continue playing from the next programmed item


fO compact
Thts function makes it easter for you to select spec_l CDs and tracks from amongst those loaded m the player You can use this function to make recordtngs as well There are 3 CD/treck selection modes.

Press [TAPE, DECK 1/2]. The unit will come on automatically. If the unit was off and a cassette was leaded, play will start automatically (One touch play function)
ress [--_ DECK 1 OPEN] or [_- DECK 2 OPEN] insert the tape, Insert the tape with the exposed taps facing down, Close the holder by hand.

Front side

Every time you press the button:

__... I _.)

: One side is played. : Both sides are played. ,
To listen to 2 tapes consecutively
: Both sides are played 8 times each.
:_! I.. _ /. Ii ' "_ t f

[1_] [</11]

: The forward side (front side) will play : The reverse side will play.

i| _ _

k._J _

Tape direction J

One side is played, then playback stops automatically. Press []1_] to start playback. To play on the other side of the tape, tum the tape over and
To stop tape playback Press [111. [] TO change the deck to be used Press [TAPE, DECK 1/2] to select the deck you want to use when you load cassettes into both peck.
Playback is momentadly interrupted while playing back tapes, if you open the other deck. Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. Tape slack can get caught up in the mechanism and should be taken up before the tape is played.
Endless tapes can get caught up in the deck's moving parts if used incorrectly. Use tapes appropriate to this unit's auto-reverse mechanism. Failure to operate these tapes correctly may cause the tape to wind around the revolving parts. Always read the instructions provided with your tapes.

Ustenl.eto _,_es_. _

[] To fast-forward

or rewind the tape

Press [1_1<1/<1<1] [I_I_/I).tIH] in the stop mode. or
Tape direction "[>"
To rewind [_</<<]

To fast-forward p_HH]



To fast-forward
To find the Program Sensor) ('rPs: Tape beginning of a program
TPS finds the beginning of a track and resumes play from there. Each press increases the number of tracks skipped, up to a maximum of 9. Press []_1_1/'_1_1] or [1_1_/1_1_] during play.
To protect tapes against further recording


Side A


TPS may not operate correctly in the following situations: If the interval between tracks is less than 4 seconds. If there is noise between tracks. If there are silent parts within tracks,

Tab for side "B"
Tab for side "A"
To m._ord only naJ position NormaJ pesitic tape Hi-position tape
Types of tapes which can be recorded correctly
Use normal and high position tapes. Metal position tapes can be used, but the unit will not be able to record or erase them correctly. The unit automatically identifies the type of tape.
Use normal position tapes. High position and metal position tapes can be used, but this unit will cot be able to record or erase them serrecUy.

. i _ ,_



The illustration shows how to removethe tabs to preventrecording. To record on the tape again, cover as shown,being caretulnot to coverthe highpositiondiscriminationole. h

LHow volume,


affect recording

3 -2 -4
The tape you are recordingis not affectedwhatsoever by changesin volume, sound qualityitield. [] To erase a recorded sound ]
1. Press [TAPE, DECK 1/2]. 2. Insert the recorded tape into deck 2. 3- _ only Press [REV MODE] to select reverse mode. 4. Press [e REC/STOP].
You cannot open deck 1 while recording. You cannot fast-forward or rewind one deck white recording with the other.
The recording levelwillbe recordedas it is on the tape being played beck. ] Press [TAPE, DECK 1/2].
Press [--_ OPEN] on both decks For playback: Into deck 1 For recording: Into deck 2 Close the holders by hand. I_'_ only Press [REV MODE]

and insert the tapes.

the reverse
_. _),(_Z) :One side records only. :Both sides record (fi-ont _ reverse).

_.'I+:1 [_+1

"C_:) " automatioafly changes to ___)" when [TAPE EDIT] is pressed.
Press [TAPE EDIT] to start recording.
To stop recording Press It]. Both decks will stop. To record from a specific point on a tape Before recording, advance the tape to the point fi'om where you want to start recording.
To start recording on the reverse side Load a tape and change the tape direction as follows: 1. Press {TAPE, DECK 1/2] and select tape deck 2. 2. Press [41] and immediately thereafter [11].The tape direction will be shown as =<7.
To record on the other side of the tape Turn the tape over and press [TAPE EDIT].

ITo record programmed

1. After step I11, program the track you want (perform steps [] on page 17), 2. Press [e REC/STOP] to start recording.
To start recording on the reverae side Load a tape and change the tape direct_n as follows: 1. Press [TAPE, DECK 1/2] and select tape deck 2. 2. Press [<1/11] and immediately will be shown as "<]'. thereafter [I]. The tape direction
To record on the other side of the tape Turn the tape over and press [e REC/STOP].

i.. :-::--:..

L_=.;.,:_o:::.: _::_:
This function makes it easier for you to select special CDs end tracks from amongst those loaded in the player
Press [ADECK 2 OPEN] end insert the tape. Wind up the leader tape so recording can begin immediately.

Press [CD].

Press [CD MANAGER] to select the desired mode. Everytimeyou pressthe burton:
1-TRACK -,,- 1-DISC -,.- 1-ALL




(OFF) Only one particular track is recorded. The tracks on only one pan'icular disc are recorded. The same track numbers on each of the CDs are recorded in succession. The odginal disptayis restored in about 3 seconds.)
[(CD 1) ~ (CD 5)] to select the disc you want.
This step is not required if 1-ALL was selected in step Iff.I.
Press [lqbe/<l_l] track.
or [IHI_itIHIH] to select the desired
This step is not required if 1-DISC was selected in step I_I.
Press [e REC/STOP] to start recording.
To stop recording To add a 4 second silent interval before stopping Press [I]. The CD will stop automatically too. To stop recording without a silent interval Press [e REC/STOP]. The CD will stop automatically too.


[] WhUemcording, if a track is cut off in the middte at the end of the front side, it is re-recorded from the beginning,on the reverse side. At the end of the reverse side recording stops and the current track will be interrupted.
ff the tape finishes before the CD The CD continues playing. Press [I] to stop it. (CD Manager function will also be canceled.)

ron, s,doI 1-- -II

The sound quality setting is stored automatically. It is recalled when "MANUAL" is next selected. All recordings are performed at the flat setting even if an alternative sound quality setting has been selected.

[L_ 1._ only

The AI equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound quality coordinates to achieve subUe sound quality settings with ease.
Press [3D AI] to adjust the surround Every time you press the button: 3DAI1 _ 3DAI2


Adjust the sound quality. (&) <-- --_ direction: SOFT-SHARP setting.L T directk_l: LIGHT-HEAVY setting Repeat steps (_) and _) to set the desired sound quality. The odginal display is restored on the display panel in about 5 seconds.
The sound quality setting is stored automatically. "AI-EQ" is next selected, sound quality setting has been selected.

It is recalled when

All recordings are performed at the fiat seffing even if an alternative
The timer has two functions.
It can be sot to on at a certain time to
wake you up, or it can be set to record the radio or from the aux source. The play timer cannot be used in combination with the record timer.
Turn the unit on and sot the clock (-_ page 11). For the play timer, prepare the music source you want to listen to; tape, CD, radio or aux, and sot the volume. For the record timer, check the cassette's erasure prevention tabs (-i- page 20: m), insert the tape in deck 2, solect the reverse mode (for SC-AK44) (._ page 22) and tune to the radio station (-_ page 12) or select the aux source (.i. page 29). ] Press [CLOCK/TIMER] to select Every time you press the button: CLOCK--PLAY _ _REC

the timer function.

Previous display -._
@PLAY : to set the play timer _REC : to sot the record timer
Setting the start and finish times
_ (Within 8 seconds or so) Press [TUNE/TIME ADJ (V) or (A)] to select the starting time. Press [CLOCK/TIMER].


z LJ'JLJ_ _l_/l*l --I il I'LI_J_


l_) Press [TUNE/TIME ADJ (V) or (A)] to select the finishing time. _) Press [CLOCK/TIMER]. The start and finish times are now set. Tuming the timer on to display the timer indicator. ]

Press [_PLAY/_REC]

L_ (OFF).,,---J _PLAY REC : to turn the play timer on : to turn the record timer on
('The indicator doesn't appear if the start and finish times or the clock haven't been set.)

_so Y n"_ I _



Press [_/I, POWER]for the tlmere to operate. The unit must be off to turn the unit off,
s For play timer The timer play will start at the preset time with volume increasing gradually up to the volume level you preset. For record timer The record timer comes on about 30 seconds eatiier than the sot time.




To cancel the timer Press [_PLAY/_REC] to clear the timer indicators from the display. (The timer comes on at the set time everyday if the timer is on.) To change the settings (when unit is on) To change the play/record times Do steps Ira, B [] and []. To change the source or volume 1. Press [PLAYi_REC] to clear the timer indicator from the cr_splay. 2. Make changes to the source or volume.

3. Dostep_ to[]. _



on next page)


1"o change the timer Press [@PLAY/_)RIEC] to select the des=red hmer Every hme the button =spressed the setting changes as follows PLAY _ REC
(OFF)._ To cheek settings Whtle the und ts on and the '_)PLAY"
(or =_)REC") _ndlcator is on,
press [CLOCK/TIMER] so '_PLAY" (or '_REC") appears on the display Two seconds after "_PLAY _ (or "eREC") appear, the settings are d=splayed in the follow=ng order For play hmer For record timer (_) Play start t=me _ Recording start time Play f=nrsht=rne _ Recordtng ftnlsh hme _p Play source _ Recording source Playback volume You can check the setttngs even when the system _sOFF by pressing [CLOCK/TIMER] twice To enjoy the desired source after the timer setting is completed The volume level (for play hmer) and music source are stored in the ttmer memory and the ttmer will start in these preset conditions However. the Disc numbers and reverse mode (for SC-AK44) do not get stored in the timer memory 1 After step B. start playing the desired source 2 Reset the Dtsc numbers and reverse mode (for SC-AK44) _f you have changed any of them. confirm that a D=sc or cassette is inserted, then press [d)_1.POWER] to put the unit on standby
If you switch the system to the standby mode while the play/record timer is functtonlng, the OFF time sett=ngwill not be activated If AUX is selected as the source, when the timer comes ON, the system witl turn ON and will engage =AUX" as the source If you want to playback or record from a connected component, set the component's hmer to the same hme (See the instruct=onmanual that came with the component )
This timer turns your settable at 30-rninute "nusJc.
system OFF at the set time (Max. 2 hours, intervals). It lets you fall asleep listening to
Switch on the Dower The figure shows how to set the system to standby mode after 30 minutes. While enjoying the desired source: Press [SLEEP] to select the desired Pana_mi_ Every time you press the button: r,- SLEEP30 -,_ SLEEP 60--,- SLEEP 90 _._ SLEEP 120_-- SLEEP OFF
The system is turned off after the set time has elapsed. To cancel the sleep timer: Press [SLEEP] to select "SLEEP OFF". To confirm the remaining time: (only while system is ON) Press [SLEEP] To change the time remaining during operation: Press [SLEEP] to show the remaining time then press [SLEEP[ to select the desired time.

The sleep timer turns OFF automatically the moment you attempt to edit-record a CD using CD Manager function. The sleep timer can be used in combination with the play/record timer. The sleep timer always has pdonty. Be sure not to oveitap timer settings.

I Ustening

Io an external


(See page 7 for external unit connection) 1. 2. Press [AUX]. The system will come on automatically. Start playback from the extemaJ source. (For details, refer to the owner's manual of the equipment.) from an external source I

I Recording 1. 2. 3.

Press [AUX]. Press [e REG/STOP] (recording starts). Start playback from the external source. (For details, refer to the owner's manual of the equipment.) Ustening with headphones I
Reduce the volume level, and connect the headphones. Plug type: 3.5mm (Vs") stereo

Avoid listening damage.

for prolonged


of time to prevent


Before requesting service, make the checks below. If you can't fix the system as descnbed below, or if something not listed here occurs, refer to the enclosed directory to locate an Authodzed Service Center convenient to you or contact your dealer For detailed instructions, contact an authorized servicenter M the U.S.A. and Panssonic Canada Inc. Customer Care Centre in Canada. or visit www.panasonlc.corn
In the U.S.A., carl 1-800-211-7262, e-mail, In Canada, call 905-624-5505 or visit Reference pages are shown as block circled numbers _.
Common Problems No sound.
Sound is unfixed, reversed or comes from one speaker only. Hummlng "ERROR" "-:--" heard during play. is displayed. _peare ;n the
Turn the volumeup. The speakercablesmay be shorted.Turnthe unitoff,check andcorrectthe connections and turnthe uniton. Checkthe speakerconnections.
An AC power supply cord or fluorescent fi'om this unit's cables.
5ght is near the cables. Keep Other appliances and cords away
Incorrect operation performed. Read the instructions and try again. You plugged the power supply cord in for the fi_t time Or ihere Was a power failure recently. Set the time. Check and correct the speaker cords connection If this does not fix the problem, there is a power supply problem Consult the dealer.
display. "F61" is displayed.

to the radio

NoiseIs_,r_. :'i


. _ or doeth ,'t li_.

Use an outdoor anfann_

Sound Is dist0rted_ A beat sound is heard.

is a television

set nearby The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna, The TV antenna wire is too close to the unit. Separate the antenna wire of the "IV set from the unit.
The picture on the TV disappears or stdpes appear on the screen.
Using the cassette d_k Poor quality__unU. __,_:.;:_Cleantheheads._ _ ,.: ,. :. o, I Recording Is nt possli)le. "l ifthe erasurepreventiontabs havebeen removed,coverthe holes w_ adhesNetape: Playing discs
The disc may be upside dowq. _ Replaca the dLs_|f It IS scratched, warpod; or non.sfandard; : Condensa_iton may have formed inside the unit due.t0a s_n_ hour for it to c!ear and fry agam_ 'TAKE OUT/DISC" on the display. appears. in tempe_ture. ;:: ::. _:about an
There is a problem with the disc mechanism. (A power failure may have occurred.) The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the trey, close it. The unit will make the disc changing noises for a few moments and then it should operate normally.


control Check the batteries are inserted correctly. Replace the batteries if they are worn
Remote control doesn't work.

Maintenance :

: :!:i;

: : ::

I, ro
To cleon this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soapand-water solution or a weak detergent solution. Never use alcohol, paint thinner or benzine to clean this unit.
Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included).
Before using a chemically treated cloth, carefully read the instructions that came with the cloth.



Cl[o ' ar.

1-800-332-5368 (CustomerOrders Only) Panasonic Services Company 2042184th AvenueSouth, Kent,WA 98032 (6 amto 5 pmMonday-Friday; 6 amto 10:30amSaturday; PST) (Visa, MasterCard, Discover Card, American Express, Check)


611W [ K "wl l l 611{.W I l
CALIFORNIA 6550 Katella Avenue Cypress, CA Dubuque Avenue S. San Francisco CA Sherman Way Suite 102 Canoga Park, CA 91306
3878 SuiteA San Diego, CA 92123 Ruffin Road
GEORGIA 8655 Roswell Road Suite 100 Atlanta, GA 30350 ILLINOIS 9060 Golf Road Niles, IL North Randall Road Elgin, IL 60123 (Pick-up/Drop-off only) MARYLAND 62 Mountain Road Glen Burnie, MD 21061
MICHIGAN 37048 Van Dyke Avenue Sterling Heights, M148312 MINNESOTA 7850-12 _ Avenue South Airport Business Center Bloomington, MN 55425 OHIO 2236 Waycross Road Civic Center Plaza Forest Park, OH 45240 PENNSYLVANIA 2221CabotBIvd.West Suite B Langhorne, PA19047
TEXAS 13615Welch Sui_ 101 Branch Road

Farme_ TX 75244

WASHINGTON 20425_84 th Avenue South Kent, WA 98032
COLORADO 1640 South Abflene Street Suite D Aurora, CO 80012
FLORIDA 3700 North 29 ch Avenue
MASSACHUSETTS 60 Glacier Drive Suite G Westwood, MA 02090
HAWAII 99-859 lwaiwa Street Aiea, Hawaii 96701 Phone (808) 488-I 996 Fax (808) 486-4369
Suite 102 Hollywood, FL 33020

F04030 AS_ APR'O0

AMPLIFIER SECTION Power output 10% harmonic Total distortion 70 Hz-120both Hz, channels ddven (Lowhannel) per c 100W channel (6f4) 120Hz-16kHz, both channels driven
(High channel) 40W per channel (6_) Total Bi-Amp power 140W per channel Power output 10% Total harmonic distortion 8OHz, both channels driven (Lowchannel) 105W per channel (6Q) 1 kHz, both channels ddven (High channel) 45W per channel (6Q) Total el-Amp power 150W per channel Input sensitivity AUX 250 mV Input Impedance AUX 13k.Q AMPLIFIER SECTION _ Power output 10% Total harmonic distortion 70 Hz-120 Hz, both channels ddven (Low channel) 85W per channel (6Q) 120 Hz-16kHz, both channels driven (High channel) 35W per channel (6Q) Total Bi-Amp power 120W per channel Power output 10% Total harmonic distortion 80 Hz, both channels driven (Low channel) 90W per channel (6_) 1 kHz, both channels driven (High channel) 40W per channel (6_) Total Bi-Amp bower 130W per channel Input sensitivity AUX 250mV Input Impedance AUX 13k_
FM TUNER SECTION Frequency range 87.9 - 107.9MHz (20OkHz steps) 87.5 - 108.0MHz (1COkHz steps) Sensitivity 2.5pV (IHF) S/N 26dB 2.2pV Antenna terminal(s) 75 _ (unbalanced)
AM TUNER Frequency SECTION range 520 - 1710kHz (10kHz steps)
Sensitivity S/N 20 dB (at 1000 kHz) CASSETTE DECK SECTION

550 pV/m

SPEAKER SECTION Type 2 way speaker system Speaker(s) Woofer 12cm (43/4 cone type _) Tweeter 6cm (2%') cone type Impedance 6_ Input power 100W (Music) Output sound pressure level 85 dB/W (1.0 m) 5 kHz Cross over frequency Frequency range 45 Hz-22 kHz (-16 dB) 55 Hz-20 kHz (-10 dB) 211 x 332 x 250 mm Dimensions (WxHxD) Mass (8%6"x 13VI6- x 92'/_-) 2.8kg (6.2 Ib)



AC-V16 D100E B5702 PB1000 KH 967 Controller DZ9080 4X4-2000 AJL305 VGN-CS11s W GTS300 Kart DS SHR-2160 EMP-TW680 KS 54 SNB6500-00 B215A HR-S5800E Urei 1603 Drive ES-TG55G Polaroid A600 Cordless 1500 BMW E39 DX36M 1-0-0 WFT85B31EC Arcanum DVP-S315 KDL-32S5600 YS624TM LG UW92 Four FMP XBV442 DVD6193 UF-770 TAS4012 I845GE KE-14P2SX ES-4033 PC140 Orlando MP46 K7SOM Workstation Language AR-8600 VWM-900 T7272 11 5 PPS 1-11 Ultima Finepix A303 Units KH1516 LN19A650a1D HB404 XK-005 Director Behringer B212 Makita 9404 MHC-771 Samsung H200 LX8500W 01 Navigator 7 TC-919 DCT3400 7 0 Pqwrcdf0 DSP-A595A DPF-D720 KX-TGA641E Notebook 720-0001 SF-560R CDX-F7000 CS-PA9GKD 29FS2ANX EN 1 Dual II Cable T6530 MSR4050G Photo 950 DK4010 Kdfx 6010 42PFL7433D PX200E Neonumeric NM5 Aspire 5920 DVC-1000 VPL-AW15 37x20e S FS-9520DN 1AL-CH MXE-60 MY2000 25 II 14PV162 Sans FM RSP-960AX


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101