SWITCH (PLUNGER SUPPLY) Q701,Q702 6
Q706 SWITCH (PLUNGER SUPPLY)
Q385 D705 Q703,Q704 REGULATOR OVERLOAD PROTECTION
Q381~Q384 REGULATOR/ STABILIZER

D381,D385

QD709 DC DETECT
IC702 PQ1CZ31H2ZP REGULATOR

L701, L712

Q705 CURRENT LIMITTING CONTROL

Q374 DC DETECT FAN MOTOR

Q351~ Q354 SWITCH
Q708~Q713 REGULATOR/ STABILIZER
IC703 LM2940T5M REGULATOR

D712, D714, D716

IC604 BU2090AF-E2

I/O EXPANDER

CLK DATA

OUTPUT BUFFER

CONTROL CIRCUIT

4~9,12,13

Q608 CONT 15 LED SUPPLY (DRIVE) SWITCH

D620,D630

KEY SW

KEY3 SER2

32 SYNC

18 Q601 RESET SWITCH

31 Z601

Q610 DECK SUPPLY SWITCH

Q609 PCONT SWITCH

Q373 PCONT SWITCH

SIGNAL LINES
MAIN SIGNAL LINE DVD AUDIO/VIDEO SIGNAL LINE CD/DVD AUDIO SIGNAL LINE DVD VIDEO SIGNAL LINE PLAYBACK SIGNAL LINE RECORD SIGNAL LINE
) indicates Pin No. of right channel.

IC501 RSN311W64B-P

DISP HMUT -DI SENS +VCC LOW
+DI SENS SL IN(R) FLIN(R) IN GND IH DET RELAY SUBIN +VD CIN -VD

-VCC LOW

+VCC HI

SL_O(R)

26(25)

18(19)

7 D502

6 D501

DC_DET
Q505 SWITCH Q506 POWER CONTROL SWITCH Q503 PHONE D202 SWITCH

H_OUTL(R) FILTER + LCH

FL_O(R)

-VCC HI

JK502 HIGH SPEAKER

FILTER

JK501 SUBWOOFER SPEAKER

CCH FILTER

SLOUT(R) Q501,Q502 DC_DET SWITCH

JK503 CENTRE SPEAKER

JK503 SURROUND SPEAKER

SYNCHRONIZE SWITCH

JK603 HEADPHONE

Q593 REGULATOR Q592 Q598

D591,D592

+B Rch

T501 HP_L(R) POWER D701~D704 L704,L705

D561~D563, D569

FOR GC ONLY

S501 T502

SUB TRANSFORMER

IC503 STK470-050A

C004 C005 0.1 R001 0.1

C4 L1 R1 C1 R2

LC MODULE

LDIN 2 3.0V

LDOUT LDGND

VR001 15K
TO DVD MODULE (1)CIRCUIT (FP5201) ON SCHEMATIC DIAGRAM-2

GND VREF

15 SW 14 13

2 VCC 3 T1 4

x1 17K

LD BIAS

x2.75 x1 17K

x2.75 x1

x2.75 x1 x2.75

RFN RFP

C007 0.1

C008 0.1

R002 0

C009 0.1

VR002 1K

F1 (60k)

LDGND LD

P2 P4 P8 P1

P3 P7 P9 P5 P10
F2 (60k) (160k) VCC F GND

(160k)

SCHEMATIC DIAGRAM - 2

DVD MODULE(1) CIRCUIT

IC2501

C0GBG0000020

MOTOR DRIVE 1 BIAS1 R2502 15K C2507 0.VINVINOPIN+ 5 OPINR2503 15K C2508 0.1 C2506 0.FIN FIN 8 VCC(CH1-2) C2501 6.3V220P C2504 0.MUTEVO212 VO2+ 13 VO114 VO1+ LDCNT 28 MUTETRIN 26 BIASLDIN 24 VINPREVCC 22 FIN VCC(CH3-4) 21 MUTEV03- 18 V03+ 17 V04- 16 V04+ 15

6 GND(PRE)

10 GND(CH1-2) GND(CH3-4) 19

R2505 82K

R2504 82K
T+ 30 F+ 29 F- 28 T3.3VHFM 27 26
TC5225 TC5224 TC5223 TC5222 TC5221 C5251 0.1 TC5220 TC5219 TC5218 TC5217 TC5216 TC5215 C5253 4700P VLP0323A601R C5223 0.1 LB5202 TC5213 TC5212 TC5211 TC5210 TC5209 LB5201 TC5208 JALBK2HS470T TC5207 TC5206 TC5205 TC5204 TC5203 TC5202 TC5201 C5205 1000P C5206 1000P C5207 1000P C5208 1000P R5221 R5222 Q5211 LD SUPPLY SWITCH QR5215 SUPPLY SWITCH (+3.3V) 8.2K 8.2K Q5215 CD SUPPLY SWITCH C5221 0.1 LB5203
RRC5211 6.3V47 C5215 6.3V47 C5240 560P C5238 0.22 C5236 1000P
LB5206 C5252 10V10 LB5205 LB5204
TA(DVD) TD(DVD) TC(DVD) TB(DVD) VCC5V FE1 GND LD+(CD) T1(CD)

VREF2.2 (CD)

Q5211 R5214 22K

TC5227

TC5226
TO OPTICAL PICKUP UNIT (FP5201) ON SCHEMATIC DIAGRAM-1

R5236 0

R5211 2.2

C5239 0.1

C5237 0.1
GND 25 LD+(DVD) 24 GND 23 GND 22 AFP 21 AFN 20 F1(DVD) 19 F2(DVD) 18 GAINH/L 17 PIN(DVD) VREF2.2 16
LB5205-LB5206 VLP0323A601R LB5203-LB5204 VLP0155-T
C5225 0.1 C5224 0.1 TC5230 R5217 47K TC5229 R5213 47K L5201 C5201 16V10

R5215 2.2

ELJEA100KF
TESTSG AGC6 RFINN RFINP PEAK OCRF RFENV FLTON DCAGC FLTOP

C5204 0.1

C5203 0.1

37 VCCVINVINVINVIN8

IN_SW 23 LOCUR 24 VREFA+5V 26 RFENV 27 TSTSG 28 NARF ARF AGND A+3.3V A+3.3V VHALF FS FE TE AGND BDD OFTR FEPDATA FEPCLK FEPSENS AGND TBAL FBAL 45 46
TC2067 TC2068 TC2069 TC2070 TC2071 TC2072 TC2073 TC2074 TC2075
C2041 6800P TC2017 R2038 1M C2042 2700P TC2014 C2043 0.1
CP2002 R2039 15K R2036 12K C2048 0.01
AGND 47 GAINH/L 48 HFMON 49 AGND 50

C2015 0.1

SCHEMATIC DIAGRAM - 5
A13 A12 A19 A18 A17 A16 A20

TP5202

TP5205

TL5202

TL5205

C2002 4V100P

L2002 G1C100KA0019

C2061 0.1

A21 A22 A23 A24 A25
L2001 G1C100KA0019 TC2011 C2009 0.1 C2014 0.1 C2001 4V100P C2008 C2004 0.1
A27 0.1 C2003 4V100P L2003 G1C100KA0008 C2007 0.1 A28

D2001 MA111TX

76 AD5 AD6 25VDD 25VSS PBAL MONC MONB MONA CPUDTOUT XRESET TX 33VDD 33VSS DAT0 DAT1 DAT2 DAT3 CPUDTIN CPUCLK CPUIRQ ENC ENS CHCK40 AD3 AD4 AD2 AD1 AD0 AVDD DA1 DA0 AVSS 8 ARF 9 NARF 10 IREFIREFDSLFDSLFAVDD 15 VHALF 16 PLPG PLFG 18 AVREFH 19 RVI 20 AVSS 21 PLFLTPLFLT2 VFOSHORT AVDD HPFIN HPFOUT AVSS LPFIN LPFOUT CMPIN TRCRS 23 JITOUT 24 RFDIF 25 RCSLFLT

33VDD 75 33VSS 74

C2021 0.1

C2022 0.1

DIGITAL SWITCH CONTROL
TEST 73 MINTEST 72 NCLOCK/JUMP 71 SUBC 70 IPFLG 69 DACLK 68 NTRON 67 DACDATA/LG 66 DACLRCK/JMPINH 65 IDHLD 64 SBCK/PLLDK 63 BLKCK/CPDETLRCK/CPDETIDGT/TEMUTE 60 DTRO 59 25VDD 58 25VSS 57 TILTN 56 TILT 55 TILTP 54 FG 53 SPDRV 52 TRSDRV 51
A29 A30 A31 A32 A33 A34 A35 CP2004 CP2001 A36 A37 A38
R2014 47K C2006 0.1 K2001 ERJ3GEY0R00V

C2044 0.1

C2045 47P C2046 0.018

R2013 R2012

12K 12K C2012 0.047 C2013 0.1
C2047 0.01 TP2001 TL2001 R2040 47K

50 R2041 12K

C2023 0.1

CP2003

C2024 0.1 C2049 0.47
LOUT ROUT AVSS GBAL TBAL FBAL 33VSS 33VDD OFTR SYSCLK BDO TSTSG

VCOF DBALO JLINE AVDD

A39 C2005 0.1 R2011 4.7K C2011 0.1

IC3071
16M SDRAM C3071 0.1 DQ(0) DQ(1) 1 VCC 2 DQDQVSSD DQ(2) DQ(3) C3072 0.1 DQ(4) DQ(5) 5 DQDQVCCQ 8 DQDQVSSQ DQ(6) DQ(7) C3073 0.DQDQVCCQ 14 LDQM 15 XWE 16 XCAS 17 XRAS A(11) A(10) K3071 ERJ3GEY0R00V A(0) A(1) A(2) A(3) C3073 0.XCS 19 AAAAAAVCC VSS 50 DQDQVSSQ 47 DQDQVCCQ 44 DQDQVSSQ 41 DQDQVCCQ 38 NC 37 UDQM 36 CLK 35 CKE 34 NC 33 AAAAAAVSS 26 A(9) A(8) A(7) A(6) A(5) A(4) FOR GCS GC GK GN C3076 0.1 DQ(11) DQ(10) DQ(9) DQ(8) CDQ(13) DQ(12) DQ(15) DQ(14) B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B34 B35 B36 B14 B13 C1 C2

SCHEMATIC DIAGRAM - 10

: +B SIGNAL LINE : CD/DVD (AUDIO) SIGNAL LINE : DVD (VIDEO) SIGNAL LINE

A(8) A(11)

R3001 22

C3013 10

C3012 10

C3008 10

C3006 0.1

C3005 0.1

C3007 10

DQ(12) DQ(2) DQ(13)

C3004 10

DQ(0) DQ(15)

DQ(1) DQ(14)

DQ(5) DQ(10)

DQ(11)

DQ(7) DQ(8)

DQ(6) DQ(9)

C3042 0.1 C3080 6.3V330

C3003 6.3V330

C3002 6.3V330

C3001 6.3V330

158 157

VSS MA7 MA10 VDD
VDD XRAS XCAS VSS XWE DQMUM VDD DQMUE DQMLM LVDD
DQMLE VSS MCK VDD MCKI VSS MDQ7 MDQ8 VDD MDQ6 MDQ9 VSS MDQ5 LVDD
MA8 MA11 LVDD MA9 VSS XCSM XCSE

MDQ10 VDD MDQ4 MDQ11

VSS MDQ3 MDQ12 VDD MDQ2 MDQ13 VSS MDQ1

MDQ14 VDD MDQ0 NDQ15 VSS

C3015 0.1
C3035 0.1 VDD 156 VDVDVDVD4 152
1 VDD 2 MAMAMAVSS 6 MAMA2
CCP3001 CP3002 C3017 CP3003 CP3004 CP3005 CP3006 CP3007 CP3008 CP3009 CP3010

RA3008 10K x 2

8 MAVDD 10 MATESTXRST 13 TESTLVDD 15 TESTTESTTESTTESTVSS 20 TESTTESTTESTTESTVSS 25 HMDHMDXHINT 28 XDK 29 VSS 30 XWR 31 XRD 32 XCS
VSS 151 VDVDVDVDLVDD 146 VCLK 145 RA3011 XVSYNCXHSYNCDCTEST 142 47K x 2 TESTSEL1141 TESTSELPLLTEST 139 MODEACKIO 137 NC 136 AVSSVYOUT 134

C3034 0.1

IC3001 MN677533MP

AV DECODER

COMPY 133 IREFY 132 VREFY 131 AVDDVCOUT 129 COMPC 128 IREFC 127 VREFC 126 AVSSVGOUT 124 COMPG 123 IREFG 122 VREFG 121 AVDDVBOUT 119 COMPB 118 IREFB 117 VREFB 116 APLLAVSS 115 AVCOIN 114 ATVROUT 113 APLLAVDD 112 VDD 111 EXTCK 110 ATCPOUT 109 APLLVDD 108 VSS 107 CLKLVDD 105

C3083 10

R3080 7.5K C3081 0.1

C3084 10

R3084 7.5K

C3018 0.1

33 HCLK 34 VDD 35 HAHAHAHALVDD 40 HAHAHAHAVSS 45 HAHAHAVDD 49 HDHDHD2

C3085 10

R3087 7.5K C3082 0.1

C3019 10

C3086 10

R3088 7.5K C3041 0.1

C3033 0.1 C3032 0.1 C3031 0.1

R3007 0

VDD HD3 HD4 HD5 HD6 VSS HD7 HD8 HD9 HD10 LVDD HD11 HD12 HD13 HD14 VSS HD15

52 VSS

DACCK LRCK SRCK VDD ADOUT0 ADOUT1 ADOUT2 VSS CLKMON CLK121 VDD CLK127 PLLAVDD ICPOUT PLLAVSS CKIO PLLVDD

AUDSTR

STD3 STD2 STD1 STD0 VSS IECOUT ADOUT3 LVDD
VSTR VRQ AVRTM VDD STD7 STD6 STD5 STD4 LVDD

103 104

CR3005 47K

R3003 100

C3022 C3023 C3025 CC3027

C3021 0.1 R3002 4.7K

B37 B38 B39 B40 B41

C3024 10

0.1 C3028

C3029 0.1

CP3011
B43 B42 B10 B44 B2 B3 B4 B5 B6 B7 B8 B9

CP3012 RAx 2

22P C39

C35 C34

C7 C8 C9

C3 C4 C5

K3001 ERJ3GEY0R00V

SCHEMATIC DIAGRAM - 11

: +B SIGNAL LINE : DVD (VIDEO) SIGNAL LINE

L3091 G1C100KA0008

D3091 MA111TX

1 VIN C3091 0.1

Vo 6 C3093 10V10

C3092 0.1

IC3091

2 GND GND 5

C0CBCBD00002

REGULATOR C13

K3101 ERJ3GEY0R00V R3101 75
K3115 ERJ3GEY0R00V RK3116 ERJ3GEY0R00V K3112 ERJ3GEY0R00V K3111 ERJ3GEY0R00V RR3082 2K

R3085 18K

R3089 3.3K

K3105 ERJ3GEY0R00V

C3088 R3086 4.3K 0.1

C3089 R3090 2.2K 0.1

C3087 0.1

R3083 1.3K

R3105 75

SCHEMATIC DIAGRAM - 12

C3210 0.1

C24 C13

C3209 0.1

I/O_OUT

Y_TRAP

SELECT

IC3301

CV_SAG

CV_OUT

I/O_IN

CV_TRAP

C1AB00001393

VCC2 C_IN GND

C3305 0.01

C3307 0.01

C3302 0.1

QR3301

R3301 6.8K

R3307 5.6K

C3308 15P R3302 3.3K

RRK3305 RK3304

LB3301-LB3305 VLP0155-T

D11 LB3301 LB3302 LB3303

TC3303

TC3301

TC3302

TC3304

LB3304

TP3278

TP3282

TP3281

TP3279

TP3277

TP3276

TP3280

TP3275

TP3274

TP3273

TRAY/TRV TRAYMUT TRV_SW+ TRAYDRV TRAYREF G VGND

TP3272

TO MAIN CIRCUIT (CN501) ON SCHEMATIC DIAGRAM-22

YC_OUT/ CR/R

TP3271

TC3305

LB3305

L3301 G1C220K00011

C3301 4V100P

C3303 16V10P

TP6279

TP6278

D+2.5V

TP6277

TP6276

TP6275

TP6274
TO MAIN CIRCUIT (CN302) ON SCHEMATIC DIAGRAM-22
LB3206-LB3207 VLP0155-T K3202
TC3207 TC3206 LB3206 TP6251 TP6259 K6251 ERJ14Y0R00H TP6253 TP6256 TP6255 TP6258 TP6257 C6257 6.3V100P A1 FL6253 VLF1505M105T K3201 ERJ3GEY0R00V A2 FL6255 VLF1491S104T A3 FL6251 VLF1505M105T FL6254 VLF1505M105T TP6252 A9

4 ERJ3GEY0R00V

C29 C30 C26 LB3207 A15

TP6273

TP6272

M+9VCTL/ VMUT

SCHEMATIC DIAGRAM - 13

TP6271

TP6254

LB3204 LB3203 LB3202

: DVD (VIDEO) SIGNAL LINE
LB3202-LB3204 VLP0323A601R

D3 A26

C6253 10V10

C6252 470P

C0CBCE00001

C6251 10

IC6251

1 VOUT VIN 7

IC6251 VIDEO

CONT 5

SCHEMATIC DIAGRAM - 14
: +B SIGNAL LINE : CD/DVD (AUDIO) SIGNAL LINE : MAIN SIGNAL LINE

A12 C38 C37

C4208 0.1

A14 A16

C4218 0.1
C4201 6.3V330 C4222 6.3V330

R26 25

MOO RSV(DATA) RSV AGND AGND AGND VCC VCC

C4217 0.1 R4201 0

L4211 G1C220KA0011 LB4200 VLP0323A601R C6553 0.1

CP4201

CP4202
37 RSTB 38 SCLKI 39 SCLKO 40 BCKIN 41 LRCIN C4215 0.1 C4213 10VTEST 43 VDD 44 DGND 45 DINDIN2 K4211 ERJ3GEY0R00V 47 DIN3
VCC 24 AGND 23 VCC 22 AGND 21 CP4203 NC(VOUT8) 20 AGND 19 VCC 18 AGND 17 NC(VOUT7) 16 CAPVOUT1 14

VOUT6 VOUT5 VOUT4 VOUT3

IC4211 CDFBBK000021

CP4204

C36 C35 C34

C4216 6.3V100P

48 ZFLGA

VOUT2 13

L6502 ELJFC220KF

SCHEMATIC DIAGRAM - 15

: +B SIGNAL LINE : MAIN SIGNAL LINE
LB4217 LB4216 FL4201 VLF1505M105T LB4215 LB4214
TC4220 TC4219 TC4218 TC4217

TC4216 TC4215

LB4213 LB4212 LB4211

TC4214 TC4213 TC4212

LB4210

TC4211

TC4210 LB4209 LB4208 LB4201-LB4217 VLP0323A601R TC4209 TC4208 TC4207 A6 A5 A4 A8 A7 LB4201 TC4201 TC4206 TC4205 TC4204 TC4203

LB4207

C32 C33 FP4202 TP4271

D16 D15 D14 D13 D12

TP4272 TP4273 TP4274 TP4275

TP4276 LB6514 VLP0155-T

L6501 G1C220JA0010

LB6515 VLP0157-T

TP4277
TP6501 LB6501 VLP0323A601R C6503 0.1 VLP0155-T LB6512 C6502 C6504 16V10P 0.VDDVSSCLKCLK6 VSSXTXT0 CE 16 CLKFSEL 14 CLKR6513 TP6505 10K LB6515 R6515 R6514 LB10 LB6502 C6505 0.1 TP6504 TP6503

1K (-4.29V) <-4.29V> -4.27V ((-4.27V)) R265 [-4.3V] 1K (-0.01V) <-0.01V> -0.01V ((-0.01V)) [-0.01V]
<7.7V> ((7.76V)) 7.75V
(-0.01V) <-0.01V> -0.01V ((-0.01V)) [-0.01V]

C264 100P

C266 100P

C268 1000P

R276 560

C270 16V10

C271 0.01

R273 39

C267 1000P

R271 39

<5.04V> ((5.05V))5.05V

R249 R263 22K 470

R275 560

C269 16V10

C272 C261 50V4.7 FLCH 0.01

R267 3.3K

C263 100P

C265 100P

R277 12K R269 68K R402 3.3K R407 10K
(-4.3V) <-4.3V> -4.27V ((-4.28V)) [-4.3V]
MUTING CONTROL FRONT SPEAKER
(5V) <5V> 5.01V ((5.01V)) [5.01V]

C275 16V22

R441 10K

R406 22K

R405 C887 18K 16V10

D203 UDZSTE175R1B

2SA1037AKSTX
(5.02V) <5.02V> C273 5.01V 50V3.3 ((5.02V)) [5.02V]

R404 1K

R303 3.3K

C305 50V1

C307 16V10

SR2 SL2

C321 50V1 C322 50V1

R417 3.3K

R302 27K

C304 33P

C302 100P

(-7.9V) ((-7.9V))-7.89V

C314 0.01 C301 100P

R305 56K

R418 3.3K

R301 27K

C303 33P

R307 1K

(0.65V) <0.65V> 0.65V ((0.65V)) [0.65V] (-0.01V) <-0.01V> -0.01V ((-0.01V)) [-0.01V]

8 + IC301

11 -VCC

14 R304 3.3K

R306 56K

R308 1K

+ C306 50V1 + CNT 3

SROUT C308 16V10 CCH 1

QUAD OP-AMP + SW 7

(7.78V) ((7.77V))7.78V

C316 50V1

C318 16V10 R316 56K

(-0.01V) <-0.01V>-0.01V ((-0.01V))[-0.01V] (-4.3V) <-4.3V> -4.29V ((-4.29V)) [-4.31V] (-0.01V) <-0.01V> -0.01V ((-0.01V)) [-0.01V]
D202 1SS355TE17 R877 1K R317 1K R318 1K

C311 1000P

R311 180K

C310 100P C312 47P

R312 27K R314 3.3K

C309 100P

C313 0.01

R315 56K

L808 RLQB100JTD-D

C320 50V1

R309 2.2K

C315 16V10

R310 3.3K

R313 3.3K Q301-Q302

C319 50V1

C715 16V22

R416 47K

SCHEMATIC DIAGRAM - 21

H_OUT_L H_OUT_R
R403 47K C292 50V1 R298 8.2K C291 470P C735 16V22 C290 10V33

C294 0.068

C293 0.068

R299 18K

R296 270K R410 8.2K

R408 82K R409 82K

C286 0.15

0.068 C288

(-7.89V) ((-7.9V))-7.88V

C441 100P

R278 47K

D401 1SS355TE17

C285 0.068

R291 4.7K

HPF3-2

HPF2-2

HPF3-1

HPF2-1

LEVEL1 LEVEL2 INVLPF

HPF1-1

HPF1-2
(7.06V) R286 ((7.04V))7.05V

(7.76V) ((7.75V))7.76V

(1.93V) ((1.92V))1.92V

R285 15K

C280 0.068

D201 1SS355TE17

R280 47K

C241 100P

SLOUT R282 47K

D315 1SS355TE17

D317 1SS355TE17

C281 0.068

R281 18K

R287 27K

R290 4.7K R288 C284 820K 10V47 C283 10V47 R289 4.7K

CN504 1

C282 50V1 R283 39K R284 39K

C736 16V10

CCH SROUT SLOUT
TO POWER CIRCUIT (CP504) ON SCHEMATIC DIAGRAM-31

R279 1.8K

D730 1SS355TE17

M62456FPE1

R368 33K
LED7.5V SROUT MO9V -7.5V CCH 7.5V 14.7V FAN DC_DET D729 1SS355TE17

10 CN503

TO POWER CIRCUIT (CP503) ON SCHEMATIC DIAGRAM-31

C387 1000P.GCS/GC/GN/GK

SUB WOOFER OUT

-7.5V 7.5V

TO SPEAKER CIRCUIT (CP505) ON SCHEMATIC DIAGRAM-33

SCHEMATIC DIAGRAM - 22

TRAY/TRV TRV-SW+ TARYMUT

12 TRAYDRV 11

TRAYREF DGND VGND CB/B
TO DVD MODULE (2) CIRCUIT (FP3203) ON SCHEMATIC DIAGRAM-12

2SB621ARSTA

REGULATOR Q710 Q706

DTC114YKA146

MUTING SWITCH FOR DVD

R776 22K

D707 1SS355TE17
VGND YC-OUT/CR/R VGND COUT VGND Y-OUT
REGULATOR Q708 C779 6.3V1000P

KTA1046YU

REGULATOR Q713

ZFLAG L=MUT ON

(0.12V) <0.12V> 0.11V ((3.32V)) [0.11V]
(4.78V) <4.78V> 4.78V ((-0.01V)) [4.76V]

DRIVEPOWER 13 HALF 14 CW

C451 0.01

Q1 POWER SUPPLY CONTROL

WCN703 SW5

RVTDTC143EST

SW2 SW1 SW3
TO TRANS CIRCUIT (W503) ON SCHEMATIC DIAGRAM-32

SPINDLE POSITION CIRCUIT

SCHEMATIC DIAGRAM - 23
: +B SIGNAL LINE : FM/AM SIGNAL LINE : MIC SIGNAL LINE : RECORD SIGNAL LINE : PLAYBACK SIGNAL LINE

RECR RECL

REGULATOR D706 1SS355TE17

RR711 560

(14.88V) <14.88V> 14.93V ((14.93V)) [15.05V]
(14.9V) <14.9V> 14.95V ((14.95V)) [15.06V]
R247 2.7K 14.7V Q701 DECK A.GND

R248 2.7K

CNT1 SR1

DTA114EKA146

SUPPLY SWITCH Q702

C718 0.01

(0V) 0V ((9.22V)) [0V]
(15.45V) 15.47V ((12.1V)) [15.44V]
(-0.02V) <-0.02V> -0.02V ((-0.02V)) [-0.02V]
(-0.01V) <-0.01V> -0.01V ((4.94V)) [-0.01V]

POWER CONTROL

(15.42V) 15.45V ((12.7V)) [15.41V]

R735 22K

(12.92V) <12.92V> 12.98V ((12.76V)) [13.12V]

D728 UDZSTE175R1B

(8.5V) <8.5V> 8.5V ((8.46V)) [8.49V]
(9.04V) <9.04V> 9.05V ((9.04V)) [9.04V]

R799 4.7K

D701-D704 RL1N4003N02
SL1 SPEANA L705 RLL500050T-Y PWCONT DCIN L703 C740 25V100 RLL500050T-Y Q451

C783 100V0.1

D705 DA204KT146 C719 0.01

R781 1K C720 16V10

R736 100K

D727 UDZSTE179R1B

C782 25V4700

R712 330

D704 RL1N4003N02

D703 RL1N4003N02

FP701 4000
Q705 CURRENT LIMITTING PROTECTION

R770 22K

(13.51V) <13.51V> 13.64V ((13.4V)) [13.72V]
(13.38V) <13.38V> 13.53V ((13.28V)) [13.61V]
(-3.14V) <-3.14V> -3.11V ((-3.12V)) [-3.13V]

R775 1K

D709 1SS355TE17 L701 RLL500050T-Y 10V10 C739
L712 RLQX101M-T R724 8.2K R798 1K

D711 SFPB-72V

D718 UDZSTE177R5B
(0V) ((4.24V)) 0V (0V) ((1.22V)) 0V

ON/OFF VIN

(15.63V) ((13.34V)) 15.62V (0V) ((5.94V)) 0V (0V) ((0V)) 0V

C788 6.3V820

R727 2.2K

L704 RLL500050T-Y

2SB621ARSTA Q451

D451 RL1N4003N02

<0V> 0V ((0V)) [0V] <9.52V>9.49V ((9.55V))[9.56V]

SWITCH

IC702 PQ1CZ31H2ZP
<9.53V>9.5V ((9.56V))[9.57V]

R452 10K

C639 50V3.3 100K 100K 100K 100K 100K 100K 100K 100K 100K 100K 100K 100K 100K
D658 MA8047MTX L602 RLBN102V-Y

D658 C636 50V3.3 Q610

<4.96V> 4.99V ((5V)) [5.02V]
<4.85V>4.88V ((4.89V))[4.91V]

R662 R663 R664

DECK SUPPL SWITCH Y

R690 470K R691 4.7K

<4.2V> 4.23V ((4.24V)) [4.26V]
MRT_L PL_L -VREF DVREF+MK_IN1 MK_IN2 DMT BP REC_H
TO DECK CIRCUIT (CN1303) ON SCHEMATIC DIAGRAM-30

H601 /W601

SEG16 SEG15 SEG14 SEG13 SEG12 SEGSEG10 SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG2

AND5 /REG5

D672 D673 D677 C622 330P R680 22K

IC601 C2BBGF000280

VSS REST XCOUT XCIN VSS XIN XOUT VCC MBP1 MBP2 PCONT

SP_A SP_B SP_C

AND6/REG(-25.21V) ((-25.19V))-25.12V AND7/REG(-25.19V) ((-25.17V))-25.1V AND8/REG(-25.25V) ((-25.15V))-25.1 V AND9/REG9 (-25.19V) ((-25.17V))-25.08V AND10/REG(-25.2V) 45 ((-25.18V))-25.1V AND11/REG(-25.52V) ((-25.17V))-25.1V AND12/REG(-25.12V) ((-25.19V))-25.1V REGION IN 43 (0V) ((0V))0V SD IN 42 (5.05V) ((5.04V))5.01V DO/ST 41 (5.14V) ((5.14V))5.13V PHONE 40 (0V) MIC SW 39 ((0V))0V (0V) ((0V))0V SENSE 38 (0V) ((0V))0V DSP ACK 37 (5.08V) ((5.07V))5.06V DSPRST 36 (4.89V) ((4.87V))4.83V SER(0V) ((0V))0V SER(0V) ((0V))0V SER(0V) ((0V))0V SYNC 32 (2.9V) ((2.89V))2.89V RMT 31 (4.64V)

((4.63V))4.58V

D671,D673.GCS/GCP/GC/GK D672.GN D677.GCS/GC/GK 1SS355TE17 Q609
<0V> 4.47V ((4.47V)) [4.49V]
<0V> 0V ((0V)) [0V]
FL1 FL2 SYNC D.GND PCONT SYS6V
TO TRANS CIRCUIT (CN501) ON SCHEMATIC DIAGRAM-32

H602 /W602

AND1 /REG1 AND2 /REG2 AND3 /REG3 AND4 /REG4

DTC114EKA146

PCONT SWITCH C621 1000P
-VREF R656 R657 22K 47K RR907 R903 R902 R901 R918 R917 R916 1K 220 CN601 H.P R H.P GND H.P L H.P SW DO/ST DGND LED7.5V SD SENSE DSP ACK DSPRST PCONT SER5 SER6 SER7 SER8 MECHCS MECHCK MECHSO MECHSI MECHRQ MECHRS DCDET +7.5V -VP R912 SW 5V 100 SP-IN MIC GND MIC
R651 1K R650 22K R904 47K R649 47K C613 0.01
(2.92V) ((2.91V))2.91V (2.92V) ((2.91V))2.91V (1.94V) ((2.1V))1.94V (0V) ((0V))0V (0V) ((0V))0V (0V) ((0V))0V (4.9V) ((4.88V))4.88V (0V) ((0V))0V (4.88V) ((4.87V))4.88V (2.36V) ((2.35V))2.35V (2.07V) ((2.34V))1.95V (0V) ((0V))0V (2.18V) ((2.78V))2.21V (2.34V) ((2.38V))2.32V (4.91V) ((4.89V))4.88V (0V) ((0V))0V (4.91V) ((4.89V))4.88V (4.78V) ((4.76V))4.76V (0V) ((0V))0V (5.07V) ((5.07V))5.07V (0V) ((0V))0V

R973 39K

1 HALF 6

R972 820

AD_OUT

MODE RECINH_R

HALF VREF-

MECHANISM DECK CIRCUIT

PHOTO INTERRUPTER

RVSGP2S24BC

Z971 EXBF7L355SYV

SCHEMATIC DIAGRAM - 30

R1105 2.2K R1106 100K

Q1101,Q1201

<0.7V> 0V ((0.7V)) [0.7V]

R1107 1K

R1205 2.2K R1206 100K

R1310 4.7K

<0.71V> 0V ((0.7V)) [0.7V]

R1207 1K

C1109 50V3.3

R1209 1K

R1109 1K

R1313 10K

C1310 50V0.1
<2.37V> 0V ((2.36V)) [2.36V] <0V> 0V ((0V)) [0V]
<2.45V> 0V ((2.45V)) [2.45V]

C1209 50V3.3

MOTOR_GND 9 MOTOR_9V 8

R1110 33K R1210 33K

15V 7 GND PB LOUT 4 PB ROUT 3 AF_GND REC LIN 2 REC RIN 1
TO MAIN CIRCUIT (CN100) ON SCHEMATIC DIAGRAM-23

DTC143XKA146

SWITCH Q1304

H1304 /W1304

R1376 2.2K

DTA143XKA146

SWITCH(REC:H)
<8.22V> 8.23V ((8.22V)) [8.23V]

DTC143EKA146

RECH BP /DMT
<8.2V>8.2V <8.2V> ((8.21V))[8.21V] 8.22V ((8.21V)) [8.22V]

R1373 2.2K

AN6/MK_INAN7/MK_IN1 5

R1317 47K

R1316 1K

Q1316 SWITCH

R1372 4.7K R1315 47K R1314 1K

VREF+ VREF-

TO PANEL CIRCUIT (H601/W601) ON SCHEMATIC DIAGRAM-28

PL_L MOTOR_L

<8.79V> 0V ((8.8V)) [8.8V] <9.54V>9.46V ((9.53V))[9.54V]

2SD965RTA

CN1303
<-3V> 9.41V ((-2.22V)) [-2.5V]

R1342 47K

<9.53V>9.48V ((9.53V))[9.54V] <9.51V> 9.45V ((9.51V)) [9.52V]

R1344 27K

C1326 16V10

MOTOR_GND MOTOR_VCC

<-2.55V> 0.75V ((-2.77V)) [-2.73V]
<9.53V> 1.78V ((9.52V)) [9.53V]

R1343 3.3K R1345 1K

R1341 470

R1374 470

Q1314 MOTOR SUPPLY SWITCH

SCHEMATIC DIAGRAM - 31

POWER CIRCUIT
SUB IN SUB_O RELAY -DI SENS +DI SENS IH DET DISP HMUT SR_O AC IN +VCC LOW -VCC HI +VCC HI FR_O
<0V> ((0V))0V <0V> ((0V))0V <0V> ((0V))0V <0V> ((0V))0V <0V> ((0V))0V <-63.1V> ((-62.4V))-63.2V <62.7V> ((61.9V))62.8V <0V> ((0V))0V <0V> ((0V))0V <-10.67V> ((-10.7V))-10.61V <-31.35V> ((-30.92V))-31.41V <30.76V> ((30.42V))30.41V <-0.23V> ((-0.23V))-0.22V <4.33V> ((4.34V))4.32V <0V> ((0V))0V <0V> ((0V))0V <0V> ((0V))0V <0V> ((0V))0V <0V> ((0V))0V <-31.02V> ((-30.96V))-31.1V <30.48V> ((30.45V))30.63V <0V> ((0V))0V <-63.2V> ((-62.9V))-63.4V <62.7V> ((62.6V))63V <0V> ((0V))0V

RSN311W64B-P

IN GND
<0V> ((0V)) 0V FL FR SL SR CENT SUB

R501 3.9K R502 3.9K

R513 C507 R514 C508 R516 C510
56K 18P 56K 18P 56K 22P D502 D501

C505 680P

C506 680P

L505 L507

R533.GK 10 R535.GK 10
TO SPEAKER CIRCUIT (CP521) ON SCHEMATIC DIAGRAM-33

H521 /W521

C504 680P

R523 120K

C501 680P
R515 56K C509 22P R517 56K C511 22P R518 C512 R510 3.9K 56K 22P C513 0.047 R519 820K
R526 120K R525 150K D501-D502 RK306LFU1 R527 120K R522 27K R528 150K 6.3V100 R520 10K C514 R521 10K

C502 680P

R524 120K

L505,L507.GK RLQZR73MT-T

C503 680P R507 3.9K

R509 3.3K

R504 15K

R508 3.9K

R503 15K

R567 2.2 R568 2.2

C516 0.01

R511 15K R545 15K

<0V>0V ((0V))[0V] <0V> 0V ((0V)) [0V]
TO MAIN CIRCUIT (CN504) ON SCHEMATIC DIAGRAM-21

KTC3199GRTA

<7.6V> 7.59V ((7.58V)) [7.6V]
<0V>0V ((0V))[0V] <-0.17V>-0.16V ((-0.17V))[-0.17V]
<-0.17V> -0.16V ((-0.17V)) [-0.17V]

D596 MA700ATA

Q501 [7.59V]

R574 470K

6.3V220 R575 150K

+B DGND -VP

<7.59V> 7.59V ((7.58V))
<7.8V> 7.8V ((7.8V)) [7.8V]
<7.82V> 7.82V ((7.81V)) [7.82V]

R571 47K

FL FR SGND SUB CCH SR SL
SWITCH C515 0.01 R506 15K R505 15K C517 0.01 Q501-Q502
POWER CONTROL SWITCH D503 RVD1SS133TA
<7.8V> 7.81V ((7.79V)) [7.8V]

KRA102MTA

R576 5.6K

R512 220K

Q506 ((0V)) [0V]

<0V> 0V

LED7.5V
HIC GND +VCC +7.5V -VCC REF -7.5V 14.7V REF

C569 35V3300P D570 1D3E

C568 35V5600P

C567 35V5600P

C566 35V3300P D569 1D3E
<9.62V> ((9.61V))9.57V
<14.94V> ((15.12V))15.12V
<-28.7V> C575 ((-28.79V))-29.04V 0.01
<18.55V> ((18.63V))18.55V

C577 0.01

<16.13V> ((16.34V))16.37V

<29.72V> ((29.91V))30.15V
<-7.83V> ((-7.85V))-7.88V
<9.05V> ((9.07V))9.04V
<-8.48V> ((-8.5V))-8.55V
<7.01V> ((7.04V))7.03V
<7.31V> ((7.33V))7.34V
<7.87V> ((7.9V))7.9V
RR578 1.5K D572 1D3E R579 3.3K D565 R573 3.9K C572 1000P R572 15K D566

D562 D563

D579 MTZJ9R1CTA D579 R586 1.5K
TO MAIN CIRCUIT (CN503) ON SCHEMATIC DIAGRAM-21
PGND LED+ MO9V -7.5V +7.5V 14.7V FAN DC_DET HP PCONT <27.55V> 27.61V ((27.63V)) [27.7V] <36.9V> 37.1V ((36.3V)) [37.8V] C588 1000P R588 4.7K

C578 R585 10V33 1.2K

C581 50V0.47

C579 16V47

C576 25V100

R587 10K

D561-D563, D565-566, D568 1N5402BM21
E500 C574 50V47 R580 820K C565 0.01
<50.8V>50.9V ((50.6V))[51V]

Q576 VCC +16V REGULATOR

KTC2026
<23.97V> 24.07V ((23.97V)) [24.1V]
<22.14V> 22.22V ((22.11V)) [22.31V]

C580 1000P

C586 63V100 C584 50V100 D586 D585 D584 D583 D582 C582 25V330
<28.17V> 28.22V ((28.24V)) [28.29V] C589 50V10

R581 4.7K

C571 0.1
RVD1SS133TA D580 MTZJ16ATA C570 0.1

RD587 MTZJ30BTA

C587 63V100

C585 50V100

C583 25V330

D581-D586 1D3E

R598 2.2
TO TRANS CIRCUIT (CN502) ON SCHEMATIC DIAGRAM-32

REGULATOR (-VP)

H502 /W502

SCHEMATIC DIAGRAM - 32

TRANSFORMER CIRCUIT (FOR GCS/GC/GCP)
D594 1D3E R596 D597 820K RVD1SS133T A C596 0.01 D598 1D3E C598 1000P

KTC3199GR TA

REGULATOR R592 R18
<5.74V>5.75V ((5.75V))[5.76V]
<6.36V> 6.37V ((6.36V)) [6.37V]
<10.88V> 10.65V ((10.81V)) [11V]
C593 16V1000P C592 R597 1.8K C594 0.01 16V1000P D595 MTZJ6R8A TA D500 RVD1SS133T A RLY502 RSY0040M-0

D592 1D3E D591 1D3E

VOLTAGE SELECT OR CIRCUIT

2SC3940AQST A

REGULATOR +6V SYSTEM CN502
D599 1SS291T A C597 10V22 T501 ETP76VST613A 9 10

8 W9 W5 7

TO POWER CIRCUIT (H502/W502) ON SCHEMA TIC DIAGRAM-31
2 S501 RSR4B008S-Q VOLTAGE SELECT OR

W7 W10 W8 W6 6

110 220

D551-D554 1D3E D552

FPD551

C599 0.1

C591 25V2200
TO PANEL CIRCUIT (H602/W602) ON SCHEMATIC DIAGRAM-28
F2 T2A FC504 FC502 W1 FC503 FC501 L500 RLQZ371 JK500 AC 110V/127V/ 220V-230V/240V 50Hz/60Hz
SYS6V ECONO SYNC FL2 FL1 Q594 SYNCHONISE SWITCH

R595 3.3K

<2.88V> 2.88V ((2.88V)) [2.89V]
<0.76V> 0.77V ((0.76V)) [0.76V]

Onlyuseattachmentslaccessoriesspecifiedbythemanufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.

14) 7)

Do not block any ventilation openings. the manufacturer's instructions. Install in accordance with
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-marl consumerproducts@panasonic.com, or web site (http:/iwww.panasonic.com). In Canada, contact Panaaonic Canada Inc. Customer Care Centre at 1-800-561-5505, or web site (www.panasonic.ca), or an authorized Servicentre nearest you.
Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get most out of your equipment by playing it at a safe level. One lets the sound come through loud and clear without annoying ing or distortion--and, most importantly, without affecting your sitive hearing. We recommend noise. you to avoid prolonged exposure the that blarsen-

NTSC TV

MP3 playback (For areas except Australia, N.Z., and China) You can use this unit to play MP3 format audio recorded for personal use with a computer, etc., onto CD-R or CD-RW. Play may not be possible in some cases due to the condition of the recording. Discs recorded using MP3 differ to CDs in the following ways. Structure of the disc (example)
_1 If you select"NTSC" in =NTSC Disc Output" (m page 50), the picture may be clearer. _2 The factory preset for "NTSC Disc Output" is "PAL60", so no changes to the initial settings are necessary. (If your television is not equipped to handle PAL 525/60 signals the picture will not be shown correctly.) 3 The factory preset for "NTSC Disc Output" is "NTSC", so no changes to the initial settings are necessary. 4 Select "PAL60" in "NTSC Disc Output" (,m page 50). (If your television is not equipped to handle PAL 525/60 signals the picture will not be shown correctFy,) For U.S.A. Canada. Latin America and others The unit can playback only NTSC system discs.

Chapter (Track)

The bottom part of the picture may be cut off if the Video CD played does not comply with standards.
Starting play from a selected chapter Press the numbered buttons and press [ENTER]. Example: Chapter23 [2]_[3]_[ENTER] (Pressing [->101is unnecessary.) Repeat play You can use chapter repeat or title repeat. eProgram play, random play and CD MANAGER You cannot use program play, random play MANAGER.
Not compatible with multi-session recordings If you record MP3 onto CD-R/CD-RW over a number of sessions, this unit can play only the recordings made in the first session. Recordings wil{ not necessarily recorded them be played in the order you
The recordings will be reordered according to their titles: numbers _n numerical order first, upper case in alphabetical order next. and bower case in alphabetical order last. elf you play an MP3 track that includes still picture data. it wilt take some time before the music itself starts playing and the elapsed time will not be displayed during this time. Even after the track starts, the correct play time will not be displayed
Optimum location Distance: A-B-C=D-E

Locating

Front speakers (SB-DKIO) Place so that the superwoofers face out,
Center speaker o(For the Middle East, South Africa and Asia) 1 The medium-sized speaker is the center speaker (SB-PC90). (For U.S.A., Canada and others) The small speaker with the short cord is the center speaker (SB-PC93). The model numbers are printed on the back of the speakers. Surround speakers (SB-PS90) The small speakers with the long cords are surround speakers. Place either side of listening position, or slightly to the rear, about 1 meter higher than ear level with the Panasonic logo facing toward the listening position. The effect varies with the type of music and music source.

RQTS_4

Simple set-up STEP2

The illustrations

Connect the cords

Speakers and TV

show the model for U.S.A., Canada, Australia and N.Z.
to the terminals of same color
oNever short-circuit positive (+) and negative (-) speaker wires eSe sure to connect only positive (red or gray) wires to positive (+) terminals (-) terminals.
and negative (black, blue or gray with blue line) wires to negative

i!il i

_:_i "

Incorrect connection

can damage the speakers
Center and surround speakers
TM (not included) You can connect through the S-VIDEO terminal if your TV has an S-VIDEO terminal (m page 47). Connect directly to your TV. Do not connect the unit through a video cassette recorder, because the picture may not be played correctly due to the copy guard. Twist the vinyl tip and pull off.

===== ,/

:_=_,_ X
i'i Surround speaker (right) (SB-PS90) Center speaker (SB-PCgO/ SB-PC93) Surround speaker (left) (SB-PS90)

(Left)

(Right)

Front speakers

LF stands for low frequency The low frequency cords are red and black HF stands for high frequency The high frequency cords are gray and blue.
Connect the left (L) side in the same way.
Black Twist the vinyl tip and pull off Blue (_ Red

_T5824

Antennas and AC power supply cord

FM indoor antenna

Twist the viny_ tip and pull off. Only for China
For areas except U.S.A., Canada, Australia,

N.Z. and China

Set the voltage (,I below).

AC power supply

before

connection

Fix the other end of the antenna where reception is best. Adhesive tape

__ i_k_

For areas except U.S.A., Canada, Australia, N.Z., China end Asia if the power plug will not fit your socket, use the power plug adaptor (included).
The included AC power supply cord is for use with this unit only. Do not use it with other equipment. Conserving power The unit consumes power even when it is turned off with [POWER _/I]. To save power when the unit is not to be used for a long time, unplug Jtfrom the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again. U.S.A. and Canada: 0.25 W

OFF: No vocal ON: Vocal

Choose "OFF" for karaoke Choose "V1" or "V2" to duet with the player Actual operations details. depend on the disc. Read the disc's instructions for
This feature allows you to mark up to 5 points on a disc so you can return to them easily at a later time.

] To mark a position

SHIFT-_

Press [MARKER]

The marker display appears.

Press [ENTER] to mark.

at the point you want

To mark another

position

MARKER(_ ____ NO marker

Press [MARKER] to display the marker display. (_ Press the cursor buttons [<1] or [_-] to select another "_<". Press [ENTER]

Recalling

a marked

[MARKER].

The marker display appears

Marker I

Press the cursor buttons [<1] or [1_] to highlight the required marker.
Press [ENTER] to recall the position.
To clear a marker Press [MARKER] to display the marker display. (_ Press the cursor buttons [<1] or [1_] to highlight the marker you want to clear. Press [SHIFT] + [CLEAR]
This feature cannot be used; elf the play time for the disc is not displayed. eDudng program (-, page 22) and random play (-_ page 23). oWhile CD MANAGER (-- page 24) is on. eSome subtitles may fail to appear around the marker (DVD). eMarkers clear in the following situations: eThe unit is turned off. eThe disc is changed or removed eA source other than DVD/CD is selected

ULI]er

memoos

Ol olsc

] A-B REPEAT
Repeating chapters, titles and tracks

Press [REPEAT]

Each time you press the button:
DVD (_ CHAPTER REPEAT ( _ ): Current chapter is repeated *_
Q TITLE REPEAT ( _ @ REPEAT OFF: Video CD, CD
): Current title is repeated.

Repeat mode is canceled

: All tracks on the disc are repeated. OdginaF display:

A.BREPEAT REPEAT

Repeat mode is canceled.

DVD only

To cancel repeat play Press[REPEAT] to clear" _

",

eWhen playing Video CDs and CDs, you can combine random play (-_ page 23) or the CD MANAGER (,m page 24) and repeat play.
Repeat play does not work if the play time for the disc is not displayed
To repeat only your favorite tracks Video CD and CD only O Program the tracks you want (.,, page 22). Press [DVD/CD I_] Press [REPEAT] to display "_ ".

_rRepeating

a specific

section

(A-B REPEAT)
Press [SHIFT] + [A-B REPEAT] play at the starting point (A). Press [SHIFT] + [A-B REPEAT] finishing point (B).

Other methods ot disc play

,'3D,j

Plays all tracks on the selected disc or on all discs once each in random order.

_>'_SELECTOR

Select one of two ways to play tracks. 1-DISC: Plays all the tracks on the current disc in random order. ALL-DISC: Plays all the tracks on all loaded discs in random order. Preparation: Press [SELECTOR} to select "DVD/CD". mEnsure a Video CD or CD is in the play position tray. (Random play is not possible if the play position tray contains DVD or is empty.)
Press [PLAY MODE] DOM 1 DISC" or DISC".

to select "RANDOM

"RANALL

CLEAR PLAY 00E M

Each time you press the button: PRGM--,RANDOM 1 DISC--_RANDOM 'L Original display,

ALL DISC l

i'.-_,_..'_-_'_-J '_ __ _. [_--____'_._ !
Random play starts. Press [DVD/CD
Random play is canceled when play stops.

omc :..

To stop Press [a]. Randomplayis also canceled.(The resumefunction is activated and if [DVD/CD Ib] is pressed, normalplay resumes from that point.)
This function skips DVD when ALL-DISC mode is selected. If the disc is a Video CD with PBC, menu play is automatically celed during random play. You cannot skip to tracks already played. /--% ,, _.% /_. : can-
__ -] j. _--'_ __ i =.--'__ __--__ T' T J-- l--

TV IVIDEO

l-Remote control only
. _[___.-!_L-__ _-?. _] Press [DISC] and (within seconds)1]--[5] to [ to select the disc.
After the first track starts playing

TV I VIDEO , -..

Select the buttons.

numbered

:L _l _>1o.
C i.. i Selected track number
To select track 10 or over, press [->10] then the two digits Play starts from the selected track.
When playing Video CDs with PBC, press [HI to stop the disc. then select the track number. PBC is canceled. This does nol work with some Video CDs with PBC

[_.--.--

DISC 1-

DISC 5

Use this function to select specific discs and tracks to play. There are 3 modes 1-track mode: Plays one selected track on the current disc 1-disc mode: Plays the current disc. All disc mode: Plays all loaded discs in succession from current disc to the final disc . These modes make recording CDs easier (-,, page 38), Preparation: Press [SELECTOR] to select "DVD/CD". Ensure a Video CD or CD is in the play position tray. (You cannot use CD MANAGER if the play position tray contains a DVD or is empty.)

Turning AI EQ on

Mainunit: Press [SUPER 3D AI]. Remotecontrol: Press [SHIFT] + [3D All.
The current AI EQ mode is displayed. Press again to select another 3D level. Each time you press the button: AI EQ--*3D AI t --*3D AI 2 'P I

1 "--7

3D AI t : Adds a surround effect to the AI EQ. _-, _ _- _., _ _ " ,_!_'_. (_ SOUND EQ 3D AI 2: Adds a stronger surround effect to the AI EQ.
Adjusting the sound quality

control only

_.'fC, lliJ

3D AI SOUNDO E

Turn on AI EQ and select the level.
Adjust softness and sharpness with [<) or [l_]. Adjust heaviness and lightness with [&] or i_ ].

3D _= EO

The original display is restored on the display panel in about 10 seconds. The level and changes you make are stored and recalled the next time you turn the AI EQ on as described above, or select it with [SOUND EQ] (=,, page 31).
TO cancel Press [SOUND EQ] to select "FLAT". _NN
e"3D AI 1" and "3D AI 2" cannot be selected when you are playing a DVD (except for MIX 2CH mode, -- page 34) or listening to the radio, e"3D AI 1" and "3D AI 2" cannot be selected while a surround system (-, page 33).

_SUPER SOUND EQ

Turning sound.

[_'_Jl'|t_i

_'_Tl_lr_'_ll_ll_
g_ves you a more powerful
on the super sound equalizer

Press [SUPER

The indicator lights.

SUPER SOUNDEQ

To cancel Press[SUPER SOUND EQJso the indicator turnsoff,

r-njoymg

surrouno
The following chart gives a summary of this unit's surround features.
oAII the features are only effective if speakers are used. No discernible effect wilt be heard through headphones. oNone of the features are effective when radio is selected as the source, oYou may experience system off. a reduction in sound quality when these surround systems are used with some sources. If this occurs, turn the surround

Features

eDolby Digital is a discrete 5.1 (6) channel surround system developed for cinema

Software

Software encoded with Dolby Digital can be identified with this mark.
The sound signals are compressed size, allowing an corded on a single
in Dolby Digital format to 1/10 their original entire movie to be reDVD.

DIGITAL

Preparation DOLBY DIGITAL: DOLBY PRO LOGIC:
Turn off the other surround systems Press [SHIFT] + [F1DPL]to turn the light on.
Press [SHIFT 1 [TEST1 to output a test signal Lch: Front left Cch: Center Rch; Front right RSch: Right surround LSeh: Left surround eThe surround channel for Dolby Pro Logic is monaural so the indicator appears as "Sch" instead. _) Press [A] (to increase) or IV] (to decrease). To stop the test signal, press [SHIFT] + [TEST] again.

eUl0_SP

To select a specific speaker 1, Press [SHIFT] + [CH SELECT] to select the speaker. Lch--_Cch--_ Rch --* RSch --_LSch _ SWch t eSWch: Subwoofer (Dolby eThe surround channel for indicator appears as "Sch" 2. Press [,11 to increase) or [, Digital, only when connected) Dolby Pro Logic is monaural so the instead, ! (to decrease). u)

Enjoying surrounO sounO

_S.SRND
Press [S.SRND] "MUSIC".

The button lights

"MOVIE"
Each time you press the button: MUSIC--,MOVIE_STEREO SOUND (off) t I
TO cancel Press[S,SRND] sothe indicator turnsoff.
CH SELECT "_'_ _ _ _" " Turn super surround oft when playing a DVD recorded with 5.1-channel Dolby Digital. The surround effects will not be reproduced correctly if this is left on. S,SRND "''"_ k _i _ _r
Surround speaker level adjustments

Remote contro! only

While playing a source SHIFT -,--_:,=,,_ _. :_ (_) Press [SHIFT] + [CH SELECT). _) Press the cursor buttons [&] decrease). (to increase) or [V] (to

O (_ _ TOPMENU

uelrore recora|ng
Side A I Selection of tapes for recording ]
The unit automatically Tab for side B Tab for side A Normal position/TYPE To re-record Normal tape High position tape High position/TYPE Metal position/TYPE
identifies the type of tape I II IV v' t/ x
Metal position tapes can be used, but the unit will not be able to record or erase them correctly. Discrimination hole
Volume, sound quality and surround effects
Recording level is set automatically. QMulti-channel sources (3 to 5.1 channels) are automatically down-mixed to 2 channels during recording. Turn on dynamic range compression if sound is distorted (,-, Audio-D.Range Compression, pages 50-53). call sound effects are automatically set to flat.

V" A

1 '--' LJ J
Tape Press [SELECTOR] to select "TAPE" and insert a cassette. The radio Press [TUNER, BAND] and tune in the desired station. eSet the volume for timer play.

_' _O '_

,1_1 I_1

13 I I..

I I_.lj

_', I _, ----,

Press [CLOCK/TIMER] "PLAY".
C LOCK-_ _ PLAY _ _) R EC--_ Original display t 1

,.. _ _="Z= _

ON time setting

(_ (Within 8 seconds)

Press [1<t</<t<, v] or [I,_I_/IH_I, to select the start time. @ Press [CLOCK/TIMER].

CLOCK/ TIMER

+l'--I I'-- -:LI P- F-

"-_ 1_4 _F'_ J _

Iw "--_ I'--_ '/ Fl.-'i J j:_"
OFF time setting (it Press [!<</<<, v] or [I,-_/IHH, to select the finish time. @ Press [CLOCK/I'IMER]. ^]
if-f I_. -;_l J F,.. _ "- P,, iF3 I _ --I.l t'-_ ,/ I.-3.--=, I',_" _
Press [_)PLAY/REC] "_)PLAY".
Each time you press the button: (_ PLAY 1' >_) REC -_.O riginal display I

display

[POWER

to turn the

t,-, _LA i

: I'--_ I-..

I-F"

_"-_ p_ ,I F3 _ I

"--_I I F-_:
The timer will start in the set condition at the set time. The volume increases gradually to the set level

_PLAY/ QREC

If you set the timer incorrectly Repeat the procedure from step 1

To cancel

the timer to clear "(_PLAY"

Press [_)PLAY/_REC]

ROTS824

Using the timers

This timer records the radio at the set time+ For U.S.A. and Canada: 12-hour clock For others: 24-hour clock The example shows settings on the 12-hour clock for recording from 6:30 p+m to 8:00 p+m. Preparation: ePress [POWER (_)/I] to turn the unit on, set the time (-. page 12). Press [TUNER, BAND] and tune in the desired station.

e_ o e=

Press ,,[CLOCK/TIMER] _REC.
Each time you press the button: CLOCK--> _) PLAY --, _ R EC--+ Original display CLOCK/ TIMER
ON time setting (_ (Within 8 seconds) Press [1<1</<<, v] or [1_1_/1_,4, ^] to select the start time. (_ Press [CLOCK/TIMER].

_1 t +

t C.LJ
OFF time setting Press [1<</<<, v] or [l_l_/b,4_l, to select the finish time. Press [CLOCK/TIMER]. to
1_;/_'+. _,'___'__ t_L +.____ +-___ __
Press [_PLAY/_REC] "_REC".
Each time you press the button: _) PLAY --, REC_Original display

CLOCK/

i!;f_+J.+_!_____+,_L_j__ L J2_._ u \

Prepare for recording

Select the reverse mode.

(- page 37).

Insert a tape and set the tape direction

to turn

Recording starts 30 seconds volume muted,
before the set time with the
:_+-__+-_:_'::____,'J::__L! ,,. c1.___ ___
,_ , I--_ F -"-_ _,I -++. +-+ _'-+
If you set the timer incorrectly Repeat the procedure from step 1.
_--__ _ _+'__ _--_.. _ I'_-" I I +"_+_ I _ I

,. ;l+_I _'-

To cancel the timer Press [_PLAY/_REC] to clear "_)REC"

(_PLAY/ _)REC

ililil' _ i!liil--.sl;-i
Turning the timers on and off The selected timer comes on at the set time if the indicator ("_)PLAY"

CLOCK] TIMER _)PLAY_ REC

or "_REC") is on. The timer can be turned on and off by pressing [QPLAY/QREC]. Checking the timers eWhile the unit is on Press [CLOCK/TIMER} to select "_) PLAY" or "_)REC", The set timer conditions are shown in the lollowing order. Play timer: start time_.iinish time-->source_volume Record timer: start time.finish time.source lWhile the unit is oft
Press [CLOCK/TIMER}. The clock and the indicator lot the timer that is on are shown. Playing the unit after the timers are set The unit can be used alter the timers are set. Check the lollowing before turning the unit off again. If playing tapes or making a recording: Reset tape direction. If playing discs: Make sure the desired disc is selected
elf you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. ill the unit is on, the timer will not function The unit must be in the standby mode. ill AUX is selected as the source, when the timer comes on, the system turns on and engages AUX as the source If you want to playback or record from a connected unit, set the other unit's timer

FM outdoor antenna
The included front speakers have superwoofers, but by connecting a subwoofer, you can enhance the bass effect found on DVDs encoded with Dolby Digital (.e page 34 for operation).

coaxial cable

Use outdoor antennas if radio reception is poor.

For areas China

except _ 30 mm
15 mm _{_"" Core wire
eDisconnectthe FM indoor antenna eThe antenna should be installed by a competent technician.

AM outdoor antenna

across a window or other con
. "" '''''" For China
AM outdoor antenna e 5-12m --4
' Run a piece of vinyl wire horizontally venient location, Leave the loop antenna connected.
Disconnect the antenna when the unit is eot in use AM loop antenna For areas except China Do not use the antenna during an electrical storm

Using other equipment

Press [POWER (_/I] to turn the unit on.

Press [SELECTOR]

Each time you press the button TUN ER _TAPE-* DVD/CD_AUX
to select "AUX".

Operate

the unit.
See the unit's manual for details on operation and connection.
a) Preparation: ePress [POWER S/I] to turn the unit on. eDo the preparatory steps (-- page 37).
Each time you press the button TUNER _TAPE --_DVD/CD-*AUX
Press [OREC/STOP]. Start the source

to be recorded.

To stop recording Press [OREC/STOP].

eREC/STOP

TV POWER TV/VIDEO
YOU can use the remote control to operate a Panasonic television.
Turning the television on/off
Press [SHIFT] + [TV POWER].
Switching the television's video input mode

Changing channels

+ [TV/VIDEO]. -t- [TV CH UP], [TV CH

Press [SHIFT] DOWN].

Some models cannot be operated by this remote control

TV CH DOWN TV CH UP

RQ75824

Initial settings

Change the initial settings to suit your preferences and to Suit the unit to the environment in which it is being used. These settings are retained in memory until they are changed, even if the unit is turned off.

'_:::L_

RETURN SELECTOR
See pages 50-53 for menu and option details.
Press [SELECTOR] to select "DVD/CD". Preparation: For Australia, N.Z., China, the Middle East, South Africa and Asia
Press [SHIFT] -t- [SET UP].
For U.S,A., Canada and others

Press [SHIFT].+

[ACTION].

--_ O '1=

Some discs are designedto start in a certain language despite any changes you make here.
eThe password screen is shown if you choose levels 0 to 7 (=' page 54), eSelect "Level 0" to prevent play of discs that do not have ratings levels recorded on them. The password screen is shown when you select "Ratings" if levels 0 to 7 have been selected (-' page 54). {3 "O I=
i Level 8: i Level 1 to 7: i I Level 0:

Field:

Less blurred field stills are shown. Select if jittering occurs when "Automatic" is selected.
Frame: Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when "Automatic" is selected.
speakers cannot be located in the idea_ position,
Turn dynamic range compression on in the following cases. For clear dialogue when listening at low volume. When sound is distorted while playing multi-channel DVD audio through two channels (when headphones are connected, during recording, or when using the MiX 2CH mode).

Entering

a password

When setting ratings

The password

(When the level is 8)

When changing ratings
(When the level is 0 to 7)
screen is shown when you select levels O to 7 with the numbered buttons and press
The password screen is shown when you select "Ratings". 1 Input your 4-digit password with the numbered buttons and press [ENTER].
1. Input a 4-digit password [ENTER].

o 1= 0=

then priNTER.

I UPJo_k ::,I P=W_r

_assword_ I Change Level I I Temporary Unlock I
elf you enter a wrong number, press [4] to erase it before you press [ENTER]. The lock symbol appears closed to show the rating is locked. Do not forget your password. 2. Press [ENTER] to confirm the 4 digits. Now, when you insert a DVD that exceeds the ratings limit you set, a message appears on the television. Follow the on-screen instructions.
2. Select the item with [_.], [V] and press [ENTER] and follow the on-screen instructions.

Language code list

6566: Abkhazian 6565: Afar 6570: Afrikaans 8381 : Albanian 6577: Ameharic 6582: Arabic 7289: Armenian 6583: Assamese 6588: Aymara 6590: Azerbaijani 6665:Bashk8 6985: 6678: 6890: 6672: 6682: 6671 : 7789: 6669: 7577: 6765: 9072: 6779: 7282: 6783: 6865; 7876: 6978: 6979: 6984: 7079:
7074: Fiji 7073: Finnish 7082: French 7089: Frisian 7176: Galician 7565: 6869: 6976: 7576: 7178: 7185: 7265: 7367: 7273: 7285: 7363: 7165: 7378: Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hunganan Icetandic Irish Indonesian
7679: Laotian 7684: Lithuanian 7775: Macedonian 7771 : Malagasy 7783: Malay 7776: Malayalam 7784: Maltese 7773: Maori 7782: MarathJ 7779: Moldavian 7778: Mongolian 7865: Nauru 7869: 7879: 7982: 8065: 8083: 7065: 8076: 8084: 8185: 8277: 8279: 8285: 8377: 8365: 7168: 8382: 8372: 8378: 8368: Nepali Norwegian Oriya Puniabi Pashto, Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi

MPEG 2, the video compression standard adapted for use with DVD, codes frames using these three picture types. I: Intra coded picture (I-picture) This is the standard picture and is a complete picture in itself. This means it has the best picture quality and is the best to use when adjusting the picture. P: Predictive coded picture (P-picture) This picture is calculated based on past I and P-pictures. B: Bidirectionally-predictive coded picture (S-picture) This picture is calculated by comparing past and future I and Ppictures so it has the lowest volume of information.
This is the number of samples of sound taken per second during conversion to a digital signal. Sampling frequency is expressed in kilohertz (kHz). A high sampling frequency results in a sound close to the original when played back.

vvurrunLy

u,o./_./
Panasonic Safes Company, Division of Matsushita Corporation of Puerto Rico, Inc, Ave. 65 de Infanteria, Kin. 9.5, San Gabriel _ndustrial Park, Carolina, Puerto Rico 00985 Electric
Panasonic Consumer Electronics Company, Division of MatsushRa Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094
Panasonic/Technics Limited
Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively relerred new or refurbished parts to as "the warrantor") will repair this product with in the event of a defect in materials or workmanor Puerto purchase) Rico as follows (all time ship, free of charge, in the US.A periods start from the daie of odginal AUDIO PRODUCTS--labor RACKS STAND

Audio Warranty

This warranty manship which occur

Products

only covels during failures normal due to defects use and does in materials not cover and worknormal wear
!o the stylus (when applicable) or a dealer installed cartridge or stylus The warranty does not cover damages which occur in shipmenl or failures which are caused by products not supplied by the warrantor, or failures whicb result from accident, misuse, abuse, neglect, mishandling, faulty installabon, misapplication, set-up adjustments, maladjustment of consumer controls, improper operation or maintenance, improper antenna, inade-
and parts for one (1) year SPEAKERS-ADAPTER_-one

ALL AUDIO TECHNICS

tcabinetst--parls only 30 days ALONE SPEAKERS SUBWOOFER COMPUTER unit with CARD
labor and parts for lhree (3) years. usa READER-WRITER. PERSONAL (when applicable)--exchange for one (1) year A_CESSORIES-ADAPt--labor R_HARGEABLE item for new one warranted. SD MEMORY plicable) exchange rechargeable battery defective

quate surge,

signal reception improper voltage
or pick-up, alteration, modification, supply, lightning damage, commercial

kHz step) kHz step) kHz step) 500 _JV/m
Track system Heads Record/playback Erasure Motor Recording system Erasing system Tape speed 4 track, 2 channel Solid permalloy head Double gap ferrite head DC serve motor AC bias 100 kHz AC erase 100 kHz 4.8 cm/s (17/Bips)
Overall frequency response (+3, -6 dS at DECK OUT) NORMAL (TYPE I) 35 Hz-t4 HIGH (TYPE II) 35 Hz-14
Speakers Super woofer 14 cm cone type Woofer 12 cm cone type Tweeter 6 cm cone type Super tweeter Piezo type Impedance High frequency 6 LOWfrequency 8 Input power High frequency 60 W (Music) Low frequency t 20 W (Music) Output sound pressure level 87 dB/W (1.0 m) Cross over frequency 150 Hz, 5 kHz, 10 kHz Frequency range 45 Hz-22 kHz (-16 dB) 55 Hz-20 kHz ( tOdB) Dimensions (WxHxD) 173315x315 mm Mass 4.1 kg
[ For Australia and N.Z._ Power supply AC 230-249 Power consumption Dimensions Mass GENERAL ]For China] Power supply Power consumption Dimensions Mass (WXHXD) (WXHD)
V, 50 Hz f 86 W mm 8.2 kg

218.4x315x350

AC 220 V, 50 Hz t95 W 215.4x315x350 mm 8.2 kg

kHz kHz

SIN ratio 50 dB (A_WTD) Wow and flutter 0.18 % (WRMS) Fast forward and rewind time Approx. 120 seconds with C-60 cassette tape Power consumption in standby mode: 0.6 W
Notes: t, Specifications without notice, Mass 2. Total are subject to Change
and dimensions harmonic spectrum
are approximate is measured by analyzer

distortion

the digital
Specifications I For U.S.A., Canada,
[For U.S.A. and Canada J Stereo mode power output RMS power output THD 10 %, both channels driven LF 75 Hz 65 W per channel (8 Q) HF 1 kHz 30Wper channel(6Q) Total stereo mode power 190 W LF 55 Hz-100 Hz 65 W per channel (8 Q) HF 100 Ha-15 kHz 28 W per channel (6 Q) Power ot_tput in Homo Theater mode RMS power output THD 10 %, both channels driven Front LF 75 Hz 65 W per channel 18Q) HF lkHz 30Wperchannel(6Q) Center 1 kHz 40 W (8 Q) SurrouNd 1 kHz 35 W per channel (8 Q) Total power output Input sensitivity AUX Input impedance AUX 300 W 280 mV 10 kQ

Latin America,

and others I
Track system Heads Record/playback Erasure Motor 4 track, 2 channel Solid permalloy head Double gap territo head DC servo motor AC bias 100 kHz AC erase 100 kHz Type 1 way, 1 speaker, closed system Speaker Full range 8 cm (3%") cone type Impedance 8 Q Input power 70 W (Music) Output sound pressure level 84 dB/W (I.0 m) Frequency range 130 Hz-20 kHz (-16 dB) 150 Ha-18 kHz (-10 dB) Dimensions (WXHXD) 140x99x Mass 118 mm (5 V2"X 3_/_ "X 42%2") Approx. 0.9 kg (2.0 lb.) speakerSB-PC93] Type DISC SECTION Disc DVD-Video 8 cm/12 cm single-sided, single-layer 8 cm/12 om single-sided, double-layer 8 cm/12 cm doubJe-sided, double-layer (One layer pet side) Video CD/CD 8 cm/12 cm (CD-R/RW) Video Signal system NTSC 1 way, I speaker, closed system