DATA MULTIPLEX UNIT

SERIES

4CH Data Multiplex Unit

WJ-MP204C

4 camera inputs

This equipment complies with the EMC Directive 89/336/EEC
Daisy Chain Connection (optional)
WV-CA48/10K (Cable Kit) WV-CA48/50 (Cable) WV-CA48/JN (Junction Unit)
EIA 19-type Rack Mounting Brackets (optional)

WV-Q204/1S

(for mounting one WJ-MP204C)

IMAGE CAPTURE

WV-Q204/2S
(for mounting two WJ-MP204C)

KEY FEATURES

SPECIFICATIONS

system

Power Source Power Consumption Video Input Spot Input VS/VD Input Video Output Spot Output VS/VD Output Data Communication Standard 220 V ~ 240 V AC, 50 Hz 7W 1 V [p-p] / 75 x V [p-p] / 75 x 1 VS (1 V [p-p] / 75 ), VD (4 V [p-p] / 75 ) x V [p-p] / 75 (Looped through) x V [p-p] / 75 x 1 (Changeable Output from video input, or Spot input) VS/VD IN (Looped through), or internal VD (4 V [p-p] / 75 ) x 1 Based on RS-485 (4-Line / 2-Line) Modular Jack x 1, or 5 pins terminator x 1 Alarm Input 4 (Changeable Alarm Output / Remote Input / Remote Output) Alarm Output 1 (O.C.[16 V, 100 mA]) Alarm Resume Input 1 Alarm Resume Output 1 (0/5 < O.C.[16 V, 100 mA]) > Spot Change Input 1 (No voltage contact) Alarm Change Output 1 (O.C.[16 V, 100 mA]) Unit Address 1 ~ 8 (Setting by Recover Switch) Operating for System Select the Camera, Alarm (Data/Display / Resume /Suspend), Setup,Camera, Lens, Housing, PAN / TILT, External device control Ambient Operating Temperature -10C ~ + 50C Ambient Operating Humidity Less than 90% Dimensions 210 (W) x 44 (H) x 350 (D) mm Weight 2.6 kg
Enables coaxial camera control in

( mode).

Coverts RS-485 camera control interface to coaxial control interface

(Camera RS-485 mode).

Enables a PC to control Panasonic coaxial control cameras via RS-485 PROCESSING

(software not included).

Enables system integrators to integrate Panasonic cameras with
other manufacturers System.
Up to four units can be connected in cascade enabling telemetry

system for 4-16 cameras.

4 camera inputs with Loop through, 1 spot output, 1 spot input. Flexible Terminal IF: 4 AL-IN", 4 individual AL-OUT, "4 camera
select inputs" or 4 tally outputs selectable by setup Menu and jumper connector on board. Other Terminal IF: Common alarm output, Alarm reset output, Alarm recover input, Spot SW input and Spot SW output. VS/VD INPUT, OUTPUT (Internal or loop through).

RECORDING/ARCHIVING

MAJOR OPERATING CONTROLS

Front View

Power Switch Unit Number Switch Alarm Reset Button Alarm Suspend/Set Button ESC/Setup Button Camera Selection Button Alarm Indicator Alarm Suspend Indicator

DIMENSIONS

Rear View

VIEWING

Camera Input Connectors 1-4 Camera Output Connectors 1-4 Video Input Connector Video Output Connector VS/VD Input Connector VS/VD Output Connector Alarm/Remote Connector RS-485 Terminal Data Port Dip Switch Signal Ground Terminal Power Cord

210 44

Unit: mm

Data Multiplex Unit

WJ-MP204
The Panasonic WJ-MP204 Data Multiplex Unit enables communicated with the optional WV-CU360 System Controller or the WJ-FS309/WJ-FS316 Video Multiplexers via Panasonic Security Data (PS. data) Link mode or camera communication mode, enables remote control of the cameras, confirm the alarm set, operating the cameras and control to the another device units.

Key Features

The WJ-MP204 Data Multiplex Unit enables the following key functions. Camera spot function
The picture appears on the monitor that is selected by the WJMP204 or the WV-CU360.
Select the channel of camera Alarm reset/Alarm suspend Setup communication and system mode
Remote control of the camera by Panasonic Security Data (P.S Data) Link mode with the System Controller WV-CU360.

Alarm function

Enables detect preset motion of the camera and when receive
the alarm, and it appears on the monitor. Alarm signal enable notice from alarm/remote connector to external devices. Alarm from multiplexed VS/VD signal. Alarm from external devices.
Remote control of camera settings. Remote control of Pan/Tilt Head and Camera Housing
(Wiper, Defroster, and etc.)
Remote control of motorized zoom lens: focus, zoom, iris and etc. Remote control of the Video Multiplexers WJ-FS309/WJ-FS316. Setup the WJ-MP204 Data Multiplex Unit and cameras.

SYSTEM EXAMPLES

MAJOR OPERATING CONTROLS

Color Monitor WV-CK2020

BASIC SYSTEM
WV-CP234 WV-CA4R5C3B WV-CS854 x 3

WV-7260D

WV-RC150
Front View 1. Power Switch 2. Unit Number Switch 3. Alarm Reset Button 4. Alarm Suspend/Set Button 5. ESC/Setup Button 6. Camera Selection Button 7. Alarm Indicator 8. Alarm Suspend Indicator Rear View 9. Camera Input Connectors 1-4 10. Camera Output Connectors 1-4 11. Video Input Connector 12. Video Output Connector 13. VS/VD Input Connector 14. VS/VD Output Connector 15. Alarm/Remote Connector 16. RS-485 Terminal 17. Data Port 18. Dip Switch 19. Signal Ground Terminal 20. Power Cord

System Controller

Panasonic Security Data Link
System Controller WV-CU360
VIDEO MULTIPLEXER WJ-FS316 SYSTEM
Camera (5) Camera (4) Camera (1)

Camera (6)

Camera (2)
Video Monitor Multi screen Video Monitor

APPEARANCE

Camera (7)

Camera (3)

Camera (8)

Camera (9)

8-1/4"(210)
CAMERA SELECT VTR STILL EL-ZOOM

Camera (16)

ALARM ALARM RESET
SPOT MULTISCREEN MULTI SCREEN SERECT

MENU CAM

Simplex

ON OFF

ESC Video Multiplexer WJ-FS
3/8" 1-3/4" (9.5) (44)

WJ-FS316

1-3/4"(44)

SPECIFICATIONS

Time Lapse VCR
Power Source Power Consumption Video Input Spot Input VS/VD Input Video Output Spot Output VS/VD Output Data Communication Standard 120 V AC, 60 Hz 7W 1V [p-p] / 75 x 4 1V [p-p] / 75 x 1 VS (1V [p-p] / 75),VD (4V [p-p] / 75) x 1 1V [p-p]/ 75 (Looped through) x 4 1V [p-p] / 75 x 1 (Changeable Output from video input, or Spot input) VS/VD IN (Looped through), or internal VD (4V [p-p] / 75) x 1 Based on RS485 (4-Line / 2-Line ) Modular Jack x 1, or 5 pins terminator x 1 Alarm Input 4 (Changeable Alarm Output / Remote Input / Remote Output) Alarm Output 1 (O.C.[16 V, 100 mA]) Alarm Resume Input 1 > Alarm Resume Output 1 (0/5 < O.C.[16 V, 100 mA]) Spot Change Input 1 (No voltage contact) Alarm Change Output 1 (O.C.[16 V, 100 mA]) Unit address 1-8 (Setting by Recover Switch) Operating for System Select the Camera, Alarm (Data/Display / Resume / Suspend), Setup, Camera, Lens, Housing, Pan / Tilt, External device control Ambient Operating Temperature 14F - 140F (-10C - + 50C) Ambient Operating Humidity Less than 90% 210 (W) x 44 (H) x 350 (D) mm [8-9/16" (W) x 1-3/4" (H) x 13-3/4" (D)] Dimensions Weight 2.6 kg (5.72 lbs.)

MATRIX SWITCHER WJ-SX350 SYSTEM

Color Monitor

SEQUENCE ALT BACK FWD SEQ PAUSE SEQ SHIFT CLOSE
CAMERA SITE CONTROL IRIS OPEN IRIS RESET UP AUTO FOCUS

Camera (32)

ACK/RESET
ALL RESET -1 CAM DEC RECALL +1 CAM INC

FUNCTION

AUTO PAN RANDM PAN

OFF NEAR

FOCUS FAR LEFT RIGHT
PRESET POSI AUX 1 WIPER ZOOM TELE WIDE

SET FWD CAM POSI

OPERATE BUSY
ESC CAM PROHIBITED STATUS MENU SET UP BACK HISTORY
DOWN AUX 2 DEF MATRIX SWITCHER WJ-SX

WJ-SX350

Optional 19" Mounting Brackets

WV-Q204/1

(for mounting one WJ-MP204)

WV-Q204/2

(for mounting two WJ-MP204)
Weights and dimensions are approximate. Specifications are subject to change without notice. These products may be subject to export control regulations.

DISTRIBUTED BY:

Panasonic Security & Digital Imaging Company A Division of Matsushita Electric Corporation of America Security Systems Group
Executive Office : One Panasonic Way 3E7, Secaucus, New Jersey 07094 Regional Office Northeast : One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Southern : 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838 Midwest : 1707 North Randall Road, Elgin, IL 60123 (847) 468-5211 Western : 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840 PANASONIC CANADA INC. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905) 624-5010 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina, P.R. 00985 (809) 750-4300
Printed in Japan [2P-469]

13-3/4"(350)

Unit: inches (mm)

Panasonic

Data Multiplex Unit WJ-MP204
The Panasonic WJ-MP204 Data Multiplex Unit enables to remote control multiple surveillance systems, such as operate of the up to four (4) camera functions, alarm setting and other system components with the optional Panasonic Video Multiplexers ; WJ-FS309 / FS316 by Panasonic Security Data (PS-DATA) link mode. Connecting up to four (4) WJ-MP204 Data Multiplex Units in daisy chain connection allows expansion of the systems to include up to 16 cameras. The Panasonic WJ-MP204 Multiplex Unit provides a cost-effective, high solution for your surveillance application. Key Features (1) Basic function ! ! ! ! Four (4) camera inputs and selection. Operate the camera function and setup. Alarm resetting and suspension. Built-in two(2) way data communication modes for suite the system application ; Panasonic Security Data (PS-Data) link for Optional System Controller WVCU360 with Video Multiplexer WJ-FS309 and WJ-FS316. Camera Communication mode for Optional System Controller WV-CU350 with Matrix Switcher WJ-SX350, or Matrix System500. (2) Panasonic Security Data link mode * with optional System Controller WV-CU360 ! ! ! ! ! ! ! Camera selection ( in daisy chain connection allows expansion of the system up to 16 cameras). Camera setting and operation. Alarm resetting and suspension. Remote control of WJ-FS309 and WJ-FS316 Video Multiplexers. Remote control of Pan/Tilt Heads and Camera Housings and Aux function. Remote control of motorized zoom, focus, iris on lens function. Camera resetting.

* with optional System Controller WV-CU360 and Video Multiplexer WJ-FS309/FS316.
(3) Camera Communication Data mode * with optional Matrix Switcher WJ-SX350 and controller WV-CU350, or Matrix System500, ! ! Remote control of Pan/Tilt Heads and Camera Housings and Aux function and Camera Lens function using with RS-485 data cables (max. 4000ft cable length). Camera resetting.