Reviews & Opinions
Independent and trusted. Read before buy Panasonic SA-PM193!

Panasonic SA-PM193

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Panasonic SA-PM193, size: 2.4 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Panasonic SA-PM193About Panasonic SA-PM193
Here you can find all about Panasonic SA-PM193 like manual and other informations. For example: review.

Panasonic SA-PM193 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Panasonic SA-PM193 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Panasonic SA-PM193 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
Stewart 4:43am on Thursday, October 28th, 2010 
Have had it for 3 weeks. Super picture. Flawless installation and top quality performance. Purchased from Costco where the warranty has no end date.
tony r 3:46pm on Friday, October 1st, 2010 
good picture brakes after 3 months beautiful top class picture at a decent price. Shipping arrangement a little difficult but worth it... FREE Very good value. Excellent picture, audio is terrific. none
JustinTime 7:31am on Sunday, September 12th, 2010 
Panasonic TH-50PX60B - Excellent Value I have had this Plasma TV for over 2 years. panasonic plasma 37" sleek sexy and great picture...on dvds and most channels although some digital channels look quite pixelated .. Panasonic Purple Snakes I have read the reviews about the screen and after owning it for 4 months I have to say I am not altogether happy with it.
Qaddosh 9:58pm on Friday, August 27th, 2010 
Great picture for 58 inch which are hard to f...  great picture for 720, nice hd. you need a good hd signal though broke after 3 years.
sebastiaanveld 5:16pm on Tuesday, August 24th, 2010 
I have had this tv for 5 months and only been able to use it for 3 of the five, the other two waiting on Panasonic to fox it. After much research, this was my pick. Crisp, clear, razor sharp picture. Controler could be larger, small keys hard to see in dim light. I bought mine at Beach Camara. Big and inexpensive Does not work at all!
tobby 3:20am on Monday, July 5th, 2010 
Great picture for 58 inch which are hard to find in plasma, cost too high for 720 picture. Great TV and a great value. At the time a I ...  Owned the unit for approximately 18 months with not a single issue.
abslenny 9:32am on Friday, April 30th, 2010 
Overall this is an above average tv that I would recommend to anyone looking to by a 42" plasma tv. It is very thin and easy to set up.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

CD Stereo System

Operating Instructions
For U.S.A. As an E NERGY S TAR Partner, Panasonic has determined that this product meets the E NERGY STAR guidelines for energy efficiency.

Model No.

SC-PM19 SC-PM193

Table of contents

Before use
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. SC-PM193 is available in the U.S.A only
Supplied accessories.. IMPORTANT SAFETY INSTRUCTIONS. Product Service.. Listening caution. The remote control.. Placement of speakers.. Connections.. Front panel controls. Demo function... Setting the time.. Convenient functions..

Listening operations

The radio: manual tuning.. The radio: preset tuning.. CDs... Enjoying MP3.. Cassette tapes... 20

Recording operations

Before recording.. Recording the radio.. Recording CDs.. Auto-off function.. 22 22

Timers and others

Using the timers.. Using the sound quality settings.. Enhancing the sound quality.. Using an external unit.. 25 25

Reference

Troubleshooting guide.. 26 Warranty (ONLY FOR U.S.A.).. 27 Customer Services Directory (ONLY FOR U.S.A.).. 27 Specifications.. Back cover Maintenance. Back cover When moving the unit.. Back cover

RQT7364-P

RQT7364-P_FC

29/12/03, 5:56 pm

Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following system.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

System

Main unit Speakers

SC-PM19

SA-PM19 SB-PM19

SC-PM193

SA-PM193 SB-PM193
The model number and serial number of this product can be found on either the back or the bottom of the unit. Please note them in the space provided below and keep for future reference. MODEL NUMBER

SERIAL NUMBER

User memo:
DATE OF PURCHASE DEALER NAME DEALER ADDRESS TELEPHONE NUMBER

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

Except for U.S.A.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Product Service

1. Damage requiring service The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. ServicingDo not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement partsWhen parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety checkAfter repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

Listening caution

EST. 1924
Selecting fine audio equipment such as the unit youve just purchased is only the start of your musical enjoyment. Now its time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Associations Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortionand, most importantly, without affecting your sensitive hearing. We recommend that you avoid prolonged exposure to excessive noise. Sound can be deceiving. Over time your hearing comfort level adapts to higher volumes of sound. So what sounds normal can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. To establish a safe level: Start your volume control at a low setting. Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

Product information

For product information or assistance with product operation: In the U.S.A., refer to Customer Services Directory below. For assistance in the continental U.S.A. in obtaining repairs please ship the product to: Panasonic Services Company - Customer Servicenter Suite B 4900 George McVay Drive McAllen, TX 78503 In Puerto Rico contact the Panasonic Sales Company. Tel. (787) 750-4300 Fax. (787) 768-2910 When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Also, the purchaser will be responsible for shipping the unit to the above address. In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

R6, AA, UM-3

A The remote control
I Batteries Insert so the poles (+ and ) match those in the remote control. Do not use rechargeable type batteries. Do not: mix old and new batteries. use different types at the same time. heat or expose to flame. take apart or short circuit. attempt to recharge alkaline or manganese batteries. use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. I Use Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. Refer to page 7 for the remote control sensor position.

B Placement of speakers

Speakers are designed identically so that no left or right channel orientation is necessary. Notes Keep your speakers at least 10 mm (13/32) away from the system for proper ventilation. These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.

C Connections

Plug the AC power supply cord into a household AC outlet only after all other connections have been made. To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off.

You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc.

A FM outdoor antenna

LOOP 75
Disconnect the FM indoor antenna if an FM outdoor antenna is installed. Note An outdoor antenna should be installed by a qualified technician only.
AM outdoor antenna (not included)

B AM outdoor antenna

Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location. Note When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during a lightning storm.

5-12 m

T AM AN 75
LINE OUT position Analog player (not included)
AM loop antenna (included)
External unit connections
Make sure that the power supply for all components has been turned off before making any connections. For details, refer to the operating instructions of the unit which is to be connected. All peripheral components and cables sold separately.

AUX R L

(L) (R)
C Connecting analog equipment
This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch. When units other than those described are to be connected, please consult your audio dealer. Note Only an analog player with a built-in phono equalizer can be connected. Set the switch to the LINE OUT position at the back of the analog player.

Rear panel of this unit

30/12/03, 10:34 am

Top of the unit

Front panel controls
1 Cassette lid 2 Cassette open button (OPEN 0). Standby/on switch (yI POWER).. 9

Main unit

# $ % & ( ) ~ + ,

PHONES

DEMO CD CHECK

OPEN/ CLOSE

"

Remote Control

3 / : ; < = > ? @ [ \ ]

_ { ( , | + 8 }

Buttons such as function in exactly same way as the buttons on the main unit. Auto off/Sleep timer button (AUTO OFF, SLEEP)... 22, 24 Disc button (DISC).. 13 CD Program, tuner preset button (PROGRAM)... 10, 15 Play mode select button (PLAY MODE). 9, 13 Use this for selecting CD play mode, tune mode and FM mode. Repeat button (REPEAT).. 14 Delete button (DEL).. 18 Album selection button (ALBUM, ).. 16 Intro button (INTRO)... 17 Marker memory/recall button (MARKER).. 19 Shift button (SHIFT) To use functions labelled in orange : While pressing [SHIFT], press the corresponding button. For buttons [AUTO OFF], [CLOCK/TIMER], [PLAY/REC] and [SURROUND]. Surround, Super sound EQ button (SURROUND, S.SOUND EQ).. 25 Play timer/record timer/Dimmer button (PLAY/REC, DIMMER).. 8, 23 Clock/timer/CD display button (CLOCK/TIMER, DISPLAY).. 8, 14 Numbered, character buttons (h10, 1-9, 0, A-Z, SPACE!#).. 10, 18 Stop/clear button (7 CLEAR).. 15 Enter button (ENTER).. 18 Title search mode select button (TITLE SEARCH)... 18 Muting button (MUTING).. 8 Preset EQ/Manual EQ button (SOUND). 25

S.SOUND EQ

ALBUM/ TRACK

TUNER BAND

VOLUME

CD CHANGE

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. AC supply indicator (AC IN) This indicator lights when the unit is connected to the AC outlet. Super sound EQ button (S.SOUND EQ). 25 Aux button (AUX)... 25 Tuner/band select button (TUNER/BAND). 9 CD skip/search, tape fast-forward/rewind/TPS, tune/ preset channel select, time adjust buttons (4/REW/4, 3/FF/). 9, 11, 20, Stop and demonstration button (STOP 7, DEMO)... 8, 11 Checking CD position (CD CHECK). 12 CD trays Remote control sensor Display Album/track selection button ( ALBUM/TRACK ).. 16 Recording start/pause button (/8 REC).. 21 CD play/pause button (CD 3/8).. 11 CD change button (0 CD CHANGE).. 12 CD tray open/close button (0 OPEN/CLOSE).. 11 Volume control (VOLUME DOWN, UP). 9 Tape play button (TAPE 3).. 20 Headphone jack (PHONES).. 25 CD selection (CD 1~CD 5).. 12

STOP , DEMO

A Demo function
When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting DEMO ON.
Press and hold [STOP 7, DEMO].
The display changes each time the button is held down.

DEMO OFF DEMO ON

While in the standby mode, select DEMO OFF to reduce power consumption.

B Setting the time

This is a 12-hour clock.
Press [y] to turn the unit on. y Press [SHIFT] + [CLOCK/TIMER] to display CLOCK.
Every time you press the button:
CLOCK PLAY Original display
Within 5 seconds Press and hold [4/REW/4] or [3/FF/] to set the time. Press [SHIFT] + [CLOCK/TIMER].
Displaying the clock: Press [SHIFT] + [CLOCK/TIMER]. The clock is shown for about 5 seconds. Note The clock may lose or gain some time over a period. Readjust if necessary.

CLOCK/ TIMER

C Convenient functions

4/REW 3/FF

To dim the display panel Press [DIMMER].
The display brightness will be reduced except for [AC IN] indicator. To cancel, press [DIMMER] again.

To mute the volume

DIMMER

Press [MUTING].

To cancel, press [MUTING] again. Muting can also be cancelled by lowering the volume all the way to --dB. When the system is turned off, the muting operation will be automatically cancelled.

4/REW/4, 3/FF/

(CD 1) ~ (CD 5)
Listening to CD on a single tray

0 OPEN/ CLOSE

Press [0 OPEN/CLOSE] to insert the CD on the disc tray. Press again to close. Press [CD 3/8] to start play from the first track. The player stops after playing the last track. Adjust the volume.

Action

To stop the disc pause play
Press [STOP 7 ,DEMO]. Press [CD 3/8]. Press again to resume play. skip tracks Press [4/REW/4] or [3/FF/]. search through Press and hold [4/REW/4] or [3/FF/ tracks ] during play or pause. view CD indicator The CD indicator on the display lights whenever the tray is in the playing position. start one touch play If the unit is in standby mode and a CD is loaded, press [CD 3/8] or [CD 1] ~ [CD 5]. The unit will come on automatically and play will start.

A CD selection and care

Only play CDs with COMPACT disc DIGITAL AUDIO trademark. (see ) Do not; Use irregularly shaped CDs. ( ) Attach extra labels and stickers. Use discs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. ( ) Attach scratch-proof covers or any other kind of accessory. Write anything on the CD. Clean CDs with liquids. (Wipe with a soft, dry cloth.) Use CDs printed with label printer available on the market.

To prevent damage

Always observe the following points. Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. Do not move the system while tray is opening/closing, or when loaded. Always unload all CDs before moving the system. Do not put anything except a CD in the tray. Do not use cleaning CDs or CDs which are badly warped or cracked. Do not disconnect the AC power cord from the household AC outlet during CD changing operation.
STOP 7, DEMO CD CHECK CD 6
Listening to a CD placed in a specific tray
Preparation: Press [CD 3/8] and then [STOP 7, DEMO].
Placing a CD in your desired tray

Label must face upward.

Press [0 CD CHANGE]. (Within about 10 seconds) Press [CD 1] ~ [CD 5] and insert the CD on the tray. Press [0 CD CHANGE] again to close.
Repeat steps 1 and 2 to insert up to 5 CDs.

Disc tray

Tray number
Listening to the CD placed in a specific tray

0 CD CHANGE

Press [CD 1] ~ [CD 5] to start play.
The player stops after playing the last track.
To remove the CD You can change the CDs in the other trays while one CD is playing (except in All-Disc Random play or program play). Press [0 CD CHANGE]. Press [CD 1] ~ [CD 5]. Press [0 CD CHANGE] again to close the tray.

A Album skip play

During play or stop Press [ALBUM ( or )] to select the desired album.
You can also press the center button of [ ALBUM/TRACK ], followed by [4 or ] on the main unit to select an album. When selecting in the stop mode: Press [CD 3/8] to start play.

7 CLEAR

B Track skip play During play or stop Press [4/REW/4] or [3/FF/] to select a desired track.
You can also press the center button of [ ALBUM/TRACK followed by [4 or ] on the main unit to select a track. When selecting in the stop mode: Press [CD 3/8] to start play. ],
Note During 1-ALBUM mode, track skipping can only be done within the current album.
C Starting play from a desired track in a desired album
Preparation: Press [CD 3/8] and then [7 CLEAR].

Press [ALBUM (

)] to select the album.
You can also press the center button of [ ALBUM/TRACK ], followed by [4 or ] on the main unit to select an album.
Press the numeric buttons to select your desired track in the current album.
For two digit numbers, press [h10] once then the two digits. For three digit numbers, press [h10] twice then the three digits.

RQT7364-P_16-20_EN

30/12/03, 10:37 am
A INTRO function (Album scan)
Listen to the first track of all albums in the current disc for 10 seconds each to find your desired album. Preparation: Press [CD 3/8] and then [7 CLEAR].
Press [INTRO] to start INTRO function.
(INTRO function is cancelled after playing the first track in the last album on the current disc.)
While your desired album is playing, press [CD 3/8].
Play starts from the first track of the album.
To stop during the process, press [INTRO] or [7 CLEAR].
B CD Play Mode function for MP3
Mode To play one selected disc. play all loaded discs in succession from the selected disc to the final disc. play one selected track on the selected disc. play one selected album on the selected disc.
1-DISC ALL-DISC 1-TRACK 1-ALBUM
Press [PLAY MODE] to select:
1-DISC ALL-DISC 1-ALBUM 1-TRACK
Press [DISC] and (within 10 seconds) [1][5] to select and start the disc.
When you have selected 1-TRACK in step 1, press the numeric buttons to select and play will start.

STOP7, DEMO

Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. Tape slack can get caught up in the mechanism and should be wound up before the tape is played. Endless tapes can get caught up in the decks moving parts if used incorrectly.

OPEN 0

To find the beginning of a program (TPS: Tape Program Sensor)
TPS finds the beginning of a track and resumes play from there. Each press increases the number of tracks skipped, up to a maximum of 9.
Press [4/REW/4] or [3/FF/] during play. 4 3
Insert inside the guides Forward side

TAPE 3

Note The TPS function searches for silent parts of about 4 seconds in length which are normally found between tunes. As a result, it may not function properly in the following cases: With short silent parts When noise occurs between tunes With silent parts found within tunes

Before recording

Side A
Only normal position tapes are recommended. Remove tabs to prevent recording. To record, cover tabs as shown. Volume and sound quality during playback have no effect on recording.

Tab for side B

Tab for side A

To re-record Normal tape

1 Press [TAPE 3] and then [STOP 7, DEMO]. 2 Insert the recorded cassette with the tape facing out. 3 Press [/8 REC].

Preparatory steps

Wind up the leader tape to begin recording immediately. Preparation: Press [TAPE 3] and then [STOP 7, DEMO] to select tape as the source.
To erase a recorded sound
Press [OPEN 0], insert a cassette with the tape facing out.

A Recording the radio

Preparation: Do the preparatory steps as above.
Tune to the required station.

(\ page 9)

Press [/8 REC] to start recording.
Action Press [STOP 7, DEMO]. Press [/8 REC]. Press [/8 REC] again to resume recording. Press [/8 REC] during the unnecessary part. Press [/8 REC] again to resume recording. Turn the tape over and press [/8 REC].
stop recording stop recording temporarily
cut an unnecessary part while recording
record on the other side of the tape

RQT7364-P_21-22_EN

A Recording CDs
Mode To record one selected disc. record all loaded discs in succession from the selected disc to the final disc. record one selected track on the selected disc. record one selected album on the disc. record the disc in random order. record all loaded discs in random order.

1-DISC ALL-DISC 1-TRACK 1-ALBUM (MP3) 1-RANDOM A-RANDOM
Press [CD 3/8] and then [STOP 7, DEMO]. Press [PLAY MODE] to select your desired mode. For 1-TRACK mode
Press [4/REW/4] or [3/FF/] to select the track. 4 3

STOP 7

For 1-ALBUM mode (MP3)

For 1-DISC/1-RANDOM mode

Do steps 1 to 3 on page 13. Ensure CD is stopped.
Action Press [STOP 7, DEMO]. Press [/8 REC]. If the tape finishes before the CD, press [STOP 7, DEMO] to stop the CD. Press [/8 REC] to resume recording.

AUTO OFF SLEEP

To record programmed tracks
This function allows you to record up to 24 programmed tracks.
Programme the track(s) you want.
(\ steps 1 - 6 on page 15)

B Auto-off function

To save power, the unit turns off if it is left unused for 10 minutes. This function works only if CD or tape is selected as the source. This function does not work if the source is tuner or AUX.
Press [SHIFT] + [AUTO OFF].
AUTO OFF is shown on the display. To cancel Press [SHIFT] + [AUTO OFF] again to clear AUTO OFF from the display. For your reference The setting is maintained even if the unit is turned off. When the unit is turned on again, AUTO OFF is displayed and the unit functions as described above. AUTO OFF disappears from the display if either tuner or AUX is selected as the source but continues to function normally.

Using the timers

Using the play/record timer
The timer can be set as an alarm or radio recorder. Play timer and record timer cannot be used together. Preparations: Turn the unit on and set the clock (\ page 8).
Timer Play timer Record timer
Action Prepare the music source you want to listen to; tape, CD, radio or aux, and set the volume. Check the cassettes erasure prevention tabs (\ page 21), insert the cassette and tune to the radio station (\ page 10) or select the aux source (\ page 25).

For Record Timer

Press [SHIFT] + [CLOCK/TIMER] to select:
Every time you press the button: CLOCK REC PLAY

Original display

For Play Timer
Timer CLOCK PLAY REC Original display REC ON
To set the clock. set the play timer. set the record timer. resume original display.

PLAY ON

Setting the start and finish times

(Within 3 seconds)

PLAY OFF
1 Press [4/REW/4] or [3/FF/] to select the starting time. 2 Press [SHIFT] + [CLOCK/TIMER]. 1 Press [4/REW/4] or [3/FF/] to select the finishing time. 2 Press [SHIFT] + [CLOCK/TIMER].
Press [SHIFT] + [PLAY/REC] to select:

PLAY REC

Turning the timer on

REC OFF

No display (off)
To turn on the play timer. turn on the record timer. turn off.

MANUAL EQ PRESET EQ

SHIFT SURROUND

Press [SOUND] to select:

Each time you press the button: Sound quality Adds punch to rock Clarifies higher frequencies For background music Adds gloss to vocal Cancelled
Setting HEAVY CLEAR SOFT VOCAL EQ-OFF

Manual EQ

Press and hold [SOUND] to select MANUAL EQ.

PRESET EQ MANUAL EQ

Press [SOUND] to select a setting.
Each time you press the button:
BASS TREBLE Original Display
Press [VOL ] or [+ VOL] to adjust the level.
The tone level can be varied within a range of -3 to +3.
Notes Preset EQ cannot be used together with Super Sound EQ. Changes to sound quality do not affect recordings.
B Enhancing the sound quality

Press [S.SOUND EQ].

The button light is on.
Press the button again to cancel.
The button light goes out.
Using the live effect (SURROUND) Press [SHIFT] + [SURROUND] to add natural width and depth to the stereo sound. indicator will appear.

VOL VOL

1 Press [AUX]. Proceed to step 3. 2 For listening: Press [/8 REC] (recording starts). 3 For recording:units the externalmanual.) (For details, refer Start playback from source. to the external instruction
Listening with headphones
Reduce the volume level, and connect the headphones. Plug type: 3.5 mm stereo. Note Avoid listening for prolonged periods of time to prevent hearing damage.

C Using an external unit

To cancel Press [SHIFT] + [SURROUND] to clear the indicator. When listening through headphones, the effect is less discernible than through the units speakers. If interference in FM stereo reception increases, cancel the surround sound effect.

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the Customer Services Directory on page 27 if you reside in the U.S.A., or refer to the Product information on page 4 if you reside in Canada.
Reference pages are shown as black circled numbers. Common Problems No sound. Turn the volume up. The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the unit on. 6 Check the speaker connections. 6 An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords away from this units cables. Incorrect operation performed. Read the instructions and try again. You plugged the AC power supply cord in for the first time or there was a power failure recently. Set the time. 8 Check and correct the speaker cord connections. 6 If this does not fix the problem, there is a power supply problem. Consult the dealer. Use an outdoor antenna. 6
Sound is unfixed, reversed or comes from one speaker only. Humming heard during play. ERROR is displayed. : appears on the display. F61 is displayed. Listening to the radio Noise is heard. The stereo indicator flickers or doesnt light. Sound is distorted. A beat sound is heard. A low hum is heard during AM broadcast.

Turn the TV off or separate it from the unit. Separate the antenna from other cables and cords.
When there is a television set nearby The picture on the TV disappears or stripes appear on the screen. Using the cassette deck Recording is not possible. Playing discs The display is wrong or play wont start. The disc may be upside down. # Wipe the disc. Replace the disc if it is scratched, warped, or non-standard. Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again. The disc may be scratched, or its data may be defective. Replace the disc. If the erasure prevention tabs have been removed, cover the holes with adhesive tape. The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna. 6 The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
The total number of tracks displayed differs each time the same disc is inserted. Unusual sound is heard. CD-RW cannot be read. VBR is displayed instead of the remaining play time.
The disc was incompletely formatted. Use the recording equipment to fully format the disc before recording. The unit cannot display the remaining play time for variable bit rate (VBR) tracks. There is a problem with the disc mechanism. (A power failure may have occurred.) The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the tray, close it. The unit will make the disc changing noises for a few moments and then it should operate normally. Check that the batteries are inserted correctly. 5 Replace the batteries if they are worn.
TAKE OUT/DISC appears on the display.
The remote control Remote control doesnt work.

RQT7364-P_26-28_EN

29/12/03, 2:30 pm
Warranty (ONLY FOR U.S.A)
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infantera, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985

70 W (Max) 70 W (Max) 80 dB/W (1.0 m) 55 Hz22 kHz (16 dB) 70 Hz20 kHz (10 dB) 128 mm x 250 mm x 222 mm (51/32 x 927/32 x 83/4) 1.95 kg (4.30 lbs.)

GENERAL

Power supply Power consumption Dimensions (WxHxD) Mass AC 120 V, 60 Hz 130 W 179 mm x 250 mm x 383 mm (71/16 x 927/32 x 153/32) 5.24 kg (11.55 lbs.)

FM TUNER SECTION

Frequency range 87.5 MHz 108.0 MHz (100 kHz steps) 87.9 MHz 107.9 MHz (200 kHz steps) Sensitivity 1.5 V (IHF) 1.5 V S/N 26 dB Antenna terminal(s) 75 (unbalanced)
Power consumption in standby mode: 0.8W Notes: 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by the digital spectrum analyzer. 3. The labels HIGH and LOW on the rear of the speakers refer to High frequency and Low frequency.

AM TUNER SECTION

Frequency range 520kHz 1710 kHz (10 kHz steps) Sensitivity S/N 20 dB (at 1000 kHz) 560 V/m

CASSETTE DECK SECTION

Track system Heads Record/playback Erasure Motor Recording system Erasing system Tape speed Overall frequency response (+3 dB, 6 dB at DECK OUT) NORMAL (TYPE I) S/N RATIO Wow and flutter Fast forward and rewind time 4 track, 2 channel Solid permalloy head Double gap ferrite head DC servo motor AC bias 100 kHz AC erase 100 kHz 4.8 cm/s 35 Hz 14 kHz 45dB (A weighted) 0.10% (WRMS) Approx. 120 seconds with C-60 cassette tape

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included).

CD SECTION

Disc CD, CD-R, CD-RW, MP3 Sampling frequency Decoding Beam source/wavelength Number of channels Frequency response Wow and flutter 8 cm/12 cm (33/20/473/100) 44.1 kHz 16 bit linear Semiconductor laser/780 nm Stereo 20 Hz20 kHz (+1dB, 2 dB) Below measurable limit

When moving the unit

Remove all discs. Press [ /I POWER] to turn the unit off. Disconnect the AC power supply cord.
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (PSC)

Panasonic Canada Inc.

5770 Ambler Drive Mississauga, Ontario, L4W 2T3 www.panasonic.ca
One Panasonic Way Secaucus, Ave. 65 de Infantera, Km. 9.5 New Jersey 07094 San Gabriel Industrial Park, Carolina, http://www.panasonic.com Puerto Rico Matsushita Electric Industrial Co., Ltd. Printed in Malaysia

doc1

iiii::ii

Dear customer

Thank you for purchasing this producL For optimum performance and safety, please read these instruclions carefully. These operating instructions system. are applieabb to the following

THE FOLLOWING

APPLIES ONLY IN THE U,S,A.

CAUTION:

This equipment has been tested and found to comply with the limits for e Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ere designed to provide reesoneble protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, mey cause harmful interference to radio communicetions. However, there is no guarentee that interference will not occur in a perticuler installation. If this equipment does cause hamfful interference to radio or television reception, which sen be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. tncreese the seperation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, Consult the dealer technician for help. or an experienced radio/TV
System Main unit Speakers

SC-PM19 SA-PM19 SB-PM19

SC-PM193 SA-PM193 SB-PM193
The model number and serial number of this produci can be found on either the back or the bottom of the unit, Please note them in the space provided below and keep for future reference. MODEL NUMBER SERIAL NUMBER User memo: DATE OF PURCHASE DEALER DEALER NAME ADDRESS
Any unauthorized changes or modifications to this equipment would void the users authority to operate this device. This device complies with Pert 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause hermful interference, and (2) this device must accept any interference received, including interference that may ceuse undesired operation.

TELEPHONENUMBER

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilaterel triangle, is intended to alert the user to the presence of uninsuleted "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- INVISIBLE L_ER FU,.DIATION I_1_B_ 0pEM - OSW, LIGLAgERST L_INGN_ BB_f,^ BELAR 0f"_1_D.

VJmNING

BE_TAU_N.

ADYAI_EL -_

GL_._ar_I_WDm_.
AvA_SSA OL_T,_:'#4A_NTA _ _ml_
tnside of product triangle is intended to alert the user to the presence of important operating and The exclamation point within an equilateral maintenance (servicing) instructions in tile literature accompanying the applienee,

RQT?364

_____________________________________________________________________________________________________

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR

iiii= i

PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. PERSONNEL. REFER SERVICING TO QUALIFIED
Please check and (dentify accessor(es.

the supplied

Use r_un_bers indicated (r_ parentheses wher_ ask(ng for rep(acemer_t parts. In U.S.A. to order accessories. refer to "Accessory Purchases" on page 27, AC powersuppty (K2CB2CB00006) cord.. 1 pc.
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT4N CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING. ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
FM (ndoor antenna.. 1 pc, (RSA0007-L)
[] AM loop antenna.. (N 1 DAAAA00001 ) 1 pc.
Remote control transmitter (EUR77t 1150)
Remote control batteries R6, AA, UM-3

2 pcs.

RQTP3_4
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below, Keep these operating instructions handy for future reference. 1) 2) 3) 4) 5) 6) 7) 8) Read theee instructions. Keepthese instructions.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/acceeeories manufacturer. specified by the
Heed all warnings. Follow all instructions, Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install accordance with tile manufaciurer's instructions. in
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet,

i i i i i i i i i i i ii i i i i i i ii i i i i
1. Damage requiring service--The unit should be serviced by qualified service personnel if: (a) The AC power supply cold of AC adaptor has beel_damaged; or (b) Objects of liquids have gotten into the unit; of (c) The unit has been exposed to rain; of (d) The unit does net operate normally of exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Sarvicing--Do not attempt to service the unit beyond that described in those operating inst[eetio_s, Refe[ all other servicing to authorized servicing perso_mel, 3. Replacement parts--When parts need replacing ensure the servicer uses parts specified by the manufacturer e[ parts that have the same cha[actedstics as the edgicel parts. Unauthorized substilutes may resull in fire, elecliis shock, or ether hazards. 4. Safety eheek--Afler rapai[s or service, ask the servicer to perform safety checks to confi[m thai the unit is in proper working conditio_.
Selecting fine audio equipment such as the unit youve just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion--and, most importantly, without affecting your sensitive hearing. We recommend excessive noise, that you avoid prolonged exposure to
For p[odect information or assistance with product operation: In the U.S.A., [efer to "Customer Services Directory" below, For assista_]ce in the centicenlal U,S,A. in obtaining repairs please ship the product to: Panasoeie Services Company- Customer Sarvieeeter Suite B 4900 George MeVay Drive MeAlien, TX 78503 In Puerto Rico contact the Pa_aseeic Sales Company. Tel. (787) 750-4300 Fax. (787) 768-2910 When shipping the unit carefully pack and send it p[epaid+ adequately insured a_d preferably in the original carton. Include a letter detailing the complainl a_d provide a day ti_:,_e phone nu_:,_ber where you can be reached. tF REPAIR tS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED 1"O FURNISH A SALES RECEIPTfPROOF OF PURCHASE INDICATING DATE OF PURCHASE. AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Also, the purchaser will be responsible for shipping the unit to the above address. In Cal_ada, contact the Panaseeic Canada inc. Customer Care _

i_iiiiiiiiiiiiiiiiii iiii ii ii iiiiii ii iiii ii ii ii ii ii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i iiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

the AM loop antenna.

Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords. Connect the speaker cords. O Confirm the colors of the tags on the ends of the cords. For White tags: Connect cords to gray terminals. For Blue, Black and Red tags: Connect cords so tag colors match the terminal colors. Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency. Incorrect connection can damage the unit. Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. ,_ (_ ix i i L Caution Use the speakers only with the recommended system, Failure to do so may lead to damage to the amplifier and/ or the speakers, and may result in the riskof firs, Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. Do not attach these speakers to wails or ceilings.
Connect the AC power supply cord.
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc.
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
An outdoor antenna should be instaed by a qualified technician only.
Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location. When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during a lightning storm.

5Xl i!

A_!eepal_en_a
[ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

(L"

iiiiiii

iiiiiiii

Make sure that the power supply for all components has been turned off before making any connections. For details, refer to the operating instructens of the unit which is to be connected. All peripheral components and cables sold separately.

=iiiiiiiii

This example shows how to connect an analog player with a PHONO QUT/LtNE OUT switch. When units other than those described are to be connected, please consult your audio dealer. Only an analeg playerw_ha bult-in phono egualizercan be connected. Set the switch to the "LINE OUT' position at the back of l_e ar_alog player.

Displaying the clock: Press [SHIFT] + [CLOCK/TIMER]. The clock is shown for about 5 seconds.
The clock may lose or gain some time over a period. Readjust if necessary.
Press [DIMMER]. The display brightness will be reduced indicator. To cancel, press [DIMMER] again.

except for [AC IN]

Press [MUTING]. To cancel, press [MUTING] again. Muting can also be cancelled by lowering the volume all the way to "--dB". When the system is turned off, the muting operation will be automatically cancelled.

Press [TUNER/BAND]

to select:

FM AM, 2

Press [PLAY _> MODE] to select "MANUAL". PRESET _ MANUAL, [VIREW/I<_I] or [.,VFF/=._-I] to select the
frequency of the required station, "ST" is displayed when a stereo FM broadcast received.

is being

Adjust

the volume,

Auto tuning Press and hold [V/REW/I.,qI_] or [/v'FF/I_*_4] for a moment. The unit begins auto tuning when the frequency starts changing rapidly and stopping when it finds a station. To cancel, press IV/REW/_,<_] or [/v'FF/I_*_4] again. Excessive interference may interrupt auto tuning.
Press and hold [PLAY MODE] to display "MONO'. To cancel, press and hold [PLAY MODE] again. MONO is also cancelled if the frequency is changed. For normal listening, turn off "MONO'.
Bv main unit only This system allows you to receive FM broadcasts allocated in 0.1 MHz steps. TO change the step to 0.1 MHz (_) P_ess and hold [TUNER/BAND] After a while the display flashes with the current minimum frequency. _) Continue to hold [TUNER/BAND] down. When the minimum frequency changes, release the button. To cancel, repeat the above steps.

_[A"zJ't_t

After changing the setting, previously preset frequency will be cleared. Sound is momentarily interrupted if you load/unload a cassette while listening to an AM broadcast. ,.J

_QTZ364

_________________________________________________________________________________________________

_______________________

iiiiiliiilililililiiililiiililiiiiilililililili ! !! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !iii iiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
There are two methods of pre-seli_g stations: Automatic presetting= Stations the tuner can receive are preset automatically. Manual presetting: You can select the stations to preset and the order they are preset in. Up to 15 stations can be preset for FM and AM bands, Press _UNER/BAND] to select "FM" or "AM'.

I To prevent damage

Always observe the following points. Set the system on a flat, level surface. Do not set it on top of magazines, inclined surfaces, etc. Do nor move the sysfem while tray is opening/closing, or when leaded. Always unload all CDs before n_oving the system. Do not put anything except a CD in the tray. Do not use cleaning CDs or CDs which are badly warped or cracked. Do not disconnect the AC power cord from the household AC outlet during CD changing operation.
iiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Preparation: Press [CD i_,/ll] and then [STOP II,-DEMO].
1 Press [_"co CHANGE],
2 (Within about 10 seconds) Press [CD 1] ~ [CD 5] and insert the CD on the
Press [--_ CD CHANGE] again to close,
Repeat steps 1 and 2 to insert up to 5 CDs.
I Listening to the CD placed in a speC#ic tray]
Press [CD 1] ~ [CD 5] to start play, The player stops after playing the lasttrack. Adjust the volume.
To remove the CD You can change the CDs in the other trays while one CD is playing (except in All-Disc Random play or program play). (_) Press [& CD CHANGE]. _) Press [CD 1] ,_ [CD 5],
Press [& CD CHANGE] again to close the tray,
Press [CD CHECK], The tray with a CD being played will not open. tf the player is stopped, all trays will open.
Press [CD CHECK] again to close the trays, Do not remove or insert CDs during a CD check. Do not pull out the trays during a CD check. 8 cm (33/20 CDs cannot be checked. ")
-4 You can mark one track each on the 5 discs loaded so that you can start play from them later. 1.,.)-page 19)

RQTF364

iiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Mode 1-DtSC ALL-DtSC 1-TRACK 1-RANDOM A-RANDOM
To play one selected disc. all loaded discs in succession from the selected disc to the final disc _. one selected track on the selected disc. one selected disc in random order, all loaded discs in random order.
Press [CD I_/11] and then [11 CLEAR]. Press [PLAY MODE] to select your desired mode. _> f-DISC _ ALL-DiSCo 1-TRACK A-RANDOM _ 1-RANDOM

If A-RANDOM button. was selected in this step, press the play
Press [DISC] and (within 10 seconds) press [1][5] to select the disc. The CD starts if 1-DISC, ALL-DISC or 1-RANDOM was selected in step 2. When 1-TRACK is selected in step 2 Select the track with the numeric buttons to start play. Toselect track 10 or over, press [_10] then tile two digits. When 1-RANDOM or A-RANDOM is selected in step 2 Press [CD _/11] to play CD.
When playback ends The current play mode will be retained. Final disc For example, if play starts from disc 4, disc 3 will be tile "final disc _. Order of progression: Disc 4--5-- 1--2--3
You can use the CD Play Mode function together with repeat play. During 1-RANDOM play or A-RANDOM play, you cannot skip to tracks which have already been played. During 1-RANDOM play or A-RANDOM play, you can search forward or backward only within the current track.
Direct access allows you to start normal play from a specific track to the last track on the CD.

1 Press [DISC],

2 (Within 10 seconds or so) Press [1] ~ [5] to select the disc you want. Press the numeric button(s) to select and play your desired track number.
To select e two-digit track Press _10] and then the two numbers you want.
You cannot use direct access RANDOM mode. play with 1-RANDOM or A-
Press [REPEAT] before or during play, "REPEAT ON" and "[_" are displayed,
To cancel repeat play Press [REPEAT] once again. "REPEAT OFF" is displayed and '1_" is cleared. TO repeat your favorite tracks 1.Program the tracks you want (perform steps 1 _ 6 on page ts.) 2.Press [REPEAT] and make sure "REPEAT ON" and "[_" are displayed. &Press [CD _,.-/11]. layback will start. P TO use repeat play with CD Play Mode function Set the desired mode, press [REPEAT] before or during playback, and make sure "REPEAT ON' and '_ are displayed.
This function allows you to display the remaining the current track. During play or pause mode Press [DISPLAY] / to display: Remaining play time_ /

play time of

Elapsed play time _
When track number 25 or greater is playing, remaining time display shows" :-

RQTY364

This function allows you to progrem up to 24 tracks,
Press [CD I_/nn] and Press [PROGRAM]. Press [DISC], (within 10 seconds

then [11 CLEAR].

or so) the disc you want. button(s) to select the
Press [1] - [5] to select Press desired the numeric

track,

6 Repeat 3through steps 5toprogram tracks. other

[MARKER]

"STORING"

blinks on

the display. If you store a new track, the old track will be cleared.
I To recall a marked track number in the current disc During play or stop Press [MARKER] to recall a marker and start play.
"NO MARKER" indicates that the marker in the current disc is empty. The marker memory will be cleared when you open the OD tray. For CD-DA, you cannot use this function during 1-Disc Random play and All-Disc Random play, You cannot use this function during program mode.

During Press

play or pause [DISPLAY] to select your desired CD display.
When a title is longer than 9 characters, it will scroll across the display. "NO tD3 _ is displayed if titles with tD3 tags haven't been entered, Maximum number of displayable characters: Album/track title: 31 ID3 album/title/artist name: 30 (tD3 is a tag embedded in MP3 track to provide information about the track. Ths unt can dispayabum and trecktteswth D3tags version 1.0 and 1. t). Titles containing text data that the unit doesn't support cannot be d splayed.

_QTZ384

'opoftheenit _
Press [OPEN &] to insert a cassette, Close the lid by hand. Press [TAPE I_] to start playback. Repent step 1 and 2 to play the other side of the tape.
Adjust the volume. Action Press [STOP II, - DEMO]. Press [TAPE I_] when the system is OFF with the cassette loaded. Press [V/REW/_I] the stop mode. or [PJFF/I,.I,.I] in
stop tripe playback stnrt one touch piny fast-forward rewind and
Types of cassettes which cart be played correctly Only normal position tapes nre recommended. NORMAL POSITION/TYPE HIGH POSITION/TYPE METAL POSITION/TYPE tl tV I ,Z X X
Tapes exceeding 100 minutes are thin nnd can break or get caught in the mechnnism, Tape slnck can get cnught up in the mechanism and should be wound up before the tape is plnyed, Endless tapes can get caught up in the deck's moving parts if used incorrectly. To find (TPS: the beginning Tape Program of a program Sensor)
TPS finds the beginning of a track and resumes piny from there. Each press increases the number of tracks skipped, up to a maximum of 9.

Press [v/REW/I,,_]

or [.,%/FF/I_I] during play.
The TPS function searches for silent parts of about 4 seconds in length which are normally found between tunes. As n result, it may not function properly in the following crises: With short silent parts When noise occurs between tunes With silent parts found within tunes

_________________________________________________________________________________________________________

iiii!!

Only normal position tapes are recommended Removetabstopreventrecording.Torecord, covertabsasshown. Volume and sound quality during playback have no effect on recording.
(_ Press [TAPE _] and then [STOP I, -DEMOf (_) Insert the recorded cassette with the tape facing out. (_) Press [e/ll REC],
Wind up the leader tape to begin recording in,mediately. Preparation: Press [TAPE I_] and then [STOP I, -DEMO] to select tape as the source. Press [OPEN &], insert facing out. Close the lid by hand. s cassette with the tape
Preparation: Do the preparatorysteps as above. 1 Tune to the required station. (._ page 9) 2 Press [e/ll REC] to start recording.
To stop recording stop recording temporarily cut an unnecessary part while recording Action Press [STOP m, -DEMO]. Press [O/11 REC]. Press [O/11 REC] again to resume recording. Press [O/11 REC] during the unnecessary part. Press [O/11 REC] again to resume recording. Turn the tape ever and press [t/11 REC],
record on the other side of the tape

RQTP384

Mode f-DISC ALL-DISC f-TRACK f-ALBUM (MP3) f-RANDOM A-RANDOM
To record one selected disc, record all loaded discs in succession from the selected disc to the final disc. record one selected track or_ the selected disc, record one selected album on the disc, record the disc ir_random order. record all leaded discs in random order.
1 Press [CD i_/11] and then [STOP hi, -DEMO]. 2 Press [PLAY ODE] M toselect desired your mode,
For I-TRACK mode or [A/FF/I_,_I] to select the track. Press [v/REW/_,,,_]
For 1*ALBUM mode (MP3) Press [ALBUM (_. or._)] to select the album. For I_DISC/1-RANDOM DO steps 1 to3on page 13, Ensure CD is stopped. mode
[I/UU REC] to start recording. Action Press [STOP II, -DEMO]. Press [O/11 REC]. If the tape fir_ishes before the CD, press [STOP m, -DEMO] to stop the CD. Press [O/11 REC] to resume recording.
stop recording stop recording temporarily
This function allows you to record up 1o 24 programmed

tracks,

Programme the track(s) you want. ('_ steps I - 6 on page 15) Press [o/uu REC] to start recording.
To save power the ur_itturns off if it is left ur_used for 10 minutes This func_ior_works orgy if CD or tape is selected as the source, This fur_ctior_ does r_ot work if the source is turner or AUX.

Press [SHIFT] [AUTO OFF]. "AUTO OFF" is shown on the display,
To cancel Press [SHIFT[ + [AUTO OFF] again to clear "AUTO OFF' from the display. For your reference The settir_g is mair_tained even if the ur_it is turned off Wher_ the unit is turned on again, "AUTO OFF is displayed arid the unit fur_ctions as described above. "AUTO OFF disappears from the display if either turner or AUX is selected as the source but continues to fu_ctio_ normally.

p,4_,41

RQT73_4
The timer can be set as an alarm or radio recorder. Play timer and record timer cannot be used together. Preparations: Turn the unit on and set the clock (,,_ page 8). Timer Play timer Record timer Action Prepare the music source you want to listen to; tape, CD, radio or au, and set the volume. Check the cassette's erasure prevention tabs (,,_ page 21), insert the cassette and tune to the radio station (,,,_ page 10) or select the aux source (,,_ page 25). to select:
Press [SHIFT] + [CLOCK'TIMER] Every time you press the button: _> CLOCK _D PLAY _ _DREC, Original display
Timer CLOCK _) PLAY _) REC Original display
To set the clock. set the play timer. set the record timer. resume edginal display.

I Setting

the start and iinish
(Within 3 seconds) 2 1_) Press [V/REW!I<_I] or [^/FF/_.I_-I] to select the starting time. (_) Press [SHIFT] [CLOCK/TIMER]. (_) Press [',//REW/I<_I] or [A/FF/_.I_-I] to select the finishing time, (_) Press [SHIFT] [CLOCK/TIMER].
Press [SHIFr] [_)PLAY/REC] to select: Every time you press the button:
_> PLAY_@REC _ To turn on the play timer. turn on the record timer. turn off. NO display (off)_
Timer PLAY _) REC No display
(The indicator doesn't appear if the start and finish times or the clock haven t been set.) 5 Press [_] to turn off the unit and timer Action Play will start in the set condition at the set time with volume increasing gradually to the set level. The unit comes on 30 seconds before the set time with the volume muted. will start.

Timer Play timer

Record timer

on next page) RQT73_4

Sound is unfixed, reversed or comes from one speaker only.
Check the speaker connections.

"ERROR"

is displayed.
Incorrect operation performed.
Read the instructions and try again.
"F61"is Listecir

displayed. to the radio

Check and correci the speaker cord connections. 0 If this does not fix the problem, there is a power supply problem. Consult the dealer.
When there is a television
set nearby The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna. O The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
The picture on the TV disappears or stripes appear on the screen.
Using the cassette deck I Recording is not possible. Playing discs I tape. erasure I If the prevention tabs have been removed, cover the holes with adhesive
The total number of tracks displayed differs each time the same disc is inserted. Unusual sound is heard.
The disc may be scratched, or its data may be defective.

Replace the disc.

The remote control Remote control doesn't work. Check that the batteries are inse_ted correctly. Replace the batteries if they are worn.
Panasonic Consumer Electronics Company, Division of Mstsushita Electric Corporation of America One Pa_aso_ic Way Secaucus, New Jersey 07094
Panasoctc Sales Company, Division of Mstsushlta Electric Of Puerto Rico, Inc. Ave. e]5 de Infanlerla, Kin. 9.5 San Gabriel hduslrial Park, Carotna, Puerto Rico 00985
Panasonic Audio Products Limited Warranty
Limited Warranty Coverage Carry-In or Mail-In Service, if your product does not work ptolemy baca_ se o_ a dsfec: in matshels or workm_/$hil% P_U_,3,_x_IC Cons_;mer Electto_ics Company or Pana_o_ic S,31es Coml_acy (colle_ively rsf_rree; _ as"the war, arrive') wtL for _e length of the period irfJicaisd on tl_e ctsat belo_ wDich stods wi_ the hers of ori_ical p_hase (_war_u_iy _riod"), at iis option at*her (a) repair yo_ produ_ with new or re_rbisl_ed I_ahe_or/b) replace it _th a new or _t refurbished pr0du_ T_e de_sicn to _p_r or re,ace will t_e m_de by t_e w_t_o_ 7or Cacn/-In or Mall-in Service in the Linited States cail -tt00-211-PANA ( -tttt0211-72_2 i or visit P_asonic web sits: htt!3Jiwww tt,3n_sonic co m _or assistsnce in Puerto _ico call P_u_asonic Sales Comp_u_y (787i-750-4tttt0 or _ax (787)-768-21tt Limited Warranty Limits And Exclusions "_his w_rarty O N _'-YCOVERS failures due to de_s

in m_eriais

or workmanship_ T_ne wa_an_
ane; DOES NOT COVER normal wea_ ane; tear or cosmeiic

homage

Product or Part Name A_dio_roduots (except itemslistse; _elow) All_dio Racks/_binats)
Parts _e (1) year Thirty(30) days Tl_ree(3) years
Labor One/1 ) yea_ Not Applicable Three (3) yo_
ALSO DOES NOT COVEI_ d_ages wDich occdrred in sDi_mer4_ or _at_es wl_ich a_ caused by p_odu_s not spp_iee; by the w_rarIor_ or _=atu_s '_ich rose,It f_om acd_erIs, mal_se_ abuse_ r_ettieot, michane;in_ mispppiicaton, alteration, fa_ity hslallaIon, sat_Jtt _strte_ misadiustmeat at or_s_mer conttoi& i mpfope_ maint_nance_ pp_._er iir_e s_r_e_ Itt!lthil_g damatte_ modificaticn, or commercial L_se(sul_ as in a I_atel_ ottice_ resta_rant_ or other bualr_ess), _enlai use of the produ_ se_or ice ,_y _t/yor_e attler ihan _ Fa_ory Ser_icer_ier d_e th_ is _tribatable to acts of God THERE ARE NO EXPRESS WARRANI1ES or oilier Authorized Se_ice_ MITED
TechcicsStand Alone Shea_ers_ S_bwoo_r Speakers USB Reader-W_itsr, PersonalCompute_ C_e; A_aptsrs (in exl_an_efor deteoti_e iiem) Asces_ries: Headphenes_ Cartridges_ Micropl_ones.Adapters Recna_geabieSaleries_ DVD-t_/-RAM Disc_/in exch_ge _r defe_ive item) S_ Memory 0_rds_ RecDar_e_le Battery Packs/in ech_ge for _e_oti_e item)
_e ( 1 year ) Nineiy (90) heys Ten (10) heys
Not Applicable Nicety (0)days Not Applicable

EXCE_TAS

UNDER "LiMIT-
ED WARRANTY COVERAGE '+. THE WARRAI_rOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, O_ ARISING OUT OF ANY BREACH OF THIS WARRAN]_f. (As examtties_ this excludes dam_es for lost iime, t_avei to and _om the serviced,

Nineiy (90) heys

Not Applicable
loss of media or imattes_ dat_ or oilier memory cooteat The items ksted ire nat ex_Jual_e_ but a_e for llust_ation otis) ALL EXPRESS AND IMPLIED WARRAI_ TIES, INCLUDINO THE WAR_AHTY OF MERCHAHTABILITY_ ARE LtMrrED TO THE PERIOD OF TilE LIMITED WARRAN_. Some ststes do nat _fo# the exclusion Ol Im[t_on of [nddental or com_equsnal
Dud_ the %._oor" wa_raaty pe_od there will be r_ ch_tte for Mbo_. Durictt the "P_ats _ wac_rty heriod_ the_e will be no ctsl'tt e for p_ats You m_st cazry-ir_ or mailin your pr_du_ du_icg the w_ranty !3erioe; If _on-rech_tteabie hetteries a_ in_Juded, they are not wanantse; This w_ranty only _3plies _ atoe;_cts I_U_akased aPJ serviced in the LJaked States o_ Puerto Rico This wananty is extended o_ly to the orittinal pu_tlaser at a ne_._produ_ )3_h_se which was r_ot sold "as is". A pu_hase date is required for wit ranty so.ice. receipt or Other atoo_ of I_le original

damages, or Imlatro_s o_ how Io_ a_ impted wst_l,3 lasts, so th8 excl_alons may _ty no_ ppply to YOLk. This waxranty ttives yo_ specific legai ritthts a_d you may also have other ritthis whic_ va_ _Om Stats to state, if a problem with this produot _evelotts du_n_ or after tl_e waq_a_iy pe_od, yoL_ may cot fia_t youF dealer or Servicenle_ It the _3_oblem is nat bane;led Io your s_isfootion_ i_en writs Io the war_a_ior's Consumer Affairs Dppartmer4 _ the ad@esses listed for the wa_nto_ BY THIS LIMITED WAR-
PARTS AND SE;IVICE WHICH ARE NOT COVERED RANTY ARE YOUR RESPONSIBILITY.
or, contact us via the web at:

purchase Parts and

Obtain Product Intormstion and Operating Assistance; locate your nearest Dealer or Servlcester; Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
htto ://www.Danasonic.com/suooort htto://www.Danasonic.com/contactinfo
YOU may also contact us directly at: 1-SO0-211-PANA (7282), Monday-Friday 9 am-9 pro; Saturday-Sunday For hearing or speech

10 am-7 pm_ EST.

impaired TrY users, TTY: 1-877-833-8885

Purchase htto

Parts, Accessories

and Instruction

Books online for all Panasonlc
Products by visiting our Web Site at:
://www.Dasc=Danasonic.com
or, send your request by E-real to: IIDCD_rts(_DBIIBSORiC=COM YOU may also contact us directly at: 1-900-332-8368 (Phone) 1-#,00-237-9090 (Fax Only) (Monday-Friday 9 am to 8 pro, EST.) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks) For hearing or speech impaired TrY users, TTY: 1-866-805-1277
Matsushita Efectrie Of Puerto RICO, Inc. PanasoMc Sales Company/Factory Servtcenter: Ave. 65 de Infanterta, Kin. 9.5, San Gabrief industrial Park, Carolina, Puerto Rtco 00985 Phone (787)750-4300, Fax (787)788-2910

P3",_

RQTP314

iiiiii

AMPLIFIER SECTION Power output 10% Total harmonic distortion 60 Hz-3 kHz, both channels driven (Low channel) 3kHz-16kHz, I1_ 26W per channel (6_J) per channel (6_.)) [SC-PM193125W both channels driven _ Digital filter DiA converter 8fs MASH (1 bit DAC) 32kbps-320kbps 32kHz, 44.1kHz, 46kHz 2 way, 2 speaker system 10cm (4") cone type 6cm (23/_ cone type ")
MP3 Bit rate Sampling frequency

SPEAKER

SECTION

(High channel)

29W per channel (6_J) per channel (6_.)) 55 W per channel

 

Tags

TX-P37x10E Server Continental 1996 AZ3068-37B GFA-555II - ET OT-E260 1 03 Es-E28 Nokia 2110 MP3-3080R E3500 Loola UP FC6843 02 T710SH SA-AK240 Eton E100 A8R-MVP SDM-090P Reader TC-520 Solo 2100 Citiz CO ER-121 Cs3 DVD-R149 Review T803V CLD-S370 PT-LB78VU Camileo P10 SR-L3616B WF7602SUV Restoreit 7 ICD-UX300F 2693HM MV422 CFD-S32 EL-2135 Pocket PC Valour HT-TX35T DP-01CD E-420 SLV5400 Deskjet 640C 1402vlzpro Futura ICD-MS2 HK6500 Laguna CD36 SP DIR CT-3271SB Awyaznh AV-29FT1sug-av-29ft1 MZ-E30 AG-7350 LA32S71B Confidence 7470 System KX-TCM420B DB238R LS1902T 9HP-2003 Roland D110 Aculaser 2600 KD-491F DVX298H 42PC5D-UL Black DCT6208 ROC 6407 Digital SE 12 M 304 Grandma TS0GSJ25P Annihilation RC-591 YZF-R6-2002 RP300A Sedan COP 2 Player Tsl 122 TC-TX333 PR-DLS533 POD Plus Panel Fishfinder 140 CUC 7301 TO GO Z-560 PW50-2003 795FT-FB795e-ep- XD-J120 Asus P4BM U2-X1130 Combo MX882 Chamaleon

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101