earthing connection.

If you find any abnormality, remove the mains plug immediately!

AC 220-240 V 50 / 60 Hz

Power source

50 / 60 Hz AC.

This TV is designed to operate on 220-240 V,
Do not place foreign objects inside the TV
Do not remove covers NEVER modify the TV yourself
Do not allow any objects to drop into the TV through
the air vents (fire or electrical shock may result).
(High-voltage components may cause serious electrical shock.) Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. Have the TV checked, adjusted, or repaired at your local Panasonic dealer.
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Do not expose to rain or excessive moisture
Use only the dedicated pedestals / mounting equipment
Using an unapproved pedestal or other fixtures may
make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use approved pedestals / mounts (p. 6).
To prevent damage which might result in electric
shock or fire, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fire never place any type of candle or naked flame on top or near the TV.
Do not allow children to handle SD Card
As with a small object, SD Card can be swallowed
by young children. Please remove SD Card immediately after use.
When cleaning the TV, remove the mains plug Do not block the rear air vents Cleaning an energized TV may cause electrical shock. Blocked ventilation by newspapers, When the TV is not going to be used for a long table cloths, curtains, etc. may cause overheating, fire or electrical shock. period of time, remove the mains plug Do not expose your ears to This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet. excessive volume from the headphones Transport only in upright position Transporting the TV with its display panel facing upright or Irreversible damage can be caused. downward may cause damage to the internal circuitry. The TV is heavy. Handle the TV Allow sufficient space around the TV for by 2 or more people. Support

Minimum distance

Caution

radiated heat

When using the pedestal, keep
as shown to avoid injury by the TV tipping or falling.
the space between the bottom of the TV and the surface where the TV is set. In case of using Wall-hanging bracket, follow the manual of it.
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (image retention). This is not considered a malfunction and is not covered by the warranty. Typical still images Channel number and other logos Image displayed in 4:3 mode Video game Computer image To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed.
Auto power standby function
If no signal is received and no operation
Keep the TV away from these

Electronic equipment

types of equipment
is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode.
In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound). Equipment with an infrared sensor This TV also emits infrared rays (this may affect operation of other equipment).
Notes / Maintenance Safety Precautions

Maintenance

First, remove the mains plug from the socket outlet.

Display panel

Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Do not tap or scratch the surface with your fingernail or other hard object. Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may
degrade surface quality).

Cabinet, Pedestal

Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Take care not to subject the TVs surfaces to detergent (a liquid inside the TV could lead to product failure). Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.

deteriorate the surface by peeling the paint).

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)

Accessories / Options

Remote Control

Standard accessories

Check that you have the accessories and items shown

N2QAYB000328

INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT

Batteries for the

R6 (UM3)

Remote Control (2)

Mains Lead

OPTION

RETURN

TEXT STTL INDEX HOLD

PROGRAMME
Operating Instructions Pan European Guarantee Card

Cleaning cloth

TX-P37C10Y TX-P42C10Y TX-P50C10Y

Pedestal

This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.

Optional accessories

Wall-hanging bracket

TY-WK4P1RW

In order to maintain the units performance and safety, be
absolutely sure to ask your dealer or a licenced contractor to secure the wall-hanging brackets. Carefully read the instructions accompanying the pedestal, and be absolutely sure to take steps to prevent the TV from tipping over. Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage. Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket. To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
Installing / removing remotes batteries

Pull open

Note the correct polarity (+ or -)
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. Do not mix old and new batteries. Do not mix different battery types (such as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries. Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

Attaching the pedestal

Do not disassemble or modify the pedestal. Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use any other TV and displays. Otherwise the TV may fall over and become damaged, and personal injury may result. Do not use the pedestal if it becomes warped or physically damaged. If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer immediately. During set-up, make sure that all screws are securely tightened. If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result. Ensure that the TV does not fall over. If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result. Two or more people are required to install and remove the TV. If two or more people are not present, the TV may be dropped, and personal injury may result.

XYN5+F18FN

Assembly screw (4) (silver)

THEL061N

Assembly screw (4) (black)
TX-P37C10Y, TX-P42C10Y, TX-P37C10YS, TX-P42C10YS THEL060N (TX-P50C10Y)

R :TBLA3685 L :TBLA3686

Pole (2)

TBLX0096

TX-P37C10Y, TX-P42C10Y, TX-P37C10YS, TX-P42C10YS R :TBLA3679 L :TBLA3680 (TX-P50C10Y)

TBLX0127 TBLX0089

( TX-P37C10Y ) TX-P42C10Y ( TX-P37C10YS) TX-P42C10YS

(TX-P50C10Y)

Assembling the pedestal
Use the four assembly screws to fasten the left and right poles to the base securely. Make sure that the screws are securely tightened. Forcing the assembly screws the wrong way will strip the threads. L or R mark is stamped on the bottom of the pole.

Securing the TV

Use the assembly screws to fasten securely. Make sure that the screws are securely tightened. Carry out the work on a horizontal and level surface.
Arrow mark View from the bottom
Hole for pedestal installation

Identifying Controls

TX-P37C10Y TX-P37C10YS
TX-P42C10Y TX-P42C10YS TX-P50C10Y

Function select

SD Card slot

SD CARD

Common Interface
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup

CI slot

AV3 S-V V L R

AV3 terminals

S-V V L R
Increases or decreases the channel position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On. Changes the input mode Remote control signal receiver

Headphones jack

Do not place any objects between the TV remote control
signal receiver and remote control.

Recording LED

Standby for Direct TV Recording: orange Switch On to turn on the TV or turn the TV
to standby mode by the remote control
Mains power On / Off switch

Power LED

On: green
Standby: red When using the remote control,
indicates the TV has received a command.

Remote Control

VIERA IMAGE VIEWER Standby On / Off switch Aspect
Switches to SD Card viewing mode Switches TV On or Off standby Changes aspect ratio from Aspect Selection list Also possible by pressing this button

AC 220-240 V 50 / 60 Hz RF cable Mains lead (supplied)

HDMI1 HDMI2

Mains lead (supplied)

DIGITAL AUDIO OUT

RGB VIDEO

RGB VIDEO S VIDEO

COMPONENT

AUDIO AUDIO OUT IN Y

L R L R PB PR
RF cable Fully wired SCART cable

RF OUT

DVD Recorder or VCR

RF cable

Connect to the TVs AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link. For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable. Read the manual of the equipment too.
Example 3 Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box

Rear of the TV

Terrestrial aerial Push until both side tabs click AC 220-240 V 50 / 60 Hz
Make sure that the mains lead is securely fixed.

To remove from the TV:

Press both tabs and pull on mains connector to release
Mains lead (supplied) Fully wired HDMI compliant cable

Fully wired SCART cable

Set top box

Auto Setup

Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before
starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)

Select the language

Mensprache
Deutsch English Franais Italiano Espaol Portugus Nederlands Dansk Svenska Norsk Suomi Trke Polski etina Magyar Slovenina Romn Srpski Hrvatski Slovenina Latvieu eesti keel Lietuvi

select set

Select your country

Country

Germany Austria France Italy Spain Portugal Switzerland Malta Andorra Denmark Sweden Norway Finland Luxembourg Belgium Netherlands Turkey Greece Poland Czech Hungary Slovakia Slovenia Estonia Lithuania E.Eu

Auto Setup starts

Auto Setup will start to search for TV
channels and store them. The sorted channel order depends upon the TV signal, the broadcasting system and reception conditions.

Sending Preset Data

If Q-Link, VIERA Link or similar technology
Please wait! 0% Remote control unavailable
compatible recorder is connected, channel, language, country / region settings are automatically downloaded to the recorder. If downloading has failed, you can download later by the menu item. Download (p. 18)

Select Home

Please select your viewing environment. Home Shop
Auto Setup is now complete and your TV is ready for viewing.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu. How to use remote control
Move the cursor / select the menu item Access the menu / store settings after adjustments have been made or options have been set

MENU RETURN

Move the cursor / adjust levels / select from a range of options Return to the previous menu Exit the menu system and return to the normal viewing screen

Open the main menu

ON SCREEN HELP Instructions box - Operation guide

(example: Sound Menu)

Sound Menu 1/2
Mode Bass Treble Balance Headphone Volume Surround Volume Correction Speaker Distance to Wall MPX
Select EXIT Change RETURN
Music Off 0 Over 30cm Stereo

Page up Page down

Operation guide will help you.
If tuning has failed Auto Setup (p. 18 and p. 19) To initialize all settings Shipping Condition (p. 19) If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
Auto Setup varies depending on the country you select
Favourite Network Selection

(if you select Sweden)

Network Name

Region Selection

Helsinki Turku Eurajoki Tampere Lahti Anjalankoski Lapua Jyvskyl Mikkeli Kuopio Koli Oulu Rovaniemi

(if you select Finland)

Search Mode

Search Mode All Channels

(if you select Finland) Sweden or

Free Channels

Please wait for 15 seconds.

select mode set

set select network

select region set

Analogue Auto Setup

DVB-T Auto Setup

if you select a country except Portugal, Poland, Hungary and E.Eu
DVB-T Scan CH 5 Analogue Scan CH 2 This will take about 6 minutes. CH Channel Name 62 CBBC Channel 62 BBC Radio Wales 62 ECartoon Nwk 99 CC 21 Type Free TV Free TV Free TV Free TV Quality 10 10

DVB-C Auto Setup

Progress 0% Type Free TV Free TV Free TV 100% Quality 10 This will take about 3 minutes. No. Channel Name 1 CBBC Channel 2 BBC Radio Wales 3 E4
Auto Setup - DVB-T and Analogue
DVB-T Scan CH 5 Analogue Scan CH 2 This will take about 6 minutes. CH Channel Name 62 CBBC Channel 62 BBC Radio Wales 62 ECartoon Nwk BBC1 Free TV: 4 Pay TV: 0 Radio: 0 Searching 99 CC 41
Type Quality Free TV 10 Free TV 10 Free TV 10 Free TV 10 Analogue Analogue Data: 0 Analogue: 2

Free TV: 4

Pay TV: 0

Radio: 0 Searching

Data: 0

Analogue: 0

Free TV: 3
If you select Shop by mistake
Return to viewing environment selection by pressing the RETURN button.

Automatic Demo Off

Auto Setup is complete
If you set to Off or On in this menu the
TV will be in Shop viewing environment. To return to Home viewing environment initialise all settings by accessing Shipping Condition. Shipping Condition (p. 19)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
Display the menu Displays the functions that can be set MENU
(varies according to the input signal)

Select the menu

Picture Sound Setup

access

select

(example: Picture Menu)

Select the item

Picture Menu 1/2

Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management x.v.Colour

Dynamic 0 Warm Off Auto

PROGRAMME REC

Adjust or select

change store or access (Required by some functions)

To return to TV

at any time

Choose from among

alternatives

Colour Balance

To reset the settings
To reset the picture settings only
Number and positions of alternatives

Normal

To return to the

previous screen

Sharpness

Changed

Adjust using the slide bar

To change

Go to the next screen

Child Lock Access

Reset to Defaults in the Picture Menu (p. 16) To reset the sound settings only Reset to Defaults in the Sound Menu (p. 17) To reset the picture and sound settings together N Also volume level and aspect mode are reset To initialize all settings Shipping Condition in the Setup Menu (p. 19)

menu pages

Displays the next screen
Enter characters by free input menu

User input

You can enter names or numbers freely for some items.
A U a u B V b v C W c w D X d x E F G Y Z e f g y z ( H I J K L M N O P Q R S T ! : # h i j k l m n o p q r s t ) + -. * _
Set characters one by one

Store RETURN

You can set characters by using numeric buttons.

Overview

How to operate

Picture Menu

P-NR 3D-COMB 3D-COMB Reset to Defaults

Off Off Reset

(p. 16)

Link Settings

Sound Menu
VIERA Link Q-Link AV2 out Power on Link Power off Link Standby Power Save Intelligent Auto Standby Download
On AV2 TV On On On On (No reminder) Access

(p. 18)

DVB-C Tuning Menu
SPDIF Selection MPEG Optical Level HDMI1 Input Reset to Defaults

Auto 0dB Digital Reset

Favourites Edit Channel List Auto Setup Manual Tuning Update Channel List New Channel Message Signal Condition Add DVB-T HD Channels
Access Access Access Access Access On Access Access

(p. 17)

DVB-T Tuning Menu
Favourites Edit Channel List Auto Setup Manual Tuning Update Channel List Favourite Network New Channel Message Signal Condition Add HD Channels Add DVB-C Channels Access Access Access Access Access Access On Access Access Access

Setup Menu

Off Timer Link Settings Child Lock DVB-C Tuning Menu DVB-T Tuning Menu Analogue Tuning Menu Language Display Settings Common Interface System Menu Other Settings
Off Access Access Access Access Access Access Access Access Access Access

Analogue Tuning Menu

(p. 18 and p. 19)
Channel List Auto Setup Manual Tuning Add DVB-T Channels
Access Access Access Access

(p. 19)

Display Settings
Preferred Subtitle Type Teletext Teletext Character Set Side Panel Input Labels Banner Display Timeout Playing Time Display
Standard TOP West Off Access 3 seconds On

System Menu

Shipping Condition System Update Software Licence System Information

Other Settings

Only available items can be selected.
AV Colour System Guide Plus+ Settings Power Save Picture Overscan Time Zone Refresh Rate
Auto Access Off On Auto 100Hz

Menu list

Menu Item Adjustments / Configurations (alternatives)
Basic picture mode (Dynamic / Normal / Cinema / Game) Set for each input signal Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room Normal : Recommended for viewing under normal ambient room lighting conditions Cinema : For watching movies in a darkened room producing a cinema-like picture Game : Fast response signal specifically to provide suitable images for playing games Not valid on TV mode A continuous record of time spent using Game mode can be displayed in the top right of the screen. Playing Time Display (p. 19)

Viewing Mode

Contrast, Brightness, Colour, Sharpness
Increases or decreases the levels of these options according to your personal preference
With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste For NTSC signal reception only
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)

Picture

Colour Management
Automatically adjusts colours to vivid ones (Off / On)

x.v.Colour

Increases the colour gradations (Off / Auto) This is effective when watching HD moving pictures from an external equipment. HDMI input mode only
Picture Noise Reduction Automatically reduces unwanted picture noise and flicker noise in the contoured parts of a picture (Off / Min / Mid / Max)

3D-COMB

Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen Set to On to display sharper and more accurate colours (Off / On) For PAL or NTSC signal reception only Not valid on RGB, S-Video, Component, HDMI and SD Card

Reset to Defaults

Press the OK button to reset the present Picture Viewing Mode to the default settings

Mode Bass Treble Balance

Adjustments / Configurations (alternatives)
Basic sound mode (Music / Speech)
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts volume level of right and left speakers

Headphone Volume

Adjusts the volume of the headphones
Surround sound settings (Off / V-Audio) Provides a dynamic enhancer of width to simulate improved spatial effects Switching is also possible by the Surround button on the remote control (p. 9).

Volume Correction

Adjusts the volume of individual channel or input mode

Speaker Distance to Wall

Adjusts the low frequency sound (Over 30cm / Up to 30cm) If the back space between the TV and wall is over 30 cm, Over 30cm is recommended. If the back space between the TV and wall is within 30 cm, Up to 30cm is recommended.
A different menu will be displayed while SD Card is used. Only available items can be selected.
Select stereo / monaural (Mono / Stereo) Normally: Stereo Stereo signal cannot be received: Mono M1 / M2: Available while mono signal is transmitted Analogue mode only

SPDIF Selection

Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal (Auto / PCM) Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream. HE-AAC (48 kHz) is output as DTS. MPEG is output as PCM. PCM : Digital output signal is fixed to PCM. DVB mode only

MPEG Optical Level

Normally, MPEG sound is larger comparing with the other types of audio track You can adjust the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB) DVB mode only

HDMI1 Input

Select to fit the input signal (Digital / Analogue) Digital : HDMI cable connection Analogue : HDMI-DVI adapter cable connection HDMI input mode only HDMI2 terminal is for digital signal only No setting for HDMI2 available
Press the OK button to reset the present Sound Mode to the default settings
Off Timer VIERA Link Q-Link
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Sets to use VIERA Link functions (Off / On) Selects which AV terminal is to be used for data communication between this TV and a compatible recorder (AV1 / AV2) Select the connected terminal to the recorder even it is not compatible with Q-Link. Chooses the signal to be transmitted from the TV to Q-Link (TV / AV1 / AV2 / AV3 / Monitor) Monitor: Image displayed on screen Component and HDMI signals cannot be outputted. Sets to use Power on Link function (Off / On) Sets to use Power off Link function (Off / On) Controls the power consumption in Standby mode of the connected equipment to reduce the consumption (Off / On) This function is available when VIERA Link is set to On and Power off Link is set to On. Makes non-watched or non-used connected equipment go into Standby mode to reduce the power consumption (Off / On (With reminder) / On (No reminder)) This function is available when VIERA Link is set to On. Downloads channel, language, country / region settings to a Q-Link or VIERA Link compatible equipment connected to the TV DVB-C channel setting cannot be downloaded. Locks a channel / AV input to prevent access to it Creates list of favourite DVB-C channels Skips the unwanted DVB-C channels or edits DVB-C channels Automatically sets the DVB-C channels supplied Sets the DVB-C channels manually Updates DVB-C Channel List with keeping your settings Selects whether to give a notification message when a new DVB-C channel is found Checks the DVB-C signal condition Retunes all TV channels to add DVB-T HD channels All the previous tuning settings are erased. Use this function if DVB-T HD services start in your area. Creates list of favourite DVB-T channels Skips the unwanted DVB-T channels or edits DVB-T channels Automatically sets the DVB-T channels received in the area Sets the DVB-T channels manually Updates DVB-T Channel List with keeping your settings Selects your favourite network for each broadcasters Selects whether to give a notification message when a new DVB-T channel is found Checks the DVB-T signal condition Retunes all TV channels to add HD channels All the previous tuning settings are erased. Use this function if HD services start in your area. Retunes all TV channels to add DVB-C channels

System Menu Other Settings
Common Interface Shipping Condition System Update Software Licence System Information AV Colour System GUIDE Plus+ Settings Update Postcode
System Information Power Save

Picture Overscan

Time Zone Refresh Rate
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.
Power Source Power Consumption Power Consumption in Standby mode
TX-P37C10Y TX-P37C10YS AC 220-240 V, 50 / 60 Hz 230 W
TX-P42C10Y TX-P42C10YS 245 W
TX-P50C10Y 350 W 0.5 W (Without monitor out recording) 15 W (With monitor out recording)

0.7 W (Without monitor out recording) 15 W (With monitor out recording)
This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020.

Customers Record

The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number
Web Site : http://www.panasonic.net
Panasonic Corporation 2009 Printed in Czech Republic