PRODUCT FEATURES

WJ-FS616 Duplex Multiplexer
PRODUCT FEATURES Camera control included for inputs 1-4, expandable to all 16 inputs (WV-PB6164 kit) Color compatible Permits multiplexed field recording of 16 cameras with a single VCR Full screen, 4, 7, 9, 10, 13 and 16 multiscreen monitoring modes Separate spot and multiscreen monitor outputs 720 x 486 pixel resolution Dynamic alarm recording automatically records an additional field of a camera in alarm Video loss detection on all channels Rack-mountableoccupies two (2) EIA rack height units Compatible with model WJ-DR200 digital video recorder 3716"H x 16916"W x 1334"D UL listed The WJ-FS616 is a duplex multiplexer with 16 channel inputs which boasts its high performance, system flexibility and multifunctionality. It has a compact design yet offers a high image quality of 720 x 486 pixels and reliable perfomance. The WJ-FS616 also offers multifunctionality such as 1, 4, 7, 9, 10, 13 and 16 multiscreen monitoring, high refresh rate for multiplex recording, remote control by PC, 16-channel alarm capability, video loss detector, and still and digital zoom. The WJ-FS616 is the key component for your effective surveillance system.
WJ-FS616 used in the Proteus System 400

Multiplexers

TECHNICAL SPECIFICATIONS

GENERAL SPECIFICATIONS

Frame Memory Internal Sync Acceptable Cameras Max. Number of Camera Inputs Input Signal Camera Input: Sampling frequency: 14.3MHz Quantizing bit: 8-bit 2:1 interlace Horizontal: 15.734kHz Vertical: 59.94Hz Any 2:1 interlace cameras 16 cameras
1Vp-p/75 ohm (BNC) x 16 with loopthrough outputs, automatic termination Playback Input: 1Vp-p/75 ohm (BNC) x 1 S-Video in x1 Genlock Input: VS 1Vp-p/75 ohm (BNC) x 1 with loopthrough output, automatic termination Spot Input: 1Vp-p/75 ohm (BNC) x 1 Alarm Input: 16 (D-Sub 37-pin connector) 1 (D-Sub 37-pin connector) Recover Input: Time Adjust Input: 1 (D-Sub 37-pin connector) Camera Switching Input: RCA pin jack x 1
Remote Control Input: RS-232C terminal D-Sub 37-pin connector Communication Port: 6-pin modular type x 1 with loopthrough output Output Signal Spot Output: 1Vp-p/75 ohm (BNC) x 1 Multiscreen Output: 1Vp-p/75 ohm (BNC) x 1, S-Video x 1 Recording Output: 1Vp-p/75 ohm (BNC) x 1, S-Video x 1 Sync Output: BBS output 0.45Vp-p/75 ohm (BNC) x1 Alarm Output: D-Sub 37-pin connector Reset Output: D-Sub 37-pin connector VTR Control Output: 2.5mm pin jack RS-485 Camera Control Output: Terminal x 1 Ambient Operating Temperature +14F ~ +122F (-10C ~ +50C) Power Supply 110240VAC, 60Hz Dimensions 3716"H x 16916"W x 1334"D (88 x 420 x 350mm) Weight Approximately 15.4 lbs. (7kg) STANDARD ACCESSORY Rack-mount bracket Weights and dimensions shown are approximate. Specifications subject to change without notice.

RECORDING MODES

Recording Mode Recording Time per Field (Sec) Recording Interval of the WJ-FS616 from ch 1 to ch 1 (Sec) 4 cameras 8 cameras 12 cameras 16 cameras 2H 1/60 0.08 0.15 0.24 0.32 6H 1/60 0.08 0.15 0.24 0.32 24H TL 0.20 0.93 1.86 2.79 3.72 24H Linear 0.20 0.93 1.86 2.79 3.72 24H Real Motion 0.03 0.20 0.40 0.60 0.80 48H 0.40 1.87 3.40 5.61 7.48 72H 0.60 2.80 5.20 8.40 11.20 84H 0.70 3.60 7.20 10.80 14.40 120H 1.00 5.10 10.20 15.30 20.40 180H 1.50 7.60 15.20 22.80 30.40 240H 2.00 10.10 20.20 30.30 40.40 480H 4.00 20.10 40.20 60.30 80.40
ARCHITECTS AND ENGINEERS BID SPECIFICATIONS
The duplex multiplexer with camera and VCR control functions shall be a Panasonic WJ-FS616 equal or better. The digital multiplexer shall permit multiplex recording of the images of 16 cameras with a single VCR, switching one to another field by field. The image of each camera shall be recorded with a minimum lapse, or can be played back in continuous moving pictures using a single VCR. The unit shall feature a built-in programmable switcher with dwell time and camera order programming. The unit shall automatically switch multiple camera images to enable sequential spot monitoring and simultaneous field recording. The unit shall feature separate spot and multiscreen monitor outputs. The unit shall offer full screen, 4, 7, 9, 10, 13 and 16 multiscreen monitoring modes with 720 x 486 pixel resolution and 8-bit digitizing. Manual spot selection shall also be available. When an alarm is triggered during time-lapse recording, the unit shall provide automatic field switching recording in the 2-hour/6-hour real time mode. The unit shall allow for the recorded images to be played back in full screen, 4, 9 or 16 multiscreen display mode. The multiplexer shall also feature multispot playback mode which combines all 3 primary multiplexer functions: playback, record and live multiscreen monitoring. In this mode, the unit shall feature playback from video tape recorder #1, displayed in the upper left corner display of 4, 7, 10 and 13 multiscreen modes. In addition, the duplex multiplexer shall feature live viewing of cameras on the remaining multiscreen views. In this mode, the unit may also be connected to a videotape recorder in record mode, featuring 3 multiplexer modes simultaneously. Freeze mode shall also be avaiable for VCR playback. The multiplexer shall include front panel or remotely-controlled VTR functions, including record, play, reverse play, rewind, forward, pause, stop and recording time mode. These functions shall also be controllable by using optional system controller, model WV-CU550A or WV-CU350. Up to four (4) multiplexers may be cascaded for a total system capacity of 64 camera inputs, four (4) multiscreen monitor outputs and 1 spot monitor output. The single spot monitor output shall display the video image from any of the 64 system cameras, via the optional system controller, model WV-CU550A or WV-CU350. The multiplexer shall provide access to all Panasonic camera control, set-up and alarm functions, including preset sort and sequence, Super Dynamic activation, digital motion detector mask set, electronic sensitivity up and back light compensation set-up. Controllable camera functions on Panasonics Unitized Surveillance Devices model WV-CS654 shall be accessible via front panel controls or the optional system controller, model WV-CU550A or WV-CU350. These functions shall include direct access of preset position, zoom (near/far), focus (near/far), iris (open/close) and pan (left/right). Camera functions and control shall be accessible for cameras 1-4 (included with base model). Camera set-up and control functions shall be accessible for cameras 5-8, 9-12, and 13-16 through the use of the optional control board kit (4 boards) model WV-PB6164. In addtion, cameras 1-4 (or those camera inputs equipped with the optional control board kit model WV-PB6164) shall feature cable compensation up to 3000' with no loss of video or control signal degradation when using RG59U cable, Belden 9259 or eqivalent. The multiplexer shall also provide 160 of a second refresh rate for 4 cameras at once (1260 sec. for 9 screens, 1660 sec. for 16 screens). 2X digital zoom and still features shall also be included with the multiplexer. The multiplexer shall feature dynamic alarm recording that will automatically record an additional field of a camera in alarm. The duplex multiplexer shall be able to be remotely controlled via the optional system controller, model WV-CU550A or WV-CU350, using 2 pair twisted and shielded cable. The unit shall provide digital display on the monitor and also recording of the following information: year, month, day, hour, minute and second, as well as alphanumeric camera location ID up to 8 characters. In addition to monitor display, the date and time shall be recorded on the tape. The multiplexer shall also feature video loss detection on all channels. The rear panel shall feature 16 video inputs, 16 alarm input connections, spot monitor output, multiscreen monitor output, RS-485 control connection, RS-232 interface connection, record output and playback video inputs, camera switching pulse input, alarm recover input and alarm output. The unit shall feature both video and S-Video (Y-C) inputs and outputs for recording purposes. The unit shall be rack-mountable and occupy two (2) EIA rack height units. The digital multiplexer shall not exceed 3716"H x 16916"W x 1334"D. Power source shall be 120VAC, 60Hz and it shall be UL listed.

Digital Video Duplex Multiplexer

WJ-FS616

THE DIGITAL VIDEO DUPLEX MULTIPLEXER WITH HIGH PERFORMANCE, SYSTEM FLEXIBILITY AND MULTI FUNCTION.
The WJ-FS616 is a duplex multiplexer with 16 channel inputs, which boasts its high performance, system flexibility and multifunction. The WJ-FS616 employs 4 separate digital process circuits which enables high picture quality pixel, high refresh rate, field switching recording and high reliability. The WJ-FS616 also offers multi functionality such as 4,7,9,10,13 & 16 multiscreen monitoring, versatile alarm capability and video loss detector etc. along with its system flexibility including camera control, VCR control and remote control capability etc. The WJ-FS616 is the key component for your effective surveillance system.
Single wire control or RS-485.

qVCR control

Panasonic time-lapse VCRs can be controlled by front panel of FS616 via RS232C or wired remote control terminal.
qRemote control by PC or WV-CU550A
The FS616 is able to be controlled by PC (with software) via RS232C or RS-485, or it can be controlled by WV-CU550A via RS485.

qSystem expansion

The FS616 can be expanded up to 64 input channel system using 4 units.

Multi function

qVersatile alarm capability
qAlarm indication mode (multiscreen monitor output) qAlarm link mode (multiscreen monitor output) qAlarm ignore mode (spot monitor output) qAlarm spot mode (spot monitor output) qAlarm priority recording and switching mode (recording output)
Key Features High performance

qHigh picture quality

pixel.
qMultiscreen monitor output
qSingle spot qMulti spot qSingle sequence qMulti-sequence
qField switching output for recording
Up to 16 multiplexed camera images.
qHigh refresh rate for multiscreen monitoring
1/50 for quad screen, 12/50 for 9 screen,16/50 for 16 screen.

System flexibility

qCamera control
Camera control such as PTZ, auto pan, focus, AF, iris, preset position and set up menu functions is available from the FS616 via
qSpot monitor output qQuad recording qElectronic 2x zoom and Still qVideo loss detector qSelectable REC OUT / Multiscreen monitor output 2

SYSTEM CONFIGURATION

Unit 1

WJ-FS616 Unit 4

RECORDING MODE OF PANASONIC TIME LAPSE VCR & CHANNEL UP DATE TIME
REC Mode REC Interval Channel update time (sec) 4 cameras 8 cameras 12 cameras 16 cameras 3H 0.02 0.09 0.17 0.25 0.32 12H 0.10 0.47 0.87 1.27 1.60 24H 0.18 0.84 1.56 2.28 2.88 48H 0.34 1.59 2.95 4.31 5.44 72H 0.50 2.33 4.33 6.33 8.00 84H 0.58 2.71 5.03 7.35 9.28 120H 0.82 3.83 7.11 10.39 13.12 170H 1.14 5.32 9.88 14.44 18.24 180H 1.22 5.69 10.57 15.45 19.52 240H 1.62 7.56 14.04 20.52 25.92 480H 3.22 15.03 27.91 40.79 51.52 960H 6.42 29.96 55.64 81.32 102.72

SPECIFICATIONS

Frame Memory Internal synchronization Acceptable Cameras Maximum Number of Camera Inputs Input Signal Sampling frequency: 13.5 MHz Quantizing bit: 8 bit 2:1 interlace Horizontal: 15.625 kHz Vertical: 50 Hz Any 2:1 interlace cameras. 16 cameras Camera input: 1 V [p-p] / 75 (BNC) 16 with loop-through outputs, automatic termination Playback input: 1 V [p-p] / 75 (BNC) 1 S-Video in 1 Genlock input: VS 1 V [p-p] / 75 (BNC) 1 with loop-through output, automatic termination Spot input: 1 V [p-p] / 75 (BNC) 1 Alarm input: 16 (DSUB 37 pin connector) Recover input: 1 (DSUB 37 pin connector) Time adjust input: 1 (DSUB 37 pin connector) Camera switching input: RCA pin jack 1 Remote control input: RS-232C terminal Communication Port: 6 pin modular type 1 with loop-through output Hard wire control: DSUB 37 pin connector Output Signal Spot output: 1 V [p-p] / 75 (BNC) 1 Multiscreen output: 1 V [p-p] / 75 (BNC) 1, S-Video 1 Recording output: 1 V [p-p] / 75 (BNC) 1, S-Video 1 Sync output: BBS output 0.45 V [p-p] / 75 (BNC) 1 Alarm output: DSUB 37 pin connector Reset output: DSUB 37 pin connector VTR control output: 2.5 mm pin jack/RS-232C RS485 camera control output: Terminal 1 Ambient Operating Temperature 10C - +50C Dimensions (WHD) 350 mm Weight 7 kg Power Supply 110 V - 240 V AC Standard Accessory Rack mount bracket

APPEARANCE

Unit : mm
qWeights and dimensions are approximate. qSpecifications are subject to change without notice. qThese products may be subject to export control regulations.

DISTRIBUTED BY:

Panasonic is the brandname of Matsushita Electric.
Printed in Japan [N-590A]