UF150 THRU UF1510
ULTRAFAST SWITCHING RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes
FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound l l l l Void-free Plastic in DO-15 package 1.5 ampere operation at TA=55 J with no thermal runaway Exceeds environmental standards of MIL-S-19500/228 Ultra fast switching for high efficiency DO-15
MECHANICAL DATA Case: Molded plastic, DO-15 Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Band denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. UF150 UF151 Peak Reverse Voltage, Pepetitive ; VRM Maximum RMS Voltage DC Blocking Voltage; VR Average Forward Current, Io @TA=55 J 3.8 lead length, 60Hz, resistive or inductive load Peak Forward Surge Current IFM (surge) 8.3msec. single half sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage VF @1.5A, 25 J 1.00 Maximum Reverse Current, @ Rated TJ=25 J Reverse Voltage TJ =100 J Typical Junction capacitance (Note 1) CJ Typical Junction Resistance (Note 2) R KJA Reverse Recovery Time IF=.5A, IR=1A, Irr=.25A Operating and Storage Temperature Range NOTES: 1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 2. Thermal resistance from junction to ambient and from junction to lead length 0.375(9.5mm) P.C.B. mounted UFUF1.UFUFUF1510 UNITS 1000 V 700 V 1000 V A A

1.10 10.50 -55 TO +150

V g A g A PF J /W ns J
RATING AND CHARACTERISTIC CURVES UF150 THRU UF1510

+0.5A 0 -0.25

NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms
SET TIME BASE FOR 50 ns/cm
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
10 UF150 TYPICAL 1 1.50 1.25 1.00.75 SINGLE PHASE.50 HALF WAVE 60Hz RESISSTIVE OR.25 INDUCTIVE LOAD.375" 9.5mm LEAD LENGTHS 100

IFM, Apk

UF1510 TJ = 25 J
0.01 0.2.4.6.8 1.0 1.2 1.4 1.6

FORWARD VOLTAGE-VFM(Vpk)

AMBIENT TEMPERATURE, J
Fig. 2-FORWARD CHARACTERISTICS
Fig. 3-FORWARD CURRENT DERATING CURVE
PEAK FORWARD SURGE CURRENT, AMPERES

CAPACITANCE, pF

TJ = 25 J 10

80 100

REVERSE VOLTAGE, VOLTS

NUMBER OF CYCLES AT 60Hz

Fig. 4-TYPICAL JUNCTION CAPACITANCE
Fig. 5-PEAK FORWARD SURGE CURRENT
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.